1
DRILL ELECTRIC DRILL and IMPACT DRILL Standard Accessories KW0700026: 1pc Impact Drill 5pcs Masonry Drills 9pcs Twist Drills KW0700026 KW0701000 KW0701002 KW0701001 5pcs Grinding Stones 1pc Case KW0700026 KW0701000 KW0701002 KW0701001 Impact Drill Set 13mm, 450W Impact Drill 13mm, 950W, Impact Drill 13mm, 650W (21pcs) 2 Speed Electric Drill 10mm, 400W Max. Drilling In Steel / Wood / Concrete (mm) 10 / 20 / 13 13 / 25 / 13 13 / 30 / 16 10 / 10 / Not Available Input Power (W / V / Hz) 450 / 220 / 50 650 / 220 / 50 950 / 220 / 50 400 / 220 / 50 No. Load Speed (rpm) 0 ~ 2500 0 ~ 3000 0 ~ 100 / 0 ~ 3000 0 2900 Dimension L x W x H (cm) 36 x 7.5 x 19.5 30 x 7 x 23 35 x 8 x 21.5 22 x 6 x 17.5 Weight (kg) 1.9 2.2 3.2 1.5 CORDLESS DRILL KW0701231 KW0701605 Li-ion Tech. KW0701231 KW0701605 Cordless Drill Cordless Drill 10mm, 2 Speed 10.8V 10mm Lithium-ion Battery Max. Drilling Steel / Wood (mm) 10 / 35 Input Voltage (DCV) DC18V DC10.8V No. Load Speed (rpm) 0 550 0 300/0 1050 Torque (N.m) 16 18 Dimension L x W x H (cm) 8 x 9 x 28 30 x 9.5 x 26.5 Weight (kg) 1.5 0.95 CORDLESS IMPACT DRILL KW0701232 Battery Indicator Li-ion Tech. KW0701232 KW0701704 Cordless Impact Drill Cordless Impact Drill 10mm, 2 Speed 18V 10mm, 2 Speed Lithium - Ion Battery Spesification Max. Drilling Steel / Wood / Concrete (mm) 10 / 35 / 13 Input Voltage (DCV) DC 18V No. Load Speed (rpm) 0 ~ 400/0 ~ 1150 0 ~ 350/0 ~ 1200 Torque (N.m) 16 28 ~ 42 Dimension L x W x H (cm) 28 x 9 x 28 27 x 7 x 23.5 Weight (kg) 1.5 1.8 KW0701704 ROTARY HAMMER DRILL 10003364 10003365 Standard accessories : 1pc SDS plus 8 x 150 mm 1pc SDS plus 10 x 150 mm 1pc SDS plus 12 x 150 mm 1pc SDS plus chisel bit 250 mm 1pc SDS plus flat chisel 250 14 x 250 mm 1 pc Auxiliary Handle 1 pc Depth Gauge 1 pc Dust Cap Features : Die cast magnesium alloy housing, light weight and suprior heat dissipation and enchances body strength (10003364, 10003365) Double anti-vibration system (10003365) Auto stop carbon brush to protect armature extensively (10003365) Overload safety clutch to protect armature and ensure your safety (10003365) 10003364 10003365 Rotary Hammer Drill 26 mm, 950W Rotary Hammer Drill 32 mm, 1250W Spesification Max. Drilling In Steel / Wood / Concrete (mm) 13 / 30 / 26 13 / 40 / 32 Input Power (W / V / Hz) 950 / 220 / 50 1250 / 220 / 50 No. Load Speed (rpm) 1000 800 Impact Rate (bpm) & Power (J) 3200 & 3 2600 & 4.5 Dimension L x W x H (cm) 40 x 8 x 21 42 x 11 x 25 Weight (kg) 2.9 5.2 2
DRILL and GRINDER DIAMOND CORE DRILL 10041833 10041832 Diamond Core Drill 120mm Note : Unit not include Diamond Core Bit 10041833 10041832 Diamond Core Drill with Stand 260mm Max. Drilling (mm) Ø120 Ø260 Input Power (W / V / Hz) 1150 / 220 / 50 2500 / 220 / 50 No. Load Speed (rpm) 0 ~ 1800 720 Thread Male 1 / 2 Dimension L x W x H (cm) 40 x 14 x 20 50 x 37 x 98 Weight (kg) 5.7 32.6 Optional Accessories: Thread KW0200603 Core Drill Bit Set (11pcs) Female 1 / 2 KW0200921 Core Drill Adapter KW0200922 Diamond Core Bits 26 ~ 400mm Female 1 / 2 KW0200923 Diamond Core Bits 50 ~ 400mm Female 1 / 2 KW0200924 Diamond Core Bits 76 ~ 400mm Female 1 / 2 KW0200925 Diamond Core Bits 102 ~ 400mm Female 1 / 2 KW0200926 Diamond Core Bits 152 ~ 400mm Female 1 / 2 KW0200927 Diamond Core Bits 202 ~ 400mm Female 1 / 2 Drill Adapter Male G1/2 Female 1 1 / 4-7 MAGNETIC CORE DRILL 1 Speed 2 Speed 4 Speed Optional Accessories : 10047411 Article No 10047411 10047422 10047423 Magnetic Core Drill 35 x 50mm Magnetic Core Drill 2 Speed 50 x 75mm Magnetic Core Drill 4 Speed 75 x 50mm Max. Capacity - Ø X Depth of Core Drill (mm) 35 x 50 50 x 75 75 x 50 - Ø X Depth of Twist Drill Bit (with Drill Chuck) (mm) 13 x 110 16 x 110 - Ø X Depth of MT3 Tapper Shank Drill - Cold (mm) - 32 x 150 - Ø X Depth of Tap (with Optional MT3 Tapping Chuck) - Warm (mm) - 25.4 x 40 Motor (kw / V / Ph) 1.1 / 220 / 50 1.8 / 220 / 50 No. Load Speed 10047422 10047423 Standard Accessories : Drill chuck & Arbor Key chuck Coolant Tank Chip guard Safety chain Punch Plastic Case Center Pin KW0200686, KW0200687 Optional Accessories: 13mm Tapping Adaptor Tapping Attachment Optional MT3 accessories available for : Tapping up to 25mm Twist Drills up to 32mm (MT3) Reamers Countersinks Core Drill KW0200606 ~ KW0200624 MT3 Small Range Tapping Chuck & Clamp Collet Tool Holder KW0400525 MT3 Large Range Tapping Chuck & Clamp Collet Speed 1 (rpm) 350 / 620 230 / 380 90 / 150 Speed 2 (rpm) - 300 / 500 120 / 200 Speed 3 (rpm) - 180 / 300 Speed 4 (rpm) - 230 / 380 Magnetic Adhesion (N) 15000 32000 Dimension L x W x H (cm) 25 x 27 x 44 30 x 25 x 50 30 x 25 x 52 Weight (kg) 12.6 21 24.8 ANGLE GRINDER 10003334 10003942 10003334 10003942 Angle Grinder Angle Grinder 100mm, 570W 180mm, 2200W Max. Wheel Diameter (mm) 100 / 4 180 / 7 Hole Diameter of Wheel (mm) 16 22 Input Power (W / V / Hz) 570 / 220 / 50 2200 / 220 / 50 No. Load Speed (rpm) 13000 8300 Dimension L x W x H (cm) 26 x 7.5 x 9 49 x 10.5 x 14 Weight (kg) 2.2 5.55 MINI GRINDER KW0701036 KW0701037 Include : Flexible Shaft (KW071036) Optional Accessories: KW0701038 KW0701039 KW0701279 KW0701036 KW0701037 Mini Grinder with Mini Grinder with Accessories 227pcs Accessories 172pcs Collect Chuck Diameter (mm) 1.5, 2.5, 3 Input Power (W / V / Hz) 130 / 220 / 50 No. Load Speed (rpm) 8000 ~ 30000 Dimension L x W x H (cm) 35 x 22 x 7 24 x 5 x 9 Weight (kg) 0.7 KW0701038 Rotary Tool Set KW0701039 Rotary Tool Set KW0701279 Flexible Shaft 3
GRINDER DIE GRINDER KW0700845 Die Grinder 6mm, 400W Collet Bore of Collet Chuck (mm) 6 Input Power (W / V / Hz) 400 / 220 / 50 No. Load Speed (rpm) 27000 Dimension L x W x H (cm) 44 x 10.5 x 11.5 Weight (kg) 2 FLEXIBLE SHAFT GRINDER Optional Accessories: KW0700968 KW0700969 KW0700974 Max Chuck (mm) 4 Input Power (W / V / Hz) 250 / 220 / 50 No. Load Speed (rpm) 24000 Stepless Variable Speed Range (rpm) 500 ~ 22000 Dimension L x W x H (cm) 48 x 11 x 31.5 Weight (kg) 1.6 KW0700968 KW0700969 KW0700974 Hand Piece Capacity 6mm, 3mm, 2.38mm Hand Piece Capacity 3mm, 2.38mm Hand Piece Capacity 4mm (Drill Chuck Model) KW0700942 Professional Hanging Flexible Shaft Grinder STRAIGHT GRINDER BENCH GRINDER KW0700856 Straight Grinder 125mm, 710W Max. Wheel Diameter (mm) 125 Hole Diameter Of Wheel (mm) 20 Input Power (W / V / Hz) 710 / 220 / 50 No. Load Speed (rpm) 5300 Dimension L x W x H (cm) 40 x 14.5 x 14.5 Weight (kg) 2.3 KW0700073 KW0700076 KW0700076 Stand for Grinder KW0700073 KW0700074 KW0700075 Bench Grinder 6 Bench Grinder 8 Bench Grinder 10 Wheel Size (inch) Ø6 x 1 Ø8 x 3/4 Ø10 x 1 Shaft Dia. (inch) 1/2 5/8 3/4 Input Power (HP / V / Hz) 1/2 / 220 / 50 1/2 / 220 / 50 1 / 220 / 50 No. Load Speed (rpm) 2850 Lamp Yes Wheel Dressing Tool Yes Cast Iron Base No Yes Dimension L x W x H (cm) 34.5 x 20.5 x 26 40 x 28 x 30 45 x 30.5 x 32.5 Weight (kg) 10.5 14.5 18 10047425 10047426 10047427 10047425 10047426 10047427 Grinder & Sander 6 & 2 x 27 Dry & Wet Bench Grinder 6 & 8 (KW0701789) (KW0701790) Utility Sharpener 4.5 x 1.5 (KW0701791) Wheel Size (inch) 6 x 3/4 x 1/2 8 x 1 1/2 x 3/4 & 6 x 3/4 x 1/2 4 1/2 x 1 1/2 x 9/16 Belt Size (inch) 2 x 27 - Input Power (W / V / Hz) 250 / 220 / 50 70 / 220 / 50 No. Load Speed (rpm) 2850 140 Belt Sander Speed (m/s) 15 - Dimension L x W x H (cm) 44.5 x 39.5 x 24.5 48.5 x 33 x 36.5 39.5 x 23.5 x 19.5 Weight (kg) 10.5 13.5 5 4
GRINDER and SCREWDRIVER BENCH GRINDER KW0700939 ELECTRIC SCREWDRIVER KW0700940 KW0700939 KW0700940 Bench Grinder with Bench Polisher with Flexible Shaft Long Shaft Wheel Size (mm) Ø75 x 13 x Ø12.7 Ø200 x 14 x Ø15.9 Input Power (W / V / Hz) 75 / 220 / 50 375 / 220 / 50 No. Load Speed (rpm) 2850 Dimension L x W x H (cm) 16 x 13 x 15 58 x 20 x 24.5 Weight (kg) 2.05 10 Optional Accessories: KW0701240/KW0701239 KW0701243/KW0701244 KW0701241/KW0701242 ESD Electrostatic Discharge ESD Electrostatic Discharge KW0701240 KW0701239 KW0701243 KW0701244 KW0701241 KW0701242 Electric Screwdriver Electric Screwdriver Electric Screwdriver Electric Screwdriver Electric Screwdriver Electric Screwdriver 2-12 kgf.cm with 4-20 kgf.cm with 1.0-6.0 kgf.cm with 1.5-10 kgf.cm with 2-16 kgf.cm 5-25 kgf.cm ESD Pushdown ESD Pushdown ESD Lever Type ESD Lever Type Type Type Torque Force Range (kgf.cm) 2.0-16 5.0 25 1.0-6.0 1.5-10 2.0 12 4.0 20 Applicable Head of Screwdriver Ø5, SH5 Ø4, Ø5, SH1/4 Ø5, SH1/4 Applicable Thread Dia. Of Machine & Tapping Screw (mm) 3.5 5.5 / 2.6 4.5 4.0 6.0 / 3.0 5.0 1.4 2.6 / 1.4 2.2 2.2 3.0 / 2.0 2.5 2.0 3.0 / 1.8 2.6 2.4 4.0 / 2.0 3.0 Power Supply Type PRO-3N PRO-3 PRO-6 Power Supply Input Voltage (AC) / Output Voltage (DCV) 100-240 / 30 100-240 / 20-30 100-240 / 20-30 No. Load Speed (rpm) 950 750 700-1000 700-1000 Dimension L x W x H (cm) 22 x 4 x 4.5 22 x 4 x 4.5 22 x 4 x 4.5 Weight (kg) 1.2 1.2 1.4 KW0701236 Spring Balancer 1-2kg / 2m CORDLESS SCREWDRIVER Li-ion Tech. KW0701602 KW0701678 Features : 2 position twist handle mechanism for full versality and accessibility Different head technology for multiple application, screwdriver head and scissors head (KW0701678) KW0701602 KW0701603 KW0701678 Cordless Screwdriver 3.6V Lithium - Ion Cordless Screwdriver 3.6V Lithium - Ion Cordless Screwdriver 3.6V Lithium - Ion Battery with Pouch Battery with BMC Battery with Attachment Spesification Head of Screwdriver (mm) 6.35 Input Voltage (DCV) DC 3.6V No. Load Speed (rpm) 0 ~ 200 Dimension L x W x H (cm) 18 x 5 x 15/5 Weight (kg) 0.43 5
AUTO FEEDING SCREW MACHINE, IMPACT WRENCH, POLISHER and SANDER AUTO FEEDING SCREW MACHINE Applicable Screw KW0701238 Diameter of Screw Thread M1.0 ~ M5.0 Type of Screw Head Material of Screw Head Max. Length of Screw (mm) Auto Feeding Screw Machine M1.0 ~ 5.0 JLS : dish-shape head, tightened, pressure, UH spreding on head (countersunk head or oval countersunk head) with or without gasket JCIS : type 1, 2, 3 and 4 dish-shape head Iron or materials magnetic to magnet 20mm Input Power (ACV) (W/V/Hz) 180/ 220/ 55 Dimension L x W x H (cm) 18.5 x 13 x 14.5 Weight (kg) 2.5 CORDLESS IMPACT WRENCH KW0701230 Cordless Impact Wrench 1/2 Square Drive (mch) 1/2 Input Voltage (DCV) DC 24V No. Load Speed (rpm) 2000 Impact (bpm) 2600 Max. Torque (N.m) 450 Dimension L x W x H (cm) 16 x 7 x 22 Weight (kg) 4 POLISHER KW0700655 KW0700852 Special Function Standard Accessories: 1pc auxiliary handle 1pc polishing pad 1pc wool felt KW0700655 KW0700803 KW0700852 Angle Polisher Angle Polisher Sander Polisher 125mm 600W 180mm 1300W 180mm, 570W Pad Size (mm) 125 180 Input Power (W / V / Hz) 600 / 220 / 50 1300 / 220 / 50 570 / 220 / 50 No. Load Speed (rpm) 1200 ~ 5000 600 ~ 3000 1000 ~ 2400 Dimension L x W x H (cm) 26 x 8.5 x 20.5 45 x 9.5 x 12 22.5 x 10 x 24 Weight (kg) 2 3.35 2.8 WOOL POLISHING PAD KW0700966 KW0700967 Dimension (inch) Weight (kg) KW0700966 Wool Buffing Pad 5 0.15 KW0700967 Wool Buffing Pad 7.5 0.20 SANDER and PALM SANDER KW0700846 KW0700862 KW0700846 KW0700862 Sander Palm Sander 93 x 185mm, 160W 100 x 110mm, 150W Pad Size (mm) 93 x 185 100 x 110 Input Power (W / V / Hz) 160 / 220 / 50 150 / 220 / 50 Orbital Frequency (rpm) 10000 12000 Dimension L x W x H (cm) 23.5 x 9 x 15 11.5 x 11 x 13 Weight (kg) 1.8 1.35 6
SANDER BELT SANDER BELT SANDER KW0701007 Belt Sander 533 x 76mm, 810W Sanding Belt Size (mm) 533 x 76 Input Power (W / V / Hz) 810 / 220 / 50 No. Load Speed (m/min) 200 ~ 380 Dimension L x W x H (cm) 31.5 x 15 x 16 Weight (kg) 3.3 10047424 Belt & Disc Sander 4 x 36 & 6 (KW0701788) Belt Size (inch) 4 x 36 Disc Diameter (inch) 6 Table Size (mm) 220 x 160 Table Tilt ( ) 0 ~ 45 Input Power (W / V / Hz) 370 / 220 / 50 No. Load Speed (rpm) 2850 Belt Sander Speed (m/s) 7.35 Dimension L x W x H (cm) 56.5 x 28 x 33 Weight (kg) 18.8 ELECTRIC DRYWALL SANDER KW0701782 KW0701783 Standard Accessories: Standard Accessories: Features KW0701782: Extend the length by turning the screw nut Able to joined with dust vacuum cleaner unit KW0701782 Electric Drywall Sander 600W, 225mm with Handle Sanding Pad Diameter (mm) 215 Sanding Paper Diameter (mm) 225 Input Power (W / V / Hz) 600 / 220 / 50 No. Load Speed (rpm) 0 ~ 1000 Tube Diameter (mm) 32 Short-length without additional tube (mm) 1230/ 1650 Long-length with additional tube (mm) 2200 Dimension L x W x H (cm) 71.5 x 22.5 x 26 Weight (kg) 5.2 Features KW0701783: Flexible sanding for convenient operation on non-smooth wall Self vacuum system Available: KW0300314 Sandpaper 60# 225mm KW0300315 Sandpaper 120# 225mm KW0300316 Sandpaper 180# 225mm KW0701783 Electric Drywall Sander 1220W, 225mm Sanding Pad Diameter (mm) 215 Sanding Paper Diameter (mm) 225 Input Power (W / V / Hz) 1220 / 220 / 50 No. Load Speed (rpm) 1500 ~ 2300 Tube Diameter (mm) 32 Dimension L x W x H (cm) 29 x 33 x 25 Weight (Kg) 3.05 7
SANDER and SAW DRUM SANDER and POLISHER Speed control thumb wheel Standard Accessories: Hard shell case KW0700791 Drum Sander and Polisher Machine 110mm, 1200W Maximum Wheel Diameter (mm) 100 Maximum Wheel Width (mm) 100 Arbor 19mm double key x 100mm long Input Power (W / V / Hz) 1200 / 220 / 50 No. Load Speed (rpm) 1000 ~ 2400 Dimension L x W x H (cm) 40 x 22 x 18 Weight (kg) 4.8 Inflatable Rubber Sanding Drum Inflatable Rubber Sanding Drum (KW0700820) Air Pump (KW0700986) Surface Conditioning Sleeve (100 x 292mm) (KW0700821) Sandpaper Sleeve #60 (KW0700822) Sandpaper Sleeve #100 (KW0700823) Sandpaper Sleeve #180 (KW0700824) Drive Pulley for Belt Drive Pulley for Belt (KW0700825) Surface Conditioning Sleeve (40 x 600mm) (KW0700826) Sandpaper Belt # 120 Grift (2pcs) (KW0700827) Hook and Loop Belt Closing Straps (2pcs) (KW0700828) Surface Conditioning Flap Wheel Surface Conditioning Flap Wheel (105 x 100 x 19mm) (KW0700829) Arbor Spacer Discs (40 x 19 x 5mm) (KW07001753) BELT SANDER and POLISHER Speed control thumb wheel Lock button Trigger switch Standard Accessories: Hard Shell Case (572 x 362 x 238mm) Surface Conditioning Belt (40 x 760mm) (KW0700838) Sandpaper Belt #120 Grift (20 x 760mm) 10pcs (KW0700839) Sandpaper Belt #220 Grift (20 x 760mm) 10pcs (KW0700840) KW0700792 Belt Sander and Polisher 40 x 760mm, 1200W Maximum Belt Length (mm) 760 Maximum Belt Width (mm) 40 Input Power (W / V / Hz) 1200 / 220 / 50 No. Load Speed (rpm & m/s) 1600 ~ 3200 (Rotation) & 3 ~ 12 (Surface) Dimension L x W x H (cm) 52.5 x 28 x 14 Weight (kg) 3.4 JIG SAW KW0700999 KW0700855 KW0700999 KW0700855 Jig Saw 65mm, 570W Jig Saw 85mm, 580W Max Cutting Depth Wood (mm) 65 85 Max Cutting Depth Steel (mm) 8 10 No. Load Speed (spm) 500 3000 500 3100 Input Power (W / V / Hz) 570 / 220 / 50 580 / 220 / 50 Dimension L x W x H (cm) 21.5 x 8 x 20.5 26 x 8.5 x 20.5 Weight (kg) 2 2.7 CIRCULAR SAW KW0700337 Adjustable lever for cutting angle 45 Ergonomic front handle for comfortable use KW0700336 Laser Lining Adjustable lever for cutting angle 45 Ergonomic front handle for comfortable use KW0700337 KW0700336 Circular Saw Circular Saw 185mm,1500W 140mm,800W with Laser Light Blade Size (mm) 5½ (140) 7¼ (185) Max Cutting Depth 90 (mm) 40 63 Max Cutting Depth 45 (mm) 28 43 Input Power (W / V / Hz) 800 / 220 / 50 1500 / 220 / 50 No. Load Speed (rpm) 4500 4800 Dimension L x W x H (cm) 29 x 24 x 22.5 35.5 x 26 x 25 Weight (kg) 3.65 5.8 8
SAW MINI PLUNGE SAW OPTIONAL MINI PLUNGE SAW ACCESSORIES Standard Accessories: 1pc diamond blade 89mm 1pc HSS blade 89mm 1pc TCT blade 89mm 1pc guide fence 1pc dust extraction hose 1pc inner hexagon wrench 10033099 Mini Plunge Saw 89mm Blade Size (mm) 89 Max. Cutting Depth Soft Wood / Tile / Aluminium (mm) 28.5 / 8 / 3 Power (W / V / Hz) 600 / 220 / 50 No. Load Speed (rpm) 5500 Dimension L x W x H (cm) 40 x 10 x 13 Weight (kg) 3.2 10041896 10041897 10041898 10041899 10041896 Mitre Base for Mini Plunge Saw 89mm 10041897 Diamond Saw Blade 89mm 10041898 HSS Saw Blade 89mm 10041899 TCT Saw Blade 89mm MITER SAW KW0701004 KW0701005 KW0701004 KW0701005 Miter Saw Ø 255, 1800W with Laser Light 2 Function Miter Saw Ø 254, 1800W Blade Diameter (mm) Ø 255 Ø 254 Max Cutting Capacity (mm) 0 x 90 H75 x W300 0 x 90 H70 x W110 45 x 90 H75 x W210 45 x 90 H70 x W70 0 x 45 H40 x W300 0 x 45 H40 x W110 45 x 45 H40 x W210 45 (L)x 45 H35 x W60-45 (R)x 45 H40 x W90 Input Power (W / V / Hz) 1800 / 220 / 50 No. Load Speed (rpm) 4800 5000 Dimension L x W x H (cm) 69 x 60 x 41.5 Weight (kg) 17 19 RECIPROCATING SAW KW0700805 Quick-release pipe vise for smaller diameters Blade not included Chain vise for larger diameters KW0700804 Reciprocating Saw Straight Type Handle, 1500W Stroke (mm/inch) 26/1 Input Power (W / V / Hz) 1500 / 220 / 50 No. Load Speed (rpm) 1000 ~ 2200 Insulation Double Insulation Class II Dimension L x W x H (cm) 52.5 x 16 x 11 Weight (kg) 5.2 Optional Accessories: 2 in 1 Vise (KW0700805) A world first: a 2 in 1 pipe vise. on side there is a Chain Clamp for 1/2 up to 6 pipes. On the other side is a Quick Release pipe vise. For pipe cutting, the vise gives 4 times the leverage and a perfect 90 o cut KW0700805 2 in 1 Vise for KW0700804 9
CUTTER CUT OFF MACHINE 10003890 10003965 10003890 10003965 Cut Off Machine 16, 2200W, 3Phase Cut Off Machine 14 2300W Wheel Diameter (mm) 400 x 3 x 25.4 350 x 3 x 25.4 Input Power (W / V / Hz) 2200 / 380 / 50 2300 / 220 / 50 No. Load Speed (rpm) 2900 3500 Dimensions L x W x H (cm) 84 x 46 x 58 50 x 32 x 41 Weight (kg) 86 16 MARBLE CUTTER ELECTRIC TILE CUTTER KW0701676 ELECTRIC PUNCHING CUTTER ELECTRIC PUNCHING CUTTER * Blade not include Optional Accessories KW0701677 Blade Diameter (mm) 110 Max. Cutting Capacity (mm) 34 KW0700861 Marble Cutter 110mm, 1050W Input Power (W / V / Hz) 1050 / 220 / 50 No. Load Speed (rpm) 13300 Dimension L x W x H (cm) 22 x 21 x 18 Weight (kg) 3 Spesification KW0701677 KW0701676 Diamond Wheel Diameter (mm) Ø180 x 22.2 Max. Cutt Off (mm) 32 Electric Tile Cutter 720W Input Power (W / V / Hz) 720 / 220 / 50 No. Load Speed (rpm) 2980 Dimension LxWxH (cm) 40 x 40 x 30 Weight (kg) 15.8 Diamond Blade Ø180 x 22.2 mm KW0701691 Electric Punching Cutter 1.8mm (Doublehead) Cutting Capacity Sheet Steel/Iron Plate (mm) 1.8 Stainless Steel (mm) 1 Aluminum (mm) 1.8 Copper (mm) 1.8 Plastics (mm) 1.8 Minimum Cutting Dia. (mm) 200 Input Power (W / V / Hz) 380 / 220 / 50 No. Load Speed (rpm) 1700 Dimension L x W x H (cm) 28 x 7 x 15.5 Weight (kg) 1.85 KW0700320 KW0700323 To be used with electric drill (optional) KW0700320 KW0700321 KW0700323 Electric Punching Electric Punching Double Head Cutter Cutter 2.3mm Cutter 3mm YT - 160 Cutting Capacity Sheet Steel/Iron Plate (mm) 2.3 3 2 Stainless Steel (mm) 1.6 1.8 1.2 Aluminum (mm) 2.3 3 2 Copper (mm) 2.3 3 2 Plastics (mm) 4 2.3 2 Minimum Cutting Dia. (mm) 250 200 Input Power (W / V / Hz) 500 / 220 / 50 - No. Load Speed (rpm) 1000 1500 Dimension L x W x H (cm) 31 x 9 x 20.5 15 x 5.5 x 8 Weight (kg) 3.5 0.38 10
ROUTER, PLANNER, HEAT GUN, BLOWER and ELECTRIC MIXER ROUTER and PLANNER KW0701006 HEAT GUN KW0700859-KW0700860 BLOWER KW0701010 KW0701006 KW0701010 Planner 82 x 3mm, 900W Router 1/4 & 8mm, 1200W Max. Planing Width & Depth (mm) 82 & 3 - Collet Diameter (inch&mm) - 1/4 & 8 Input Power (W / V / Hz) 900 / 220 / 50 1200 / 220 / 50 No. Load Speed (rpm) 16000 28000 Dimension L x W x H (cm) 31 x 16 x 18.5 29.5 x 14.5 x 25.5 Weight (kg) 3.1 3.5 KW0700859 KW0700860 Heat Gun 1600W Heat Gun 2000W Low & High Temperature ( C) 50 ~ 400 & 50 ~ 550 50 ~ 480 & 50 ~ 600 Low & High Temperature Air Flow (L/min) 190 ~ 210 & 310 ~ 350 210 ~ 250 & 340 ~ 380 Input Power (W / V / Hz) 1600 / 220 / 50 2000 / 220 / 50 Dimension LxWxH (cm) 24.5 x 7 x 19 Weight (kg) 0.7 0.9 KW0700591 KW0701019 Electric Blower 400W Electric Blower 650W KW07001019 ELECTRIC MIXER KW0700591 Input Power (W / V / Hz) 400 / 220 / 50 650 / 220 / 50 No. Load Speed (rpm) 16000 0 ~ 15000 Variable Speed No Yes Dimension L x W x H (cm) 24 x 17.5 x 20.5 37 x 19.5 x 22 Weight (kg) 1 2.4 KW0700570 STAND ELECTRIC MIXER KW07001595 KW0700570 KW0701595 Electric Mixer Electric Mixer 120mm, 1220W 160mm, 1600W Mixing Paddle (mm) 120 160 Tool Fitting (mm) 14 x 2 Input Power (W / V / Hz) 1220 / 220 / 50 1600 / 220 / 50 No. Load Speed (rpm) 0 ~ 800 180 ~ 460/300 ~ 700 Dimension L x W x H (cm) 30 x 16.5 x 29 44 x 25 x 95 Weight (kg) 3.1 5.75 Note : * Mixer Not Included Diameter of Bottom Disc (mm) 400 Material Steel Finishing KW0701596 Stand for electric mixer KW0700570/ KW07001595 Polyamide (PA) and steel pipe Powder Coated Dimension L x W x H (cm) 60 x 40 x 74.5 Weight (kg) 7 11
ELECTRIC MIXER, GLUE GUN, ELECTRIC STAPLER and ELECTRIC ENGRAVER MIXER PADDLE KW0701597 KW0701598/1600 KW0701599 KW0701597 KW0701600 KW0701598 KW0701599 Mixer Paddle 120 x 600 Mixer Paddle Mixer Paddle Mixer Paddle M14 x 2, 120 x 600 160 x 600 120 x 600 for sticky and M14 x 2, M14 x 2, M14 x 2, viscous materials for Liquid for Liquid for Dry Mixtures Diameter (cm) 12 16 12 Length (cm) 60 Tool Fitting M14 x 2 User for Optimal for mixing sticky and viscous materials, e.g. tile adhesive, bonding mortar, joint compound, ready-mixed plaster, floor screed, fillers, etc. Optimal for liquid or fibrous materials in large quantities : e.g. wall paint, varnish, glaze, joint sealing compound, lime, plaster, filler, floor screed, etc. It is perfect for dry mixtures such as mortar, plaster, cement, sand- and pebble-filled materials. The mixing tool works into the mixing material easily. GLUE GUN KW0701637 KW0701638 Glue Gun 60 W Glue Gun 30 W with 2 Glue Stick with 6 Glue Stick Input Power (W / V / Hz) 60 / 220 / 50 30 / 220 / 50 Dimension L x W x H (cm) 18 x 3.5 x 16.5 16 x 3.5 x 15 Weight (g) 0.35 0.3 KW0701637 KW0701638 KW0701639 KW0701639 Glue Stick 11 x 100 mm (10Pcs/Pack) ELECTRIC STAPLER and NAILER ELECTRIC ENGRAVER KW0701703 Stapler for KW0701703 : FS-1318 FS-1403 FS-1393 Brad Nailer for KW0701703 : FS-1405 KW0701703 Electric Stapler and Nailer 15 and 32mm, 700W Crown (mm) 5.2 Shank Thickness 0.6 (mm) Stapler Shank Width (mm) 1.2 Length (mm) 15-25 Fastener Gauge 20 Head (mm) 1.9 Thickness (mm) 1 Nailer Width (mm) 1.25 Length (mm) 15/20/25/32 Nail Type Brad Gauge 18 Input Power (W / V / Hz) 700 (Average) / 220 / 50 Dimension L x W x H (cm) 26.5 x 7 x 21.5 Weight (kg) 1.4 KW0700726 KW0700726 Electric Engraver 20W Input Power (W / V / Hz) 20 / 220 / 50 Dimension L x W x H (cm) 36 x 7.5 x 25 Weight (kg) 0.3 SYMBOL: SDS Plus Chuck Lock of a Shaft Speed Control Double Insulation KLS/P&A.341/10K/KW82/can.gun/10.15 12