MODERN LONG SERVICE LIFE S THE MODERN S The Hypoxis MLS lubricants of Dyade are high quality lubricants with one of the latest API specifications. The Hypoxis MLS comes in the 5W/30 and 5W/40 full synthetic grades and the 10W/40 semi-synthetic grade. The API SN specification makes sure the lubricants have high temperature deposit protection for pistons, excellent sludge control, better seal compatibility and after treatment compatibility.the Dyade Hypoxis MLS meets the specification, which is intended for the use in high performance gasoline and direct injection diesel engines. However, it is also particularly suitable for applications that need to meet the ACEA A3/B3 specification. Our Hypoxis MLS grades meet several specifications of large OEMs such as MB, VW, BMW, PSA and Renault. FULL SYNTHETIC MB 228.1/229.3 / 505.00 5 Ltr DL0045 RN 0700 / 0710 FUEL ECONOMY RATING LONG SERVICE LIFE Product Information HYPOXIS IS AVAILABLE IN (Full Synthetic) SAE 5W/40 (Full Synthetic) SAE 10W/40 (Semi-Synthetic) SPECIFICATIONS /505.00 /229.3 PRODUCT SPECIFICATIONS GRADE SAE 5W/40 SAE 10W/40 Density 15 kg/m3 855 858 873 Viscosity 40 cst 67 87,4 95 Viscosity 100 cst 11.7 14,4 14.2 Viscosity Index CCS -25 cp Viscosity Index CCS -30 cp Viscosity Index <7000 <6600 <6600 171 172 153 Pour point -42-33 -39 Flash point 228 222 201 TBN mg KOH/g 10,5 8.9 7.9 Sulphated ash %wt 1.33 1.33 0.95 Operating temperature -35/150-35/150-30/150 LUBRICANTS B.V. INFO@-LUBRICANTS.COM WWW.-LUBRICANTS.COM SPECIFICATIONS SAE 5W/40 /505.00 /229.3 Fiat 9.55535-M2 SPECIFICATIONS SAE 10W/40 VW 501.00/505.00 AVAILABLE PACKAGING 250 ML 500 ML 1L 4L 5L 20L 205L 1000L
MODERN LONG SERVICE LIFE S The API SN refers to gasoline engine specifications. In 2010 the American Petroleum Institute introduced a new engine oil category under the name API SN and a new supplemental category called Resource Conserving. The API SN category is an improvement over the API SM category in the following areas: High temperature deposit protection for pistons, better sludge control, better seal compatibility and after treatment compatibility. The API CF refers to diesel engine specifications. Officially this specification is obsolete and replaced by the more modern specifications. It services indirect-injection diesel engines and other diesel engines that use a broad range of fuel types, including those using fuel with high sulfur content. For example, over 0.5% wt., effective control of piston deposits, wear and copper-containing bearing corrosion is essential for these engines, which may be naturally aspirated, turbocharged or supercharged. Oils designated for this service have been in existence since 1994 and may be used when API Service Category CD is recommended. For petrol and diesel engines. Minimum quality required ACEA A3 / B3 / B4 and. It can only certify 0/ 5 W-x oils. Oil for gasoline engines. Successor of VW 501.01 and VW 500.00 specification. Recommended for those engines, which are subject to arduous conditions. It must not be used for any engines with variable service intervals or any which are referred to under other specifications. Passenger car diesel engine oil specification, minimum performance level CCMC PD-2. Lists viscosities SAE 5W-50, 10W-50/60, 15W-40/50, 20W-40/50 requiring 13% max. evaporation loss and SAE 5W-30/40, 10W-30/40 requiring 15% max. evaporation loss. LUBRICANTS B.V. INFO@-LUBRICANTS.COM WWW.-LUBRICANTS.COM
MODERN LONG SERVICE LIFE S (PART 2) Special BMW approval for fully synthetic long-life oil. Viscosities Fully synthetic long-life oil with fuel economy properties. Oils meeting this specifications must have a low HTHS viscosity to meet the manufacturer s fuel economy requirements. These oils are only suitable for the following engines: N1x, N2x, N54, N55, N63, N74. Special GM approval for long-life engine oil for diesel engines. Viscosity is SAE 5W-40. Product meets ACEA A3/B3/B4. Drain interval can be as long as 50 000 kms. Renault RN 0700 is an engine oil specification introduced in 2007 upon introduction of the Laguna III. General requirements: ACEA A3/B4 or ACEA A5/B5. Renault 0710 engine oil specification; introduced in 2007 upon introduction of the Laguna III. General requirements: + additional Renault demands. Renault RN0700/0710 SAE 5W/40 The API SN refers to gasoline engine specifications. In 2010 the American Petroleum Institute introduced a new engine oil category under the name API SN and a new supplemental category called Resource Conserving. The API SN category is an improvement over the API SM category in the following areas: High temperature deposit protection for pistons, better sludge control, better seal compatibility and aftertreatment compatibility. The API CF refers to diesel engine specifications. Officially this specification is obsolete and replaced by the more modern specifications. Services typical indirect-injection diesel engines and other diesel engines that use a broad range of fuel types, including those using fuel with high sulfur content; for example, over 0.5% wt. Effective control of piston deposits, wear and copper-containing bearing corrosion is essential for these engines, which may be naturally aspirated, turbocharged or supercharged. Oils designated for this service have been in existence since 1994 and may be used when API Service Category CD is recommended. LUBRICANTS B.V. INFO@-LUBRICANTS.COM WWW.-LUBRICANTS.COM
Renault RN0700/0710 MODERN LONG SERVICE LIFE S SAE 5W/40 (PART 2) For petrol and diesel engines. Minimum quality required ACEA A3 / B3 / B4 and. It can only certify 0/ 5 W-x oils. Oil for gasoline engines. Successor of VW 501.01 and VW 500.00 specification. Recommended for those which are subject to arduous conditions. It must not be used for any engines with variable service intervals or any which are referred to under other specifications. Passenger car diesel engine oil specification, minimum performance level CCMC PD-2. Lists viscosities SAE 5W-50, 10W-50/60, 15W-40/50, 20W-40/50 requiring 13% max. evaporation loss and SAE 5W-30/40, 10W-30/40 requiring 15% max. evaporation loss. Special GM approval for long-life engine oil for diesel engines. Viscosity is SAE 5W-40. Product meets ACEA A3/B3/B4. Drain interval can be as long as 50 000 kms. Special specification recommended by Porsche, please ask your local Dyade representative what specific models it applies. Peugeot/Citroën engine oil specification introduced in 2009. General specifications: + additional PSA tests. Renault RN 0700 is an engine oil specification introduced in 2007 upon introduction of the Laguna III. General requirements: ACEA A3/B4 or ACEA A5/B5. Renault 0710 engine oil specification; introduced in 2007 upon introduction of the Laguna III. General requirements: + additional Renault demands. LUBRICANTS B.V. INFO@-LUBRICANTS.COM WWW.-LUBRICANTS.COM
MODERN LONG SERVICE LIFE S SAE 10W/40 (Semi Synthetic) The API SL specification was adopted to describe engine oils for use in 2001. It is for use in service typical of gasoline engines in present and earlier passenger cars, sports utility vehicles, vans and light trucks operating under vehicle manufacturers recommended maintenance procedures. Oils meeting API SL requirements have been tested according to the American Chemistry Council (ACC) Product Approval Code of Practice and may utilize the API Base Oil Interchange and Viscosity Grade Engine Testing Guidelines. They may be used where API Service Category SJ and earlier categories are recommended. The CF specification typically services indirect-injection diesel engines and other diesel engines that use a broad range of fuel types, including those using fuel with high sulfur content; for example, over 0.5% wt. Effective control of piston deposits, wear and copper-containing bearing corrosion is essential for these engines, which may be naturally aspirated, turbocharged or supercharged. Oils designated for this service have been in existence since 1994 and may be used when API Service Category CD is recommended. VW 501.01 Conventional motor oils suitable for some VW engines built before MY 2000. This is an old oil specification and is applicable to engines built before model year 2000 (up to August 1999). Oils with an approval made post March 1997 were given an alternative, later VW specification. VW 501.01 LUBRICANTS B.V. INFO@-LUBRICANTS.COM WWW.-LUBRICANTS.COM