Modular clamping equipment Tt pag. T range and accessories Tg. 6 pag.. 7 Tt-X pag.. 8 S-Tt pag.. 9 xtension element Tt pag.. 1 omplete extension element Tt pag.. 18 Accessories T pag.. 13 ase with fixed support Tt pag.. 14 MVS-Tt pag.. 16. 14 VS-Tt pag. pag.. 13 ase with double support whit jaws pag. ouble support with jaws T. 1 VS-Tt pag.. 19 Spare parts T pag.. 5.1
T is... Modular We use the true definition of the term modular; product which is composed of separate or separable elements. With these separate or separable elements we can achieve many different clamping solutions. The only different component of these clamping solutions is the base. The base length determines the clamping capacity while all other components remain the same. Fixed and movable vise jaws can be used with any base configuration, offering the most flexible workholding solutions available. This modular system allows the user to realize the maximum number of workholding combinations with the minimum investment in equipment. Precision All sliding and joining surfaces are precision ground. ach item is thoroughly inspected and tested both before and after assembly. This rigid quality control allows us to offer the high tolerance levels shown on page 47. Alignment of the clamping equipment is ensured by using high tolerance ground keys. Other key dimensions are available upon request. The clamping jaws pull the workpiece down 0.. (0.008 ) against the ground base for unmatched accuracy. urability All components are constructed from oversize steel profiles ensuring the equipment is exceptionally sturdy and can provide the user with optimal performance. Wear parts are special treated to achieve a surface hardness of /60 HR. All non-ground surfaces are burnished to protect against corrosion. Quick-change A patented system allows quick repositioning of the clamping jaws. The clamping jaw is lifted slightly from the base and shuttled to the next clamping position then lowered into place. Part changeovers and size changes can be made quickly and easely. Reliable The six bolts mounting the fixed jaw to the base provide the most rigid platform possible to support the clamped workpiece. Versatility The fixed jaw has serrations on the rare face so that by reversing it, unmachined workpieces can be clamped. The movable jaw can be rigid or floating (for clamping on uneven surfaces). The interchangeability of the rigid slide-way with the floating slide-way ( both encluded as standard equipment) allows the user to clamp finished or raw workpieces. The standard AK system allows the quick-change of parallels, angular parallels, soft jaws and V jaws in order to machine any workpiece. Manageable The weight of 7 kg (59 lb.) for the. x. (6 x 8 ) vise and simple clamping system allow for easy movement from one machine tool to another..
The advantages of modularity + = Pag..6 Pag..1 + = Pag..6 Pag..13 + = Pag..9 Pag..6 + = Pag..6 Pag..1 + = Pag..6 Pag..17 + = Pag..16 + = Pag..6 Pag. 4.6 + = Start Add ombine Remove Result. 3
Floating slide - way raw workpieces Rigid skide-way for finished workpiece lock for clamping screw with threated anti-friction bronze bushing Patended system for quick positioning over for protection the screw Wrench Options: Torque wrench ase Grinding holes for the clamping on a grid system Tg jaws with threated holes for a contrast prop P A s. 4
Fixed support turned of 180 (grooved part) Pull down jaws 0,0 AK fitting ye bolt for lifting) 6 bolts for the fixed support Work stop ross key for T-slots M.T. arallels, ngulars parallels, oft jaws quick change. 5
Tt clamping equipment (for T slots) lamping equipment Tt complete with wrench, work stop, rigid slide way, floating slide-way (for raw workpiece), pair of positioning keys, pair of AK parallels, cover for the protection of the screw, eye bolt for lifting, wooden packing case. O A S G H7 ø H P F I M N type A F G H I M N O P S Weight kg 77 58 01 01 Tt 110 x 100 100 78 80-1 9 338 110 80 110 10 63 18 38 11,5 77 58 01 0 Tt 110 x 78 80 100 100 1 9 388 110 330 110 10 63 18 38 1,5 77 58 0 01 Tt x 98 114-18 1,5 481 413 13 85 30 48 7 77 58 0 0 Tt x 98 114 100 18 1,5 531 463 13 85 30 48 9 77 58 0 03 Tt x 98 114 100 100 18 1,5 588 50 13 85 30 48 31,5 77 58 03 01 Tt x 70 138 149 18 1,5 647 560 15,5 13 7 68 74 77 58 03 0 77 58 03 03 Tt x 70 138 149 18 1,5 697 610 15,5 13 7 68 78 Tt x 0 0 70 138 149 18 1,5 797 710 15,5 13 7 68 86. 6
clamping equipment (for grid) Tg lamping equipment Tg complete with wrench, work stop, rigid slide way, floating slide-way (for raw workpiece), pair of AK parallels, cover for the protection of the screw, eye bolt for lifting, wooden packing case. O A S P F ø H I ø 16 H7 M N type A F H I M N O P S Weight kg 77 58 01 07 Tg 110 x 100 100 78 80-9 338 110 80 110 10 63 18 38 11,5 77 58 01 08 Tg 110 x 78 80-9 388 110 330 110 10 63 18 38 1,5 77 58 0 07 Tg x 98 114-1,5 481 413 13 85 30 48 7 77 58 0 08 Tg x 98 114-1,5 531 463 13 85 30 48 9 77 58 03 07 Tg x 70 138 149 1,5 647 560 15,5 13 7 68 74 77 58 03 08 Tg x 70 138 149 0 1,5 697 610 15,5 13 7 68 78 * Other fixing and positioning holes dimensions upon request. 7
Tt - X clamping equipment (for T slots) lamping equipment Tt-X, complete with wrench, work stop, rigid slide-way, floating slide-way (for raw workpiece), pair of positioning keys, pair of AK parallels, cover for the protection of the screw, eye bolt for lifting, wooden packing case. O A S G H7 ø H G H7 F F M P I N type A 77 58 01 04 Tt-X 110 x 45 45 78 100 F 100 G 1 H 9 I 658 110 600 M 110 N 10 O 63 P 38 S 38 Weight kg 18, 77 58 0 04 Tt-X x 545 545 98 379 100 18 1,5 85 758 13 85 95 48 77 58 0 05 Tt-X x 665 665 98 439 100 18 1,5 946 878 13 85 355 48 44,7. 8
ouble clamping equipment S-Tt ouble clamping equipment S-Tt complete with: 1 wrench, work stops, rigid slide-ways, floating slide-ways (for raw workpiece), 1 pair of positioning keys, pair of AK parallels, covers for the protection of the screw, eye bolts for lifting, wooden packing case. A T A S G H7 øh F F I G H7 M N A F G H I M N S T Weight kg 77 58 11 01 S-Tt 110 x 130 130 78 80-1 9 676 110 560 110 10 38 80 77 58 11 0 S-Tt 110 x 180 77 58 1 01 S-Tt x 30 77 58 1 0 S-Tt x 80 77 58 13 01 S-Tt x 80 77 58 13 0 S-Tt x 330 180 30 80 80 330 70 70 78 98 98 138 138 80 116 116 100 100 100-1 18 18 18 18 9 1,5 1,5 1,5 1,5 776 966 1066 194 1394 110 660 830 930 11 1 110 10 13 13 15,5 15,5 38 48 48 68 68 80 108 108 194 194 4 5 56 136 144 Working examples: The modularity of the system combined with some other components offers many additional clamping solutions. + =. 9
Operating instruction lamping the workpiece For controlled clamping and the best repetibility use of a torque wrench is recoended: 1 clamp the workpiece with the torque wrench at the necessary clamping force in accordance with the following diagram Zero set on the workpiece 3 Machine the first workpiece 4 lamp the other workpieces at the same clamping force F (da N) 6000 00 00 0 0 0 T110 T T T 0 1 1000 8 6 0 aw alignement 10 0 30 60 70 80 90 100 When it is necessary to replace the jaws in order to ensure the best part pull-down, we recoended the following steps: 110 10 130 1 M (Nm) 0.00 1) make sure the jaws are properly secured to the support. 0.0 ) loosen the adjustment screws until the jaws are backed off about 0.. (0.008 ) tighten the lock nuts located on the back side of the support in the opposite direction of the adjustment screws. 10
manufacturing tolerances How to clamp the vises at the table of the machine tool. In order to obtain a perfect clamping of the workpiece and in order to obtain the tolerances of which point " " is necessary to clamp the vise on the table of the machine tool by means of the ORIGINA OM'S AMPS ( x cod. 795 see drawing n. 1 ). Or by means of the T-nuts ( 595 see drawing n. ) draw. N. 1 draw. N. A S + 0,01 P + 0,05 0.01/100 < 90 F 0.0/100 MAX 0.0/100. 11
T clamping moduls Tt extension element with pair of positioning keys N S G H7 øh M G H7 58 01 17 00 58 0 17 00 58 03 17 00 G H M N S Weight kg Tt 110 x 81 1 9 16 110 10 38 3,5 Tt x 114 75 18 1,5 8 13 48 9 Tt x 100 18 1,5 15,5 68 Working examples: The modularity of the system combined with some other components offers many additional clamping solutions. + =. 1
clamping moduls T double fixed support with jaw T T G h7 58 11 7 10 58 1 7 10 58 13 7 10 G T Weight kg 8 110 80, T x 1 108 5 70 14 194 11,6 Tt complete extension element with pair of positioning keys h6 (by choice) A S N G H7 I øh M G H7 58 01 71 10 58 0 71 10 58 03 71 10 A G H I M N S Weight kg Tt 110 x 60 78 81 1 9 0 110 16 110 10 38 6, Tt x 100 98 114 75 18 1,5 95 8 13 48 15,1 Tt x 10 70 138 100 18 1,5 390 15,5 68 39,. 13
T clamping moduls T base with fixed support with jaw complete with pair of positioning keys h6 (by choice) O A N S G H7 M Ø H 58 01 70 10 58 0 70 10 58 03 70 10 A G H M N O S Weight kg Tt 110 58 78 80 1 9 110 10 110 10 63 38 4 Tt 81 98 114 75 18 1,5 165 13 85 48 9 Tt 8 70 138 149 100 18 1,5 05 15,5 13 68 8 T base with double fixed support with jaw complete with pair of positioning keys h6 (by choice) T N S G H7 øh M G H7 58 11 70 10 58 1 70 10 58 13 70 10 G H M N S T Weight kg Tt 110 x 78 81 1 9 110 16 110 10 38 80 5,6 Tt x 98 114 75 18 1,5 8 13 48 108 13,5 Tt x 70 138 100 18 1,5 15,5 68 194 34,7. 14
clamping moduls Working examples T xamples: Number of pieces ode number 1 58 01 70 10 1 1 58 01 70 10 58 01 71 10 1 58 11 70 10 58 01 71 10 58 01 70 10 58 01 71 10 1 1 58 01 71 10 58 01 70 10 4 4 58 01 70 10 58 01 71 10. 15
MVS-Tt modular vertical clamping systems Vertical clamping system complete with: 4 clamping equipment Tt 1 column 1 base for vertical system Tt 4 pair of AK parallels 4 covers for protection of the screws 4 rigid slide-ways 4 floating slide-ways (for raw workpieces) 4 work stops 4 wrenches eye bolt for lifting, wooden packing case F A I H A F H I Weight kg 77 58 1 11 Tt 110 x 100 100 110 186 13 391 0 110 108 77 58 1 1 Tt 110 x 110 186 13 391 4 110 11 77 58 1 Tt x 46 151 5 0 55 77 58 Tt x 46 151 600 0 63 77 58 3 Tt x 46 151 655 0 73 77 58 31 77 58 3 Tt x Tt x 46 46 151 151 5 600 0 0 8 90 77 58 33 Tt x 46 151 655 0 77 58 3 31 Tt x 70 336 173 661 700 0 565 77 58 3 3 Tt x 70 336 173 661 7 0 The modularity of the system combined with same other components offers many additional clamping solutions. + =. 16
modular vertical clamping systems MVS-T 58 1 80 10 58 80 0 58 80 30 58 3 80 30 type T 110 T T T 0 0 0 110 55 75 75 1 0 5 5 5 F 15 80 100 100 H 391 661 15 18 18 18 M 1 16 16 16 N 13 17 17 17 P 5 Weight kg 57 14 169 66 Insert for vertical use 58 1 33 00 58 33 00 58 3 33 00 T x. 17
VS-Tt modular vertical clamping systems Vertical clamping system complete with: 4 clamping equipment Tt 1 cross cube 4 pair of AK parallels 4 covers for protection of the screws 4 rigid slide-ways 4 floating slide-ways (for raw workpieces) 4 work stops 4 wrenches eye bolt for lifting wooden packing case I H F A M A F H I M Weight kg 77 58 51 11 Tt 110 x 100 100 10 86 114 38 390 110 366 11 77 58 51 1 Tt 110 x 10 86 114 38 4 110 366 15 77 58 5 1 Tt x 396 145 545 0 496 30 77 58 5 Tt x 396 145 595 0 496 38 77 58 5 3 Tt x 396 145 65 0 496 338 77 58 5 31 77 58 5 3 Tt x Tt x 396 396 145 145 545 595 0 0 496 496 348 356 77 58 5 33 Tt x 396 145 65 0 496 366 77 58 53 31 Tt x 70 3 486 18 670 710 630 66 601 77 58 53 4 Tt x 70 3 486 45 18 670 760 630 66 675 Working examples:. 18
modular vertical double clamping systems Vertical clamping system complete with: 4 double clamping equipment Tt 1 cross cube X 8 pair of AK parallels 8 covers for protection of the screws 8 rigid slide-ways VS-Tt 8 floating slide-ways (for raw workpieces) 8 work stops 8 wrenches 8 inserts for vertical use eye bolt for lifting wooden packing case M F A T A G I A F G I M T Weight kg 77 58 61 01 VS-Tt 110 x 155 155 0 476 430 6 75 110 0 556 80 35 77 58 6 01 VS-Tt x 195 195 5 646 45 515 795 890 630 746 108 647 + =. 19
VS-Tt vertical clamping systems ross cube for VS-Tt H Weight kg 58 51 80 10 Tt 110 10 38 75 58 5 80 0 Tt 0 1 58 5 80 30 Tt 0 58 53 80 30 Tt 3 670 0 305 58 53 80 Tt 3 45 670 630 363 ross cube for VS-Tt H H 58 61 80 00 58 6 80 00 H Weight kg VS-Tt 110 x 0 690 0 66 VS-Tt x 5 45 8 630 458 Insert for vertical use cod. 58 1 33 00 58 33 00 58 3 33 00 VS-Tt 110 x VS-Tt x VS-Tt x. 0
accessories fot T clamping equipment Pair of V jaws T A ø MIN ø MAX G h7 ø MIN ø MAX 58 01 00 58 0 00 58 03 00 A G ø MIN ø MAX Weight kg 63 38 56 4 8 110 10 4 3,1 T x 85 48 75 5 1 15 38 7, 13 68 110 5 14 0 48 1,5 Pair of grooved jaws 58 01 44 09 58 0 44 09 58 03 44 09 type T x Insert for vertical use (MVS,VS,VS) 58 1 33 00 58 33 00 58 3 33 00 T x Torque wrench cod. type 51 10 01 51 10 0 T x 51 10 03. 1
T accessories for T clamping equipment Air/oil block complete with cylinder and tang 58 01 75 00 58 0 75 00 58 03 75 00 T x Air/oil foot pump with joining pipe cm 180 (71 ) and complete block for air/oll application. 77 58 01 51 77 58 0 51 77 58 03 51 T x Air/oil foot pump 71 66 03 05 71 66 03 05 T x 71 66 03 05 Air/oil manual pump 71 66 03 15 71 66 03 15 T x 71 66 03 15 Pressure-gauge 51 43 1 51 51 43 1 51 T x 51 43 1 51.
accessories for T clamping equipment oining pipe M. 1,80 (71 ) T type 71 70 87 13 71 70 87 13 T x 71 70 87 13 oining pipe M. 3 (118 ) cod. 71 70 87 14 T - 110 71 70 87 14 T - 71 70 87 14 T - oining pipe M. 6 (36 ) 71 70 87 15 71 70 87 15 71 70 87 15 type T x Pair of clamps complete with screws and T nuts T 1 58 01 7 9 58 0 7 9 58 03 7 9 ode for T-slots 14 16 18 0 58 01 7 93 58 01 7 94 58 01 7 95 58 01 7 96 58 01 7 97 58 0 7 93 58 0 7 94 58 0 7 95 58 0 7 96 58 0 7 97 58 03 7 93 58 03 7 94 58 03 7 95 58 03 7 96 58 03 7 97 Tt 110 x Tt x Tt x. 3
T accessories for T clamping equipment Pair of T nuts omplete with screws at 45 T 1 58 01 5 9 58 0 5 9 58 03 5 9 ode for T-slots 14 16 18 0 58 01 5 93 58 01 5 94 58 01 5 95 58 01 5 96 58 01 5 97 58 0 5 93 58 0 5 94 58 0 5 95 58 0 5 96 58 0 5 97 58 03 5 93 58 03 5 94 58 03 5 95 58 03 5 96 58 03 5 97 Tt 110 x Tt x Tt x Pair of positioning keys with special dimensions T h6 1-58 0 13 9 58 0 13 9 ode for T-slots 14 16 18 0 58 01 13 93 58 01 13 94 58 01 13 95 58 01 13 96 58 01 13 97 58 0 13 93 58 0 13 94-58 0 13 96 58 0 13 97 58 0 13 93 58 0 13 94-58 0 13 96 58 0 13 97 Tt 110 x Tt x Tt x. 4
spare parts for T clamping equipment T 91 9 90 93 04 03 09 1 94 10 08 0 07 14 98 05 06 96 11 95 01 8 13 35 97 84 19 83 escription 01...ase 0...Fixed support 03... Moveable support 04... aw 05... Floating slide-way 06...Rigid slide-way 07...Fixed slide-way 08...lamping screws 09...ronze bushing 10...ontrast pin 11... Positioning plate 1...lock for clamping screw 13...Positioning key 14... Key for support 19... Wrench 8...over for protection of the screw 35...Pair of AK parallels... Work stop 83... Wooden packing case 84... ye bolt 90... Rubber pad 91... Screw TI 9... Screw TI 93... Screw TI 94... Screw TPS 95... Screw TPS 96... Screw TPS 97... Screw TI 98... Screw TI. 5
T spare parts for T clamping equipment Pair of smooth jaws 58 01 04 09 58 0 04 09 T x 58 03 04 09 58 04 04 09 T x Fixed support with jaw 58 01 7 10 58 0 7 10 58 03 7 10 58 04 7 10 T x T x Moveable support with jaw 58 01 73 10 58 0 73 10 58 03 73 10 58 04 73 10 T x T x Floating slide-way 58 01 05 00 58 0 05 00 58 03 05 00 58 04 05 00 T x T x Rigid slide-way 58 01 06 00 58 0 06 00 58 03 06 00 58 04 06 00 T x T x Fixed slide-way 58 01 07 00 58 0 07 00 58 04 07 00 T x T x. 6
spare parts for T clamping equipment T Pair of keys for fixed suport 58 01 04 09 58 0 04 09 T x 58 03 04 09 58 04 04 09 T x Wrench 58 01 19 00 58 0 19 00 58 03 19 00 58 03 19 00 T x T x omplete clamping block (old type) 58 01 74 10 58 0 74 10 58 03 74 10 58 04 74 10 T x T x omplete clamping block (new type) 58 01 74 11 58 0 74 11 58 03 74 11 T x lock for clamping screw (old type) 58 01 1 10 58 0 1 10 58 03 1 10 58 04 1 10 T x T x lock for clamping screw (new type) 58 01 1 1 58 0 1 1 58 03 1 1 T x. 7
T spare parts for T clamping equipment lamping screw (old type) 58 01 08 10 58 0 08 10 58 03 08 10 58 03 08 10 T x T x lamping screw (new type) 58 01 08 1 58 03 08 1 T x 58 03 08 1 ronze bushing (old type) 58 01 09 00 58 0 09 00 58 03 09 00 58 03 09 00 T x T x ontrast pin (old type) 58 01 10 00 58 0 10 00 58 03 10 00 58 04 10 00 T x T x ontrast pin (new type) 58 01 10 01 58 0 10 01 T x 58 03 10 01 Positioning plate (old type) 58 01 11 10 58 0 11 10 58 03 11 10 58 04 11 10 T x T x. 8
spare parts for T clamping equipment Positioning plate (new type) T 58 01 11 11 58 0 11 11 T x 58 03 11 11 Pair of standard positioning keys T h6 58 01 13 9 Tt - 110 T h6 58 0 13 95 Tt - 18 58 0 13 95 Tt - 18 58 0 13 95 Tt - 18 1 Work stop 58 01 00 58 0 00 58 03 00 58 03 00 T x T x over for protection of the screw 58 01 8 10 58 0 8 10 58 03 8 10 58 04 8 10 T x T x ck for cylinder 58 01 1 0 58 0 1 0 58 03 1 0 T x. 9
T spare parts for T clamping equipment Tang for cylinder 58 01 16 00 58 0 16 00 58 03 16 00 T x an of oil 10 7 99 10 7 99 T x 10 7 99. 30