Description: Lock Nut - Fits our AAB192115, AAB19214, AAB19257 spindle shaft assemblies; also fit our John Deere quill / spindle assemblies.

AYP / HUSQVARNA / POULAN AAB192115 AAB192116 7", fits 36", 38" & 42" vent. decks. use Spindle Housing AAB192116. H 177.8 mm Spindle Housing. for AAB192115, AAB19237 36", 38" and 42" cut ventilated decks AYP / Craftsman / Sears Spindle Assembly replaces # 130794. Fits 36", 38", and 42" ventilated decks. Used with star center hole blades. This is the correct complete spindle assembly for the 128774 spindle housing. Husqvarna CT130, CTH150, LR100, LR110, LR111. LR12, LR120, LR121, LR122, LR125, LRH125, LT112, LT120, LT1238, LT125, LT130, LT1538, LT18542, LTH130, LTH1342, LTH140, LTH145, LTH1742, LTH18542, LTH2042, YT150, YT180, YT190, YTH130, YTH1342, YTH145, YTH150, YTH1542, YTH160, YTH180, YTH1842, 18542, YTH2042, YTH2242, YTKH1542, Craftsman 917270750, 917271910 Poulan PP1036, PP1136, PP11536, PO17542, PO1452, PD17542, SO17542, PR17542, PP1338, HD17542, PD185H42 CT 130 (HECT130B) (954170017) (1999-10) Ride Mower CT 130 (HECT130C) (954170017) (2000-02) Ride Mower CT 130 (HECT130D) (954170017) (2001-08) Ride Mower CT 130 (HECT150B) (954170019) (2000-01) Ride Mower CTH 130 (954140100A) (1999-10) CTH 150 (954140101A) (1999-10) LR 110 (954001232C) (1995-08) LR 111 (9540001212A) (1994-07) LR 12 (HAR1236A) (954000752) (1994-05) Ride Mower 130794, 180074, 532 13 07 94, 532 18 00 74, 539 11 01 58 Description: Quill Housing only. Replacement housing for our AAB192115, AAB19237 quill / spindle assembly. Fits 36", 38" and 42" ventilated decks CT130, CTH150, LR100, LR110, LR111. LR12, LR120, LR121, LR122, LR125, LRH125, LT112, LT120, LT1238, LT125, LT130, LT1538, LT18542, LTH130, LTH1342, LTH140, LTH145, LTH1742, LTH18542, LTH2042, YT150, Husqvarna YT180, YT190, YTH130, YTH1342, YTH145, 532 12 87-74 YTH150, YTH1542, YTH160, YTH180, YTH1842, AYP 128774 18542, YTH2042, YTH2242, YTKH1542, Husqvarna / AYP / Weedeater / Craftsman Mandrel Housing (bare housing) Fits 36, 38 & 42 cut ride on lawnmowers with ventilated decks using 5 point star centre hole blades, including 42 cut CTH2642TE stamped deck models. AAB19216B AAB19364 AAB19369 Spindle Shaft 7", with 2 Bearings, Screw, Nut and 3pcs Washers, for AAB192115 Nut, fits AAB192115, AAB19214, AAB19257 Size: 1-1/4" OD built in washer 3/4" HT 1/2" 18 thread Screw Bolt, Black, 3/8" 24 L 1-1/4" fits AAB192115, AAB19214 Description: Spindle Shaft Assembly. Replacement shaft assembly for our AAB192115 quill / spindle assembly. Fits 36" 38" and 42" vented decks. Star shaped blade mount, double hex external spline for pulley Description: Lock Nut - Fits our AAB192115, AAB19214, AAB19257 spindle shaft assemblies; also fit our John Deere quill / spindle assemblies. AYP 133172, 137646, Husqvarna 532 13 76 46 532 13 76 45 137266, 139729, 532137266, 532139729 Husqvarna / Craftsman & Poulan Pro spindle assembly mounting bolt / hex head self tapping screw. 5/16-18 x 1 1/4 Long Fits: Husqvarna Late model 30, 38, 42, 46, 48 & 54 cut including - 30 cut LTH126, LTH19530, 38 cut Husqvarna: LT1597, LTH1797, LTH2038, LT19538, 42 cut 532 17 39-84, 532 LTH1742T, LTH1842T, LTH2142D, YTH2042T 46 13 87-76 cut YTH2546T 48 cut YTH2548XP. 54 cut Craftsman: GTH2254XP, GTH2554XP, YTH2754T, YTH2754XP. 173984 etc. Also fits: Craftsman 42, 46, 48 & 54 cut Poulan Pro: models including - 42 cut YT3000 mod 28921, 173984 28922, 28934, YT4000 mod. 28927. 46 cut YT3000 AYP: 173984, mod 28924, YT4000 mod 28928. 48 cut PTY9000 138776, 157722 mod. 28972. 54 cut PTY9000 mod 28973. Also fits: Poulan Pro Late Model 38 & 42 cut models including - 38 cut PP14538, 17538HP. 42 cut PP22044HP. E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 1

AAB192115 Spindle Shaft 7" LH, with 2 Bearings, Screw, Nut and 3pcs Washers, for AAB19237 Description: Spindle Shaft Assembly - Fits Quill Assembly. Includes: (1) bearing and (2) washers. Uses Left Hand Thread blade bolt & pulley nut. 165482 532 16 54 82 AAB19364 AAB192119 AAB192118 AAB192118B AAB19364 AAB19369 Nut, fits AAB192115, AAB19214, AAB19237 Size: 1-1/4" OD built in washer 3/4" HT 1/2" 18 thread Spindle Housing. Fits 44"and 50" decks. For AAB19214 Quill Assy. use Spindle Housing AAB192118B Spindle Shaft (NO BEARINGS) For AAB19214, AAB192119 Overall Height: 4 7/8 (123mm) Spindle Shaft. With Bearing. Fits AAB192119 Spindle Housing OD: 3/4". Length: 4-7/8" Nut, fits AAB192115, AAB19214, AAB19237 Size: 1-1/4" OD built in washer 3/4" HT 1/2" 18 thread Screw Bolt, Black, 3/8" 24 L 1-1/4" fits AAB192115, AAB19214 Description: Lock Nut - Fits spindle shaft assemblies; also fit John Deere quill / spindle assemblies Description: Replacement housing "only" for quill assembly. Fits 44", 46" and 50" ventilated decks, using star shaped (or Y shaped) centre hole blades. Description: Husqvarna spindle shaft (includes bottom bearing), Shaft features a star shaped blade mount & double hex external spline for the pulley. Description: AYP Spindle Shaft accomodates star center hole blades.. For 44" & 50" ventilated decks. bearings included. Description: Lock Nut - Fits our 285-231, 285-234 and 285-237 spindle shaft assemblies; also fit our John Deere quill / spindle assemblies 129729, 137266, 139729, 532137266, 532139729 137152, 532 13 71 52 1375531 137553, 532137553 129729, 137266, 139729, 532137266, 532139729 2042 LS (96043004200) (2008-01) 2042 LS (96043004800) (2007-12) 2246 LS (96043004300) (2008-01) 2346 XLS (96043004500) (2008-01) 2348 LS (96043004400) (2008-01) 2348 LS (96043004900) (2008-03) 2748 GLS (96043004600) (2008-01) 2748 GLS (96043005000) (2008-03) 2754 GLS (96043004700) (2008-01) GT 2254 (96023000500) (2005-05) GT 2254 (96025000200) (2005-05) GT 2254 (96025000201) (2005-05) AYP GT 2254 (96025000202) (2005-06) 138776, 157722, GTH 2248 XPA (954567888) (2002-01) 173984 GTH 2248 XPB (954567888) (2002-10) Husqvarna GTH 2248 XPC (954567888) (2003-07) 532 13 87 76 GTH 2254 XP (96023000200) (2005-05) 532 15 77 22, GTH 2254 XP (96023000201) (2005-06) 532 17 39 84 GTH 2254 XPA (954571229) (2004-08) 539 10 76 30 GTH 2254 XPB (954571229) (2004-08) GTH 2350 (GTHK2350A) (954568540) (2002-07) GTH 2448 T (917.279260) (960430009) (2006-06) GTH 2448 T (96043000900) (2006-06) GTH 2448 T (96043000901) (2006-06) GTH 2454 T (96043002300) (2006-06) GTH 250 (HEGTH250A) (954170055) (2002-02) GTH 2548 (917.279100) (960230003) (2004-12) E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 2

AAB19150 AAB19370 CUB CADET Spindle Assy 48" and 54" Decks (Longer than 174356) Found on 54" cut decks and 2007 (2) blade 46" cut decks; also found on newer 42" cut Taller version of our??????. 7-1/4" overall height. Note the only difference between 187292 and 192870 is that 187292 has a grease fitting Screw Bolt, Black, fits Quill 130794. 5/16" 18 L 1-1/4" Self Tapping Bolt Models AYP decks. Fits Craftsman model# 944.606041 & 944.606042 / DYS 4500 series. Husqvarna 2042lLS, 2246LS, 2346XLS, LOYTH20F42T, LTH1538, YT1942T, YTH1542XP, YTH18542, YTH20B42, YTH20F42T, YTH20K46, YTH2042, YTH2146XP, YTH2242T, YTH2246 Craftsman 917276120, Poulan PBGT26H54, PB26H54YT, PO1542LT, 380ZX, 2348 LS (96043004400) (2008-01) 2348 LS (96043004900) (2008-03) 2748 GLS (96043004600) (2008-01) 2748 GLS (96043005000) (2008-03) 2754 GLS (96043004700) (2008-01) GT 2254 (96023000500) (2005-05) GT 2254 (96025000200) (2005-05) GT 2254 (96025000201) (2005-05) GT 2254 (96025000202) (2005-06) GTH 2254 XP (96023000200) (2005-05) GTH 2254 XP (96023000201) (2005-06) GTH 2254 XPA (954571229) (2004-08) GTH 2254 XPB (954571229) (2004-08) GTH 2448 T (917.279260) (960430009) (2006-06) GTH 2448 T (96043000900) (2006-06) GTH 2448 T (96043000901) (2006-06) GTH 2454 T (96043002300) (2006-06) GTH 2554 XPA (954568427) (2004-08) GTH 2554 XPB (954568427) (2004-08) GTH 26 K 54 (96043003100) (2006-11) GTH 26 K 54 T (96043001100) (2006-03) Ride Models: 2042 LS (96043004200) (2008-01) 2042 LS (96043004800) (2007-12) 2246 LS (96043004300) (2008-01) 2346 XLS (96043004500) (2008-01) 2348 LS (96043004400) (2008-01) 2348 LS (96043004900) (2008-03) 2748 GLS (96043004600) (2008-01) 2748 GLS (96043005000) (2008-03) Husqvarna 532 18 72-92 532 19 28-70 Craftsman 192870 Poulan Pro: 532 19 28-70 192870 AYP: 187292 192870 2754 GLS (96043004700) (2008-01) GT 2254 (96023000500) (2005-05) GT 2254 (96025000200) (2005-05) GT 2254 (96025000201) (2005-05) GT 2254 (96025000202) (2005-06) 138776, 157722, GTH 2248 XPA (954567888) (2002-01) 173984 GTH 2248 XPB (954567888) (2002-10) 532 17 39 84 GTH 2248 XPC (954567888) (2003-07) GTH 2254 XP (96023000200) (2005-05) GTH 2254 XP (96023000201) (2005-06) GTH 2254 XPA (954571229) (2004-08) GTH 2254 XPB (954571229) (2004-08) GTH 2350 (GTHK2350A) (954568540) (2002-07) GTH 2448 T (917.279260) (960430009) (2006-06) GTH 2448 T (96043000900) (2006-06) GTH 2448 T (96043000901) (2006-06) GTH 2454 T (96043002300) (2006-06) GTH 250 (HEGTH250A) (954170055) (2002-02) AAR11962 Spindle Assembly Fits some 50" decks, Quill / Spindle Assembly - Fits 50" cut decks. Fits blades with star center hole. Found on L1050, LT1050, SLT1550 and RZT 50 riders with 50" deck & SLT1554 with 54" deck. Spindle shaft has 12 point spline on one end with a 6 point star on the other Massey Ferguson / MTD / Cub Cadet / Troy Bilt 50 & 54 Cut Spindle Assembly. Fits: Massey Ferguson 50 Cut deck MF50-23SD, MF50-22ZT 918-04125, models. Fits: Cub Cadet 50 Cut i1050, LT, SLT & 918-04125B RZT mowers with Z Force Decks using star centre 918-04126A, hole blades including: Cub Cadet 50 Cut i1050 918-04126, 17AF9BKP330 Z Turn 2008 models, 17AF9BK330 618-04125, 50 Cut hydrostatic drive 20hp 2008 models, 618-04125B, 17A12ACP709 RZT series tractor 50 Cut 17hp 618-04126A, 2007 models. Cub Cadet 54 Cut SLT1554 618-04126 13AK11CK630 27hp Hydro 2006, SLT1554 13AK11BK330 23hp Hydro 2009 model ride on lawnmowers. MTD Yardman 50 Cut 13AP604P371 Autodrive 23hp 2008 models, MTD RZT-50 17AF2ACP370 ZTR 22hp 2009 models. Troy Bilt 50 Cut 13AP60TP766 Auto Drive 23hp 2008 models, Troy Bilt RZT-50 17AF2ACP309 ZTR 22hp 2009 models E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 3

AARM80-12-012 YAR618-0427A YAR918-3129C HUSQVARNA AARM80-12-001 HUSTLER AAR8488 AAR11452 AAR8488 JOHN DEERE AAR11206 Cub Cadet 42" Deck Spindle Assembly Spindle Assembly Husqvarna Spindle Assembly fits 48" and 54" decks 7-1/4" overall height. Note the only difference between 187292 and 192870 is that 187292 has a grease fitting Bearing Spindle Assembly Fast Trak, Mini Z & Super Mini Z Bearing Fits L100, L110, L120, L130 42", 48" DECKS 6-3/8" OVERALL HT Quill / Spindle Assembly - Fits 38" & 42" decks. Fits blades with star center hole. Found on 1170, 1600, 1800 & RTZ mowers; also found on MTD / Troy Bilt & White, 700 series. Troy Bilt models: 13AM762F765, 13AH762F752 Cub Cadet / MTD Yardman & Troy Bilt Spindle Assembly. Fits: Selected 42 cut decks using star centre hole 918-0427C, 918- blades 0427A, 918- and fitted with a 5 9/16 spindle pulley including - 0427, 618- Cub Cadet 42 0427C, 618- cut RZT 17, 17AA5A4G710 B&S 17hp ZTR 2004 0427A, 618- models, RZT 42, 0427, 918-17BA5A4G630 B&S 17hp ZTR 2005 models, RZT 0324, 618-42, 17BA5A4G710 0324A, 618- B&S 17hp ZTR 2006 models. MTD Yardman 42 cut 0324 13AT604G671 B&S 18hp Auto Drive 2000 model ride on lawnmower models. Troy Bilt 42 cut 17AA5AAG766 B&S 19hp ZTR 2006 models, 13BX609G063 Kohler 16hp 2002 model ride on lawnmower models. Pulley Diam: 5 9/16 (141mm) Description: Quill / Spindle Assembly - Fits series models 2130, 2146, 2155, 2164 and 2166, Z-Force, 918-3129C, GT series and LT series mowers with 38", 42" and 918-3129B, 44" cut decks using round hole blades. Cub Cadet 918-3129A, Spindle Assembly fits Z-force, GT series & LT series 918-3129, mowers with 38" & 42" deck using round hole blade. 618-3129C, Use our #????? bearing &????? race. Replaces 618-3129B, Cub Cadet # 918-3129C, 918-3129A, 618-3129C, 618-3129A, 618-3129A, 918-3129B, 918-3129, 618-3129B & 618-618-3129 3129 Found on 54" cut decks and 2007 (2) blade 46" cut decks; also found on newer 42" cut AYP decks. Fits Craftsman model# 944.606041 & 944.606042 / DYS 4500 series. Taller version of our 285-415. 2348, 2748, 2754, GT2254, GTH2254, GTH2448, GTH2554, GTH26K, GTH2648, GTH2654, GTH2754, LGT2654, YTH1848, YTH2348, YTH2454, LTG2554 2348 LS (96043004400) (2008-01) 2348 LS (96043004900) (2008-03) 2748 GLS (96043004600) (2008-01) 2748 GLS (96043005000) (2008-03) 2754 GLS (96043004700) (2008-01) 187292 GT 2254 (96023000500) (2005-05) 192870, GT 2254 (96025000200) (2005-05) GT 2254 (96025000201) (2005-05) GT 2254 (96025000202) (2005-06) GTH 2254 XP (96023000200) (2005-05) GTH 2254 XP (96023000201) (2005-06) GTH 2254 XPA (954571229) (2004-08) GTH 2254 XPB (954571229) (2004-08) GTH 2448 T (917.279260) (960430009) (2006-06) GTH 2448 T (96043000900) (2006-06) GTH 2448 T (96043000901) (2006-06) GTH 2454 T (96043002300) (2006-06) GTH 2554 XPA (954568427) (2004-08) GTH 2554 XPB (954568427) (2004-08) GTH 26 K 54 (96043003100) (2006-11) GTH 26 K 54 T (96043001100) (2006-03) Ride BEARING FITS TOP AND BOTTOM OF SPINDLE 532 18 72 92 532 19 28 70, 539 11 20 57 077123 For 350595K 796235X Fast Trak, Mini-Z, Super Mini Z 783506 BEARING FITS TOP AND BOTTOM OF SPINDLE 077123 Description: Quill / Spindle assembly. Fits John Deere L-100, L105, L107, L108, L110, L111, L118, L120 and L130 models with 42" and 48" decks. Fits GY20050, current Home Depot models (2005 etc). Comes GY20785 complete with zerk / grease fitting. Sabre, Scott, Sabo & L120 Lawn Tractors E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 4

AAR14168 MTD AAB19206 Spindle Assembly Shaft length: 5-3/8", Splined shaft. 48",54" & 60" mower decks for F620,F680 & F687 Z- TRACKS 54", 60" & 72" mowers 4100,4200,4300,4400,4500,4600,4700 compact utility tractors M653 Mid mount Z- trak 60" & 72" side discharge mower decks (7 Iron) and 600L mcs for 1400/1500 series front mowers 62" & 72" rear discharge mower decks for 1400/1500 series front mowers 737 Mid-Mount Z-Trak 727 Mini-Frame Z-Trak 657 Quik-Trak mowers TCA13807 777 Max-Frame Z-Trak 657A & 667A Quik-Trak M655 & M665 Mid-Mount Z-Trak 667 Quick-Trak 757 Mid-Mount Z-Trak 797 Max-Frame Z-Trak 54",54C,60",62C,72" mower decks for 2210,4010,4110,4115,4210,4310,4410,4510,4610,4 710 compact utility tractors Mower decks & material collection system for X465,X475,X485,X495,X575,X585,X595,X700,X720, X724,X728,X740,X744,X748 Quill / Spindle assembly - Fits MTD 38" and 42" decks. Model series 600 and 805, also 42" models 700-739 and 750-769. Frame 310, 311, 312, 315, 316, 317, 318, 319, 320, 321, 322, 321, 324, 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344,, 345, 246, 347, 348, 349, 350, 351, 353, 354, 355, 356, 357, 432, 441, 450, 451 452, 455, 472, 506, 510, 530, 650, 836, models 1990 to 1997 Lawn Tractors 135C451F382 (1995) Lawn Tractor 130-310D000 (1990) Lawn Tractor 130-311D000 (1990) Lawn Tractor 130-312D000 (1990) Lawn Tractor 917-0900A 130-313D000 (1990) Lawn Tractor Replaces 130-314D000 (1990) Lawn Tractor 717-0900, 130-315D000 (1990) Lawn Tractor 717-0900A 130-316D000 (1990) Lawn Tractor 130-317D000 (1990) Lawn Tractor 130-318D000 (1990) Lawn Tractor 130-319D000 (1990) Lawn Tractor 130-432-000 (Deck E & Deck F) (1990) Lawn Tractor 130-530D000 (1990) Lawn Tractor 130-530D009 (1990) Lawn Tractor 322-105 (1986) Lawn Tractor 130-650E000 (1990) Lawn Tractor 130-836-000 (1990) Lawn Tractor 130-445E352 (1990) Lawn Tractor 130-452F087 (1990) Lawn Tractor 130-452F129 (485-209) (1990) Lawn Tractor E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 5

AAB19207 fits models 600 and 805. 32" deck G, 38" deck F. 42" 5-7/16" Splined Shaft Frame 432, 433, 445, 450, 451, 452, 470, 471, 508, 600, 604, 640, 643, 650, 652, 653, 654, 658, 659, 660, 661, 663, 665, 667, 668, 669, 670, 671, 673, 675, 677, 678, 679, 684, 689, 695, 697, 699, 704, 734, 784, 805, "G"and "F" Deck 133H671F382 (1993) Lawn Tractor 133K679G382 (1993) Lawn Tractor 133P670G382 (1993) Lawn Tractor 136C451F382 (1996) Lawn Tractor 136L673F382 (1996) Lawn Tractor 136M679G192 (1996) Lawn Tractor 135C451F382 (1995) Lawn Tractor 135L673G382 (1995) Lawn Tractor 135M679G382 (1995) Lawn Tractor 134L670G382 (1994) Lawn Tractor 134L673G382 (1994) Lawn Tractor 134M679G382 (1994) Lawn Tractor 134Y451F382 (1994) Lawn Tractor 130-432-000 (Deck E & Deck F) (1990) Lawn Tractor 130-600-000 (Series 600) (1990) Lawn Tractor 130-640F013 (68433) (1990) Lawn Tractor 130-643F000 (1990) Lawn Tractor 136C450F129 (178-326) (1996) Lawn Tractor 136E470F023 (1996) Lawn Tractor 136G690G747 (1996) Lawn Tractor 130-650F000 (1990) Lawn Tractor 130-650G000 (1990) Lawn Tractor 130-652F000 (1990) Lawn Tractor 130-653F000 (1990) Lawn Tractor Description: Quill / Spindle assembly - Fits MTD 44" deck, outer quill; also fits 46" cut, both centre and right hand quill. For 800 thru 849 series "H" decks. Shaft length: 4.812", Splined shaft. Frame 800, 801, 802, 803 804, 805, 806, 807, 808, 809, 849 130-800-000 (1990) Lawn Tractor 130-800H000 (1990) Lawn Tractor 130-800H009 (1990) Lawn Tractor 130-801-000 (1990) Lawn Tractor 130-802-000 (1990) Lawn Tractor 753-05319 Replaces 717-0906, 717-0906A, 717-0916, 917-0906A, 917-0916

AAB19208 AAR9288 left hand side quill for "H" decks 6-5/16" Splined Shaft Spindle assy. 38'' 42" Deck with 6 point star centre hole. 600 Seris 1997 & newer models Description: Quill / Spindle assembly - Fits MTD 44" cut deck, centre quill. Use with double pulley; also fits 46" cut, left hand quill. For 800 thru 849 series "H" decks. Shaft length: 6-3/8", Splined shaft Frame 800, 801, 802, 803 804, 805, 806, 807, 808, 809, 824, 846, 849 130-800-000 (1990) Lawn Tractor 130-800H000 (1990) Lawn Tractor 130-800H009 (1990) Lawn Tractor 130-801-000 (1990) Lawn Tractor 130-802-000 (1990) Lawn Tractor 130-803-000 (1990) Lawn Tractor 130-804-000 (1990) Lawn Tractor 130-805-000 (1990) Lawn Tractor 130-806-000 (1990) Lawn Tractor 130-807-000 (1990) Lawn Tractor 130-808-000 (1990) Lawn Tractor 130-808H000 (1990) Lawn Tractor 130-809-000 (1990) Lawn Tractor 130-809H000 (1990) Lawn Tractor 130824H (1990) Lawn Tractor 130-800H031 (1990) Lawn Tractor 130-802H206 (1990) Lawn Tractor 140-849H023 (1990) Lawn Tractor 13735-9 (1989) Lawn Tractor 13765-9 (1989) Lawn Tractor 190-806-000 (1989) Lawn Tractor 190-846-000 (1989) Lawn Tractor 131-800H000 (Deck H) (1991) Lawn Tractor 131-801H000 (Deck H) (1991) Lawn Tractor Description: Quill / Spindle assembly - Fits MTD 38" and 42" decks. Fits star hole blades. Newest style "X" housing, 1998 and newer. Pulley NOT included Frame 450, 451, 453, 650, 660, 662, 683, 685, 688, 694, 695, 698, 1997 and newer 13AC650F000 (2004) Lawn Tractor 13AC650F700 (2004) Lawn Tractor 13AD685G000 (2004) Lawn Tractor 13AD685G700 (2004) Lawn Tractor 13AD688G722 (2004) Lawn Tractor 13AD695G000 (2004) Lawn Tractor 13AD695G700 (2004) Lawn Tractor 13AD698G300 (2004) Lawn Tractor 13AD698G722 (2004) Lawn Tractor 13AF685G700 (2004) Lawn Tractor 13AF688G722 (2004) Lawn Tractor 13AF695G700 (2004) Lawn Tractor 13AF698G722 (2004) Lawn Tractor 13AJ698G300 (2004) Lawn Tractor 13AJ698G722 (2004) Lawn Tractor 13AD688G300 (2004) Lawn Tractor Parts 13AJ688G722 (2004) Lawn Tractor Parts 13AH660F382 (1998) Lawn Tractor 13AC450F382 (1997) Lawn Tractor 13A5453F733 (1997) Lawn Tractor 13A5453F033 (1997) Lawn Tractor 13A5453F733 (1998) D112Lawn Tractor 13AE451F033 (1998) Lawn Tractor 13BH660F033 (2001) Lawn Tractor 13AC650F304 (2004) Lawn Tractor 717-0913, 917-0913 918-0138C Replaces 618-0138, 618-0142, 918-0138, 918-0138A, 918-0142, 918-0142A E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 7

AAB19231 AAB19228 Quill / Spindle assembly. Frame 604, 614, 617, 618, 809, 825, 848 Lawn Tractors 13AT618H300 (2003) Lawn Tractor Parts 14AU848H300 (2002) Garden Tractor 13AQ617H118 (2003) Lawn Tractor 14AK825H033 (1997) Garden Tractor 14AS825H033 (1997) Garden Tractor 13AT618H300 (2004) Lawn Tractor 13AT618H304 (2004) Lawn Tractor Spindle assy. 13AT618H372 (2004) Lawn Tractor 46'' Deck 13AT618H401 (2004) Lawn Tractor L.H 13AT618H720 (2004) Lawn Tractor 6point star hole blade 13AT618H730 (2004) Lawn Tractor for 1997 & newer 13AT618H301 (2004) Lawn Tractor models. 13AT618H709 (2004) Lawn Tractor Overall Height: 6.000". 13AT618H371 (2004) Lawn Tractor Fits left hand side on 13AT618H307 (2004) Lawn Tractor MTD 46" deck, 800 13AT618H513 (2004) Lawn Tractor series. (1997 and newer). 13AT618H713 (2004) Lawn Tractor Fits star hole blades. 13AT618H382 (2004) Lawn Tractor 13AT618H000 (2004) Lawn Tractor 13AT618H121 (2004) Lawn Tractor 13AT618H205 (2004) Lawn Tractor 13AT618H705 (2004) Lawn Tractor 13AT618H706 (2004) Lawn Tractor 13AT618H026 (2004) Lawn Tractor 13AT618H726 (2004) Lawn Tractor 13AT618H054 (2004) Lawn Tractor 13AT618H745 (2004) Lawn Tractor 13AT618H754 (2004) Lawn Tractor Spindle assy 46" 16/18 hp Stare hole blades from 1994-1997 For double pulley spindle. (spindle shaft AAST285-336) 5-3/4"High For deck D Description: Quill / Spindle assembly - For MTD 46" deck. Fits star hole blades. Left hand spindle for 800 series. (1994 thru 1997). 146S848H372 (1996) Lawn Mower 143p828h118 Tractor Mower 918-0241B Replaces 918-0431C, 618-0431, 918-0431B, 918-0431, 918-0241, 618-0241, 918-0241 918-0117B Replaces 618-0112, 618-0117, 918-0117, AARM80-11-731 AARM80-11-731 Spindle assy 42", 46" 16/18 hp, star hole blades from 1994-1997. 4-9/16"HEIGH 600 and 800 series RIGHT HAND and senter Spindle assy 4-1/4" Overall Height, Bottom spline OD: 1", Top spline OD: 3/4", End of threaded shaft to metal plate: 2-1/8", End of splined shaft to metal plate: 2-3/16", 5/8"-18 THD Thread. Uses single pulley; 1993 thru 1996, (3) for 600 series riders or (2) for 800 series riders. Frame 600, 668, 670, 675, 678, 679, 695, 698, 699, 849, 133P679H382 (1993) Lawn Tractor 136G679H023 (1996) Lawn Tractor 135-600-000 (1995) Lawn Tractor 135G679H000 (1995) Lawn Tractor 135O695H352 (1995) Lawn Tractor 135P668H000 (1995) Lawn Tractor 135P670H000 (1995) Lawn Tractor 135P679H000 (1995) Lawn Tractor 918-0116C 136O675H302 (1996) Lawn Tractor Replaces 136O695H352 (1628279) (1996) Lawn Tractor 618-0111, 136P695H352 (1670860) (1996) Lawn Tractor 918-0111, 136Q695H352 (1996) Lawn Tractor 618-0116P, 134P679H033 (1994) Lawn Tractor 618-0116, 135O679H033 (1995) Lawn Tractor 918-0116 143P849H033 (7008824) (1993) Garden Tractor 144P849H033 (1994) Garden Tractor 145Q849H033 (1995) Garden Tractor 133P660H000 (1993) Lawn Tractor 133P670H087 (1993) Lawn Tractor 133P679H000 (1993) Lawn Tractor 133P678H000 (1993) Lawn Tractor 133Q668H702 (1250695) (1993) Lawn Tractor 133Q678H736 (4803110) (1993) Lawn Tractor 134O695H352 (1994) Lawn Tractor 134O699H352 (1994) Lawn Tractor 134P668H000 (1994) Lawn Tractor Description: Quill / Spindle assembly - Fits MTD 50" decks - Right hand and Centre spindle. 918-0118 E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 8

AAR9727 AAR9286 AAST285-105 Spindle assy. Left hand side spindle. 6" Overall Height. Bottom spline OD: 1", - Top spline OD: 3/4", End of threaded shaft to metal plate: 3-7/8", End of splined shaft to metal plate: 2-3/16", 5/8"-18 THD Thread. Spindle assy. 46'' Deck R.H & centre 6 point star hole blade for 1997 and newer models (2000) 5-1/8"heigh Spindle assy. 4-7/8" overall height. Fits star hole blades. Left hand spindle for 600 series. Includes: pulley Fits later star hole blades Description: Quill / Spindle assembly - Fits MTD 50" decks - 918-0119, Description: Quill / Spindle assembly without pulley. (Right and Center Spindle). Fits MTD 46" decks and also used on newer Toro lawn tractors. For 600 & 800 series mowers, 1997 to current. Fits star hole blades. Takes: (3) for 600 series riders. For 800 series tractors you require: (2 ) Frame 604, 605, 614. 617, 618, 683, 688, 694, 698, 771, 772, 795, 808, 825, 848, Lawn Tractors 1997-2008 13AG688H300 (2004) Lawn Tractor 918-0240C 13AG688H722 (2004) Lawn Tractor Replaces 618-31AT605H718 (2006) Pro Tractor 0240, 618-13AL771H004 (2009) Lawn Tractor 0240A, 618-13AL795H004 (2009) Lawn Tractor 0430, 618-13AL771H004 (2008) Lawn Tractor 0430A, 918-13AL795H004 (2008) Lawn Tractor 0240, 918-13AT618H300 (2003) Lawn Tractor Parts 0430A, 918-14AG808H300 (2004) Garden Tractor 0430B, 918-14AT808H722 (2004) Garden Tractor 0430C, 918-14AT808H300 (2003) Garden Tractor 0430, Toro 14AU848H300 (2002) Garden Tractor 1120311 13AQ617H118 (2003) Lawn Tractor 13A6698H033 (1998) Lawn Tractor 14AK825H033 (1997) Garden Tractor 14AS825H033 (1997) Garden Tractor 13AT605H718 (2006) 46" Pro Tractor 14AI808H718 (2004) 46" Pro Tractor 13AT618H300 (2004) Lawn Tractor 14AG808H722 (2004) Garden Tractor 13AG688H304 (2004) Lawn Tractor Description: Quill / Spindle assembly - For MTD 42" deck. Fits later models. Frame 604, 608, 609, 614, 624 13AA609G063 13AD608G300 (2003) Lawn Tractor 13AL608G300 (2002) Lawn Tractor 13AS608G033 (2000) Lawn Tractor 13AK608G033 (2001) Lawn Tractor 13AS608G033 (2001) Lawn Tractor 13AQ609G033 (2003) Lawn Tractor 13AD608G304 (2003) Lawn Tractor 13AD608G372 (2003) Lawn Tractor 13AD608G401 (2003) Lawn Tractor 13AD608G720 (2003) Lawn Tractor 13AD608G730 (2003) Lawn Tractor 13AD608G301 (2003) Lawn Tractor 13AD608G709 (2003) Lawn Tractor 13AD608G371 (2003) Lawn Tractor 13AD608G307 (2003) Lawn Tractor 13AD608G513 (2003) Lawn Tractor 13AD608G713 (2003) Lawn Tractor 13AD608G382 (2003) Lawn Tractor 13AD608G000 (2003) Lawn Tractor 13AD608G121 (2003) Lawn Tractor 13AD608G205 (2003) Lawn Tractor 13AD608G705 (2003) Lawn Tractor 13AD608G706 (2003) Lawn Tractor 13AD608G026 (2003) Lawn Tractor 13AD608G726 (2003) Lawn Tractor 13AD608G054 (2003) Lawn Tractor 13AD608G745 (2003) Lawn Tractor 918-0574C Replaces, 918-0574, 618-0565, 918-0574C E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 9

AAST419-500 AAR12219 Spindle Blade Hex Nut for Size: 5/8"-18 UNF thread Spindle assy. Fits blades with star center hole. 12 point spline on pulley end with a 6 point star on the blade end. Overall height: 6-1/2". Description: 254-546-000 (1994) Edger 254-556-000 (1994) Edger 255-546-000 (1995) Edger 255-556-000 (1995) Edger 13705S (1985) Lawn Tractor 195-797-000 (1985) Lawn Tractor 195-798-000 (1985) Lawn Tractor 195-799-000 (1985) Lawn Tractor 195-802-000 (1985) Lawn Tractor 13514C (1986) Lawn Tractor 13517C (1986) Lawn Tractor 133H671F382 (1993) Lawn Tractor 133K679G382 (1993) Lawn Tractor 133P670G382 (1993) Lawn Tractor 13AC450F382 (1997) Lawn Tractor 136C451F382 (1996) Lawn Tractor 136L673F382 (1996) Lawn Tractor 136M679G192 (1996) Lawn Tractor 135C451F382 (1995) Lawn Tractor 135L673G382 (1995) Lawn Tractor 135M679G382 (1995) Lawn Tractor 134L670G382 (1994) Lawn Tractor 134L673G382 (1994) Lawn Tractor 134M679G382 (1994) Lawn Tractor 134Y451F382 (1994) Lawn Tractor 136B560B302 (1996) Lawn Tractor 245-635-000 (1985) Log Splitter 130-310D000 (1990) Lawn Tractor 130-311D000 (1990) Lawn Tractor Quill / Spindle Assembly. For Cub Cadet LT1040, LT1042 and RZT mowers with 42" decks. Also Toro models: LX420 & LX425 or 13ZX60RG544. Frame 761, 771, 791 13A3761G700 (2005) Lawn Tractor 13A3771G700 (2005) Lawn Tractor 13A3791G700 (2005) Lawn Tractor 31AO791G718 (2005) Pro Tractor 17AC2ACG004 RZT-42 (2008) 17-Z-Series 17AE2ACG004 (2009) 17-Z-Series 17AF2ACP004 (2009) 17-Z-Series 13AO791G718 (2005) 42" Lawn Tractor 13A3761G304 (2005) Lawn Tractor 13A3761G372 (2005) Lawn Tractor 13A3761G401 (2005) Lawn Tractor 13A3761G720 (2005) Lawn Tractor 13A3761G730 (2005) Lawn Tractor 13A3761G301 (2005) Lawn Tractor 13A3761G709 (2005) Lawn Tractor 13A3761G371 (2005) Lawn Tractor 13A3761G307 (2005) Lawn Tractor 13A3761G513 (2005) Lawn Tractor 13A3761G713 (2005) Lawn Tractor 13A3761G382 (2005) Lawn Tractor 13A3761G000 (2005) Lawn Tractor 13A3761G121 (2005) Lawn Tractor 13A3761G205 (2005) Lawn Tractor 13A3761G705 (2005) Lawn Tractor 13A3761G706 (2005) Lawn Tractor 13A3761G026 (2005) Lawn Tractor 712-0318, 712-0417 912-0318 918-0624A Replaces 618-0559, 618-0624, 918-0624, 918-0559, 918-0624, 918-0659A Toro 1120460 E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 10

AAR9145 AAB192128 MURRAY AAB192120B AAB19210B AAR8308 Spindle brake disc for drive pulley Fits 38" & 42" cut Spindle Shaft,. 3-3/4" L.562" diameter 3/8"-24 thread. Quill Assy, 5/8" ID 2-5/8" HT 7" OD Also fits Stihl Viking MT432 Shaft Spacer 42" Deck Description: Quill Brake Disc - For drive pulleys on MTD 38" and 42". Model series 600, 800, 805, 739, 750-769 135-669-000 (1985) Lawn Tractor 13AC450F382 (1997) Lawn Tractor 136C451F382 (1996) Lawn Tractor 136L673F382 (1996) Lawn Tractor 136M679G192 (1996) Lawn Tractor 135C451F382 (1995) Lawn Tractor 135M679G382 (1995) Lawn Tractor 134L670G382 (1994) Lawn Tractor 134L673G382 (1994) Lawn Tractor 134M679G382 (1994) Lawn Tractor 134Y451F382 (1994) Lawn Tractor 130-310D000 (1990) Lawn Tractor 09322 130-311D000 (1990) Lawn Tractor 130-312D000 (1990) Lawn Tractor 130-313D000 (1990) Lawn Tractor 130-314D000 (1990) Lawn Tractor 130-315D000 (1990) Lawn Tractor 130-316D000 (1990) Lawn Tractor 130-317D000 (1990) Lawn Tractor 130-318D000 (1990) Lawn Tractor 130-319D000 (1990) Lawn Tractor 130-432-000 (Deck E & Deck F) (1990) Lawn Tractor 130-600-000 (Series 600) (1990) Lawn Tractor 13618C (1986) Lawn Tractor 13648C (1986) Lawn Tractor 13649C (1986) Lawn Tractor 196-800-000 (1986) Lawn Tractor Description: Variator Shaft - Fits MTD / White models 666 and 686. Also found on Yardman Quill Assembly for Murray. For new style decks. Fits models 30500X92A and 30534X1A. For 30" rear engine riders. 30502, 30503, 30505, 30544, 30576, 30577, 31720, 31722, 31720x11B (2000) 30" Lawn Tractor 30503x11A (2000) 30" Rear Engine Lawn Tractor 30505x92A (2000) 30" Rear Engine Lawn Tractor 30577x31B (2000) 30" Rear Engine Lawn Tractor 30577x8A (2000) 30" Rear Engine Lawn Tractor 31722x95A (1999) 31" Lawn Tractor 31720x11C (1999) 31" Lawn Tractor 31720x51C (1999) 31" Lawn Tractor 30503x11A (1999) 30" Rear Engine Rider 30576x10D (1999) 30" Rear Engine Rider 30544X92D (1996) Rear Engine Riders Quill / Spindle Assembly for Murray. Comes complete with bearings, spacer and grease fitting. Fits model 38608X12E. LT, GT rail frame 405014x92A (2002) 40" Lawn Tractor 405015x92A (2002) 40" Lawn Tractor 40508x92E (2002) 40" Lawn Tractor 42515x92B (2002) 42" Lawn Tractor 42516x92B (2002) 42" Lawn Tractor 42598x92A (2002) 42" Lawn Tractor 461007x92A (2001) 46" Lawn Tractor 46104x8C (2001) 46" Lawn Tractor 521613x89A (2001) 52" Lawn Tractor 38502x51E (2001) 38" Lawn Tractor 38502x98D (2001) 38" Lawn Tractor 46102x6B (2000) 46" Lawn Tractor 46107x92A (2000) 46" Lawn Tractor 46103B (2000) 46" Lawn Tractor 52101x92A (2000) 52" Lawn Tractor 46104x14A (2000) 46" Lawn Tractor 52161x89B (2000) 52" Lawn Tractor 46104x8B (2000) 46" Lawn Tractor 38502x51D (2000) 38" Lawn Tractor 38502x52A (2000) 38" Lawn Tractor 38711x42A (2000) 38" Lawn Tractor 38502x86B (2000) 38" Lawn Tractor 38560x81A (2000) 38" Lawn Tractor 38502x98C (2000) 38" Lawn Tractor 38711x67C (2000) 38" Lawn Tractor 38711x73C (2000) 38" Lawn Tractor 38710x99A (2000) 38" Lawn Tractor 46106x89B (2000) 46" Lawn Tractor 40507x8B (2000) 40" Lawn Tractor 738-0569, 938-0569 55962, 55962MA, 455962, 455962MA, 55962E701 8-38222, 7-39004 23213 492574MA Replaces 20551, 24384, 24385, 692574MA, 90905, 090905MA, 92574, 92574MA, 492574 Stihl Viking 6121 009 2574 E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 11

AAB192123 AAB192131 Spindle Shaft, 6-1/2" L 5/8" OD, Threads: 1/2"-20 UNF, shaft has (3) 5/32" keyways. (#505 woodruff keyseats) Spindle Shaft, 6-1/8" L 5/8" OD, Threads: 1/2"-20 UNF, shaft has (2) 5/32" keyways. (#505 woodruff keyseats) Description: Jackshaft for Murray. Long shaft for 1978 thru 1988-36" cut. Description: Jackshaft for Murray. Long shaft for 1976 thru 1990-42" cut. 23180 21024MA, 20616 AAB192129 Spindle Shaft, 6-3/8" L Description: Jackshaft (splined) - Fits Murray 46" 5/8" OD, and 30" cut Riders. Shoulder OD: 1-1/4" Spline OD:.600", Threads: 9/16"-18 UNF. 91921, 491921 AAB192126 Spindle Shaft, 7-3/4" L 5/8" OD, Shoulder OD: 1-1/4", Spline OD:.600", Threads: 9/16"-18 UNF Description: Jackshaft (splined) - Fits Murray 36", 38", 40" and 42" cut splined shaft models. Use nut 15X100MA AAB19361 Murray 91922, 491922, 491922MA AAR9906 AAB19361 SCAG AAR5722 AAR9153 AAR5999 Spindle Jackshaft fits 38'', 46'', 48'' & 50'' LTdecks. 46" + 52" GT rail frame Nut AAR8901 7.03" long, splined both ends. Nut, 9/16"-18 UNF Thread, fits Splined Jackshafts Spindle Assembly Size: 5/8" ID 1" OD shaft 7-3/16" overall HT; Keyway: 1/4". With grease fitting Spindle Assembly CAST IRON Shaft OD: 1" Shaft ID: 5/8" Ht: 7-3/16" 1/4" Key Way w/grease Fitting Spinbdle Shaft Size: Pulley OD:1" ID: 5/8" OD:.987" Length: 7-3/16" Description: Jackshaft Assembly for Murray. Fits 38", 40", 42", 46", 48" & 50" LT rail frame, 46" GT rail frame and old style 52" GT and 30" export lawn tractors, also fits Scotts 42" LT and 52" GR rail frame tractors. Description: Jackshaft hex nut for riding mowers. Fits splined jackshafts. Description: Quill / Spindle Assembly - Fits all Scag walk behind mowers. Shaft Length: 7-3/16". Ferris 36", 48" and 61" walk behind mowers, Snapper 36", 48" and 60" Pro series walk behinds. WRIGHT MFG 48", 52" and 61" decks, serial numbers 20425 and higher for Wright Stander mowers (NOT the Sentar) With grease fitting 774091, 774091MA 94129, 094129, Scotts 774091, 94129 15x100 15X100MA 46020, 461663, 46400, 46631 Snapper 52457 46020, 461663, 46400, 46631 461397 WRIGHT MFG 71460007 43001-02 Jacobsen 182246 WRIGHT AAR5722 ID:5/8", OD:1", Height:7 3/16" overall, 1/4" keyway, With grease fitting FIXED DECK STANDER 48",52",61" W/ SERIAL 49704 & BELOW48", 52" and 61" decks, serial numbers 20425 and higher for Wright Stander mowers (NOT the Sentar) ENCORE 71460007 FERRIS 1530301 FERRIS 5030301 LESCO 050194 SCAG 46020 46400 WRIGHT MFG 71460007 285-201 / 5722 / 82-309 E-mail: info@turfmaster.co.za Website: www.turfmaster.co.za 12