POSTURE SEAT MaTRx PS cushion is designed to provide superior positioning, stability and comfort. The design features an anatomically contoured shape with a unique waffled ischial relief recess, and an innovative reversible outer cover. REVERSIBLE OUTER COVER: >Innovative reversible outer cover may be used smooth or fabric side out >Dartex fabric is moisture resistant and breathable >Velcro strips CUSHION: >Durable HR (high resilient) foam prevents bottoming out >Anatomically molded shape for optimal positioning and comfort >Rear radius for sacral support >Waterfall front edge >Made with Ultra-Fresh for antibacterial and odor protection INNER COVER: >Moisture resistant >Easily wiped clean ISCHIAL RELIEF AREA: >Waffled recess provides immersion of bony prominences >Helps maintain pelvic position and prevent sliding STANDARD SIZES width 16" 18" 20" depth 16" 18" 20" Approximate Cushion weight is 2 lbs >CUSTOM MODIFICATIONS >CUSHION RIGIDIZER >PELVIC OBLIQUITY KIT >Leg length discrepancies, width/depth reductions >Foam, inner and outer covers modified to your specifications >Lightweight, slim profile solid seat insert >Contoured to eliminate hammock effect of sling upholstery >Easily installed on MaTRx PS cushions >Accommodates ½" or 1" obliquities >Must be specified at the time of order - cushion modification required
MaTRx-Vi cushion is designed to provide skin protection and positioning for users at moderate to high risk of skin breakdown. The unique 3 part foam construction targets skin protection to where it is needed most, and features improved stability, support and comfort. OUTER COVER: >Moisture resistant and breathable >Includes non-slip base, Velcro strips, lifting strap and convenient side pocket >Available in black or Kid*ab*ra print TOP LAYER: >Soft (ILD) High Resilient (HR) foam for optimal comfort and support >Pre-ischial contour provides stability to pelvis >Abductor/adductor contour promotes midline leg positioning >Made with Ultra-Fresh for antibacterial and odor protection INNER COVER: >Moisture resistant >Easily wiped clean >Zippered cover allows access for cushion modifications VISCO FOAM INSERT: >Molded visco-elastic foam ischial relief insert >Anatomically targeted to provide immersion of sensitive bony prominences BOTTOM LAYER: >Firm (ILD) High Resilient (HR) foam for support and durability >Trochanteric shelf provides stability to hips >Waterfall front edge >Rear radius for sacral support PEDIATRIC SIZES width 12" 14" depth 12" 14" Weight capacity 150 lbs. Kid*ab*ra fabric standard black fabric optional STANDARD SIZES width 14" 16" 18" 20" 22" depth 15" 16" 17" 18" 19" 20" BARIATRIC (HEAVY DUTY) SIZES width 18" 19" 20" 21" 22" 23" 24" 25" 26" 27" 28" 29" 30" depth 18" 19" 20" 21" 22" 23" 24" 25" 26" Weight capacity 600 lbs. >DROP BASE >PELVIC OBLIQUITY KIT >CUSTOM MODIFICATIONS >DARTEX COVER >CUSHION RIGIDIZER >Includes built-in drop base, drop hooks, DuraClip fasteners >Allows adjustment of seat angle >Easily installed on all MaTRx-Vi /Kid*ab*ra-Vi cushions/bases >Accommodates ½" or 1" obliquities >Leg length discrepancies, width/ depth reductions >Foam, inner and outer covers modified to your specifications >Outer cover available in smooth or fabric side out >Moisture resistant >Lightweight, slim profile solid seat insert >Contoured to eliminate hammock effect of sling upholstery
MaTRx Flo-tech cushion uses a combination of molded foam and dual layer fluid sacs to provide the highest level of skin protection for users with high risk of skin breakdown. The Fit Kit components are available to address individual postural requirements. PLATILON LINER: >An additional layer of moisture protection OUTER COVER: >Moisture resistant and breathable >Includes non-slip base, Velcro strips and a lifting strap >Expandable cover facilitates use with Fit Kit components FOAM BASE: >High quality, comfortable, resilient foam base >Molded in Velcro for secure attachment of Fit Kit components >Pre-ischial contour, trochanteric support, and sacral support FLUID SAC: >Unique dual-layer fluid in ischial/sacral area to help prevent bottoming out >Non temperature sensitive fluid will not freeze >No kneading or maintenance required STANDARD SIZES width 14" 15" 16" 17" 18" 19" 20" depth 14" 16" 17" 18" 19" 20" 21" BARIATRIC (HEAVY DUTY) SIZES width 20" 21" 22" 23" 24" depth 18" 20" 22" Weight capacity 500 lbs. FIT KIT COMPONENTS: PELVIC OBLIQUITY BUILD-UP FLUID SUPPLEMENT >SEAT WEDGES Increases degree of pre-ischial contour angle to help prevent sliding >FLUID SUPPLEMENT May be placed to provide pelvic obliquity accommodation or increased sacral/ischial immersion >HEMI WEDGE May be used to provide increased support to one lower extremity useful for clients who use foot propulsion or with hip flexion limitations >TAPERED WEDGES Accommodates mild pelvic rotation, mild hip flexion discrepancies or increases adductor contour >ABDUCTOR SMALL - Provides ¾" increased of abductor contour LARGE - Provides 2" increased of abductor contour >PELVIC OBLIQUITY BUILD-UP Accommodates obliquities up to 1". For correctable obliquities use under low side of pelvis and for fixed obliquities use under high side of pelvis >ADDUCTORS FRONT - Provides increased adductor contour to thighs REAR - Provides increased adductor contour to hips ADDUCTOR (REAR) ADDUCTOR (FRONT) ABDUCTOR (LARGE) SEAT WEDGES HEMI WEDGE TAPERED WEDGES ABDUCTOR (SMALL)
FOR THE WIDEST RANGE CLIENT NEEDS
MaTRx-PB Posture Back is contoured to provide midline support and positioning. The extensive range of sizes provides exceptional comfort and support for a wide range of user needs. OUTER COVER: >Moisture resistant and breathable >Available in black or Kid*ab*ra print FOAM: >Molded foam wraps around shell for maximum comfort and protection SACRAL/LUMBAR SUPPORT: >Includes removable positioning pad BACK SHELL: >Contoured shell (standard/deep) provides exceptional midline support and positioning >Durable, lightweight ABS back shell includes built-in plate for headrest attachment HARDWARE: > Easy Set hardware is easily installed and adjusted in minutes adjustments can be made while user is seated in the wheelchair >Quick release for easy portability >Infinite adjustment of depth (4"), angle (40 ) and rotation >Fits ¾", 7 /8" and 1" diameter back canes >Adjusts to fit chairs 1" narrower to 1" wider 5" CONTOUR DEPTH-STANDARD 7" CONTOUR DEPTH-DEEP Kid*ab*ra fabric optional STANDARD POSTURE BACK width 14" 16" 17" 18" 20" 12" 16" 20" HEAVY DUTY POSTURE BACK width 20" 22" 24" 16" 20" Weight capacity 500 lbs. EXTRA WIDE POSTURE BACK width 24" 25" 26" 27" 28" 29" 30" 16" 20" Weight capacity 500 lbs. >CANE REPLACEMENTS >FOAM-IN-PLACE KIT >EXTENDED MOUNTING PINS >VISCO FOAM UPGRADE >HEADREST ADAPTER >Replaces existing back canes which are less than 1" diameter for use with any MaTRx back >Individually molded insert produced in minutes with user seated in back >Optional high stretch cover available >Extended mounting pins available for MaTRx-PB & Elite. Not available on Heavy Duty PB backs >Allows the back to fit chairs up to 2" wider >Laminate of ½" high resilient foam and 5 /8" Visco Foam >Available on MaTRx PB and Elite backs >Molded foam is not available on MaTRx PB with this option >Allows the headrest to be mounted directly onto MaTRx Elite backs >Available in 3 sizes
MaTRx PB Elite back is designed to provide precise orientation within the wheelchair for optimal postural support. The attractive, lightweight design appeals to users with active lifestyles. OUTER COVER: >Oversized cover/foam for extra comfort and protection >Moisture resistant and breathable cover (Optional Kid*ab*ra print) >Includes removable lumbar positioning pad BACK SHELL: >Stylish and breathable back shell >Lightweight - most models under 3 lbs HARDWARE: > Easy Set hardware installed and adjusted in minutes adjustments can be made while user is seated in the wheelchair >Quick release for easy portability >Infinite adjustment of depth (4"), angle (40 ) and rotation >Fits ¾", 7 /8" and 1" diameter back canes >Adjusts to fit chairs same width or 1" wider SACRAL/LUMBAR SUPPORT: >Includes removable positioning pad 3" CONTOUR DEPTH short mid tall ELITE BACK width 12" 13" 14" 15" 16" 17" 18" 19" 20" 10" 12" 14" 16" 18" 20" 20" Full Back* * Optional Full back style - no scapular cut-outs >SWING-AWAY >OFFSET SWING-AWAY >LATERAL PADS >FIXED >OFFSET FIXED Extra Small Small Medium Large >2½" of vertical adjustment on back pan >Mount inside back shell without interfering w/depth/angle adjustment >Easy push button release >4 pad sizes: XS, S, M & L >Provides an additional 3" of vertical position (higher or lower) relative to mounting slots >Mount inside back shell without interfering w/depth/angle adjustment >Easy push button release >4 pad sizes: XS, S, M & L >Lateral Pads are available in 4 pad sizes: XS, S, M & L XS: 3.25" high x 4.25" long S: 3.5" high x 5.25" long M: 3.75" high x 5.75" long L: 4.25" high x 6.5" long >2½" of vertical adjustment on back pan >Mount inside back shell without interfering with depth/angle adjustment >Available in standard and pediatric sizes >Provides an additional 3" of vertical position (higher or lower) relative to mounting slots
EASY-SET HARDWARE ADJUSTMENTS DEPTH 4" >2" in front or behind back canes ANGLE ADJUSTMENT >40 range of back angle adjustment ROTATION >Back may be oriented to accommodate pelvic/trunk rotation MOUNTING HARDWARE OPTIONS ❶ ❷ ❸ ❹ ❶❶HEAVY DUTY EASY SET MOUNTING HARDWARE >Standard with Heavy Duty Posture Backs >Recommended for users over 300 lbs, high tone or heavy use ❷❷FIXED SPACE SAVER MOUNTING HARDWARE >Requires tools for removal >Saves space for tighter width applications >Fully adjustable ❸❸SPLIT MOUNTING HARDWARE >Provides clearance of mid back cane rigidizer bars >Not recommended for Heavy Duty Posture backs >Available as a no charge option ❹❹EXTENDED SHEAR REDUCTION MOUNTING HARDWARE >Allows all MaTRx backs to be mounted directly to Motion Concepts TRx seating with Power Recline and ESR
MaTRx Genera back provides support and comfort at a price so affordable that no wheelchair user needs to make do with sling upholstery. GENERA BACK HIGHLIGHTS: >Attractive, water resistant and breathable cover, vinyl backed >Hardware fits ¾", 7 /8" and 1" back canes >Provides 1" depth and 20 recline adjustability >Quick release hardware for easy portability >Sturdy contoured shell, durable plated steel hardware >Built-in T-nuts for headrest attachment >Hardware adjusts to fit chairs 1" wider than back model width STANDARD SIZES width 16" 18" 20" 16" 20" MaTRx High back is a stylish option with a built-in head support - great for tilt/ recline applications CONTOUR BACK MaTRx Contour back provides comfortable back support with a limited amount of adjustability for users with basic positioning needs. HIGH BACK HIGHLIGHTS: >Removable, water resistant, breathable cover >Adjustable lumbar and neck support >Adjustable molded foam lateral wedges >Sacral/lumber pad >Fits 7 /8" or 1" diameter back canes CONTOUR BACK HIGHLIGHTS: >Moisture resistant, breathable cover >Mildly contoured for gentle midline support >Ergonomically contoured aluminum back pan >Fixed hardware on back canes, small range of depth recline adjustment >Fits 7 /8" or 1" diameter back canes STANDARD SIZES width 16" 17" 18" 19" 20" 21" 20" 25" 30" STANDARD SIZES width 15" 16" 17" 18" 19" 20" 21" 22" 12" 15" 17" 21" >PELVIC/THORACIC FIXED LATERAL SUPPORTS >SWINGAWAY LATERAL SUPPORTS >LATERAL PADS >EXTENDED SHEAR REDUCTION MOUNTING HARDWARE >ONYX UPGRADE Small Medium Large >Designed especially for MaTRx Contour or High Backs providing infinite/easy adjustability up and down >3 pad sizes: S, M & L >Designed especially for MaTRx Contour or High backs providing infinite/easy adjustability and obstruction-free transfers >3 pad sizes: S, M & L >Lateral Pads are available in 3 pad sizes: S, M & L S: 3.5" high x 5.25" long M: 3.75" high x 5.75" long L: 4.25" high x 6.5" long >Allows MaTRx backs to be mounted directly to Motion Concepts TRx power seating systems with recline >Faux Leather automotive look >Available on MaTRx Contour back and High back
HEAD SUPPORT HARDWARE OPTIONS >STANDARD HARDWARE >STEALTH WORLD S BEST >MULTI-AXIS HEAD SUPPORT KIT >ONYX AUTO STYLE KIT >Comes standard with Otto Bock, Standard & Stealth Comfort Plus Pads >Upgrade option for Otto Bock, Standard & Stealth Comfort Plus Pads >Dual pivot balls for pad orientation >Depth adjustable through dual link system >Height adjustable >Includes mounting clamp for attachment to back with latch style release for headrest removal >Upgrade option for Otto Bock, Standard & Stealth Comfort Plus pads >Dual pivot balls for pad orientation >Depth adjustable through horizontal slide bar >Height adjustable >Includes mounting clamp for attachment to back with knob style release for headrest removal >Onyx leatherette cover >Auto-style contouring >8" wide x 8" high x 4" thick >Dual pivot ball for pad orientation >Limited adjustability recommended for Contour or High backs >Height adjustable >Includes fixed mount clamp HEAD PAD OPTIONS >OTTO BOCK >STANDARD >STEALTH COMFORT PLUS POSITIONING STRAP OPTIONS >PADDED LAP BELTS >AIR MESH CALF STRAP 2 POINT 4 POINT >Easy to clean self skinning polyurethane foam >Anatomically shaped to provide lateral flexion control >7" wide x 5" high or 9" wide x 6" high >Easy to clean self skinning polyurethane foam >Gentle lateral contouring >6½" wide x 7" high >Soft, comfortable layered foam on coated metal shell >Removable, washable cover >Four pad sizes: 8", 10" or 14" wide x 6" high and 6" wide x 3¾" high >2" wide belts, comfortable padding >Center pull tightening, push release buckle >2 or 4 point attachment >Available in 4 sizes: M, L, MD, LG >For 15" - 18" wide chairs M: 3.5" high MD: 9" high >For 18" - 22" wide chairs L: 3.5" high LG: 9" high ARMPAD OPTIONS >MULTIPOSITION ARM PADS >ERGONOMIC ARM TROUGH/HAND PAD KIT >GEL ARM PADS POSITIONING STRAP OPTIONS >MULTI AXIS ARMREST MOUNT >JOYSTICK MOUNTING BAR FOR MULTI AXIS ARMREST MOUNT >Soft, gel-like feel provides extra comfort and protection for arms >Highly durable skinned polyurethane resists cracking and peeling >Triple track extrusion allows adjustability of mounting position and attachment location for other accessories >3" wide; desk length 10" or full length 12" >Molded, skinned polyurethane fits the natural arm curvature >Unique cut-out at elbow provides users with flexibility of various arm positions >Triple track extrusion allows a variety of mounting positions >Complete with flat hand pad or interfaces with other manufacturer s hand pieces >Fabric covered polymer gel arm pads >Provides extra protection for highly sensitive arms >Available in 3 models: Std. Narrow: 2" wide x 12" long Std. Wide: 3½" wide x 12"long Long Wide :3½" wide x14" long >Allows infinite adjustment of angle and rotation of arm pad >Interfaces with multiposition arm pad >Available for 3 /4" or 7 /8" joystick bar size
MANUFACTURED BY: Motion Concepts 84 Citation Dr., Unit 1-7 Concord, ON L4K 3C1 Toll Free Tel: 1.866.748.7943 Tel: 905.695.0134 Fax: 905.695.0138 DISTRIBUTED IN USA BY: Motion Concepts 700 Ensminger Rd., Suite 112 Tonawanda, NY 14150 Toll Free Tel: 1.888.433.6818 Toll Free Fax: 1.888.433.6834 DISTRIBUTED IN CANADA BY: Invacare Canada 570 Matheson Blvd East, Unit 8 Mississauga, Ontario L4Z 4G4 Toll Free: 800.668.5478 Fax: 905.361.1303 www.invacare.ca DISTRIBUTED BY: Cover Photo: Anita is an inspiration to everyone she meets. Her greatest joy is spending time with her vivacious 2 year old daughter, Olivia and loving husband, Bobby. In her spare time she enjoys visiting with friends, reading, swimming and sailing. Anita is set to complete her Doctorate in Rehabilitation Science and looks forward to continuing to make a difference. www.motionconcepts.com info@motionconcepts.com