YOUR LOCAL CASE IH DEALER. More Power. Less Fuel. Learn more at:

YOUR LOCAL CASE IH DEALER More Power. Less Fuel. Learn more at: www.caseihroughriders.com

GRAIN PLATFORM KITS GRAIN PLATFORM KITS GRAIN HEADER COMPLETING KITS 2010 & 2020 HEADER ADAPTER KITS Application: 2100/2300 Series Combines CONVERSION KITS Includes: Weldment and mounting hardware for header frame only Part No. 87362990: 2010 or 2020 Flex Header AHHC WITH FIELD TRACKER SENSOR ADAPTER KITS Includes: Control module and harnesses with mounting hardware and I-sheets (2010 header sensors not included; order with header or sensor DIA kit) Part No. 87455332: AHHC and Field Tracker sensor adapter package for 2020 headers on 2100/2300 series combines. Includes control module and adapter harnesses. Sensors are included on 2020 headers as standard equipment. Part No. 87362990 Part No. 87455402: AHHC and Field Tracker sensor adapter package for 2010 headers on 2100/2300 series combines. Includes control module and adapter harnesses. Header must be equipped with production or service parts. 2 FALL PARTS 2011

GRAIN PLATFORM KITS ACCESSORIES / WOBBLE BOXES KNIFE DRIVE ASSEMBLY Application: 2000 Series Headers Part No.: 85000175 Price: $1402.84 For minimum downtime and new performance, choose the complete replacement. KNIFE REINFORCING KIT Includes: 50 Straps/nuts/bolts (enough straps and hardware for a 30' knife) Part No.: 321849A2 Price: $78.13 Reinforcing straps for improved strength and durability in high-load applications. www.bestcaseihparts.com WOBBLE BOXES For minimum downtime and new performance, choose the complete replacement. PART NO. DESCRIPTION APPLICATION PRICE 1330048C91 1316987C91 398290A2E Wobble Box; Does not include pulley Wobble Box; Includes pulley Wobble Box; Oil bath Part No. 1316987C91 WOBBLE BOX REPAIR KIT Application: 800/1000 Series* (prior to 1995) Includes: Bearings, shims and hardware Part No.: B95203 Price: $176.32 * For boxes Part No. 1330048C91 and Part No. 1316987C91 800 Series Headers $1547.02 1000 Series Headers (prior to 1995) 1000 Series Headers (1995 and later) Part No. 398290A2E $1463.83 $1546.90 TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS FALL PARTS 2011 3

GRAIN PLATFORM KITS KNIFE SECTIONS / CUTTER BAR REBUILD KITS CASE IH STA-SHARP & SUPER STA-SHARP SECTIONS Application: 1020 Headers Case IH Sta-Sharp and Super Sta-Sharp sections have a special design root serration to prevent excessive wear across the top. Complete selection of Sta-Sharp and Super Sta-Sharp sections available. High-carbon 1080 steel Induction hardened for extra-long wear Top-serrated sections have self-sharpening feature Available for 3" and 1-1/2" knife systems STA-SHARP SECTION KNIFE ASSEMBLIES HEADER SIZE 3" ONE PIECE* 3" SPLIT* 1-1/2" ONE PIECE 15' 451824A2 451830A2 1970502C5 16.5' N/A N/A 1970503C5 17.5' 451825A2 451831A2 1970504C6 20' 451832A2 451832A2 1970400C6 22.5' 451827A2 451833A2 1970442C5 25' 451828A3 451834A3 1970402C5 30' 451829A3 451835A3 1970404C5 * Knife with high shoulder Sta-Sharp sections SUPER STA-SHARP SECTION KNIFE ASSEMBLIES HEADER SIZE 3" ONE PIECE 3" SPLIT 1-1/2" ONE PIECE AUSTEMPERED SECTION 15' 87439540E 371613A2 398746A1 16.5' 87439541E 371617A2 398747A2 17.5' 87439542E 371618A2 398748A2 20' 87439543E 371619A2 398749A1 22.5' 87439544E 371620A2 398750A2 25' * 371621A3 398751A2 30' * 371622A3 398752A2 * Recommend the 3" Split Knife Part No. 371618A2 with Super Sta-Sharp Sections CUTTER BAR REBUILD KITS Includes: Guards, hold-down clips, wear plates and hardware (kits may not include knife depending on ordering options). Restore your grain header to like new performance with a complete cutter bar rebuild kit. Select the knife of your choice: headed or headless for 1-1/2" or 3" systems, split knives for 3" and the section type best suited to your needs. 1-1/2" CUTTER BAR KITS Application: 1000 Series Headers HEADER SIZE PA RT NO. WITH KNIFE SUPER PA RT NO. STA-S HARP SECTIONS W/O KNIFE 15' B94009E B92926E 16.5' N/A B92927E 17.5' B94011E B92928E 20' B94012E B92929E 22.5' B94013E B92930E 25' B94014E B92931E 30' B94015E B92932E ONE-PIECE KNIFE CUTTER BAR KITS Application: 820 Headers HEADER SIZE PA RT NO. WITH KNIFE SUPER STA-S HARP SECTIONS 15' B93985E 16.5' B93986E 17.5' B93987E 20' B93988E 22.5' B93989E 3 Inch System 4 FALL PARTS 2011

GRAIN PLATFORM KITS CUTTER BAR REBUILD KITS / ACCESSORIES CUTTER BAR REBUILD KITS (CONTINUED) 3" CUTTER BAR KITS FOR 1000 SERIES HEADERS Includes: Guards, hold-down clips, wear plates and hardware (Kits may not include knife depending on ordering options) HEADER SIZE ONE PIECE KNIFE SSS SECTIONS STD GUARDS SPLIT KNIFE SSS SECTIONS STD GUARDS HIGH ARCH HOLD-DOWN CLIP SERVICE KITS SPLIT KNIFE SSS SECTIONS DHT GUARDS Case IH 1-1/2" Knife Systems currently have 100% hold-down clips down the length of the cutter bar. The High Arch Clip Kit now provides for a secure method of holding down the knife over the drive end. Longer service life and improved cutting are the benefits. SPLIT KNIFE SS HIGH SHOULDER SECTIONS STD GUARDS FOR HEADERS WITH 3" KNIFE SYSTEM Includes: High-arch clip (1), mounting hardware and shims PART PART NO. NO. APPLICATION APPLICATION PRICE B95382 B95382 1010 Headers 1010 Headers $44.83 B95383 1020 Headers 1020 Headers $40.80 W/O KNIFE STD GUARDS W/O KNIFE DHT GUARDS 15' B92858E B95546 B95616 82797045 B92919E B95633 16.5' B92859E N/A N/A N/A B92920E B95634 17.5' B92860E B95548 B95617 82797046 B92921E B95635 20' B92861E B95549 B95618 82797047 B92922E B95636 22.5' B92862E B95550 B95619 82797048 B92923E B95637 25' * B95551 B95620 82797049 B92924E B95638 30' * B95552 B95621 82797050 B92925E B95639 * Recommend kit with split knife 3" CUTTER BAR KITS FOR 2000 SERIES HEADERS Includes: Guards, hold-down clips, wear plates and hardware (Kits may not include knife depending on ordering options) HEADER SIZE DRIVE TYPE OF HOLD DOWN CLIP MODEL KIT W/O KNIFE KIT W/KNIFE 20' Flex Double Adjustable 2020 87297974 87297979 25' Flex Double Adjustable 2020 87297975 87297980 30' Flex Double Adjustable 2020 87297976 87297981 35' Flex Double Adjustable 2020 73340145 73340144 20' Rigid Single Adjustable 2010 87297972 87297973 25' Rigid Double Adjustable 2010 87297977 87297982 30' Rigid Double Adjustable 2010 87297978 87297983 FOR HEADERS WITH 1-1/2" KNIFE SYSTEM Application: 1020 Headers Includes: High arch knife clips (2), mounting hardware and shims Part No.: B92983 Price: $62.28 TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS FALL PARTS 2011 5

CORN HEADER KITS CORN HEADER KITS POINT KITS LOW-PROFILE DIVIDER POINT KITS Application: 2400/3400 Series Headers corn conditions by lifting and gathering more down corn stalks than the previous design Point is designed to keep the tip of the point lower when running 2400/3400 Series Corn heads low to the ground, thereby getting under more corn stalks that lay close to the ground The tip of the point is more blunt, which is less likely to spear corn leaves and run cleaner PART P RT NO. NO. DESCRIPTION PRICE 87017978 Kit, Kit, 6r30", 70 70 cm cm Cast Cast Point $162.33 87017979 87017979 Kit, Kit, 6r36", 6r36", 38" 38" Cast Cast Point Point $201.26 87017980 87017980 Kit, 8r22" Cast Point Kit, 8r22" Cast Point $217.39 87017981 87017981 Kit, 8r30", 70 cm Cast Point Kit, 8r30", 70 cm Cast Point $201.97 87017982 Kit, 8r36", 38" Cast Point 87017982 Kit. 8r36", 38" Cast Point $262.39 87017983 Kit, 12r20", 22" Cast Point 87017983 Kit, 12r20", 22" Cast Point $307.79 87017984 Kit, 12r30" Cast Point 87017984 87017985* Kit, 12r30" Cast Point Kit, 30", 70 cm Cast Point $306.36 87017985* 87017986* Kit, 30", 70 cm Cast Point Kit, 36", 38" Cast Point $23.35 87017986* 87017987* Kit, Kit, 36", 20", 38" 22" Cast End Cast Point Point $30.86 87017987* * Includes one point Kit, and 20", unique 22" End mounting Cast Point hardware $23.68 * Includes one point and unique mounting hardware 6 Row Kit POINT KIT STEEL/POLY DIVIDER Includes: Point and hardware Protects divider High-strength cast steel PART P RT NO. DESCRIPTION APPLICATION AT N PRICE B94737 Inner Inner - All Row All Row Widths Widths 800-1000 800 1000 Series Series Headers Headers $21.79 B94738 Outer Outer - All Row All Row Widths Widths800-1000 800 1000 Series Series Headers Headers $21.12 6 FALL PARTS 2011

CORN HEADER KITS STALK ROLL KITS CHAIN/SPROCKET KIT 1 ROW Includes: Gatherer chain drive sprockets (2), gatherer chain idler sprockets (2), gatherer chains (2) and hardware PART NO. NO. DESCRIPTION APPLICATION APPLICATION PRICE B95215 Regular-Duty 800 Series 800* Series Headers* Headers $204.29 B95214 Regular-Duty 900/1000-900/1000 Series Series Headers Headers$199.67 B96154A Regular-Duty Regular-Duty 2200/2400/3200/3400 2200/2400/3200/3400 Series Series Headers Headers $239.31 B96155A B96155A Extenda-Wear 2200/2400/3200/3400 Extenda-Wear 2200/2400/3200/3400 Series Series Headers Headers $256.18 73340676 Regular-Duty 2600 2600 Series Series Headers Headers $758.11 * *Requires row row unit unit re-work Now Available! Chain & Sprocket Kit Part No. 73340676 Application: 2600 Series Headers Includes: Chains, sprockets, covers & all hardware NEW! COMPLETE ROLL & CHAIN ASSEMBLY 1 ROW Includes: LH and RH roll assembly, spiral augers, lower support shims, gatherer chain drive sprockets (2), gatherer chain idler sprockets (2), drive sprocket attaching hardware and gatherer chains (2) PART PART NO. NO. DESCRIPTION DESCRIPTION APPLICATION APPLICATION PRICE B92766A B92766A Regular-Duty Regular-Duty 800*-1000 800* 1000 Series Series Headers Headers $980.33 B96434 B96434 Extenda-Wear 800* 1000 Series Headers Exterior-Wear 800*-1000 Series Headers $1036.55 B95584A B95584A Chrome Pins 2200/2400 Series Headers Chrome Pins 2200/2400 Series Headers $848.41 73340129 Regular-Duty 3200/3400 Series Headers 73340129 Regular-Duty 3200/3400 Series Headers $985.37 73340130 Extenda-Wear 3200/3400 Series Headers 73340130 Extenda-Wear 3200/3400 Series Headers $1049.53 *Requires row unit re-work * Requires row unit re-work Part No. B95214 Part No. B95584A Part No. B92766A Part No. B95584A TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS FALL PARTS 2011 7

CORN HEADER KITS STALK ROLL REPAIR KITS STALK ROLL REPAIR KITS Includes: Components to rebuild one row and all hardware All components are original equipment quality Corn head knives have superior tungsten carbide coating for longer wear Corn head knife hardware is Grade 8 STANDARD KITS 1 ROW PART P RT NO. NO. DESCRIPTION APPLICATION APPLICATIOAT N PRICE B94594 8 Knives 8 Knives 800 Series 800 Series Headers Headers $139.66 B94532 8 Knives 8 Knives 900/1000 900/1000 Series Series Headers Headers $139.66 B95583A 4 Knives 4 Knives 2200/2400 2200/2400 Series Series Headers Headers $217.13 73340673 1-Row 1-Row 2600 Series 2600 Series Chopping Chopping Headers Headers $317.42 73340131 73340131 8 Knives 8 Knives 3200/3400 3200/3400 Series Series Headers Headers $163.20 Part No. B94532 Now Available! Knife Repair Kit for 1 Row Part No. 73340673 Application: 2600 Series Chopping Headers Includes: 8 Knives & hardware NEW! Part No. B95583A DELUXE KITS 1 ROW Includes: Corn head knives (to replace 1 full row), gatherer chain drive sprockets (2), gatherer chain idler sprockets (2), gatherer chains (2) and hardware Part No. B94533 PART P RT NO. NO. DESCRIPTION APPLICATION APPLICATIOAT N PRICE B94541 Regular-Duty r Chain Chain 800 Series 800 Series Headers Headers $349.60 B94533 Regular-Duty r Chain Chain 900/1000 900/1000 Series Series Headers Headers $349.60 B96153A Regular-Duty Regular-Duty Chain Chain 2200/2400 2200/2400 Series Series Headers Headers $465.66 B95585A B95585A Extenda-Wear Extenda-Wear Chain Chain2200/2400 2200/2400 Series Series Headers Headers $482.95 73340134 73340134 Regular-Duty Regular-Duty Chain Chain 3200/3400 3200/3400 Series Series Headers Headers $350.32 73340135 73340135 Extenda-Wear Chain 3200/3400 Series Headers Extenda-Wear Chain 3200/3400 Series Headers $404.39 Part No. B95585A STALK ROLL STRIPPER PLATE KIT Application: 900/1000 Series Headers Includes: Stripper plates (LH & RH) and attaching hardware Part No.: B95449 Price: $72.66 Stripper plates made from high-strength material for superior performance. Part No. B95449 8 FALL PARTS 2011

CORN HEADER KITS CORN HEAD SERVICE KITS All Packs Include: Hardware DRIVE SPROCKET KITS PART P RT NO. NO. APPLICATION AT N PRICE B94733 800 800 Series Series Headers $33.88 B94734 900 1000 Series Series Headers $36.47 B95574A 2200/2400/3200/3400 Series Series Headers Headers $49.45 IDLER SPROCKET KITS/PLATED SPROCKETS PART P RT NO. NO. DESCRIPTION DESCRIPTION APPLICATION APPLICATIOAT N PRICE B94739 Idler Idler Sprocket Sprocket Kit Kit 800 1000 800 1000 Series Series Headers Headers $19.34 B95573 Idler Idler Sprocket Sprocket Kit Kit 2200/2400/3200/3400 Series Series Headers Headers $18.00 73340138 Plated Plated Sprockets 2200/2400/3200/3400 Series Series Headers Headers $19.37 SKID PAD KITS PART P RT NO. NO. DESCRIPTION DESCRIPTION APPLICATION APPLICATIOAT N PRICE B94736 Inner Inner 30" 30" Rows Rows 800 1000 800 1000 Series Headers Series Headers $19.78 B94845 Outer Outer All Row All Row Widths Widths 800 1000 800 1000 Series Headers Series Headers $19.39 B96355 Inner Inner 36" 36" Rows Rows 800 1000 800 1000 Series Headers Series Headers $20.57 REPLACEABLE WEAR PLATE KITS PART P RT NO. NO. APPLICATION AT N PRICE 87297604 2200/2400 Series Series Headers Headers $24.44 73340139 3200/3400 Series Series Headers $25.13 LOW PROFILE POINT KITS PART P RT NO. NO. DESCRIPTION APPLICATION AT N 87017985 30" 30" Rows Rows 2200/2400/3200/3400 Series Series Headers Headers 87017986 36", 36", 38" 38" Rows Rows 2200/2400/3200/3400 Series Series Headers Headers 87017987 20", 20", 22 22" Outer Outer Points Points 2200/2400/3200/3400 Series Series Headers Headers EAR SAVER KITS Reduce ear loss High-strength rubber PART P RT NO. NO. DESCRIPTION APPLICATION AT N PRICE B94550A Steel Steel Hoods Hoods 800 1000 Series Headers $14.79 B94838A Poly Poly Hoods Hoods 800 1000 Series Headers $14.79 B95582 Poly Poly Hoods Hoods 2200/2400/3200/3400 Series Headers $18.47 Idler Sprocket Kit Wear Plate Kit Ear Saver Kit Drive Sprocket Kit Skid Pad Kit Point Kits TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS FALL PARTS 2011 9

CORN HEADER KITS STALK STOMPERS STALK STOMPER MODELS FOR CASE IH COMBINES CIH 2200/2400/ CIH 2600 3200/3400 IH 800 IH 900/IH 1000 Stalk Stompers Smash stalks to accelerate decomposition Manage your residue by breaking down standing stalks Save your tires or tracks REPLACEMENT PARTS Part No. 73340748 IH 800 Series Bracket Part No. 73340751 CIH 2600 Series Connector Arm Bracket Part No. 73340756 Poly Shoe Replacement Cover Black Part No. 73340749 IH 900/1000 Series Bracket Part No. 73340752 IH Spacer Block for 8-Row Heads pr. Part No. 73340758 Stalk Stomper Bolt Kit Part No. 73340750 CIH 2200/2400/ 3200/3400 Part No. 73340755 Metal Stomper Shoe w/black Poly Cover STALK STOMPERS REPLACEMENT PARTS PA RT NO. DESCRIPTION 73340635 Stalk Stompers 800 Series Headers 73340636 Stalk Stompers 900/1000 Series Headers 73340637 Stalk Stompers 900/1000 Series Headers (8-Row) 73340627 Stalk Stompers 2200/2400/3200/3400 Series Headers 73340628 Stalk Stompers 2600 Series Headers 73340759 Stalk Stompers IH 820 Complete 73340760 Stalk Stompers Case IH 1020 Grain Headers PA RT NO. DESCRIPTION 73340748 800 Series Bracket 73340749 900/1000 Bracket 73340750 2200/2400/3200/3400 Bracket 73340751 2600 Bracket 73340752 Spacer Block (8-Row) 73340755 Shoe with Cover 73340756 Poly Replacement Cover Black 73340757 Stalk Stomper Spring 73340758 Stalk Stomper Bolt Kit 10 FALL PARTS 2011

MID-RANGE COMBINES MID-RANGE COMBINES 1400 / 1600 / 2100 /2300 / 2500 SERIES & NEW 88 SERIES FIELD TRACKER AUTO CENTER KIT Part No.: 435906A1 Price: $69.53 KITS Provides operator convenience Permits automatic leveling of the header as it is raised in the manual mode Allows the operator using headers not equipped with field tracker (corn heads, rigid headers) to level the header automatically when the header is raised THIRD CYLINDER LIFT KIT PART NO. PART NO. DESCRIPTION DESCRIPTION PRICE 137856A2 137856A2 60" 60" Feeder Feeder $1068.99 137857A2 Feeder Feeder with with Rock Rock Trap Trap $1219.64 SLIDE SUPPORT ANGLE KIT Application: 1600/2100/2300/2500 Series Combines Includes: Four support angles (does not include instructions) Part No.: 416756A1 Price: $384.21 Use to repair Field Trackers frame in instances where the slide support have failed and damaged the angle Kit offers improved durability FALL PARTS 2011 11

MID-RANGE COMBINES BOLTED FEEDER CHAINS Heavy-duty #557 chain with chrome pins, now available with heavy-duty bolt-on slats. This long lasting feeder chain comes with slats that are replaceable. Case IH serrated slats are the same heavy-duty material as smooth slats. BOLTED SLATS (WITH HARDWARE) BOLTED L DESCRIPTION APPLICATIOAT N PART P RT NO. NO. DESCRIPTION APPLICATION PRICE 118268A1 Smooth Smooth (2-Strand) 20/40/60 20/40/60 Size Machines Size Machines $33.80 118269A1 Smooth Smooth (2-Strand) (2-Strand) 80 Size 80 Machines Size Machines $52.01 118270A1 Serrated Serrated (2-Strand) (2-Strand) 20/40/60 20/40/60 Size Machines Size Machines $58.54 118271A1 118271A1 Serrated Serrated (2-Strand) (2-Strand) 80 Size 80 Machines Size Machines $69.09 196359A2 196359A2 Serrated (3-Strand) Serrated (3-Strand) RH RH $39.07 196360A3 196360A3 Serrated (3-Strand) Serrated (3-Strand) LH LH $39.07 196357A1 Smooth (3-Strand) RH 196357A1 Smooth (3-Strand) RH 196358A1 Smooth (3-Strand) LH $29.15 196358A1 Smooth (3-Strand) LH $29.15 REPAIR LINKS PART P RT NO. NO. DESCRIPTION DESCRIPTION PRICE B96022*, 305191A1** Center Center Chain Chain 3-Strand 3-Strand Chain Chain$40.95 1989692C1**, B96023* Slat Slat Outside Outside Chain Chain $12.91 * Direct *Dir e Ship ****Depot Part No. No. Part No. B96022 Part No. B96023 2-STRAND BOLTED FEEDER CHAIN BOLTED L DESCRIPTION NUMBER NUMBER APPLICATIOAT N PART P RT NO. NO. DESCRIPTION OF SLATS OF SLA AT APPLICATION TS PRICE 117868A1 47" 47" Serrated Serrated 8 8 1420/1620 1420/1620 $1047.21 117869A1 47" Smooth 10 1620/1640/1644/ 1620/1640/1644/ $526.37 117869A1 47" Smooth 10 1660/1666/2144/ 1660/1666/2144/ 2166/2344/2366 2166/2344/2366 117864A1 47" Serrated 10 1640/1644/1660/ 1640/1644/1660/ $671.10 117864A1 47" Serrated 10 1666/2144/2166/ 1666/2144/2166/ 2344/2366 2344/2366 117865A1 54" Serrated 9 1640/1644/1660/ 1640/1644/1660/ $682.24 117865A1 54" Serrated 9 1666/2144/2166/ 1666/2144/2166/ 2344/2366 2344/2366 117871A1 54" Smooth 12 1640/1644/1660/ 1640/1644/1660, $564.69 117871A1 54" Smooth 12 1666/2166/2366 1666/2166/2366 117866A1 54" Serrated 9 1480/1680/1688 $732.39 117866A1 54" Serrated 9 1480/1680/1688 117872A1 117872A1 54" 54" Smooth Smooth 12 12 1480/1680/1688 1480/1680/1688 $651.99 117867A1 60" 60" Serrated Serrated 10 10 1480/1680/1688 1480/1680/1688 $918.32 136438A1 60" Serrated 10 2144/2166/ 2144/2166/ $876.24 136438A1 60" Serrated 10 2344/2366 2344/ 2366 136439A1 60" Smooth 12 2144/2166/ 2144/2166/ $672.09 136439A1 60" Smooth 12 2344/2366 2344/ 2366 136440A1 60" 60" Smooth Smooth 12 12 2188 2188 $692.50 3-STRAND BOLTED FEEDER CHAIN Application: 1680/1682/1688/2188/2388 Combines BOLTED L PART P RT NO. NO. DESCRIPTION NUMBER OF NUMBER SLATS OF SLA AT TSPRICE 84207190 195664A1 54" 54" Smooth Smooth11 LH, 11 11 RH LH, 11 RH $1017.95 195666A2 54" 54" Serrated Serrated11 LH, 11RH LH, 11 RH $1142.22 195668A1 60" 60" Smooth Smooth12 LH, 12 12 RH LH, 12 RH $1287.99 84207192 195670A2 60" 60" Serrated Serrated 12 LH, 12 12 RH LH, 12 RH $966.81 3-STRAND CHAIN KITS Application: 80 size machines 3-Strand Chain Kit PART P RT NO. NO. DESCRIPTION PRICE B93528 54" Smooth with Stone Retarder Drum $2331.16 B93532 54" 54" Smooth without Drum $1627.63 B93533 54" 54" Serrated without Drum Drum $1754.50 B93530 B93530 60" 60" Smooth Smooth with with Stone Stone Retarder Retarder Drum Drum $2573.35 B93534 B93534 60" Smooth without Drum 60" Smooth without Drum $1894.33 B93531 B93531 60" Serrated with Stone Retarder Drum 60" Serrated with Stone Retarder Drum $2644.00 B93535 60" Serrated without Drum B93535 60" Serrated without Drum $1941.90 If the drum is worn, replacement drum available as a regular parts item. If the drum is worn, replacement drum available as a regular parts item. 12 FALL PARTS 2011

MID-RANGE COMBINES TRANSITION CONES & VANE KITS FIFTY-TWO (52) HOLE CONFIGURATION CONES Both the standard-steel and stainless-steel transport vanes are The standard-steel vanes are thicker increased from 1/8" to 3/16" a full 50% more material The new cone has 57% more holes/hardware for improved vane The standard-steel vanes have 3/8 holes to accommodate stronger 3/8 T-bolts STANDARD CONES With standard-steel vanes. PART P RT NO. NO. DESCRIPTION APPLICATIOAT N PRICE B92770 40/60 40/60 Size Size Machines Machines$1611.77 B93199* 40/60 40/60 Size Size Machines Machines$1729.99 84265390 84265390 80 80 Size Size Machines Machines $1750.17 * Cones with wear resistant hardware. * Cones with wear resistant hardware. CONE VANE KITS FOR 52 HOLE CONES Application: 80 size machines Includes: Vanes, T-bolts (52) and nuts (52) Available in standard-steel and stainless-steel. Both are 3/16" thick with the standard-steel vanes increasing from 1/8" to 3/16". contour of the cone The standard-steel vanes are thicker increased from 1/8" to 3/16" a full 50% more material The standard-steel vanes have 3/8" holes to accommodate 3/8" T-bolts same as previous stainless-steel vanes 10 mm heavy-duty hardware PART P RT NO. NO. DESCRIPTION PRICE 437319A2 Standard-Steel Vane Vane Kit Kit$257.56 428875A2 Standard-Steel Stainless-Steel Vane Vane Kit Kit$556.57 HEAVY-DUTY CONES With stainless-steel vanes. PART NO. DESCRIPTION PRICE B94842 40/60 Size Machines $2240.33 428878A1 80 Size Machines $2054.36 Fifty-two (52) hole cone w/vanes CONE VANE KITS FOR 33 HOLE CONES PART NO. PA RT NO. DESCRIPTION DESCRIPTION APPLICATION APPLICATIOAT N PRICE B93193 B93193 Vane Vane Kit Kit 40/60 40/60 Size Machines Size Machines $226.77 87328881 Vane Vane Kit Kit 3/16 3/16 40/60 Size Machines $195.46 87328881 HD Vanes with T-bolts 40/60 Size Machines HD Vanes with T-bolts B93195* B93195* Vane Vane Kit Kit 40/60 40/60 Size Machines Size Machines $290.50 321933A1 Extenda-Wear Extenda-Wear Vane Vane Kit Kit 40/60 40/60 Size Machines Size Machines $497.66 B93194 Vane Vane Kit Kit 80 Size 80 Machines Size Machines$227.92 B93196* Vane Vane Kit Kit 80 Size 80 Machines Size Machines$343.12 348502A1 Vane Vane Kit Kit 80 Size 80 Machines Size Machines$544.22 B93447 Bolt Bolt Kit Kit (20 (20 bolts/20 bolts/20 nuts) Multiple Multiple $68.91 nuts) * Vane kit with wear resistant hardware. * Vane kit with wear resistant hardware. Thirty-three (33) hole cone w/vanes EXTENDA-WEAR CONES Heat-treated cone with stainless-steel vanes. PART NO. DESCRIPTION PRICE 428877A1 80 Size Machines $4422.99 TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS FALL PARTS 2011 13

MID-RANGE COMBINES AFX ROTOR MODEL YEAR 2007 AND PRIOR Over 30 years of industry leadership. Reduces peak rotor HP requirements in tough conditions. Results in quieter operation. Depending on crops and conditions, the AFX rotor can improve New CADI Longer Wearing Straight Separator Bar Rasp Bars (Std. Duty or Chrome Alloy) New CADI Longer Wearing Plated Kicker The AFX rotor creates a strong vacuum, moving dust away from the feeder house and cab area for excellent header visibility. Separation Area Threshing Area Graduated Pitch Impeller Inlet Flighting MODELS AND COMPONENT CONFIGURATIONS FOR 1480/1680/1688/2188/2388 COMBINES PA RT NO. 87299143 87636594 87299955 87636602 DESCRIPTION For grain. Includes (non-adjustable) variable pitch inlet front section with non-spike rasp bars and 4 separator bars in the grate area. Can be used in corn, soybeans and edible beans. Metric Hardware. For corn. Includes (non-adjustable) variable pitch inlet front section with non-spike rasp bars and 8 straight separator bars in separator bars for installation in concave area. Metric Hardware. For rice. Includes (non-adjustable) variable pitch inlet front section with chrome-alloy spiked rasp bars over entire rotor for extended wear. Metric Hardware. For grain, corn, soybeans, edible beans and extended wear. Includes (non-adjustable) variable pitch inlet front section with chrome alloy rasp bars and 4 separator bars over the grate area. Recommended for use with other extended wear combine features. Metric Hardware. RASP BAR KITS FOR ROTORS LISTED ABOVE (ENGLISH HARDWARE) Rasp Bar Kit (less kickers) B96643 B96644 B96641 B96642 Rasp Bar Kit (with kickers) B96647 B96648 B96645 B96646 RASP BAR KITS FOR ROTORS LISTED ABOVE (METRIC HARDWARE) Rasp Bar Kit (less kickers) 87298142 87298143 87298144 87298145 Rasp Bar Kit (with kickers) 87298146 87298147 87298148 87298149 14 FALL PARTS 2011

MID-RANGE COMBINES ROTOR KITS ANTI-WIND EXTENSION KIT (FOR 80 SIZE) Application: 2188/2388 Combines and 2500/88 Series Combines Includes: Anti-Wind extension bolts, washers and instructions Part No.: 87377347 Price: $94.57 For S/N 273337 and above equipped with AFX rotors. Combines built after the S/N have two drilled and tapped holes so the Anti- Wind can be attached directly to the housing without any rework. FEATURES Reduced bearing housing wrapping longer bearing life by moving material away from the front rotor bearing Improved crop material AFX ROTOR RASP BAR RETAINING BOLT WRENCH PA RT NO. DESCRIPTION 380000915 English 380002378 Metric DELUXE ANTI-WIND EXTENSION KIT (FOR 80 SIZE) Application: 2188/2388 Combines and 2500/88 Series Combines Includes: Anti-Wind extension, bolts, washers housing with mounting holes, bearing and instructions Part No.: 87377349 Price: $336.62 For S/N 273336 and below equipped with AFX rotors. FEATURES Same features as listed for anti-wind extension kit, plus this deluxe kit includes the bearing housing and bearing assembly which is drilled and tapped for easy installation of the anti-wind extension Save time with this kit on S/N 273336 and below IMPELLER INLET FIGHTING KIT Includes: PART P RT NO. NO. DESCRIPTION APPLICATION APPLICATIOAT N PRICE 87308133 434525A3E 87519251 24" 24" 30" 30" 30" 30" 40/60 Size 40/60 Machines Size Machines $647.22 80 Size 80 Machines Size Machines$457.72 80 Size 80 Machines Size Machines $530.52 (Hard-Faced) (Hard-Faced) TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS FALL PARTS 2011 15

MID-RANGE COMBINES CONCAVE KITS TWO-PIECE CONCAVES It s true Case IH concaves are not line-bored as advocated by IH offers a three-radius design that was developed for Axial-Flow combines to provide a balanced system for best performance in terms of feeding capacity and crop threshing. Neither of the three radius points are on the rotor center line! PART P RT NO. NO. DESCRIPTION APPLICATION APPLICATIOAT N PRICE B93571 Small Small wire wire 40/60 Size 40/60 Machines Size Machines$1184.44 B93572 B93572 Large Large Wirewire 40/60 Size 40/60 Machines Size Machines$1342.90 B93573 B93573 Small Small wire wire 80 Size Machines 80 Size Machines $1802.07 B93574 B93574 Large wire 80 Size Machines Large Wire 80 Size Machines $1581.49 ONE-PIECE CONCAVE KITS Includes: Concave #1, #2 and #3 Standard equipment on all 2002 and later model combines The one piece design eliminates the extension, improving durability Saves installation time stronger and more durable than the two-piece concaves Extenda-Wear concaves have heat-treated cross bars PART P RT NO. NO. DESCRIPTION APPLICATION APPLICATIOAT N PRICE B96125 Large Wire 80 Size 80 Size (1680 (1680 and later) and later) $1416.97 B96127 Small Wire/ 80 Size 80 Size (1680 and later) $1572.83 Extenda-Wear W (1680 and later) B96126 B96126 Large Wire/ 80 Size 80 Size (1680 and later) $1647.46 Extenda-Wear W (1680 and later) B96128 Large Wire 40/60 40/60 Size Size (1600 and $1202.72 later) Small Wire/ (1600 and later) B96130 40/60 Size (1600 and later) B96130 Small Extenda-Wear Wire/ 40/60 Size $1421.14 Extenda-Wear (1600 and later) Large Wire/ B96129 40/60 Size (1600 and later) B96129 Large Extenda-Wear Wire/ 40/60 Size $1312.94 Extenda-Wear (1600 and later) ROUND BAR CONCAVE KIT Application: 80 Size Machines Includes: One Part No. 87456655 (Position 1) and two Part No. 412395A1 (Position 2 and 3) Part No.: 87298938 Price: $1989.49 It s All About Capacity The round bars function to prevent silks or husks from hair pinning on the bars/wires in high moisture corn This allows for higher capacity and throughput in tough or high yield conditions Concaves also have large wires that run 90 degrees to the round bars for soybean harvesting Part No. B96127 16 FALL PARTS 2011

MID-RANGE COMBINES SIEVE KITS ORIGINAL EQUIPMENT SIEVE KITS Application: 1680 and later with long sieves (80 Size Machines) Includes: and grain loss sensor with brackets Complete and ready to install. PA RT NO. 87710708E 87710706E 87710709E 87710707E 87712275E 87712276E SHIP MOST POPULAR SIEVES DIRECT PA RT NO. 1330688C3 1330687C4 1330689C3 1319093C6 B91516 1346915C3 1347015C3 STANDARD LENGTHS Application: 40/60 Size Machines (Older Models) PA RT NO. 1330684C2 1330686C2 1330685C2 1319092C4 B91515 1346914C2 1347016C2 DESCRIPTION Chaffer 1-1/8" Grain Chaffer 1-5/8" Corn Chaffer 1-5/8" Closz Slat Chaffer Peterson Shoe 1-1/8" Grain Shoe 1-5/8" Corn SHIP DIRECT STANDARD LENGTHS Application: 80 Size Machines (Older Models) DESCRIPTION Chaffer Closz Slat 1-5/8" Chaffer 1-1/8" Grain Chaffer 1-5/8" Corn Chaffer 1-5/8" Corn Chaffer Rigid Airfoil Shoe 1-1/8" Grain Shoe 1-5/8" Corn DEPOT DESCRIPTION Chaffer 1-1/8" Grain Chaffer 1-5/8" Corn Chaffer Closz Slat 1-5/8" Chaffer Peterson Chaffer Rigid Airfoil Shoe 1-1/8" Grain Shoe 1-5/8" Corn EXTENDED LENGTHS Application: Newer Models PA RT NO. DESCRIPTION APPLICATIOAT N 1957316C7 Chaffer 1-1/8" Grain 44/66 Combines 1957315C8 Chaffer 1-5/8" Corn 44/66 Combines 1957314C8 Chaffer 1-5/8" Closz Slat 44/66 Combines 1970516C8 Chaffer Peterson 44/66 Combines 1325323C6 Shoe 1-1/8" Grain 44/66 Combines 1994961C5 Shoe 1-5/8" Corn 44/66 Combines 87710708 Chaffer 1-1/8" Grain 80/88 Series Combines 87710706 Chaffer 1-5/8" Corn 80/88 Series Combines 87710709 Chaffer 1-5/8" Closz Slat 80/88 Series Combines 87710707 Chaffer Peterson 80/88 Series Combines B91517 Chaffer Rigid Airfoil 88 Series Combines 87712275 Shoe 1-1/8" Grain 80/88 Series Combines 87712276 Shoe 1-5/8" Corn 80/88 Series Combines TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS FALL PARTS 2011 17

MID-RANGE COMBINES CURVED BAT KITS CURVED BAT KITS Includes: 6 bats (3 LH and 3 RH) and mounting hardware Spreads straw and chaff over a wider area up to 30' Spreading mat is more uniform to help in tillage work, fertilizer utilization, and seed germination PART P RT NO. NO. APPLICATION AT N PRICE 413004A1 40/60 Size Size Machines $199.24 400505A1 80 80 Size Machines $227.78 CURVED BAT SINGLE KITS Combine with External Straw Chopper Kit and Two Speed Straw Spreader Driven Pulley Kit for maximum spreading results. PART P RT NO. NO. DESCRIPTION APPLICATION AT N PRICE B95864 LH 40/60 40/60 Size Size $30.28 B95864 LH Machines Machines B95865 RH 40/60 40/60 Size Size $30.28 B95865 RH Machines Machines B95866 LH 80 80 Size Size $36.47 B95866 LH Machines Machines B95867 RH 80 80 Size Size $36.47 B95867 RH Machines Machines Part No. B95866 CURVED BAT ASSEMBLIES PART P RT NO. NO. DESCRIPTION APPLICATION APPLICATIOAT N PRICE B95860 Chaff f Spreader LH 1644-2366 1644-2366 Combines Combines $382.04 B95861 Chaff f Spreader LH 1644-2366 1644-2366 Combines Combines $382.04 B95862 Chaff f Spreader LH 1688-2588 1688-2588 Combines Combines $444.03 B95863 Chaff f Sp Spreader LH 1688-2588 1688-2588 Combines Combines $444.03 WE VE GOT WHAT YO U NEED SEARCH ONLINE PA RTS CAT TA ALOG FILTERS BATTERIES SHOP PRODUCTS MANUALS AND MORE AT WWW.BESTCASEIHPARTS.COM

FLAGSHIP COMBINES FLAGSHIP COMBINES 7010 / 8010 / 7120 / 8120 / 9120 SERIES TRACK KITS TRACK KITS Application: 7010-9120 Axial-Flow Combines PRODUCT FEATURES & COMPARISONS TO COMPETITION Up to 20 mph travel speeds lower speed reductions on other between PGA and transmission 32" tracks) Center pivot provides equal ground pressure (front to rear) not offset like others, with more weight on rear than front Hydraulic tensioning of tracks not spring or hydraulic over spring like competition PA RT NO. DESCRIPTION APPLICATIOAT N 87477345 Installation Kit 84129453 84130512* Fan Shield and Platform Track Kit Rubber Tracks, Yokes, and Undercarriage NOTE: 30" platform extension not included with machine. Must be ordered e separately y. 7010/7120/8010/8120/ 9120 Combines 7010/8010 Combines 7010/7120/8010/8120/ 9120 Combines LESS COMPACTION, GREATER FLOTATION, GREATER TRACTION The ground pressure of the 36" track is 12.2 psi which is about 50% and year. FALL PARTS 2011 19

FLAGSHIP COMBINES FEEDER CHAINS FEEDER CHAIN SELECTION U SHAPE SLAT 2008 & EARLIER Now Available! NEW! PART NO. DESCRIPTION APPLICATION PRICE 87283358 Chain w/serrated Slats Non-Rock Trap Models $974.36 87283359 Chain w/smooth Slats Non-Rock Trap Models $831.79 87283356 Chain w/serrated Slats Rock Trap Models $819.77 87283357 Chain w/smooth Slats Rock Trap Models $1095.71 87283349 Connector Link $5.80 87283350 Offset Link $4.37 87283351 Roller Link $2.73 U SHAPE SLAT 2009 & LATER PART NO. DESCRIPTION APPLICATION PRICE 84179639 Chain Assembly w/ Serrated Slats 84179642 Chain Assembly w/ Serrated Slats Rock Trap Models $1688.67 Non-Rock Trap Models $2615.51 87646014 Chain Inner Rock Trap Models $379.89 87646003 Chain Inner Non-Rock Trap Models $397.98 87625522 Chain Outer Rock Trap Models $367.83 87625524 Chain Outer Non-Rock Trap Models $370.85 84179662 Serrated Slat All Models $19.56 New Style Feeder Chain Connector Links Part No. 84257096 Price: $25.47 FEEDER CHAIN LINK KIT 2009 & LATER PART NO. NO. DESCRIPTION PRICE 73340430 Offset Offset Link Link Kit Kit Includes 2 Links 2 Links $59.10 73340431 Connector Link Link Kit Kit Includes Includes 2 Links 2 Links $42.10 FEEDER CHAIN WITH FULL WIDTH SLATS Application: Model year 2008 & earlier For tougher harvest conditions Can be used with new Spring Tension Front Drum Kit (Part No. 84182198) PART NO. DESCRIPTION APPLICATION APPLICATION PRICE 87625520 Full Width Combines with 87625520 Serrated Full Width Combines with $1778.18 "Z" Z Shaped Slats Rock Trap Rock Trap 87625521 Serrated Full Full Width Combines Combines without without $2278.00 87625521 "Z" Z Shaped Slats Rock Trap Rock Trap FEEDER CHAIN SLAT KIT 2008 & EARLIER HEAVY-DUTY #557 CHAIN W/CHROME PIN Part No.: 87283358 Heavy-duty rolled formed slats for maximum strength Replaceable (U-shape) bolt-on slats Choice of smooth or serrated slats Grade 8 Hardware PART NO. NO. DESCRIPTION PRICE 87297730 Serrated Slat Slat Kit Kit (shown) (shown) "U" U Shape Shape $26.99 87297731 Smooth Smooth Slat Slat Kit Kit "U" U Shape Shape $30.99 2009 & LATER PART NO. NO. DESCRIPTION PRICE 73340434 Serrated Slat Slat Kit Kit "U" U Shape $34.30 20 FALL PARTS 2011

FLAGSHIP COMBINES STANDARD DIAMETER TUBE ROTORS RASP BAR KITS Includes: All rasp bars are weight sorted to improve rotor performance. RASP BAR BOLT KIT Includes: 10 bolts Part No.: 87297739 Cost: $28.30 Part No. 87297737 www.bestcaseihparts.com RASP BAR SERVICE PACK (4-BAR) Application: 4-bar service kits for 7010-9120 rotors Includes: Rasp bars, Grade 8 english 10.9 metric threads bolts and nuts Weight sorted for improved rotor performance Kits for all type specialty rasp bars standard-duty bars and chrome alloy bars in both spiked and non-spiked Performance, strength, wear-resistance, and durability packaged for customer convenience PART P RT NO. NO. DESCRIPTION PRICE 87298166 Standard-Duty Rasp Rasp Bar Bar $69.06 87298167 Chrome Chrome Alloy Alloy Bars Bar $99.77 87298168 87298168 Chrome Chrome Alloy Alloy Spiked Spiked Bars Bar $111.72 STRAIGHT BAR KITS Includes: 2 straight bars and hardware PART P RT NO. NO. DESCRIPTION APPLICATION APPLICATIOAT N PRICE 87297737 Rasp Bar Kit Chrome Grain, Corn, Soybeans, 87297737 Rasp Bar Kit Chrome Grain, Corn, Soybeans, Edible Beans $1753.05 Alloy Alloy Rasp Rasp Bars Bars 87297738 Rasp Bar Kit Chrome 87297738 Rasp Bar Kit Chrome Rice Rice $1977.94 Alloy Alloy Spiked Spiked Rasp Rasp Bars Bars 87297740 Rasp Rasp Bar Bar Kit Kit Strandard Standard- Grain, Grain, Corn, Soybeans, Edible Corn, Soybeans, $1210.99 87297740 Duty Duty Rasp Rasp Bars Bars Beans PART P RT NO. NO. DESCRIPTION DESCRIPTION APPLICATION AT N PRICE 73340426 Regular Regular Duty Duty Grain, Grain, Corn, Corn, Soybeans, Soybeans, Edible Beans $109.13 73340428 Extenda-Wear Grain, Corn, Kit Grain, Corn, Soybeans, Wear Kit Edible Beans $220.28 TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS FALL PARTS 2011 21

FLAGSHIP COMBINES ROTOR CAGE KITS ROTOR CAGE KIT Includes: Stainless-steel vanes and high-strength T-bolts Eleven long vanes with three retaining bolts are installed in this cage kit the RH front and RH rear) is designed to reduce rotor power consumption and improve service life for threshing system components Using a genuine Case IH rotor cage kit is highly recommended for optimum performance of your combine PART P RT NO. NO. DESCRIPTION PRICE 87393080E* Standard Wear W Vanes, V Metric Hardware $1270.81 84480923 87391297 Extenda-Wear W Vanes, Metric rdware Vanes, Metric Hardware $2467.08 ** Wear-resistant W r resistant AR235 steel steel for for longer longer service service life life EXTENDA-WEAR ROTOR CAGE STAINLESS-STEEL TRANSPORT VANE KIT Increased thickness 3/16" 50% thicker Stainless-steel material The combination of thicker material and more wear-resistance material provides longer service life PART P RT NO. NO. DESCRIPTION DESCRIPTION APPLICATION APPLICATIOAT N PRICE 84084818 Metric Hardware Rotor Cage Rotor with Cage Vanes with Vanes $670.75 84084818 Metric Hardware on Right on Side Right of Side Cage of Cage (2005 Models (2005 Models and prior) and prior) 87298775 Eleven Eleven Long Long Vanes 2006 Rotor Cages $301.31 87298775 with Vanes English with English 2006 Rotor Cages Hardware Hardware 87298776 Eleven Eleven Long Long Vanes Vanes 2006 Rotor Cages $359.70 87298776 with 2006 Rotor Cages with Metric Metric Hardware Hardware Part No. 84084818 STAINLESS-STEEL CAGE REPAIR T-BOLT KIT Includes: 10 bolts and 10 nuts PART P RT NO. NO. DESCRIPTION DESCRIPTION PRICE B95908 3/8" x 3/8" 1-1/2" x 1-1/2" $17.96 B96425 3/8" x 3/8" 1-1/8" x 1-1/8" $17.60 22 FALL PARTS 2011

FLAGSHIP COMBINES CONCAVES FRONT ROTOR MODULES FRONT POSITIONS Grain, small wire 3/16" heat-treated Corn/Rice, large wire 1/4" Rice, large wire 1/4" heat-treated Edible beans, slotted REAR POSITIONS Rear rotor modules are also a two, two-piece design, nonadjustable, with only two bolts each for removal. Large skip wire for corn/soybeans/small grain and rice* Slotted for edible beans SOLID ROTOR MODULES Solid rotor modules are available through service parts and are high MOG conditions where it is important to prevent MOG from overloading the cleaning system. * Large skip wire rotor modules are the same as large wire front modules (code PC) but 1/2 the wires have been removed. Customers can add or remove wires to better control rotor loss and/or MOG load on cleaning system. HEAT-TREATED ROUND BAR MODULE KIT Includes: Both LH and RH modules Part No.: 87298940 MODULE OPTIONS PA RT NO. LH 87282761 87282764 86976416 86976414 86999090 86999097 PA RT NO. RH DESCRIPTION POSITION Rotor Module, Round Bar Front Rotor Module, Large Wire 1/4" Diameter, Front Heat-Tr eated Rotor Module, Large Wire 1/4" Diameter Front 87000772 87000774 Rotor Module, Slotted Front 86976420 86976418 Rotor Module, Small Wire 3/16" Diameter, Front Heat-Tr eated 87109198 87109201 Rotor Module, Large Skip Wire Rear 87106651 87106653 Rotor Module, Solid Rear TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS

Flagship combines SIEVES COMBINE SIEVE SELECTION PRESIEVE PA RT NO. DESCRIPTION 87109815 Sieve, Pre-Cleaner, r, 1-1/8" Adjustable 52" 87109817 Sieve, Pre-Cleaner, r, 1-1/8" Adjustable 62" 87109819 Sieve, Pre-Cleaner, r, 1-5/8" Corn Slat Adjustable 52" 87109821 Sieve, Pre-Cleaner, r, 1-5/8" Corn Slat Adjustable 62" 87109824 Sieve, Pre-Cleaner, r, 1-5/8" Closz Slat Adjustable 52" 87109826 Sieve, Pre-Cleaner, r, 1-5/8" Closz Slat Adjustable 62" Pre-Cleaner Sieve UPPER SIEVE PA RT NO. DESCRIPTION 84084985 Sieve, 1-1/8" Upper 52" 84084984 Sieve, 1-1/8" Upper 62" 84084982 Sieve, 1-1/8" Peterson Upper 52" 84084981 Sieve, 1-1/8" Peterson Upper 62" 84084662 Sieve, 1-5/8" Corn Slat Adjustable Upper 52" 84084664 Sieve, 1-5/8" Corn Slat Adjustable Upper 62" 84084323 Sieve, 1-5/8" Closz Slat Upper 52" 84084324 Sieve, 1-5/8" Closz Slat Upper 62" LOWER SIEVE PA RT NO. DESCRIPTION 84084325 Sieve, 1-1/8" Adjustable Lower 52" 84084326 Sieve, 1-1/8" Adjustable Lower 62" 84084327 Sieve, 1-5/8" Closz Slat Adjustable Lower 52" 84084328 Sieve, 1-5/8" Closz Slat Adjustable Lower 62" Upper Sieve ROUND-HOLE SIEVE PA RT NO. DESCRIPTION 84084506 Sieve, Chaffer Round Hole 2.5 mm 52" 84084507 Sieve, Chaffer Round Hole 2.5 mm 62" 84084510 Sieve, Chaffer Round Hole 10 mm 52" 84084511 Sieve, Chaffer Round Hole 10 mm 62" 9560145 Sieve, Chaffer Round Hole 16 mm 52" 9560147 Sieve, Chaffer Round Hole 16 mm 62" 9560146 Sieve, Chaffer Round Hole 18 mm 52" 9560148 Sieve, Chaffer Round Hole 18 mm 62" SIEVE FRAME ONLY PA RT NO. DESCRIPTION 742134 Sieve, Round Hole Frame 52" 742135 Sieve, Round Hole Frame 62" Sieve with Finger Kit 24 Fall Parts 2011

Flagship combines CHOPPER KNIFE KITS STRAW CHOPPER KITS Includes: Rotor with mounted blades, heavy-duty bearing and mounting hardware Complete straw chopper service kit is available for machines that require a replacement rotor The complete rotor is factory-balanced for smooth performance PART P RT NO. NO. DESCRIPTION PRICE 87298771 Fine cut Cut with 56 56 Blades $3510.43 87298770 standard Standard cut Cut with with 28 28 Blades $2759.32 BEARING KIT CHOPPER ROTOR Includes: Three heavy-duty bearings and mounting hardware Part No.: 84174156 Price: $352.34 Part No. 87298770 www.bestcaseihparts.com FIXED STRAW CHOPPER KNIFE KIT Complete set. PART P RT NO. DESCRIPTION PRICE 87297767 coarse Coarse cut Cut $72.51 87297768 Fine cut Cut $140.86 FIXED CHOPPER KNIFE ASSEMBLY STANDARD CHOPPER Includes: Easy to assemble. Part No. 87297768 PART NO. DESCRIPTION PRICE 87670026 coarse cut $949.15 87670027 Fine cut $960.92 FIXED CHOPPER KNIFE ASSEMBLY FOR 3X3 INTEGRATED CHOPPER Includes: Fixed knife assembly (20 knives) Part No.: 84226176 (Standard Cut) Price: $1615.18 Tillage grease/filtration Mower/Baler accessories Flagship combines Mid-range combines corn header KiTs grain platform KiTs Fall Parts 2011 25

accessories accessories LUBRICATION LUBE MINDER AUTOMATIC CHAIN LUBRICATION SYSTEM Application: 1600/2100/2300 Series Combines Lube Minder cycles every time you swing the off loading auger chute Fully adjustable pump for just the right amount of lubrication Increases chain life, reduces downtime Increases productivity PA RT NO. B94558 B94556 B94557 APPLICATIOAT N Grain Platform and Corn Head Kit (Also requires Part No. B94556 or B94557) 1600 Series Combines 2100/2300/2500 Series Combines Part No. B94556 26 Fall Parts 2011

accessories LUBRICATION AUTOMATED LUBRICATION SYSTEM Auto-lube System Kit is designed to service up to 40 lubrication points on the combine. Kit available for 1020 header designed to service 13 lubrication points. The system consists of a 12 VDC electric pump designed to pump Case IH 251H grease. It incorporates an easy accessible, adjustable timer and a clear, high impact polymer reservoir for visual indication of lubricant level. The grease is proportioned by positive displacement metering valves that supply the proper amount of grease to each of system operation. Kit includes all components and installation instructions. SYSTEM FEATURES AND BENEFITS The auto-lube systems have been in use for 30 plus years, with use on off-road equipment since 1994. Currently available for Case IH Big Square Balers. Increases combine uptime minimum of 1/2 hour productivity per day by eliminating daily manual lube automatically, once an hour, with small amounts of grease while the machine is in operation! Contaminants are purged and effective seals are created Fresh grease is maintained on all critical wear surfaces Reduces manual labor for daily lubrication and repairs. Eliminates wasted grease resulting from manual lubrication. System Schematic WHY AN AUTOMATED LUBRICATION SYSTEM IS BETTER: MANUAL LUBRICATION VS. AUTOMATED LUBRICATION Manual Lubrication Inconsistent lubrication Can t lubricate while running Potential contamination Premature pin, bushing and bearing wear Labor expense/morning maintenance Automated Lubrication Constant lubrication (runs every 30 min.) Lubes while combine runs Closed system no contamination Extended component life Less downtime PA RT NO. DESCRIPTION APPLICATIOAT N B96372 Automated Lubrication System 2100/2300 Series Combines B96374 Automated Lubrication System 1020 Headers 73340167 Automated Lubrication System 5088/6088/7088 Combines B96092 Quick-Fill Grease Gun Case IH Automated Lube Systems Tillage grease/filtration Mower/Baler accessories Flagship combines Mid-range combines corn header KiTs grain platform KiTs Fall Parts 2011 27

accessories OBSERVATION SYSTEMS / MOISTURE TESTERS VOYAGER TOUGHCAM OBSERVATION SYSTEMS Avoid costly accidents with the new ToughCam Observation Systems. More than just a backup camera, this system provides Part No. ZAEVOSZMDCL1B cause crop loss, equipment damage or dangerous situations. Excellent low light and high bright environment performance Equipped with 14 infrared LEDs to assist illumination Shock and vibration resistance Waterproof (Tested unit immerged in 1m of water for 30 min) VOYAGER TOUGHCAM SINGLE CAMERA OBSERVATION SYSTEM Includes: 7" LCD Observation Monitor, Super CMOS Color Camera, Universal LCD Monitor Pedestal Mount, 25' Camera Extension Cable, 75' Camera Extension Cable VOYAGER TOUGHCAM TWO CAMERA OBSERVATION SYSTEM Includes: 7" LCD Observation Monitor, Super CMOS Color Camera (2), Universal LCD Monitor Pedestal Mount, 25' Camera Extension Cable (2), 75' Camera Extension Cable PART P RT NO. NO. ZaeVosZMDcl1B ZAEVOS7MDCL1B ZaeVosZMDcl2B ZAEVOS7MDCL2B ZaeaoM13 ZAEAOM713 ZaeVcMs10B ZAEVCMS10B ZaeVosMDMMt ZAEVOSMDMMT ZAECEC25-M Zaecec25-M ZAECEC75-M Zaecec75-M DESCRIPTION APPLICATIOAT N single Single camera Camera observation Observation system System two Two camera Camera observation Observation system System 7" lcd 7" LCD observation Observation Monitor Monitor super Super cmos CMOS color Color camera(s) Camera(s) Universal LCD Monitor Universal lcd Monitor Pedestal Pedestal Mount Mount 25' Camera Extension Cable 25' camera extension cable 75' Camera Extension Cable 75' camera extenstion cable MT-16 GRAIN MOISTURE TESTER (SUPERSEDES MODEL MT3) Part No.: B96650 Price: $232.88 Direct readout for 16 grains: barley, and wheat (4) Each scale can be adjusted to match local elevator Automatically averages up to 99 test results Repeatability in normal range of stored grain within 0.5% of air-oven standard. Higher-frequency, capacitive circuit improves accuracy. Includes sturdy carrying case with strap 2-year warranty in North America, 1-year overseas MT-PRO MULTI-GRAIN, MULTI-LANGUAGE, GRAIN MOISTURE TESTER Part No.: B96649 Price: $235.50 39 grain scales Information displays in 7 languages: English, French, German, Spanish, Portuguese, Italian & Swedish Multi-Point adjustable calibration Averaging capability displays running average of tests Back lighted display Higher-frequency, capacitive circuit improves accuracy Enhanced temperature compensation circuit Optional carrying case (Part No. 87297026) GMTGRIND GRAIN MOISTURE TESTER Part No.: 73340415 Price: $350.63 Fast and accurate solution for determining the moisture content of 17 different grains barley, winter barley, wheat, buckwheat, oats, rye, triticale, peas, corn, beans, mustard, red clover, white clover, ryegrass before, during and after harvest. New, more accurate grinding test cell Smallest sample size of any portable tester Sturdy carry and storage case Easy-to-read LCD display Measuring range: 0 C to 50 C Display of battery voltage Two-year limited warranty 28 Fall Parts 2011

accessories MOISTURE TESTERS MOISTUREMATCH GRAIN TESTER Part No.: B95379 Price: $294.89 Large Graphic LCD shows multiple readouts and on-line instructions. Backlit for night use. Averaging Capability displays the last six test results and running average of tests. Individual results can be deleted. 33 Grain scales MOISTUREMatch Technology user selects Motomco 919E, DICKEY-john GAC 2000, Labtronic (Canada), Industry Standard. Compaction Sensor Technology displays moisture automatically when optimum grain compaction threshold is reached Larger Test Cell for more representative sample inside test cell between uses Molded Hand Grip for safe & comfortable operation Computer Interface for updating moisture scales and software upgrades. RS 232 serial port uses standard computer serial cable (not included). Optional Carrying Case (Part No. B95380) MOISTURE-MAX & MOISTURE-MAX PLUS Includes: Moisture-Max, loader, carrying case, belt clip, 9V battery, instruction manual and 1-year manufacturer s warranty THE WORLD S MOST ACCURATE HANDHELD GRAIN MOISTURE ANALYZER The Case IH Moisture-Max and Moisture-Max plus grain moisture Two versions are available: Moisture-Max for highly accurate moisture testing Moisture-Max plus the ONLY handheld moisture tester that measures accurate test weight U.S. FEDERAL STANDARD TECHNOLOGY DICKEY-john s technology in the Moisture-Max and Moisture-Max plus is based on the GAC2100b, the U.S. federal grain standard. UNSURPASSED BENEFITS FOR FARMING Whether you re harvesting, storing or trading grain, nothing is more important to its value than its moisture content and test weight. With the Moisture-Max plus you can measure moisture and test weight, and it s fast, easy and accurate. And no screw cap which can damage grains, create oily residue and are cumbersome to use. PORTABLE GRAIN KIT Includes: MT-16 Grain Moisture Tester, grain test weight scale, sturdy carry and storage case, complete instructions, two 9V alkaline batteries and two-year limited warranty Part No.: 73340406 Price: $312.50 The Portable Grain Kit includes the MT-16 Grain Moisture Tester that features direct readouts for 16 grains. The portable hanging grain scale determines the test weight of different varieties of grain. It also measures bin capacities and feed quality. Metric or standard weights. 15.5" long. Capacity: 15 to 70 lbs. per bushel, 20 to 90 kg per hectoliters. FEATURES: Menu-driven operating system An internal scale (no pre-weighing) USB compatibility for calibration loading Test weight readout (Moisture-Max plus) Used for over 450 grains and products Automatic temperature compensation PART P RT NO. NO. DESCRIPTION DESCRIPTION PRICE 87299137 87299137 Moisture-Max Moisture-Max Package Package $420.00 87299138 87299138 Moisture-Max plus Package Moisture-Max Plus Package $520.00 87299898 Loader Moisture-Max plus Carrying Case Tillage grease/filtration Mower/Baler accessories Flagship combines Mid-range combines corn header KiTs grain platform KiTs Fall Parts 2011 29

choose A BAlER to Fit YoUR crops AND conditions lbx 3 Series large square balers for dry hay straw and silage, a lbx 3 series large square baler offers high-capacity baling to improve your productivity. create ultra-dense, easy to feed bales in the length you choose. these bales stack neatly on a flatbed trailer to maximize your payload and minimize handling. WD 3 Series Windrowers handle heavy crops, wet conditions and hillsides with a WD 3 series Windrower that allows you to work faster and easier with in-cab hydraulic header and cutter bar controls. RB 4 Series round balers give your livestock more edible feed with a rb 4 series round baler that packs your nutrient-rich crop into dense, uniform, weather-resistant bales. control bale formation and density with the easy-to-use, incab monitor. SEE YOUR CASE IH DEALER ABOUT A BALER TO BEST HANDLE YOUR LOADS. case ih is a registered trademark of cnh america llc. 2011 cnh america llc., 700 state street, racine, Wi 53404 Usa. all rights reserved. www.caseih.com 30 Fall Parts 2011

Round Baler - MaintENance Kits Application: RBX443-RBX563, RB444-RB564 Designed for larger repair jobs Includes major components OE components Starter Roll Drive Kit Part No. 87298512 $258.89 Top Roller Chain Drive Kit Part No. 87298513 $596.20 Apron & Clutch Drive Sprocket Kit Part No. 87298524 $82.41 Application: RB444-RB564, RBX443-RBX563 Pickup Guard Kit 10-pack Part No. 87298536 $128.45 Idler Sprocket Kit Part No. 87298552 $53.89 Bearing Kit: Drive Roller Part No. 87298537 $248.40 Bearing Kit: 2-Pack Roller Tailgate Nose Part No. 87298538 $138.79 Bearing Kit: 2-Pack Top Tailgate Roller Part No. 87298539 $134.45 Carrier Bearing Kit 2M reel with curved fingers - 6-pack Part No. 87298530 $101.31 Pickup Finger Kit 10-pack Part No. 87298970 $64.37 Tillage Grease/Filtration Mower/Baler Accessories Flagship Combines Mid-Range Combines Corn Header Kits Grain Platform Kits Fall Parts 2011 31

Disc Mower/Mower Conditioners Knife Selection CASE IH DISC MOWER CONDITIONERS AND WINDROWERS WITH DISC HEADS 7 14 STD. 14 serrated V FOR ROCKY CONDITIONS Rotary Disc Mower Blade Selection 7 TWIST KNIVES The 7 twist knives are recommended for abrasive soil and rocky crop cutting conditions. These knives function well in a wide range of field and cutting conditions. 14 TWIST KNIVES (STANDARD EQUIPMENT) AND 14 TWIST SERRATED KNIVES The 14 twist knives are recommended for most crop conditions. The greater twist angle enables the knife s cutting edge to cut closer to the ground and provide more lifting action to move the crop over the cutter bar into the conditioner, producing a cleaner cut. The greater twist angle in these knives makes them more susceptible to rock damage. V KNIVES The V knives are recommended for operation in rocky conditions where excessive knife bending is a concern. This style knife has greater resistance to bending when coming in contact with a foreign object. The cutting quality of this knife is not as good compared to the twisted knives. Part NO. DESCRIPTION/TYPE PITCH/ROTATION 9847683 KNIFE - 7 TWIST CW 9847684 KNIFE - 7 TWIST CCW 86621872 KNIFE - 14 TWIST CW 86621873 KNIFE - 14 TWIST CCW 87029587 KNIFE - 14 TWIST OS CW 87029588 KNIFE - 14 TWIST OS CCW 86532078 KNIFE - V ROCK BLADE Disc Mower Knife with Hardware Kits Disc Mower Knife with Hardware in Handy Service Packs Application: Disc Mowers - DCX91, DCX101, DCX131, DCX132, DCX161 with lifters Windrower heads: RDX161, RDX162, RDX181 with lifters Part NO. DESCRIPTION/TYPE PITCH/ROTATION 87298470 7 TWIST CW 87298471 7 TWIST CCW 87298468 14 TWIST CW 87298469 14 TWIST CCW Disc Mower Knife 14 Twist Part No. 87298468 $12.84 Disc Mower Knife 14 Twist Serrated Part No. 87298467 $17.61 Disc Mower Knife - Rock Knife Part No. 87298472 $16.87 87298466 14 OS (SERRATED) CW 87298467 14 OS (SERRATED) CCW 87298472 V ROCK BLADE 32 Fall Parts 2011

shock protection system KiTs shock protection system KiTs Shock Protection System Hub Retro-fit Kit. Components for two modules. Part No. 87602273 $124.80 Shock Protection System Hub Repair Kit. Components to repair one Shock Protection. Part No. 87580643 $40.31 less downtime and less repair cost with the new shock protection system hub Kits. The Shock Protection System Hub Kits are designed to provide shock protection to the individual cutter bar modules should the knives contact larger obstacles. the new style shock hub has a reduced number of splines, which will shear off prior to failing internal cutter bar gear teeth. Provides protection for the top cap assembly. retro-fit kit includes a hub seal which prevents any metal fines from entering and damaging module components. clamp loading on the shock hub drives the disc after shearing to prevent domino effect failures by allowing disc to partially retime. Shock Protection System Hub Retro-fit Kits can be quickly and easily installed. Components and installation instructions included in the retro-fit kit, Part no. 87602273. Shock Protection System Hubs can be quickly and easily repaired. Components and installation instructions included in the repair kit, Part no. 87580643. Tillage grease/filtration Mower/Baler accessories Flagship combines Mid-range combines corn header KiTs grain platform KiTs Fall Parts 2011 33

SUPPORT FOR YOUR CASE IH HAY MACHINES Hay Preservative PM-13721 Case IH Cutting Parts PM-12503 Rotary Disc Mower Knives PM-14652 Productivity Guide Case IH Self Propelled Windrower PM-13751 Productivity Guide Case IH Large Square Baler PM-13749 Shock Protection System Kits Parts and Service PM-14066 Productivity Guide Case IH RBX Series Round Baler PM-13750 Case IH Hay Machines Product Support Kits PM-14153 Productivity Guide Case IH Sickle Mower Conditioner PM-13752 Productivity Guide Case IH Disc Mower Conditioner PM-13753 If you are looking for more support or information on your Case IH haying equipment, contact your local Case IH dealer. Your dealer can order a copy of the productivity guide that you need. Featured on this page are some of the guides and an ID number by which to order them. www.caseih.com 34 Fall Parts 2011

With Tier 4, Case IH has given us an engine that does what it s supposed to do: produce power. Mark Yaggie Breckenridge, MN Mark Yaggie and his Dad, David, tried a new Tier 4 Steiger on their 12-row beet lifter last fall. In addition to sugar beets, the Yaggies raise wheat and corn on their southern Red River Valley farm. Mark wasn t sure what to expect from this new Case IH Tier 4 compliant engine, but it didn t take him or his men long to become fans. To run our 12-row beet lifter, we needed more power than you can get from the biggest MFD tractors, Mark says. They tested the new row crop Steiger 400 with RTK guidance. The row crop Steiger 400 gave us the power and traction we needed. With the RTK, the tractor and the beet lifter stayed on the rows at all times of the day and night to give us a smooth and efficient lifting operation. The new, bigger cab with the extra swivel in the seat made it easier for the operator to see all the way across the lifter, Mark says. Plus, the new Tier 4 engine is a good one. 3.5 gallons of DEF per 100 gallons of diesel fuel Once you ve run these new Tier 4 tractors, you ll quickly see the additional DEF (diesel exhaust fluid) for the emissions program is no big deal. We were using 3.5 gallons of DEF for every 100 gallons of diesel fuel. Depending on what you re doing, you ll be fine filling the DEF tank every two or three days, Mark explains. Turn back the clock to more power With the DEF fluid taking care of the emissions after they ve left the engine, this engine can be tuned to do what every farmer wants from a tractor engine: produce power. It s like going back to a 1975 diesel engine. There s no EGR valve. It s tuned to produce fuel-efficient power. Unlike those old engines, this new Tier 4 Case IH engine burns clean, no black smoke, no smell, just power, Mark says. Learn more about Mark s experience by visiting CaseIHRoughriders.com. And ask your dealer how a new Case IH Tier 4 Steiger or Magnum tractor will help your farm with more power and better fuel economy. David, left and Mark Yaggie are pleased with the power and fuel savings from their new Case IH Tier 4 row crop Steiger 400 tractor. Visit the Case IH website: http://www.caseih.com 2011 Case IH Dealers / All rights reserved. Case IH is a registered trademark of CNH America LLC. Fall Parts 2011 35

I can t wait to switch everything over to the new Case IH Tier 4 engines. LarrY JOHnSOn christine, nd In the summer of 2010, Larry Johnson had the chance to test a new Case IH Tier 4 tractor on his farm. He explains, One of the Case IH tractor engineers called me and asked if I d put some hours a new Steiger 450 row crop tractor to see how it worked. I said, Sure, let s give it a try. Larry and his family raise spring wheat, soybeans and corn on their Red River Valley farm south and west of Fargo. Raising seed soybeans is an important part of the Johnson farm. More power, better fuel economy Larry s big tractor is currently a Tier 3 Steiger 485 Quadtrac. He put the new Tier 4 wheeled Steiger 450 on the same equipment he pulls with the 485 Quadtrac. Larry says, The fi rst thing I noticed was the power on the new Tier 4 Steiger. The new 450 was 35 horsepower less than 485 and yet it felt like it handled our Case IH Ecolo- Tiger deep ripper as well as the 485. Larry continues, The second thing I noticed was the fuel economy. The new Tier 4 engine was using a gallon to a gallon and one-half less fuel every hour pulling the same load. With the price of fuel these days, that s going to save money every time that tractor goes to the fi eld. The DEF fluid is a good program When I learned how Case IH is using the DEF (Diesel Exhaust Fluid) after the exhaust has left the engine, I understood why these new Tier 4 engines give more power and fuel economy. This technology has freed the engine to do its job: produce power. The DEF fl uid takes care of the exhaust and emissions. The engine runs cooler, breathes better and produces more power. Farmers will want to check this out. Case IH Tier 4 engines are a good program." Learn more about Larry s experience by visiting CaseIHRoughriders.com. And ask your dealer how a new Case IH Tier 4 Steiger or Magnum tractor will help your farm with more power and better fuel economy. Larry Johnson appreciates the power and fuel efficiency of his new Tier 4 Magnum 210 tractor. Visit the Case IH website: http://www.caseih.com. 2011 Case IH Dealers / All rights reserved. Case IH is a registered trademark of CNH America LLC. 36 Fall Parts 2011

Fall Parts 2011 39

GREASE TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS Fall Parts 2011 39

FILTRATION 40 Fall Parts 2011

FILTRATION TILLAGE GREASE/FILTRATION MOWER/BALER ACCESSORIES FLAGSHIP COMBINES MID-RANGE COMBINES CORN HEADER KITS GRAIN PLATFORM KITS Fall Parts 2011 41

42 Fall Parts 2011

Fall Parts 2011 43

44 Fall Parts 2011

Fall Parts 2011 45

46 Fall Parts 2011

Fall Parts 2011 47

48 Fall Parts 2011

Fall Parts 2011 49

Tillage 50 Fall Parts 2011 NOtE: FIElD PErFOrMaNCE VarIEs BasED ON soil and OPEratING CONDItIONs.

Tillage Tillage grease/filtration MOWeR/BaleR accessories FlagSHiP COMBiNeS MiD-RaNge COMBiNeS CORN HeaDeR KiTS grain PlaTFORM KiTS Fall Parts 2011 51

Tillage 52 Fall Parts 2011

Tillage Fall Parts 2011 53

Tillage Earth Metal Cultivator Sweeps Maxxi-Width Constant width wing design for maximum performance Heavy-duty 1" reinforced wear tip for improved penetration and less draft Fits Case IH and most other makes of field cultivators Maxxi-Point Heavy-duty extended nose with 1/2" wear point for increased wear life and penetration High-strength alloy steel and superior heat-treatment promote better scouring and longer wear life Constant width wing design Maxxi-Grip 20% heavier than Maxxi-Width sweep for increased wear life Mounts to heavy-duty cast adapter. Easy to install. Easy to remove. Neoprene gripper strips on the side of the casting, hold sweep firmly in place Maxxi-Point Plus Same outstanding design and manufacturing features as the Maxxi-Point sweeps, PLUS a new two-part design to reduce replacement time Mounts to heavy-duty cast adapter. Easy to install. Easy to replace. 54 Fall Parts 2011

We bought the new 330 Turbo because we were looking for a better way to do tillage. Art & Steve Jarding Alexandria, SD As the spring of 2010 approached, Art, Steve, Jason and Terry Jarding thought it was the right time to change their tillage practices. Art (pictured below) explains: Normally, we disk our cornstalks in the spring and follow with a fi eld cultivator pass. We d work soybean ground with the field cultivator. We ve had our eye on the new 330 Turbo, thinking it could do a better job all by itself. After we had it on the farm for a demo, we bought it right away. The Jardings southeast South Dakota farm includes corn, soybeans, stock cows and feeder cattle. They bought the new Case IH True-Tandem 330 Turbo, knowing that sometimes their ground is too wet for spring disking. The 330 Turbo s ability to work the ground shallow while cutting the corn and soybean residue appealed to us, Steve says. We wanted to get away from the clodding that you sometimes get with a disk. COMPETITIVE DEMO The Jardings saw the 330 Turbo run side-by-side with a competitive vertical tillage implement. One of our neighbors was trying a competitive coulter machine and brought it over to see the two run next to each other. The advantages of the 330 Turbo were obvious, Steve says. We especially liked the wavy Case IH blades, set at an angle. They size the residue and do a better job of mixing the soil and residue. The rolling baskets on the 330 Turbo did the best job of leveling. It was clear to all of us that the 330 Turbo is a better machine. SAVE FUEL AND LABOR The Jardings are pulling their 34-foot 330 Turbo at 9 mph with their 300 hp 9250 Case IH Steiger tractor. We ll be able to cover the ground faster with less fuel, and we won t have one man spending the whole spring switching our big tractor between the disk and the field cultivator, Art says. We think the 330 Turbo is a better way to do our spring work. See your South Dakota Case IH dealer today about a new Case IH True-Tandem 330 Turbo for your farm. The new Case IH True-Tandem 330 Turbo helps the Jardings improve their farm. Note the shallow implement depth, the mixing action of both the rolling baskets and the patented Case IH shallow concave disks, with the final product: a sized, level seedbed. Visit the Case IH website: http://www.caseih.com 2011 Case IH Dealers / All rights reserved. Case IH is a registered trademark of CNH America LLC. Fall Parts 2011 55

Better Terms, Low Minimum Purchase! No Payments, No Interest for 90 Days * *CNH Capital Commercial Revolving Account features NO PAYMENTS AND NO INTEREST FOR 90 DAYS, no matter when you buy now through September 30, 2011, on qualified purchases of Genuine CNH Original Parts and related service purchases made on the CNH Capital Commercial Revolving Account. With a low $750 minimum purchase per visit, qualifying customers may take advantage of this flexible extended-terms offer. 2011 CNH Capital America LLC. All rights reserved. Customer participation subject to credit qualification, available credit and good standing on all CNH Capital America LLC accounts. This offer applies to qualifying purchase of $750 or more of genuine CNH parts and related services made using the CNH Capital Commercial Revolving Account during a single visit to a participating CNH dealership located in the United States July 1, 2011 through September 30, 2011. If any payment, when due, is not made on other balances outstanding under the account, the promotional terms may be terminated and the promotional balance subject to the applicable default rate prior to the expiration of the promotional period. Once the promotional period ends, CNH Capital America LLC standard terms and conditions will apply. Customer participation subject to credit qualification, available credit and good standing on all CNH Capital America LLC accounts. Not all customers may qualify for this rate or term. Program subject to change or cancellation without notice. Visit the Case website: www.caseih.com PRICING POLICY Prices listed are limited-time, special prices available only at participating dealers. The price quoted is for the part itself. Installation charges, if any, are extra. All parts may not be available at all participating dealers. NOTE: These special offers may not be used in combination with any other offers. All prices are subject to change without notice. 2011 Case IH Dealers / All rights reserved. Case IH is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC are the property of those respective companies.