Up to 350 Nm rated 9 Mra line Heavy duty, planetary to bevel, right-angle, servo gearbox Backlash: from 15 to 5 minutes* Hollow shaft, double shaft or quadri-shaft versions available Efficiency: from 91% to 96%* Up to 13 standard ratios* / custom ratios available High torque versions available upon request Easy 1 minute clamping onto any motor shaft (self-locating input flange) Standard case temperature range is 20 C to +90 C. Consult us for higher or lower temperature use IP 65 standard waterproofness. IP-67 & 1500 psi water jets available Washdown stainless steel version available Optional lubrication for food-processing or pharmaceutical industries Easy maintenance (every 15,000 hours) *Depending upon size and ratio ØA ØB C ØD E j g * I k h l F mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in MRA 065 60j6 2.360 75 2.953 5.5 0.217 16j6 0.630 30 1.18 125 4.72 174-196.5 6.85-7.74 49.5 1.95 M5 70 2.75 10 0.39 3.5 0.14 MRA 080 80j6 3.150 100 3.937 6.5 0.256 20j6 0.787 40 1.57 142 5.59 220-290 8.66-11.42 59 2.32 M6 83 3.27 9 0.35 3 0.12 MRA 115 110j6 4.331 130 5.118 9 0.354 24j6 0.945 50 1.97 182 6.79 278-361 10.94-14.21 77.5 3.05 M8 115 4.53 10 0.39 3.5 0.14 MRA 140 130j6 5.118 165 6.496 11 0.433 40j6 1.575 80 3.15 224 8.82 380-465 14.96-18.31 100 3.94 M16 140 5.51 15 0.59 3.5 0.14 MRA 180 160j6 6.299 215 8.465 13 0.512 55j6 2.165 96 3.78 278 10.9 465-595 18.31-23.42 114 4.49 M20 192 7.56 20 0.79 5 0.19 * Depends upon No. of gear stages and motor dimensions. Performances MRA 065 MRA 080 MRA 115 MRA 140 MRA 180 speed - Rated/Max rpm 4000 / 6000 2000 / 4000 Rated Output Torque Nm 18 86 182 230 350 Accel Output Torque Nm 36 134 250 400 600 Gear ratio (see i = below) i Group A Group B Efficiency 1/2 stages % 96 / 91 96 / 91 Maximum Backlash arc-mins 15 or 5 15 or 5 or 3 Rated Life h 15 000 Operating Temperature Range C ; F -20 / +90 ; -4 / +194 - Consult us for lower or higher temperature use Sound level db (A) 66 68 70 S5 (intermittent duty) service Gearhead efficiency at full load At rated input speed and rated torque RATIO GROUP A: 1stage, i = 3-4 - 5-7 - 10 2 stages, i = 16-20 - 25-35 - 70-100 RATIO GROUP B: 1stage, i = 3-4 - 5-7 - 10 2 stages, i = 16-20 - 25-35 - 50-70 - 100 Please inquire for any ratio not shown.
MRA / bdr lines Heavy duty, planetary to bevel, right-angle, servo gearbox Up to 350 Nm rated with bevel Up to 9,000 Nm rated with planetary Backlash: from 15 to 2 minutes* Hollow shaft, double shaft or quadri-shaft versions available Efficiency: from 91% to 96%* Up to 13 standard ratios / custom ratios available High torque versions available upon request Easy 1 minute clamping onto any motor shaft (self-locating input flange) Standard case temperature range is 20 C to +90 C. Consult us for higher or lower temperature use IP 65 standard waterproofness. IP-67 & 1500 psi water jets available Washdown stainless steel version available Optional lubrication for food-processing or pharmaceutical industries Estimated life time 20,000 hours *depending upon model, ratio and size www.mijno.com 1
MRA 065 Ratio ( 3 4 5 7 10 16 20 25 35 50 70 100 input Rated / max speed rpm 4 000 / 6 000 (consult us if you require higher input speed) Rated power Kw 0.78 0.78 0.78 0.59 0.6 0.47 0.39 0.3 0.2 0.16 0.1 0.79 Rated torque Nm 1.88 1.88 1.88 1.4 1.5 1.1 0.95 0.76 0.57 0.38 0.28 0.19 Accel. torque Nm ( 2.34 2.34 2.35 2.35 1.88 2.3 1.79 1.46 1 0.76 0.57 0.28 Rated torque Nm 7.2 7.2 9 9.5 14 16 17 17 17.9 16.7 17.9 17 Accel. torque Nm ( 9 9 11 15.8 18 33 32 32.9 32.7 33 35.9 25.5 Inertia Kgm 2 x10-5 ( 4.3 3.5 3.27 3.04 2.93 3.2 3 3.16 3 2.9 2.9 2.9 Max. backlash arc-min. 15 or 5 Efficiency % ( 96 91 Weight Kg 3 4 Radial load N ( 750 Axial load N 300 30 70 55 70 3,5 Ø 5,5 Ø 75 Ø 60 j6 Ø16j6 92,5 37,5 M5 DIN 332 D 10 139 (1 Stage) / 162 (2 Stages) * 7 2 www.mijno.com
MRA 080 Ratio ( 3 4 5 7 10 16 20 25 35 40 50 70 100 input Rated / max speed rpm 3 500 / 6 000 (consult us if you require higher input speed) Rated power Kw 9.2 9.2 7.4 3.8 2.2 2.5 1.9 1.6 1.2 0.9 0.8 0.5 0.2 Rated torque Nm 22.1 22.1 17.7 9 5.2 5.9 4.7 3.7 2.7 2.4 1.9 1.1 0.5 Accel. torque Nm ( 29 29 19 11 6 9 7 6 4 3.5 2.8 1.6 0.9 Rated torque Nm 66 85 85 61 50 86 85 85 86 86 86 70 50 Accel. torque Nm ( 83 110 90 70 58 125 127 130 134 127 127 100 80 Inertia Kgm 2 x10-5 ( 13.6 10.86 9.81 9.13 8.73 10.24 10.18 9.48 8.91 8.64 8.63 8.62 8.61 Max. backlash arc-min. 10 or 5 Efficiency % ( 96 91 Weight Kg 8 10 Radial load N ( 1 600 Axial load N 650 40 3 77,4 63,5 6, 5 83 Ø 100 Ø 80 j6 Ø20j6 110 41,5 M6 DIN 332 D 7 188 (1 Stage) / 225 (2 Stages) * www.mijno.com 3
MRA 115 Ratio ( 3 4 5 7 10 16 20 25 35 40 50 70 100 input Rated / max speed rpm 3 000 / 6 000 (consult us if you require higher input speed) Rated power Kw 31.4 31.4 22 12.6 6.3 8.3 6.7 5 3.8 2.5 2.1 1.7 1.4 Rated torque Nm 62 47 38 27 15 12 10 8 5 4 4 2 2 Accel. torque Nm ( 86 65 52 29 20 17 13 11 7 7 6 4 3 Rated torque Nm 178 181 182 182 144 175 182 182 160 182 165 137 172 Accel. torque Nm ( 250 250 250 195 195 250 250 250 250 250 250 250 250 Inertia Kgm 2 x10-5 ( 55.3 44.4 40.4 36.8 35.1 42.3 42 38.9 36 35 34.7 34.5 34.5 Max. backlash arc-min. 10 or 5 Efficiency % ( 96 91 Weight Kg 13 25 Radial load N ( 2 400 Axial load N 1 000 50 115 3,5 9 Ø 130 Ø 110 j6 100 Ø 24 j6 10 30 51 * 65 57,5 2 x 4 Holes M6 158,5 M8 DIN 332 D 35 35 231 (1 Stage) / 272 (2 Stages) * Max. Ø32 4 www.mijno.com
MRA 140 Ratio ( 3 4 5 7 10 16 20 25 35 40 50 70 100 Rated / max speed rpm 2 000 / 4 000 (consult us if you require higher input speed) Rated power Kw 33 25 20 14 10 7 5 4 3 3 2 1 1 Rated torque Nm 80 60 48 34 24 16 13 10 7 6 5 3 2 Accel. torque Nm ( 138 104 83 44 31 27 22 17 12 11 8 6 4 Rated torque Nm 230 230 230 230 230 230 230 230 230 230 230 230 230 Accel. torque Nm ( 400 400 400 300 300 400 400 400 400 400 400 400 400 Inertia Kgm 2 x10-5 ( 173 128 112 100 94 112 104 102 95 91 91 91 91 Max. backlash arc-min. 10 or 5 Efficiency % ( 96 91 Weight Kg 20 30 Radial load N ( 6 000 Axial load N 3 000 80 3,5 122 91 11 OUTPUT VIEW 140 Ø 130 2 x 4 Holes M8 80 70 Ø 130 j6 125 M16 DIN 332 D 15 40 40 61 * Ø 40 j6 181 268 (1 Stage) / 311 (2 Stages) * MOTOR INPUT www.mijno.com 5
MRA 180 Ratio ( 3 4 5 7 10 16 20 25 35 40 50 70 100 input Rated / max speed rpm 2 000 / 4 000 (consult us if you require higher input speed) Rated power Kw 51 38 31 22 15 10 8 7 5 4 3 3 2 Rated torque Nm 121 91 73 52 36 24 19 15 11 9 8 6 4 Accel. torque Nm ( 139 104 83 59 41 27 22 18 13 11 9 7 5 Rated torque Nm 350 350 350 350 350 350 350 350 350 350 350 350 350 Accel. torque Nm ( 600 600 600 600 600 600 600 600 600 600 600 600 600 Inertia Kgm 2 x10-5 ( 422 262 207 162 138 226 223 182 148 132 132 132 131 Max. backlash arc-min. 10 or 5 Efficiency % ( 96 91 Weight Kg 60 90 Radial load N ( 9 000 Axial load N 5 000 96 5 148 100 130 13 192 Ø 215 50 Ø 160 j6 Ø55h6 M20 DIN 332 D 20 2 x 4 Holes M10 160 110 94 375 (1 Stage) / 406 (2 Stages) * 237 6 www.mijno.com
T.E.A. Transmissions Pty Ltd Your partner in quality engineering components since 1987 Thank you for viewing product information for TEA's 2011 range of engineering components. Now, please contact us for any further information, prices and delivery. Our contact details are: T.E.A. Transmissions Pty Ltd Tahiti Road Tiaro Qld. 4650 Australia Ph: +61 (0) 7 4129 2533 Fax: +61 (0) 7 4129 2437 Web: Email: www.tea.net.au sales@tea.net.au You are assured of prompt and efficient service at all times.