GE Lighting Infusion Module NPM Series High intensity accent lighting DATA SHEET Product information The GE Infusion NPM (Narrow Punch Module) Series represents a major breakthrough in LED-based accent lighting, delivering a high intensity, narrow spot beam that brings real drama and impact to retail, galleries, and other display applications. Delivering the inherent benefits of all Infusion modules twist/lock functionality, outstanding reliability and low energy use the NPM Series combines a very high intensity LED source with new proprietary GE optics to deliver its high intensity narrow beams for track mounted, recessed accent lighting and spotlighting. The Infusion NPM system - module and patented optic, with a small light emitting surface directs the light and offers high performance without any compromise in light quality. When run at its maximum power of 25 watts, the Infusion NPM system delivers a peak intensity of up to 30,000 candela, in a narrow 10 degree beam of high quality light. The Infusion NPM system has been developed so that all sizes are compatible with the rest of GE Lighting s Infusion range, and the system features the same twist and fit functionality. This ensures that as LED technology progresses, luminaires can be easily updated. Infusion NPM optics are available in 2 sizes: a 75mm optic with a 12 degree beam and a 100mm optic with a 10 degree beam. The system can also be run at lower drive currents to match the maintained peak beam intensity of traditional sources. Features & Benefits Peak intensities up to 30,000 candela Excellent beam quality and color uniformity 75mm/100mm optics for 12/10 degree beam Max drive current 700mA 2700K, 3000K & 4000K color temperatures >80 and >87 CRI options IEC Standards IEC62471: Photobiological safety of lamps and lamp systems. IEC62031: LED modules for general lighting - safety specification Application areas Retail Museums and Art Galleries
Specification summary Product Code Description Body Color CCT [K] CRI Color Variation (MacAdam Ellipse) Rated Life (L85) [h] 98471 MP30/827/W/N White 2700 > 80 < 4-steps 50,000 98472 MP30/830/W/N White 3000 > 80 < 4-steps 50,000 98473 MP30/930/W/N White 3000 > 87 < 2-steps 50,000 98474 MP30/840/W/N White 4000 > 80 < 4-steps 50,000 Drive Current [ma] Rated Lumens [lm] Rated Watts [W] 700 1300 25 500 1100 18 350 850 12 700 1400 25 500 1150 18 350 900 12 700 1100 25 500 925 18 350 725 12 700 1500 25 500 1275 18 350 975 12 Accessories Infusion NPM modules are available with GE proprietary narrow spot optics for optimal beam intensity and precise, smooth beam control. The optics feature a twist-lock interface for easy, tool-free attachment to the Infusion module. The 75mm optic delivers a 12 beam while the 100mm optic delivers a 10 beam. Infusion TM NPM Optic - 75mm Infusion TM NPM Optic - 100mm Holder Optics Product Code Description Body Color Diameter Length Corresponding Module Series Beam Nominal Beam Angle* [ ] Peak Intensity** [cd] 98478 OP30/SP/100MM/W White 100 71 NPM Narrow Spot 10 30000 98477 OP30/SP/75MM/W White 75 43 NPM Narrow Spot 12 20000 98476 OP30/SP/100MM/B Black 100 71 NPM Narrow Spot 10 30000 98475 OP30/SP/75MM/B Black 75 43 NPM Narrow Spot 12 20000 * Full Width Half Maximum (FWHM) ** Candela values relate to color 830. For other color temperatures see the Beam performance table. Peak intensity values are for module driven at maximum rated drive currents. For values at lower drive currents use lumen ratio in the Specification summary table. Holders Product Code Description Body Color Lead Insulation Lead Length 66233 MHOLDERW/PVC600 White PVC 600 66232 MHOLDERB/PVC600 Black PVC 600 61450 MACC07HOLDERW White None n/a 78835 MACC07HOLDERB Black None n/a Beam performance from Infusion NPM and GE optics Module Series Module Product Code Module CCT [K] Optic Beam Optic Product Code White Optic Product Code Black Peak Intensity* [cd] Nominal Beam Angle** [ ] Nominal Diameter Nominal Length 98471 827 18500 12 75 43 98472 830 20000 12 75 43 NSP 98477 98475 98473 930 15500 12 75 43 98474 840 21000 12 75 43 NPM 98471 827 27500 10 100 71 98472 830 30000 10 100 71 NSP 98478 98476 98473 930 23500 10 100 71 98474 840 32000 10 100 71 * Peak intensity values are for module driven at maximum rated drive currents. For values at lower drive currents contact your GE representative for details. ** Full Width Half Maximum (FWHM) 2
Spectral power distribution NPM 827 NPM 840 NPM 830 NPM 930 Color maintenance 4 step 3000 hr 4 step 3000 hr 4 step CRI maintenance Very stable CRI across all color ratings. Lumen maintenance 3000 hr L70 50,000hr Prediction Unless otherwise stated, color, CRI and lumen maintenance data is based on measurements on production modules with color 830 at nominal driver current and T C = 65 C. Color, CRI and lumen results may vary depending on temperature, application, and drive current. L70 50,000hr Prediction L70 50,000hr Prediction 3
Photometric data Photometric data shown below is for 830 color at max drive current. For different colors see the correction factor table. 827 0.9 840 1.1 930 0.76 Narrow Spot Optics 10 CBCP: 20,000 CBCP: 30,000 Dist. (ft) 5.0 FC 800 Dia. (ft) 1.1 Dist. (ft) 5.0 FC 1200 Dia. (ft) 0.9 7.5 356 1.6 7.5 533 1.3 10.0 200 2.1 10.0 300 1.7 12.5 128 2.6 12.5 192 2.2 15.0 89 3.2 15.0 133 2.6 Three-in-one connectivity Every GE Infusion LED module offers the simplicity and ease of installation that comes with three-in-one connectivity. Twist an Infusion module into place and three key interfaces thermal, electrical and mechanical are connected at once. The printed circuit board (PCB) that carries the LEDs is connected to a thermal interface, which in turn is attached to the main body of the module by a set of springs. The module also has electrical connectors and mechanical tabs enabling all three interfaces to be connected with one single twist action. Front view Rear view LED array MECHANICAL connectors THERMAL interface pad Finger grab (tool-less insertion) OPTICAL Interface Spring loaded compression ribs ELECTRICAL contacts for input power 4
Dimensions Module dimensions Overall dimensions: holder, module, optic 20,45±0,25 9,78±0,13 69,75 + 0,13-0,25 ø75,2 76 MAX ø99,5 100 MAX (5) (10,43 ) (10,8) (18,4 ) (53) 58 59 Max (75,9) 86,7 87 Max (24) (ø65) (24) (ø65) Dimensions for optic designers Optical interface for NPM series 1. 3D Customer Models of the module are simplified versions of detailed solid models. Not all details/features are included in drawing or in models. Geometry in the 3D Customer Models is typically provided in nominal condition and typically does not reflect max/min conditions. 100 2. Height from base to top of lock tab as shown represents compressed distance when mated to holder accessory. This compression is required to make appropriate mechanical, electrical, and thermal connections. This dimension and tolerance is driven by holder. 28,5 9 3. Height from base to top of housing as shown represents compressed condition when mated to holder. 1,97 3,20 4 7,2 4. Multiple lumen level and beam angle solutions are provided within same overall system envelope. 5. Check overall height of system against drawing to confirm proper mating. There is a gap in outer surfaces between the Module and Optic Accessory when properly mated. 6. Ensure bottom diameter of reflector clears the light emitting surface of the module. Using lower diameter reflector may damage the LEDs. 7. Dimensions in parenthesis () are for reference only. 8. Consult GE Lighting for more information. 5
Holder dimensions for heat sink designers 1. 3D Customer Model for holder accessory is provided as a detailed solid model. 2. Geometry in 3D Customer Models is typically provided in nominal condition and may not reflect max/min conditions. Consult this drawing for max/min conditions. 3. Thermal Interface Region indicates where thermal pad attached to thermal base makes contact to heat sink. The region should be smooth, flat, and clean. Non-clean surface can damage thermal pad and result improper thermal contact. Recommend 0.1 mm flatness with surface roughness tolerance of RMS 16 4. Entire mating area beneath OD of holder should be flat with no infringements into this region to allow for any future holder mounting options. 5. Wire connections to solder pads per polarity indicated. Ensure proper strain relief is provided. Solder pads are designed for connection to 20 AWG stranded cable. (20 AWG stranded UL 1007 tinned copper conductor). Consult local codes and standards to ensure use of proper cable. 6. Dimensions in parenthesis () are for reference only. 7. Ensure holder mounting and thermal interface surface are at the same level. Thermal interface surface being at different level can cause either difficult assembly or improper thermal contact. Lumen performance with temperature The operating temperature of the module will impact on lumen output. Claimed lumens assumes a steady-state T C reading of 65 C. Modules operating cooler than this will have higher lumen output, while modules operating at a higher temperature will show a reduction in lumens, as illustrated in this graph. Designing a heat sink % relative lumens T c vs % Relative Lumens 120% 115% 110% 105% 100% 95% 90% 85% 80% 75% 70% 25 35 45 55 65 75 85 T c ( C) The necessary size of the heat sink will depend on the temperature difference between T C and ambient temperature, total input power, and material properties of the heat sink and air flow over heat sink. To ensure that adequate heat is dissipated from the light engine, heat sink design must take into account the input power to the LED module as well as effects from nearby heat sources. Assuming that ambient temperature is 25 C, T C is 65 C, the heat sink is in a free-air condition, and the module is run at nominal current (necessary to achieve the rated lumens) the minimum Rθ hs-a is: Module Series Lumen Value Required Heat Sink Rθ [K/W] NPM 1.65 Notes: Rθ hs-a can generally be reduced by adding heat fin surface area or introducing forced convection via active cooling methods 6
Drivers Infusion NPM modules are compatible with a wide range of GE Lightech and other 3rd party LED drivers, making it simple to specify a driver with the correct input voltage, dimming protocol, and form factor to suit your application. Full phase control dimmable drivers Dimmable with most leading edge (triac) and trailing edge (ELV) dimmers Deep dimming to 1% Wide power range (4-36W) High power factor Efficient Side lead and bottom feed versions culus Recognized, Class 2, 47 CFR Part 15, Class B Trailing edge dimmable drivers Dimmable with trailing edge (ELV) dimmers Dimming to 10% Wide power range (4-36W) Universal input voltage (120 277V) High power factor Highly efficient Side lead and bottom feed versions culus Recognized, Class 2, 47 CFR Part 15, Class B Approved GE Lightech drivers for Infusion NPM modules Product Code Description Wiring Safety Compatible Module Series Diming 66904 LED 36W DC 700mA Side lead Class 2 NPM Trailing edge 66905 LED 36W DC 700mA Bottom Feed Class 2 NPM Trailing edge 66898 LED 36W DC 700mA Side Lead Class 2 NPM Leading/ Trailing edge 66899 LED 36W DC 700mA Bottom Feed Class 2 NPM Leading/ Trailing edge Infusion LED modules must be used with an approved driver to validate warranty. For a complete list of approved drivers, visit www.gelighting.com/infusion. Zhaga product data set Product Description Luminous Flux CCT [K] CRI LES OCA Luminance Uniformity U Luminance Rotational Symmetry S Tr, max [ C] Rth, max [K/W] Ambient Temp [ C] MP30/827/W/N C011 2700 80 LES 9 OCA A 0.48 0.95 60.1 1.65 25 MP30/830/W/N C011 3000 80 LES 9 OCA A 0.48 0.95 60.1 1.65 25 MP30/930/W/N C011 3000 87 LES 9 OCA A 0.48 0.95 60.1 1.65 25 MP30/840/W/N C015 4000 80 LES 9 OCA A 0.48 0.95 60.1 1.65 25 www.gelighting.com and General Electric are both registered trademarks of the General Electric Company GE Lighting is constantly developing and improving its products. For this reason, all product descriptions in this brochure are intended as a general guide, and we may change specifications from time to time in the interest of product development, without prior notification or public announcement. All descriptions in this publication present only general particulars of the goods to which they refer and shall not form part of any contract. Data in this guide has been obtained in controlled experimental conditions. However, GE Lighting cannot accept any liability arising from the reliance on such data to the extent permitted by law. Infusion Module NPM Series Data Sheet October 2012