Price quote for: Custom Steel and / or Aluminum Fabricated Truck Bodies Contract end Date 30 Sept 2018 Vendor Name: Contact Person: Street Address: Truck Utilities Inc Paul Warner 2370 English Street P.O. Box: City, State, Zip Phone #: St Paul, MN 55109 651-393-2274 Toll Free #: 800-869-1075 Fax #: Email Address: Web Address 651-484-0076 paulw@truckutilities.com www.truckutilities.com Custom Steel and/or Aluminum Fabricated Truck Bodies Body Version 1 Steel Aluminum Body manufacturer Alum-Line Body Version 2 Aluminum Body manufacturer Alum-line Body Version 3 Steel Aluminum Body Manufacturer Alum-Line Body Version 4 Not used this contract Body Version 5 Not used this contract Body Version 6 Not used this contract Body Version 7 Steel Steel Aluminum Body manufacturer Alum-Line Body Version 8 Steel
Aluminum Body Manufactruer Alum-Line Body Version 9 Steel Body Version 10 Not used this contract 1.0 Body version 1 1.0 Body version 1 per Specification 1.0 made in steel 41,665.00-1.1 Body Version 1 per Specification 1.0 made in aluminum 44,475.00-2.0 Body version 2 2.1 Body Version 2 as per Specification 2.0 44,125.00-3.0 Body Version 3 3.1 Body Version 3.0 per Specification 3.0 62,935.00-3.2 Body Version 3.0 made in aluminum, unpainted treadbrite 65,935.00-4.0 Body Version 4 Not used this contract 5.0 Body Version 5 Not used this contract 6.0 Body Version 6 Not used this contract 7.0 Body Version 7 7.1 Body version 7 Made of steel per Specification 7.0 42,800.00-7.2 Body version 7 Made of Aluminum per Specification 7.0 43,365.00-8.0 Body Version 8 8.1 Body version 8 Made of steel per Specification 8.0 43,890.00-8.2 Body version 8 Made of Aluminum per Specification 8.0 46,865.00-9.0 Body Version 9 9.1 Body version 9 per Specification 9.0 53,655.00-9.2 Body version 9 finish paint PPG Conscept white or black, add 3,975.00-9.3 Body version 9 finish paint PPG Conscept other than white or black, add Not Available #VALUE! 10.0 Body Version 10 Not used this contract 10.0 Front Deck 10.1 Per Specification 11.0 Max extension 12' from side of chassis 26,950.00-10.2 Radio remote for Front Deck 1,760.00-10.3 Walk deck custom front bumper 1,270.00-11.0 Options for Bodys 1 through 9 Use this section for adding optional body items,such as renmovable containment items, ladder boxes, Stake poctet doors, 11.1 Dimensions 1200 W pure sine wave inverter 2,125.00-11.2 Dimensions 1800 W pure sine wave inverter 2,575.00-11.3 Dimensions 2400 W pure sine wave inverter 3,220.00 -
11.4 Dimensions 3000 W pure sine wave inverter 4,315.00-11.5 Dimensions 3600 W pure sine wave inverter 4,775.00 11.6 Throttle kicker for inverter 615.00 11.7 Group 31 battery, each 375.00 11.8 Charge for adding cab mounted GFI duplex receptacle 220.00-11.9 charge for 50' 12-3 electric cord reel with plug end, installed. 855.00-11.10 charge for 50' 14-3 electric reel with light, installed 615.00-11.11 Charge for cab mounted 12 volt power port, installed 153.00-11.12 Charge for installing LED rope style lights in cabinets on both sides of doors, each compartment. TU installed 180.00-11.13 charge for installing Betts 32-5001 3 wire par 36 12v work light. 350.00-11.14 Charge for installing K&H industries model 475-20 remote control flood light 737.00-11.15 Charge for installing additional loop or pool style hand rail at rear of body. 135.00-11.16 Charge for switching deck material to 3/16" Smooth surface & coating it with thick layer of Vortex traction material including 6" up back side of cabinets 2,188.00-11.17 Charge for switch top of step bumper to 3/16" Smooth surface & coating it with thick layer of Vortex material. 585.00-11.18 Charge for installing twin 50' hose, Hydraulic hose reel with 4 way roller and selector valve. 2,275.00-11.19 Hydraulic/pnumatic operated tools, post pounder, Stanley post Pullers and chipping hammers. Hand Held Price List Dated 11/20/2017 #VALUE! 11.20 Front bumper, frame extension, with sign post holder, 3/16 " Aluminum tread plate work surface. Not Available #VALUE! 11.21 Charge for strobe lights in Specification 1.28 & 1.29 1,675.00-11.22 Charge for second expanded metal basket on curb side as in Specidication 1.12 875.00-11.23 Braden PD18C 20,000 lb hydraulic winch, front mount. Includes front bumper, mount, PTO, pump, tank, plumbing, 200' of 1/2" cable 23,000.00-11.24 Braden PD18C 20,000 lb hydraulic winch, front mount. Includes front bumper, 200' of 1/2" cable, control valve. Utililizes crane hydraulics. Note: Winch speed varies by crane model. Spec 3.32 18,000.00-1.25 3/8 x 50' air hose reel plumbed & installed on body 645.00-11.26 1/2 x 50' air hose reel plumbed & installed on body 930.00-11.27 3/4 x 50' air hose reel plumbed & installed on body 1,170.00-11.28 Water separator and oiler with a 1/2inch inlet 680.00-11.29 Water separator and oiler with a ¾ inch inlet 860.00-11.30 Whelen L31HAF warning lights installed per Spec 905.00-11.31 Whelen 2FA00ZAR installed per spec 700.00-11.32 Whelen 2EA00ZAR warning lights per Spec 700.00-11.33 Go Light model 2020 per spec 9.42 775.00-11.34 Moon roof vent per spec 9.36 630.00 -
11.35 Slide out for welder per spec 9.44 1,740.00-11.36 Windowless door option per spec 9.23 (31.00) - 11.37 Rollup rear door per Spec 9.23 2,559.00-11.38 Lift gate per spec 9.25 & 9.46 4,450.00-11.39 Price for additional support structure for optional crane per Spec 8.25 2,540.00-11.40 Price for additional support as per Spec 8.26 257.00-11.41 Body version 8 Made of Aluminum, rollup doors in lieu of swing doors except for RF#1 to have a regular door with 3- point D-ring latch 10,023.00-11.42 6" long sills in lieu of 8" - - 11.43 Body #1 smooth aluminum body painted 6,190.00-11.44 Body #2 smooth aluminum body painted 5,215.00-11.45 Body #3 smooth aluminum body painted 6,300.00-11.46 Body #7 smooth aluminum body painted 5,330.00-11.47 Body #8 smooth aluminum body painted 5,860.00-11.48 Shark Hide application to unpainted aluminum body. Must be applied at factory during manufacturing process. Price is per linear foot of body length 165.00-11.49 Diversified front bumper post puller PPF-203 or PPF- 295 (does not include PTO/pump and reservoir) 10,360.00-11.50 Shaver SPP-332 hyd post puller (w/o control valve) 4,100.00-11.51 Control valve mounted to Shaver SPP-332 425.00-11.52 Safe Guard, anti-slip overlay, per square foot 40.00-11.53 Whelen L32 LED 360-degree strobe 700.00-11.54 Whelen R2LPHPA 835.00-11.55 Whelen TAL85 Traffic advisor 1,755.00-11.56 TAL85 extension cable 160.00-11.57 Connect to chassis air storage w/ service end 265.00-11.58 Whelen M4 split colors, surface mount, pair. 4"x6" footprint 821.00-11.59 Wire in circuit for flush/surface mount strobe, pair. Front or rear or sides 325.00 11.60 Wire in circuit for bracket mounted strobe, each 325.00 - - 11.61 Chassis switch programming 515.00-11.62 Back-up alarm 180.00-11.63 Tiger Tough seat covers, each seat 265.00-11.64 Ram floor mounted laptop stand 1,550.00-11.65 Relocate chassis reverse sensors 210.00-11.66 Relocate chassis back-up camera 310.00-11.67 Anti-slip roll on paint on cargo floor 465.00-11.68 Mount customer supplied inverter and wire to chassis. 1,200.00-11.69 Buckstop factory built black front push bumper. (Fits Ford F-250 through F-550 and Dodge 2500 through 5500). Installed w/o winch 5,000.00 11.70 Back Rak, installed 500.00 - - 11.71 Warn 17801 M12000 electric winch, 12,000 lbs capacity. Installed 1,900.00-11.72 Warn 68801 16.5ti electric winch, 16,500 lbs capacity. Installed 2,100.00-11.73 Increase side pack depth to 22" on body version #9 1,100.00-11.74 Additional header for roll up doors on aluminum bodies. Price per linear foot 60.00-11.75 Truck Lite 27450C high/low beam light with three position switch 850.00 -
11.76 Custom light bar to be mounted at front of Knapheide HC bodies, 3" above cab. Bar size to accomadate a large light bar 2,000.00-1.77 Lift gate modifications to fit narrower service body openings 1,950.00-1.78 ADA storage box with four drawers. 22"W x 45"H x 102"D. Swing door at rear 5,625.00-1.79 Custom front push bumper, 16"H, 8 guage structural with storage box. Exterior lined with rubber. Bumper to be platform style with Safe Guard covering. Sight sticks on front corners. Includes ICC rear bumper. 10,500.00-1.80 HD aluminum pull out parts drawer assy. Stack of four drawers with adj dividers, each drawer 5"H x 10"W x 120"D on roller system. 200 lbs capacity each drawer 5,700.00-1.81 Rear mounted tow hooks 660.00-12.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip 12.1 St Paul, MN 55109 3.00-13.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES - (See Special Terms and Conditions) % Discount 0.00% -. 14.0 Equipment Inspection and Repair 14.1 Rate for Mechanical Work 110.00-14.2 Rate for Body Work 110.00 - Price List Date and Number No Price List Available
Stanley Hydraulic Tools Effective 20 November 2017 through 30 September 2018 Minnesota DOT Model Part No. Description Price CHIPPING HAMMERS CH15 CH1513101 CHIPPING HAMMER, CE, D-HANDLE,.580 HEX, SOLID RETAINER, 8 GPM W/COUPLERS 2,312.00 CH1533101 CHIPPING HAMMER, CE, D-HANDLE, UNDERWATER,.580 HEX, SOLID RETAINER, 8 GPM W/COUPLERS 2,623.00 CH18 CH18111 CHIPPING HAMMER, D-HANDLE,.580 HEX, 8 GPM 2,703.00 CH18311 CHIPPING HAMMER, D-HANDLE, UNDERWATER,.580 HEX, 8 GPM 3,073.00 NOTE: TWO EACH HOSE WHIPS WITH 3/8 IN. MALE PIPE HOSE ENDS INCLUDED. QUICK DISCONNECT COUPLERS AND TOOL STEEL NOT INCLUDED ON ALL MODELS. POST DRIVERS PD45 PD45131 POST DRIVER, OC, IN-LINE VALVE, ALL SIGN POSTS W/COUPLERS 2,928.00 PD45132 POST DRIVER, OC, VALVE IN-HANDLE W/COUPLERS 3,094.00 PD45132G POST DRIVER, EXTENDED ANVIL, HOSE WHIPS W/COUPLERS 3,277.00 PD48 PD48142 POST DRIVER, OC, IN-LINE VALVE, 4" DIA STEEL LOWER FOOT, 65 FT/LBS BLOW ENERGY AT 1000 BLOWS/MIN. 7-9 GPM, WITH FLAT FACE QUICK COUPLERES NOTE: HOSE WHIPS AND COUPLERS INCLUDED. 3,373.00 ACCESSORIES - POST DRIVERS PD45 15184 ADAPTOR, 1-3/4 IN. SQUARE POST 220.00 15185 ADAPTOR, 2 IN. ROUND POST 190.00 15186 ADAPTOR, 2-1/4 IN. SQUARE POST 218.00 15187 ADAPTOR, 2 IN. SQUARE POST 220.00 67784 ADAPTOR, 1-3/4 IN. ROUND POST 88.00 POST PULLERS PP10 PP10100 POST PULLER, OC 2,663.00 BREAKERS BR45 BR45120 BREAKER, OC, 54 FT/LBS BLOW ENERGY, W/ WHIP HOSES AND COUPLERS, 1 1/8" SHANK 2,465.00
BR67 BR87 BR67120 BR87120 BREAKER, OC, 87 FT/LBS BLOW ENERGY, W/ WHIP HOSES AND COUPLERS, 1 1/8" SHANK BREAKER, OC, 105 FT/LBS BLOW ENERGY, W/ WHIP HOSES AND COUPLERS, 1 1/8" SHANK 2,678.00 2,782.00 ACCESSORIES - BREAKERS BR45, BR67, BR87 02331 CLAY SPADE 5 1/2" BLADE 143.00 02332 ASPHALT CUTTER 5"X11" 106.00 02333 MOIL POINT, 14" U/C 34.00 02334 3" CHISEL, 14" U/C 46.00 03990 CHISEL POINT, 14" U/C 34.00 04176 GROUND ROD DRIVER 5/8" 138.00 08107 KEEN KUT CHISEL 77.00 08106 ASPHALT WEDGE 113.00 EARTH AUGER EA08 EA08102A EARTH AUGER, 1 3/8" HEX DRIVE WITH COUPLERS 1,777.00 ACCESSORIES - EARTH AUGER EA08 47406 AUGER, 2" DIA X 42" OAL 266.00 47407 AUGER, 3" DIA X 42" OAL 260.00 47408 AUGER, 4" DIA X 42" OAL 270.00 47409 AUGER, 6" DIA X 42" OAL 270.00 47410 AUGER, 8" DIA X 42" OAL 298.00 47411 AUGER, 10" DIA X 42" OAL 303.00 47412 AUGER, 12" DIA X 42" OAL 334.00 47413 AUGER, 16" DIA X 42" OAL 697.00 47414 AUGER, 18" DIA X 42" OAL 615.00 47415 EXTENSION TUBE 15" OAL 111.00 HYDRAULIC POWER UNITS GT18 GT18B02 HP28 HP28B02 POWER UNIT, 18 HP BRIGGS AND STRATON ENGINE. 5 OR 8 GPM FLOW SELECTOR, WITH COUPLERS POWER UNIT, 27 HP BRIGGS AND STRATON ENGINE, TWO (2) 8 GPM CIRCUITS, WITH COUPLERS 6,133.00 7,423.00 IMPACT WRENCHES IW24 IW24160 31043 IMPACT WRENCH, OC, 1 1/2" SQUARE DRIVE, WITH COUPLERS HYDRANT SAVER, NORTHERN KIT, 8' POWER TUBE, MUELLER 5 1/2" SOCKET AND PINS 7,963.00 1,187.00
ACCESSORIES - IMPACT WRENCHE IW24 30722 SOCKET, 4 1/4" MUELLER, SMITH, COLUMBIA 388.00 30723 SOCKET, 5 1/4" MUELLER, SMITH, COLUMBIA 388.00 30724 SOCKET, 5 1/4" WATEROUS 388.00 30725 SOCKET, 4 1/4" WATEROUS 388.00 30726 SOCKET, 5 1/4" KENNEDY 388.00 30727 SOCKET, 4 1/4" KENNEDY 493.00 30728 SOCKET, 5 1/4" CLOWE 388.00 30729 SOCKET, 4 1/4" CLOWE 532.00 SUBMERSIBLE PUMP SM20 SM2043101 SM2052101 SM2053101 SM50 SM50100 SUBMERSIBLE PUMP, 8 GPM FLOW RANGE, 250 GPM DISCHARGE FLOW, STEEL IMPELLER, WITH COUPLERS SUBMERSIBLE PUMP, 5 GPM FLOW RANGE, 250 GPM DISCHARGE FLOW, URETHANE IMPELLER, WITH COUPLERS SUBMERSIBLE PUMP, 8 GPM FLOW RANGE, 250 GPM DISCHARGE FLOW, URETHANE IMPELLER, WITH COUPLERS SBMERSIBLE PUMP, 8 GPM FLOW RANGE, 500 GPM DISCHARGE FLOW, STEEL IMPELLER, WITH COUPLERS 1,785.00 1,810.00 1,785.00 2,522.00 TRASH PUMPS TP03 TP08 TP0300301 TP08013 TRASH PUMP, 8 GPM FLOW RANGE, 450 GPM DISCHARGE FLOW, URETHANE IMPELLER, WITH COUPLERS AND 3" MALE CAM LOCK TRASH PUMP, 8 GPM FLOW RANGE, 800 GPM DISCHARGE FLOW, STEEL IMPELLER, WITH COUPLERS AND 4" MALE CAM LOCK 2,335.00 3,183.00 TAMPERS TA54 TA54103 TA54603 TA54603A TAMPER, 8 GPM FLOW RANGE, KIDNEY SHAPE SHOE WITH VALVE IN HANDLE, WITHOUT COUPLERS TAMPER, 8 GPM FLOW RANGE, KIDNEY SHAPE SHOE WITH NO CONTROL VALVE AND WITHOUT COUPLERS TAMPER, 8 GPM FLOW RANGE, KIDNEY SHAPE SHOE WITH 8' WHIP HOSES AND IN-LINE CONTROL VALVE, WITHOUT COUPLERS 2,117.00 1,933.00 2,335.00