MAX OPERATING WEIGHT: 73,37 lb (33,2 kg) NET ENGINE POWER: 29 hp (200 kw) E I H M N J F K L G C A STATIC DIMENSIONS Dimensions in ft-in (mm) LC A Track Length on Ground 12- (39) B Undercarriage Overall Length 15-9 (4) C Track Gauge - (200) D Width Over Tracks (24 in (00 mm) trackshoes) - (3200) D Width Over tracks (2 in (700 mm) trackshoes) - (3300) D Width Over Tracks (32 in (00 mm) trackshoes) 11-2 (3400) D Width Over Tracks (3 in (900 mm) trackshoes) 11- (3500) Dipper Lengths 7 ft 3 in ft 7 in ft 7 in 13 ft 2 in Dimensions in ft-in (mm) E Transport Length 3-4 (11,070) 3-0 (,90) 35- (,0) 3-0 (,970) F Transport Height 11- (3) 11-9 (3570) 11-3 (330) 12- (350) Dimensions in ft-in (mm) LC G Counterweight Clearance 3-11 (1190) H Tail Swing Radius -9 (320) I Overall Width of Superstructure 9- (2290) J Height Over Cab -5 (3170) K Ground Clearance 1-7 (500) L Track Height 3-4 (2) M Tail Length - (3250) N Height Over Grab Rail - (319)
ENGINE Model: Isuzu AH HK1X Tier 4i Type : Water cooled, 4-stroke, -cylinder in-line, common rail direct injection, turbocharged and intercooled diesel with diesel particulate filter. Net Power (SAE J1349 and 0/129/EEC): 29 hp (200 kw) at 2,000 rpm. Gross Power: 25 hp (212 kw) at 2,000 rpm. Piston Displacement: 475 cu in (7. l) Bore / Stroke: 4.5 in x 4.9 in (115 mm x 125 mm) Air Filtration: Dry element with secondary safety element and in-cab warning indicator. Starting System: 24 V. Batteries: 2 x 12 V. Alternator: 24 V, 50 A SWING SYSTEM Carriage Options: Construction: Recovery Point: Track Shoe Options: Upper and Lower Rollers: Track Adjustment: Track Idler: Track Type: No of Track Guides: No of Lower Rollers: No of Upper Rollers: No of Track Shoes: UNDERCARRIAGE L-Long Carriage Fully welded, X frame type with central bellyguarding and sloping sidemembers with dirt relief holes under top rollers. Front and rear. 24 in (00 mm), 2 in (700 mm), 32 in (00 mm), 34 in (900 mm). Heat treated, sealed and lubricated. Grease cylinder type. Sealed and lubricated, with spring cushioned recoil. Sealed and lubricated. L 2 per side 9 per side 2 per side 50 per side Swing Motor: Swing Brake: Final Drive: Swing Speed: Swing Gear: Swing Lock: Axial piston type. Hydraulic braking plus automatic spring applied disc type parking brake. Planetary reduction. 9.5 rpm Large diameter, internally toothed fully sealed grease bath lubricated. Multi position switchable brake. EXCAVATOR END Monoboom is standard on the JS330 along with a choice of dipper lengths to suit the requirements of reach, dig-depth, loadover height and tearouts. Reserve strength is built into the fully welded structures for hydraulic hammer and other arduous operations. Fabricated bucket tipping links are provided with a choice of lift points. CAB AMS ADVANCED MANAGEMENT SYSTEM Excellent digging, loading and positioning visibility results from the careful design of front, side and roof lights. All screens are tinted to improve in cab conditions. Fully opening front windshield is very smooth to operate and as the lower windshield is stored within the top screen frame it makes complete front screen opening easy, fast and convenient. Fresh air ventilation available from opening door window, opening slot in front windshield and fully opening front windshield. Parallelogram wash wiper for upper windshield ensuring good wiped area for maximum visibility. Wiper motor is fitted in the left hand side of the roof light so as not to affect bucket visibility when loading. Optional lower wiper available. Fresh air ventilation and heater with windshield demister. Infinitely variable blower speed, temperature and recirculation control. Air conditioning incorporating chilled cool box available as option. Fully adjustable deluxe suspension seat with arm rest adjustment and backrest recline. Radio cassette player with digital tuner fitted into the roof lining for maximum protection. Conveniently placed radio mute button incorporated into lower console. 12v power point and mobile phone holder built into the right hand console. Courtesy light can be operated from ground level and is illuminated for five minutes or until switched off improving operator access at night. Cab mounted roller blind protects operator from suns glare through front or top screens. Four selectable working modes link the operators control movements with the engine and hydraulic systems to maximise productivity and efficiency. A (Auto): Up to 0% engine power and 0% flow. Gives variable power and speed depending on the operator s input, matching the demand for output and efficiency to the job. Power boost is automatically activated in this mode should hard conditions be encountered. Auto idle cuts in after a period of inactivity (between 5 and 30 seconds as set by the operator) E (Economy): 0% engine power. 95% of hydraulic flow maximises economy while maintaining excellent output. P (Precision): 55% engine power. 90% of hydraulic flow for fine control of grading operations. L (Lifting): 55% engine power. 3% of hydraulic flow with permanent power boost for maximum lifting power and control. The Auto mode allows the AMS processor to select the optimum operational performance to match the demands of the job while the three alternative modes give precise matching of application when specific tasks are undertaken. The adjustable position monitor mounted on the front right hand pillar of the cab gives the operator a constant read out of mode, tracking range, operating temperature and a host of other information, while retaining excellent visibility of the monitor and the job being carried out. The required flow for hammer applications can be set and stored in the AMS memory and is automatically activated whenever the hammer pedal is depressed.a maintenance indicator warns of imminent service needs, and all servicing and basic checks can be carried out using only the in cab display.
HYDRAULIC SYSTEM A variable flow load sensing system with flow on demand, variable power output and servo operated, multi-function open centre control. Pumps: Main Pumps Maximum Flow Servo Pump Maximum Flow 2 variable displacement axial piston type. 2 x 77 gpm (2 x 290 l/min). Gear type. gpm (30 l/min). Control Valve: A combined four and five spool control valve with auxiliary service spool as standard. When required twin pump flow is combined to boom, dipper and bucket services for greater speed and efficiency. Type: Travel Motors: Final Drive: Service Brake: Park Brake: Gradeability: Travel Speed: Tractive Effort: TRACK DRIVE Fully hydrostatic, three speed with autoshift. Variable swash axial piston type, fully guarded within undercarriage frame. Planetary reduction, bolt-on sprockets. Hydraulic counter balance valve to prevent overspeeding on gradients. Disc type, spring applied, automatic hydraulic release. 70% (35 deg) continuous. High 3 mph (5 km/h). Mid 2.1mph (3.4 km/h). Low 1.5 mph (2.4 km/h). 54,904 lbf (244 kn). Relief Valve Settings: Boom/Arm/Bucket With Power Boost Swing Circuit Travel Circuit Pilot Control 4,27 lbf/sq in (319 bar) 5,047 lbf/sq in (34 bar) 4,01 lbf/sq in (20 bar) 4,712 lbf/sq in (325 bar) 52 lbf/sq in (45 bar) Hydraulic Cylinders: Double acting type, with bolt-up end caps and hardened steel bearing bushes. End cushioning is fitted as standard on boom, dipper and bucket rams. Filtration: The hydraulic components are protected by the highest standard of filtration to ensure long hydraulic fluid and component life. In Tank: 150 micron, suction strainer. Main Return Line: micron, fibreform element. Plexus Bypass Line: 1.5 micron, paper element. Pilot Line: micron, paper element. Hydraulic Hammer Return: micron, reinforced microform element. Cooling: Worldwide cooling is provided via a full return line air blast cooler as part of a single face cooling pack, in conjunction with the engine water cooler.
Excavator: Tracks: Auxiliary: Control Isolation: Engine Speed: Engine Stop: Horn: CONTROLS All servo lever operated to ISO control pattern, independently adjustable to the seat. Individually servo operated by foot pedal or hand lever. Speed selection via joystick button. Via servo operated foot pedal. Via gate lock lever at cab entrance or panel switch. Dial type throttle control plus servo lever mounted one-touch idle control or separate selectable auto-idle with adjustable time delay using AMS. Ignition key operated and seperate shut-down button. Operated via servo lever mounted button. STANDARD EXCAVATING BUCKETS STANDARD / OPTIONAL EQUIPMENT Standard Equipment: Engine fan guard; Cold start pre-heat; Auto engine warm up; Double element air cleaner; Electric refuelling pump; Heavy duty alternator; Electrics isolator; Heavy duty batteries; Cab & engine soundproofing; Cab heater & screen demister; Tinted glass; Interior light; Coat hook; Cigarette lighter; Ashtray; Air conditioning; Operator s storage box; Removable floormat; Windshield wash/wipe; Plug-in power socket; Automatic power boost; Auto-idle; One-touch engine speed control; Hydraulic cushion control; Boom/swing priority switch; Plexus hydraulic oil filtration; HSP pressure test points; Auxiliary pipework mounting brackets; Work lights boom & mainframe mounted; Undercarriage belly guarding; Upper structure under covers; Swing system cover; Twin track guides; External mirrors; Handrail & non slip walk ways; Quick connect engine oil drain pipe; Front screen blind; Quick connect fuel tank drain pipe; Hinged engine under cover. Optional Equipment: Hose burst check valves & overload warning system; Tipping link mounted lift points; General purpose buckets; Ditch/grading buckets; Quickhitch buckets; Hydraulic hammers; Auxiliary pipework (full and low flow); Cab mounted & rear work lights; Rotating beacon; Rain guard; Biodegradeable oil; Air suspension seat with heated pad and lumbar support adjustment; lower screen wiper; Radio & cassette player; Cab protection guarding (FOPS level II). Standard excavating buckets are fully welded, heavy-duty steel with hardened and sealed pivot pins. Maximum Width Capacity (SAE Heaped) in mm cu yd cu m 45 1150 1.54 1.1 55 1400 1.79 1.37 59 1500 1.94 1.49 3 0 2.11 1.1 71 0 2.41 1.5 SERVICE CAPACITIES gal l Fuel Tank 137 51 Engine Coolant 3 Engine Oil 3 Swing Reduction Gear 3. 14.5 Track Reduction Gear (each side) 2.2.5 Hydraulic System 5 320 Hydraulic Tank 40 152 WEIGHTS Equipped with 21 ft 2 in (.45 m) boom, ft 7 in (3.23 m) arm, standard bucket, operator and full fuel tank, 13,230 lb (,300 kg) counterweight. JS JS330 330 LC LC Shoe Width Operating Weight Ground Bearing Pressure 24 in 71,052 lb 9.1 lb f/sq in (00 mm) (32,229 kg) (0.4 kgf/sq cm) 2 in 71,934 lb 7.9 lb f/sq in (700 mm) (32,29 kg) (0.5 kgf/sq cm 31 in 72,1 lb 7.0 lb f/sq in (00 mm) (33,029 kg) (0.49 kgf/sq cm) 35 in 73,9 lb.3 lb f/sq in (900 mm) (33,429 kg) (0.44 kgf/sq cm)
WORKING RANGE Boom Length: 21 ft 2 in (.45 m) Dipper Length 7 ft 3 in (2.2 m) ft 7 in (2.3 m) A Maximum Digging Reach 33 ft 4 in (,170 mm) 34 ft in (,570 mm) A B Maximum Reach on Ground 32 ft in (990 mm) 34 ft 0 in (,370 mm) C Maximum Digging Depth 20 ft 11 in (370 mm) 22 ft 4 in (00 mm) D Maximum Digging Height 31 ft 11 in (9740 mm) 32 ft 9 in (990 mm) B G E Maximum Dumping Height 22 ft 0 in (7 mm) 22 ft in (9 mm) 11 3 F Maximum Vertical Cut Depth 1 ft in (5020 mm) 1 ft 5 in (5 mm) G Minimum Swing Radius 15 ft 3 in (470 mm) 15 ft 3 in (440 mm) Bucket Rotation 14.5 14.5 Dipper Tearout lbf (kgf) 40,350 (1,300) 35,500 (1,0) Dipper Tearout with Boost lbf (kgf) 44,0 (20,000) 3, (17,00) Bucket Tearout 39,470 (17,900) 39,470 (17,900) Bucket Tearout with Boost lbf (kgf) 43,000 (19,500) 43,000 (19,500) 9 7 35 32 30 2 2 24 22 20 Boom Length: 21 ft 2 in (.45 m) Dipper Length ft 7 in (3.23 m) 13 ft 2 in (4.03 m) A Maximum Digging Reach 3 ft in (11,130 mm) 3 ft 11 in (11,0 mm) D E 5 4 1 1 14 12 B Maximum Reach on Ground 35 ft 11 in (,940 mm) 3 ft 4 in (11,0 mm) 3 C Maximum Digging Depth 24 ft 3 in (7390 mm) 2 ft 11 in (190 mm) D Maximum Digging Height 33 ft in (,20 mm) 34 ft 7 in (,550 mm) 2 E Maximum Dumping Height 23 ft 7 in (7190 mm) 24 ft in (740 mm) 1 4 F Maximum Vertical Cut Depth 20 ft in (340 mm) 23 ft 4 in (7120 mm) 2 G Minimum Swing Radius 14 ft in (45 mm) 14ft in (4520 mm) Bucket Rotation 14.5 14.5 Dipper Tearout with Boost lbf (kgf) 32,415 (14,700) 2,225 (12,00) Bucket Tearout with Boost lbf (kgf) 43,000 (19,500) 43,000 (19,500) F 1 2 3 0 2 4 0 C 4 5 7 12 14 1 1 20 22 24 2 25 9 12 11 9 7 5 4 3 2 1 0 Metres Metres Feet 30 2 2 24 22 20 1 1 14 12 1 14 12 4 2 0 Feet
LIFT CAPACITIES Dipper Length: 7 ft 3 in (2.21 m), Boom: 21 ft 2 in (.45 m), Trackshoes: 24 in (00 mm) Triple Grouser. Reach from Swing Center Load Point 5 ft (1.5 m) ft (3 m) 15 ft (4.5 m) 20 ft ( m) 25 ft (7.5 m) 30 ft (9.1 m) Max Reach Height lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) ft (m) 25 ft (7.5 m) 19,050* (40*) 19,050* (40*) 19,020* (25*) 1,30 (325) @21.0 (.4) 20 ft ( m) 19,520* (55*) 19,520* (55*) 1,190* (250*) 14,0 (354) @24.5 (7.5) 15 ft (4.5 m) 27,20* (12,40*) 27,20* (12,40*) 21,40* (9735*) 1,0 (45) 1,470* (375*) 13,290 (030) 17,0 (020) 11,90 (5425) @2.75 (.1) ft (3 m) 23,790* (,790*) 17, (795) 19,130 (75) 12, (5) 1,290 (7390),950 (495) @27.75 (.4) 5 ft (1.5 m) 25,470* (11,555*) 1,790 (715) 1,0 (45) 12,30 (515) 15,90 (7205), (4) @2.0 (.5) 0 ft 34,200* (15,5*) 24,0 (11,195) 25,40 (11,555) 1,30 (7420) 1,370 (330) 12,120 (5495) 1,370 (7425),0 (4935) @27.25 (.3) 5 ft ( 1.5 m) 31,90* (14,375*) 24, (11,195) 24,590* (11,155*) 1,300 (7395) 1,30 (335) 12,130 (5500) 1,030 () 11,920 (5405) @25.25 (7.7) ft ( 3 m) 32,30* (14,0*) 32,30* (14,0*) 27,190* (12,335*) 25,20 (11,455) 21,1* (9575*) 1, (7535) 1,020* (175*) 14,400 (530) @22.25 (.) 15 ft ( 4.5 m) 1,40* (455*) 1,40* (455*) 15,00* (7075*) 15,00* (7075*) @17.50 (5.3) 20 ft ( m) LIFT CAPACITIES Dipper Length: ft in (2.3 m), Boom: 21 ft 2 in (.45 m), Trackshoes: 24 in (00 mm) Triple Grouser. Reach from Swing Center Load Point 5 ft (1.5 m) ft (3 m) 15 ft (4.5 m) 20 ft ( m) 25 ft (7.5 m) 30 ft (9.1 m) Max Reach Height lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) ft (m) 25 ft (7.5 m) 17,30* (7995*) 1,330 (7405) @ 22.75 (.9) 20 ft ( m) 1,50* (420*) 1,50* (420*) 17,130* (7770*) 13,00 (20) 17,050* (7735*) 12,0 (540) @ 2.0 (7.9) 15 ft (4.5 m) 2,300* (11,930*) 2,300* (11,930*) 20,30* (930*) 1,990 (315) 17,30* (05*) 13,40 (115) 1,450 (740) 11,150 (5055) @ 2.0 (.5) ft (3 m) 31,0* (14,40*) 2,30 (12,170) 23,140* (,495*) 17,9 (125) 1,970* (05*) 12,970 (550) 15,20 (920),20 (40) @29.0 (.9) 5 ft (1.5 m) 34,70* (15,725*) 25,200 (11,430) 25,120* (11,395*) 1,990 (7705) 1,70 (520) 12,40 (50) 14,900 (70) 9970 (4520) @ 29.25 (.9) 0 ft 34,900* (15,30*) 24,0 (11,194) 25,00 (1,1) 1,450 (740) 1,420 (355) 12, (5515) 15,300 (940),190 (420) @ 2.5 (.7) 5 ft ( 1.5 m) 2,930* (12,215*) 2,930* (12,215*) 32,9* (14,925*) 24,700 (11,205) 25,1* (11,390*) 1,290 (7390) 1,320 (3) 12,070 (5475) 1,50 (7550) 11,050 (50) @ 2.75 (.2) ft ( 3 m) 3,00* (1,00*) 3,00* (1,00*) 29,000* (13,155*) 25,090 (11,30) 22,400* (,*) 1,490 (740) 17,530* (7950*) 13,020 (5905) @ 24.0 (7.3) 15 ft ( 4.5 m) 21,* (990*) 21,* (990*) 1,140* (7320*) 1,140* (7320*) @19.5 (5.9) 20 ft ( m) Lift Capacity Front and Rear Lift Capacity Full Circle Notes: 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 57, that is: 75% of minimum tipping load or 7% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer.
LIFT CAPACITIES Dipper Length: ft 7 in (3.23 m), Boom: 21 ft 2 in (.45 m), Trackshoes: 24 in (00 mm) Triple Grouser. Reach from Swing Center Load Point 5 ft (1.5 m) ft (3 m) 15 ft (4.5 m) 20 ft ( m) 25 ft (7.5 m) 30 ft (9.1 m) Max Reach Height lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) ft (m) 25 ft (7.5 m) 12,30* (505*) 12,30* (505*) 12,300* (550*) 12,300* (550*) @25.0 (7.) 20 ft ( m) 15,00* (715*) 14,040 (370) 11,* (5355*) 11,40 (5200) @2.0 (.5) 15 ft (4.5 m) 19,150* (5*) 19,150* (5*) 1,740* (7593*) 13, (175) 11,00* (5350*) 070 (455) @30.0 (9.1) ft (3 m) 29,520* (13,390*) 27,540 (12,490) 21,0* (9915*) 1,120 (220) 1,00* (200*) 13,030 (59) 14,570 () 920 (4455) 12,* (5525*) 9330 (4235) @31.0 (9.4) 5 ft (1.5 m) 33,70* (15,315*) 22,50 (11,595) 24,230* (,990*) 17,090 (7750) 1,70 (520) 12,470 (555) 14,20 (475) 9550 (4330) 12,990* (590*) 9050 (45) @31.0 (9.5) 0 ft 35,020* (15,5*) 24,50 (11,) 25,520* (11,575*) 1,400 (7440) 1,320 (3) 12,00 (5470) 14,00 (35) 9350 (4240) 13,30 (275) 9200 (4175) @30.25 (9.3) 5 ft ( 1.5 m) 2,5* (12,025*) 2,5* (12,025*) 33,970* (15,4*) 24,440 (11,05) 25,2* (11,435*) 1,0 (7300) 1,0 (2) 11,0 (530) 14,0 (740) 940 (445) @2.75 (.) ft ( 3 m) 41,* (1,75*) 41,* (1,75*) 30,920* (15,4*) 25,20 (11,) 23,550* (,0*) 1, (7330) 17,940* (140*) 11,90 (5425) 1,550* (7505*) 11,300 (5125) @2.25 (.0) 15 ft ( 4.5 m) 32,00* (14,75*) 32,00* (14,75*) 25,170* (11,415*) 25,170* (11,415*) 1,70* (50*) 1,30 (7545) 15,90* (7250*) 14,50 (15) @22.25 (.7) 20 ft ( m) LIFT CAPACITIES Dipper Length: 13 ft 2 in (4.03 m), Boom: 21 ft 2 in (.45 m), Trackshoes: 24 in (00 mm) Triple Grouser. Reach from Swing Center Load Point 5 ft (1.5 m) ft (3 m) 15 ft (4.5 m) 20 ft ( m) 25 ft (7.5 m) 30 ft (9.1 m) Max Reach Height lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) ft (m) 25 ft (7.5 m),00* (4570*),00* (4570*) @2.0 (.5) 20 ft ( m) 14,270* (470*) 14,270* (470*) 11,00* (5350*),550 (475) 970* (4435*) 970* (4435*) @30.75 (9.3) 15 ft (4.5 m) 15,440* (7005*) 14,050 (370) 14,330* (500*),390 (47) 900* (4445*) 9030 (4095) @32.5 (9.9) ft (3 m) 2,500* (12,020*) 2,500* (12,020*) 20,240* (9*) 1,790 (525) 17,000* (77*) 13,420 (05) 14,0 (740),070 (455),120* (4590*) 430 (325) @33.25 (.1) 5 ft (1.5 m) 31,00* (14,425*) 2,50 (12,055) 23,070* (,45*) 17,20 (7990) 1,570* (425*) 12,70 (5795) 14,490 (570) 9730 (4413),740* (470*) 190 (3715) @33.5 (.2) 0 ft 1,40* (740*) 1,40* (740*) 34,590* (15,90*) 25,140 (11,405) 25,000* (11,340*) 1,370 (7590) 1,540 (4) 12,250 (5555) 14,170 (35) 9430 (4275) 11,770* (5340*) 270 (3750) @32.75 (.0) 5 ft ( 1.5 m) 1,30* (7420*) 1,30* (7420*) 25,050* (11,30*) 25,050* (11,30*) 34,0* (15,*) 24,550 (11,135) 25,30 (11,5) 1,230 (730) 1, (245) 11,920 (5405) 14,000 (350) 9270 (4205) 13,170 (5975) 740 (395) @31.25 (9.) ft ( 3 m) 25,0* (11,40*) 25,0* (11,40*) 35,970* (1,315*) 35,970* (1,315*) 33,020* (14,975*) 24,5 (11,115) 24,750* (11,225*) 1,0 (7300) 1,090 (205) 11,40 (5370) 14,750 (90) 9770 (4430) @29.0 (.) 15 ft ( 4.5 m) 3,730* (1,0*) 3,730* (1,0*) 39,7* (1,015*) 39,7* (1,015*) 2,50* (13,05*) 24,9 (11,300) 21,00* (990*) 1,320 (7400) 1,040* (7275*) 12,1 (5495) 15,50* (705*) 11,900 (5395) @25.25 (7.7) 20 ft ( m) 27,70* (12,00*) 27,70* (12,00*) 20,40* (9450*) 20,40* (9450*) 14,530* (590*) 14,530* (590*) @20.0 (.0) Lift Capacity Front and Rear Lift Capacity Full Circle Notes: 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 57, that is: 75% of minimum tipping load or 7% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer.
A GLOBAL COMMITMENT TO QUALITY JCB s total commitment to its products and customers has helped it grow from a one-man business into one of the world s largest manufacturers of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in the world. By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become renowned all over the world for performance, value and reliability. And with an extensive dealer sales and service network in over 150 countries, we aim to deliver the best customer support in the industry. Through setting the standards by which others are judged, JCB has become one of the world s most impressive success stories. JCB Headquarters Savannah, 2000 Bamford Blvd, Savannah, GA 31322 Tel: (912) 447-2000 Fax: (912) 447-2299 www.jcbna.com JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. DWUSA 3243 05/13