LIVE ONSITE & WEBCAST AUCTION COMPLETE PLANT CLOSURE OF STEEL BEAM AND STRUCTURAL STEEL MANUFACTURING COMPANY By Order of the Court Appointed Receiver The Audette Group LLC 11 Helmsman Avenue, North Kingstown, RI Sale Date: Thursday, March 20th, 2014, 10:30 AM (ET) Inspection: Wednesday, March 19th, (10 am to 4 pm) $400K Invested in Refurbished with CNC Control Automatic Feed FAGOR CNC Control Peddinghaus Beam Drilling/Cutting/Coping Line FICEP Hyd. CNC Angle/Punch Line Cost $200K 2013 2000 Great Opportunity to Purchase a Like System ESAB # Sabre DXG-4500 CNC Cutting System GEKA #110-A Hyd. Ironworker Sale under Management of: Thomas Industries, Inc. 2414 Boston Post Road, Guilford, CT 06437-2310 Phone (203) 458-0709 Fax (203) 458-0727 email: gavel@thomasauction.com www.thomasauction.com
LIVE ONSITE & WEBCAST AUCTION: THURSDAY MARCH 20TH, 10:30 AM (ET) PEDDINGHAUS CNC BEAM DRILLING/CUTTING & COPING LINE Peddinghaus Beam Drilling/Cutting/Coping Line Refurbished Consisting Of: Peddinghaus TDK1000/9E 9 Spindle Beam Drill, S/N 4756977089001, 3 Drill Heads, 3 Spindles Each Axis, 6.5 Kw Each. 1 Vertical, 2 Opposed Horizontal Heads, 36 Beam Capacity; Peddinghaus LC-1000 Peddinghaus Auto Coping, Drilling And Cutting, Abcm 1250/3A, S/N ABC202, 36 Beam Capacity, Oxy Fuel, Hydraulic Hold Downs, 7.5 Hp, Hydraulic FAGOR CNC Control Motor, Fagor Control Data Input With Acer Pc (Refurbished in by Maple Machine) Automatic Hydraulic Beam Feed Table (In- Feed And Off Feed To The Peddinghaus Beam Drill/Cutting & Coping Line), 2-Double Sections (4 Total) Approximately 60' Each, 42" Roller, 16" On Centers, Chain Drive, 10-Chain Driven Beam Cross Transfer Units Approximately 40', 10 Hp Hydraulic Unit, 4 Pedestal Control Boxes (Refurbished In By Controlled Automation) Cost $200K 2013 2000 Great Opportunity to Purchase a Like System ESAB # Sabre DXG-4500 CNC Cutting System GEKA #110-A Hyd. Ironworker 2 DRILLING & CUTTING LINES CNC CUTTING SYSTEMS WELDING EQUIPMENT
INSPECTION: WEDNESDAY, MARCH 19TH, 9 AM TO 4 PM View of Punch FICEP CNC Hydraulic Angle Punch & Shear Line ANGLE/PUNCH LINE FICEP 72 Ton Hyd. Angle/ Punch w/fagor Control, 6"x 6"x 5/8" Precision Shearing & Punch Capacity, FICEP Hydraulic Feed W/ 32 V Roller Feed Table & Semi- Automatic Beam Loader Automatic Feed Marvel Vertical Tilt Frame Band Saw Series 8 Mark II 1 of 2 Marvel Hydraulic Horizontal Band Saw, 15A4/M1 1 of 2 1 of 3 Miller Trailblazer Gasoline Powered Arc Welder Miller XMT450 CC/CV Welder Miller Series 70 Wire Feeder Esab Power Cut 900 Plasma Cutter CNC GANTRY TYPE PLASMA CUTTING SYSTEM ( 2013) Esab 3 Axis CNC Cutting System # Sabre DXG-4500,Esab Vision T-5 CNC Control, 3 Cutting Heads, Esab Plasma 360 Amp Plasmarc System, Esab CC-11 Chiller, 12 X 20 Tank Size, Cutting Capacity 128" L-R x 234" Long, Texa Cooling Unit, S/N 0560953098 IRON WORKERS / PUNCHES Geka Hydraulic Ironworker Hydrocrop 110/A, S/N 18191, 2 Round, 24 X 5/8 Flat, 6.5 X 6.5 X 1/2" Angle Iron Nitto Double Acting Hydraulic Punch Hss11-1624, 52 Ton, 10,000 PSI SAWS Marvel Vertical Tilt Frame Band Saw Series 8 Mark II, S/N 830096, 18 X 22 Capacity, 30 Roller Feed Table Marvel Automatic Horizontal Band Saw, 15A4/M1, S/N E-151067, 20 X 15 Capacity, 30 X 20 Wide Roller Table Kalmazoo Chop Saw C315/350, S/N 070374003, 14 Blade, 4 Max Cap. PLASMA CUTTER Esab Power Cut 900 Plasma Cutter S/N 1126589 DRILLING & CUTTING LINES CNC CUTTING SYSTEMS WELDING EQUIPMENT 3
LIVE WEBCAST BIDDING WWW.BIDSPOTTER.COM 44 Reach Portable Acetylene Torch Carts Several Available Ridgid Job Boxes 2005 Terex #TH-844C "Turbo" Telescopic Reach Forklift 1 of 3 View of Crane Components View of Steel Inventory North American Industries Single Girder 10-Ton Bridge Crane W/ HYPERTHERM # POWERMAX Plasma Cutting System 5,000 lb. Capacity Like Powermax Plasma Cutting Table Yale LPG Lift Truck Campbell Hausfeld Vertical Tank Air Compressor DP5810-Q WELDERS Lincoln GX-300 Gasoline Powered Arc Welder, Code 11120, S/N U1040717498, 300 Amp, Lincoln GX-300 Gasoline Powered Arc Welder, Code 11120, S/N X0040400299, 300 Amp, Miller Trailblazer Gasoline Powered Arc Welder, Stock #907217, S/N LJ280034Q, 300 Amp Lincoln Power Mig 350 Mp Welder, Code 11147, S/N U1110907124, 350 Amp Miller XMT-450 CC/CV Welder, Stock #207481, S/N Mc410004u, 450 Amp, Miller 70 Series Wire Feed Miller XMT-450 CC/CV Welder, Stock 207481, 450 Amp, Miller 70 Series Wire Feed Miller CST Stick Welder, Code 907244, S/N MA170167G 4 COMPLETE LOT CATALOG & BIDDING WWW.THOMASAUCTION.COM
REGISTER & BID AT WWW.THOMASAUCTION.COM 2006 V8 Diesel 2008 Ford F-450 Dump Body Truck Toyota Tacoma Pickup Canon Image Printer IPF655 2013 FAGOR CNC Control Cost $200K Cutting Cap. 128"x 234" ESAB # Sabre DXG-4500 CNC Cutting System View of ESAB Plasma Cutting Unit & Chiller Close up View of Peddinghaus Great Opportunity to Purchase a Like System AIR COMPRESSORS Quincy 15 Hp Rotary Screw Air Compressor, Auto-dual Control Campbell Hausfeld Vertical Tank Air Compressor, #DP-5810Q Zeks Heat Sink Dryer #50-HFA, S/N 537553-1 (1) Air Receiving Tank View of Peddinghaus CNC Beam System Computers & Office Equipment Available FORKLIFTS ( 2005) Terex Turbo # TH-844C Reach Type Forklift, 8,000 Lb. Capacity, 44 Lift, 27 Reach, Deere 4 Cyl. Turbo Diesel Engine, S/N 057127 Yale LPG Lift Truck GLP050RGNU- AE090, S/N A875B05056W, 4,000 Lb Cap. 200 Lift Height, Tri-Mast, Side Shift, Solid Tires TRUCKS ( 2006) Ford F-450 XL-Super Duty Dump Body Truck w/ "Power-Stroke" V-8 Diesel Engine Vin# 1FDXF46F22EA65787 ( 2008) Toyota Tacoma Pickup Vin# 5TEUX42N88Z567596 PLANT SUPPORT Miscellaneous Support Equipment Located Throughout The Facility: Heavy Duty Flange Mounted Punches, Stock Racks, Acetelyne Carts, Strapping Unit, Propane Heaters, Magnetic Base Drills (3) North American Industries Single Girder, 10 Ton Underhung Motorized Trolleys, 80 Span, (2) 40 Bolt Tog Sections Office Furniture and Equipment: Executive Furniture, Dell Power Edge Server, Canon Image Printer IPF655, Brother All-In One Office Center, Desktop PC s, etc. LIVE ONSITE & WEBCAST AUCTION: THURSDAY MARCH 20TH, 10:30 AM (ET) 5
Under Management of: THOMAS INDUSTRIES 2414 Boston Post Road Guilford, CT 06437-2310 (203) 458-0709 (203) 458-0727 Fax http://www.thomasauction.com LIVE ONSITE & WEBCAST AUCTION By Order of the Court Appointed Receiver The Audette Group LLC 11 Helmsman Avenue, North Kingstown, RI 02852 PRESORTED FIRST CLASS MAIL U.S. POSTAGE PAID Permit No. 80 Milford, CT FORWARDING SERVICE REQUESTED Sale Date: Thursday, MARCH 20th, 2014, 10:30 AM (ET) Inspection: Wednesday, March 19th, (10 am to 4 pm) COMPLETE LOT CATALOG & PHOTOS AT WWW.THOMASAUCTION.COM COMPLETE PLANT CLOSURE OF STEEL BEAM AND STRUCTURAL STEEL MANUFACTURING COMPANY By Order of the Court Appointed Receiver The Audette Group LLC 11 Helmsman Avenue, North Kingstown, RI 02852 Sale Date: Thursday, MARCH 20th, 10:30 AM (ET) Inspection: Wednesday, March 19th, (10 am to 4 pm) Buyer's Premium: 10% Onsite & 13% Webcast Payment Due In Full: Friday, March 21, 2014 Payment Types: Cash, Certified Check or Wire Transfer Removal: Final Date For Removal is Friday, March 28, 2014 AUCTION INFORMATION ONSITE REGISTRATION Onsite registration is on the morning of the sale. In order to obtain a bid paddle a $100 refundable fee is due at time of registration. LIVE WEBCAST BIDDING AVAILABLE: FOR ADDITIONAL INFO CONTACT: TECHNICAL INFORMATION Tom DeCosmo (413) 478-0030 PAYMENT INFORMATION Irina Lekhmus (203) 458-0709 X108 ONSITE INFORMATION Jon Standish (203) 915-3430 Under Management of: THOMAS INDUSTRIES 2414 Boston Post Road Guilford, CT 06437-2310 (203) 458-0709 (203) 458-0727 Fax http://www.thomasauction.com Marvel Vertical Tilt Frame Band Saw Series 8 Mark II 2005 Terex Turbo Telescopic Reach Forklift TH844C