Clamping Tools

Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves Extension pieces Tap wrench Tool holder Holder sets Arbors Die stock Guides for dies Lathe centre Exchangeable chuck collets Live lathe centres Lathe centre attachments Face driver Driving plate Sleeves Turning and lathe chucks Recessing attachments Hollow spindle stops Top jaws Tenons Spare jaws T-Slot Nuts and Accessories Clamp and Accessories Bench Vice and Jaws NC compact spanners Multiple clamping systems Permanent-Magnetic Camping Plates Round Chucks Demagnetising tools Vertical collet vices Three-jaw lathe chuck Dividing Units Rotary tables Precision micrometer tables.1. 3 3.1 3.4 4 4.1 4.4 5 5.1 5. 6 6.1 6.10 7 7.1 7.48 8 8.1 8.4 9 9.1 9.8

Our suppliers for catalogue-group : 0 / m $ O l e DIACATOR * Haimer W ; Mimatic e 0 & 8 d ä

1110-1111 Three-Jaw Drill Chucks 8 Prima With gear rim and key, jaws and key hole hardened. 1110 Heavy-duty industry type. With tapered mounting hole in compliance with DIN 38. For clockwise and counterclockwise operation. For stationary and manual electric hand drills. 1111 Industrial type Mainly for manually operated drilling machines. For clockwise and counterclockwise operation. Clamping tools 1110-1111 Capacity Internal taper Outside Ø wrench size 1110 1111 mm DIN 38 mm 0,5-4,0 B 10 4,0 S 1 101 0,5-6,5 B 1 9,5 S 1 103 0,5-6,5 B 10 9,5 S 1 103 0,5-8,0 B 10 9,5 S 1 104 0,5-8,0 B 1 9,5 S 1 105 0,8-10,0 B 1 34,5 S A 106 1,0-10,0 B 16 4,8 S A 109 1,5-13,0 B 1 4,8 S A 107 1,5-13,0 B 16 4,8 S A 111 1,0-16,0 B 18 56,5 S 3 113 3,0-16,0 B 16 50,0 S 3 11 5,0-0,0 B 65,0 S 4 114 111-1113 Three-Jaw Drill Chucks 8 With gear rim and key, jaws and key hole hardened. 111 107, 111 109 and 111 111 for clockwise and counterclockwise operation (through-hole). 111-1113 111 Prima Industrial type with threaded mounting hole. For clockwise operation of manually operated electric hand drills and electric impact drills. 1113 Prima-Mat Industrial type with Threaded mounting hole and Eccentric clamping force safety device. For electric impact drills with higher impact frequency. Capacity Mounting hole Outside Ø wrench size 111 1113 mm mm 0,5-8,0 3/8 inch x 4 9,5 S 1 104 0,8-10,0 3/8 inch x 4 34,5 S A 107 0,8-10,0 1/ inch x 0 34,5 S A 109 1,5-13,0 1/ inch x 0 4,8 S A 110 1,5-13,0 1/ inch x 0 4,8 S A 111 1,5-13,0 1/ inch x 0 4,5 S AT 101 3,0-16,0 5/8 inch x 16 50,0 S 3T 10 3,0-16,0 M 18 x,5 50,0 S 3T 103 1115 Spare Keys For drill chucks with gear rim. 1115 1115 04 Size D L 1115 mm mm S 1 4 30 01 S A 6 41 0 S AT 6 4 04 S 3 8 50 06 S 3T 8 51 07 S 4 9 75 08 www.hhw.de 1.3

Drill chuck 1118 Precision Drill Chucks with Gripping Force Retention Thanks to its special construction suitable for highest torque values (chucking forces). Strict quality control guarantees a true-running accuracy of 0,05 mm. Thanks to clamping force amplification the chucking force is doubled. Particularly suitable for machining centres, NC and CNC machines. For clockwise and counterclockwise operation. 1118 Clamping range Internal taper Outside Ø Torque 1118 mm DIN 38 mm kp/cm 0-13 B 16 51,5 400 101 110 Industrial type. Self-chucking, keyless. Clamping and unclamping by hand. Only for clockwise operation. Quick-Action Three-Jaw Drill Chucks 110 Capacity Internal taper Outside Ø Length 110... mm DIN 38 mm mm 1-10 B 1 36,1 76, 103 1-16 B 16 50,9 114,4 105 1-16 B 18 51,0 114,8 107 111-113 8 Supra Self-chucking, keyless. For clamping and unclamping by hand. Chuck tightens automatically during drilling. Only for clockwise operation. Quick-Action Three-Jaw Drill Chucks 11 Lightweight Industrial type, with tapered mounting hole in compliance with DIN 38. Mainly for manually operated drilling machines. 111 111 Heavy-duty industry type, with tapered mounting hole in compliance with DIN 38. For upright drilling machines. B18 V shortened by 7 mm. B16 V shortened by,5 mm. 113 Standard-duty type, with threaded mounting hole. For electric hand drills. Capacity Internal taper Threaded mounting hole Outside Ø Length 111 11 113 mm DIN 38 mm mm 0-6,5 B 10 3,0 65,6 10 0-6,5 B 1 3,0 65,6 103 0-8,0 B 1 35,8 73,4 104 0-10,0 B 1 40, 86,1 105 0-10,0 B 16 40, 89,1 106 0,5-10,0 1/" x 0 35,8 73,7 306 0,5-10,0 3/8" x 4 35,8 73,7 307 1,0-13,0 1/" x 0 46,0 101,5 308 1,0-13,0 B 16 46,0 101,5 107 1,0-13,0 B 16 V 40, 8,3 108 3,0-16,0 B 16 V 46,0 106,0 109 3,0-16,0 B 18 V 51,0 106,8 111 3,0-16,0 5/8" x 16 46,0 97,5 313 1.4 www.hhw.de

115 8 Supra ST Self-chucking, keyless. Chuck tightens automatically in proportion to cutting force. Gripping force retains even under heavy-duty conditions. With clamping force retention. For clockwise and counterclockwise operation. Quick-Action Three-Jaw Drill Chucks Clamping tools 115 B16 V shortened by,5 mm. Clamping width Internal taper Threaded mounting hole Outside Ø Length 115 mm DIN 38 mm mm 0,5-10 B 1 40,0 75,7 301 0,5-10 1/ inch x 0 40,0 73,7 30 1,0-13 1/ inch x 0 4,8 83,3 303 1,0-13 B 16 V 4,8 89,3 304 116 8 Spiro Precision type, self-chucking, keyless. Pointed sleeve shape, high true-running accuracy, hardened wear parts. Thanks to automatic re-chucking during drilling, particularly suitable for high rotational speed applications on electric hand drills, upright drilling machines and special drilling units. Quick-Action Three-Jaw Drill Chucks 116 303-304 Additionally with gripping force retention. For clockwise and counterclockwise operation. 116 101 B18 V shortened by 7 mm. Capacity Internal taper Outside Ø Length 116 mm DIN 38 mm mm 0-4,0 B 10 8 53,3 101 0-6,5 B 10 35 68,6 10 0-6,5 B 1 35 68,6 103 0-8,0 B 1 38 76,9 104 0-10,0 B 1 43 90,1 105 0-10,0 B 16 43 90,1 106 1-13,0 B 16 50 10,5 108 3-16,0 B 16 55 106,8 109 3-16,0 B 18 V 55 106,8 110 0-10 ST B 16 43 88,5 303 1-13 ST B 16 43 100,3 304 117-118 8 Force transmission with fine thread, chucking sleeve made of plastics, holding fixture made of steel, high true-running accuracy. With hexagonal end for mounting onto the spindle. For clockwise and counterclockwise operation. For rechargeable battery drills and electric hand drills. Keyless Drill Chucks (Plastics) 117 Extra, through-hole, with holding ring. 118 Extra RV, with radial locking, through-hole, with holding ring, impact-proof. Chucking capacity 1,5-13 mm jaws with carbide chucking bevel. 117-118 Clamping width Mounting hole Outside Ø max. machine Power/W 117 118 mm mm no. 117 no. 118 1,0-10 3/8 inch x 4 4,7 450 550 101 101 1,0-10 1/ inch x 0 4,7 450 550 10 10 1,5-13 3/8 inch x 4 4,7 550 1000 103 103 1,5-13 1/ inch x 0 4,7 550 1000 104 104 www.hhw.de 1.5

Drill chuck Fine Drilling Aids Chuck-Ejector Forks Chuck Arbors 1130 Keyless Drill Chucks (Metal) 8 Extra-RV, with radial locking, chucking sleeve made of Metal, with self-start protection and hexagonal end for mounting and removing from the spindle. For clockwise and counterclockwise operation. For hand drills with rechargeable battery and electric screwdrivers and hand drills. 1130 101-10 Through-hole. 1130 103 Through-hole. Jaws with carbide chucking bevel. 1130 104 No through-hole. Jaws with carbide chucking bevel. 1130 101 1130 103 Clamping width Mounting hole Outside Ø max. machine power 1130 mm mm W 1,0-10 3/8 inch x 4 4,7 550 101 1,0-10 1/ inch x 0 4,7 550 10 1,5-13 1/ inch x 0 4,7 1100 103 1,5-13 1/ inch x 0 4,7 1100 104 1151-115 / Keyless, clamping and unclamping by hand, chuck tightens automatically during drilling. Only for clockwise operation. All wear parts are case-hardened, ground and replaceable. 100 % concentricity test with different taper plug-diameters at different measuring heads based on DIN ISO 10888. High-Performance Three-Jaw Drill Chucks SBF 1151 SBF Super-drill chuck, Standard version. B 18 = inside taper shortened by 7 mm. 1151 01 With vernier for presetting. 1151 115 NCBF Special type, with clamping guard. For quick-braking spindles of NC, CNC machines, etc. B 18 = inside taper shortened by 7 mm. 115 Clamping width Internal taper D L 1 L 1151 115 mm DIN ISO 39 B mm mm mm 0-1,5 B 6 19 35,0 37,5 01 0-3,0 B 10 4 44,0 47,5 0 0-5,0 B 10 30 56,0 61,5 03 0-5,0 B 1 30 56,0 61,5 04 0-6,5 B 10 34 61,5 68,0 05 0-6,5 B 1 34 61,5 68,0 06 0-8,0 B 1 38 69,0 77,5 07 0-10,0 B 1 43 80,0 91,0 08 0-10,0 B 16 43 80,0 91,0 09 101 1-13,0 B 16 50 90,5 103,0 10 10 3-16,0 B 16 56 95,5 109,0 11 3-16,0 B 18 56 95,5 109,0 1 104 1.6 www.hhw.de

Clamping tools 1155 Fine Drilling Aids / With centring pivot B 6 for drill chuck cat.-no. 1151 01, fine drilling aid without drill chuck, drilling depth = 0 mm. A spring-loaded system returns the chuck to the starting position. For highly accurate drilling of very small holes by hand, also suited for large machines. 1155 101 1155 10 Shank Ø D Ø d L 1 L 1155 mm mm mm mm 13 mm Ø 13 30 66 80 101 MT 1 1 30 8 96 10 1160 Chuck-Ejector Forks / For easy separation of the chuck from its mount. Prevents damage to spindle or chuck. 1160 for B taper a b c d e 1160 mm mm mm mm mm B 6 10 0 7,0 8 101 B 10, B 1 170 30 11,0 13,0 10 10 B 16, B 18 10 40 16,7 18,7 1 103 1170 Chuck Arbors With taper in compliance with DIN 38, for mounting of chucks. Hardened and ground. 1170 MT/drill chuck 1170 Taper 1/B 10 01 1/B 1 0 1/B 16 03 /B 10 10 /B 1 11 /B 16 1 /B 18 13 MT/drill chuck 1170 Taper 3/B 1 0 3/B 16 1 3/B 18 3/B 3 4/B 16 31 4/B 18 3 5/B 18 4 1177 Chuck Arbors With mounting taper in compliance with DIN ISO 39 B, with straight shank. Precision guiding with a true-running accuracy small equal to µm. 1177 Mounting taper Ø x Length 1177 mm B 1 10 x 50 101 B 16 1 x 60 10 B 16 16 x 50 103 B 18 16 x 70 104 www.hhw.de 1.7

Short chucks. Tool adapters in compliance with DIN 69871 Shanks for machining centres and NC machines. Alloyed case-hardened steel, min. tensile strength 950 N/mm. Taper angle tolerance more exact than AT3. Case-hardened 60- HRC. Working surfaces ground. DIN 69871 part 1. Shape A: without through-hole, Shape AD: with through-hole for central coolant feed, Shape AD/B: with through-hole for central coolant feed and boreholes at the flange for lateral coolant feed, Shape B: with boreholes at the flange for lateral coolant feed. ST d1 G d5 H7 d max d3 l1 l l3 l4 l5 l6 d6 e mm mm mm mm mm mm mm mm mm mm mm mm 30 31,75 M 1 13 45 50,0 47,8 16,4 19,0 15,0 5,5 4 4 1 40 44,45 M 16 17 50 63,55 68,4,8 5,0 18,5 8, 3 4 7 50 69,85 M 4 5 80 97,5 101,75 35,5 37,7 30,0 11,5 47 6 4 100 Short type, wear parts hardened and ground. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Precision Short Chucks 100 Taper Clamping range L D 100... ST mm mm mm 30 1,0-13 90 50 01 40 1,5-16 95 50 03 50 1,5-16 95 50 05 1185 Short Chucks AKL / 100 % concentricity tested, based on DIN ISO 10888, worm gearing for high chucking forces. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Draw-in bolts see cat.-no. 1733-1740. Other balancing grades available on request. ULTRA with true-running accuracy less or equal to 0,015 mm available on request. 1185 30 Taper Clamping range A D1 D L1 L 1185 ST mm mm mm mm mm mm 40 0,5-10 69 38 45 78 37,5 30 40 1,0-16 80 50-9 - 303 50 1,0-16 80 50-9 - 304 1.8 www.hhw.de

1190 0 Short type, wear parts hardened, high true-running accuracy. Wrench with T-handle for high power. For clockwise and counterclockwise operation. Precision Short Chucks Draw-in bolts see cat.-no. 1733-1740. Fine balancing up to 35.000 rpm available on request. Clamping tools 1190 Taper Clamping range D L L 1 max. 1190 ST mm mm mm mm 40 1,0-13 50 90 96 101 40,5-16 57 95 101 10 1191 0 Short type, wear parts hardened, clamping range 1-16 mm. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Precision Short Chuck 1-16 mm Draw-in bolts see cat.-no. 1733-1740. 1191 Taper Clamping range A D 1191... ST mm mm mm 40 1-16 80 50 101 10 3 Short type, wear parts hardened. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Precision Short Chucks Draw-in bolts see cat.-no. 1733-1740. 10 Taper Clamping range A D E 10 ST mm mm mm mm 40 0,5-13 80,0 48,5 9 01 40,5-16 80,0 51,0 9 0 106 Ü Short, sturdy, and slim design. High chucking forces thanks to gear reduction, high precision and truerunning accuracy. Incl. of wrench with T-handle for high power. Precision Short Chucks For clockwise and counterclockwise operation. Draw-in bolts see cat.-no. 1733-1740. 106 Taper Clamping range l 1 d 1 l 106 ST mm mm mm mm 40 1,0-13 87,5 43 95,5 101 40,5-16 104,5 56 109,5 10 50 1,0-13 87,5 43 95,5 103 50,5-16 106,5 56 111,5 104 www.hhw.de 1.9

Short chucks Tapping Chucks Collet chucks 11 3 Extremely short type, high true-running accuracy. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. High-Performance Precision Short Chuck Draw-in bolts see cat.-no. 1733-1740. 11 Taper Clamping range A D E 11 ST mm mm mm mm 40 0,5-13 80 48,5 9 101 40 3,0-16 80 51,0 9 10 50 0,5-13 110 48,5 9 103 50 3,0-16 110 51,0 9 104 115 3 Extremely short type, high true-running accuracy. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Precision Short Chucks Draw-in bolts see cat.-no. 1733-1740. 115 Taper Clamping range A D E 115 ST mm mm mm mm 40 0,5-13 80 48,5 9 01 40 3,0-16 80 51,0 9 03 50 1,0-13 110 48,5 9 05 50 3,0-16 110 51,0 9 07 1450 O WFLC. Precision version with length compensation in response to compression and tension. Quick-Change Tapping Chucks 1450 Quick-change sleeves see cat.-no. 1459-1463. Draw-in bolts see cat.-no. 1733-1740. Taper for taps suitable Length compensation L D D 1450 ST drill inserts/size compr./tension mm mm mm mm 40 M 3 - M 1 1 7,5/7,5 65 39 19 01 40 M 6 - M 0 10,0/10,0 103 60 31 0 50 M 8 - M 0 10,0/10,0 88 60 31 04 50 M 14 - M 33 3 17,5/17,5 134 86 48 05 1456 With Length compensation in response to compression and tension. Quick-Change Tapping Chucks Draw-in bolts see cat.-no. 1733-1740. 1456 Quick-change sleeves see cat.-no. 1459-1463. Taper for taps suitable Length compensation L D D 1456 ST drill inserts/size compr./tension mm mm mm mm 40 M 3 - M 1 1 9,0/9,0 60 38 19 101 40 M 6 - M 0 15,0/15,0 100 55 31 10 40 M 14 - M 33 3 4,0/4,0 138 79 48 103 50 M 3 - M 1 1 9,0/9,0 6 38 19 104 50 M 6 - M 0 15,0/15,0 83 55 31 105 1.10 www.hhw.de

1506-1510 ER Collet Chucks Set Set consists of: 1 high-performance drilling and milling chuck 3-6 mm, chucking capacity type ER 40, 1 ea. collet, slit in two planes, type 47 E, 4 / 5 / 6 / 8 / 10 / 1 / 14 / 16 / 18 / 0 / / 4 / 5 mm Ø, and wrench. in plastic case. Shank 1506... 1510... ST 40-10 - plastic case, empty 107 Clamping tools 1506 10 151 ER Collet Chucks Precision version. External and internal taper ground, high true-running accuracy. For clamping tools with straight shank in collets DIN 6499-shape A and B. Collets sets see cat.-no. 1519, collets see cat.-no. 150-155 and 1534-1539. Draw-in bolts see cat.-no. 1733-1740. 151 304-30 0 Fine balancing G,5-5.000 rpm, stainless coating. With Balluf-Chip borehole. 151 03-7 Balanced G 6,3-1.000 rpm. 151 309 151 08 0 Taper Size Clamping range Collets A D 151... 151 ST mm mm mm 30 ER 3-0 ER 3/470 E 70 50 03 40 ER 16 1-10 ER 16/46 E 63 3 304 04 40 L ER 16 1-10 ER 16/46 E 100 3 305 05 40 XL ER 16 1-10 ER 16/46 E 160 3 306 06 40 ER 5-16 ER 5/430 E 60 4 307 07 40 L ER 5-16 ER 5/430 E 100 4 315 15 40 XL ER 5-16 ER 5/430 E 160 4 316 16 40 ER 3-0 ER 3/470 E 70 50 308 08 40 L ER 3-0 ER 3/470 E 100 50 317 17 40 XL ER 3-0 ER 3/470 E 160 50 318 18 40 ER 40 3-6 ER 40/47 E 80 63 309 09 40 L ER 40 3-6 ER 40/47 E 100 63 319 19 40 XL ER 40 3-6 ER 40/47 E 160 63 30 0 50 ER 16 1-10 ER 16/46 E 100 3 10 50 L ER 16 1-10 ER 16/46 E 160 3 11 50 ER 5-16 ER 5/430 E 60 4 1 50 L ER 5-16 ER 5/430 E 100 4 50 XL ER 5-16 ER 5/430 E 160 4 3 50 ER 3-0 ER 3/470 E 70 50 1 50 L ER 3-0 ER 3/470 E 100 50 4 50 XL ER 3-0 ER 3/470 E 160 50 5 50 ER 40 3-6 ER 40/47 E 80 63 13 50 L ER 40 3-6 ER 40/47 E 100 63 6 50 XL ER 40 3-6 ER 40/47 E 160 63 7 151 17 151 18 1500 ER Collet Chucks slim Clamping nut fine balanced for HSC, ER11 throughhole core-drilled, after the hardening, the shank was turned once more. With Balluf-Chip borehole. For clamping tools with straight shank in collets DIN 6499-shape A and B. Collets sets see cat.-no. 1519, collets see cat.-no. 150-155 and 1534-1539. Draw-in bolts see cat.-no. 1733-1740. HSC 1500 Taper Size Clamping range Collets A D 1500... ST mm mm mm 40 L ER 11 1-7 ER 11/4008 E 100 16 101 40 XL ER 11 1-7 ER 11/4008 E 160 16 10 40 L ER 16 1-10 ER 16/46 E 100 103 40 XL ER 16 1-10 ER 16/46 E 160 104 40 L ER 5 1-16 ER 5/430 E 100 35 105 40 XL ER 5 1-16 ER 5/430 E 160 35 106 www.hhw.de 1.11

Chuck extensions Collet chucks 1515 ER Chuck Extensions Cylindrical tool holder with Weldon shank, smallest dimensions. Extension of Weldon mounts and/or collet chucks. 1515 Clamping range Shank Ø d Collets L D 1515 mm mm mm mm 1-7 16 ER 11/4008 E 16 16 101 1-10 0 ER 16/46 E 178 10 1-13 5 ER 0/48 E 190 8 103 1507-1508 Collet chuck Centro P * External and internal taper ground. Concentricity and repeatability 0,003 mm (with GER-HP collets). Concentricity and repeatability 0,006 mm (with GER collets). Clamping nut not included. For high-precision clamping of tools with straight shank, without concentricity and clamping force loss, up to shank tolerance h10. 1507 Slim design. 1507 Taper Size Clamping range Collets Dimension D Dimension A Insertion depth Insertion depth 1507 ST mm mm mm E* mm F** mm 40 CP 16 1-10 ER 16/46 E 30 70110 103 40 L CP 16 1-10 ER 16/46 E 30 100 140 104 40 XL CP 16 1-10 ER 16/46 E 30 160 00 105 40 CP 5-16 ER 5/430 E 40 70 110 108 40 L CP 5-16 ER 5/430 E 40 100 113 109 40 XL CP 5-16 ER 5/430 E 40 160 118 110 40 CP 3-0 ER 3/470 E 50 70 111 55 113 40 L CP 3-0 ER 3/470 E 50 100 114 55 114 40 XL CP 3-0 ER 3/470 E 50 160 119 55 115 50 CP 3-0 ER 3/470 E 50 70 10 6 116 50 L CP 3-0 ER 3/470 E 50 100 150 58 117 50 XL CP 3-0 ER 3/470 E 50 160 00 58 118 * Dimension E for tool shanks less than 16 mm ** Dimension F for tool shanks bigger than 16 mm Collets with square drive are not suitable for taps. Clamping nuts and wrench see cat.-no. 1509. GER-HP collets see cat.-no. 1546-1551. GER collets see cat.-no. 1534-1539. Draw-in bolts see cat.-no. 1733-1740. 1508 Mely slim design. 1508 Taper Size Clamping range Collets Dimension D Dimension A Insertion depth E 1508... ST mm mm mm mm 40 CP 11 M 1-7 ER 11/4008 E 16 100 68 101 40 CP 11 M 1-7 ER 11/4008 E 16 160 68 10 1509 * Use clamping nuts Centro P (cat.-no. 1509 10-106 and 00-006) only in conjunction with roller spanners (cat.-no. 1509 0-06) and/or roller bearing heads (cat.-no. 1509 30-306). Accessories for Collet Chucks Centro P 1509 101 Miniature clamping nut 1509 10-106 Standard clamping nut Standard clamping nuts for sealing discs Size for Ø D 1509 1509... collets mm HPC 11 M ER 11/4008 E 16 101 HPC 16 ER 16/46 E 30 10 HPC 5 ER 5/430 E 40 104 HPC 3 ER 3/470 E 50 106 HPC 16-DI ER 16/46 E 30 00 HPC 5-DI ER 5/430 E 40 004 HPC 3-DI ER 3/470 E 50 006 1509 00-006 Clamping nuts for sealing discs 1509 0-06 Roller spanner 1509 101 1509 30-306 Torque roller bearing heads 1509 10-106 1.1 www.hhw.de

Roller clamp Size For 1509... Clamping nut RO 30 HPC 16 0 RO 40 HPC 5 04 RO 50 HPC 3 06 Roller bearing heads Size For Insert mounts 1509... Clamping nut mm DRO 30 HPC 16 9 x 1 30 DRO 40 HPC 5 14 x 18 304 DRO 50 HPC 3 14 x 18 306 1513 * Vulcanised sealing discs up to 80 bar. 0,5 mm clamping Ø extension (+0,4/-0,1). Not suitable for other sealing disc systems! Sealing discs with 0,5 mm increments available on request. Sealing Discs for ER Clamping Nuts Centro P 1513 101-110 For type HPC 16-DI D x L 1,6 x mm 1513 0-16 For type HPC 5-DI D x L 0, x mm 1513 30-30 For type HPC 3-DI D x L 6, x mm Clamping tools 1509 0-06 1509 30-306 1513 for HPC 16-Di for HPC 5-Di for HPC 3-Di Size = clamping Ø 1513... 1513... 1513... mm 1 101 10 0 30 3 103 03 303 4 104 04 304 5 105 05 305 6 106 06 306 7 107 07 307 8 108 08 308 9 109 09 309 10 110 10 310 1540-1544 OZ Collet Chuck Set Set consists of: 1 drilling and milling collet chuck - 5 mm clamping range, 1 ea. collet type 46 E 4 / 6 / 8 / 10 / 1 / 14 / 16 / 18 / 0 / / 4 and 5 mm Ø and hook wrench. In plastic case. for HPC 16-Di for HPC 5-Di for HPC 3-Di Size = clamping Ø 1513... 1513... 1513... mm 11 11 311 1 1 31 13 13 313 14 14 314 15 15 315 16 16 316 17 317 18 318 19 319 0 30 1544 10 Shank 1544... 1540... ST 40 10 - plastic case, empty 05 1543 OZ Collet Chucks External and internal taper ground, ball-bearing mounted union nut. Incl. of clamping nut. For the clamping of tools with straight shank in collets DIN 6388. ST 30 is delivered in the AD version. Collets see cat.-no. 15-154. Draw-in bolts see cat.-no. 1733-1740. 1543 Taper Clamping range For collets A D 1543 ST mm mm mm 30-16 415 E 60 43 101 40-5 46 E 70 60 103 40 3-3 467 E 90 7 104 50-5 46 E 70 60 105 50 3-3 467 E 80 7 106 www.hhw.de 1.13

Power chucks Hydro expansion chucks Reduction sleeves Shrinking chucks 1577 Power Chucks 0 Clamping nut with needle roller cage, robust design, simple in presetting and application. High true-running accuracy, torque transmission and stability. Thanks to reductions, usable from 3-3 mm. incl. of clamping nut. For clamping tools with straight shank. Also suitable for clamping Weldon shanks. Particularly suited for roughing. Reduction sleeves see cat.-no. 158. Wrench see cat.-no. 50650. Draw-in bolts see cat.-no. 1733-1740. 1577 Taper d D A L 1577 ST mm mm mm mm 40 0 48 60 41 101 40 3 66 95 8 10 Taper d D A L 1577 ST mm mm mm mm 50 0 48 80 61 103 50 3 66 75 56 104 1580 0 High true-running accuracy and torque transmission. Low maintenance thanks to enclosed clamping system. Material 1600-1800 N/mm tensile strength, hardened (5+ HRC). Max. coolant pressure 80 bar, axial length adjustment 10 mm. Advantages: anti-vibration clamping, increase of tool life, reduction of micro breaks of the tool cutting edge, easy handling, high positioning and repetition accuracy, flexible thanks to the usage of reduction sleeves. Hydro expansion Chucks Incl. of hexagon T-handle wrench. For drilling, reaming, and milling. Also suitable for clamping of Weldon and Whistle- Notch shanks. Reduction sleeves see cat.-no. 1581. Cylinder cleaner see cat.-no. 956. Draw-in bolts see cat.-no. 1733-1740. 1580 101-10 Short, heavy. 1580 301-317 Short, slim. 1580 101-10 Taper d1 d l1 l l3 g Weight 1580... ST mm mm mm mm mm kg 40 0 49,5 64,5 51 10 M 16 x 1 1,3 101 50 3 7,0 81,0 61 10 M 16 x 1 3,9 10 Taper d1 d d3 l1 l l3 l4 g 1580 ST mm mm mm mm mm mm mm 40 6 6 49,5 80,5 37 10 9,5 M 5 301 40 8 8 49,5 80,5 37 10 30,0 M 6 30 40 10 30 49,5 80,5 41 10 35,0 M 8 x 1 303 40 1 3 49,5 80,5 46 10 40,0 M 10 x 1 304 40 14 34 49,5 80,5 46 10 40,0 M 10 x 1 305 40 16 38 49,5 80,5 49 10 45,0 M 1 x 1 306 40 18 40 49,5 80,5 49 10 46,0 M 1 x 1 307 40 0 4 49,5 80,5 51 10 47,0 M 16 x 1 308 50 6 6 49,5 80,5 37 10 9,5 M 5 310 50 8 8 49,5 80,5 37 10 30,0 M 6 311 50 10 30 49,5 80,5 41 10 35,0 M 8 x 1 31 50 1 3 49,5 80,5 46 10 40,0 M 10 x 1 313 50 14 34 49,5 80,5 46 10 40,0 M 10 x 1 314 50 16 38 49,5 80,5 49 10 45,0 M 1 x 1 315 50 18 40 49,5 80,5 49 10 46,0 M 1 x 1 316 50 0 4 49,5 80,5 51 10 4,0 M 16 x 1 317 1581-158 0 1581 With sealing ring for hydro expansion chucks. Reduction sleeves 158 Without sealing ring for power chucks. 1581 1580 301-317 158 Suitable Reduc. 1581 158... for D 1 mm for D mm 0 3 098 098 0 4 099 099 0 5 100 100 0 6 101 101 0 8 10 10 0 10 103 103 0 1 104 104 Suitable Reduc. 1581 158... for D 1 mm for D mm 0 14 105 105 0 16 106 106 3 3 110 3 4 111 3 5 11 3 6 113 113 3 8 114 114 Suitable Reduc. 1581 158... for D 1 mm for D mm 3 10 115 115 3 1 116 116 3 14 117 117 3 16 118 118 3 18 119 119 3 0 10 10 3 5 11 11 1.14 www.hhw.de

Clamping tools 1596 Shrinking Chucks Highest true-running accuracy and taper tolerance. Manufactured in climatised environment. Advantages: high chucking forces and long service life thanks to the usage of high-quality hot working steel and special heat treatment. Coated for stainlessness. Patented nominal-size increase allows for an automatic shrinking and facilitated handling. Suitable for clamping carbide, HSS, and steel shanks with a tolerance of h6. Extension pieces see cat.-no. 1598. Draw-in bolts see cat.-no. 1733-1740. Shrinking machines see cat.-no. 1584-1595. 1596 701-7 Slim. patented nominal-size Taper d1 d d3 l1 l A V g 1596 ST mm mm mm mm mm mm mm 40 3 15 0 0 3 80 5 M 6 498 40 4 15 0 0 3 80 5 M 6 499 40 5 15 0 5 3 80 5 M 6 500 40 6 0 7 36 45 80 10 M 5 501 40 8 0 7 36 45 80 10 M 6 50 40 10 4 3 4 50 80 10 M 8 x 1 503 40 1 4 3 47 50 80 10 M 8 x 1 504 40 14 7 34 47 50 80 10 M 10 x 1 505 40 16 7 34 50 50 80 10 M 1 x 1 506 40 18 33 4 50 57 80 10 M 1 x 1 507 40 0 33 4 5 57 80 10 M 16 x 1 508 40 5 44 50 58 60 100 10 M 16 x 1 509 40 3 44 50 6 38 100 10 M 16 x 1 510 40 L 6 1 7 36 45 10 10 M 5 550 40 L 8 1 7 36 45 10 10 M 6 551 40 L 10 4 3 4 50 10 10 M 8 55 40 L 1 4 3 47 50 10 10 M 8 553 40 L 14 7 34 47 50 10 10 M 8 554 40 L 16 7 34 50 50 10 10 M 1 555 40 L 18 33 4 50 57 10 10 M 1 556 40 L 0 33 4 5 57 10 10 M 16 557 40 XL 6 0 7 36 45 160 10 M 5 601 40 XL 8 0 7 36 45 160 10 M 6 60 40 XL 10 4 3 4 50 160 10 M 8 x 1 603 40 XL 1 4 3 47 50 160 10 M 8 x 1 604 40 XL 14 7 34 47 50 160 10 M 8 x 1 605 40 XL 16 7 34 50 50 160 10 M 1 x 1 606 40 XL 18 33 4 50 57 160 10 M 1 x 1 607 40 XL 0 33 4 5 57 160 10 M 16 x 1 608 1596 498-608 slim Taper d1 d d3 l1 NL A V g 1596... ST mm mm mm mm mm mm mm 40 3 9 13 0 60 83 5 M 6 701 40 4 10 14 0 60 83 5 M 6 70 40 6 1 18 36 60 83 5 M 5 703 40 8 14 0 36 60 83 5 M 6 704 40 10 16 4 60 83 5 M 8 x 1 705 40 1 18 4 47 60 83 5 M 10 x 1 706 40 16 8 50 60 83 5 M 1 x 1 707 40 0 7 33 5 60 83 5 M 16 x 1 708 40 L 3 9 16 0 100 13 5 M 6 709 40 L 4 10 17 0 100 13 5 M 6 710 40 L 6 1 36 100 13 5 M 5 711 40 L 8 14 4 36 100 13 5 M 6 71 40 L 10 16 6 4 100 13 5 M 8 x 1 713 40 L 1 18 8 47 100 13 5 M 10 x 1 714 40 L 16 3 50 100 13 5 M 1 x 1 715 40 L 0 7 37 5 100 13 5 M 16 x 1 716 40 XL 6 1 6 36 140 163 5 M 5 717 40 XL 8 14 8 36 140 163 5 M 6 718 40 XL 10 16 30 4 140 163 5 M 8 x 1 719 40 XL 1 18 3 47 140 163 5 M 10 x 1 70 40 XL 16 36 50 140 163 5 M 1 x 1 71 40 XL 0 7 41 5 140 163 5 M 16 x 1 7 1596 701-7 www.hhw.de 1.15

Toolholders Taper sleeves Milling sleeves 17676 Tool holder for Screw-in Milling Cutters Precision version. External taper and fit ground. For mounting screw-in milling cutters with thread. Draw-in bolts see cat.-no. 1733-1740. 17676 d 3 ST d 1 d D L A 17676 mm mm mm mm mm mm M 6 40 6,5 10 13 5 44 101 M 6 40 6,5 10 0 50 69 10 M 6 40 6,5 10 3 75 94 103 M 8 40 8,5 13 15 5 44 104 M 8 40 8,5 13 3 50 69 105 M 8 40 8,5 13 3 75 94 106 M 8 40 8,5 13 5 100 119 107 M 10 40 10,5 18 0 5 44 108 M 10 40 10,5 18 3 50 69 109 M 10 40 10,5 18 8 75 94 110 M 10 40 10,5 18 3 100 119 111 M 1 40 1,5 1 4 5 44 11 M 1 40 1,5 1 31 75 94 113 M 1 40 1,5 1 36 15 144 114 M 16 40 17,0 9 9 5 44 115 M 16 40 17,0 9 34 75 94 116 M 16 40 17,0 9 40 15 144 117 www.atorn.com Performance requires quality. Solid carbide milling cutters by ATORN: ATORN s high-quality milling tools. 1.16 www.hhw.de

1601 Precision version. For mounting drill chucks in milling machines. Draw-in bolts see cat.-no. 1733-1740. Tool Adapters for Drill Chucks Taper Mount d 1 l l 1 1601 ST DIN 38 mm mm 40 B 16 5 93,4 301 50 B 16 5 16,75 303 Clamping tools 1601 1609 Taper Sleeves Precision version. For mounting tools with MT shank and drive tang. 1609 07 Draw-in bolts see cat.-no. 1733-1740. 1609 04-10 0 Fine balancing G,5-5.000 rpm, stainless coating. With Balluf-Chip borehole. 1609 305 1609 301-319 Balanced G 6,3-1.000 rpm. 1609 306 0 External taper Internal taper l l1 d1 1609 1609... ST MT mm mm mm 30 1 50 97,8 5 301 30 65 11,8 3 30 30 3 80 17,8 40 303 40 1 50 118,4 5 04 304 40 50 118,4 3 05 305 40 L 117 184,5 3 06 306 40 3 70 138,4 40 07 307 40 3L 133 01,4 40 08 308 40 4 95 163,4 48 09 309 40 4L 156 4,4 48 10 310 0 External taper Internal taper l l1 d1 1609 1609... ST MT mm mm mm 50 1 45 146,75 5 311 50 60 161,75 3 31 50 L 117 18,75 3 313 50 3 65 116,75 40 314 50 3L 137 38,75 40 315 50 4 95 196,75 48 316 50 4L 167 68,75 48 317 50 5 105 06,75 63 318 50 5L 197 98,75 63 319 1613 Milling Sleeves Precision version with built-in draw-in screw. For mounting tools with MT shank and draw-in thread. Draw-in bolts see cat.-no. 1733-1740. 1613 External taper Internal taper Draw-in thread A D 1613 ST MT internal mm mm 40 1 M 6 50 5 101 40 M 10 50 3 10 40 3 M 1 70 40 103 40 4 M 16 95 48 104 50 M 10 60 3 106 50 3 M 1 65 40 107 50 4 M 16 70 48 108 www.hhw.de 1.17

Adapter sleeves Collet chucks Collets Milling cutter mounts 1618 Precision version with built-in draw-in screw. For mounting and extending ST shanks. Draw-in bolts see cat.-no. 1733-1740. Adapter Sleeves 1618 External taper Internal taper Draw-in Thread Draw-in Thread l l 1 d 1 1618 ST ST external internal mm mm mm 40 40 M 16 M 16 100 168,40 63 0 50 40 M 4 M 16 70 171,75 70 03 50 50 M 4 M 4 10 1,75 97 04 165 HG Collet Chucks Haimer High-precision chuck, reliable clamping, high truerunning accuracy. With clamping screw and extraction hook. Very suitable for high-speed machining. For clamping tools with straight shank. HG collets see cat.-no. 167. Draw-in bolts see cat.-no. 1733-1740. HSC 165 107 165 108 Taper Size A Ø D for HG collet Ø 165 ST mm mm cat.-no. 167 40 1 65 30 3 / 4 / 5 / 6 / 8 101 40 L 1 100 30 3 / 4 / 5 / 6 / 8 10 50 1 65 30 3 / 4 / 5 / 6 / 8 104 50 L 1 100 30 3 / 4 / 5 / 6 / 8 105 40 70 35 10 / 1 / 14 107 40 L 100 35 10 / 1 / 14 108 Taper Size A Ø D for HG collet Ø 165 ST mm mm cat.-no. 167 50 70 35 10 / 1 / 14 110 50 L 100 35 10 / 1 / 14 111 40 3 75 48 16 / 18 / 0 113 40 L 3 100 48 16 / 18 / 0 114 50 3 75 48 16 / 18 / 0 116 50 L 3 100 48 16 / 18 / 0 117 167 HG Collets Haimer Spring steel hardened, ground, and coated. For HG chucks and shank tolerances h6. 167 clamping Ø for 167 mm size 3 1 101 4 1 10 5 1 103 6 1 104 8 1 105 10 106 clamping Ø for 167 mm size 1 107 14 108 16 3 109 18 3 110 0 3 111 1.18 www.hhw.de

1631-163 Milling Cutter Mounts Clamping tools Precision version, borehole tolerance < 0,004 mm. For clamping tools with lateral driving face in compliance with DIN 1835 B and DIN 6535 HB Draw-in bolts see cat.-no. 1733-1740. Spare screw see cat.-no. 1635. 1631 0 Fine balancing G,5-5.000 rpm, stainless coating. With Balluf-Chip borehole. 1631 109 163 15 163 Balanced G 6,3-1.000 rpm. 163 16 163 17 0 Taper for milling cutter A D 1631 163... ST shank Ø d mm mm mm 30 6 50 5 101 30 8 50 8 10 30 10 50 35 103 30 1 50 4 104 30 16 63 48 106 30 0 70 5 108 40 6 50 5 09 109 40 L 6 100 5 10 110 40 XL 6 160 5 11 111 40 8 50 8 1 11 40 L 8 100 8 13 113 40 XL 8 160 8 19 114 40 10 50 35 0 115 40 L 10 100 35 1 116 40 XL 10 160 35 117 40 1 50 4 3 118 40 L 1 100 4 4 119 40 XL 1 160 4 5 10 40 14 50 44 6 11 40 L 14 100 44 7 1 40 XL 14 160 44 8 13 40 K 16 35 45 05 40 16 63 48 9 15 40 L 16 100 48 30 16 40 XL 16 160 48 31 17 40 18 63 50 3 19 40 L 18 100 50 33 130 40 XL 18 160 50 34 131 40 K 0 35 45 06 40 0 63 5 35 133 40 L 0 100 5 36 134 40 XL 0 160 5 37 135 40 K 5 35 50 07 40 5 100 63 41 137 0 Taper for milling cutter A D 1631 163... ST shank Ø d mm mm mm 40 L 5 160 63 4 138 40 K 3 65 50 08 40 3 100 7 43 140 40 L 3 160 7 44 40 40 10 80 45 141 50 6 63 5 145 50 L 6 100 5 146 50 XL 6 160 5 147 50 8 63 8 148 50 L 8 100 8 149 50 XL 8 160 8 150 50 10 63 35 151 50 L 10 100 35 15 50 XL 10 160 35 153 50 1 63 4 154 50 L 1 100 4 155 50 XL 1 160 4 156 50 14 63 44 157 50 L 14 100 44 158 50 XL 14 160 44 159 50 16 63 48 160 50 L 16 100 48 161 50 XL 16 160 48 16 50 18 63 50 163 50 L 18 100 50 164 50 XL 18 160 50 165 50 0 63 5 166 50 L 0 100 5 167 50 XL 0 160 5 168 50 5 80 65 169 50 L 5 160 65 170 50 3 100 7 171 50 L 3 160 7 17 50 40 100 80 173 www.hhw.de 1.19

Milling cutter mounts Toolholders Combination milling cutter arbors 160 Extended, slim version. Borehole tolerance < 0,004 mm, after the hardening, the shank was turned once more for smoother operation. With ball joint clamping screw for Weldon and Whistle- Notch. By default with Balluf-Chip borehole. Milling Cutter Mounts slim Through-hole stop screw. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Taper for milling cutter A D D3 D4 160... ST shank Ø D1 mm mm mm mm mm 40 L 6 100 13 18 9 101 40 XL 6 160 13 18 34 10 40 L 8 100 15 0 31 103 40 XL 8 160 15 0 37 104 40 L 10 100 16 1 33 105 40 XL 10 160 16 1 40 106 40 L 1 100 17 35 107 40 XL 1 160 17 43 108 40 L 14 100 19 4 37 109 40 XL 14 160 19 4 45 110 40 L 16 100 1 6 39 111 40 XL 16 160 1 6 47 11 40 L 18 100 3 8 41 113 40 XL 18 160 3 8 49 114 40 L 0 100 5 30 43 115 40 XL 0 160 5 30 50 116 1637 Precision version, borehole tolerance < 0,004 mm, with coolant bore. Advantage: the chips are removed better thanks to the coolant pressure. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Milling Cutter Mounts with Coolant Bore Draw-in bolts see cat.-no. 1733-1740. Spare screw see cat.-no. 1635. Draw-in bolts see cat.-no. 1733-1740. Spare screw see cat.-no. 1635. 160 103 160 104 1637 Taper for milling cutter A D 1637 ST shank Ø d mm mm mm 40 6 50 5 01 40 L 6 100 5 0 40 8 50 8 04 40 L 8 100 8 05 40 10 50 35 07 40 L 10 100 35 08 40 1 50 4 10 40 L 1 100 4 11 40 14 50 44 13 40 L 14 100 44 14 40 16 63 48 16 40 L 16 100 48 17 40 18 63 50 19 40 L 18 100 50 0 40 0 63 5 Taper for milling cutter A D 1637 ST shank Ø d mm mm mm 40 L 0 100 5 3 40 5 100 63 5 40 3 100 7 7 40 40 10 80 9 50 6 63 5 301 50 8 63 8 30 50 10 63 35 303 50 1 63 4 304 50 14 63 44 305 50 16 63 48 306 50 18 63 50 307 50 0 63 5 308 50 5 80 63 309 50 3 100 7 310 50 40 100 80 311 1639 Precision version, high true-running accuracy thanks to surface ground contact surface (accuracy < 0,003 mm). Advantages: Thanks to the offset threaded pin, the contact surface of the drill is drawn towards the enlarged diameter. This provides for an improved support of the tool and therefore for higher feed rates. Toolholder for reversible Cutting Insert solid drilling tool For all solid drilling tools with straight shank DIN 6595 part 1. Draw-in bolts see cat.-no. 1733-1740. Spare screw see cat.-no. 1635. 1639 Taper d A D 1639 ST mm mm mm 40 0 65 40 101 40 5 70 45 10 40 3 75 5 103 Taper d A D 1639 ST mm mm mm 50 0 70 40 104 50 5 70 45 105 50 3 70 5 106 1.0 www.hhw.de

1650 Combination Milling Cutter Arbors Clamping tools Precision version, surface ground contact surface (accuracy < 0,003 mm). Incl. of feather key, driving ring and draw-in screw. With feather key for milling cutters with longitudinal keyway e.g. DIN 841 and driving ring for milling cutters with transverse slot DIN 1880 and milling heads DIN 1830. 1650 604 Draw-in bolts see cat.-no. 1733-1740. Driving rings see cat.-no. 1655. Draw-in screws see cat.-no. 1656 u. 1659. Drawin screw wrenches see cat.-no. 1657. 1650 04 1650 601-614 0 Fine balancing,5-5.000 rpm, stainless coating. With Balluf-Chip borehole. 1650 05 1650 10-50 Balanced 6,3-1.000 rpm 1650 15 0 Taper d A D l 1650... 1650 ST mm mm mm mm 30 16 50 3 17 10 30 50 40 19 103 30 7 55 48 1 104 40 16 55 3 17 601 0 40 L 16 100 3 17 60 03 40 XL 16 160 3 17 603 13 40 55 40 19 604 04 40 L 100 40 19 605 05 40 XL 160 40 19 606 15 40 7 55 48 1 607 06 40 L 7 100 48 1 608 07 40 XL 7 160 48 1 609 17 40 3 60 58 4 610 08 40 L 3 100 58 4 611 09 40 XL 3 160 58 4 61 19 40 40 60 70 7 613 10 40 L 40 100 70 7 614 11 40 XL 40 160 70 7 1 50 16 55 3 17 501 50 L 16 100 3 17 50 50 XL 16 160 3 17 51 50 55 40 19 503 50 L 100 40 19 504 50 XL 160 40 19 514 50 7 55 48 1 505 50 L 7 100 48 1 506 50 XL 7 160 48 1 516 50 3 55 58 4 507 50 L 3 100 58 4 518 50 40 55 70 7 509 50 L 40 100 70 7 510 50 XL 40 160 70 7 50 www.hhw.de 1.1

Milling head mounts Basic mount Boring bar blanks Short chucks 1671 Milling Head Mounts Precision version with enlarged and surface ground contact surface. Short overhang for increased stability. For Shell End Milling Cutters and Milling Cutters with Transverse Keyway. d = 40 and 60 mm additionally with 4 threaded holes for direct mounting. Draw-in bolts see cat.-no. 1733-1740. Draw-in screws see cat.-no. 1656 u. 1659. Draw-in screw wrenches see cat.-no.. 1657. 1671 101-114 0 Fine balancing G,5-5.000 rpm, stainless coating. With Balluf-Chip borehole. 1671 304-410 Balanced G 6,3-1.000 rpm. 0 Taper d A D l 1671... 1671 ST mm mm mm mm 40 16 35 38 17 101 304 40 L 16 100 38 17 10 305 40 35 48 19 104 305 40 L 100 48 19 105 309 40 7 40 58 1 107 306 40 L 7 100 58 1 108 310 40 3 50 78 4 110 307 40 L 3 100 78 4 111 311 40 40 50 88 7 113 308 40 L 40 100 88 7 114 31 50 35 48 19 40 50 L 100 48 19 407 50 7 40 58 1 403 50 L 7 100 58 1 408 50 3 50 78 4 404 50 L 3 100 78 4 409 50 40 50 88 7 405 50 L 40 100 88 7 410 50 60 70 18 40 406 1671 104 1671 306 1671 310 169 ABS -Basic Mount ; Shape B, with sealing disc and modification set for shape AD. For Komet reversible cutting insert solid drilling tools. Taper ABS d L L 1 Weight 169... ST mm mm mm approx. kg 40 40 50 19 1,07 101 40 50 50 30 1,10 10 40 63 90 70,05 103 50 40 60 0 3,30 106 50 50 60 3,30 107 50 63 60 9 3,37 108 169 1683 Boring Bar Blanks ST and shoulder hardened and ground, material 16 MnCr5. For manufacturing special tools. 1683 Taper Boring bar Ø d 1 l 1683 ST mm mm 40 63,0 50 10 50 97,0 315 01 1. www.hhw.de

Clamping tools. Tool holders in compliance with JIS B 6339 (MAS-BT) JIS B 6339 (Japan, former standard > MAS-BT). Taper angle tolerance more exact than AT3. Case-hardened 60- HRC. Working surfaces ground. MAS-BT d1 G d5 H7 d a l1 l l3 l5 l6 mm mm mm mm mm mm mm mm mm 30 31,75 M 1 1,5 46 48,4 16,3 7,0 4 40 44,45 M 16 17,0 63 65,4 7,6 8, 3 50 69,85 M 4 5,0 100 3 101,8 38 35,3 11,0 47 1189 Short Chucks Short type, wear parts hardened and ground. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Draw-in bolts see cat.-no. 1737-1739. 1189 Taper Clamping range L D 1189... MAS-BT mm mm mm 40 1,5-16 103 50 103 50 1,5-16 114 50 105 119 0 Short type, wear parts hardened and ground, clamping range 1-16 mm. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. CNC Short Chucks 1-16 mm Draw-in bolts see cat.-no. 1737-1739. 119 Taper Clamping range A D 119... MAS-BT mm mm mm 40 1-16 88 50 101 www.hhw.de 1.3

Short chucks Tapping Chucks Collet chucks Power chucks Taper sleeves 107 Ü Short, sturdy, and slim design, for clockwise and counterclockwise operation. High chucking forces thanks to gear reduction, high precision and true-running accuracy. Incl. of wrench with T-handle for high power. Precision Short Chucks Draw-in bolts see cat.-no. 1737-1739. Taper with drill chuck l 1 d 1 l 107 MAS-BT mm mm mm mm 40 1,0-13 95,5 43 103,5 101 40,5-16 114,5 56 119,5 10 50 1,0-13 106,5 43 114,5 103 50,5-16 15,5 56 130,5 104 1458 With Length compensation in response to compression and tension. Quick-Change Tapping Chucks Quick-change sleeves see cat.-no. 1459-1463. Draw-in bolts see cat.-no. 1737-1739. 107 1458 Taper for Taps suitable Length compensation L D D 1458 MAS-BT inserts/size compr./tension mm mm mm mm 40 M 3 - M 1 1 9,0/9,0 68 38 19 101 40 M 6 - M 0 15,0/15,0 93 55 31 10 40 M 14 - M 33 3 4,0/4,0 138 79 48 103 50 M 6 - M 0 15,0/15,0 10 55 31 105 1514 ER Collet Chucks ST 40 = shape AD/B ST 50 = shape AD Precision version. Hohe Rundlaufgenauigkeit. For clamping tools with straight shank in collets DIN 6499-shape A and B. Collet sets see cat.-no. 1519. Collets see cat.-no. 150-155 and 1534-1539. Draw-in bolts see cat.-no. 1737-1739. 1514 Taper Size Clamping range Collets l l 1 d 1 1514 MAS-BT mm mm mm mm 40 ER 5 1-16 ER 5/430 E 60 15,4 4 101 40 ER 3-0 ER 3/470 E 70 135,4 50 10 40 ER 40 3-6 ER 40/47 E 80 145,4 63 103 40 ER 3-0 ER 3/470 E 70 171,8 50 104 40 ER 40 3-6 ER 40/47 E 80 181,8 63 105 1545 OZ Collet Chucks Precision version. Ball-bearing mounted union nut. Incl. of clamping nut. For the clamping of tools with straight shank in collets DIN 6388. Collets see cat.-no. 15-154. Draw-in bolts see cat.-no. 1737-1739. 1545 Taper Clamping range for collets A D 1545 MAS-BT mm mm mm 40-5 46 E 70 60 101 40 4-3 467 E 90 7 10 1.4 www.hhw.de

1578 Power chucks 0 Clamping nut with needle roller cage, robust design, simple in presetting and application. High true-running accuracy, torque transmission and stability. Thanks to reductions, usable from 3-3 mm. Incl. of clamping nut. For clamping tools with straight shank. Also suitable for clamping Weldon shanks. Particularly suited for roughing. Reduction sleeves see cat.-no. 158. Wrench see cat.-no. 50650. Draw-in bolts see cat.-no. 1737-1739. Taper d D A L 1578 MAS-BT mm mm mm mm 40 0 48 63 36 101 40 3 66 90 53 10 50 0 48 85 47 103 50 3 66 95 57 104 Clamping tools 1578 160 Precision version. For mounting drill chucks in milling machines. Toolholder for Drill Chuck Draw-in bolts see cat.-no. 1737-1739. 160 Taper Mount d 1 l l 1 160 MAS-BT DIN 38 mm mm 40 B 16 3 97,4 401 1611 Taper Sleeves BT 40 = shape AD/B BT 50 = shape AD Precision version. For mounting tools with MT shank and drive tang. Draw-in bolts see cat.-no. 1737-1739. 1611 External taper Internal taper A l 1 D 1611 MAS-BT MT mm mm mm 40 1 50 115,4 5 101 40 50 115,4 3 10 40 3 70 135,4 40 103 40 4 95 160,4 48 104 50 60 161,8 3 106 50 3 65 166,8 40 107 50 4 95 196,8 48 108 www.atorn.com Performance requires quality. Digital slide callipers by ATORN: ATORN s high-quality measuring tools. www.hhw.de 1.5

Milling cutter mounts Combination milling cutter arbors Basic mount Short chucks Tapping Chucks 1633 Milling Cutter Mounts Precision version, borehole tolerance < 0,004 mm. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Draw-in bolts see cat.-no. 1737-1739. 1633 Taper for milling cutter shank Ø d A D 1633 MAS-BT mm mm mm 40 6 50 5 111 40 8 50 8 11 40 10 63 35 113 40 1 63 4 114 40 14 63 44 115 40 16 63 48 116 40 18 63 50 117 40 0 63 5 118 40 5 90 63 10 40 3 100 7 11 Taper for milling cutter shank Ø d A D 1633 MAS-BT mm mm mm 50 6 63 5 11 50 8 63 8 1 50 10 63 35 13 50 1 80 4 14 50 14 80 44 15 50 16 80 48 16 50 18 80 50 17 50 0 80 5 18 50 5 100 63 0 50 3 105 7 1 50 40 110 80 1651 Precision version, surface ground contact surface (accuracy < 0,003 mm). Incl. of feather key, driving ring and draw-in screw. With feather key for milling cutters with longitudinal keyway e.g. DIN 841 and driving ring for milling cutters with transverse slot DIN 1880 and milling heads DIN 1830. Combination Milling Cutter Arbors Draw-in bolts see cat.-no. 1737-1739. Driving rings see cat.-no. 1655. Draw-in screws see cat.-no. 1656 u. 1659. Drawin screw wrenches see cat.-no. 1657. 1651 Taper d l 4 l 3 d 1 I 5 I 1651 MAS-BT mm mm mm mm mm mm 40 16 55 45 3 17 7 30 40 55 43 40 19 31 303 40 7 55 43 48 1 33 304 40 3 60 46 58 4 38 305 40 40 60 46 70 7 41 306 50 70 58 40 19 31 403 50 7 70 58 48 1 33 404 50 3 70 56 58 4 38 405 50 40 70 56 70 7 41 406 1694 ABS -Basic Mount ; Shape B, with sealing disc and modification set for shape AD. For Komet reversible cutting insert solid drilling tools. Draw-in bolts see cat.-no. 1737-1739. 1694 Taper ABS d L L 1 Weight 1694... MAS-BT mm mm mm approx. kg 40 40 60 33 1,1 101 40 50 60 33 1,9 10 40 63 70 43 1,68 103 50 40 70 4 3,86 105 50 50 70 4 4,07 106 50 63 80 37 4,33 107 1.6 www.hhw.de

Clamping tools. Tool Adapters in Compliance with DIN 080 ST shank ST 30 - ST 50 with internal draw-in thread, manual clamping and lock ring for automatic clamping DIN 080. Alloyed case-hardened steel, min. tensile strength 950 N/mm. Taper angle tolerance more exact than AT3. Case-hardened 60- HRC. Working surfaces ground. SK d1 a b k G d d3 d4 l1 l l3 l4 l5 mm mm mm mm mm mm mm mm mm mm mm mm 30 31,75 1,6 16,1 8 M 1 50,0-17,1 68,4 16, - - 4 40 44,45 1,6 16,1 10 M 16 63,0 1,1 5,0 93,4,5 7 8 3 50 69,85 3, 5,7 1 M 4 97,5 3,0 39,3 16,8 35,3 13 115 47 1184 / 100 % concentricity tested, based on DIN ISO 10888, worm gearing for high chucking forces. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation and quick-breaking spindles. Short Chucks AKL 1-16 mm Other balancing grades available on request. 1184 Taper Clamping range A D1 L1 1184 ST mm mm mm mm 40 1-16 73 50 85 301 105 Short Chucks Ü Short, sturdy, and slim design. High chucking forces thanks to gear reduction, high precision and true-running accuracy. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. 105 Taper Clamping range l 1 d 1 l 105 ST mm mm mm mm 40 1,0-13 80,0 43 88,0 101 40,5-16 97,0 56 10,0 10 1455 with Length compensation in response to compression and tension. Quick-Change Tapping Chucks Quick-change sleeves see cat.-no. 1459-1463. Draw-in bolts see cat.-no. 1733-1740. 1455 Taper for Thread suitable Length compensation L D D 1455 ST drill inserts/size compr./tension mm mm mm mm 40 M 3 - M 1 1 9,0/9,0 53 38 19 01 40 M 6 - M 0 15,0/15,0 77 55 31 0 40 M 14 - M 33 3 4,0/4,0 118 79 48 03 50 M 6 - M 0 15,0/15,0 79 55 31 05 www.hhw.de 1.7

Collet chucks Taper sleeves Milling sleeves Adapter sleeve 1510 ER Collet Chucks Set Set consists of: 1 high-performance drilling and milling chuck 3-6 mm, chucking capacity type ER 40, 1 ea. collet, slit in two planes, type 47 E, 4 / 5 / 6 / 8 / 10 / 1 / 14 / 16 / 18 / 0 / / 4 / 5 mm Ø, and wrench. in plastic case. 1510 101 Shank 1510 ST 40 101 plastic case, empty 107 1511 ER Collet Chucks Precision version. Hohe Rundlaufgenauigkeit. For clamping tools with straight shank in collets DIN 6499-shape A and B. Collet sets see cat.-no. 1519. Collets see cat.-no. 150-155 and 1534-1539. 1511 107-108 Taper Size Clamping range Collets l l 1 d 1 1511 ST mm mm mm mm 30 ER 3-0 ER 3/470 E 50 118,4 50 10 40 ER 3-0 ER 3/470 E 50 143,4 50 107 40 ER 40 4-6 ER 40/47 E 80 173,4 63 108 1540 OZ Collet Chuck Set Set consists of: 1 drilling and milling collet chuck - 5 mm clamping range, 1 ea. collet type 46 E 4 / 6 / 8 / 10 / 1 / 14 / 16 / 18 /0 / / 4 and 5 mm Ø and hook wrench. In plastic case. 1540 01 Shank 1540 ST 40 01 plastic case, empty 05 154 With ball-bearing mounted union nut. Incl. of clamping nut. For the clamping of tools with straight shank in collets DIN 6388. OZ Collet Chucks Collets see cat.-no. 15-154. 154 Taper Clamping range for collets l d 1 154 ST mm mm mm 30-16 415 E 50 43 101 40-5 46 E 66 60 103 40 4-3 467 E 95 7 104 50-5 46 E 71 60 105 50 4-3 467 E 73 7 106 1.8 www.hhw.de

1600 Precision version. For mounting drill chucks in milling machines. Tool Adapters for Drill Chucks Clamping tools 1600 Taper Mount d 1 l l 1 1600 ST DIN 38 mm mm 40 B 16 17 110,4 101 50 B 16 0 146,8 103 1606 Taper Sleeves Precision version. For mounting tools with MT shank and drive tang. 1606 10 External taper Internal taper l l 1 d 1 1606 ST MT mm mm mm 30 50 118,4 3 101 40 1 50 143,4 5 10 40 50 143,4 3 103 40 3 65 158,4 40 105 40 4 95 188,4 48 107 161 Milling Sleeves Precision version with built-in draw-in screw. For mounting tools with MT shank and draw-in thread. External taper Internal taper l l 1 d 1 1606 ST MT mm mm mm 50 1 45 171,8 5 109 50 60 186,8 3 110 50 3 65 191,8 40 11 50 4 70 196,8 48 114 50 5 105 31,8 63 116 161 External taper Internal taper Draw-in thread A D 161 ST MT Internal mm mm 40 M 10 50 3 10 40 3 M 1 65 40 103 40 4 M 16 95 48 104 1617 Precision version with built-in draw-in screw. For mounting and extending ST shanks. Adapter Sleeve 1617 External taper Internal taper Draw-in thread Draw-in thread l l 1 d 1 1617 ST ST external internal mm mm mm 50 40 M 4 M 16 50 176,8 70 03 www.hhw.de 1.9

Milling cutter mounts Arbors Milling head mounts Basic mount 1630 Precision version, borehole tolerance < 0,004 mm. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Milling Cutter Mounts 1630 Taper for milling cutter shank Ø d A D 1630 ST mm mm mm 40 6 50 5 01 40 8 50 8 0 40 10 50 35 03 40 1 50 4 04 40 14 50 44 05 40 16 63 48 06 40 18 63 50 07 40 0 63 5 08 40 5 80 63 10 40 3 80 7 11 Taper for milling cutter shank Ø d A D 1630 ST mm mm mm 50 6 63 5 401 50 8 63 8 40 50 10 63 35 403 50 1 63 4 404 50 14 63 44 405 50 16 63 48 406 50 18 63 50 407 50 0 63 5 408 50 5 80 63 410 50 3 80 7 411 50 40 90 80 41 1649 Precision version, surface ground contact surface (accuracy < 0,003 mm). Incl. of feather key, driving ring and draw-in screw. With feather key for milling cutters with longitudinal keyway e.g. DIN 841 and driving ring for milling cutters with transverse slot DIN 1880 and milling heads DIN 1830. Combination Milling Cutter Arbors Driving rings see cat.-no. 1655. Draw-in screws see cat.-no. 1656 and 1659. Draw-in screw wrenches see cat.-no. 1657. 1649 Taper d A D l 1649 ST mm mm mm mm 30 16 34,6 3 17 30 30 34,6 40 19 303 30 7 34,6 48 1 304 40 16 51,6 3 17 307 40 51,6 40 19 308 40 7 51,6 48 1 309 40 3 51,6 58 4 310 Taper d A D l 1649 ST mm mm mm mm 40 40 51,6 70 7 311 50 16 55, 3 17 40 50 55, 40 19 403 50 7 55, 48 1 404 50 3 55, 58 4 405 50 40 55, 70 7 406 1653 Arbors for Shell end Milling Cutters Precision version, surface ground contact surface (accuracy < 0,003 mm). Incl. of feather key and draw-in screws. With feather key for milling cutter with longitudinal keyway e.g. DIN 841. Draw-in screws see cat.-no. 1656 and 1659. Draw-in screw wrenches see cat.-no. 1657. Milling cutter arbor collars see cat.-no. 1665-1667. 1653 305 Taper d l 3 d 1 l l 5 1653 ST mm mm mm mm mm 40 36,6 36 5 40 306 40 7 36,6 43 5 60 307 40 3 36,6 48 5 60 308 50 40, 36 5 40 403 50 7 40, 43 5 60 404 50 3 40, 48 5 60 405 50 40 40, 56 5 60 406 1.30 www.hhw.de

1670 Milling Head Mounts Precision version with enlarged and surface ground contact surface. Short overhang for increased stability. Incl. of draw-in screws. For Shell End Milling Cutters and Milling Cutters with Transverse Keyway. d = 40 mm additionally with 4 threaded holes for direct mounting. Draw-in screws see cat.-no. 1656 and 1659. Draw-in screw wrenches see cat.-no. 1657. Taper d A D l 1670 ST mm mm mm mm 40 30 48 19 305 40 7 30 58 1 306 40 3 30 78 4 307 40 40 30 88 7 308 50 7 35 58 1 403 50 3 40 78 4 404 50 40 33 88 7 405 1690 ABS -Basic Mount ; Shape B, with sealing disc and modification set for shape AD. For Komet reversible cutting insert solid drilling tools. Clamping tools 1670 1690 Taper ABS d L L 1 Weight 1690 ST mm mm mm approx. kg 40 40 50 38 1,04 101 40 50 50 38 1,15 10 40 63 70 58 1,81 103 www.atorn.com Performance requires quality. Adjustable wrenches by ATORN: ATORN s high-quality hand tools. www.hhw.de 1.31

Drill chuck Quick-Change Chucks Chuck Collets Tapping Chucks Tapping Attachments. Tool Adapters in Compliance with DIN 8 Morse taper shank MT 3 - MT 5 DIN 8 parts 1 shape A with drive tang DIN 07. MK l1 d1 G a d d3 l l3 l4 l5 SW A mm mm mm mm mm mm mm mm mm degrees/minutes/seconds 3 86 3,85 M 1 5,0 19,0 36 5,5 4 1 18 4 1/6/16 4 109 31,67 M 16 6,5 5,0 43 8, 3 15 3 3 1/9/15 5 136 44,399 M 0 6,5 35,7 60 10,0 40 18 8 45 1/30/6 1180 / Drill chuck with integrated MT shank. Keyless clamping, automatic tightening, high true-running accuracy. Optimal stability thanks to a compact design. High-Performance Three-Jaw Drill Chucks SBF-plus Only for clockwise operation. 1180 Clamping width Clamping shank D L 1 1180 mm mm mm 1-13 MT 50 85,0 101 1-13 MT 3 50 85,0 10 1-13 MT 4 50 86,5 103 1-13 Ø 16 50 79,0 104 3-16 MT 3 56 89,0 105 3-16 MT 4 56 90,0 106 131 * Precise quick-change mount. For boring mills and drills. Quick-Change Chucks 131 Quick-change sleeves see cat.-no. 133 and 135. Size Shank for boreholes L1 L D for chuck collet Ø 131 MT in steel Ø mm mm mm mm mm 3 3 176 8 61 34 104 3 4 50 104 86 46 105 4 5 60 8 133 107 60 106 133 * For quick-change mounts cat.-no. 131. For mounting tools with morse taper shank and drive tang in compliance with DIN 8 B and adapter sleeves in compliance with DIN 639 cat.-no. 711 (for tools with straight shank). Morse Taper Chuck Collets for chuck for tools D sleeve Ø L1 L D1 133 size with MT mm mm mm mm 1 34 65 46 105 34 65 6 46 106 3 34 65 43 46 107 3 1 46 8 3 58 108 3 46 8 3 58 109 3 3 46 8 7 58 110 133 for chuck for tools D sleeve Ø L1 L D1 133 size with MT mm mm mm mm 3 4 46 8 53 58 111 4 60 105 6 74 11 4 3 60 105 6 74 113 4 4 60 105 9 74 114 4 5 60 105 68 74 115 1.3 www.hhw.de

135 Tap Collets * For mounting quick-change sleeves without friction clutch (cat.-no. 1459) or with adjustable safety friction clutch (cat.-no. 1460). With Length compensation in response to compression and tension (D/Z). For quick-change mounts cat.-no. 131. For clamping taps with square drive. Clamping tools for chuck Cutting range D/Z L1 L D1 D Inserts 135 size mm mm mm mm mm size M 3 - M 1 7,5 65 45 36 34 1 101 M 6 - M 0 1,5 65 69 53 34 10 3 M 3 - M 1 7,5 8 45 36 46 1 103 3 M 6 - M 0 1,5 8 69 53 46 104 4 M 6 - M 0 1,5 105 69 53 60 106 4 M 14 - M 33 0,0 105 10 78 60 3 107 135 1406 Tapping Chucks O Double chuck, clamps shank and square-end. Adjustable safety friction clutch to prevent tool breakage. Pendulum action to compensate for misalignments between machine and tool. Elastic length compensation in response to compression and tension. Incl. of wrench. For cutting internal threads with reversible drills, lathes, and milling machines. Can be mounted horizontally or vertically. 1406 Shank Ø d K Metric Whitworth Whitworth Pendulum Length compensation d 1 d l l 1 1406 MT mm mm thread thread pipe thread action mm compr./tension mm mm mm mm mm,5-10 0,0-8 M 3-1 1/8-1/ inch G 1/8 inch 1,0 10/0 53 58 135 18-0 101 3,5-10 0,0-8 M 3-1 1/8-1/ inch G 1/8 inch 1,0 10/0 53 58 135 18-0 10 3 6,0-16 4,7-1 M 8-0 1/4-13/16 inch G 1/8-1/ inch 1,5 10/0 76 83 170 3-8 103 4 6,0-16 4,7-1 M 8-0 1/4-13/16 inch G 1/8-1/ inch 1,5 10/0 76 83 171 3-8 104 4 11,0-3 0,0-18 M 14-30 9/16-1.1/8 inch G 1/4-7/8 inch,0 10/30 100 106 30 5-34 105 1408 Tapping Attachments * With infinitely adjustable clamping jaws. Built-in retraction :1. Adjustable safety friction clutch to prevent tool breakage. Rotation change immediately after an exchange of feed direction. For cutting internal threads with right-turning table and column drilling machines. 1408 Shank Cutting range Clamping range Rotational speed D L 1408 MT shank mm max. rpm mm mm M 3 - M 10,5-10,0 600 69 158 10 3 M 6 - M 16 4,5-1,5 400 8 183 104 3 M 14 - M 7 11,0 -,4 50 105 44 105 1410 Tapping Attachments O With morse taper shank in compliance with DIN 8 B with length compensation in response to tension. For thread cutting with hand drills and manual feed and without spindle reservation. Maintenance-free and for right- and left-hand threads. Quick-change sleeves see cat.-no. 1459-1460. Tapping heads with further shanks available on request. 1) Self feed ) Torque support 1410 Size for n max. B L L 1 D D 1 D 1410 taps rpm mm mm mm mm mm mm 1 TA 1/MT M 3 - M 1 100 6 140 60 80 3 19 10 1 TA 1/MT 3 M 3 - M 1 100 6 140 60 80 3 19 103 TA 0/MT 3 M 8 - M 0 500 8 170 86 100 50 31 104 www.hhw.de 1.33

Collet chucks Combination milling cutter arbors Shrinking chucks 1541 OZ Collet Chucks Morse taper shank with internal draw-in thread. With clamping nut. Collets see cat.-no. 155-1554. 1541 Taper MT / Clamping range for collets l d 1 1541 draw-in thread mm mm mm / M 10-16 415 E 6 43 100 3 / M 1-5 46 E 70 60 101 4 / M 16-5 46 E 70 60 10 5 / M 0-5 46 E 65 60 104 1648 Combination Milling Cutter Arbors Morse taper shank with internal draw-in thread. With feather key for milling cutters with longitudinal keyway e.g. DIN 841 and driving ring for milling cutters with transverse slot DIN 1880 and milling heads DIN 1830. 1648 Taper d A l 1648 MT mm mm mm 3 16 48 17 101 3 48 19 10 3 7 48 1 103 4 55 19 106 4 7 55 1 107. Toolholders in Compliance with DIN 69893 Alloyed case-hardened steel, min. tensile strength 950 N/mm. Taper tolerance less than AT3 in compliance with DIN 7187 and DIN 080. Hardness and depth match the respective mount. In order to avoid breakage or cracks, the thin-walled HSK chucks are not full-hardened. The different shapes of the hollow shaft taper DIN 69893: Hollow shaft taper HSK for automatice tool exchange with gripper groove. Shape A Shape B For machining centres with automatic tool changing. Central coolant supply through coolant tube. For machining centres and turning machines with automatic tool changing. Enlarged contact. Coolant through flange or central with coolant tube. Hollow shaft taper HSK for manual tool changing without gripper groove. Shape C Shape D Preferred type in transfer lines and special machines with manual tool exchange. Central coolant supply. For applications requiring good support through face rest. Manual tool exchange. Enlarged contact. Coolant through flange or central with coolant tube. Hollow shaft taper HSK for high rotational speed applications during high speed machining (HSC) with gripper groove. Shape E Shape F Prefered for high-speed machining. Symmetric without driver slots. Central coolant supply possible through coolant tube. Enlarged contact. Central coolant supply possible through coolant tube. 1.34 www.hhw.de

1597 Shrinking Chucks Highest true-running accuracy and taper tolerance. Special heat treatment. Coated for stainlessness. Patented nominal-size increase allows for an automatic shrinking and facilitated handling. Suitable for clamping carbide, HSS, and steel shanks with a tolerance of h6. HSK d1 d d3 l1 l A V g 1597 mm mm mm mm mm mm mm 63 3 15 0 0 30 90 5 M 6 101 63 4 15 0 0 30 90 5 M 6 10 63 5 15 0 5 30 90 5 M 6 103 63 6 1 7 36 45 80 10 M 5 104 63 8 1 7 36 45 80 10 M 6 105 63 10 4 3 4 50 85 10 M 8 x 1 106 63 1 4 3 47 50 90 10 M 10 x 1 107 63 14 7 34 47 50 90 10 M 10 x 1 108 63 16 7 34 50 50 95 10 M 1 x 1 109 63 18 33 4 50 57 95 10 M 1 x 1 110 63 0 33 4 5 57 100 10 M 16 x 1 111 63 5 44 53 58 57 115 10 M 16 x 1 11 63 3 44 53 6 57 10 10 M 16 x 1 113 63 L 6 1 7 36 45 10 10 M 5 01 63 L 8 1 7 36 45 10 10 M 6 0 63 L 10 4 3 4 50 10 10 M 8 x 1 03 63 L 1 4 3 47 50 10 10 M 10 x 1 04 63 L 14 7 34 47 50 10 10 M 10 x 1 05 63 L 16 7 34 50 50 10 10 M 1 x 1 06 63 L 18 33 4 50 57 10 10 M 1 x 1 07 63 L 0 33 4 5 57 10 10 M 16 x 1 08 63 XL 6 1 3 36 45 160 10 M 5 301 63 XL 8 1 3 36 45 160 10 M 6 30 63 XL 10 4 34 4 50 160 10 M 8 x 1 303 63 XL 1 4 34 47 50 160 10 M 10 x 1 304 63 XL 14 7 4 47 50 160 10 M 10 x 1 305 63 XL 16 7 4 50 50 160 10 M 1 x 1 306 63 XL 18 33 51 50 57 160 10 M 1 x 1 307 63 XL 0 33 51 5 57 160 10 M 16 x 1 308 63 XL 5 44 53 58 57 160 10 M 16 x 1 309 63 XL 3 44 53 6 57 160 10 M 16 x 1 310 slim HSK d1 d d3 l1 NL A V g 1597... mm mm mm mm mm mm mm 63 3 9 13 0 40 70 5 M 6 501 63 4 10 14 0 40 70 5 M 6 50 63 6 1 18 36 60 90 5 M 5 503 63 8 14 0 36 60 90 5 M 6 504 63 10 16 4 60 90 5 M 8 x 1 505 63 1 18 4 47 60 90 5 M 10 x 1 506 63 16 8 50 60 90 5 M 1 x 1 507 63 0 7 34 5 70 100 5 M 1 x 1 508 63 5 34 41,5 58 75 105 5 M 16 x 1 509 63 L 3 9 16 0 70 100 5 M 6 510 63 L 4 10 17 0 70 100 5 M 6 511 63 L 6 1 1 36 90 10 5 M 5 51 63 L 8 14 3 36 90 10 5 M 6 513 63 L 10 16 5 4 90 10 5 M 8 x 1 514 63 L 1 18 7 47 90 10 5 M 10 x 1 515 63 L 16 31 50 90 10 5 M 1 x 1 516 63 L 0 7 37 5 100 130 5 M 16 x 1 517 63 L 5 34 44 58 100 130 5 M 16 x 1 518 63 XL 3 9 19 0 100 130 5 M 6 519 63 XL 4 10 0 0 100 130 5 M 6 50 63 XL 6 1 4 36 10 150 5 M 5 51 63 XL 8 14 6 36 10 150 5 M 6 5 63 XL 10 16 8 4 10 150 5 M 8 x 1 53 63 XL 1 18 30 47 10 150 5 M 10 x 1 54 63 XL 16 34 50 10 150 5 M 1 x 1 55 63 XXL 6 1 7 36 150 180 5 M 5 56 63 XXL 8 14 9 36 150 180 5 M 6 57 63 XXL 10 16 31 4 150 180 5 M 8 x 1 58 63 XXL 1 18 33 47 150 180 5 M 10 x 1 59 63 XXL 16 37 50 150 180 5 M 1 x 1 530 63 XXL 0 7 4 5 150 180 5 M 16 x 1 531 63 XXL 5 34 47 58 150 180 5 M 16 x 1 53 1597 501-53 Slim. patented nominal-size Clamping tools HSC HPC 1597 101-310 1597 501-53 Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. Shrinking machines see cat.-no. 1584-1595. www.hhw.de 1.35

Shrinking chucks Short chucks Quick-change tapping chucks 1599 Shrinking Chucks HSC HPC Highest true-running accuracy and taper tolerance, manufactured in climatised environment. Advantages: high chucking forces and long service life thanks to the usage of high-quality hot working steel and special heat treatment. Coated for stainlessness. Patented nominal-size increase allows for an automatic shrinking and facilitated handling. Suitable for clamping carbide, HSS, and steel shanks with a tolerance of h6. Shrinking machines see cat.-no. 1584-1595. 1599 01-3 Slim. patented nominal-size HSK d1 d d3 l1 A V g 1599... mm mm mm mm mm mm 40 3 15 0 0 60 5 M 6 101 40 4 15 0 0 60 5 M 6 10 40 5 15 0 5 60 5 M 6 103 40 6 1 7 36 65 104 40 8 1 7 36 65 105 40 10 4 30 4 65 106 40 1 4 30 47 65 107 40 14 7 34 47 65 108 40 16 7 34 50 65 109 40 L 3 15 0 0 80 5 M 6 110 40 L 4 15 0 0 80 5 M 6 111 40 L 5 15 0 5 80 5 M 6 11 40 L 6 1 7 36 80 10 M 5 113 40 L 8 1 7 36 80 10 M 6 114 40 L 10 4 3 4 80 10 M 8 x 1 115 40 L 1 4 3 47 90 10 M 10 x 1 116 40 L 14 7 34 47 90 10 M 10 x 1 118 40 L 16 7 34 50 90 10 M 1 x 1 119 40 XL 3 15 0 0 10 5 M 6 10 40 XL 4 15 0 0 10 5 M 6 11 40 XL 5 15 0 5 10 5 M 6 1 40 XL 6 1 7 36 10 10 M 5 13 40 XL 8 1 7 36 10 10 M 6 14 40 XL 10 4 3 4 10 10 M 8 x 1 15 40 XL 1 4 3 47 10 10 M 10 x 1 16 40 XL 14 7 34 47 10 10 M 10 x 1 17 40 XL 16 7 34 44 10 10 M 1 x 1 18 1599 101-18 slim HSK d1 d d3 l1 NL A V g 1599... mm mm mm mm mm mm mm 40 3 9 1 0 4 50 5 M 6 01 40 4 10 13 0 4 50 5 M 6 0 40 6 1 15 34 4 50 03 40 6 1 16 36 38 60 04 40 8 14 18 36 38 60 05 40 10 16 0 4 38 60 06 40 1 18 4 38 60 07 40 L 3 9 13 0 40 64 5 M 6 08 40 L 4 10 14 0 40 64 5 M 6 09 40 L 6 1 18 36 60 84 5 M 5 10 40 L 8 14 0 36 60 84 5 M 6 11 40 L 10 16 4 60 84 5 M 8 x 1 1 40 L 1 18 4 47 60 84 5 M 10 x 1 13 40 XL 3 9 16 0 70 94 5 M 6 14 40 XL 4 10 17 0 70 94 5 M 6 15 40 XL 6 1 1 36 90 114 5 M 5 16 40 XL 8 14 3 36 90 114 5 M 6 17 40 XL 10 16 5 4 90 114 5 M 8 x 1 18 40 XL 1 18 7 47 90 114 5 M 10 x 1 19 40 XXL 6 1 4 36 10 144 5 M 5 0 40 XXL 8 14 6 36 10 144 5 M 6 1 40 XXL 10 16 8 4 10 144 5 M 8 x 1 40 XXL 1 18 30 47 10 144 5 M 10 x 1 3 1599 01-3 1.36 www.hhw.de

185 Short Chucks Very high precision, working surfaces hardened and ground. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Clamping tools 185 HSK Clamping range L D 185... mm mm mm 63 1,5-16 110 50 103 189 0 Short type, wear parts hardened and ground, clamping range 1-16 mm. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Short Chucks 1-16 mm Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. 189 HSK Clamping range A D 189... mm mm mm 63 1-16 100 50 01 1835 Short Chucks 0 Short type, wear parts hardened and ground, high true-running accuracy. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. 1835 HSK Clamping range D L L 1 max. weight 1835... mm mm mm mm kg 63 0,5-13 50 104 110 1,7 101 63,5-16 57 109 115 1,9 10 1838 WFLC. Precision version with length compensation in response to compression and tension. Quick-change Tapping Chucks Quick-change sleeves see cat.-no. 1459-1463. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. 1838 HSK for taps Suitable Length compensation L D Ø D Ø 1838 drill inserts/size compr./tension mm mm mm mm 63 M 3 - M 1 1 7,5/7,5 7 41 19 101 63 M 6 - M 0 10/10 110 60 31 10 www.hhw.de 1.37

Expansion chucks Arbors Collet chucks 1840 Hydro expansion Chucks short, slim HSC 0 High true-running accuracy and torque transmission. Low maintenance thanks to enclosed clamping system. Material 1600-1800 N/mm tensile strength, hardened (5+ HRC). Max. coolant pressure 80 bar, axial length adjustment 10 mm. Advantages: anti-vibration clamping, increase of tool life, reduction of micro breaks of the tool cutting edge, easy handling, high positioning and repetition accuracy, flexible thanks to the usage of reduction sleeves. Incl. of hexagon T-handle wrench. For drilling, reaming, and milling. Also suitable for clamping of Weldon and Whistle- Notch shanks. Reduction sleeves see cat.-no. 1581. Cylinder cleaner see cat.-no. 956. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. 1840 HSK d1 d d3 l1 l l3 l4 g 1840 mm mm mm mm mm mm mm 63 6 6 50 70 37 10 4 M 5 094 63 8 8 50 70 37 10 4 M 6 095 63 10 30 50 80 41 10 3 M 8 x 1 096 63 1 3 50 85 46 10 40 M 10 x 1 097 63 14 34 50 85 46 10 40 M 10 x 1 098 63 16 38 50 90 49 10 46 M 1 x 1 099 63 18 40 50 90 49 10 46 M 1 x 1 100 63 0 4 50 90 51 10 48 M 16 x 1 101 63 5 57 53 10 57 10 63 M 16 x 1 10 63 3 63 53 15 61 10 61 M 16 x 1 103 1841 Arbors for Milling Cutters with Draw-in thread HSC Precision version. External taper and fit ground. For mounting screw-in milling cutters with thread. 1841 110 Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. 1841 111 HSK d 1 d D A L M 1841... mm mm mm mm mm 63 6,5 10 13 51 5 6 101 63 8,5 13 15 51 5 8 10 63 L 8,5 13 3 76 50 8 103 63 XL 8,5 13 3 101 75 8 104 63 10,5 18 0 51 5 10 105 63 L 10,5 18 3 76 50 10 106 63 XL 10,5 18 3 16 100 10 107 63 XXL 10,5 18 36,5 176 150 10 108 63 1,5 1 4 51 5 1 109 63 L 1,5 1 4 76 50 1 110 63 XL 1,5 1 31 101 75 1 111 63 XXL 1,5 1 33 16 100 1 11 63 XXXL 1,5 1 40 176 150 1 113 63 17 9 9 51 5 16 114 63 L 17 9 34 76 50 16 115 63 XL 17 9 34 101 75 16 116 63 XXL 17 9 36 16 100 16 117 63 XXXL 17 9 4,5 176 150 16 118 1841 113 www.atorn.com Performance requires quality. ATORN s taps: ATORN s high-quality drilling tools. 1.38 www.hhw.de

1843 0 Precision version. High true-running accuracy. For clamping tools with straight shank in collets DIN 6499-shape A and B. ER Collet Chucks Collet sets see cat.-no. 1519. Collets see cat.-no. 150-155 and 1534-1539. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. Clamping tools 1843 301 HSK - ER Clamping range A D Ø 1843 mm mm mm 63-16 1-10 100 3 301 63 L - 16 1-10 160 3 30 63-5 - 16 100 4 303 63 L - 5-16 160 4 304 63-3 - 0 100 50 305 63 L - 3-0 160 50 306 63-40 3-6 10 63 307 63 L - 40 3-6 160 63 308 1845 ER Collet Chucks slim HSC Clamping nut fine balanced for HSC, ER11 throughhole core-drilled, after the hardening, the shank was turned once more. With Balluf-Chip borehole. For clamping tools with straight shank in collets DIN 6499-shape A and B. Collet sets see cat.-no. 1519. Collets see cat.-no. 150-155 and 1534-1539. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. HSK - ER Clamping range A D Ø 1845... mm mm mm 63 L - 11 1-7 100 16 101 63 XL - 11 1-7 160 16 10 63 L - 16 1-10 100 103 63 XL - 16 1-10 160 104 63 L - 5 1-16 100 35 105 63 XL - 5 1-16 160 35 106 1844 Collet Chucks Centro P Mini HSC HPC * Extremely slim design, external and internal taper ground. Concentricity and repeatability 0,003 mm (with GER-HP collets). Concentricity and repeatability 0,006 mm (with GER collets). Clamping nut not included. For high-precision clamping of tools with straight shank, without concentricity and clamping force loss, up to shank tolerance h10. Collets with square drive are not suitable for taps. Clamping nuts and wrench see cat.-no. 1509. GER-HP collets see cat.-no. 1546. GER collets see cat.-no. 1534. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. HSK Size Clamping range Collets Dimension D Dimension A Insertion depth E 1844... mm mm mm mm 63 CP 11 M 1-7 ER 11/4008 E 16 100 68 101 63 CP 11 M 1-7 ER 11/4008 E 16 160 68 10 1845 1844 www.atorn.com Performance requires quality. Roughing end milling cutter by ATORN: ATORN s high-quality milling tools. www.hhw.de 1.39

Collet chucks Taper sleeves Milling cutter mounts 186 Collet Chucks Centro P * External and internal taper ground. Concentricity and repeatability 0,003 mm (with GER-HP collets). Concentricity and repeatability 0,006 mm (with GER collets). Clamping nut not included. For high-precision clamping of tools with straight shank, without concentricity and clamping force loss, up to shank tolerance h10. Collets with square drive are not suitable for taps. Clamping nuts and wrench see cat.-no. 1509. Sealing disc see cat.-no. 1513. GER-HP collets see cat.-no. 1546-1551. GER collets see cat.-no. 1534-1539. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. HSC HPC 186 HSK Size Clamping range Collets Dimension D Dimension A Insertion depth E* Insertion depth F** 186... mm mm mm mm mm 63 CP 16 1-10 ER 16/46 E 30 100 71 101 63 CP 16 1-10 ER 16/46 E 30 160 106 10 63 CP 5-16 ER 5/430 E 40 100 70 104 63 CP 5-16 ER 5/430 E 40 160 18 105 63 CP 3-0 ER 3/470 E 50 70 46 107 63 CP 3-0 ER 3/470 E 50 100 71 45 108 63 CP 3-0 ER 3/470 E 50 160 19 55 109 * Dimension E for tool shanks less than 16 mm ** Dimension F for tool shanks bigger than 16 mm 1846 Taper Sleeves Precision version. For mounting tools with MT shank and drive tang. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. 1846 HSK MT A D Ø 1846 mm mm 63 1 100 5 101 63 10 3 10 63 3 140 40 103 63 4 160 48 104 1848 HG Collet Chucks Haimer High-precision chuck, reliable clamping, high truerunning accuracy. Incl. of draw-in screws and extraction hook. Very suitable for high-speed machining. For clamping tools with straight shank. HG collets see cat.-no. 167. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. HSC 1848 HSK Size A Ø D for clamping Ø 1848 mm mm mm 63 1 10 30 / 3 / 4 / 5 / 6 / 8 01 63 10 35 10 / 1 / 14 0 63 3 10 48 16 / 18 / 0 03 www.atorn.com Performance requires quality. Burrs by ATORN: ATORN s high-quality grinding and cutting tools. 1.40 www.hhw.de

1849 0 Precision version, borehole tolerance < 0,004 mm. Fine balancing G,5-5.000 rpm, stainless coating. With Balluf-Chip borehole. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Milling Cutter Mounts Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. Spare screw see cat.-no. 1635. Clamping tools 1849 31 HSK d D A 1849 mm mm mm 63 6 5 65 301 63 L 6 5 100 30 63 XL 6 5 160 303 63 8 8 65 304 63 L 8 8 100 305 63 XL 8 8 160 306 63 10 35 65 307 63 L 10 35 100 308 63 XL 10 35 160 309 63 1 4 80 310 63 XL 1 4 160 311 63 14 44 80 31 63 XL 14 44 160 313 63 16 48 80 314 63 XL 16 48 160 315 63 18 50 80 316 63 XL 18 50 160 317 63 0 5 80 318 63 XL 0 5 160 319 63 5 63 110 30 63 3 7 110 3 63 40 80 15 34 1850 Extended, slim version, borehole tolerance < 0,004 mm, after the hardening, the shank was turned once more for smoother operation. With ball joint clamping screw for Weldon and Whistle-Notch. By default with Balluf-Chip borehole. With through-hole stop screw. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Milling Cutter Mounts slim Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. Spare screw see cat.-no. 1635. 1850 HSK D1 A D D3 D4 1850 mm mm mm mm mm 63 L 6 100 13 18 8 101 63 XL 6 160 13 18 33 10 63 L 8 100 15 0 30 103 63 XL 8 160 15 0 36 104 63 L 10 100 16 1 3 105 63 XL 10 160 16 1 39 106 63 L 1 10 17 34 107 63 XL 1 160 17 4 108 63 L 14 10 19 4 36 109 63 XL 14 160 19 4 44 110 63 L 16 10 1 6 38 111 63 XL 16 160 1 6 46 11 63 L 18 10 3 8 40 113 63 XL 18 160 3 8 48 114 63 L 0 10 5 30 4 115 63 XL 0 160 5 30 50 116 www.hhw.de 1.41

Combination milling cutter arbors Milling head mounts Basic mount Coolant tube Draw-in bolts 1855 0 Precision version, surface ground contact surface (accuracy < 0,003 mm). Fine balancing G,5-5.000 rpm, stainless coating. With Balluf-Chip borehole. Incl. of feather key, driving ring and draw-in screw. With feather key for milling cutters with longitudinal Combination Milling Cutter Arbors keyway e.g. DIN 841 and driving ring for milling cutters with transverse slot DIN 1880 and milling heads DIN 1830. Driving rings see cat.-no. 1655. Draw-in screws see cat.-no. 1656 and 1659. Draw-in screw wrenches see cat.-no. 1657. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. 1855 06 HSK d D A l 1855 mm mm mm mm 63 16 3 60 17 01 63 L 16 3 100 17 0 63 40 60 19 03 63 L 40 100 19 04 63 7 48 60 1 05 HSK d D A l 1855 mm mm mm mm 63 L 7 48 100 1 06 63 3 58 60 4 07 63 L 3 58 100 4 08 63 40 70 70 7 09 63 L 40 70 100 7 10 1858 Milling Head Mounts 0 Precision version with enlarged and surface ground contact surface. Short overhang for increased stability. Fine balancing G,5-5.000 rpm, stainless coating. With Balluf-Chip borehole. Incl. of draw-in screws. For Shell End Milling Cutters and Milling Cutters with Transverse Keyway. Draw-in screws see cat.-no. 1656 u. 1659. Draw-in screw wrenches see cat.-no. 1657. Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. 1858 05 HSK D1 A D l1 1858 mm mm mm mm 63 16 50 38 17 01 63 L 16 100 38 17 0 63 60 48 19 03 63 L 100 48 19 04 63 7 60 58 1 05 HSK D1 A D l1 1858 mm mm mm mm 63 L 7 100 58 1 06 63 3 60 78 4 07 63 L 3 100 78 4 08 63 40 60 88 7 09 1696 ; For Komet reversible cutting insert solid drilling tools. ABS -Basic Mount Coolant tube see cat.-no. 1864. Wrench for coolant tube see cat.-no. 1865. 1696 HSK ABS d 1 L L 1 Weight 1696... mm mm mm approx. kg 63 40 60 34 1,00 101 63 50 70 44 1, 10 63 63 80 1,64 103 1864 For optimising the central coolant feed of hollow shaft tapers in compliance with DIN 69893-HSK-A. 1865 For coolant tube cat.-no. 1864. Coolant Tube HSK D d L 1864... mm mm 63 M18 x 1 1 34,5 104 Wrench for Coolant Tube HSK D L 1865... mm mm 63 16,5 136 104 1864 1865 1.4 www.hhw.de

. Multi Spindle Heads for Drilling, Thread Cutting, Countersinking, Reaming, Milling, Turning etc. Clamping tools Multi spindle heads with fixed drilling picture for machining centres with or without automatic tool exchange, for using solid carbide tools with a rotational speed of up to 1.000 rpm. With or without coolant feed. SMSK 6/15 with 6 spindles and a maximum drilling capacity of 15 mm per spindle. Spindle head in compliance with DIN 55058 for adjustable sleeves size 0. Special holder with collet mount for high rotational speed applications when using solid carbide drills and/or solid carbide tools. Multi spindle head mount ST 50 with gripper lock for machining centres. SMSK /15 ST-taper 40, with continuous coolant-feed, tapping chuck with Length compensation in response to compression and tension. SMSK 4/15 with 4 spindles and a max. drilling capacity of 15 mm per spindle and/or tapping capacity of M 1, spindle head in compliance with DIN 55058 for adjustable sleeves size 0. Quickchange tapping chucks with pressure and tension compensation and spring bearing countersleeve for bevelling the borehole. Multi spindle head mount ST 50 with gripper lock for machining centres. Multi spindle head, single adjustable with, 3 or 4 spindles available, max. drilling capacity per each spindle, depending on type, from 3 mm up to 3 mm. KE for easy and quick adjustable handling. Very sturdy construction, large adjusting range, narrow spindle distances, low weight, high service life, also suitable for small series with medium tolerance range. Multi spindle heads with adjustable drilling picture by exhanging spindle mount plate, so called the matrix. Please contact us! Please include a detailed drawing with measures of the drilling pictures in order to insure a good information. KR with joint spindles of high true-running accuracy and good bearing stability at most narrow spindle distance. Easy reverse of drilling pictures and absolute true size of drilling picture thanks to spindle mount plates (matrixe) which are produced by using coordinate machining system, large adjusting range of single types up to 530 mm, max. drilling capacity up to 40 mm in steel. 1733-1734 Draw-in Bolts DIN 6987 0 1733 Shape A, with hole and O-ring. Gripping lip angle 15. 1734 Shape B without borehole, with O-ring. Gripping lip angle 15. 1733 1734 for d 1 d d 3 d 4 G l 1 l l 3 1733 1734 ST mm mm mm mm mm mm mm 40 19 14 3 17 M 16 54 6 0 101 101 50 8 1 36 5 M 4 74 34 5 10 10 1735 0 Gripping lip angle 45. Draw-in Bolts ISO 7388/ Shape B 1735 101-10 With hole and O-ring. 1735 01-0 Without borehole, with O-ring. 1735 101-10 1735 01-0 for d 1 d d 4 G l 1 l l 3 1735 1735 ST mm mm mm mm mm mm 40 18,95 1,95 17 M 16 44,5 16,4 11,15 101 01 50 9,10 19,6 5 M 4 65,5 5,55 17,95 10 0 www.hhw.de 1.43

Draw-in bolts Tapping Attachments Tapping Chucks Rubber-Collets 1736 Draw-in Bolts 0 With annular groove (Ott-clamping groove), gripping lip angle 15. 1736 301-30 Head made of solid stock. 1736 303-304 With internal thread. for d 1 d d 3 G l 1 l 1736 ST mm mm mm mm mm 40 5,0 1,1 17 M 16 53 5 301 50 39,6 3,0 5 M 4 65 5 30 40 5,0 1,1 17 M 16 53 5 303 50 39,6 3,0 5 M 4 65 5 304 1736 301-30 1736 303-304 1737-1739 0 1737 Gripping lip angle 45. Draw-in Bolts MAS 403-BT/JIS B 6339 1739 Gripping lip angle 90. 1738 Gripping lip angle 60 (also for OKUMA machining centres). 45 60 90 for d 1 d d 4 G l 1 l 1737 1738 1739 BT mm mm mm mm mm 40 15 10 17 M 16 60 35 40 40 40 50 3 17 5 M 4 85 45 403 403 403 1737 1738 1739 1740 0 Draw-in Bolts with buttress thread 1740 for G 1 G l 1 l 1740 ST mm mm 40 S 0 x M16 56 8 101 1431 Tapping Attachments d Adjustable safety friction clutch, length compensation in response to compression and tension, automatic quick-return action 1,75:1. With internal taper for exchangeable shanks. Incl. of stop. For tapping with machines with clockwise operation working spindle. Can be mounted horizontally or vertically. Chuck arbors see cat.-no. 1170. Rubber-Flex collets see Kat-Nr. 1447. d 1 1431 A h 1 h h 3 Mounting for Rotational speed Length compensation for rubber d 1 h 3 h 1 h 1431 taper thread max. A axial mm collets mm mm mm mm 30 X B 16 M 1,4 - M 7 000 3,5 J115/J116/J117 48 80 108 83 10 50 X B 16 M 3,0 - M 1 1500 6,0 J40/J41/J4//J43 70 105 153 1 103 70 X B 18 M 5,0 - M 18 100 9,0 J440/J441/J443/J445 76 113 164 139 104 1.44 www.hhw.de

1445 Tapping Chucks Clamping tools d Adjustable safety friction clutch, length compensation in response to compression and tension, automatic quick-return action 1,75:1. Straight shank mount with lateral clamping surface in compliance with DIN 1835 B/E. For tapping with machines with clockwise and counterclockwise operation working spindle. Can be mounted horizontally or vertically. 1445 Rubber-Flex collets see Kat-Nr. 1447. for straightshank Ø Length compensation Rubber A B D F J 1445 thread mm compr./tension mm collets mm mm mm mm mm SM - 00 M 1,4 - M 7 0 5,0/4,5 J115/116/117 7,0 19 53 6 50 101 SM4-00 M 3,0 - M 1 0 7,0/7,0 J40/J41/J4/J43 38,0 7 71 36 50 10 SM6-00 M 5,0 - M 18 0 11,0/11,0 J440/J441/J443/J445 47,5 37 96 56 50 103 1447 RUBBER-FLEX For tapping heads Tapmatic see Kat-Nr. 1431/1445. Rubber Collets Clamping range 1447 mm J 115 1,0 -,5 101 J 116,5-4,5 10 J 117 4,5-6,5 103 J 43,0-4,5 104 J 41 3,5-6,5 105 J 40 4,5-8,0 106 1447 Clamping range 1447 mm J 4 6,5-10,0 107 J 443,8-7,0 108 J 441 4,5-10,0 109 J 440 7,0-13,0 110 J 445 9,0-15,0 111 1449 O With Minimal length compensation. Save direct clamping with ER collets, straight shank mount with lateral clamping surface in compliance with DIN 1835 B/E. Advantage: chuck can be used from M 3,5 - M 30. For tapping with machines with Synchro spindle. Synchro Tapping Chuck Collets with inner square see cat.-no. 158. 1449 for Length compensation d d d 1 l l 1 Collet nut Ø 1449 Taps mm mm mm mm mm mm mm M 3,5 - M 30 +/- 0,08 4-0 50 5 84,5 53 ESX3-GB E 3 101 145 O WFLC/MS.Precision version with length compensation in response to compression and tension. Straight shank mount with lateral clamping surface in compliance with DIN 1835 B/E. Quick-Change Tapping Chucks 145 Quick-change sleeves see cat.-no. 1459-1463. for Suitable Length compensation D Ø D 1 Ø D Ø L L 1 145 Taps inserts/size compr./tension mm mm mm mm mm M 3 - M 1 1 7,5/7,5 39 5 19 45 53 101 M 6 - M 0 10,0/10,0 60 5 31 68 53 10 www.hhw.de 1.45

Quick-change sleeves Reduction Sleeves Clamping sleeves Extensions 1459 WE. Sleeves without safety friction clutch. For clockwise and counterclockwise operation. Quick-change Sleeves without Safety Friction Clutch for Shank Ø Shank T DIN DIN DIN DIN D 1459 Chuck size mm mm 35 371 374/376 5157 mm 1 3,5,7 M 3 M 3 M 5 19 115 1 4,0 3,0 M 3,5 M 3,5 19 116 1 4,5 3,4 M 4 M 4 M 6 19 118 1 6,0 4,9 M 5 - M 8 M 5 + M 6 M 8 19 11 1 7,0 5,5 M 10 M 10 G 1/8 19 13 1 8,0 6, M 8 19 14 1 9,0 7,0 M 1 M 1 19 15 1 10,0 8,0 M 10 19 16 6,0 4,9 M 5 - M 8 M 5 + M 6 M 8 31 19 7,0 5,5 M 10 M 10 31 130 8,0 6, M 8 31 131 9,0 7,0 M 1 M 1 31 13 10,0 8,0 M 10 31 133 11,0 9,0 M 14 M 14 G 1/4 31 135 1,0 9,0 M 16 M 16 G 3/8 31 137 14,0 11,0 M 18 M 18 31 138 16,0 1,0 M 0 M 0 G 1/ 31 140 3 11,0 9,0 M 14 M 14 48 141 3 1,0 9,0 M 16 M 16 48 14 3 14,0 11,0 M 18 M 18 48 143 3 16,0 1,0 M 0 M 0 48 144 3 18,0 14,5 M + M 4 M + M 4 G 5/8 48 146 3 0,0 16,0 M 7 + M 8 M 7 + M 8 G 3/4 48 148 3,0 18,0 M 30 M 30 G 7/8 48 150 3 5,0 0,0 M 33 M 33 G 1 48 15 1460 WES/B, sleeves with safety friction clutch. For right-hand thread. Quick-change Sleeves with Safety Friction Clutch Bits for left-hand thread available on request. 1459 1460 for Shank Ø Shank T DIN DIN DIN DIN D 1460 Chuck size mm mm 35 371 374/376 5157 mm 1 3,5,7 M 3 M 3 19 315 1 4,0 3,0 M 3,5 M 3,5 19 317 1 4,5 3,4 M 4 M 4 19 318 1 4,5 3,4 M 6 19 319 1 6,0 4,9 M 5 M 5 19 30 1 6,0 4,9 M 6 M 6 19 31 1 6,0 4,9 M 8 M 8 19 3 1 7,0 5,5 M 10 M 10 19 33 1 8,0 6, M 8 19 35 1 9,0 7,0 M 1 M 1 19 36 1 10,0 8,0 M 10 19 37 6,0 4,9 M 6 M 6 31 39 6,0 4,9 M 8 M 8 31 330 7,0 5,5 M 10 M 10 31 331 8,0 6, M 8 31 33 9,0 7,0 M 1 M 1 31 333 10,0 8,0 M 10 31 334 11,0 9,0 M 14 M 14 31 335 1,0 9,0 M 16 M 16 31 337 14,0 11,0 M 18 M 18 31 339 16,0 1,0 M 0 M 0 31 340 3 11,0 9,0 M 14 M 14 48 34 3 1,0 9,0 M 16 M 16 48 343 3 14,0 11,0 M 18 M 18 48 344 3 16,0 1,0 M 0 M 0 48 345 3 18,0 14,5 M M G 5/8 48 346 3 18,0 14,5 M 4 M 4 48 347 3 0,0 16,0 M 7 + 8 M 7 + 8 48 348 3,0 18,0 M 30 M 30 48 350 3 5,0 0,0 M 33 M 33 48 35 1.46 www.hhw.de

1463 Reduction Sleeves Clamping tools For reducing the chuck size of quick-change tapping chuck sleeves ( WE and WES). 1463 1) Chuck mount, ) Insert mount. Size for for mounting d 1 d d 3 l l 3 1463 chuck size sleeves size mm mm mm mm mm 1/0 1 0 30 19 13 6,0 4 101 /1 1 48 31 19 8,5 5 10 3/ 3 70 48 31 7,0 6 103 1641 Clamping sleeves for Taps For direct mounting of taps in milling cutter mounts (Weldon) without length compensation. D d 1 x T L 1641 mm mm mm 16 3,5 x,7 56 101 16 4,0 x 3,0 56 10 0 6,0 x 4,9 58 103 0 7,0 x 5,5 58 104 0 8,0 x 6, 58 105 0 9,0 x 7,0 58 106 Cost-efficient alternative for synchronised spindles. D d 1 x T L 1641 mm mm mm 0 10,0 x 8,0 58 107 5 11,0 x 9,0 66 108 5 1,0 x 9,0 66 109 3 14,0 x 11,0 70 110 3 16,0 x 1,0 70 111 3 18,0 x 14,5 70 11 1641 3110 Extension Pieces for Machine Taps Long and/or extra long version. The front end of the extension is designed to function as collet. When the knurled clamping nut is tightened, the collet clamps the tap.torque transmission by means of the square end. The back end of the extension is in compliance with DIN, so that the tap extensions can be mounted (like a tap) in quick-change sleeves or other tapping attachments. For tapping in hard-to-reach places e.g. high ledges, deep grooves, projecting edges on fixtures, extremely deep internal threads or right next to cast iron walls. 3110 Dimensions Taps Dimensions extension Nominal thread Ø d mm Shank Ø Square-end Clamping length Ø D3 K D4/D5 L L3 3110 DIN 371 DIN 374/376 d mm K1 mm l1 mm mm mm mm mm mm E1 M - M,6 M 4,8,1 6 4,9 6,1 60 130 101 E1 L M - M,6 M 4,8,1 6 4,9 6,1 70 30 10 E M 3 M 4,5 - M 5 3,5,7 3 6 4,9 7,5 60 130 103 E L M 3 M 4,5 - M 5 3,5,7 3 6 4,9 7,5 70 30 104 E3 M 4 M 6 4,5 3,4 3 6 4,9 8,4 60 130 105 E3 L M 4 M 6 4,5 3,4 3 6 4,9 8,4 70 30 106 E4 M 4,5 - M 6 M 8 6,0 4,9 6 7 5,5 1,1 60 130 107 E4 L M 4,5 - M 6 M 8 6,0 4,9 6 7 5,5 1,1 70 30 108 E5 M 7 M 9 - M 10 7,0 5,5 6 7 5,5 1,1 60 130 109 E5 L M 7 M 9 - M 10 7,0 5,5 6 7 5,5 1,1 70 30 110 E6 M 8 M 11 8,0 6, 30 8 6, 13,0 60 130 111 E6 L M 8 M 11 8,0 6, 30 8 6, 13,0 80 30 11 E7 M 9 M 1 9,0 7,0 31 9 7,0 15,0 60 130 113 E7 L M 9 M 1 9,0 7,0 31 9 7,0 15,0 80 30 114 E8 M 10 10,0 8,0 33 10 8,0 15,0 60 130 115 E8 L M 10 10,0 8,0 33 10 8,0 15,0 80 30 116 E9 M 14 11,0 9,0 36 11 9,0 18,0 90 130 117 E9 L M 14 11,0 9,0 36 11 9,0 18,0 90 30 118 E10 M 16 1,0 9,0 36 1 9,0 18,0 90 130 119 E10 L M 16 1,0 9,0 36 1 9,0 18,0 90 30 10 www.hhw.de 1.47

Collets-Sets Collets 1519 ER/GER Collet Sets Fully hardened and ground. 1519 10 The collapse is up to 1 mm smaller e.g. 9-8 mm, except for collets 1 mm and 1,5 mm (collapse only 0,5 mm). Box for collets made of plastics see AQURADO storage system cat.-no. 84134. 1519 100-105 Polished, true-running accuracy 0,015 mm, on wooden rail. For standard collet chucks or collet chucks Centro P. 1519 05 1519 01-06 * Superfinish, GER collets true-running accuracy 0,005 mm, in wooden box. For standard collet chucks. * D x L Set contents Clamping range increments ER collets GER collets 1519 mm mm mm ER 11/4008 E 11,5 x 18,0 13-part 1-7 0,5 x - 100 ER 16/46 E 17,0 x 7,5 10-part 1-10 1,0 x - 101 ER 0/48 E 1,0 x 31,5 1-part - 13 1,0 x - 105 ER 5/430 E 6,0 x 34,0 15-part - 16 1,0 x - 10 ER 3/470 E 33,0 x 40,0 18-part 3-0 1,0 x - 103 ER 40/47 E 41,0 x 46,0 3-part 4-6 1,0 x - 104 GER 11-B/4008 E 11,3 x 18,0 13-part 1-7 0,5 - x 01 GER 16-B/46 E 17,0 x 7,5 10-part 1-10 1,0 - x 0 GER 0-B/48 E 1,0 x 31,5 1-part - 13 1,0 - x 03 GER 5-B/430 E 6,0 x 34,0 15-part - 16 1,0 - x 04 GER 3-B/470 E 33,0 x 40,0 18-part 3-0 1,0 - x 05 GER 40-B/47 E 41,0 x 46,0 3-part 4-6 1,0 - x 06 www.atorn.com Performance requires quality. Short chucks by ATORN: ATORN s high-quality clamping tools. 1.48 www.hhw.de

Clamping tools 150-155 ER Collets Fully hardened and ground. Polished, true-running accuracy 0,015 mm. For standard collet chucks. The collapse is up to 1 mm smaller e.g. 9-8 mm, except for collets 1 mm and 1,5 mm (collapse only 0,5 mm). Box for collets made of plastics see AQURADO storage system cat.-no. 84134. 150 ER 11/4008 E D x L 11,5 x 18 mm. 151 ER 16/46 E D x L 17 x 7,5 mm. 15 ER 0/48 E D x L 1 x 31,5 mm. 153 ER 5/430 E D x L 6 x 34 mm. 150-155 154 ER 3/470 E D x L 33 x 40 mm. 155 ER 40/47 E D x L 41 x 46 mm. ER 11 ER 16 ER 0 ER 5 ER 3 ER 40 Borehole 150 151 15 153 154 155 mm 1,0 101 101 1,5 10 10,0 103 103 103 103,5 104 104 3,0 105 105 105 105 105 3,5 106 4,0 107 107 107 107 107 107 4,5 108 5,0 109 109 109 109 109 109 5,5 110 6,0 111 111 111 111 111 111 6,5 11 7,0 113 113 113 113 113 113 8,0 114 114 114 114 114 9,0 115 115 115 115 115 10,0 116 116 116 116 116 11,0 117 117 117 117 1,0 118 118 118 118 13,0 119 119 119 119 14,0 10 10 10 15,0 11 11 11 16,0 1 1 1 17,0 13 13 18,0 14 14 19,0 15 15 0,0 16 16 1,0 17,0 18 3,0 19 4,0 130 5,0 131 6,0 13 www.atorn.com Performance requires quality. Solid carbide high-performance twist drills by ATORN: ATORN s high-quality drilling tools. www.hhw.de 1.49

Collets Clamping nuts 1534-1539 GER Collets * Fully hardened and ground. Superfinish, true-running accuracy 0,005 mm. For standard collet chucks or collet chucks Centro P. The collapse is up to 1 mm smaller e.g. 9-8 mm, except for collets 1 mm and 1,5 mm (collapse only 0,5 mm). Box for collets made of plastics see AQURADO storage system cat.-no. 84134. 1534 1535 GER 11-B/4008 E GER 16-B/46 E D x L 11,3 x 18 mm. D x L 17 x 7,5 mm. 1536 1537 GER 0-B/48 E GER 5-B/430 E D x L 1 x 31,5 mm. D x L 6 x 34 mm. 1538 1539 GER 3-B/470 E GER 40-B/47 E D x L 33 x 40 mm. D x L 41 x 46 mm. 1534-1539 GER 11-B GER 16-B GER 0-B GER 5-B GER 3-B GER 40-B Size 1534 1535 1536 1537 1538 1539 mm 1,0 01 01 1,5 0 0,0 03 03 03 03,5 04 04 3,0 05 05 05 05 05 07 3,5 06 4,0 07 07 07 07 07 08 4,5 08 5,0 09 09 09 09 09 09 5,5 10 6,0 11 11 11 11 11 11 6,5 1 7,0 13 13 13 13 13 13 8,0 14 14 14 14 14 9,0 15 15 15 15 15 10,0 16 16 16 16 16 11,0 17 17 17 17 1,0 18 18 18 18 13,0 19 19 19 19 14,0 0 0 0 15,0 1 1 1 16,0 17,0 3 3 18,0 4 4 19,0 5 5 0,0 6 6 1,0 7,0 8 3,0 9 4,0 30 5,0 31 6,0 3 1546-1551 * Fully hardened and ground. Superfinish, true-running accuracy 0,003 mm. System concentricity and repetition accuracy 0,003 mm if used in conjunction with Centro P. For collet chucks Centro P. Sealing disc see cat.-no. 1513. Box for collets made of plastics see AQURADO storage system cat.-no. 84134. GER-HP Collets for Centro P 1546 GER 11-HP/4008 E D x L 11,3 x 18 mm. 1547 GER 16-HP/46 E D x L 17 x 7,5 mm. 1549 GER 5-HP/430 E D x L 6 x 34 mm. 1550 GER 3-HP/470 E D x L 33 x 40 mm. 1546-1551 1551 GER 40-HP/47 E D x L 41 x 46 mm. 1.50 www.hhw.de

Clamping tools GER 11-HP GER 16-HP GER 5-HP GER 3-HP GER 40-HP Borehole 1546 1547 1549 1550 1551 mm 1,0 01 01 1,5 0 0,0 03 03 03,5 04 04 3,0 05 05 05 05 07 3,5 06 4,0 07 07 07 07 4,5 08 5,0 09 09 09 09 09 5,5 10 6,0 11 11 11 11 11 6,5 1 7,0 13 13 13 13 13 8,0 14 14 14 14 9,0 15 15 15 15 10,0 16 16 16 16 11,0 17 17 17 1,0 18 18 18 13,0 19 19 19 14,0 0 0 0 15,0 1 1 1 16,0 17,0 3 3 18,0 4 4 19,0 5 5 0,0 6 6 1,0 7,0 8 3,0 9 4,0 30 5,0 31 6,0 3 157-158 ER Collets for Tapping With square drive for driving the tap. Without length compensation. For clamping taps with collet chucks. Only for Synchro machines. Box for collets made of plastics see AQURADO storage system cat.-no. 84134. 158 ER 5/48 E ER 3/4537 E Shank Ø Square-end L 157 158 mm mm mm 3,5,7 18 01 4,5 3,4 18 0 0 5,5 4,3 18 03 03 6,0 4,9 18 04 04 7,0 5,5 18 05 05 8,0 6, 06 06 9,0 7,0 07 07 10,0 8,0 5 08 08 11,0 9,0 5 09 09 1,0 9,0 5 10 10 14,0 11,0 5 11 11 16,0 1,0 5 1 1 1517 Spare Clamping Nuts -Mini- For collet chucks type ER. 1517 Clamping range Outside Ø d Collet Thread 1517 mm mm 1-7 16 ER 11/4008 E M 13 x 0,75 101 1-10 ER 16/46 E M 19 x 1 10 1-13 8 ER 0/48 E M 4 x 1 103-16 35 ER 5/430 E M 30 X 1 104 www.hhw.de 1.51

Clamping nuts Wrench Collets 1530-1531 Spare Clamping Nut For collet chucks type ER. Open-end wrench for nut cat.-no. 1530 103 see cat.-no. 50113 35. 1530 Standard version. 1531 With ball bearing pressure ring, for increasing gripping force by approx. 50%. 1530-1531 1530 103 1530 1531 for clamping range for type Nut Ø 1530 1531 mm ER mm 1-10 16 Jaw opening 5/8 103 1-10 16 3 104 1-16 5 4 105 105-0 3 50 106 106 3-6 40 63 107 107 1516 Wrench ; ; ;; Special steel, galvanised, vertically ground. For cat.-no. 1515 + 1517. 1516 Clamping range Collets 1516 mm 1-7 ER 11/4008 E 101 1-10 ER 16/46 E 10 1-13 ER 0/48 E 103 153 Wrench Made of special steel hardened and galvanised, with suspension hole. For collet chucks type ER. 153 for clamping range for type for nut Ø Overall length 153 mm ER mm mm 1-10 16 3 160 103 1-16 5 4 03 104-0 3 50 53 105 3-6 40 63 85 106 155-1554 OZ Collets Spring steel, hardened throughout and ground. Through-hole in order to increase the clamping force. Advantages: improved concentricity, higher clamping force thanks to increased strength capacity, better system stiffness and tool life. Box for collets made of plastics see AQURADO storage system cat.-no. 84134. 155 415 E, for chuck size - 16 mm. D x L 5,5 x 40mm. 1553 46 E, for chuck size 3-5 mm. D x L 35,5 x 5mm. 1554 467 E, for chuck size 4-3 mm. D x L 44 x 60mm. 155-1554 415 E 46 E 467 E Borehole 155 1553 1554 mm 101 3 10 10 4 103 103 103 5 104 104 104 6 105 105 105 7 106 106 106 8 107 107 107 9 108 108 108 10 109 109 109 11 110 110 110 1 111 111 111 13 11 11 11 14 113 113 113 415 E 46 E 467 E Borehole 155 1553 1554 mm 15 114 114 114 16 115 115 115 17 116 116 18 117 117 19 118 118 0 119 119 10 10 4 11 11 5 1 1 6 13 8 14 30 15 3 16 1.5 www.hhw.de

156 OZ Clamping Nuts Clamping tools With ball-bearing mounted union nut. For collet chucks cat.-no. 1540-1545. Wrench see cat.-no. 50650 cont. for clamping range d5 d7 l11 156 mm mm mm - 16 M 33 x 1,5 43 4,0 101 3-5 M 48 x,0 60 30,0 10 4-3 M 60 x,5 7 33,5 103 156 1568 Push- Collet Set 173 E/F 48 40-part, hole diameters 3-4 mm, of 1 mm increments. 1568 Collet sets with 4-point or 6-point profiles available on request. for clamping range 1568 mm 3-4 101 1570-1571 Push- Collets Collets with 4-point or 6-point profiles available on request. 1570 1570 173 E, dimensions: Ø d 48 x Ø D 60 x L 94 mm, K = 30. DIN 6343/F48, triple slotted. ød K ød 1571 1571 185 E, dimensions: Ø d 66 x Ø D 84 x L110 mm, K = 30. DIN 6343/F66, quadruple slotted. L 173 E 185 E Borehole 1570 1571 mm 3 101 4 10 10 5 103 103 6 104 104 7 105 105 8 106 106 9 107 107 10 108 108 11 109 109 1 110 110 13 111 111 14 11 11 15 113 113 16 114 114 17 115 115 18 116 116 19 117 117 0 118 118 1 119 119 10 10 173 E 185 E Borehole 1570 1571 mm 3 11 11 4 1 1 5 13 13 6 14 14 7 15 15 8 16 16 9 17 17 30 18 18 31 19 19 3 130 130 33 131 131 34 13 13 35 133 133 36 134 134 37 135 135 38 136 136 39 137 137 40 138 138 41 139 139 4 140 140 173 E 185 E Borehole 1570 1571 mm 43 141 44 14 45 143 46 144 47 145 48 146 49 147 50 148 51 149 5 150 53 151 54 15 55 153 56 154 57 155 58 156 59 157 60 158 www.hhw.de 1.53

Inductive shrinking machine Fluid cooling unit Cooling adapter Length adjustment sleeve 1584-1586 Workshop-oriented multi-purpose shrinking machine. Multi-purpose gripper clamps all sizes, exchangeable induction coils thanks to simple plug-in connection. Shrinking with the Lowest Temperature Method (NTM) means that shrinking on and off are done with the lowest possible temperature. This guarantees safe machining, less deformation and structural changes for the mount, and longer service life. Advantages: Shrinking of mounts of other manufacturers is possible. Thanks to the horizontal design, the shrinking depth can be determined with greater facility and broken-off tools can be removed more easily. Shrinking machine with induction coil Standard 5 incl. of Kevlar protective gloves and positioning ring. Inductive Shrinking Machine E-Zwo For shrinking carbide tools from 3-3 mm and HSS tools from 6-3 mm. Cooling station FKS 03 see cat.-no. 1589. Induction coils see cat.-no. 1585. Shielding rings see cat.-no. 1586. Shrinking machine Height x Width x Depth Voltage Weight 1584... mm V kg E-Zwo 357 x 541 x 600 380 36 01 1585 301-306 Induction coils for inductive shrinking machine E-Zwo (cat.-no. 1584). 1586 301-307 Shielding rings for induction coils (cat.-no. 1585). Shielding of the magnetic field, protection of the chucks thanks to local heating. For lightning-quick and direct heating of the shank area. Induction coil for mounts for Shank Ø inside Ø 1585... mm mm Standard 5-3 - 3 49,0 301 Standard 3-6 - 3 64,0 30 Standard 10-3 - 1 36,0 303 Module MST, extra slim version - 36,0 304 Slim 3-7 MST 3-7 18,5 305 Slim 8-1 MST 8-1 44,0 306 1584 Shielding rings for type for shank Ø 1586... mm Standard 5 6-1 301 Standard 5 14-0 30 Standard 5 5 303 Standard 5 3 304 Standard 3 16-0 305 Standard 3 5 306 Standard 3 3 307 1588 Easy handling by means of push-buttons. The shrinking time is automatically adjusted in accordance with the diameter. For shrinking carbide shanks from 3-0 mm and HSS shanks from 6-0 mm. Cooling station FKS see cat.-no. 1589. Inductive Shrinking Machine ISG 00/ISG 0 1588 01 ISG 00 With cooling fan. Machine with fan, induction coil and 3 exchange discs. 1588 0 ISG 0 Without cooling fan. Machine with induction coil and 3 exchange discs. 1588 Height x Width x Depth max. shrinking height Rating Power Weight 1588 mm mm Volt / A KW kg ISG 00 640 x 310 x 390 50 400 / 16 8 5 01 ISG 0 640 x 310 x 390 350 400 / 16 8 5 0 1.54 www.hhw.de

. Inductive Shrinking Machine Clamping tools Other inductive shrinking machines in different versions, e.g. with higher output are available on request. Please send us your enquiry! ISG 300 WK 1589 Automatic adjustment of cooling and drying duration. Machine with 1 litre of concentrated coolant. For cooling, cleaning, and maintaining shrinking chucks. Suitable tool holders see cat.-no. 1589 0+03. for HSK 63/80/100 a tool holder is not necessary. Fluid Cooling System FKS 1589 0 Tool holder ST 30/40 for fluid cooling units FKS. 1589 03 tool holder ST 50 for fluid cooling units FKS. 1589 04 Coolant concentrate 1 litre. 1589 01 Height x Width x Depth Compressed-air connection Weight 1589 mm bar kg FKS 640 x 310 x 390 6,5 01 Tool holder ST 30/40 0 Tool holder ST 50 03 Coolant concentrate 1L 04 159-1593 159 Cooling adapter In order to minimise the cooling-down time, the cooling adapters are made of aluminium, they completely enclose the hot chucking area and are Cooling Adapter for Shrinking Machine equipped with cooling fins. The chuck's temperature has decreased enough after only 60 seconds that the chuck can be touched by hand. 1593 Toolholders Cooling adapter Toolholder Ø ST HSK-A 159 1593 mm 3-5 slim 101 3-5 10 6-9 103 9,1-1 104 1,1-16 105 16,1-106 40 103 50 104 63 108 1595 Length adjustment with 0,01 mm increments. Length adjustment sleeve for determining the overhang. Length Adjustment Sleeve Adjust the push rod to the desired length, insert the cutting tool into the borehole and clamp it against the plastic stop. Insert the tool into the warmed-up chuck. 159 1593 1595 for Ø Overhang 1595... mm mm 3 5-5 01 4 5-5 0 5 5-5 03 6 10-35 04 for Ø Overhang 1595... mm mm 8 10-35 05 10 15-50 06 1 15-50 07 www.hhw.de 1.55

Assembling Aids Tool Pre-Setters 1745 Assembling Aids Swivelling, for assembling tools without reclamping. For assembling and disassembling of ST toolholders. 1745 Mount 1745 ST 40 10 50 103 1746 Assembling Aids Aluminium cast iron housing. Easily accessible from the back. Vertical tapered mounting hole for tool holders. Horizontal mount for draw-in bolts, coolant tubes, etc. For safe assembly and disassembly of cutting tools and tool holders. 1746 for for for 1746 Taper Size Shape ST/MAS-BT 30-101 ST/MAS-BT 40-10 ST/MAS-BT 50-103 VDI 0-104 VDI 30-105 VDI 40-106 VDI 50-107 1748 0 1748 101 solid-clamp - basic body Aluminium basic body for exchangeable tool holders. 4 x 90 indexable holders. Low force necessary due to perfect ergonomics. For safe assembly and disassembly of cutting tools and tool holders. Assembly support solid-clamp for for for 1746 Taper Size Shape HSK 3 A/C/E/F 108 HSK 40 A/C/E/F 109 HSK 50 A/C/E/F 110 HSK 63 A/C/E/F 111 HSK 80 A/C 11 HSK 100 A/C 113 1748 101 1748 103-113 solid-clamp - tool holders for for 1748... Taper size Basic body - - 101 Tool holder ST/MAS-BT/CAT 30 103 Tool holder ST/MAS-BT/CAT 40 104 Tool holder ST/MAS-BT/CAT 50 105 Tool holder HSK-A 40 106 Tool holder HSK-A 50 107 Tool holder HSK-A 63 108 Tool holder HSK-A 80 109 Tool holder HSK-A 100 110 Tool holder VDI 30 111 Tool holder VDI 40 11 Tool holder VDI 50 113 1748 103-105 1.56 www.hhw.de

1755 e Robust and reliable tool pre-setters for production. The tools feature great ease of use and perfect measuring accuracy. ergonomic positioning of operating elements, one-hand operation of measuringcarriage, perfect arrangement with selective axisclamping, infinite fine adjustment with micron accuracy, pre-loaded linear guides, protected by bellowsguarantee long service life with constant accuracy, no compressed air required. Tool mount with patented needle bearing guides: plastic cage protects tool spindle from damage, true-running accuracy within microns, ST 40 or ST 50, prevents measuring errors if tool holdersare not brand new (dirty or damaged), long service life and maintenance-free. 1755 101-10 TOOL MASTER TM 10 SMART CMOS S/W with through-light illumination, µm repetability, for easy determination of length and diameter (maximum values), of radii by means of cross hairs, if desired, of angles by means of rotatable template similar to a profile projector, the touch points of the cutting edges at the cross hairs are clearly shown, independent of the operator, high-precision, with a resolution of 0,001 mm, easiest handling by means of touch screen, robust 5,7" colour TFT display with metal housing, languages: English/French/German/Italian/Spanish, 99 reference zero points can be stored, for different reduction and machine zero points, memory for 500 tools, direct and differential measuring, Tool Pre-Setters TOOL MASTER R/D reversible, compensation of axis parallelism, linear and section compensation, display of X and Z axis directly on the monitor all at a glance. easy to set up, password protection. 1755 103-104 TOOL MASTER TCAM Measuring system: precision scales, resolution 0,001 mm. Control: control of all functions by means of a mouse, multi-language dialogues, 99 reference zero points with alphanumerical display can be stored, for different reduction and machine zero points, R/D reversible, direct and differential measuring, measuring programs for calculation of radius, angle and interception, compensation of parallelism, incl. of USB label printer Dymo 400, serial interface (RS 3) for PC and other applications, USB-interface for printers, easy to set up, password protection. Image processing: automatic, detection of cutting edge geometry, independent of position, thanks to CMOS digital camera, detection of length, diameter, angle and radii, automatic and manually selectable measuring methods, additionally: measurements with fixed cross hairs, the display window can be reduced to the required profile, e.g. for progressive dies, display of X and Z axis directly on the monitor all at a glance. Clamping tools incl. of frontal illumination for cutting edge or tool measurements and inspection, similar to measuring microscope with 0-x magnification. Other versions available on request. Accessories see cat.-no. 1756. 1755 101-10 1755 103-104 TM 10 SMART TM 10 TCAM Measuring range Ø mm 50 50 Measuring range length mm 360 360 Tool holder ST 40 / 50 40 / 50 Touch camera, fixed axes camera, floating axes Magnification approx. 14/x approx. 18/x Display 5,7 inch TFT (colour) 10,4 inch TFT (colour) Measuring system glass measuring rods 1µm glass measuring rods 1µm Axis clamping mechanical mechanical Adapter zero point s 99 99 Tool memory by means of USB external (optional) 500 Radius / Ø conversion x x Direct / incremental measurements x x Interface Opti. Adapter for USB-Dymo RS3C and USB only for Dymo printer and RS3C Power supply V 90-50 90-50 L x W x H mm 436 x 46 x 814 786 x 46 x 814 Weight kg 45 45 Pre-setters 1755 TM 10 SMART / ST 40 101 TM 10 SMART / ST 50 10 TCAM / ST 40 103 TCAM / ST 50 104 www.hhw.de 1.57

Zero Point Setters Measuring arbors Edge finder Multi-purpose 3-D probes Digital 3D Probes 1756 Accessories for Tool Pre-Setters TOOL MASTER 1756 107 Accessories 1756 Reduction inserts ST 50 / ST 40 101 Reduction inserts ST 50 / VDI 0 10 Reduction inserts ST 50 / VDI 30 103 Reduction inserts ST 50 / VDI 40 104 Reduction inserts ST 40 / VDI 0 105 Reduction inserts ST 40 / VDI 30 106 Reduction inserts ST 50 / HSK 63 107 Adjusting arbor ST 40 30 x 90 mm 108 Adjusting arbor ST 50 30 x 90 mm 109 Adjusting arbor ST 40 50 x 330 mm 110 Adjusting arbor ST 50 50 x 330 mm 111 1756 110 1766 Zero Point Setters For quick and esay determination of the reference point in axial direction of machine spindle (e.g. at milling cutters). The instrument is positioned onto the workpiece and the tool (e.g. milling cutter) is moved onto the spring based probe surface, until both pointers of the dial shows 0. Lower edge of the tool is now precisely positioned 500,01 mm above workpiece surface. Size 50 mm will be stored into machine control data system. Basic body and probe insert are case-hardened HRC 60 +/- 1. With measuring certificate, in wooden case. 1766 Resolution of Height of spring Probe surface Ø Housing Ø 1766 Dial indicator mm measuring surface mm mm mm 0,01 49,5-50 47 65 101 1764 Tapered shank more accurate than AT3, case-hardened steel hardened (56+4 HRC), ground. In wooden box. For aligning and inspecting tool spindles. Measuring arbors (Test arbors) 1764 1764 301 With lock ring. Taper Shank Ø D usable measuring length L Concentricity and Ø Tolerance 1764 mm mm mm ST 40 DIN 69871 40 30 0,003 301 ST 50 DIN 69871/BT 40 30 0,003 30 HSK 63 DIN 69893 40 346 0,003 303 www.atorn.com Performance requires quality. Dial indicators by ATORN: ATORN s high-quality measuring tools. 1.58 www.hhw.de

1767 Metric Edge Finders JC-0 Clamping tools 0 Battery operated edge finder made by Renishaw, is chucked by a collet chuck or milling cutter mount. As soon as the probe insert contacts the workpiece, a red light is activated. Only electrically conductive materials can be contacted. The edge finder can be used for different measuring jobs and for zero point setting of workpieces on all manual and CNC-controlled machine tools. Features: inside and outside measuring, determination of borehole centre point centrically to working spindle, measuring reference edges, height and depth measuring. Repeatability 0,001 mm. Overrun X, Y 15 mm, Z 5 mm, protection rating: IP 44 Spare batteries see cat.-no. 39900. 5,8 MIN Ø 6,0 4,5 65,5 5 Ø 8 RENISHAW Ø 0 1767 1767 101 1768 0 1768 101 Multi-purpose 3D Probes Proven metal mechanism, compact design, dustproof and waterproof, comfortable adjustment of concentricity, one scale for radial and axial touching. Technical specifications: Clamping shank: 0 mm, Accuracy of reading: 0,01 mm, Spherical tip Ø: 4 mm. Incl. of short contact point. For determing workpiece zero points, measurements of length, boreholes, borehole centres, and reference edges. Multi-purpose 3-D Probes Milling cutter mount extra short, DIN 69871 AD, Ø 0 mm, A = 40 mm, see cat.-no. 163 13. 1768 10 Contact point insert, short, Ø 4 mm, Length 5 mm. 1768 103 Contact point, long, Ø 8 mm, Length 65 mm. 1768 101 1768 103 1768 10 1768 3D probes 101 Contact point insert, short 10 Contact point insert, long 103 1769 Digital 3D Probes A further development of the well experienced mechanical 3-D probe. The measuring procedure can be watched accurately on the digital dial. The dial consists of a 0,001 mm display with large digits. Measuring accuracy 0,005 mm, mm/inch-conversion, clamping shank Ø -0 mm, housing Ø 65 m. Dust and splash-proof. Suitable milling cutter mounts see cat.-no. 163 13. Suitable contact points see cat.-no. 1768 10+103. 1769 1769 01 www.hhw.de 1.59

Edge finder Dial Indicating Centre Finders Centre Finders 1770-1771 Edge Finders All parts hardened, chucking- and working surfaces ground, partly lapped. Tension spring inside provides elastically compensating connection to upper part of shaft. In case. For the determination of the centre line. 1770 03 With single-point contact head. 1771 05 With double-point contact head. 1770 1771 1771 500 Spare spring For cat.-no. 1770-1771. Measuring head Ø Straight shank Ø pack = 1770 1771 1771 mm mm pcs. Edge finder single 10 10-03 Edge finder double 10 + 4 10-05 Spare spring - - 10 500 177 With all-round illuminated indicator. The ball is elastically suspended and is pushed to the side when the reference edge is reached. Accuracy +/- 0,01 mm. Standard: edge finder with battery. For centring the spindle above the workpiece. For outside and inside centring. Electrical edge finder D/3D 177 101 177 10 Spare batteries see cat.-no. 39900. Shank Ø Spherical tip Ø Battery 177 mm mm V D 0 10 x 1,5 (Lady size N) 101 3D 0 10 1 x 1,0 10 1773 DIACATOR With built-in upright dial indicator and rotating probe, max. centring error depending on probe 0,006-0,01 mm. Built-in overload clutch to protect against damage. Mounts on screw-on MT 1 morse taper shank (for larger taper holes, use adapters!) or on a straight shank (8 mm Ø). Complete with pendulum probe for small holes, angled contact point inserts 5 and 48 mm, 1 reducing sleeve MT 1, 3 screw-on adapter sleeves 10 1 and 16 mm, 1 stop 160 mm and dial indicator, in wooden case. For aligning holes and shafts exactly concentrically with work spindle on milling machines, drill presses and boring mills. Dial Indicating Centre Finders 1773 Special probe, length 100, 15, 150 and 00 mm available on request. Measuring range for inside Ø Measuring range for Outside Ø 1773 mm mm 1,5-10 5,0-110 101 1.60 www.hhw.de

Clamping tools 1774 Centre Finders Centro 1774 101 High-accuracy centre finder with steady dial indicator. Accuracy 0,003 mm. For aligning boreholes. Rotational speed of spindle should not exceed 150 rpm. Concentricity errors of spindle and clamping system can be balanced out. 1774 10 Contact point insert Straight, with ball Ø 5 mm. 1774 103 Contact point insert Offset, with ball Ø 5 mm. 1774 104 Contact point insert Straight, with ball Ø mm. For small boreholes. 1774 101 1774 10 1774 103 Measuring range Measuring range Shank Ø 1774 inside Ø mm outside Ø mm mm Centro 3-15 0-15 16 101 Contact point insert straight 10 Contact point insert offset 103 Contact point insert with ball mm 104 1775 e For centring, positioning, aligning, adjusting, inspecting, face probing, edge finding, accuracy: µm. The very precise mechanism with rotating probe and the fixed dial indicator are the most important parts. Precision Centre Finders 1775 05 Precision Centre Finders C III Similar to cat.-no. 1775 04, but with precision dial indicator with 0,00 mm resolution, for high precision spindles and finest surfaces. 1775 01 1775 04-05 1775 01 Precision Centre Finders CO-S With fixed clamping shank, 16 mm Ø, dial indicator with 0,01 mm resolution. 1 contact point insert ball Ø 5 mm (for borehole), 1 bent contact point insert, ball Ø 5 mm (for shaft), in case. 1775 04 Precision Centre Finders C III For different clamping shanks (see cat.-no. 1778), dial indicator with 0,01 mm graduation. 1 straight contact point insert ball - Ø 5 mm (for borehole), 1 hexagon socket wrench size 3, bottle of watch oil no. 5, in wooden box. Reading of dial indicator Probing range Probing range Face area Probing depth Probing depth 1775 mm inside Ø mm outside Ø mm mm inside Ø mm outside Ø mm CO-S 0,01 6-15 0-15 10-160 55 0 01 C III 0,01-400 0-300 0-480 150 150 04 C III 0,00-400 0-300 0-480 150 150 05 1776 Accessories For cat.-no. 1775. 1776 10 Edge finder For positioning the work spindle axis above workpiece edges or corners 1776 103 Contact point insert Straight, ball Ø 1,7 mm. For centring holes less than 6 mm. 1776 1776 10 1776 103 10 103 www.hhw.de 1.61

Clamp Holders Indicator stands Reduction Inserts Sawblade Toolholders 1777 Accessory Kits Consists of: Contact point, Spherical tip Ø 1,7 mm for centring Boreholes below 6 mm. Angled contact point, Spherical tip Ø,5 mm for aligning surfaces from 90 mm - 80 mm Ø. Extensions for enlarging the work range. Face probe Spherical tip Ø 5,0 mm. For type C III cat.-no. 1775 04 and 05. 1777 1777 101 1778 Clamp Holders For type CO and C III cat.-no. 1775 04-05. 1778 30-304 DIN 69871 A, without gripper groove. 1778 0-04 1778 30-304 1778 10-103 Morse taper shank. 1778 501-503 Straight shank. 1778 0-04 DIN 080, cat.-no. 1778 0 with lock ring. Taper MT/ Taper ST/ Cylinder-Ø 1778 draw-in thread draw-in thread mm 3/M 1 10 4/M 16 103 40/M 16 0 50/M 4 04 40/M 16 30 50/M 4 304 16 501 0 50 5 503 1780 Link- Indicator Stand Mechanical centre clamping of all links, clamping power infinitely adustable, each position within working range can be reached. Dial indicator hole 8 mm, length = 40 mm for direct mounting into the machine (collet!). For lever gauges. Suitable for: workpiece positioning, centring of bores/pilots, aligning of workpieces, for difficult to reach areas. 1780 Lever gauges see cat.-no. 3346 cont. 1780 01 1634 With straight shank in compliance with DIN 1835 B. Concentricity deviation of taper to internal taper 0,005 mm. Used as reduction inserts in milling cutter mounts for milling cutters with small diameters. Reduction Inserts for End Milling Cutters 1634 1.6 d H 4 d 1 A D l 1634 mm mm mm mm mm 6 0 30 5 50 103 8 0 30 8 50 104 10 0 30 35 50 105 1 0 35 4 50 106 www.hhw.de d H 4 d 1 A D l 1634 mm mm mm mm mm 6 3 30 5 60 107 8 3 30 8 60 108 10 3 30 35 60 109 1 3 35 4 60 110 16 3 38 48 60 111

1635 Spare screws for Weldon Clamping tools 1635 Thread for diameter 1635 mm M 6 6 601 M 8 8 60 M 10 10 603 M 1 1+14 604 M 14 16+18 605 Thread for diameter 1635 mm M 16 0 606 M 18 X 5 607 M 0 X 3 608 M 0 x 40 609 1636 Sawblade Toolholders With straight shank for mounting in surface chucks, high true-running accuracy. For chucking sawblades cat.-no. with Ø from 0-100 mm and sawblade thickness from 0,-6 mm (see cat.-no. 1700-17008 and 17030-17031). Sawblades not included. 1636 300 Set, 6-part, consists of all sizes of cat.-no. 1636 301-306, incl. of case. 1636 301-308 Single. 1636 300 Set Chucking-Ø 1636... mm 6 part 0 / 5 / 3 / 40 / 50 / 63 300 1636 301-308 for saw blade Ø L1 Ø D1 Ø D Ø D3 1636 mm mm mm mm mm 0 90 0 10,0 5 301 5 100 0 13,0 8 30 3 105 0 16,0 8 303 40 110 0 16,5 10 304 50 136 5 4,5 13 305 63 136 5 4,5 16 306 80 150 5 34,0 307 100 150 5 39,5 308 saw blade Ø www.atorn.com Performance requires quality. Multiple clamps by ATORN: ATORN s high-quality clamping tools. www.hhw.de 1.63

Driving rings Milling Cutter Draw-In Screws Milling cutter arbor collars 1655 Driving rings For combination milling cutter arbors, cat.-no. 1648-1650. 1655 d 1 for milling cutter arbor Ø d h 1 d 3 h d 1 1655 mm mm mm mm mm 16 10 8 5,0 3 0 1 10 5,6 40 03 7 1 1 6,3 48 04 3 14 14 7,0 58 05 40 14 16 9,0 70 06 h 1 d 3 d h 1656 Milling Cutter Draw-In Screws without borehole. For combination milling cutter arbors, milling head mounts, and milling cutters with transverse slot. 1656 for milling cutter arbors with pilot Ø Draw-in screw thread 1656 mm 10 M 5 101 13 M 6 10 16 M 8 103 M 10 104 7 M 1 105 3 M 16 106 40 M 0 107 1657 Wrench for Milling Cutter Draw-in Screws Special steel, hardened and black finisshed. For tightening the milling cutter draw-in screws DIN 6367. 1657 for milling cutter arbors with pilot Ø 1657 mm 13 10 16 103 104 7 105 3 106 40 107 1659 Milling Cutter Draw-In Screws Consists of a stud bolt with hexagon socket (for turning with a hexagon socket key and a threaded collar which screws on to it). For miling cutter arbors, milling head mounts, and milling cutters with transverse slot. 1659 Tremendous gripping power is achieved by the different pitches on the stud bolt. When screwing down, the threaded collar bears against the face of the milling cutter and does not turn with the stud bolt any more. No damage to the milling cutter, and less axial and radial eccentricity! d ; ; l 3 r l d 1 SW for milling cutter arbors with pilot Ø Draw-in screw thread Thread length Allen Key threaded collar Ø x Thickness 1659 mm (d 1 ) (l ) mm size mm (d x l 3 ) mm 16 M 8 13,0 5 0 x 7 101 M 10 14,4 6 8 x 8 10 7 M 1 17,5 8 35 x 9 103 3 M 16 0,5 10 4 x 10 104 40 M 0 4,0 1 5 x 11 105 1.64 www.hhw.de

1665 Milling Cutter Arbor Collar Sets Clamping tools Punched type, in plastic pouch. For preventing the milling cutters on milling cutter arbors from laterally shifting. 1665 101-105 Assortment A, 60 pcs. 1665 106-110 Assortment B, 35 pcs. Contents: Collar width mm 0,03 0,04 0,05 0,1 0, 0,3 0,5 0,6 1,0 1,5 Stückzahl gesamt Assortment A, no. of pcs. no. of pcs. 10 10 10 10 5 5 4 3 1 60 Assortment B, no. of pcs. no. of pcs. 5 5 5 6 3 3 3 1 35 1665 Assortment A Borehole 1665 mm 16 101 10 7 103 3 104 40 105 Assortment B Borehole 1665 mm 16 106 107 7 108 3 109 40 110 1666 Milling Cutter Arbor Collars Made of sping-tempered strip steel, punched and deburred. Keyway in compliance with DIN 138. For preventing the milling cutters on milling cutter arbors from laterally shifting. 1666 Borehole 16 mm mm 7 mm 3 mm 40 mm 50 mm Size 1666 1666 1666 1666 1666 1666 mm 0,03 110 119 18 137 146 0,04 111 10 19 138 147 0,05 11 11 130 139 148 157 0,1 113 1 131 140 149 158 0, 114 13 13 141 150 159 0,3 115 14 133 14 151 160 0,5 116 15 134 143 15 161 0,6 117 16 135 144 153 16 1,0 118 17 136 145 154 163 1667 Milling Cutter Arbor Collars Turned from steel, hardened, face is ground parallel and lapped. Keyway in compliance with DIN 138. 1667 Borehole 16 mm mm 7 mm 3 mm 40 mm 50 mm Size 1667 1667 1667 1667 1667 1667 mm 111 11 131 141 151 161 3 11 1 13 14 15 16 4 113 13 133 143 153 163 5 114 14 134 144 154 164 6 115 15 135 145 155 165 10 116 16 136 146 156 166 0 117 17 137 147 157 167 30 118 18 138 148 158 168 www.atorn.com Performance requires quality. Swivel bases by ATORN: ATORN s high-quality turning tools. www.hhw.de 1.65

Revolving head Quick-change toolholder 1870 4-x Revolving Head (RD) and Multi-purpose Quick-change Toolholder (UD) Precise production thanks to the high repeatability and turn down precision (0,005 mm). No change of tools: internal and external fit with one clamping procedure. Quick-clamping mechanism - for type RD, graduation 9 with 40 positions. Available in 4 sizes. Up to 4 tool holders can be clamped at any one time. For machining precise turning parts thanks to highprecision tool exchange system with perfect user friendliness. Quick-change toolholder see cat.-no. 1871-1876. 1870 101-104 Parat 4-x revolving head type RD Clamping of 4 tool holders is possible. Manual pivoting, graduation catching every 9 = 40 positions. Wrench, double-ended gooseneck socket wrench, socket wrench. 1870 101-104 1870 301-304 1870 01-04 Parat 4-x revolving head with internal coolant feed type RD/ICF Clamping of 4 tool holders is possible. Manual pivoting, graduation catching every 9 = 40 positions. Wrench double-ended gooseneck socket wrench, socket wrench, clamping screw with Inner hole, coolant hose, connector, angled connector, screw. 1870 301-304 Parat -x multi-purpose quick-change toolholder type UD Budget version of type RD. For mounting tool holders, rotated 90. Tool holders are compatible with RD. Double-ended gooseneck socket wrench, socket wrench. Technical specifications for determining size Size 1 3 4 Driving power lathe max. KW 3,7 7,4 14,7 Turning tool diameter max. A 0 5 40 50 Tool cutting height B 30 40 60 80 Tool slide width min. C 90-100 110-150 150-180 00-50 Revolving head (square-end basic body) D 84 106 134 154 Index plate with protective ring Ø E 80 10 133 150 Turning range with tool holder Ø G 180 40 300 350 Clamping screw in support J M 14 x M 16 x M 0 x,5 M 4 x 3 K 1 5 30 35 Weight approx. (without tool holder) kg 3,5 6,5 15 RD RD/ICF UD Size 1870... 1870... 1870... 1 101 01 301 10 0 30 3 103 03 303 4 104 04 304 1.66 www.hhw.de

1871-1876 Quick-change Toolholder Clamping tools Accessories for cat.-no. 1870. 1871 Quick-change toolholder type WD For internal and external machining. 1876 Quick-change toolholder type WBW (unfinished) With soft, untreated clamping area for special tools. 1871 187 Quick-change toolholder type WDL For internal machining. 187 1873 Quick-change toolholder type WDR For external machining. 1874 Quick-change toolholder type WDPL For boring bars. 1875 Quick-change toolholder type WB For mounting clamping sleeves (see cat.-no. 1877-1878). 1873 size N O P R S U kg WD 1/1 84 4 47 14-0,7 WDL/WDR 1/1 100 4 47 14 16 0,8 WD 1/0 84 33 5 0-0,8 WDL/WDR 1/0 100 33 5 0 16 0,9 WDPL 1/1 100 8 47 16 16 0,9 WB/WBW 1/30 84 39 47 30 - - 0,8 WD /5 110 36 66 19 33-1,9 WDL/WDR /5 130 36 66 19 33 0,1 WDPL /5 130 50 6 31 33 0,3 WB/WBW /40 110 51 63 40 - - 1,8 WD 3/3 140 44 76 5 33-3,0 WDL/WDR 3/3 165 44 76 5 33 5 3,4 WDPL 3/3 165 53 66 31 33 5 3,6 WD 3/40 140 44 76 5 43-3,1 WDL/WDR 3/40 165 44 76 5 43 5 3,4 WB/WBW 3/40 140 53 66 40 - -,7 WB/WBW 3/50 140 63 76 50 - - 3,5 WD 4/40 160 53 96 30 44-5,0 WDL/WDR 4/40 190 53 96 30 44 30 5,8 WDPL 4/40 190 63 96 40 5 30 6,5 WD 4/50 160 63 96 40 54-5,5 WDL/WDR 4/50 190 63 96 40 54 30 6,0 WB/WBW 4/60 160 77 96 60 - - 6,0 WD WDL WDR WDPL Size for 1871... 187... 1873... 1874... revolving head/size 1/1 type RD/1 and type UD/1 101 101 101 101 1/0 type RD/1 and type UD/1 10 10 10 /5 type RD/ and type UD/ 103 103 103 10 3/3 type RD/3 and type UD/3 104 104 104 103 3/40 type RD/3 and type UD/3 105 105 105 4/40 type RD/4 and type UD/4 106 106 106 105 4/50 type RD/4 and type UD/4 107 107 107 1874 1875 1876 WB WBW Size for 1875... 1876... revolving head/size 1/30 type RD/1 and type UD/1 101 101 /40 type RD/ and type UD/ 10 10 3/40 type RD/3 and type UD/3 103 103 3/50 type RD/3 and type UD/3 104 104 4/60 type RD/4 and type UD/4 105 105 www.hhw.de 1.67

Clamping sleeves Taper Bore Cleaners 1877-1878 Clamping Sleeves 1877 Clamping sleeves for quick-change toolholder type WB (see cat.-no. 1875) For mounting tools with MT shank. 1878 Clamping sleeves, slotted, for quick-change toolholder type WB (see cat.-no. 1875) For clamping tools with straight shank. For MT 1877... Quick-change toolholder WB 1/30 1 101 WB 1/30 10 WB +3/40 3 103 WB +3/40 4 104 WB 3/50 3 105 WB 3/50 4 106 WB 4/60 4 107 WB 4/60 5 108 For inside Ø 1878... Quick-change toolholder mm WB 1/30 8 101 WB 1/30 10 10 WB 1/30 1 103 WB 1/30 15 104 WB 1/30 16 105 WB 1/30 0 106 WB 1/30 5 107 WB +3/40 10 109 WB +3/40 1 110 WB +3/40 15 111 WB +3/40 16 11 WB +3/40 0 113 WB +3/40 5 114 WB +3/40 3 115 WB 3/50 0 117 WB 3/50 5 118 WB 3/50 3 119 WB 3/50 40 10 WB 4/60 5 13 WB 4/60 3 14 WB 4/60 40 15 1877 1878 950-956 Taper Bore Cleaners Made of impact-proof, fleece-covered plastics, inserted into guides, does not rotate. Most resistant against oil and grease, high grade of tolerance stability. For quick and thorough cleaning of tool adapters. 950 For morse taper shank 951 For ST. 955 For HSK tool mountings. 950 951 956 For cylindrical tool mountings and bores. For taper 950 MT 1 301 30 3 303 4 304 5 305 For taper 955 HSK 3 101 40 10 50 103 63 104 80 105 100 106 For taper 951 ST 30 01 40 0 50 03 Str. 956 TKC 16 101 0 10 5 103 3 104 40 105 955 956 1.68 www.hhw.de

www.atorn.com Performance requires quality. Short chucks by ATORN: ATORN s high-quality clamping tools. 1.69

Toolheads Toolholders 0 Quick-change Toolholder cat.-no. 1880-1898 Toolhead and toolholder profile-ground. The tool height can be adjusted using a knurled thumbscrew on the toolholder without inserting shims. Repeatability 0,01 mm. The toolholders can easily be released and locked into position using an eccentric clamping lever Tool can be set to 40 different angles. East to operate short set-up times! Installation on the lathe: The toolhead with ground tetth is fastened using the slide bolt. The inside diameter of the centring bolt must than be turned to the size of the slide bolt (snug fit not required). We recommend aligning the toolhead perpendicularly to the face plate, with the boring bar holder and boring bar positioned. The toolhead is secured by two dowel pins in the slide. Then set the scale to 0 and tighten the nut on the slide bolt accordingly. When choosing the size, please consider the following: 1. Driving power of lathe.. Minimum dimension required x. 3. The length of the toolholder»i«should correspond with width z of the top support. 4. Tool height h. can be calculated from tool height h and tool height y and the space below (see table). When the tool height h is (see table), the tool height x has to be at least (see table): Example for a size choice: Machine drive power KW 6 Machine swing mm 500 Slide width z mm 145 Tool height h mm 30 Tool cutting height x mm 45 Parts needed: Tool head size B (cat.-no. 1880 104) Tool holder type B D 3 x 140 (cat.-no. 188 11) Tool holder type B H 30 x 130 (cat.-no. 1884 04) Tool holder type B J 40 x 10 (cat.-no. 1886 05) Tool holder type BA-Aa (cat.-no. 1896 03) The borehole of the centring disc must be enlarged to be at least as big as the clamping screw. Size Aa A E B C D 1 Tool height x x x x x x h mm D 1 D 16 D 0 D 0 D5 D 5 D 3 D 3 D 40 D 45 D 40 D 50 D 63 6 1 8 14 17 10 16 19 19 0 1 1 18 1 1 3 4,5 6 (14) 3 3 4 5 6,5 8 9 16 5 5 6 7 8,5 30 31 3 0 9 30 31 3,5 34 35 36 37 5 36 37,5 39 40 41 4 45 (30) 44 45 46 47 50 51 5 3 46 47 48 49 5 53 54 40 56 57 60 61 6 50 71 7 63 85 Technical specifications: Size Aa A E B C D 1 Tool holder size D 1 D 16 D 0 D 0 D 5 D 5 D 3 D 3 D 40 D 45 D 40 D 50 D 63 Machine drive power approx. kw 1,, 5,0 6,6 13,,0 Machine swing 10-0 150-300 00-400 300-500 400-700 - - 600-1000 Slide width max. z mm 80 100 10 150 180 00 Tool cutting height min. x mm h + y h + y h + y h + y h + y h + y Tool cutting height max. mm x + hv x + hv x + hv x + hv x + hv x + hv Height adjustment hv mm 8 11 17 15 0 11 40 35 30 35 30 0 Steel tool support y mm 6, 9,1 10,1 10,5 1 1 13,5 17 18 18 0,5 Support width for cutting tool d mm 10 14 16 16 0 0 1 30,5 30,5 30 34 40 Height of cutting tool max. h mm 1 Overall width max. v mm 70 100 15 150 19 0 0 30 34 4 Overall height s mm 3 54 68 75 105 1 Overhang max. u mm 30 48 60 71 9 10 10 11 117 14 Borehole standard t mm 1 0 0 3 40 40 Borehole max. t max. mm 1 3 4 51 74 8 Depth of borehole max. e mm 35 35 45 75 75 Weight without tool holder kg 0,34 1, 3,5 4,5 10,7 18,0 1880 101 10 103 104 105 106 1.70 www.hhw.de

Clamping tools Toolheads a 1880 0 For mounting toolholders. Spare parts see cat.-no. 1898. 1880 Size 1880 Aa 101 A 10 E 103 B 104 C 105 D 1 106 Z hv x y h d u v s r t t max e 188 0 For mounting tool bits with square shank. Toolholders D 188 l 1 for a l 1 188 Size mm mm Aa D 1 x 50 Aa 1 50 01 A D 0 x 75 A 0 75 04 A D 0 x 90 A 0 90 05 E D 0 x 100 E 0 100 06 E D 5 x 100 E 5 100 07 B D 5 x 10 B 5 10 08 B D 5 x 140 B 5 140 09 B D 3 x 10 B 3 10 10 B D 3 x 140 B 3 140 11 1884 0 For mounting tool bits with round shank. Toolholders H for a l 1 188 Size mm mm C D 3 x 150 C 3 150 1 C D 3 x 170 C 3 170 13 C D 40 x 150 C 40 150 14 C D 40 x 170 C 40 170 15 C D 45 x 170 C 45 170 16 D 1 D 40 x 180 D 1 40 180 17 D 1 D 50 x 180 D 1 50 180 18 D 1 D 63 x 180 D 1 63 180 19 1884 l 1 d max for d max l 1 1884 Size mm mm Aa H 1 x 50 Aa 1 50 01 A H 0 x 85 A 0 85 0 E H 30 x 100 E 30 100 03 B H 30 x 130 B 3 130 04 1886 Toolholders J 0 For mounting boring bars und round tool bits. for d max l 1 1884 Size mm mm C H 40 x 160 C 40 160 05 C H 50 x 160 C 50 160 06 D 1 H 63 x 180 D 1 63 180 07 1886 d l 1 for Borehole d l 1 1886 Size mm mm Aa J 15 x 50 Aa 15 50 01 A J 30 x 80 A 30 80 0 E J 30 x 100 E 30 100 03 E J 40 x 100 E 40 100 04 for Borehole d l 1 1886 Size mm mm B J 40 x 10 B 40 10 05 C J 40 x 160 C 40 160 06 C J 50 x 160 C 50 160 07 D 1 J 63 x 180 D1 63 180 08 www.hhw.de 1.71

Sleeves Prism Inserts Cutting-Off Toolholders Square Mounts 1888 Sleeves L 0 With internal taper. For boring bar toolholders cat.-no. 1886. 1888 for d taper 1888 Size mm MT L 30 x A/E 30 01 L 40 x 3 E/B/C 40 3 0 L 40 x 4 B/C 40 4 03 L 50 x 3 C 50 3 04 L 50 x 4 C 50 4 05 L 63 x 5 D 1 63 5 06 MK d 1894 0 For tool holder cat.-no. 1884. Prism Inserts P 1894 for d max. l 1 1894 Size mm mm A P 14 x 85 A 14 85 101 E P 14 x 100 E 14 100 10 B P 0 x 130 B 0 130 103 C P 5 x 160 C 5 160 104 C P 3 x 160 C 3 160 105 D 1 P 40 x 180 D 1 40 180 106 d max l 1 1896 0 For mounting KOMET cutting-off tool bits. Cutting-Off Toolholders A 1896 for KOMET cross-section 1896 Size Size mm AA-AO A A0 10 x,7 01 EA-AO E A0 10 x,7 0 BA-Aa B Aa 16 x 4/3 03 CA-A3a C A3a 18,5 x 5/4 04 1898 0 For cat.-no. 1880-1886 and 1896. Spare Parts for Toolholders 1898 Description for Toolholder 1898 Clamping lever 8 mm Aa 01 Clamping lever 1 mm A 0 Clamping lever 17 mm E/B/C 03 Clamping lever mm D 1 04 Square head screw Aa 10 Square head screw A/E 11 Square head screw B 1 Square head screw C/D 1 13 Height adjustment screwwith nut Aa 301 Height adjustment screwwith nut A/E 30 Height adjustment screwwith nut B 303 Height adjustment screwwith nut C 304 Height adjustment screwwith nut D 1 305 1.7 www.hhw.de

Clamping tools. VDI Toolholders in Compliance with DIN 69880 0 MnCr5 hardened to 60 +/- HRC. Working surfaces ground. With point ball nozzle and thread nipple for pipe fittings. 1 Shapes B1 and B5 Shapes B and B6 3 Shapes B3 und B7 4 Shapes B4 und B8 5 Shape C1 6 Shape C 7 Shape C3 8 Shape C4 1903-1904 Short type. For external machining. For square tools. Square Transverse Mounts Shape B1/B 1903 Shape B1, radial, clockwise. 1904 Shape B, radial, counterclockwise. 1903 Shank d b b 1 b h 1 h h 3 h 4 l l 1 1903 1904 mm mm mm mm mm mm mm mm mm mm 0 55 7,0 30,0 16 1 5,0 30 30 16 310 110 30 70 10,0 35,0 0 16 8,0 38 40 311 111 40 85 1,5 4,5 5 0 3,5 48 44 31 11 50 100 16,0 50,0 3 5 35,0 60 55 30 313 113 1908-1909 Short type. For overhead work. For square tools. Square Transverse Mounts Shape B3/B4 1908 Shape B3, radial, clockwise. 1909 Shape B4, radial, counterclockwise. 1908 Shank d b b 1 b h 1 h h 3 h 4 l l 1 1908 1909 mm mm mm mm mm mm mm mm mm mm 0 55 7,0 30,0 16 1 30 5,0 30 16 310 110 30 70 10,0 35,0 0 16 38 35,0 40 311 111 40 85 1,5 4,5 5 0 48 4,5 44 31 11 50 100 16,0 50,0 3 5 60 50,0 55 30 313 113 1905-1906 Long type. For external machining. For square tools. Square Transverse Mounts Shape B5/B6 1905 Shape B5, radial, clockwise. 1906 Shape B6, radial, counterclockwise. 1905 Shank d b b 1 b h 1 h h 3 h 4 l l 1 1905 1906 mm mm mm mm mm mm mm mm mm mm 30 100 15,0 65,0 0 16 8,0 38 40 311 111 40 118 1,5 65,5 5 0 3,5 48 44 31 11 50 130 16,0 80,0 3 5 35,0 60 55 30 313 113 www.hhw.de 1.73

Square Mounts Twist Drills with Reversible Cutting Inserts Boring bar mounts 1911-191 Long type. For overhead work. For square tools. Square Transverse Mounts Shape B7/B8 1911 Shape B7, radial, clockwise. 191 Shape B8, radial, counterclockwise. 1911 Shank d b b 1 b h 1 h h 3 h 4 l l 1 1911 191 mm mm mm mm mm mm mm mm mm mm 30 100 15,0 65,0 0 16 38 35,0 40 311 111 40 118 1,5 65,5 5 0 48 4,5 44 31 11 50 130 16,0 80,0 3 5 60 50,0 55 30 313 113 1915 Short version, shape C1, axial, clockwise. For face recessing. For square steel bars. Square Longitudinal Mounts Shape C1 1915 Shank d b b 1 h 1 h h 3 h 4 l l 1 l 1915 mm mm mm mm mm mm mm mm mm mm 0 5 5,5 16 1 5,0 30 50 30 310 30 70 17,0 0 16 8,0 38 70 10,0 30 311 40 85 0,5 5 0 3,5 48 85 1,5 30 31 50 100 5,5 3 5 35,0 60 100 16,0 40 313 1916 Short version, shape C, axial, counterclockwise. For face recessing. For square tools. Square Longitudinal Mounts Shape C 1916 Shank d b b 1 b h 1 h h 3 h 4 l l 1 l 1916 mm mm mm mm mm mm mm mm mm mm mm 0 65 6,0 40,0 16 1 5,0 30 50 30 110 30 76 3,0 41,0 0 16 8,0 38 70 10,0 30 111 40 90 5,5 47,5 5 0 3,5 48 85 1,5 30 11 50 105 30,5 55,0 3 5 36,0 60 100 16,0 40 113 1918 Short version, shape C3, axial, clockwise. For overhead face recessing. For square tools. Square Longitudinal Mounts Shape C3 1918 Shank d b b 1 h 1 h h 3 h 4 l l 1 1918 mm mm mm mm mm mm mm mm mm 0 5 13 16 1 30 5,0 50 310 30 70 17 0 16 38 35,0 70 10,0 311 40 85 1 5 0 48 4,5 85 1,5 31 50 100 6 3 5 60 50,0 100 16,0 313 1.74 www.hhw.de

1919 Short version, shape C4, axial, counterclockwise. For overhead face recessing. For square tools. Square Longitudinal Mounts Shape C4 Clamping tools 1919 Shank d b b 1 b h 1 h h 3 h 4 l l 1 l 1919 mm mm mm mm mm mm mm mm mm mm mm 0 65 6,0 43,0 16 1 30 5,0 50 30 110 30 76 3,0 41,0 0 16 38 35,0 70 10,0 30 111 40 90 5,5 47,5 5 0 48 4,5 85 1,5 30 11 50 105 30,5 50,0 3 5 60 50,0 100 16,0 40 113 190 With internal coolant feed, shape E1, axial. Mounts for Twist Drills for Reversible Cutting Inserts Shape E1 For mounting twist drills for reversible cutting inserts. 190 Shank d d 1 D D 1 h l l 1 Boring depth 190 mm mm mm mm mm mm mm mm 0 0 50 40,0 60 18 54 01 0 5 50 45,0 66 18 59 0 30 0 68 40 8,0 66 54 03 30 5 68 45 8,0 71 59 04 30 3 68 5 8,0 75 63 05 40 0 83 40 3,5 66 54 06 40 5 83 45 3,5 71 59 07 40 3 83 5 3,5 75 63 08 40 40 83 60 3,5 85 73 09 50 0 98 40 35,0 66 30 54 10 50 5 98 45 35,0 71 30 59 11 50 3 98 5 35,0 75 30 63 1 50 40 98 60 35,0 85 30 73 13 19 With coolant feed via spray nozzles, shape E, axial. Boring Bar Mounts Shape E For mounting boring bars. 19 Shank d d 1 D D 1 h l l 1 19 mm mm mm mm mm mm mm 0 8 50 40 5,0 50 15 101 0 10 50 40 5,0 50 15 10 0 1 50 40 5,0 50 15 103 0 16 50 44 5,0 50 15 104 0 0 50 49 5,0 50 105 0 5 50 54 5,0 50 106 30 8 68 50 8,0 60 1 107 30 10 68 50 8,0 60 1 108 30 1 68 50 8,0 60 1 109 30 16 68 55 8,0 60 1 110 30 0 68 55 8,0 60 1 111 30 5 68 55 8,0 60 1 11 30 3 68 68 8,0 65 113 40 8 83 50 3,5 75 1 114 40 10 83 50 3,5 75 1 115 40 1 83 50 3,5 75 1 116 40 16 83 55 3,5 75 1 117 40 0 83 55 3,5 75 1 118 40 5 83 60 3,5 75 1 119 40 3 83 7 3,5 75 1 10 40 40 83 83 3,5 85 11 50 1 98 56 35,0 90 5 1 50 16 98 56 35,0 90 5 13 50 0 98 56 35,0 90 5 14 50 5 98 65 35,0 90 5 15 50 3 98 68 35,0 90 5 16 50 40 98 80 35,0 90 5 17 www.hhw.de 1.75

Collet chucks Short chucks Morse taper shank mounts 194 Coolant feed via collet, shape E3, axial. For centring and drilling. OZ Collet Chuck E3 OZ collets see cat.-no. 155-1554. 194 Shank d D D 1 h l l 1 Clamping range Ø for collets 194 mm mm mm mm mm mm mm type 0 50 43,0 55 18-16 410 E/415 E 101 30 68 60 8,0 75 30-5 444 E/46 E 10 40 83 60 3,5 75-5 444 E/46 E 103 40 83 7 3,5 90 4-3 450 E/467 E 104 50 98 7 35,0 90 30 4-3 450 E/467 E 106 196 Coolant feed via the collet, shape E4, axial. For centring and drilling. ER Collet Chuck E4 ER collets see cat.-no. 1519-158. 196 Shank d D D 1 h l l 1 Clamping range Ø for collets 196 mm mm mm mm mm mm mm type 0 50 4 5,0 55 18 1-16 ER/ESX 5/430 E 01 30 68 4 8,0 55 1-16 ER/ESX 5/430 E 03 30 68 50 8,0 55-0 ER/ESX 3/470 E 04 40 83 50 3,5 75-0 ER/ESX 3/470 E 05 40 83 63 3,5 75 3-6 ER/ESX 40/47 E 06 1931 Short Chucks Short type, wear parts hardened and ground, high true-running accuracy. Wrench with T-handle for high power. 1931 Shank d Clamping range D L 1931... mm mm mm mm 0 1,0-13 50 88 101 30 1,5-16 50 98 103 40 1,5-16 50 98 105 1.76 www.hhw.de

199 0 Short type, wear parts hardened and ground, high true-running accuracy. Wrench with T-handle for high power. Short Chucks 1-16 mm Clamping tools 199 Shank d1 Clamping range D A 199... mm mm mm mm 30 1-16 50 87 10 40 1-16 50 87 103 198 Short Chucks 0 Short type, wear parts hardened and ground, high true-running accuracy. Wrench with T-handle for high power. 198 Shank d Clamping range D L L 1 max. weight 198... mm mm mm mm mm kg 30 0,5-13 50 90 96 1,8 10 30,5-16 57 95 101,0 103 40 0,5-13 50 90 96,3 104 40,5-16 57 95 101,5 105 1930 Shape F1, axial. For mounting tools with MT shank. Morse Taper Shank Mounts Shape F1 1930 Shank d MT D D 1 h l l 1 1930 mm mm mm mm mm mm 0 1 50 50 5,0 01 30 1 68 5 8,0 5 5 03 30 68 58 8,0 4 5 04 30 3 68 68 8,0 66 05 40 83 58 3,5 34 5 06 40 3 83 64 3,5 58 5 07 40 4 83 7 3,5 86 5 08 50 98 35,0 5 09 50 3 98 64 35,0 4 5 10 50 4 98 7 35,0 71 5 11 www.hhw.de 1.77

Tapping Chucks Cutting-Off Toolholders Workpiece stops Bar gripper Reduction sleeves Unfinished parts Protection Caps 1935 Tapping Chucks With Length compensation in response to compression and tension. For mounting quick-change tapping chuck sleeves. Quick-change sleeves see cat.-no. 1459-1460. 1) Clamping ring, ) Insert mount. 1935 Size Shank d h 6 for taps l 1 d 1 d Length compensation 1935 mm mm mm mm compr./tension mm 1 0 M 3-1 55 38 19 9/9 01 1 30 M 3-1 55 38 19 9/9 0 30 M 6-0 77 55 31 15/15 03 1 40 M 3-1 55 38 19 9/9 04 40 M 6-0 77 55 31 15/15 05 Tapping Chucks With Length compensation in response to compression and tension. For mounting collets with inner square. 1937 Collets see cat.-no. 157. 1937 Shank d D D 1 h 3 l d 1 Taps Length compensation 1937 mm mm mm mm mm mm 30 68 4 8,0 75 1-16 M 4 - M 0 15 01 40 83 4 3,5 75 1-16 M 4 - M 0 15 0 1940 Cutting-Off Toolholders With mount for cut-off blades. h1 l d A B 1940 Cut-off blades see cat.-no. 1867 and 18680. b b C Shank d b b h 1 l Diagram 1940 mm mm mm mm mm 30 70 35,0 6,0 50 A = clockwise 101 30 70 35,0 6,0 50 B = counterclockwise 10 30 70 35,0 6,0 50 C = overhead 103 40 85 4,5 3,0 50 A = clockwise 105 40 85 4,5 3,0 50 B = counterclockwise 106 40 85 4,5 3,0 50 C = overhead 107 194 Workpiece Stops Live exchangeable stop surface with length adjustment. For the exact positioning of workpieces. h3 d 194 D D1 D l Shank d D D 1 D h 3 l 194 mm mm mm mm mm mm 30 68 38 5 8,0 65-100 101 40 83 60 40/80 3,5 80-150 10 1.78 www.hhw.de

l Clamping tools 1947 Bar Gripper Complete with sets of gripper jaws. The bar gripper is used primarily as a gripper chuck for advancing bars. This eliminates the use of a bar feed unit and workpiece stop. d1 h1 l1 DIN 69880 l l3 d-d3 b b1 1947 Shank VDI d1 Clamping range 1 d Clamping range d3 b1 b h1 l1l (stroke) l3 1947 mm mm mm mm mm mm mm mm mm 0 6-56 54-110 50 8 7 46 4 51 01 30 6-56 54-110 50 8 7 46 4 51 0 40 10-60 54-110 60 8 110 48 4 53 03 193 Reduction Sleeves Suitable for tool holder shape E, see cat.-no. 19. Compatible with internal coolant feed. For reduction of tools with straight shank e.g. boring bars and fine turning tools. 193 d 1 d L 193 mm mm mm 5 6 50 101 5 8 50 10 5 10 50 103 5 1 50 104 5 14 50 105 5 16 50 106 5 0 70 107 3 6 70 108 3 8 70 109 3 10 70 110 3 1 70 111 3 14 70 11 d 1 d L 193 mm mm mm 3 16 70 113 3 0 70 114 3 5 80 115 40 6 80 116 40 8 80 117 40 10 80 118 40 1 80 119 40 14 80 10 40 16 80 11 40 0 80 1 40 5 80 13 40 3 80 14 1901 Unfinished Parts A Round, unhardened, but with hardened and ground shank, dimensions in compliance with DIN 69880 -part - shape A. 1901 Shank d D l 1901 mm mm mm 0 50 70 01 30 68 40 0 40 83 30 03 50 98 400 04 1943-1944 Protection Caps To protect empty mounts in the revolving head. 1943 Made of plastics. d 1 1943 1944 1944 Made of steel. h 1 d 3 Shank d 1 d 3 h 1 l 1943 1944 mm mm mm mm 30 68 8,0 16 101 101 40 83 3,5 0 10 10 www.hhw.de 1.79

Driven tools for CNC lathes Precision tools, made in Germany All tools are thoroughly tested on several levels on our test bed, in order to inspect operating temperature, tightness, noise emission, and concentricity. Each component is machined to highest precision on our own machine tools. mimatic mi modular tool holders The mi-interface is based on the HSK: short taper with face rest. The mi-system offers the following: internal coolant flow continuous tool clamping system tool presetting concentricity accuracy < 0.00 mm quick-change An option for all driven tools 1.80 www.hhw.de

Driven tools for CNC lathes and machining centres are available for all renowned manufacturers: mimatic also offers multi-spindle tools and other solutions. For you enquiry, please use the form provided at www.hhw.de. Quality features of the driventools of mimatic most of the time, with 3-x spindle bearing plus needle bearing guides most of the time, monoblock design of highest rigidity low-friction seals Internal or external coolant feed ground cogwheels for long service life with adjustable face clearance www.hhw.de 1.81

www.atorn.com Performance requires quality. A-Cut recessing systems by ATORN: ATORN s high-quality turning tools.