ONLINE AUCTION Assets from Asphalt Recycling Company Surplus Bridge Cranes, Horizontal Boring Mills & More By Order of Secured Lender: ASPHALT RECYCLING SOLUTIONS Assets located in South Dakota, North Dakota and Nebraska (call 224-927-5320 for specific addresses) BID ONLINE: Now through Wednesday, April 22 at 1:00pm Cold Planing Machines Trucks Cutting Head Trailer Trailers Travel Trailer Shop Equipment Repair Parts & Components Auction Closing Date Wed., April 22 1:00 pm 2006 BID ONLINE ONLY 2004 18% Online Buyer s Premium Applies NOTE TO BIDDERS: Some equipment is disassembled or incomplete. Buyers are strongly advised to inspect before buying. 105 Revere Drive, Suite C Northbrook, Illinois 60062 sales@pplauction.com 3901 Kraus Lane Hamilton, OH 45014 513.738.3311 www.myronbowling.com PPL License No. 444.000322 David Muslin License No. 441.001650 Joel Bersh License No. 441.000826 Michael L. Ackerman License No. 440.000539
PLACE BIDS ONLINE ONLY COLD PLANING MACHINES Caterpillar Self Propelled Diesel Cold Planing Modified to Reclaimer Machine Model PR-1200 (Dickinson, ND) CMI Self Propelled Diesel Cold Planing Machine Model PR-1200, S/N 532-105 (1995), with Gator Crusher (Rapid City, SD) CMI Self Propelled 14 Up or Down Diesel Cold Planing Machine Model PR-1200, S/N 532-103 (1992) (12 mi. east of Town, ND) CMI Self Propelled Diesel Rubber Tire Cold Planing Machine Model RS-800, S/N 553-109 (Stanley, ND) CMI Self Propelled Diesel Cold Planing Machine Model PR-800-7, S/N 536-113 (1991), CAT 3412 Diesel (Rapid City, SD) Easy Miner Self Propelled Diesel Cold Planing Machine Model 100/475 (no engine) (Williston, ND) CMI Self Propelled 12 Diesel Cold Planing Machine Model PR-1200 FL, S/N 532-102, with Conveyor (12 mi. east of Town, ND) PPL Auction
NOTICE TO ALL BIDDERS: UCC sale assets represent repossessed goods which secured party has neither inspected, repaired nor has any expertise in evaluating its physical condition. The UCC sale assets are being sold as is, where is as defined by the UCC. Secured party disclaims any implied warranties of merchantability and fitness for a particular purpose and all warranties express or implied are excluded from this transaction. Secured party acknowledges that there are no warranties whatsoever regarding the UCC sale assets or components contained therein, except as may be required under applicable state law; and each purchaser at the auction accepts the entire risk as to quality and performance of the UCC sale assets and has relied upon its own judgment and inspection in determining that the UCC sale assets are of acceptable quality and are suitable for purchaser s particular needs. PLACE BIDS ONLINE ONLY CUTTING HEAD TRAILER 1991 CMI Special Purpose 3-Axle Heavy Duty Low Boy Trailer Model 51799, S/N 532102, for transporting CMI Planer Cutting Head, with Hydraulic Elevation (Sioux Falls, SD) PPL Auction
2006 2006 2003 TRUCKS International 4x2 Single-Axle Mechanic s Truck Model 4300 SBA, VIN 1HTMMAANX5H138758, with Navistar/International Diesel Engine, Auto Crane Service Body, Lincoln Ranger 305G Gas Powered AC/DC Welder, I-R Gas Powered Air Compressor with Hose Reel, Diesel Fuel Transfer Tank & Auto Crane Electric Hoist (Unit 388) (Sioux Falls, SD) 2006 Chevrolet 4x2 Single-Axle Mechanic s Truck Model C-5500, VIN 1GBE5C1236F401173, with Duramax Diesel Engine, Dakota Service Body, Lincoln Ranger 305G Welder, I-R Gas Powered Air Compressor with Hose Reel & Auto Crane Electric Hoist (Unit 386) (Sioux Falls, SD) 2006 Chevrolet 4x2 Single-Axle Mechanic s Truck Model C-5500, VIN 1GBE5C1206F401079, with Duramax Diesel Engine, Dakota Service Body, I-R Gas Powered Air Compressor (Unit 385) (Sioux Falls, SD) Ford 4x2 Single-Axle Mechanic s Truck Model F550 XL, VIN 1FDAF57P55EA21158, Diesel, Service Body, Auto Crane Electric Hoist (Unit 318) F/P (Rapid City, SD) Ford 4x4 Pick-up Truck Model F150, VIN 1FTPX14565FA73111 (Sioux Falls, SD) 2003 Ford 4x4 Crew Cab Pick-up Truck Model F150 XLT, VIN 1FTRW08L93KB47527 (Gering, NE) 1996 Dodge Dually Utility Truck, VIN 1B7JC26Z7TJ184249 (Stanley, ND) PLACE BIDS ONLINE ONLY PPL Auction
2004 Bid Online April 13th through April 16th TRAILERS TRAVEL TRAILER 1998 Wells Cargo 20 Tandem-Axle, 13,000 lb. Capacity Utility Cargo Trailer Model EW-2025, VIN 1WC200J23W1083934, with Side Door, Double Rear Doors, Storage Racks & Lubrication Equipment (Sioux Falls, SD) 2004 J&LS Cargo Express 12 Tandem-Axle Utility Cargo Trailer Model Shadow Master, VIN 4U01S12204A021517, with Side Door, Double Rear Doors, Storage Racks & Lubrication Equipment (Sioux Falls, SD) 1992 Coachman 32 Travel Trailer (Gering, NE) SHOP EQUIPMENT (all in Sioux Falls, SD) Miller 200 Amp DC Constant Potential MIG Welding Machine Model SCP-200C, S/N HJ185138, with Millermatic 10E Wire Feeder, Cart, MIG Welding Gun, Welding Leads & Inert Gas Regulator/Flow Meter Lincoln 225 Amp AC/DC Shielded Arc Welding Machine Model AC/DC-225, S/N 8566-203, with Cart & Leads Miller Suitcase Type Portable 12 Volt Flux-Core Wire Feeder Model S-32P, with MIG Welding Gun & Leads Smiths Portable Oxy Acetylene Cutting Torch Rig Model WH200A, with Harper Cylinder Cart, Hoses, Smiths Regulators, WA200 Torch Body, SC209 Cutting Attachment, Welding Tips & ST602 Rosebud Heating Tip Aaladin Kerosene Fired Electric Operated 3000 PSI High Pressure Hot Water Washer Model 1470, S/N 60839, with 8 HP Electric Motor, Cleaning Wand & Gun, Hose, Hose Reel, Cleaning Solution Tank, Mobile Cart Sanborn 5 HP Vertical Tank Type Air Compressor Model B51-A24-80V1, S/N L3125027 Custom 2-Section Welded Steel Storage Shelf Unit, with Contents Central Machinery 15 Floor Type Single-Spindle 1 HP V-Belt Drive Drill Press Model T-583, S/N 10816065 Wilton 6 Heavy Duty Bench Vise, with Welded Steel Work Table Werner 8 Fiberglass Step Ladder Tool Shop 1/2 HP, 6 Double End Pedestal Grinder Shop Vac 5 Gallon, 5.5 HP Portable Shop Vacuum Werner 4 Fiberglass Step Ladder Lyon Type 36 x 6 Steel Shelving Unit, with Welding Supplies Milwaukee 14 Chop Saw Model 6177, with Vise, 15 Amp (2) Milwaukee Battery Powered Grease Guns Model M-12, with Charger 20 Gallon Parts Washer Model 140400, with Pump & Stand Custom 1 Ton x 18 Span Portable Gantry Hoist, with Mobile Caster Base, 1/2 Ton Dayton Electric Chain Hoist & 2 Ton Chain Fall Custom Portable Hydraulic Engine Hoist, AC Motor, Hydraulic Pump & Control Valve Solar 6/12/24 Volt Battery Charger Model 670 Fleet PPL Auction
REPAIR PARTS & COMPONENTS Large Assortment of Equipment Repair Parts & Disassembled Equipment Components Auction Terms & Conditions REGISTRATION & BIDDING: Everything will be sold to the highest bidders for cash, in accordance with the auctioneer s normal Terms of Sale, which are available at the site or by request at 224-927-5300. All bids are in US dollars. An 18% Buyer s Premium will be added to online bids. Your bid is a contract: Place a bid only if you re serious about buying the item. If you are the high bidder, you will enter into a legally binding contract with PPL Auction. PAYMENT: All successful Bidders agree to make full payment to PPL Auction at the conclusion of the sale. Only Bank Wire Transfer, Bank Check or Cashier s Check payable to PPL Auction will be accepted. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. If you are using a wire transfer your bank may wire the funds the day after the sale. All sales are subject to sales and/or local taxes unless a signed exemption form is presented at the time of the purchase. Payment will be made in US dollars only. VERIFY DESCRIPTIONS: Note: Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information contained in the auction brochure, lot catalog or sale web pages. Buyer agrees to accept assets purchased per standard auction terms, AS IS, WHERE IS, WITH ALL FAULTS WITHOUT ANY REPRESENTATION OR WARRANTY BY PPL AUCTION OR ANY OTHER PERSON. THERE ARE NO EXPRESSED OR IMPLIED REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ASSETS INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATION OR WARRANTY REGARDING THE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. REMOVAL & RIGGING: Removal and Rigging is the responsibility of the buyer. Anyone, either a buyer or a rigger, who uses a powered vehicle to remove anything from the auction site, will be required to present a certificate of insurance. Removal may begin when the auction has completed and payment in full has been made. ISSUANCE OF TITLE: Titles relative to titled assets purchased will be mailed to the purchaser s address on file after payment is received and cleared. All invoices must be paid in full at end of auction. Any merchandise not paid for at this time will be considered abandoned and may be resold by auctioneer, any loss incurred in the resale to be borne by the original buyer. 105 Revere Drive, Suite C Northbrook, Illinois 60062 sales@pplauction.com 3901 Kraus Lane Hamilton, OH 45014 513.738.3311 www.myronbowling.com PPL Auction