POWER TOOL SOLUTIONS CALL TODAY TOLL FREE: Abrasive Tools

CATALOG 2018 www.eagle-group.com

Abrasive Tools Impact Wrenches Drills TM POWER TOOL SOLUTIONS Eagle Group is a leading supplier of power tools for industrial markets. Whether you need tools for material removal, finishing, maintenance, automotive, or assembly Eagle Group has your solution. Eagle Group has been a supplier of power tools for over 30 years throughout the United States, Mexico and South America. Located in Portland, Oregon, Eagle resides in AIMCO s corporate complex. Percussion Tools Fastening Tools Cutting Tools Accessories CALL TODAY TOLL FREE: 1-800-852-1368

TABLE OF CONTENTS Grinders...5 Die Grinders, Pencil Grinder, Die Grinder Kit, Angle Grinders, Horizontal Grinders, Vertical Grinders Sanders...19 Angle Sanders/Polisher, Orbital Sanders, Jitterbug Sander, High-Speed Sander, Belt Sanders, Board Sander Impact Wrenches...25 Clutch Selection Information; 3/8, 1/2, 3/4, 1, 1-1/2 Impact Wrenches Ratchet Wrenches...31 1/4, 3/8, 1/2 Ratchet Wrenches Fastening Tools...35 Clutch Selection Information, Stall Screwdrivers, Adjustable Clutch Screwdrivers, Positive Clutch Screwdrivers, Impact Screwdrivers, Torque Controlled Screwdrivers, Auditor TM Torque Cube Testers Drills...45 Pistol, Inline, Angle, Reversible, Non-reversible, 1/4, 3/8, 1/2 Percussion Tools....53 Air Hammers, Chipping Hammers, Needle Scalers, Flux Chippers, Replacement Needles Cutting / Specialty Tools....57 Saws/Cut-Off Tools, Punch/Flange Tool, Blow Guns, Tire Buffers Accessories...61 Torque Wrenches, Balancers, Retractors, FRL Units, Regulators, Hoses, Air Fittings, Couplers, Bits and Sockets, Mag-O-Nets Reference Materials....71 Conversion Charts, Warranty Information Index...74 3

THE PERQ DIFFERENCE PERQ is an industry standard formula that matches the needs of manufactures and service providers with the tools they use in their processes. Eagle Group and its distributors evaluate each process based on the Productivity, Ergonomics, Reliability and Quality (PERQ ) formula to determine the company s unique blend of the PERQ elements. Eagle Group then provides tooling that will enhance that mix. The end result is a production or maintenance process that runs efficiently, produces high quality products, and does so at the lowest possible cost. Combining PERQ with Eagle Group's vast experience and unequalled service will enable the customer to succeed in the global marketplace. Each of the PERQ elements acts as a gear each interacts with the others to affect the overall profitability of the work process. Eagle Group looks at each step of the project to determine the best type of tool or equipment for that application. Only Eagle Group, with its extensive product lineup, can offer the customer the ideal tool for a specific job. PRODUCTIVITY The speed and efficiency of the process Every company wants to produce product, or complete a job in the most cost-effective manner possible. Whether the customer is a manufacturer building several hundred products daily, or a service company, repairing and performing maintenance, Eagle Group provides products and services that allow each company to work at the ideal pace in order to keep its processes running efficiently. RELIABILITY The total cost of tool maintenance and repair To keep companies producing, tools must perform reliably. Eagle Group helps organizations face the challenges of maintenance, repair and lost labor time by offering products with superior workmanship and durability. By combining high quality products with a detailed and flexible service training program, Eagle Group ensures its tools will meet any customer s expectations of reliability. ERGONOMICS The relationship between person and the process Employees are the most important assets of any company. Protecting these individuals from job related health issues is critical. To help its customers face the challenges surrounding ergonomics, Eagle Group focuses on providing products that combine the latest ergonomic advances. These features allow employees to do their jobs in the safest possible manner and help companies avoid the hidden costs of workplace injuries. QUALITY The ability of the tool to adhere to process requirements The most important challenge faced by most companies is to meet its customer s demands for quality. Eagle Group provides tools that have been tested and proven to meet the most stringent engineering specifications. Eagle Group backs those tools with best in industry service and technical support. This allows companies to focus on their most important goal completing their projects efficiently and to the highest quality standards. THE EAGLE GROUP DIFFERENCE l Tools designed to the needs of the user. l Varied Impact Mechanisms, Housing Designs and Materials l Tested and verified specification data - Torque Range Specs from a Three Second Trigger Pull (Impacts) - Maximum Torque Specs from a Five Second Trigger Pull (Impacts) l Industry Benchmark Test Equipment l Full Service and Support Capabilities Don t Settle for Claims Trust in Tested Performance 4 www.eagle-group.com

GRINDERS Die Grinders...................................... 6-11 Pencil Grinder...................................... 11 Pistol Mini Die Grinder Kit............................. 11 Horizontal Grinders.................................... 12 Angle Grinders.................................... 12-14 Turbine Grinders...................................... 15 Vertical Grinders.................................. P O WER TOOL SOLUTIONS 16-17

GRINDERS 5I-06251 5I-10202 1/4 Die Grinder 1/4 Die Grinder Heavy duty steel housing Compact size Safety lockout throttle lever prevents accidental tool start All steel body construction Erickson collet precisely grips attachments for long-lasting, minimal runout Governed air motor for safe use and maximum power and speed under load Collet Size:... 1/4 RPM - Approximate:... 25,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 1.45 lb /.66 kg Length:... 6.5 in / 165 mm Approximate Power:... 0.60 hp Air Usage:... 19 cfm Collet Size:... 1/4 RPM - Approximate:... 20,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 2.82 lb / 1.28kg Length:... 7.9 in / 201 mm Approximate Power:... 1.00 hp Air Usage:... 35 cfm Air Inlet:... 3/8 5I-04252 5I-06222 1/4 Composite Die Grinder Lightweight design with smooth performance Erickson collet precisely grips attachments and result in minimal runout Safety lockout throttle lever prevents accidental tool start 1/4 Composite Die Grinder Lightweight design with smooth performance Erickson collet precisely grips attachments and result in minimal runout Safety lockout throttle lever prevents accidental tool start Collet Size:... 1/4 RPM - Approximate:... 25,000 Throttle Type:... Safety Lever Exhaust:... Rear Weight:... 1 lb / 0.46 kg Length:... 7 in / 179 mm Approximate Power:... 0.40 hp Air Usage:... 25 cfm Collet Size:... 1/4 RPM - Approximate:... 22,000 Throttle Type:... Safety Lever Exhaust:... Rear Weight:... 1.58 lb / 0.72 kg Length:... 7.8 in / 198 mm Approximate Power:... 0.60 hp Air Usage:... 30 cfm 6 www.eagle-group.com

GRINDERS 5I-03302F 5I-03302 1/4 Die Grinder 1/4 Die Grinder Lightweight design with smooth performance Erickson collet precisely grips attachments and result in minimal runout Safety lockout throttle lever prevents accidental tool start Front exhaust Collet Size:... 1/4 RPM - Approximate:... 30,000 Throttle Type:... Lever Exhaust:... Front Weight:... 1 lb /.45 kg Length:... 6.5 in / 165 mm Approximate Power:... 0.30 hp Air Usage:... 20 cfm Lightweight design with smooth performance Erickson collet precisely grips attachments and result in minimal runout Safety lockout throttle lever prevents accidental tool start Collet Size:... 1/4 RPM - Approximate:... 30,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 1 lb /.45 kg Length:... 6.5 in / 165 mm Approximate Power:... 0.30 hp Air Usage:... 20 cfm 5200EC 5201EC 1/4 Composite Die Grinder Lightweight and durable Ergonomic composite housing with a soft comfortable grip For blending, smoothing and sanding Less noise, vibration, and thermal transfer than aluminum tools Collet Size:... 1/4 RPM - Approximate:... 22,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 1.3 lb / 0.59 kg Length:... 6.75 in / 171 mm Approximate Power:... 0.75 hp Air Usage:... 14 cfm 1/4 Composite Mini Die Grinder Lightweight and durable Ergonomic composite housing with a soft comfortable grip Good for light weld grinding, polishing, and breaking sharp edges Less noise, vibration, and thermal transfer than aluminum tools Collet Size:... 1/4 RPM - Approximate:... 25,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 0.8 lb / 0.36 kg Length:... 6.25 in / 159 mm Approximate Power:... 0.50 hp Air Usage:... 12 cfm www.eagle-group.com 7 7

GRINDERS 5110 5002C 1/4 Mini Die Grinder 1/4 Die Grinder Good for light weld grinding, polishing, and breaking sharp edges Air regulator allows operator to control speed Collet Size:... 1/4 RPM - Approximate:... 25,000 Throttle Type:... Safety Lever Exhaust:... Rear Weight:... 0.8 lb / 0.4 kg Length:... 4.8 in / 122 mm Approximate Power:... 0.38 hp Air Usage:... 14 cfm Compact and lightweight All ball bearing construction Rib textured handle provides firm grip For blending, smoothing and porting 1/8 collet available (part #32046-31-02) Collet Size:... 1/4 RPM - Approximate:... 22,000 Throttle Type:... Safety Lever Exhaust:... Rear Weight:... 1.2 lb / 0.5 kg Length:... 6.9 in / 175 mm Approximate Power:... 0.33 hp Air Usage:... 14 cfm 5001 5206EC 1/4 Die Grinder All steel housing Built-in regulator 1/8 collet available Collet Size:... 1/4 RPM - Approximate:... 18,000 Throttle Type:... Safety Lever Exhaust:... Front Weight:... 1.3 lb / 0.6 kg Length:... 6.5 in / 165 mm Approximate Power:... 0.33 hp Air Usage:... 14 cfm 1/4 Composite Die Grinder, 3 Extended Lightweight and durable Extended length for hard to reach areas Ergonomic composite housing with a soft comfortable grip For blending, smoothing and porting Less noise, vibration, and thermal transfer than aluminum tools Collet Size:... 1/4 RPM - Approximate:... 25,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 1.43 lb / 0.65 kg Length:... 9.25 in / 235 mm Approximate Power:... 0.60 hp Air Usage:... 12 cfm 8 www.eagle-group.com

GRINDERS 5I-04252X 5I-06202X 1/4 Composite Die Grinder, 5 Extended Lightweight design with smooth performance Erickson collet precisely grips attachments and result in minimal runout Safety lockout throttle lever prevents accidental tool start 1/4 Composite Die Grinder, 5 Extended Lightweight design with smooth performance Erickson collet precisely grips attachments and result in minimal runout Safety lockout throttle lever prevents accidental tool start Collet Size:... 1/4 RPM - Approximate:... 25,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 1.40 lb / 3.08 kg Length:... 12.2 in / 309 mm Approximate Power:... 0.40 hp Air Usage:... 25 cfm Collet Size:... 1/4 RPM - Approximate:... 20,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 2.31 lb / 1.05 kg Length:... 13.03 in / 331 mm Approximate Power:... 0.60 hp Air Usage:... 30 cfm 5207EC 5I-10202X 1/4 Composite Die Grinder, 5 Extended Lightweight and durable Extended length for hard to reach areas Ergonomic composite housing with a soft comfortable grip For blending, smoothing and porting Less noise, vibration, and thermal transfer than aluminum tools Collet Size:... 1/4 RPM - Approximate:... 25,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 1.45 lb / 0.66 kg Length:... 11.25 in / 286 mm Approximate Power:... 0.60 hp Air Usage:... 12 cfm 1/4 Die Grinder, 6 Extended 1/4 Erickson collet precisely grips attachments for long-lasting, minimal runout Full 1 HP governed air motor for safe use and maximum power and speed under load Robust all-steel body construction Double bearing supported spindle Robust safety lever Collet Size:... 1/4 RPM - Approximate:... 20,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 4.5 lb / 2.0 kg Length:... 14.5 in / 368 mm Approximate Power:... 1.00 hp Air Usage:... 35 cfm Air Inlet:... 3/8 www.eagle-group.com 9

GRINDERS 5116 5A-04202 1/4 Die Grinder, 6 Extended All ball bearing construction Extended length for hard-to-reach areas Rib textured handle provides firm grip For blending, smoothing, and porting 1/4 Composite Angle Die Grinder, 90 Lightweight design with smooth performance Erickson collet precisely grips attachments and result in minimal runout Safety lockout throttle lever prevents accidental tool start Collet Size:... 1/4 RPM - Approximate:... 22,000 Throttle Type:... Safety Lever Exhaust:... Rear Weight:... 2.75 lb / 1.2 kg Length:... 13 in / 305 mm Approximate Power:... 0.33 hp Air Usage:... 14 cfm Collet Size:... 1/4 RPM - Approximate:... 20,000 Throttle Type:... Safety Lever Exhaust:... Rear Weight:... 1.3 lb /.59 kg Length:... 7.2 in / 182 mm Approximate Power:... 0.40 hp Air Usage:... 19 cfm 5A-04122 5202EC 1/4 Composite Angle Die Grinder, 90 Lightweight design with smooth performance Erickson collet precisely grips attachments and result in minimal runout Safety lockout throttle lever prevents accidental tool start Collet Size:... 1/4 RPM - Approximate:... 12,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 1.3 lb /.59 kg Length:... 7.2 in / 182 mm Approximate Power:... 0.40 hp Air Usage:... 20 cfm 1/4 Composite Angle Die Grinder, 90 Lightweight and durable Ergonomic composite housing with a soft comfortable grip Less noise, vibration, and thermal transfer than aluminum tools Right angle provides easy access For sanding, polishing, deburring, and porting Collet Size:... 1/4 RPM - Approximate:... 20,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 1.1 lb / 0.55 kg Length:... 6.25 in / 159 mm Approximate Power:... 0.60 hp Air Usage:... 12 cfm 10 www.eagle-group.com

GRINDERS 5203EC 5003C 1/4 Composite Angle Die Grinder, 105 Lightweight and durable Ergonomic composite housing with a soft comfortable grip Best for grinding and polishing in hard to reach areas Less noise, vibration, and thermal transfer than aluminum tools 1/4 Angle Die Grinder Compact lightweight design Ball bearing construction For sanding, deburring, and polishing Right angle provides easy access Collet Size:... 1/4 RPM - Approximate:... 20,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 1.1 lb / 0.55 kg Length:... 6.25 in / 159 mm Approximate Power:... 0.60 hp Air Usage:... 12 cfm Collet Size:... 1/4 RPM - Approximate:... 20,000 Throttle Type:... Safety Lever Exhaust:... Rear Weight:... 1.0 lb / 0.5 kg Length:... 6.3 in / 159 mm Approximate Power:... 0.33 hp Air Usage:... 14 cfm 5000 5102K Pencil Grinder Excellent for blending / finishing work High speed precision Complete with air hose, exhaust hose, and integral silencer Collet Size:... 1/8 RPM - Approximate:... 54,000 Throttle Type:... Twist Exhaust:... Rear Hose Weight:... 0.6 lb / 0.3 kg Length:... 5.3 in / 133 mm Approximate Power:... 0.10 hp Air Usage:... 6 cfm Pistol Mini Die Grinder Kit Complete with - 1/8 & 1/4 collet - 5 ea. 1/8 grinding stones - 5 ea. 1/4 grinding stones Convenient speed regulator, direct drive, no angle gears, and an ergonomic design for operator comfort and control Collet Size:... 1/8 & 1/4 RPM - Approximate:... 15,000 Throttle Type:... Trigger Exhaust:... Rear Weight:... 1.5 lb / 0.7 kg Length:... 3.5 in / 89 mm Approximate Power:... 0.38 hp Air Usage:... 4 cfm www.eagle-group.com 11

GRINDERS GDB31-E18-CE PREMIER QUALITY GDB31-E18-CW PREMIER QUALITY 2.7 HP Horizontal Grinder 60 100% faster material removal than other grinders on the market Patented Low Friction air motor design Less wear on air motor parts Less susceptible to poor air quality Higher horsepower than competitors 2.7 HP Horizontal Grinder 60 100% faster material removal than other grinders on the market Patented Low Friction air motor design Less wear on air motor parts Less susceptible to poor air quality Higher horsepower than competitors Collet Size:... 1/4 RPM - Approximate:... 18,000 Throttle Type:... Safety lever Exhaust:... Rear Weight:... 4.8 lb / 2.2 kg Length:... 15.1 in / 384 mm Approximate Power:... 2.7 hp Air Usage:... 34 / 63 cfm Air Inlet:... 1/2 * CFM air consumption readings are static / dynamic at 90 psi. Spindle Type:... 5/8-11 RPM - Approximate:... 18,000 Throttle Type:... Safety lever Exhaust:... Rear Weight:... 4.9 lb / 2.2 kg Length:... 14.6 in / 371 mm Approximate Power:... 2.7 hp Air Usage:... 34 / 63 cfm Air Inlet:... 1/2 * CFM air consumption readings are static / dynamic at 90 psi. 5205-2EC 5104 3 Angle Grinder, 105 4 Angle Grinder Ergonomic and safe use design 105 angled head design for improved sight lines and spark angle Tight access use 1/16 to 1/4 wheel capability All steel internal parts Four step heat treat process Sandcast housing Uses Type 27 wheels and abrasive discs Wheel Capacity:... 3 RPM - Approximate:... 15,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 1.5 lb / 0.68 kg Length:... 8.25 in / 210 mm Approximate Power:... 0.60 hp Air Usage:... 12 cfm Wheel Capacity:... 4 Spindle Type:... 3/8-24 RPM - Approximate:... 13,500 Throttle Type:... Push button with lever Exhaust:... Front right Weight:... 4.4 lb / 2.0 kg Length:... 8.3 in / 211 mm Approximate Power:... 1.00 hp Air Usage:... 34 cfm 12 www.eagle-group.com

GRINDERS 5105 5194EC 5 Angle Grinder All steel internal parts Four step heat treat process Sandcast housing Uses Type 27 wheels and abrasive discs 4 Composite Angle Grinder Swivel guard adjustable in nine steps Composite body, spindle lock, rear exhaust, quiet operation Reversible side handle Governed motor Wheel Capacity:... 5 Spindle Type:... 5/8-11 RPM - Approximate:... 10,800 Throttle Type:... Lever with push-button safety Exhaust:... Front right Weight:... 4.4 lb / 2.0 kg Length:... 8.3 in / 211 mm Approximate Power:... 1.00 hp Air Usage:... 34 cfm Adjustable in nine steps Spindle:... 3/8-24 RPM - Approximate:... 12,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 3.80 lb / 1.72 kg Length:... 9.6 in / 244 mm Approximate Power:... 1.30 hp Air Usage:... 25 cfm P/N # 5194EC KIT with #8101 and #8103 5195EC 5196EC 4.5 / 5 Composite Angle Grinder ACCESSORIES 8101 - Ergo Handle Swivel guard adjustable in nine steps Composite body, spindle lock, rear exhaust, quiet operation Reversible side handle Governed motor 5195EC: 4.5 5196EC: 5 Adjustable in nine steps Spindle:... 5/8-11 RPM - Approximate:... 12,000 Throttle Type:... Lever Exhaust:... Rear Weight:... 3.8 lb / 1.72 kg Length:... 9.6 in / 244 mm Approximate Power:... 1.30 hp Air Usage:... 25 cfm P/N # 5195EC KIT / 5196EC KIT with #8101 and #8102 Features Dramatically reduces vibration For models 5194EC, 5195EC, and 5196EC 8102 / 8103 - Quick Nut Features Eliminates spanner wrench #8102 for 5/8-11 spindle (5195EC & 5196EC) #8103 for 3/8-24 spindle (5194EC) www.eagle-group.com 13

GRINDERS 5006 5007 4 Angle Grinder 5 Angle Grinder Governed motor 5/8-11 adapter included Uses Type 27 wheels, abrasive discs Spiral bevel gearing for extended life, low vibration For weld prep, smoothing, rust removal, and deburring Lightweight aluminum alloy housing Wheel Capacity:... 4 Spindle Type:... 3/8-24 RPM - Approximate:... 11,000 Throttle Type:... Safety Lever Exhaust:... Front right Weight:... 4.0 lb / 1.8 kg Length:... 9.5 in / 241 mm Approximate Power:... 0.60 hp Air Usage:... 18 cfm Governed motor 5/8-11 adapter included Uses Type 27 wheels, abrasive discs Spiral bevel gearing for extended life, low vibration For weld prep, smoothing, rust removal, deburring Rugged lightweight aluminum alloy housing Wheel Capacity:... 5 Spindle Type:... 3/8-24 RPM - Approximate:... 11,000 Throttle Type:... Safety lever Exhaust:... Front right Weight:... 4.3 lb / 1.8 kg Length:... 9.5 in / 241 mm Approximate Power:... 0.60 hp Air Usage:... 18 cfm 5008 5A-1676-7 7 Angle Grinder 7 Angle Grinder Governed motor Aluminum alloy housing Uses 7/8 arbor wheels only Spiral bevel gear angle head for long tool life For cleaning, deburring, notching and grinding Wheel Capacity:... 7 Spindle Type:... 5/8-11 RPM - Approximate:... 7,000 Throttle Type:... Push button with lever Exhaust:... Bottom Weight:... 7.9 lb / 3.2 kg Length:... 13.5 in / 343 mm Approximate Power:... 1.10 hp Air Usage:... 34 cfm Air Inlet:... 3/4 All steel internal parts Four step heat treat process Sandcast housing Uses Type 27 wheels and abrasive discs Wheel Capacity:... 7 Spindle Type:... 5/8-11 RPM - Approximate:... 7,600 Throttle Type:... Lever Exhaust:... Front right Weight:... 6.6 lb / 3 kg Length:... 11.8 in / 300 mm Approximate Power:... 1.6 hp Air Usage:... 56 cfm Air Inlet:... 3/8 14 www.eagle-group.com

GRINDERS GAB41-A60-DW PREMIER QUALITY GTB31-A12-DW PREMIER QUALITY 9 Angle Grinder 5 Turbine Grinder 60 100% faster material removal than other grinders on the market Patented Low Friction air motor design Less wear on air motor parts Less susceptible to poor air quality Higher horsepower than competitors Wheel Capacity:... 9 Approximate Power:... 3.75 hp RPM - Approximate:... 6,000 Spindle Type:... 5/8-11 Throttle Type:... Safety lever Weight:... 7.5 lb / 3.4 kg Air Usage:... 38 / 105 cfm* Air Inlet:... 1/2 * CFM air consumption readings are static / dynamic at 90 psi. 60 100% faster material removal than other grinders on the market Twice the horsepower of vaned motors Lower noise level than vaned motors No repair and replacement of common air motor parts Oil-free operation required Wheel Capacity:... 5 Approximate Power:... 4.6 hp RPM - Approximate:... 12,000 Spindle Type:... 5/8-11 Throttle Type:... Safety lever Weight:... 5.7 lb / 2.6 kg Air Usage:... 30 / 95 cfm* Air Inlet:... 1/2 * CFM air consumption readings are static / dynamic at 90 psi. GTB41-A85-DW PREMIER QUALITY GTB41-A60-DW-6 GTB41-A60-DW PREMIER QUALITY 7 Turbine Grinder 6 / 9 Turbine Grinder 60 100% faster material removal than other grinders on the market Twice the horsepower of vaned motors Lower noise level than vaned motors No repair and replacement of common air motor parts Oil-free operation required Wheel Capacity:... 7 Approximate Power:... 6.5 hp RPM - Approximate:... 8,500 Spindle Type:... 5/8-11 Throttle Type:... Safety lever Weight:... 7 lb / 3.2 kg Air Usage:... 38 / 131 cfm* Air Inlet:... 1/2 * CFM air consumption readings are static / dynamic at 90 psi. 60 100% faster material removal than other grinders on the market Twice the horsepower of vaned motors Lower noise level than vaned motors No repair and replacement of common air motor parts Oil-free operation required Wheel Capacity:... 6 (DW-6) / 9 (DW) Approximate Power:... 6.5 hp RPM - Approximate:... 6,000 Spindle Type:... 5/8-11 Throttle Type:... Safety lever Weight:... 7 lb / 3.2 kg Air Usage:... 38 / 131 cfm Air Inlet:... 1/2 * CFM air consumption readings are static / dynamic at 90 psi. www.eagle-group.com 15

5040 5040-6 7 Vertical Grinder 6 Vertical Grinder 3 HP governed motor. Durable cast housing. Safety throttle. Also available in 6 and 9 guards 3 HP governed motor Durable cast housing Safety throttle Also available in 7 and 9 guards Wheel Capacity:... 7 Approximate Power:... 3.0 hp RPM - Approximate:... 6,000 Spindle Type:... 5/8-11 Throttle Type:... Push button with lever Weight:... 7.7 lb / 3.5 kg Air Usage:... 49 cfm Air Inlet:... 1/2 Wheel Capacity:... 6 Approximate Power:... 3.0 hp RPM - Approximate:... 6,000 Spindle Type:... 5/8-11 Throttle Type:... Push button with lever Weight:... 7.7 lb / 3.5 kg Air Usage:... 49 cfm Air Inlet:... 3/8 5040-9 GVB51P-V85-DW PREMIER QUALITY 9 Vertical Grinder 7 Vertical Grinder 3 HP governed motor Durable cast housing Safety throttle Also available in 6 and 7 guards Wheel Capacity:... 9 Approximate Power:... 3.0 hp RPM - Approximate:... 6,000 Spindle Type:... 5/8-11 Throttle Type:... Push button with lever Weight:... 7.7 lb / 3.5 kg Air Usage:... 49 cfm Air Inlet:... 3/8 60 100% faster material removal than other grinders on the market Patented Low Friction air motor design Less wear on air motor parts Less susceptible to poor air quality Higher horsepower than competitors Wheel Capacity:... 7 Approximate Power:... 4.3 hp RPM - Approximate:... 8,500 Spindle Type:... 5/8-11 Throttle Type:... Safety lever Weight:... 10.8 lb / 4.9 kg Air Usage:... 35 / 110 cfm* Air Inlet:... 1/2 * CFM air consumption readings are static / dynamic at 90 psi. 16 www.eagle-group.com

GVB51P-V60-DW-6 GVB51P-V60-DW PREMIER QUALITY 6 /9 Vertical Grinder 60 100% faster material removal than other grinders on the market Patented Low Friction air motor design Less wear on air motor parts Less susceptible to poor air quality Higher horsepower than competitors Wheel Capacity:... 6 (DW-6) / 9 (DW) Approximate Power:... 4.3 hp RPM - Approximate:... 6,000 Spindle Type:... 5/8-11 Throttle Type:... Safety lever Weight:... 10.8 lb / 4.9 kg Air Usage:... 35 / 110 cfm Air Inlet:... 1/2 * CFM air consumption readings are static / dynamic at 90 psi. Introducing the Premier Series of Pneumatic Grinders for High-Horsepower Metal Removal Advanced patented air motor design creates the optimum combination of power-to-weight and pedalto-the-metal longevity matched to the environment in which it's used. Premier provides the best for high-horsepower working environments with the GTB Turbine grinder series and GAB/GDB/GVB Vaned Bearing Motor grinder series. One is lube-free by design, the other by choice. GTB Series Turbine Motor Design 60 100% faster material removal than other grinders on the market Lower sensitivity to air-hose pressure variation Lower vibration levels Oil-free operation ensures a clean surface and is environmentally friendly Ergonomic shape for easy control and less operator fatigue Low maintenance cost GAB/GDB/GVB Series Vaned Bearing Motor Design Rotating Air Motor Cylinder and End Plates create minimal wear on air motor vanes, cylinder, and plates for fewer repairs and less downtime Drag-free motor speed increases working power both under load and over time for maximum productivity www.eagle-group.com 17

NOTES 18 www.eagle-group.com

SANDERS Angle Sanders / Polisher.... 20-21 Orbital Sanders... 21 Jitterbug Sander... 22 High Speed Sander... 22 Belt Sanders... 22-23 Board Sander... 23 P O W E R T O O L S O L U T I O N S

SANDERS 6115EC 6133EC 2 Angle Orbital Composite Sander, 105 Lightweight and durable Pad Size: 2 Diameter, M6 x 1.0 thread, yellow polyurethane foam pad, hooked Velcro face Orbital Capacity: 0.2 / 3.0 mm 2 Composite Angle Sander, 90 Lightweight and durable Ergonomic composite housing with a soft comfortable grip Less noise, vibration, and thermal transfer than aluminum tools Roll lock abrasive holder Pad Size:... 2 diameter RPM - Approximate:... 15,000 Spindle:... 1/4-20 Weight:... 1.36 lb / 0.62 kg Length:... 6.75 in / 171 mm Air Usage:... 12 cfm Sanding Disc:... 2 Pad Size:... 1.75 diameter RPM - Approximate:... 15,000 Spindle:... 1/4-20 Weight:... 1.05 lb / 0.48 kg Length:... 6.75 in / 171 mm Air Usage:... 12 cfm 6134EC 6012 2 Composite Angle Sander, 105 Lightweight and durable Ergonomic composite housing with a soft comfortable grip Less noise, vibration, and thermal transfer than aluminum tools Roll lock abrasive holder Sanding Disc:... 2 Pad Size:... 1.75 diameter RPM - Approximate:... 15,000 Weight:... 1.05 lb / 0.48 kg Length:... 6.75 in / 171 mm Air Usage:... 12 cfm 7 Angle Sander Powerful 1 hp motor Dead handle mounts either side Hardened and ground spiral bevel gears for long life For heavy rust removal, sanding and shaping of filler patches Pad Size:... 7 RPM - Approximate:... 4,500 Approximate Power:... 1.00 hp Weight:... 6.0 lb /2.7 kg Length:... 15 in / 381 mm Air Usage:... 19 cfm 20 www.eagle-group.com

SANDERS 6507 6905EC 7 Angle Polisher Built-in power regulator Dead handle for easy control Ideal for buffing and polishing paint and metal to a professional finish Pad Size:... 7 RPM - Approximate:... 2,500 Weight:... 6.5 lb / 2.9 kg Length:... 18.0 in / 457 mm Air Usage:... 12 cfm 5 Composite Random Orbital Sander Vibration absorbing grip High power and lightweight PSA pad type Orbital action assures swirl-free finish For touch-up, feather-edging, sanding, pre-paint preparation Pad Size:... 5 RPM - Approximate:... 12,000 Orbit:... 3/16 pattern Weight:... 2.0 lb / 0.9 kg Length:... 6.9 in / 175 mm Air Usage:... 15 cfm Air Inlet:... 1/4 6906EC 6005 6 Composite Random Orbital Sander Vibration absorbing grip High power and lightweight PSA pad type Orbital action assures swirl-free finish For touch-up, feather-edging, sanding, pre-paint preparation Pad Size:... 6 RPM - Approximate:... 12,000 Orbit:... 3/16 pattern Weight:... 2.0 lb / 0.9 kg Length:... 6.9 in / 175 mm Air Usage:... 15 cfm 6 Dual Action Orbital Sander Dual action Built-in regulator Insulated grip Lightweight all aluminum body construction For touch-up, feather-edging, sanding, pre-paint preparation Pad Size:... 6 RPM - Approximate:... 10,000 Orbit:... 5/16 pattern Weight:... 5.2 lb / 2.1 kg Length:... 12.0 in / 305 mm Air Usage:... 16 cfm www.eagle-group.com 21

SANDERS 6009 6113 Jitterbug Sander Durable construction For wet and dry sanding For wood, metal, or plastic finishing, and fiberglass 3-5 High Speed Sander Lightweight, compact design Includes 3 & 5 backing pads Built-in regulator to control speed For paint removal, shaping filler patches, weld smoothing, rust removal. Pad Size:... 3.5 x 7.75 in / 89 x 197 mm RPM - Approximate:... 8,000 Weight:... 4.3 lb / 2.0 kg Length:... 8.0 in / 203 mm Air Usage:... 15 cfm Pad Size:... 3 & 5 RPM - Approximate:... 18,000 Spindle:... 3/8 Weight:... 2.4 lb /1.1 kg Length:... 4.6 in / 117 mm Air Usage:... 19 cfm 6114 6115 3/8 x 13 Belt Sander 1/2 x 24 Belt Sander Best for sanding confined areas and curved surfaces Adjustable sanding belt rotates to allow easy handling Quick-change belt replacement system Best for sanding confined areas and curved surfaces Adjustable sanding belt rotates to allow easy handling Quick-change belt replacement system Belt Size:... 3/8 x 13 in / 10 x 305 mm RPM - Approximate:... 16,000 Approximate Power:... 0.33 hp Weight:... 1.7 lb / 0.8 kg Length:... 10.5 in / 267 mm Air Usage:... 14 cfm Belt Size:... 1/2 x 24 in / 13 x 610 mm RPM - Approximate:... 16,000 Approximate Power:... 0.33 hp Weight:... 1.7 lb / 0.8 kg Length:... 23.5 in / 597 mm Air Usage:... 14 cfm 22 www.eagle-group.com

SANDERS 6116 6017 3/4 x 20.5 Belt Sander Best for sanding confined areas and curved surfaces Adjustable sanding belt rotates to allow easy handling Quick-change belt replacement system. Belt Size:... 3/4 x 20.5 in / 20 x 520 mm RPM - Approximate:... 16,000 Approximate Power:... 0.40 hp Weight:... 3.1 lb / 1.4 kg Length:... 11.9 in / 302 mm Air Usage:... 18 cfm Two Piston Board Sander Two handle design Smooth feathers; dual pistons provide efficient power and prevent stalling For all types of surface preparation and rapid removal of material from large areas Pad Size:... 2.5 x 15.75 in / 63 x 400 mm RPM - Approximate:... 3,300 Approximate Power:... 0.75 hp Weight:... 6.87 lb /3.0 kg Length:... 16.0 in / 406 mm Air Usage:... 9 cfm www.eagle-group.com 23

NOTES 24 www.eagle-group.com

IMPACT WRENCHES Clutch Information Chart... 26 3/8 Impact Wrenches.... 27 1/2 Impact Wrenches.... 27-28 3/4 Impact Wrenches....29 1 Impact Wrenches... 30-31 1 1/2 Impact Wrench... 31 P O W E R T O O L S O L U T I O N S

IMPACT WRENCH TYPES Clutch Information Chart 2450 1 Impact Wrench page 30 TOOL TYPE: USES: Single Hammer l Delivers high torque-to-weight ratio. l Standard assembly l Automotive repair l Light industrial use Twin Hammer l Reliable system producing torque quickly with two forged hammers. l Industrial maintenance l Tire service Pin Clutch l Rapid delivery of torque. l High power-to-weight ratio. l Maintenance l Light assembly l Hard joints Swing Hammer Clutch l Rapid delivery of torque. l Simple, effective design. l Standard assembly applications l Maintenance l Hard joints 26

IMPACT WRENCHES 2010 2150 3/8 Butterfly Inline Impact Wrench Single hammer design Air inlet swivels 360 for easy maneuvering For bench work, carburetors, ignitions, body panels, transmissions, fender struts, oil pans, and small engine work Butterfly throttle allows one-hand directional changes Drive Size:... 3/8 RPM - Approximate:... 10,000 Torque Range - Approximate:... 11-75 ft-lb / 15-102 Nm Max Torque:... 92 ft-lb / 125 Nm Weight:... 2.8 lb / 1.3 kg Length:... 6.4 in / 163 mm Air Usage:... 13 cfm l Approximate Working Torque - 75 ft-lb 3/8 Impact Wrench Twin hammer design Steel clutch housing protects hammer mechanism Fast cycle times Long life For general industrial use Drive Size:... 3/8 RPM - Approximate:... 10,000 Torque Range - Approximate:... 100-145 ft-lb / 136-197 Nm Max Torque:... 199 ft-lb / 270 Nm Weight:... 3.3 lb / 1.5 kg Length:... 6.0 in / 152 mm Air Usage:... 13 cfm l Approximate Working Torque - 145 ft-lb 2225 2225L 2260 2260L 1/2 Impact Wrench 1/2 Impact Wrench Metal housing for durability Twin hammer design Compact size for tight access Handle exit exhaust 2225 with standard anvil 2225L with extended length anvil Engineered for the aftermarket automotive industry Pin clutch design to quickly deliver torque 2260 with standard anvil 2260L with 2-1/2 extended anvil Drive Size:... 1/2 RPM - Approximate:... 8,000 Torque Range - Approximate:... 190-328 ft-lb / 257-445 Nm Max Torque:... 365 ft-lb / 495 Nm Weight:... 5.6 lb / 2.5 kg Length:... 7.25 in / 184 mm Air Usage:... 15 cfm l Approximate Working Torque - 328 ft-lb Drive Size:... 1/2 RPM - Approximate:... 7,500 Torque Range - Approximate:... 114-260 ft-lb / 154-352 Nm Max Torque:... 302 ft-lb / 409 Nm Weight:... 6.15 lb / 2.8 kg Length:... 7.5 in / 194 mm Air Usage:... 12 cfm l Approximate Working Torque - 260 ft-lb www.eagle-group.com 27

IMPACT WRENCHES 2256 1/2 Impact Wrench 2240 2240PEC 1/2 Composite Impact Wrench Twin hammer design Handle exhaust directs air away Steel casing Drive Size:... 1/2 RPM - Approximate:... 7,000 Torque Range - Approximate:... 240-395 ft-lb / 325-535 Nm Max Torque:... 425 ft-lb / 575 Nm Weight:... 5.8 lb / 2.6 kg Length:... 7.5 in / 190 mm Air Usage:... 15 cfm l Approximate Working Torque - 395 ft-lb Composite and lightweight housing Twin hammer design Swivel air inlet fitting Unique motor set design eliminates power loss Noise reducing exhaust design for quiet operation 2240PEC Pinned Anvil Drive Size:... 1/2 RPM - Approximate:... 8,000 Torque Range - Approximate:... 100-410 ft-lb / 135-550 Nm Max Torque:... 450 ft-lb / 600 Nm Weight:... 4.9 lb / 2.3 kg Length:... 8.3 in / 208 mm Air Usage:... 18 cfm l Approximate Working Torque - 410 ft-lb 2263EC 2263PEC 1/2 Composite Impact Wrench 2377 3/4 Impact Wrench Twin hammer design Swivel air inlet fitting Large easy-to-use forward reverse switch Bottom grease fitting Composite housing Twin hammer design Handle exhaust directs air away Feathering trigger for ultimate control 2263PEC Pinned Anvil Drive Size:... 1/2 RPM - Approximate:... 7,800 Torque Range - Approximate:... 210-295 ft-lb / 284-400 Nm Max Torque:... 333 ft-lb / 452 Nm Weight:... 4.5 lb / 2.0 kg Length:... 8.2 in / 208 mm Air Usage:... 19 cfm l Approximate Working Torque - 295 ft-lb Drive Size:... 3/4 RPM - Approximate:... 5,000 Torque Range - Approximate:... 230-1,065 ft-lb / 310-1,450 Nm Max Torque:... 1,250 ft-lb / 1, 695 Nm Weight:... 8.05 lb / 3.6 kg Length:... 8.75 in / 222 mm Air Usage:... 19 cfm Air Inlet:... 1/2 l Approximate Working Torque - 1,065 ft-lb 28 www.eagle-group.com

IMPACT WRENCHES 2004 2485L 3/4 Impact Wrench Single hammer design Built-in regulator Available with extended anvil 1 Inline Impact Wrench, Extended Swing hammer clutch design for low vibration Extended anvil for optimal access on deep wheels and applications Drive Size:... 3/4 RPM - Approximate:... 5,000 Torque Range - Approximate:... 145-500 ft-lb / 196-746 Nm Max Torque:... 600 ft-lb / 815 Nm Weight:... 10.5 lb / 4.8 kg Length:... 9.5 in / 241 mm Air Usage:... 28 cfm Air Inlet:... 3/8 l Approximate Working Torque - 550 ft-lb Drive Size:... 1 RPM - Approximate:... 4,000 Torque Range - Approximate:... 833-1,875 ft-lb / 1,130-2,542 Nm Max Torque:... 2,290 ft-lb / 3,100 Nm Weight:... 28 lb / 12.7 kg Length:... 19 in / 482 mm Air Usage:... 30 cfm Air Inlet:... 1/2 l Approximate Working Torque - 1,875 ft-lb 2463 2403L 1 Impact Wrench, Extended Twin hammer design Steel clutch housing protects hammer mechanism For tire changing on trucks and buses 1 Inline Impact Wrench, Extended Composite housing reduces weight Extended anvil Twin hammer design Swivel exhaust Drive Size:... 1 RPM - Approximate:... 3,900 Torque Range - Approximate:... 670-1,300 ft-lb / 908-1,760 Nm Max Torque:... 1,600 ft-lb / 2,169 Nm Weight:... 20.2 lb / 9.0 kg Length:... 22.0 in / 559 mm Air Usage:... 26 cfm Air Inlet:... 1/2 l Approximate Working Torque - 1,300 ft-lb Drive Size:... 1 RPM - Approximate:... 4,000 Torque Range - Approximate:... 1,250-1,875 ft-lb / 1,695-2,550 Nm Max Torque:... 2,000 ft-lb / 2,825 Nm Weight:... 21.3 lb / 9.7 kg Length:... 23 in / 584 mm Air Usage:... 25 cfm Air Inlet:... 1/2 l Approximate Working Torque - 1,875 ft-lb www.eagle-group.com 29

IMPACT WRENCHES 2450 2450L 1 Inline Impact Wrench Twin hammer design Smooth power in a compact, lightweight design 2450 with standard 3 anvil 2450L with 6 extended anvil 2550 1 1/2 Inline Impact Wrench Efficient power to weight ratio Swing hammer clutch Drive Size:... 1 RPM - Approximate:... 6,000 Torque Range - Approximate:... 940-1,450 ft-lb / 1,274-1,965 Nm Max Torque:... 1,600 ft-lb / 2,169 Nm Weight:... 19 lb / 8.5 kg Length:... 19.5 in / 495 mm Air Usage:... 26 cfm Air Inlet:... 1/2 l Approximate Working Torque - 1,450 ft-lb Drive Size:... 1 1/2 RPM - Approximate:... 2,500 Torque Range - Approximate:... 2,100-3,200 ft-lb / 2,847-4,338 Nm Max Torque:... 3,500 ft-lb /4,745 Nm Weight:... 50 lb / 23 kg Length:... 20 in / 508 mm Air Usage:... 75 cfm Air Inlet:... 1/2 l Approximate Working Torque - 3,200 ft-lb 30 www.eagle-group.com

RATCHET WRENCHES Ratchet Wrenches................................ P O W E R T O O L S O L U T I O N S 32-33

RATCHET WRENCHES 3115 3100 1/4 Ratchet Wrench 3/8 Ratchet Wrench Rear exhaust with silencer Extended ratchet housing for greater reach For smaller fasteners Ball & needle bearing construction for long life Internal ring gear with three planetary gears Drive Size:... 1/4 RPM - Approximate:... 230 Torque - Approximate:... 18 ft-lb / 24 Nm Weight:... 1.4 lb / 0.6 kg Length:... 8.0 in / 203 mm Air Usage:... 10 cfm l Approximate Working Torque - 18 ft-lb Drive Size:... 3/8 RPM - Approximate:... 160 Torque - Approximate:... 24 ft-lb / 33 Nm Weight:... 2.6 lb / 1.2 kg Length:... 10.5 in / 267 mm Air Usage:... 16 cfm l Approximate Working Torque - 24 ft-lb 3105 3205 1/2 Ratchet Wrench 3/8 Ratchet Wrench Excellent for general purpose use Improved gear head extends life Power for tough jobs Composite grip for increased operator comfort Built-in grease fitting for lubrication ease Drive Size:... 1/2 RPM - Approximate:... 150 Torque - Approximate:... 55 ft-lb / 74 Nm Weight:... 3.1 lb / 1.4 kg Length:... 14.5 in / 368 mm Air Usage:... 21 cfm Air Inlet:... 1/4 l Approximate Working Torque - 55 ft-lb Drive Size:... 3/8 RPM - Approximate:... 160 Torque - Approximate:... 30 ft-lb / 40 Nm Weight:... 2.5 lb / 1.1 kg Length:... 10.5 in / 267 mm Air Usage:... 18 cfm l Approximate Working Torque - 30 ft-lb 32 www.eagle-group.com

RATCHET WRENCHES 3120 3220 1/4 Ratchet Wrench 3/8 Ratchet Wrench Rear exhaust with silencer For smaller fasteners Patented head design for increased durability Composite grip for increased operator comfort Built-in grease fitting for lubrication ease Patented head design for increased durability Drive Size:... 1/4 RPM - Approximate:... 250 Torque - Approximate:... 20 ft-lb / 27 Nm Weight:... 1.5 lb / 0.7 kg Length:... 8.1 in / 205 mm Air Usage:... 2.8 cfm l Approximate Working Torque - 20 ft-lb Drive Size:... 3/8 RPM - Approximate:... 280 Torque - Approximate:... 80 ft-lb / 108.8 Nm Weight:... 2.7 lb / 1.2 kg Length:... 10.9 in / 277 mm Air Usage:... 4 cfm l Approximate Working Torque - 80 ft-lb 3320 1/2 Ratchet Wrench Excellent for general purpose use Improved gear head extends life Power for tough jobs Patented head design for increased durability Drive Size:... 1/2 RPM - Approximate:... 280 Torque - Approximate:... 80 ft-lb / 108.8 Nm Weight:... 2.7 lb / 1.2 kg Length:... 10.9 in / 277 mm Air Usage:... 4 cfm Air Inlet:... 1/4 l Approximate Working Torque - 80 ft-lb www.eagle-group.com 33

NOTES 34 www.eagle-group.com

FASTENING TOOLS Clutch Selection Information... 36 Stall Screwdrivers... 37 Adjustable Clutch Screwdriver... 38 Positive Clutch Screwdrivers.... 38 Impact Screwdrivers... 38-39 Torque Controlled Screwdrivers... 39-43 Auditor TM Torque Cube TM Testers.... 43 P O W E R T O O L S O L U T I O N S

CLUTCH SELECTION INFORMATION 1102 Adjustable Clutch Screwdriver page 38. Application Selection Chart TOOL TYPE: USES: KEY BENEFITS: Auto Shut-off: l Clutch with internal cam shuts off instantly upon reaching a preset torque level. l Precise torque control. l General assembly l Critical applications l All joint types l High production l Torque control l Low maintenance l Fast cycle times l Low Noise Adjustable Clutch: l Clutch that ratchets upon reaching torque. l General torque control. l General assembly l Woodworking l Wide torque range l High torque output l High speed Positive Clutch: l Clutch that ratchets upon reaching torque. l Operator can increase torque output with forward/downward pressure. Stall: l Air motor stalls out upon reaching torque. l Torque proportionate to air pressure setting. Impact: l Twin Hammer Impact mechanism. l General assembly l High prevailing torque l Woodworking l Soft joints l Woodworking l Soft joints l Sheet metal screws l Industrial maintenance l Tire service l Heavy assembly l Can provide higher rundown torque than seated torque l Wide torque range l Small, light tool l Simple maintenance l Torque adjusted by air pressure l Fast cycle times 36 www.eagle-group.com

FASTENING TOOLS 1105 1101 Stall Screwdriver Stall Screwdriver 1/4 quick change chuck High power-to-weight ratio Side trigger reverse lever Motor stalls when fastener torque resistance overcomes the power of the air motor 1/4 quick change chuck High power-to-weight ratio Motor stalls when fastener torque resistance overcomes the power of the air motor Hex Drive Size:... 1/4 RPM - Approximate:... 800 Torque Output :... 60 in-lb / 69 kgf-cm Weight:... 1.5 lb / 0.7 kg Length:... 5.1 in / 130 mm Air Usage:... 14 cfm Hex Drive Size:... 1/4 RPM - Approximate:... 1,800 Torque Range - Approximate:... 10-45 in-lb / 11.5-51.8 kgf-cm Weight:... 3.0 lb / 1.4 kg Length:... 7.0 in / 178 mm Air Usage:... 16 cfm 7P-0620-1 7P-1028-1 Stall Screwdriver Stall Screwdriver Reversible bar on both sides enables one-hand operation Industrial-grade quick change chuck 3 Planet industrial-strength gear train provides durability for heavy duty applications Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 1/4 Quick Change Max Torque:... 45 in-lb RPM - Approximate:... 2,000 Weight:... 2.3 lb / 1 kg Length:... 8.5 in / 216 mm Air Usage:... 4 cfm Noise Level:... 88 db(a) Reversible bar on both sides enables one-hand operation Industrial-grade quick change chuck 3 Planet industrial-strength gear train provides durability for heavy duty applications Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 1/4 Quick Change Max Torque:... 32 in-lb RPM - Approximate:... 2,800 Weight:... 2.4 lb / 1.2 kg Length:... 9.2 in / 234 mm Air Usage:... 4 cfm Noise Level:... 88 db(a) www.eagle-group.com 37

FASTENING TOOLS 1102 1115 Adjustable Clutch Screwdriver Cushion clutch Handle exhaust directs air away Convenient forward/reverse valve Positive Clutch Screwdriver 1/4 quick change chuck High power -to-weight ratio For wood and general assembly Hex Drive Size:... 1/4 RPM - Approximate:... 1,800 Torque Range - Approximate:... 55-160 in-lb / 63-184 kgf-cm Weight:... 2.6 lb / 1.2 kg Length:... 8.8 in / 222 mm Air Usage:... 16 cfm Hex Drive Size:... 1/4 RPM - Approximate:... 1,800 Torque Output :... 475 in-lb / 547 kgf-cm Weight:... 2.6 lb / 1.2 kg Length:... 8.0 in / 203 mm Air Usage:... 16 cfm 1121 1550 Positive Clutch Screwdriver 1/4 quick change chuck High power-to-weight ratio For wood and general assembly Sand cast housing Twin Hammer Impact Screwdriver No torque reaction Fast efficient tightening tool High power-to-weight ratio Hex Drive Size:... 1/4 RPM - Approximate:... 1,800 Torque Output :... 415 in-lb / 478 kgf-cm Weight:... 2.5 lb / 1.1 kg Length:... 6.8 in / 171 mm Air Usage:... 16 cfm Hex Drive Size:... 1/4 RPM - Approximate:... 10,500 Torque Range - Approximate:... 10-31 ft-lb / 13.6-42.2 Nm Weight:... 1.2 lb / 0.55 kg Length:... 6.8 in / 173 mm Air Usage:... 2.5 cfm 38 www.eagle-group.com

FASTENING TOOLS 1555 1577 Twin Hammer Impact Screwdriver Lightweight No torque reaction Fast rundown speed Hex Drive Size:... 1/4 RPM - Approximate:... 13,000 Torque Range - Approximate:... 47-58 ft-lb / 63-78 Nm Weight:... 1.6 lb / 0.7 kg Length:... 6.38 in / 162 mm Air Usage:... 4 cfm Impact Screwdriver 7 vane high speed motor Totally enclosed pinless impact mechanism with advanced heat treatment Tease throttle with 4-stop regulator for speed control and torque output 360 adjustable rear exhaust. Detachable belt clip Hex Drive Size... 1/4 Torque Range:... 41-77 ft-lb / 56-105 Nm RPM - Approximate:... 10,000 Weight:... 2.3 lb / 1.04 kg Length:... 6.5 in / 165 mm INLINE REGULATORS: see page 64 for part numbers and specifications. EPTS-33011-25Q EPTS-33017-25Q Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 9.7-18.5 in-lb / 1.1-2.1 Nm RPM - Approximate:... 1,100 Weight:....9 lb /.4 kg Length:... 7.4 in / 187 mm Air Usage:... 7 cfm Noise Level... 70 db(a) Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 6.2-13.2 in-lb / 0.7-1.5 Nm RPM - Approximate:... 1,700 Weight:....9 lb /.4 kg Length:... 7.4 in / 187 mm Air Usage:... 7 cfm Noise Level... 70 db(a) www.eagle-group.com 39

FASTENING TOOLS EPTS-33023-25Q EPTS-34008-25Q Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 3.5-13.2 in-lb / 0.4-1.5 Nm RPM - Approximate:... 2,300 Weight:....9 lb /.4 kg Length:... 7.4 in / 187 mm Air Usage:... 7 cfm Noise Level... 71 db(a) Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 14.1-35.2 in-lb / 1.6-4 Nm RPM - Approximate:... 800 Weight:... 1.4 lb /.7 kg Length:... 8.2 in / 209 mm Air Usage:... 10.5 cfm Noise Level... 70 db(a) EPTS-34015-25Q EPTS-34021-25Q Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 9.7-23 in-lb / 1.1-2.6 Nm RPM - Approximate:... 1,500 Weight:... 1.4 lb /.7 kg Length:... 8.2 in / 209 mm Air Usage:... 10.5 cfm Noise Level... 70 db(a) Torque Range:... 6.2-19.4 in-lb /0.7-2.2 Nm RPM - Approximate:... 2,100 Weight:... 1.4 lb /.7 kg Length:... 8.2 in / 209 mm Air Usage:... 10.5 cfm Noise Level... 74 db(a) 40 www.eagle-group.com

FASTENING TOOLS EPTS-33011P-25Q EPTS-33017P-25Q Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 8.85-19.9 in-lb / 1-2.25 Nm RPM - Approximate:... 1,100 Weight:....9 lb /.4 kg Length:... 7.4 in / 187 mm Air Usage:... 7 cfm Noise Level... 70 db(a) Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 9.73-15.5 in-lb /1.1-1.75 Nm RPM - Approximate:... 1,700 Weight:....9 lb /.4 kg Length:... 7.4 in / 187 mm Air Usage:... 7 cfm Noise Level... 70 db(a) EPTS-33023P-25Q EPTS-34008P-25Q Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 10.2-17.7 in-lb / 1.15-2 Nm RPM - Approximate:... 2,300 Weight:....9 lb /.4 kg Length:... 7.4 in / 187 mm Air Usage:... 7 cfm Noise Level... 71 db(a) Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 14.2-33.2 in-lb / 1.6-3.75 Nm RPM - Approximate:... 800 Weight:... 1.4 lb /.7 kg Length:... 8.2 in / 209 mm Air Usage:... 10.5 cfm Noise Level... 70 db(a) www.eagle-group.com 41

FASTENING TOOLS EPTS-34015P-25Q EPTS-34021P-25Q Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 8.85-26.6 in-lb / 1-3 Nm RPM - Approximate:... 1,500 Weight:... 1.4 lb /.7 kg Length:... 8.2 in / 209 mm Air Usage:... 10.5 cfm Noise Level... 70 db(a) Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 10.6-24.3 in-lb /1.2-2.75 Nm RPM - Approximate:... 2,100 Weight:... 1.4 lb /.7 kg Length:... 8.2 in / 209 mm Air Usage:... 10.5 cfm Noise Level... 74 db(a) EPTS-35005P-25Q EPTS-35008P-25Q Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 44-92.4 in-lb / 5-10.5 Nm RPM - Approximate:... 500 Weight:... 2.2 lb / 1 kg Length:... 9.5 in / 241 mm Air Usage:... 17.5 cfm Noise Level... 74 db(a) Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 26.4-48.4 in-lb / 3-5.5 Nm RPM - Approximate:... 800 Weight:... 2.2 lb / 1 kg Length:... 9.5 in / 241 mm Air Usage:... 17.5 cfm Noise Level... 75 db(a) 42 www.eagle-group.com

FASTENING TOOLS EPTS-35017P-25Q Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 9.7-23 in-lb / 1.5-2.6 Nm RPM - Approximate:... 1700 Weight:... 2.2 lb / 1 kg Length:... 9.5 in / 241 mm Air Usage:... 17.5 cfm Noise Level... 75 db(a) EPTS-N34003-25 EPTS-N34003-38 Torque Controlled Pneumatic Screwdriver Long lasting clutch design 2,000,000 cycle tested Quick shut off clutch Accurate torque delivery Simple torque adjustment Great power to weight for best ergonomics Torque Range:... 9-110 in-lb / 1-12 Nm RPM - Approximate:... 300 Weight:... 2.4 lb / 1.08 kg Length:... 14.5 in / 368 mm Air Usage:... 17.5 cfm Noise Level... 75 db(a) Available in 1/4 (EPTS-N34003-25) and 3/8 (EPTS-N34003-38) Square Drive 5105 AUDITOR TM TORQUE CUBE TM DIGITAL TORQUE TESTERS Simple, easy to use, portable tester Intuitive Auditor Series menu structure for quick start up Bidirectional accuracy of ±1% of indicated reading within top 90% of full scale Eight (8) available engineering units: oz-in, lbf-in, lbf-ft, Nm, Ncm, kgf-cm, gf-cm, kgf-m Three modes of operation: Track, Peak and 1st Peak Selectable power tool filtering: 125Hz, 250Hz, 500Hz, 1000Hz and 1500Hz Serial data output NiMh rechargeable batteries provide a minimum of 8-10 hours of continuous use For testing of power tools, click, dial and digital wrenches Data storage 999 readings ATCE-100 RECOMMENDED TORQUE RANGE WEIGHT W X H X D W X H X D MODEL IN-LB NM LB KG MM IN ATCE-25 2.5-25.28-2.8 2.5 1.13 79 x 95 x 83 3.13 x 3.75 x 3.25 ATCE-100 10.0-100 1.3-11.3 2.5 1.13 79 x 95 x 83 3.13 x 3.75 x 3.25 www.eagle-group.com 43

NOTES 44 www.eagle-group.com

DRILLS Drills... 46-51 P O W E R T O O L S O L U T I O N S

DRILLS 7005 7110 1/4 Pistol Drill, Reversible Compact size Easy reach reverse selector Equipped with Jacobs Chuck Bottom handle exhaust 3/8 Pistol Drill, Reversible Compact size Easy reach reverse selector 3/8 Jacobs Chuck Bottom handle exhaust Chuck Capacity:... 1/4 RPM - Approximate:... 1,800 Weight:... 1.8 lb / 0.8 kg Length:... 7.2 in / 184 mm Air Usage:... 13.7 cfm Chuck Capacity:... 3/8 RPM - Approximate:... 1,800 Weight:... 1.8 lb / 0.8 kg Length:... 7.2 in / 184 mm Air Usage:... 13.7 cfm 7100 7650 3/8 Inline Drill, Non-Reversible Inline design for tight space applications Ribbed steel housing for better grip 3/8 Angle Drill, Reversible For general purpose drilling in confined areas Convenient forward/reverse button Rear exhaust Equipped with Jacobs Chuck Chuck Capacity:... 3/8 RPM - Approximate:... 1,500 Weight:... 2.3 lb / 1.0 kg Length:... 9.0 in / 229 mm Air Usage:... 16 cfm Chuck Capacity:... 3/8 RPM - Approximate:... 1,500 Weight:... 2.3 lb / 1.0 kg Length:... 8.3 in / 211 mm Air Usage:... 14 cfm 46 www.eagle-group.com

DRILLS 7102 7107 3/8 Pistol Drill, Reversible Positive action trigger controls speed. For drilling, counter sinking, and wire brushing 3/8 Pistol Drill, Non-Reversible Positive action trigger controls speed For drilling, counter sinking, and wire brushing Chuck Capacity:... 3/8 RPM - Approximate:... 1,800 Weight:... 3.0 lb / 1.4 kg Length:... 7.0 in / 178 mm Air Usage:... 16 cfm Chuck Capacity:... 3/8 RPM - Approximate:... 2,600 Weight:... 4.0 lb / 1.8 kg Length:... 7.0 in / 178 mm Air Usage:... 20 cfm 7105 7106 1/2 Pistol Drill, Non-Reversible Positive action trigger controls speed For drilling, counter sinking, and wire brushing 1/2 Pistol Drill, Reversible Positive action trigger controls speed For drilling, counter sinking, and wire brushing Chuck Capacity:... 1/2 RPM - Approximate:... 500 Weight:... 4.0 lb / 1.8 kg Length:... 7.0 in / 178 mm Air Usage:... 20 cfm Chuck Capacity:... 1/2 RPM - Approximate:... 800 Weight:... 4.0 lb / 1.8 kg Length:... 7.0 in / 178 mm Air Usage:... 20 cfm Air Inlet:... 1/4 www.eagle-group.com 47

DRILLS 714P-2100R 738P-3200 1/4 Pistol Drill, Reversible Precision machined gears Robust sand cast housing Steel front end Ergonomic handle design Equipped w/jacobs Chuck Variable speed trigger Muffled directional rear exhaust Chuck Capacity:... 1/4 RPM - Approximate:... 2,100 Weight (w/chuck):... 1.6 lb / 0.73 kg Length:... 6.87 in / 175 mm 3/8 Pistol Drill, Non-Reversible Precision machined gears Robust sand cast housing Steel front end Ergonomic handle design Equipped w/jacobs Chuck Variable speed trigger Muffled directional rear exhaust Chuck Capacity:... 3/8 RPM - Approximate:... 3,200 Weight:... 2.65 lb / 1.20 kg Length:... 7.25 in / 184 mm 712P-5100 712P-420 1/2 Pistol Drill, Non-Reversible Precision machined gears Robust sand cast housing Steel front end Ergonomic handle design Equipped w/jacobs Chuck Variable speed trigger Muffled directional rear exhaust Chuck Capacity:... 1/2 RPM - Approximate:... 5,100 Weight:... 2.35 lb / 1.07 kg Length:... 7.12 in / 181 mm 1/2 Pistol Drill, Non-Reversible Precision machined gears Robust sand cast housing Steel front end Ergonomic handle design Equipped w/jacobs Chuck Variable speed trigger Muffled directional rear exhaust Chuck Capacity:... 1/2 RPM - Approximate:... 420 Weight:... 2.95 lb / 1.34 kg Length:... 8.5 in / 216 mm 48 www.eagle-group.com

DRILLS 7P-0620-2 7P-0620-4 1/4 Pistol Drill, Reversible Reversible bar on both sides enables one-hand operation Industrial-grade chuck 3 Planet industrial-strength gear train provides durability for heavy duty drilling Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 1/4 Keyed RPM - Approximate:... 2,000 Weight:... 2.3 lb / 1 kg Length:... 8.5 in / 216 mm 3/8 Pistol Drill, Reversible Reversible bar on both sides enables one-hand operation Industrial-grade chuck 3 Planet industrial-strength gear train provides durability for heavy duty drilling Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 3/8 Keyed RPM - Approximate:... 2,000 Weight:... 2.3 lb / 1 kg Length:... 8.5 in / 216 mm 7P-0620-5 7P-0620-6 3/8 Pistol Drill, Reversible Reversible bar on both sides enables one-hand operation Industrial-grade chuck 3 Planet industrial-strength gear train provides durability for heavy duty drilling Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 3/8 Keyless RPM - Approximate:... 2,000 Weight:... 2.3 lb / 1 kg Length:... 8.5 in / 216 mm 1/2 Pistol Drill, Reversible Reversible bar on both sides enables one-hand operation Industrial-grade chuck 3 Planet industrial-strength gear train provides durability for heavy duty drilling Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 1/2 Keyed RPM - Approximate:... 2,000 Weight:... 2.3 lb / 1 kg Length:... 8.5 in / 216 mm www.eagle-group.com 49

DRILLS 7P-0620-7 7P-1028-4 1/2 Pistol Drill, Reversible Reversible bar on both sides enables one-hand operation Industrial-grade chuck 3 Planet industrial-strength gear train provides durability for heavy duty drilling Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 1/2 Keyless RPM - Approximate:... 2,000 Weight:... 2.3 lb / 1 kg Length:... 8.5 in / 216 mm 3/8 Pistol Drill, Reversible Reversible bar on both sides enables one-hand operation Industrial-grade chuck 3 Planet industrial-strength gear train provides durability for heavy duty drilling Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 3/8 Keyed RPM - Approximate:... 2,800 Weight:... 2.4 lb / 1.2 kg Length:... 9.2 in / 234 mm 7P-1028-5 7P-1028-6 3/8 Pistol Drill, Reversible Reversible bar on both sides enables one-hand operation Industrial-grade chuck 3 Planet industrial-strength gear train provides durability for heavy duty drilling Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 3/8 Keyless RPM - Approximate:... 2,800 Weight:... 2.4 lb / 1.2 kg Length:... 9.2 in / 234 mm 1/2 Pistol Drill, Reversible Reversible bar on both sides enables one-hand operation Industrial-grade chuck 3 Planet industrial-strength gear train provides durability for heavy duty drilling Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 1/2 Keyed RPM - Approximate:... 2,800 Weight:... 2.4 lb / 1.2 kg Length:... 9.2 in / 234 mm 50 www.eagle-group.com

DRILLS 7P-1028-7 1/2 Pistol Drill, Reversible Reversible bar on both sides enables one-hand operation Industrial-grade chuck 3 Planet industrial-strength gear train provides durability for heavy duty drilling Improved muffler design Comfort-grip handle Spindle with special heat treatment Chuck Capacity:... 1/2 Keyless RPM - Approximate:... 2,800 Weight:... 2.4 lb / 1.2 kg Length:... 9.2 in / 234 mm www.eagle-group.com 51

NOTES 52 www.eagle-group.com

PERCUSSION TOOLS Air Hammers... 54 Chipping Hammers / Needle Scalers... 55-56 Flux Chipper / Scaler/Chipper... 56 Replacement Needles... 56 P O W E R T O O L S O L U T I O N S

PERCUSSION TOOLS 4100 4001 Air Hammer Air Hammer Positive action trigger controls speed Heavy duty spring retainer Chisel sold separately For Use With:... Chisel Chisel Shank... 0.401 Bore:... 0.75 Stroke:... 2.375 BPM - Approximate:... 2,100 Weight:... 3.3 lb / 1.5 kg Length:... 7.8 in / 198 mm Air Usage:... 10 cfm Economical air hammer for fast cutting action For muffler and pipe removal, body shop work, scraping rust, light front-end work For exhaust system, panel cutting, general repair work Includes 6 chisel with 1-3/8 angle blade For Use With:... Chisel Chisel Shank:... 0.401 Bore:... 0.75 Stroke:... 2.625 BPM - Approximate:... 3,500 Weight:... 3.8 lb / 1.7 kg Length:... 6.8 in / 171 mm Air Usage:... 15 cfm 4178 4260 Air Hammer Air Hammer Heavy duty spring retainer Long lasting For front end, exhaust, frame, body work Chisel sold separately Feathering throttle for control Heavy duty spring retainer Riveting applications Chisel sold separately For Use With:... Chisel Chisel Shank:... 0.401 Bore:... 0.75 Stroke:... 3.625 BPM - Approximate:... 2,100 Weight:... 4.3 lb / 2.0 kg Length:... 8.5 in / 216 mm Air Usage:... 12 cfm For Use With:... Chisel Chisel Shank:... 0.498 Bore:... 0.75 Stroke:... 3.750 BPM - Approximate:... 1,800 Weight:... 5.5 lb / 2.5 kg Length:... 7.8 in / 198 mm Air Usage:... 12 cfm 54 www.eagle-group.com

PERCUSSION TOOLS 4009 4010 2 Chipping Hammer 3 Chipping Hammer Drop forged handle Front exhaust Oval collar For paint, scale, rust removal Chisel sold separately Drop forged handle Front exhaust Oval collar For paint, scale, rust removal Chisel sold separately For Use With:... Chisel Chisel Shank:....68 round or.58 hex bushing Bore:... 1.125 Stroke:... 2.0 BPM - Approximate:... 1,900 Weight:... 16.0 lb / 7.3 kg Length:... 15.5 in / 394 mm Air Usage:... 12 cfm Air Inlet:... 1/2 For Use With:... Chisel Chisel Shank:....68 round or.58 hex bushing Bore:... 1.125 Stroke:... 3.0 BPM - Approximate:... 1,700 Weight:... 17.8 lb / 8.1 kg Length:... 16.3 in / 413 mm Air Usage:... 12 cfm Air Inlet:... 1/2 4615 4620 Mini Needle Scaler Straight handle for hard to reach areas 12-piece 3 mm needle set included For rust removal, weld slag, old paint Only 11.5 inches long Needle Scaler Heavy-duty scaler with pistol grip 28-piece 3 mm needle set included For rust removal, weld slag, old paint For Use With:... Needles (9024 or 9043) Needle Diameter:... 12 @ 3 mm each Bore:... 1 Stroke:... 2.375 BPM - Approximate:... 4,000 Weight:... 2.8 lb / 1.3 kg Length:... 11.5 in / 292 mm Air Usage:... 4 cfm For Use With:... Needles (9024 or 9043) Needle Diameter:... 28 @ 3 mm each Bore:... 1 Stroke:... 2.375 BPM - Approximate:... 4,500 Weight:... 8.0 lb / 3.6 kg Length:... 13.8 in / 351 mm Air Usage:... 7 cfm www.eagle-group.com 55

PERCUSSION TOOLS 4005 4004 Needle Scaler Flux Chipper Hardened barrels and strict tolerances for maximum life For foundries, fabrication shops, ship building, and construction Hardened barrels and strict tolerances for maximum life For foundries, fabrication shops, ship building and construction For Use With:... Needles (9024 or 9043) Needle Diameter:... 19 @ 3 mm each Bore:... 1 Stroke:... 1.5 BPM - Approximate:... 4,600 Weight:... 6.2 lb / 2.8 kg Length:... 18.0 in / 457 mm Air Usage:... 12 cfm For Use With:... 7 Angle Chisel (730224C) Chisel Diameter:... 0.401 Bore:... 1 Stroke:... 1.5 BPM - Approximate:... 4,600 Weight:... 5.8 lb / 2.6 kg Length:... 9.8 in / 248 mm Air Usage:... 12 cfm 4005SC Scaler/Chipper 9024 / 9043 Replacement Needles Hardened barrels and strict tolerances for maximum life For rust removal, weld slag, old paint 9024 730224C For Use With:... Needles (9024) Needle Diameter:... 19 @ 3 mm each For Use With:... 7 Angle Chisel (730224C) Chisel Diameter:... 0.498 Bore:... 1 Stroke:... 1.5 BPM - Approximate:... 4,600 Weight:... 6.2 lb / 2.8 kg Length:... 18.0 in / 457 mm Air Usage:... 12 cfm Part Number Length Diameter 9024 7 in / 175 mm 1/8 in / 3.18 mm 9043 5 in / 125 mm 1/8 in / 3.18 mm 9024 and 9043 are suitable for 4005, 4005SC, 4615 and 4620 Sold as individual needles, see tool set requirements. 56 www.eagle-group.com

CUTTING AND SPECIALTY TOOLS Saws / Cut-Off Tools............................... 58-59 Punch / Flange...................................... 59 Blow Guns......................................... 59 Tire Buffers.......................................... 60 P O W E R T O O L S O L U T I O N S

SPECIALTY TOOLS 6050 6080 Reciprocating Saw High performance motor provides aggressive cutting action Insulated handle For cutting plastics, fiberglass, sheet metal SPM - Approximate:... 9,500 Teeth:... 14 / 24 / 32 Stroke:... 10 mm Weight:... 2.2 lb / 1.0 kg Length:... 9.3 in / 236 mm Air Usage:... 7 cfm Low Vibration Reciprocating Saw 35% longer stroke for quicker and thicker material cuts Patented vibration-damped cylinder design decreases vibration emission by 40% Patented blade guard prevents metal filing from entering the inner mechanism Stroke:... 14 mm SPM - Approximate:... 10,000 Length:... 8.9 in / 227 mm Weight:... 1.37 lb / 0.62 kg Air Hose:... 3/8'' Air Usage:... 2.3 cfm Air Inlet:... 1/4'' 5G-10125 6812EC 5 Pneumatic Angle Saw Left/right hand use Governed motor Removable base plate Side to Side: 31 mm from front blade edge to shoe edge Depth Cut Adjustment: Min: 1/8 (3 mm) Max: 1 (12.5 mm) Maximum Blade Diameter... 5 Arbor... 5/8-11 RPM - Approximate:... 12,000 Maximum Blade Exposure:... 0.75 Throttle Type:... Safety Lever Exhaust:... Rear Power... 1.0 hp Length:... 11 / 279 mm Weight:... 3.95 lb / 1.8 kg Air Inlet:... 3/8 BUR5X30X78 Blade sold separately 3 Cut-Off Tool Lightweight and durable Ergonomic composite housing with a soft comfortable grip Less noise, vibration, and thermal transfer than aluminum tools Protective metal guard Maximum Disc Size:... 3 RPM - Approximate:... 20,000 Weight:... 1.7 lb / 0.77 kg Length:... 7.38 in / 187 mm Air Usage:... 3 cfm 58 www.eagle-group.com

SPECIALTY TOOLS 6191 6301 3 Cut-Off Tool Punch/Flange Kit Rear exhaust directs exhaust air away Lock-off throttle prevents accidental start-ups For cutting muffler clamps, use in body shops Maximum Disc Size:... 3 RPM - Approximate:... 24,000 Weight:... 2.0 lb / 0.9 kg Length:... 8.0 in / 203 mm Air Usage:... 10 cfm 360 rotating head adds versatility Saves time compared to manual pliers and punches Maximum thickness of sheet metal up to 1/32 For preparation of welding sheet metal Flange Diameter:... 3/16 Weight:... 2.3 lb / 1.0 kg Length:... 8.5 in / 21.6 cm Air Usage:... 0.24 cfm/cycle 8116 8125 Suction / Blow Gun Blow Gun Reversible nozzle ring creates portable vacuum cleaner Acts as a blow gun on reverse side. Includes two nozzles Comes with bag Capacity:... Tip Accessories:... Weight:... Length:... 6.3 cfm 4 pieces 1.0 lb / 0.4 kg 5.7 in / 144 mm Inexpensive blow gun Oil and acid resistant plastic Long lever for precise control 3 mm nozzle opening 95 mm nozzle length for difficult to reach places Safety slot - 30 PSI maximum at opening Nozzle Opening:... 3 mm Nozzle Length:... 95 mm Weight:... 0.2 lb / 0.1 kg Length:... 8.9 in /226 mm www.eagle-group.com 59

SPECIALTY TOOLS 5114 5070 (high speed) 5075 (low speed) Tire Buffer Tire Buffer Built-in air regulator Quick change chuck Rib textured handle for firm grip Piped away exhaust kit available Includes 7/16 quick change adapter with 3/8-24 male end Hex Drive Size:... 7/16 QC RPM - Approximate:... 2,500 Throttle Type:... Lever Exhaust:... Rear Weight:... 2.5 lb / 1.1 kg Length:... 8.5 in / 216 mm Approximate Power:... 0.50 hp Air Usage:... 17 cfm Specifically designed for recapping, tire scuffing, and roughing Quick change chuck permits rapid change of buffing stones Complete with air hose, exhaust hose, and integral silencer Includes 7/16 Quick Change Adapter with 3/8-24 male end Hex Drive Size:... 7/16 QC RPM - Approximate:... 5070: 19,000 5075: 3,400 Throttle Type:... Safety Lever Exhaust:... Rear Weight:... 2.0 lb / 0.8 kg Length:... 7.8 in / 198 mm Approximate Power:... 0.54 hp Air Usage:... 18 cfm 5072 5077 Tire Buffer Tire Buffer High speed buffer Specifically designed for recapping,tire scuffing, and roughing Complete with air hose, exhaust hose, and integral silencer With 3/8 Jacobs Chuck & key Low speed buffer Specifically designed for recapping, tire scuffing and roughing Complete with air hose, exhaust hose and integral silencer With 3/8 Jacobs Chuck & key Jacob's Chuck Drive Size:... 3/8 RPM - Approximate:... 19,000 Throttle Type:... Safety Lever Exhaust:... Rear Weight:... 2.0 lb / 0.9 kg Length:... 7.8 in / 198 mm Approximate Power:... 0.54 hp Air Usage:... 18 cfm Jacob's Chuck Drive Size:... 3/8 RPM - Approximate:... 3,400 Throttle Type:... Safety Lever Exhaust:... Rear Weight:... 2.0 lb / 0.9 kg Length:... 7.8 in / 198 mm Approximate Power:... 0.54 hp Air Usage:... 18 cfm 60 www.eagle-group.com

ACCESSORIES Torque Wrenches.................................... 62 Balancers......................................... 63 Retractors / FRL Units / Regulators...................... 64 Hoses............................................. 65 Air Fittings / Couplers.............................. 65-66 Sockets / Bits / Mag-O-Nets......................... 67-70 P O W E R T O O L S O L U T I O N S

ACCESSORIES 5105 TORQUE WRENCHES Part # Torque Range Square Drive DW-75 0-75 in-lb 1/4 DW-300 0-300 in-lb 3/8 DW-175F 0-175 ft-lb 1/2 CWR SERIES CLICK WRENCH Part # Torque Range Square Drive CWR -100 40-100 in-lb 1/4 CWR -200 50-200 in-lb 1/4 CWR-250F 30-250 ft-lb 3/4 DW SERIES DIAL INDICATING DW Series Accuracy is ±3% of indicated reading Bi-directional use for clockwise and counter clockwise auditing Light weight tool design and ergonomic grip ensure operator comfort Large dial face allows quick and easy reference Overall length of tool is designed for comfort. Operator can apply torque without undue strain Prevents cosmetic damage to parts. Edges of wrench are covered in soft rubber Fits standard sockets with ¼ - ½ square drive sizes For metric series add A at the end of model number CWR Series Accuracy is ±3% of indicated reading Light weight tool with streamlined design. Operator can apply torque without undue strain due to overall length of tool Fits standard sockets with ¼ - ½ square drive sizes Repeatable and detectable action Micrometer adjustable For Metric Series add A at the end of model number 62 www.eagle-group.com

ACCESSORIES 5105 GRAVITY-DEFYING BALANCERS TW-00 TW-0 TW-0 and TW-00 Series Gravity defying / true balance No tension buildup to cause worker fatigue Easy external direct drive tensioning 360 upper swivel Safety cable provision Tool clip included TW-50 CAPACITY ANTI-GRAVITY MODEL LB KG CAPACITY (LB) CABLE TW-00 1.1-3.3 0.5-1.5 2.5-3.0 18 stranded steel cable 1/8 dia. TW-0 1.1-3.3 0.5-1.5 2.5-3.0 3.3-ft stranded steel cable 1/8 dia.. TW-3 2.2-6.6 1.0-3.0 4.5-6.0 4.3-ft stranded steel cable 5/32 dia. TW-5 5.5-11.0 2.5-5.0 8.0-10.5 4.3-ft stranded steel cable 5/32 dia. TW-9 9.9-19.8 4.5-9.0 15.0-19.0 4.3-ft stranded steel cable 5/32 dia. TW-15 19.8-33.0 9.0-15.0 26.0-32.5 4.3-ft stranded steel cable 5/32 dia. TW-22 33.0-48.4 15-22 41.0-48.0 5-ft stranded steel cable 3/16 dia. TW-30 48.4-66.0 22-30 58.0-65.5 5-ft stranded steel cable 3/16 dia. TW-40 66.0-88.0 30-40 77.5-87.5 5-ft stranded steel cable 3/16 dia. TW-50 88.0-110.0 40-50 100.0-109.5 5-ft stranded steel cable 3/16 dia. TW-60 110.0-132.0 50-60 122.0-131.0 5-ft stranded steel cable 3/16 dia. TW-70 132.0-154.0 60-70 144.0-153.0 5-ft stranded steel cable 3/16 dia. TW-3 through TW-70 Series Tapered drum allows true balance throughout cable travel Easy external direct drive tensioning Cast aluminum casing for durability Permanent lubrication 360 top swivel Enclosed spiral spring for added safety Safety chain provision (TW-3 through TW-15 models) Automatic safety lock plus manual drum lock (TW-22 through TW-70) ASB Series Built-in Safety Features: The cable, drum, and enclosed spring are fully visible without opening the unit for easy and convenient safety checks. The sturdy spiral spring is enclosed for greater control and safety Ergonomic Spring Release: The automatic safety lock provides extra control Extended Cable Length: Stainless steel cables allow for extended reach on applications Enhanced Gear Mechanism: Allows for more exact adjustment of tension No Recoil and Low Resistance: Tapered drum style provides gravity defying tool positioning and low travel ASB-OC Gravity Defying and Hand Adjustable Balancer ASB-3C ASB-5C MODEL CAPACITY STROKE WEIGHT ASB-0C 1.1-3.3 lb 0.5-1.5 kg 51.1 in 130 cm 1.5 lb 0.7 kg ASB-3C 3.3-6.6 lb 1.5-3 kg 86.4 in 220 cm 3.0 lb 1.4 kg ASB-5C 5.5-11 lb 2.5-5 kg 86.4 in 220 cm 3.4 lb 1.5 kg www.eagle-group.com 63

ACCESSORIES 5105 RETRACTORS The reinforced hanging bracket includes provision for a safety cable. A tool clip is included with each retractor. RPA Series No tools needed for setting of tension Five foot nylon coated steel cable Adjustable cable stop Part # Approximate Capacity Stroke RPA-1 0.5-1.5 lb 0.2-0.7 kg 5' (152 cm) RPA-2 1.5-3.0 lb 0.7-1.4 kg 5' (152 cm) RPA-3 3.0-5.0 lb 1.4-2.3 kg 5' (152 cm) RMA-L Series External tension adjustment Ratchet cable lock Steel housing with polyester finish Eight foot x 3/32 coated steel cable Part # Approximate Capacity Stroke RMA-7L 5-10 lb 2.3-4.8 kg 8' (244 cm) RMA-15L 10-15 lb 4.5-6.8 kg 8' (244 cm) RMA-20L 15-23 lb 6.8-10.4 kg 8' (244 cm) 5105 FRL UNITS AFRL-2-C AFRL-3-C Compact FRL 7070 Compact FRL AFRL-4HTA Standalone Unit AFRL-3 AFRL-4 AFRL-8 Full Size FRL In order to increase the life of your tools, we recommend that you install an Eagle filter, regulator and lubricator between the air supply and power tool. Filter: Traps the moisture before it enters the air tool Regulator: Adjusted to the correct air pressure, maintaining consistent performance Lubricator: Allows the proper amount of lubrication needed for top performance MODEL PORT GAUGE PORT FLOW RATE BOWL SHIELD CFM L/MIN AFRL-2 1/4 1/8 70 2,000 yes AFRL-2-C 1/4 1/8 60 1,700 yes AFRL-3 3/8 1/4 140 4,000 yes AFRL-3-C 3/8 1/4 105 3,000 yes AFRL-4 1/2 1/4 140 4,000 yes AFRL-8 1 1/4 180 5,000 yes 5105 INLINE REGULATORS Inline regulators allow easy adjustment of the airflow to each tool with the turn of a dial Installed inline with the air line immediately before the tool's air inlet fitting Part # Description 932-110-0A 1/4 NPT 932-100-0 1/8 NPT 64 www.eagle-group.com

ACCESSORIES 5105 COILED HOSES Durable polyurethane hose Assemblies include reusable swivel fitting Approximate burst pressure 428 PSI @ 68 F Working temperature -104 F to +175 F Ask about full reel pricing Part # OD ID Length ASH-250C-10MSZ 3/8 1/4 10' ASH-250C-15MSZ 3/8 1/4 15 ASH-250C-25MSZ 3/8 1/4 25' ASH-375C-15MSZ 9/16 3/8 10' ASH-375C-25MSZ 9/16 3/8 25' ASH-500C-15MSZ 3/4 1/2 15' ASH-500C-25MSZ 3/4 1/2 25' 5105 STRAIGHT HOSE BY THE FOOT Durable polyurethane hose Excellent recoil memory Maximum flexibility and lightweight Transparent hose color (opaque available) Custom colors available High chemical resistance Part # ASH-250Z ASH-375Z ASH-500Z Inner Diameter 1/4 ID 3/8 ID 1/2 ID 5105 AIR HOSE FITTING Rigid 375-RZ Swivel 375-SZ 500-SZ Provides air hose connections Swivel fitting helps keep hose from twisting Size fitting to hose size and air flow Part # 250-RZ 250-SZ 375-RZ 375-SZ 500-SZ Description 1/4 NPT Rigid 1/4 NPT Swivel 3/8 NPT Rigid 3/8 NPT Swivel 1/2 NPT Swivel 5105 BRASS QUICK COUPLERS B23 B23E B25 Provides simple way of connecting and disconnecting air tools to hose Manual ball couplers designed for use with ergonomic twist plugs. Brass with nitrate seals Rated to 300 PSI, from -40 F to +250 F Size fitting to hose size and air flow Part # B23 B23E B25 Description 1/4 NPT F x 1/4 QC 3/8 NPT F x 1/4 QC 3/8 NPT F x 3/8 QC www.eagle-group.com 65

ACCESSORIES 5105 ERGONOMIC SWIVEL COUPLERS TS-30NP-2NPT TS-20NP-2NPT Part # TS-30NP-2NPT TS-20NP-2NPT TS-20US-2NPT TS-30US-3NPT Description 3/8 NPT Female x 1/4 NPT Male 1/4 NPT Female x 1/4 NPT Male 1/4 US Plug x 1/4 NPT Male 3/8 US Plug x 3/8 NPT Male 360 rotation for ease of moving tools 45 angle reduces hose bending For most portable non-impacting Size fitting to hose size and air flow TS-20US-2NPT TS-30US-3NPT 5105 360 O SWIVEL AIR CONNECTOR 7021AG 7041AG Swivel Joint Kits Swivel Air Fitting Part # Inlet Weight 7025S 1/4 NPT 2.5 oz 7021 1/4 NPT 2.5 oz 7021AG 1/4 NPT 3.2 oz 7041A 3/8 NPT 2.5 oz 7041AG 3/8 NPT 3.3 oz 7051 1/2 NPT 6.6 oz 360 rotation for difficult angles For most portable air tools including screwdrivers, drills, grinders, impacts, sanders, and more Size fitting to hose size and air flow 66 www.eagle-group.com

ACCESSORIES: BITS & SOCKETS BIT HOLDERS L SLOTTED INSERT BITS L H 1/4 L L Part No mm in 1/4 Hex, Magnetic A3BHM-3 75 2.94 A3BHM-6 150 5.91 PHILLIPS POWER BITS Screw L L Blade Blade Part No Size mm in Thickness Width A38M8-1 8 25 0.98 0.04 0.25 A38M10-1 10 25 0.98 0.05 0.28 SQUARE RECESS POWER BITS L L Point L L Part No Size mm in A3S2-3 2 75 2.95 A3S2-6 2 150 5.91 A3S3-3 3 75 2.95 A3S3-6 3 150 5.91 PHILLIPS INSERT BITS Point Nominal L L Part No Size Square Size mm in A3R1/8-2.75 2 1/8 70 2.76 A3R9/64-2.75 3 9/64 70 2.76 SQUARE RECESS INSERT BITS L L Point L L Part No Size mm in A38S2-1 2 25 0.98 A38S3-1 3 25 0.98 SLOTTED POWER BITS Point Nominal L L Part No Size Square Size mm in A38R1/8-1 2 1/8 25 0.98 A38R9/64-1 3 9/64 25 0.98 MAG-O-NETS OD ID L L Screw L L Blade Blade Part No Size mm in Thickness Width A3M8-3 8 75 2.95 0.04 0.28 A3M10-3 10 75 2.95 0.05 0.31 Additional sizes of bits and sockets are available upon request. Call Eagle Group at 1-800-852-1368. l Turn virtually any standard screwdriver bit into a magnetized bit by simply sliding on a Mag-O-Net collar. l An easy, cost-effective alternative to traditional magnetic bit holder and insert bit combination. l Reusable and interchangeable - once a bit is worn out, simply remove and slide onto the next bit. Inner Outer Length Part No (ID) (OD) mm AM1/4Z 7 mm 19 mm 10 mm AM5Z 6 mm 17.5 mm 10 mm AM3/16Z 3/16 17.5 mm 10 mm www.eagle-group.com 67

ACCESSORIES: BITS & SOCKETS STANDARD FASTENER TOOLS Connect your tool to the application with Bits, Sockets, and Nutsetters from Eagle. Eagle has assembled the most complete package of commonly used screwdriver bits and nutsetters in the industry. Our goal is to supply you with the highest quality bits and nutsetters for all your fastener needs. If you re in electronics, aerospace, automotive, or general industry, Eagle has the bits and nutsetters to fit your needs. IMPACT SOCKETS SAE METRIC SAE METRIC SAE METRIC SAE METRIC H (6PT) Sq. ØD1 L TYPE A D1 D1 D2 D2 L L PART NO HEX MM IN MM IN MM IN 3/8 Square Drive A31/4 1/4 10 0.39 19 0.75 34 1.34 A35/16 5/16 12 0.47 19 0.75 34 1.34 A33/8 3/8 15 0.59 19 0.75 34 1.34 A306 6 mm 10 0.39 19 0.75 34 1.34 A307 7 mm 13 0.49 20 0.79 32 1.26 A308 8 mm 14 0.55 20 0.79 32 1.26 3/8 Square Drive, Deep A307-2 7 mm 13 0.49 20 0.79 50 1.97 A307-2.75 7 mm 13 0.49 20 0.79 70 2.76 A308-2 8 mm 14 0.55 20 0.79 50 1.97 3/8 Square Drive, Magnetic A31/4MP 1/4 10 0.39 19 0.75 34 1.34 A35/16MP 5/16 12 0.47 19 0.75 34 1.34 A33/8MP 3/8 15 0.59 19 0.75 34 1.34 A308MP 8 mm 14 0.55 20 0.79 32 1.26 A310MP 10 mm 17 0.65 20 0.79 32 1.26 A311MP 11 mm 17 0.65 19 0.75 34 1.34 1/2 Square Drive A43/8 3/8 16 0.63 25 0.98 38 1.50 A47/16 7/16 18 0.69 25 0.98 38 1.50 A41/2 1/2 19 0.75 25 0.98 50 1.97 A408 8 mm 16 0.61 25 0.98 40 1.58 A409 9 mm 16 0.63 25 0.98 40 1.58 A410 10 mm 18 0.69 25 0.98 40 1.58 1/2 Square Drive, Deep A43/8-3.25 3/8 17 0.67 25 0.98 82 3.23 A47/16-3.25 7/16 19 0.73 25 0.98 82 3.23 A41/2-3.25 1/2 22 0.85 25 0.98 82 3.23 A410-2 10 mm 18 0.69 25 0.98 50 1.97 A410-3 10 mm 18 0.69 25 0.98 75 2.95 A410-3.25 10 mm 17 0.67 25 0.98 82 3.23 A411-3.25 11 mm 19 0.73 25 0.98 82 3.23 ØD2 SAE METRIC SAE METRIC SAE METRIC D1 D1 D2 D2 L L PART NO HEX MM IN MM IN MM IN 1/2 Square Drive, Magnetic A408MP 8 mm 16 0.61 25 0.98 40 1.58 A410MP 10 mm 18 0.69 25 0.98 40 1.58 A412MP 12 mm 21 0.81 25 0.98 40 1.58 3/4 Square Drive A611/16 11/16 30 1.18 44 1.73 50 1.97 A63/4 3/4 32 1.26 44 1.73 50 1.97 A613/16 13/16 35 1.38 44 1.73 50 1.97 A614 14 mm 24 0.95 38 1.50 55 2.17 A616 16 mm 27 1.06 44 1.73 50 1.97 A617 17 mm 30 1.18 38 1.50 55 2.17 3/4 Square Drive, Deep A611/16-4 11/16 31 1.22 44 1.73 100 3.94 A63/4-4 3/4 33 1.30 44 1.73 100 3.94 A613/16-4 13/16 36 1.42 44 1.73 100 3.94 A617-4 17 mm 31 1.22 44 1.73 100 3.94 A618-4 18 mm 32 1.26 44 1.73 100 3.94 A619-4 19 mm 33 1.30 38 1.50 100 3.94 1 Square Drive A87/8 7/8 37 1.46 54 2.13 59 2.32 A815/16 15/16 38 1.50 54 2.13 59 2.32 A81 1 41 1.61 54 2.13 59 2.32 A817 17 mm 31 1.22 50 1.97 63 2.48 A819 19 mm 33 1.30 50 1.97 63 2.48 A821 21 mm 37 1.46 50 1.97 63 2.48 QUICK CHANGE CHUCKS H SQ D1 D1 L L PART NO DRIVE HEX MM IN MM IN ADC-2S 1/4 1/4 19 0.75 38 1.50 ADC-3S 3/8 1/4 20 0.79 42 1.65 ADC-4S 1/2 1/4 19 0.75 46 1.81 ADC-3SH7/16 3/8 7/16 25 0.98 46 1.81 ADC-4SH7/16 1/2 7/16 33 1.30 55 2.17 ALLEN SOCKETS L1 L1 L L PART NO HEX MM IN MM IN 3/8 Square Drive A31/4C 1/4 10 0.39 42 1.65 A304C 4 mm 10 0.39 42 1.65 1/2 Square Drive A41/4C 1/4 25 0.98 50 1.97 A405C 5 mm 25 0.98 50 1.97 Sq. L1 L 68 Additional types and sizes of fastener tools are available upon request. Contact Eagle at 1-800-852-1368. www.eagle-group.com

ACCESSORIES: BITS & SOCKETS EXTENSIONS SOCKET ADAPTERS L H Sq. M L D H SQ L L D D PART NO DRIVE HEX MM IN MM IN A375E 3/8 3/8 75 2.95 20 0.79 A405E 1/2 1/2 51 2.01 30 1.18 A610E 3/4 3/4 100 3.94 44 1.73 A810E 1 1 102 4.02 54 2.13 A1220E 1-1/4 1-1/4 200 7.87 60 2.36 A1418E 1-1/2 1-1/2 178 7.01 84 3.31 A2426E 2-1/2 2-1/2 264 10.39 137 5.39 BIT HOLDERS Sq. FEMALE MALE D D L L PART NO SQ. DRIVE SQ. DRIVE MM IN MM IN A302A 3/8 1/4 22 0.87 35 1.38 A403A 1/2 3/8 25 0.98 37 1.46 A504A 5/8 1/2 35 1.38 47 1.46 A604A 3/4 1/2 38 1.50 53 2.09 A806A 1 3/4 50 1.97 70 2.76 A128A 1-1/4 1 60 2.36 76 2.99 A#508A Spline #5 1 60 2.36 90 3.54 UNIVERSAL SOCKETS H Sq. L H L D2 1/4 D1 L L PART NO MM IN 1/4 Hex, Magnetic A3BHM-3 75 2.94 A3BHM-4 100 3.94 A3BHM-6 150 5.91 A3BHM-8 200 7.87 A3BHM-10 250 9.84 D1 D1 D2 D2 L L PART NO HEX MM IN MM IN MM IN 3/8 Square Drive A310U 10 mm 16 0.63 20 0.79 55 2.17 A311U 11 mm 16 0.63 20 0.79 60 2.36 1/2 Square Drive A412U 12 mm 20.5 0.81 25 0.98 70 2.76 A413U 13 mm 19 0.75 24 0.95 70 2.76 Description of Bits and Nutsetters Part Number Nomenclature Precedes Part Number BITS A3S = Phillips Power Drive A3W = Double Ended Phillips A38S = Phillips Insert A39S = Phillips Insert Reduced Nose A3M = Slotted Power Drive A38M = Slotted Insert A3MT = Slotted Power Drive Reduced Nose A3C = Allen Socket Head Power Drive A38C = Allen Socket Head Insert A3R = Square Recess Power Drive A3RT = Square Recess Turned Down (Power) A38R = Square Recess Insert A3T = Torx Power Drive A38T = Torx Insert A3TS = Torq-Set Power Drive A38TS = Torq-Set Insert A3TA = Triangle Power Drive A3TW = Tri-Wing Power Drive A38TW = Tri-Wing Insert A7 = 7/16 Power Drive AS = Electric Type Phillips BITS (Cont.) AM = Electric Type Slotted ATW = ElectricType Tri-Wing AT = Electric Hios Type Torx A26S = Electric Driver Phillips A26M = Electric Driver Slotted A26C = Electric Driver Allen Socket Head A3BHM = Insert Bit Holder (Magnetic Type) A3BHD = Insert Bit Holder (Non Magnetic) NUTSETTERS A3B A3BMP A3BMS A3BMT A3BU MAG-O-NETS = Nutsetter = Magnetic (MP) Pressed Type = Magnetic (MS) Spring Loaded = Magnetic (MT) Tube Type = Universal Nutsetter AM = AIMCO Mag-O-Net Contained Within Part Number BITS PZ = Pozidriv PZACR = Pozidriv ACR SDV = Supadriv TR = Torx Tamper Resistant ACRI = ACR Installation ACR = ACR Remove ACRB = ACR 4x4 Both Install and Remove E4 = Electric 4mm diameter E5 = Electric 5mm diameter RS = Reduced Shank Additional types and sizes of fastener tools are available upon request. Contact Eagle at 1-800-852-1368. www.eagle-group.com 69

ACCESSORIES: BITS & SOCKETS PHILLIPS POWER BITS NUTSETTERS L L H Double-Ended POINT L L PART NO SIZE MM IN A3S0-2 0 50 1.97 A3S1-2 1 50 1.97 A3S1-2.75 1 70 2.76 A3S1-3 1 75 2.95 A3S1-3.5 1 90 3.54 A3S1-4 1 100 3.94 A3S1-6 1 150 5.91 A3S2-1.2 2 30 1.18 A3S2-1.6 2 40 1.57 A3S3-2 3 50 1.97 A3S3-2.75 3 70 2.76 L A3W1-3 1 75 2.94 A3W1-4 1 100 3.94 A3W2-2 2 50 1.97 A3W2-3 2 75 2.94 A3W2-4 2 100 3.94 A3W2-6 2 150 5.91 A3W2-8 2 200 7.87 A3W2-10 2 250 9.84 A3W2-12 2 300 11.81 A3W3-2 3 50 1.97 A3W3-3 3 75 2.94 A3W3-4 3 100 3.94 A3W3-6 3 150 5.91 A3W3-8 3 200 7.87 12 L L PART NO HEX MM IN A3B1/4-2 1/4 50 1.97 A3B1/4-2.5 1/4 63 2.50 A3B5/16-2 5/16 50 1.97 A3B5/16-2.5 5/16 63 2.50 A3B3/8-2 3/8 50 1.97 A3B3/8-2.5 3/8 63 2.50 A3B05-2.75 5 mm 70 2.76 A3B55-1.2 5.5 mm 30 1.18 A3B55-2.75 5.5 mm 70 2.76 A3B55-4 5.5 mm 100 3.94 A3B06-2.75 6 mm 70 2.76 A3B07-1.2 7 mm 30 1.18 A3B07-2 7 mm 50 1.97 A3B07-2.75 7 mm 70 2.76 A3B07-4 7 mm 100 3.94 A3B08-1.2 8 mm 30 1.18 A3B08-2 8 mm 50 1.97 A3B08-2.75 8 mm 70 2.76 A3B08-4 8 mm 100 3.94 A3B08-6 8 mm 150 5.91 A3B08-8 8 mm 200 7.87 A3B09-2.75 9 mm 70 2.76 A3B09-4 9 mm 100 3.94 A3B10-1.2 10 mm 30 1.18 A3B10-2 10 mm 50 1.97 A3B10-2.75 10 mm 70 2.76 A3B11-2.75 11 mm 70 2.76 A3B12-1.2 12 mm 30 1.18 A3B13-2.75 13 mm 70 2.76 A3B14-2.75 14 mm 70 2.76 A3B16-2.75 16 mm 70 2.76 A3B17-2.75 17 mm 70 2.76 TORX POWER BITS TORX L L PART NO SIZE MM IN A3T6-2 T6 50 1.97 A3T7-2 T7 50 1.97 A3T7-2.75 T7 70 2.76 A3T7-3.5 T7 90 3.54 A3T7-6 T7 150 5.91 A3T8-2 T8 50 1.97 A3T9-2.75 T9 70 2.76 Additional types and sizes of fastener tools are available upon request. For custom parts, please contact us for more information. 1-800-852-1368 70 www.eagle-group.com

REFERENCE MATERIALS Conversion Charts..................................... 72 Warranty Information................................. 73 P O W E R T O O L S O L U T I O N S

CONVERSION CHARTS Fraction n Decimal n Metric Conversions (to.32) Decimal mm Decimal mm Decimal mm Decimal mm 1/32.03125.7938 9/32.28125 7.1438 17/32.53125 13.4938 25/32.78125 19.8438 1/16.0625 1.5875 5/16.3125 7.9375 9/16.5625 14.2875 13/16.8125 20.6375 3/32.09375 2.3812 11/32.34375 8.7312 19/32.59375 15.0812 27/32.84375 21.4312 1/8.125 3.175 3/8.375 9.525 5/8.625 15.875 7/8.875 22.225 5/32.15625 3.9688 13/32.40625 10.3188 21/32.65625 16.6688 29/32.90625 23.0188 3/16.1875 4.7625 7/16.4375 11.1125 11/16.6875 17.4625 15/16.9375 23.8125 7/32.21875 5.5562 15/32.46875 11.9062 23/32.71875 18.2562 31/32.96875 24.6062 1/4.25 6.35 1/2.5 12.7 3/4.75 19.05 1 1.0 25.4 Thread Size to Hex Size MM MM UNC INCHES SAE INCHES M 2 4 M 27 41 1/4 7/16 1/4 7/16 M 2.3 4.5 M 30 46 5/16 1/2 5/16 1/2 M 2.6 5 M 33 50 3/8 9/16 3/8 9/16 M 3 5.5 M 36 55 7/16 11/16 7/16 5/8 M 3.5 6 M 39 60 1/2 3/4 1/2 3/4 M 4 7 M 42 65 9/16 7/8 9/16 7/8 M 5 8 M 45 70 5/8 15/16 5/8 15/16 (M 5-6) 9 M 48 75 3/4 1-1/8 3/4 1-1/16 M 6 10 M 52 80 7/8 1-5/16 7/8 1-1/4 M 7 11 M 56 85 1 1-1/2 1-1/8 1-7/16 M 8 13 M 60 90 1-1/8 1-11/16 1-1/4 1-13/16 (M 8) 14 M 64 95 1-1/4 1-7/8 1-3/8 2 M 10 16 M 68 100 1-3/8 2-1/16 1-1/2 2-3/16 (M 10) 17 M 72 105 1-1/2 2-1/4 M 12 18 M 76 110 1-3/4 2-5/8 (M 12) 19 M 80 115 2 3 M 14 21 M 85 120 2-1/4 3-3/8 (M 14) 22 M 90 130 2-1/2 3-3/4 M 16 24 M 95 135 M 18 27 M 100 145 M 20 30 M 105 150 (M 22) 32 M 110 155 M 22 34 M 115 165 M 24 36 M 120 170 Torque Conversion Factors Units to be SAE METRIC INTERNATIONAL SYSTEM - S.I. Converted ozf-in lbf-in lbf-ft gf-cm kgf-cm kgf-m mnm cnm Nm 1 ozf-in = 1 0.0625 0.005 72 0.072 0.0007 7.062 0.706 0.007 1 lbf-in = 16 1 0.083 1152.1 1.152 0.0115 113 11.3 0.113 1 lbf-ft = 192 12 1 13826 13.83 0.138 1356 135.6 1.356 1 gf-cm = 0.014 0.0009 0.00007 1 0.001 0.00001 0.098 0.01 0.0001 1 kgf-cm = 13.89 0.868 0.072 1000 1 0.01 98.07 9.807 0.098 1 kgf-m = 1389 86.8 7.233 100000 100 1 9807 980.7 9.807 1 mn-m = 0.142 0.009 0.0007 10.2 0.01 0.0001 1 0.1 0.001 1 cn-m = 1.42 0.088 0.007 102 0.102 0.001 10 1 0.01 1 N-m = 141.6 8.851 0.738 10197 10.20 0.102 1000 100 1 72 www.eagle-group.com

WARRANTY INFORMATION NEW TOOL AND ACCESSORY WARRANTY Any new tool or accessory branded with the Eagle name, and purchased from EAGLE GROUP (EAGLE), or through one of its authorized distributors or agents, is warranted to the original buyer against defects in materials and workmanship for a period of one (1) year* from date of delivery. Under the terms of this warranty, EAGLE GROUP will repair or replace any product or accessory warranted hereunder and returned freight prepaid proving to EAGLE GROUP's satisfaction to be defective as a result of workmanship or materials. In order to qualify for this warranty, written notice to EAGLE GROUP must be given immediately upon discovery of such defect, at which time EAGLE GROUP will issue an authorization to return the tool. The defective item must be promptly returned to an authorized EAGLE GROUP service center with all freight charges prepaid. REPAIRED TOOL WARRANTY Once a tool is beyond the new product warranty period, as detailed above, EAGLE GROUP will provide repair warranty on pneumatic tools for a period of 90 days* beyond the warrantied repair date. EXCLUSION FROM WARRANTY This warranty is valid only on products purchased from EAGLE GROUP, or thru its authorized distributors or agents. EAGLE GROUP shall have no obligation pursuant to the EAGLE GROUP Warranty with respect to any tools or accessories which in EAGLE GROUP's sole judgment have been altered, damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer, or any other person other than an authorized representative of EAGLE GROUP, has made any attempt to service or modify the tool or accessory prior to its return to EAGLE GROUP under this Warranty. The warranty provision with respect to each such product may be amended by EAGLE GROUP from time to time in its sole discretion. The liability of EAGLE GROUP hereunder shall be limited to replacing or repairing, at its option, any products which are returned freight prepaid to EAGLE GROUP and which EAGLE GROUP determines to be defective as described above or, at EAGLE GROUP's option, refunding the purchase price of such products. EAGLE GROUP reserves the right to make periodic changes in construction or tool design at any time. EAGLE GROUP specifically reserves the right to make these changes without incurring any obligation or incorporating such changes or updates in tools or parts previously distributed. THE EAGLE GROUP WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND EAGLE GROUP EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SETS FORTH THE SOLE AND EXCLUSIVE REMEDY IN CONTRACT, TORT, STRICT LIABILITY, OR OTHERWISE. THIS WARRANTY IS THE ONLY WARRANTY MADE BY EAGLE GROUP WITH RESPECT TO THE GOODS DELIVERED HEREUNDER, AND MAY BE MODIFIED OR AMENDED ONLY BY A WRITTEN INSTRUMENT SIGNED BY A DULY AUTHORIZED OFFICER OF EAGLE GROUP. LIMITATION OF LIABILITY EAGLE GROUP'S LIABILITY PURSUANT TO WARRANTY OF THE PRODUCTS COVERED HEREUNDER IS LIMITED TO REFUND OF THE PURCHASE PRICE. IN NO EVENT SHALL EAGLE GROUP BE LIABLE FOR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS BY THE BUYER. IN NO EVENT SHALL EAGLE GROUP BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL OR OTHER DAMAGES (INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT) WHETHER OR NOT EAGLE GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, HOWEVER CAUSED, WHETHER FOR BREACH OR REPUDIATION OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE OR OTHERWISE. THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST BUYER. THE ESSENTIAL PURPOSE OF THIS PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EAGLE GROUP ARISING OUT OF THIS AGREEMENT AND/OR SALE. Note: The EAGLE GROUP Warranty confers specific legal rights, however some states or jurisdictions may not allow certain exclusions or limitations within this warranty. * All warranty periods addressed herein are determined using a standard shift, eight-hour work day. EAGLE GROUP Attn: Service Department 10000 SE Pine Street Portland, OR 97216 877.273.3903 www.eagle-group.com 73

INDEX MODEL # PAGE MODEL # PAGE MODEL # PAGE MODEL # PAGE MODEL # PAGE AFRL-2........... 64 AFRL-2-C..........64 AFRL-3........... 64 AFRL-3-C..........64 AFRL-4........... 64 AFRL-4HTA........ 64 AFRL-8........... 64 ASB-0C...........63 ASB-3C...........63 ASB-5C...........63 ASH-250C-10MSZ.... 65 ASH-250C-15MSZ.... 65 ASH-250C-25MSZ.... 65 ASH-250Z......... 65 ASH-375C-15MSZ.... 65 ASH-375C-25MSZ.... 65 ASH-375Z......... 65 ASH-500C-15MSZ.... 65 ASH-500C-25MSZ.... 65 ASH-500Z......... 65 ATCE-25.......... 43 ATCE-100......... 43 B23............. 65 B23E............ 65 B25............. 65 BUR5X30X78....... 58 CWR -100......... 62 CWR -200......... 62 CWR-250F......... 62 DW-75........... 62 DW-175F..........62 DW-300.......... 62 EPTS-33011-25Q.....39 EPTS-33011P-25Q.... 41 EPTS-33017-25Q.....39 EPTS-33017P-25Q.... 41 EPTS-33023-25Q.....40 EPTS-33023P-25Q.... 41 EPTS-34008-25Q.....40 EPTS-34008P-25Q.... 41 EPTS-34015-25Q.....40 EPTS-34015P-25Q.... 42 EPTS-34021-25Q.....40 EPTS-34021P-25Q.... 42 EPTS-35005P-25Q.... 42 EPTS-35008P-25Q.... 42 EPTS-35017P-25Q.... 43 EPTS-N34003-25.....43 EPTS-N34003-38.....43 GAB41-A60-DW..... 15 GDB31-E18-CE...... 12 GDB31-E18-CW..... 12 GTB31-A12-DW..... 15 GTB41-A60-DW..... 15 GTB41-A60-DW-6.... 15 GTB41-A85-DW..... 15 GVB51P-V60-DW.....17 GVB51P-V60-DW-6... 17 GVB51P-V85-DW.....16 RMA-7L...........64 RMA-15L..........64 RMA-20L..........64 RPA-1............64 RPA-2............64 RPA-3............64 TS-20NP-2NPT...... 66 TS-20US-2NPT...... 66 TS-30NP-2NPT...... 66 TS-30US-2NPT...... 66 TW-00........... 63 TW-3............ 63 TW-5............ 63 TW-9............ 63 TW-15........... 63 TW-22........... 63 TW-30........... 63 TW-40........... 63 TW-50........... 63 TW-60........... 63 TW-70........... 63 74 1101............ 37 1102............ 38 1105............ 37 1115............ 38 1121............ 38 1550............ 38 1555............ 39 1577............ 39 250-RZ........... 65 250-SZ........... 65 2004............ 29 2010............ 27 2150............ 27 2225............ 27 2225L............27 2240............ 28 2240PEC.......... 28 2256............ 28 2260............ 27 2260L............27 2263PEC.......... 28 2377............ 28 2403L............30 2450............ 30 2450L............30 2463............ 30 2485L............29 2550............ 30 375-RZ........... 65 375-SZ........... 65 3100............ 32 3105............ 32 3115............ 32 3120............ 33 3205............ 32 3220............ 33 3320............ 33 4001............ 54 4004............ 56 4005............ 56 4005SC...........56 4009............ 55 4010............ 55 4100............ 54 4178............ 54 4260............ 54 4615............ 55 4620............ 55 5A-1676-7.........14 5A-04122......... 10 5A-04202......... 10 5I-03302...........7 5I-03302F..........7 5I-04252...........6 5I-04252X..........9 5I-06202X..........9 5I-06222...........6 5I-06251...........6 5I-10202...........6 5I-10202X..........9 500-SZ........... 65 5000............ 11 5001.............8 5002C............8 5003C........... 11 5006............ 14 5007............ 14 5008............ 14 5040............ 16 5040-6........... 16 5040-9........... 16 5070............ 60 5072............ 60 5075............ 60 5077............ 60 5102K............11 5104............ 12 5105............ 13 5110.............8 5114............ 60 5116............ 10 5194EC...........13 5195EC...........13 5196EC...........13 5200EC........... 7 5201EC........... 7 5202EC...........10 5203EC...........11 5205-2EC......... 12 5206EC........... 8 5207EC........... 9 5G-10125......... 58 6005............ 21 6009............ 22 6012............ 20 6017............ 23 6050............ 58 6080............ 58 6113............ 22 6114............ 22 6115............ 22 6115EC...........20 6116............ 23 6133EC...........20 6134EC...........20 6191............ 59 6301............ 59 6507............ 21 6812EC...........58 6905EC...........21 6906EC...........21 712P-420......... 48 712P-5100.........48 714P-2100R........48 738P-3200.........48 7005............ 46 7021............ 66 7021AG.......... 66 7025S............66 7041A........... 66 7041AG.......... 66 7051............ 66 7100............ 46 7102............ 47 7105............ 47 7106............ 47 7107............ 47 7110............ 46 7650............ 46 7P-0620-1......... 37 7P-0620-2......... 49 7P-0620-4......... 49 7P-0620-5......... 49 7P-0620-6......... 49 7P-0620-7......... 50 7P-1028-1......... 37 7P-1028-4......... 50 7P-1028-5......... 50 7P-1028-6......... 50 7P-1028-7......... 51 8101............ 13 8102............ 13 8103............ 13 8116............ 59 8125............ 59 932-100-0......... 64 932-110-0A........ 64 9024............ 56 9043............ 56 Bits and Sockets A#508A.......... 69 A3BHM-3......... 67 A3BHM-6......... 67 A3M8-3.......... 67 A3M10-3..........67 A3R1/8-2.75........67 A3R9/64-2.75.......67 A3S2-3........... 67 A3S2-6........... 67 A3S3-3........... 67 www.eagle-group.com A3S3-6........... 67 A38M8-1..........67 A38M10-1......... 67 A38R1/8-1.........67 A38R9/64-1........ 67 A38S2-1.......... 67 A38S3-1.......... 67 A302A........... 69 A3B1/4-2..........70 A3B1/4-2.5........ 70 A3B3/8-2..........70 A3B3/8-2.5........ 70 A3B05-2.75........ 70 A3B5/16-2.........70 A3B5/16-2.5........70 A3B06-2.75........ 70 A3B07-1.2......... 70 A3B07-2.......... 70 A3B07-2.75........ 70 A3B07-4.......... 70 A3B08-1.2......... 70 A3B08-2.......... 70 A3B08-2.75........ 70 A3B08-4.......... 70 A3B08-6.......... 70 A3B08-8.......... 70 A3B09-2.75........ 70 A3B09-4.......... 70 A3B10-1.2......... 70 A3B10-2.......... 70 A3B10-2.75........ 70 A3B11-2.75........ 70 A3B12-1.2......... 70 A3B13-2.75........ 70 A3B14-2.75........ 70 A3B16-2.75........ 70 A3B17-2.75........ 70 A3B55-1.2......... 70 A3B55-2.75........ 70 A3B55-4.......... 70 A3BHM-3......... 69 A3BHM-4......... 69 A3BHM-6......... 69 A3BHM-8......... 69 A3BHM-10.........69 A3S0-2........... 70 A3S1-2........... 70 A3S1-2.75......... 70 A3S1-3........... 70 A3S1-3.5..........70 A3S1-4........... 70 A3S1-6........... 70 A3S2-1.2..........70 A3S2-1.6..........70 A3S3-2........... 70 A3S3-2.75......... 70 A3T6-2........... 70 A3T7-2........... 70 A3T7-2.75......... 70 A3T7-3.5..........70 A3T7-6........... 70 A3T8-2........... 70 A3T9-2.75......... 70 A3W1-3.......... 70 A3W1-4.......... 70 A3W2-2.......... 70 A3W2-3.......... 70 A3W2-4.......... 70 A3W2-6.......... 70 A3W2-8.......... 70 A3W2-10..........70 A3W2-12..........70 A3W3-2.......... 70 A3W3-3.......... 70 A3W3-4.......... 70 A3W3-6.......... 70 A3W3-8.......... 70 A403A........... 69 A504A........... 69 A604A........... 69 A806A........... 69 A128A........... 69 A31/4............68 A31/4C...........68 A31/4MP..........68 A33/8............68 A33/8MP..........68 A35/16........... 68 A35/16MP.........68 A41/2............68 A41/2-3.25........ 68 A41/4C...........68 A43/8............68 A43/8-3.25........ 68 A47/16........... 68 A47/16-3.25........68 A63/4............68 A63/4-4.......... 68 A81............. 68 A87/8............68 A304C........... 68 A306............ 68 A307............ 68 A307-2........... 68 A307-2.7..........68 A308............ 68 A308-2........... 68 A308MP.......... 68 A310MP.......... 68 A310U........... 69 A311MP.......... 68 A311U........... 69 A375E........... 69 A405C........... 68 A405E........... 69 A408............ 68 A408MP.......... 68 A409............ 68 A410............ 68 A410-2........... 68 A410-3........... 68 A410-3.25......... 68 A410MP.......... 68 A411-3.25......... 68 A412MP.......... 68 A412U........... 69 A413U........... 69 A610E........... 69 A611/16.......... 68 A611/16-4.........68 A613/16.......... 68 A613/16-4.........68 A614............ 68 A616............ 68 A617............ 68 A617-4........... 68 A618-4........... 68 A619-4........... 68 A810E........... 69 A815/16.......... 68 A817............ 68 A819............ 68 A821............ 68 A1220E...........69 A1418E...........69 A2426E...........69 ADC-2S...........68 ADC-3S...........68 ADC-3SH7/16.......68 ADC-4S...........68 ADC-4SH7/16.......68 AM1/4Z.......... 67 AM3/16Z..........67 AM5Z............67

www.eagle-group.com AIMCO CORPORATE HEADQUARTERS 10000 SE Pine Street Portland, Oregon 97216 Phone: (503) 254 6600 Toll Free: 1-800-852-1368 AIMCO CORPORATION DE MEXICO SA DE CV Ave. Cristobal Colon 14529 Chihuahua, Chihuahua. 31125 Mexico Phone: (01-614) 380-1010 Fax: (01-614) 380-1019 LIT-E100, REV 08-07-18, 2018 AIMCO PRINTED IN THE U.S.A.