NO MINIMUMS - NO RESERVES PUBLIC AUCTION UPPER COLUMBIA MILL

NO MINIMUMS - NO RESERVES PUBLIC AUCTION UPPER COLUMBIA MILL DAY 1 SAWMILL 9AM - WEDNESDAY - APRIL 12 77200 POLELINE ROAD, DAY 2 ABRASIVE SANDER MILL 9AM - THURSDAY - APRIL 13 71410 E COLUMBIA AVE, BID LIVE OR BID ONLINE WITH MURPHYLIVE! James G. Murphy Co. Commercial & Industrial Auctioneers 1.800.426.3008-425.486.1246 murphyauction.com

SAWMILL: DAY 1 MERCHANDISER W/LOG SCANNING 2012 WEST COAST INDUSTRIAL SYSTEM WHOLE LOG MERCHANDISER W/(6) 72 INSERT TOOTH INDIVIDUALLY POSITIONED CHOP SAWS W/75 HP MOTORS, HOLD DOWN & CLAMP ARMS, 30 HP SAW POSITIONING DRIVES, 7-1/2 HP SAW CYCLE DRIVES, APPROX. 70 X30 BLOCK RECEIVING BELT W/TOSHIBA 40 HP MOTOR TO SM CYCLO 17:1 REDUCER, LINEAL POSITIONED LOG PUSHING END FENCE, 12 8-STRAND JACK LADDER INFEED, (2) 22 4-ARM ROTARY KICKERS, APPROX. 150 X30 INFEED LOG BELT W/BELT TAKE UP & GEARHEAD DRIVE, MERCHANDISER LOG SCANNER W/(2) JOE SCAN JS-20 SCAN HEADS, S/N: 436, APPROX. 76 OUTFEED LOG BELT W/(3) MOTOR DRIVEN VENEER BLOCK KICKERS & (2) LOG DECK KICKERS W/TOSHIBA 5 HP MOTOR TO SUMITOMO 28 RPM REDUCERS, NICHOLSON 600 GALLON HYDRAULIC UNIT W/(2) KAWASAKI 50 HP/50 GPM PUMPS & (1) DENNISON 60 GPM RECIRCULATING PUMP, AIR COOLED, ALLEN BRADLEY BULLETIN 2100 MCC W/10-SECTIONS, (21) SWITCHES & (18) ALLEN BRADLEY SMC FLEX 150-F135NBD VFD S W/TOUCH PAD CONTROLS, ALLEN BRADLEY INTELLICENTER 8-SECTION MCC W/(21) SWITCHES & ALLEN BRADLEY POWER FLEX 700 25 HP AC DRIVE W/TOUCH PAD CONTROLS LOG LOADER SERCO 200-F HYDRAULIC OPERATED PEDESTAL MOUNT HEEL BOOM LOG LOADER, 26 BOOM, APPROX. 75 ELECTRIC MOTOR, S/N: L7087 (NOT INSTALLED) STEP FEEDERS 2008 COMACT 15 6-STEP MECHANICAL LOG STEP FEEDER W/MOTOR TO SM CYCLO DRIVE (INFEED TO OPTIMIZED TWIN BAND LINE) LINDEN 15 7-STEP MECHANICAL LOG STEP FEEDER W/MOTOR TO SM CYCLO DRIVE (LOG DECKS) LINDEN 15 3-STEP MECHANICAL LOG STEP FEEDER W/MOTOR TO SM CYCLO DRIVE (VENEER BLOCK FEEDER FROM MERCHANDISER) LOG DECKS - LACK LADDER APPROX. 80 X15 5-STRAND INFEED LOG TRANSFER DECK, S-DRIVE, 15 HP APPROX. 40 X15 4-STRAND INFEED LOG TRANSFER DECK, S-DRIVE, 15 HP APPROX. 60 X15 4-STRAND INFEED LOG TRANSFER DECK, S-DRIVE, 15 HP 14 X15 4-STRAND JACK LADDER TRANSFER W/25 HP MOTOR TO SM CYCLO 22.4 RPM REDUCER TWIN BAND HEADRIG W/SCANNING 2007 COMACT 972 CETEC 6 TEMPOSONIC POSITIONED OPTIMIZED TWIN VERTICAL BAND HEADRIG W/TOSHIBA 200 HP/1780 RPM DRIVE MOTORS, (2) ALLEN BRADLEY SMC PLUS FLEX 150-F317NBD AC DRIVES, HYDRAULIC STRAIN, VULCAN INTERMEC LUBE SYSTEM, S/N: 972CE3160080102338, COMACT 975 TEMPOSONIC POSITIONED 8-KNIFE CANTERS W/LINDEX KNIVES & TOSHIBA 250 HP/1785 RPM MOTORS, (2) ALLEN BRADLEY SMC PLUS FLEX 150-F251NBD AC DRIVES, COMACT 961 OLI-CS3 OPTIMIZED INFEED MODULE W/MULTI-AXIAL SHIFTS & SKEWS W/TOSHIBA 40 HP MOTOR TO REX EARTH 23.61 RPM REDUCER, (2) COMACT VERIFYING ROTATION CAMERAS, (6) FINAL CAMERAS, (6) SCAN MEG SCANNERS, FEED & HOLD DOWN ROLLS, COMACT 964 FLYING LOG TURNER, COMACT 861 50 V-FLIGHT MEASURING CONVEYOR W/TOSHIBA 25 HP MOTOR TO REX REDUCER, COMACT C1 SCANNING STATION W/(8) CAMERAS, (2) LASERS & (2) SCAN MEG SCANNERS, TWIN APPROX. 12 X20 CANTED FEED BELTS W/MOTOR TO SM CYCLO REDUCERS, COMACT 966 OUTFEED MODULE W/SHARP CHAIN, TOSHIBA 25 HP MOTOR TO SM CYCLO DRIVE, TWIN 20 X30 SIDE BOARD BELTS W/7-1/2 HP MOTORS TO SM CYCLO REDUCERS, ALLEN BRADLEY INTELLICENTER 5-SECTION MCC W/(1) 15 HP & (1) 5 HP ALLEN BRADLEY POWERFLEX 700 VFD S, ALLEN BRADLEY CENTERLINE 2100 3-SECTION MCC W/(3) SWITCHES, COMACT 5-SECTION MCC W/(9) ALLEN BRADLEY POWERFLEX 700 DRIVES, (2) 40 HP, (6) 30 HP & (1) 20 HP DRIVES, COMACT CONTROL ROOM W/SCANNING COMPUTERS, PLC & MOTION CONTROLLERS, PFS 600 GALLON HYDRAULIC UNIT W/(2) 50 HP, (1) 25 HP, (1) 15 HP & (1) 7-1/2 HP RECIRCULATING PUMPS, 10 X15 AIR CONDITIONED CONTROL CAB W/COMACT VIEWING SCREEN & CONTROLS, LASER ALIGNMENT TOOLS, SPARE SAWS & PARTS, V-FLIGHT & SHARP CHAIN RESAW CAE 6 LH HORIZONTAL BAND RESAW, S/N: 71-87, APPROX. 200 HP MOTOR, HYDRAULIC STRAIN, PURE LUBE SYSTEM, 10 SMOOTH FEED THRU ROLLS W/HOLD DOWNS, FIXED GUIDES, 10 POWERED INFEED ROLLCASE W/(6) 12 X36 ROLLS, 24 POWERED OUTFEED ROLLCASE W/(11) 8-1/2 X30 ROLLS, 5 6-STRAND 81X JUMP TRANSFER, 6-ARM TIPPLE, ALLEN BRADLEY INTELLICENTER 8-SECTION MCC W/(27) SWITCHES, ALLEN BRADLEY SMC FLEX PLUS 150-F251-NBD AC DRIVE, (5) ALLEN BRADLEY POWERFLEX VFD S, (2) 15, (1) 10 HP, (1) 7-1/2 HP & (1) 5 HP, ALLEN BRADLEY LOGIX 5561 PLC W/(2) ETHERNET, (1) ANALOG, (2) 2-AXIS SERVO, (1) DC INPUT, (3) AC OUTPUT MODULES, SPARE SAWS PARTS EDGERS W/SCANNING 2008 TMT 8 BOTTOM ARBOR CURVE SAWING RH GANG EDGER, S/N: 5257, 8 X30 CAPACITY, 200-600 FPM, TOSHIBA 600 HP/1800 RPM MOTOR, GANG CLUSTER, #3 SPLINED 23 SAWS, CHROMED KNURLED FEED THRU ROLLS, 20 HP INVERTER DUTY MOTOR, INFEED & OUTFEED FEED & PRESS ROLL MODULES W/SKK 20 HP/190 RPM DRIVES, SAW LUBE SYSTEM, 30 X40 SCAN BELT W/ENDLESS BELT W/TAKE UP ASSEMBLY & SKK 30 HP/190 RPM DRIVE, (2) JOE SCAN JS20-01 SCANNER HEADS, S/N S: 1045 & 1046, 36 X22 OUTFEED BELT W/LINEAR POSITIONED EDGE PICKER, CLEARING & PRESS ROLLS, SKK 5 HP/125 RPM DRIVE, 13 CANT FEEDER TABLE W/ADJUSTABLE LINE BAR, (6) 8-1/2 X22 CANTED ROLLS, POP UP CANT TURNER, PINS & PIN STOPS, 4 3-STRAND JUMP TRANSFER W/SKK 7-1/2 HP/190 RPM & SKK 3 HP/37 RPM DRIVES, 13 5-STRAND 81X CANT QUEUING DECK, (5) BOARD HOOK S-STOPS, SKK 5 HP/37 RPM DRIVE, ALLEN BRADLEY SMC FLEX 150-F970NBE 1000 HP AC DRIVE W/AC & CHILLER, ALLEN BRADLEY INTELLICENTER 7-SECTION MCC W/(22) SWITCHES W/(1) 40 HP, (2) 25 HP, (3) 15 HP, (2) 10 HP, (2) 7-1/2 HP & (1) 5 HP ALLEN BRADLEY POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(3) ETHERNET, (1) COUNTER, (3) AXIS SERVO S, (1) DC INPUT, (2) AC INPUT & (3) AC OUTPUT MODULES, (4) ALLEN BRADLEY ULTRA 3000 SERVO CONTROLLERS, SPARE SAWS & PARTS 2009 OPTIMIL 2RS APPROX. 2 X30 3-SAW SHIFTING SAW RH BOARD EDGER W/(3) TOSHIBA 75 HP/3545 RPM MOTORS, 20 SAWS, CHROMED FEED THRU ROLLS, INFEED & OUTFEED FEED & PRESS MODULES W/DRIVES, 29 X72 SCAN BELT W/(2) JOE SCAN JS-20SR SCANNER HEADS, S/N S: 1047 & 1048, 34 X24 OUTFEED BELT W/WANESHEAR TEMPOSONIC EDGE PICKER, CLEARING ROLLS W/MOTOR TO MARS REDUCER, 34 X26 OUTFEED BELT W/SKK DRIVE TO 4 X11 SLOW DOWN BELT W/SKK DRIVE, 19 6-STRAND 81X INFEED TRANSFER W/BOARD TURNERS, REJECT ROLLS, SCAN MEG SCANNER, (2) DRIVES, 19 2-SECTION INFEED TRANSFERS W/EVEN END ROLLS, LIVE EVEN END CHAIN, SEQUENCING ROLLS, (3) TOSHIBA 5 HP/REX MERCURY 73 RPM DRIVES, 8 6-STRAND RADIUS BACK UNSCRAMBLER W/TOSHIBA 15 HP MOTOR TO REX VENUS 73 RPM REDUCER, ALLEN BRADLEY INTELLICENTER 10-SECTION MCC W/(34) SWITCHES W/(2) 20 HP, (1) 15 HP, (12) 7-1/2 HP & (1) 5 HP ALLEN BRADLEY POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(3) ETHERNET, (5) 2-AXIS, (1) DC INPUT, 2ND RACK W/(1) ETHERNET, (2) AC INPUT & (3) AC OUTPUT MODULES, ALLEN BRADLEY SERVO CABINET W/(6) ULTRA 3000 SERVO DRIVES, SPARE SAWS & PARTS TRIMMERS - SCANNING - LUG LOADER 2007 TECO/TURNER 13 INDIVIDUALLY MOTORIZED BOARD TRIMMER, 6 CUT, ZERO, 2, 4, 6, 8, 10, 3M, 12 & 4M SAWS W/7-1/2 HP MOTORS, 3-STAGE SWING GATE STYLE FENCE W/(3) ALLEN BRADLEY ULTRA 3000 SERVO CONTROLLERS, 18 7-STRAND 81X LUGGED FEED THRU TRANSFER W/(5) 7 EVEN END ROLLS, CLEANOUT CONVEYOR, (18) JOE SCAN 20WX SCAN HEADS W/12 7-STRAND 81X LUGGED SCANNER TRANSFER, 5 6-STRAND 81X INFEED INFEED TO LUG LOADER W/EURODRIVE, 10 6-STRAND 81X TRANSFER W/SKK 3 HP/68 RPM DRIVE, (6) 8-1/2 X36 CANTED EVEN END ROLLS W/SKK DRIVE, 12 6-STRAND RADIUS BACK UNSCRAMBLER W/SKK DRIVE, ALLEN BRADLEY INTELLICENTER 9-SECTION MCC W/(40) SWITCHES W/(1) 7-1/2 HP & (3) 5 HP ALLEN BRADLEY POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(3) ETHERNET, (1) ANALOG INPUT, (2) 2-AXIS SERVO, (1) DC INPUT, (3) AC INPUTS, (3) AC OUTPUT MODULES, SPARE SAWS & PARTS 2007 TECO/TURNER 13 INDIVIDUALLY MOTORIZED TIMBER TRIMMER, 10 CUT, ZERO, 8, 10 & 12 SAWS W/10 HP MOTORS, 24 SAWS, 22 6-STRAND 81X LUGGED FEED THRU TRANSFER W/(4) 4 EVEN END ROLLS, DROP OUT BELT, 10 6-STRAND RADIUS BACK UNSCRAMBLER 2007 PLC 200 NC-12 TONG LOADER, S/N: NC603-12M, (2) ALLEN BRADLEY POWERFLEX 700 7-1/2 HP AC DRIVES, MICROLOGIX 1100 MINI PLC (BOARD TRIMMER LINE) SORTERS/STACKERS 2007 TECO/TURNER 13 15-BIN SORT PUSH BIN SLANT BIN BOARD SORTER, PROJECT #2027G, 8-13 CAPACITY, 4 BIN CENTERS, WESTINGHOUSE 60 HP MOTOR TO SKK 84 RPM REDUCER SORTER DRIVE, 12 6-STRAND 81X INFEED TRANSFER (FROM TRIMMER) W/(7) 7 EVEN END ROLLS, 15 5-STRAND 81X INCLINE TRANSFER, (3) 38 5-STRAND TAKE AWAY CHAINS W/(2) SKK 7-1/2 HP/56 RPM DRIVES, 24 5-STRAND 81X LUGGED DECLINE TRANSFER TO APPROX. 50 4-STRAND 81X PULL CHAIN W/EU- RODRIVE GEARHEAD, 30 POWERED RE-ENTRY ROLLCASE W/(13) 9 X54 JUMP ROLLS, 5 HP MOTOR TO SKK 84 RPM REDUCER, WCS 40 HP HYDRAULIC UNIT 2007 TECO/TURNER 13 28-BIN PUSH LUG SORTER, APPROX. 50 HP WEG MOTOR TO SM CYCLO SORTER DRIVE, 110 4-STRAND PUSH LUG TRANSFER, 24 4-STRAND 81X TAKE AWAY TRANSFER W/LEESON 3 HP MOTOR TO REX MARS 32 RPM REDUCER, 90 4-STRAND 81X TAKE AWAY TRANSFER W/SKK 7-1/2 HP/25 RPM DRIVE, ALLEN BRADLEY INTELLICENTER 16-SECTION MCC W/(56) SWITCHES W/(1) 50 HP, (1) 20 HP, (2) 15 HP, (1) 7-1/2 HP, (9) 5 HP POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(2) ETHERNET, (1) ANALOG, (1) COUNTER & (1) DC OUTPUT MODULES, HPS 40 HP HYDRAULIC UNIT, ACCUMULATOR, AIR COOLED 2007 MOCO 14 LH 1/3 CRIB STYLE BOARD STACKER W/AUTO STICK PLACER, 1-4 THICKNESS, 3-1/2-12 WIDTH, 6-13 4 LENGTH CAPACITIES, 72 X96-1/2 PACKAGE, 7/8 X1-1/2 X96 STICKERS, 9-CYCLES PER MIN., 96 LOWERING ROLLCASE W/(5) ROLLS, SECONDARY LIFT ARMS W/PULL BACK, (8) STICKER PLACING ARMS, (2) APPROX. 20 6-STRAND 81X INFEED TRANSFERS W/(2) EVEN END CHAINS, 60 EVEN END ROLLS, (2) 18 POWERED OUTFEED ROLLCASES W/(7) 8 X101 ROLLS, TECO GEARHEAD DRIVES, 18 6-STRAND RADIUS BACK UNSCRAMBLER W/7-1/2 HP DRIVE, 24 5-STRAND 81X INCLINE W/SKK 5 HP/30 RPM DRIVE, ALLEN BRADLEY CENTERLINE 5-SECTION MCC W/(18) SWITCHES W/(2) 15 HP, (1) 10 HP, (2) 5 HP & (3) 2 HP POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(3) ETHERNET, (1) AC INPUT, (3) AC OUTPUTS, (2) DC INPUT MODULES, SERVO CABINET W/(12) REX ROTH INDRA DRIVE SERVO CONTROLLERS TIMBER SORTER 14 OVER END STACKER W/(4) 54 LOWERING FORKS W/(2) MOTOR TO REDUCER DRIVES, 12 & 9 4-STRAND 81X INFEED TRANSFERS, 16 4-STRAND 81X OUTFEED W/3-SECTION SCISSOR LIFT, SKK DRIVE, 9 4-STRAND 81X LUGGED UNSCRAMBLER W/MOTOR TO REX DRIVE CHIPPER WEST SALEM MACHINERY 66-8HB 66 8-KNIFE CHIPPER, S/N: 101589 W/TECO 300 HP/1180 RPM MOTOR, HORIZONTAL INFEED, BOTTOM DISCHARGE, LINDEX CONVERSION, ALLEN BRADLEY SMC FLEX 150-F361NBDB DRIVE, SPARE KNIVES & PARTS NICHOLSON 55 LILY PAD CHIPPER W/APPROX. 150 HP MOTOR, DROP FEED, BOTTOM DISCHARGE, S/N: 1673, APPROX. 36 X42 INFEED CHEVRON BELT W/5 FIBERGLASS TUB, MDI CR85 METAL DETECTOR W/XR 365 SEARCH COIL, S/N: XRS11009, SKK DRIVE, APPROX. 20 X28 OUTFEED CHEVRON BELT W/SKK DRIVE VIBRATORY CONVEYORS WEST SALEM MACHINERY CSCB46 24 X46 VIBRATORY CONVEYOR, S/N: 329589 W/5 FIBERGLASS TUB, MDI CR85 METAL DETECTOR, S/N: 71689 MILL POWER 16 X96 VIBRATORY CONVEYOR, S/N: 87184 WASTE CONVEYORS - TRANSFERS - CONVEYORS - ROLLCASES APPROX. 110 8 X14 BOX CHAIN W/FLITES CONVEYOR (FROM BOARD TRIMMER), S-DRIVE, SKK DRIVE APPROX. 90 8 X14 BOX CHAIN W/FLITES CONVEYOR (FROM TWIN), S-DRIVE, SKK DRIVE APPROX. 75 6 X11-1/2 BOX CHAIN W/FLITES CONVEYOR (FROM BOARD EDGER), S-DRIVE, SKK DRIVE APPROX. 70 6 X11-1/2 BOX CHAIN W/FLITES CONVEYOR (FROM BOARD EDGER), S-DRIVE, SKK DRIVE APPROX. 40 6 X11-1/2 BOX CHAIN W/FLITES CONVEYOR (FROM RESAW), S-DRIVE, SKK DRIVES APPROX. 36 8 X14 BOX CHAIN W/FLITES CONVEYOR (FROM TWIN), S-DRIVE, SKK DRIVE APPROX. 20 6 X11-1/2 BOX CHAIN W/FLITES CONVEYOR (CHIPPER BYPASS), SKK DRIVE APPROX. 18 X65 CLEAN OUT BELT CONVEYOR (FROM BOARD TRIMMER), MOTOR TO REX DRIVE APPROX. 16 X40 CLEAN OUT BELT CONVEYOR (FROM TWIN), MOTOR TO REX DRIVE PARTIAL APPROX. 100 8 X14 BOX CHAIN W/FLITES CONVEYOR (FROM CHIPPER), NO DRIVE NUMEROUS LUMBER TRANSFERS, CONVEYORS & ROLLCASES FILING & GRINDING EQUIPMENT SIMONDS RMO BANDSAW LEVELER, S/N: 06942-412 WRIGHT TALON TW-2 BANDSAW AUTO TIPPER, STANDS, S/N: L0705 WRIGHT W1902-P BANDSAW DUAL SIDE GRINDER, STANDS, S/N: G0801 ARMSTRONG #4RH BANDSAW SHARPENER W/LINEAL SLIDE, STANDS, S/N: 39148 ARMSTRONG #4LH BANDSAW SHARPENER W/LINEAL SLIDE, STANDS, S/N: 39140 ARMSTRONG #2RH BANDSAW SHARPENER W/(2) VFD S, STANDS, S/N: 7442 ARMSTRONG BANDSAW STRETCHER ROLL W/ANVILS & STAND WRIGHT TALON P-1 CNC ROUND SAW GRINDER, S/N: D0801 WRIGHT TALON DS-3 DUAL SIDE GRINDER, S/N: J0705 WRIGHT W150 TOP & FACE GRINDER ARMSTRONG 3-10 CIRCLE SAW STRETCHER ROLL W/GB310C SLIDE SAW CARRIAGE UPGRADE 2007 ACME BSA1000 CIRCLE SAW SHARPENER, S/N: J2024 IMW 240SS DUAL HEAD GUIDE RESURFACER LINDEX ILMTECH AUTO KNIFE GRINDER BARNHARDT NO. 51 WHEEL GRINDER W/POWER HEADS, BARREL, FLEX CABLE BANDSAW GUIDE GRINDER, GUIDE MATERIAL, ANVILS, CIRCLE SAW SET UP STAND, SYSTIMATIC GRANITE PLATE, SPARE BAND & ROUND SAWS

SAWMILL ELECTRICAL 2006 GE SPECTRA SERIES 4000 AMP 3-SECTION MAIN W/GE POWER BREAK II 4000 AMP BREAKER, (1) 1200 AMP, (3) 800 AMP & (2) 600 AMP BREAKERS ALLEN BRADLEY INTELLICENTER 16-SECTION MCC W/(56) SWITCHES, (14) ALLEN BRADLEY POWERFLEX 700 DRIVES ALLEN BRADLEY INTELLICENTER 10-SECTION MCC W/(34) SWITCHES, (16) ALLEN BRADLEY POWERFLEX 700 DRIVES ALLEN BRADLEY INTELLICENTER 9-SECTION MCC W/(40) SWITCHES, (4) ALLEN BRADLEY POWERFLEX 700 DRIVES ALLEN BRADLEY INTELLICENTER 8-SECTION MCC W/(27) SWITCHES, (5) ALLEN BRADLEY POWERFLEX 700 DRIVES ALLEN BRADLEY INTELLICENTER 8-SECTION MCC W/(21) SWITCHES, (1) ALLEN BRADLEY POWERFLEX 700 DRIVES ALLEN BRADLEY INTELLICENTER 7-SECTION MCC W/(22) SWITCHES, (11) ALLEN BRADLEY POWERFLEX 700 DRIVES ALLEN BRADLEY INTELLICENTER 6-SECTION MCC W/(20) SWITCHES, (1) ALLEN BRADLEY POWERFLEX 700 DRIVES ALLEN BRADLEY INTELLICENTER 5-SECTION MCC W/(22) SWITCHES, (2) ALLEN BRADLEY POWERFLEX 700 DRIVES ALLEN BRADLEY BULLETIN 2100 10-SECTION MCC W/(21) SWITCHES, (18) ALLEN BRADLEY POWERFLEX 700 DRIVES ALLEN BRADLEY BULLETIN 2100 5-SECTION MCC W/(18) SWITCHES, (8) ALLEN BRADLEY POWERFLEX 700 DRIVES ALLEN BRADLEY BULLETIN 2100 3-SECTION MCC W/(3) SWITCHES, ALLEN BRADLEY POWERFLEX 700 DRIVES COMACT 5-SECTION STARTER CABINET W/(9) ALLEN BRADLEY POWERFLEX 700 DRIVES (5) ALLEN BRADLEY SMC PLUS FLEX DRIVES TO 1000 HP (6) ALLEN BRADLEY LOGIX 5571 & 5561 PLC S ALL MCC S & PLC S ARE DEVICENET NETWORK ENABLED (40±) NEW & REBUILT SPARE MOTORS TO 600 HP/775 RPM, (15±) NEW & REBUILT SPARE SKK GEARHEAD MOTORS & REDUCERS TO 20 HP/45 RPM, (15±) SPARE SM CYCLO REDUCERS, SPARE REX REDUCERS CRANE & JIB ARMS HARRINGTON 5-TON UNDERSLUNG BRIDGE CRANE W/POWER TRAVEL, APPROX. 50 SPAN, 70 TRAVEL (2) SPANCO 2-TON JIB ARMS W/CM LODESTAR 2-TON ELECTRIC CHAIN HOISTS 1-TON JIB ARM W/CM VALUSTAR 1-TON ELECTRIC CHAIN HOIST MISCELLANEOUS MILL EQUIPMENT & SUPPLIES MILLER BLUE STAR 185 GAS WELDER/GENERATOR, (2) WAGNER L722 STACK PROBES, ENGINE STAND, (2) CHERRY PICKERS, SHARK PRESSURE WASHER, CHAIN HOISTS, FALL PROTECTION, FLOOR FANS, PORTABLE HEATERS, 5500 LB PALLET JACK, PORTABLE COOLER, FLAMMABLES CAB- INETS, GANG BORES, AIR & ELECTRIC REELS, SHOP VAC S, RUBBER MATS, INTERCOMS, CAMERAS, DUMPSTERS, BLUEPRINT CABINETS, COPIERS, PRINTERS, COMPUTERS & OFFICE FURNITURE SAWMILL ROLLING STOCK 1984 CAT 992C RUBBER TIRE WHEEL LOADER W/CAT 3412 700 HP DIESEL ENGINE, 13 CU. YD. BUCKET, 45.65-45 TIES, HOUR METER READS: 445.5, S/N: 49Z00431 1996 CAT 950F RUBBER TIRE LOG LOADER W/CAT BUCKET, CAT 3116 DIESEL ENGINE, 23.5-25 TIRES, HOUR METER READS: 16,544, S/N: 5SK02038 1989 LINKBELT LS4300C SERIES II TRACK MOUNTED HEEL BOOM LOG LOADER, PIERCE HLB2540 HEEL BOOM W/SWIVEL GRAPPLE, S/N: PHLB8684, HOUR METER READS: N/A, S/N: C8130640 1989 LINKBELT LS4300C SERIES II TRACK MOUNTED HEEL BOOM LOG LOADER, PIERCE HLB2340 HEEL BOOM W/SWIVEL GRAPPLE, S/N: PHLB8684, HOUR METER READS: N/A, S/N: 430425473 1975 BARKO 275A SELF-PROPELLED TANDEM AXLE HEEL BOOM LOG LOADER, 6-CYLINDER TURBO DIESEL ENGINE, OUTRIGGERS, 315/80R-22.5 TIRES, S/N: 17510 DOOSAN D160S-5 FORKLIFT, 22,500 LB CAPACITY, DIESEL, 177 2-STAGE 8 FORKS, DUAL PNEUMATIC TIRES, ENCLOSED CAB, HOUR METER READS: N/A, S/N: D-00260 DOOSAN G70S-5 FORKLIFT, 12,600 LB CAPACITY, PROPANE, 217 2-STAGE 46 FORKS, DUAL PNEUMATIC TIRES, ENCLOSED CAB, HOUR METER READS: 9,571, S/N: PG0014 (EQUIP. #99.013) 2002 SKYTRACK 6036 TELESCOPIC FORKLIFT, 6,000 LB CAPACITY, 36 REACH, CUMMINS 4BT3.9 TURBO DIESEL, HOUR METER READS: 4,196, S/N: T469R-1627 2000 INTERNATIONAL 9100I 6X4 TANDEM AXLE TRACTOR, ISM TURBO DIESEL ENGINE, EATON FULLER 10-SPEED TRANSMISSION, PROTECH ALUMINUM HEADACHE RACK, ALUMINUM FUEL TANKS, 235-75R22.5 TIRES, ODOMETER READS: 427,100 MILES, VIN: 1HSCBAHR7YJ063233 2000 INTERNATIONAL 9100I 6X4 TANDEM AXLE TRACTOR, ISM TURBO DIESEL ENGINE, EATON FULLER 10-SPEED TRANSMISSION, PROTECH ALUMINUM HEADACHE RACK, ALUMINUM FUEL TANKS, 235-75R22.5 TIRES, ODOMETER READS: 469,930 MILES, VIN: 1HSCBAHR2YJ063209 TIRES, VIN: 1ALSF0286WS981330, LVS #17 TIRES, VIN: 1ALSF0284WS918326, LVS #19 TIRES, VIN: 1ALSF028XWS981072, LVS #16 TIRES, VIN: 1ALSF0280WS981341, LVS #18 1993 UTILITY ATCO 78 24 TANDEM AXLE FLATBED TRAILER, 295/75R22.5 TIRES, VIN: 1ALCA2162PS931220 1979 UTILITY 40 TANDEM AXLE FLATBED TRAILER, 295/75R22.5 TIRES, VIN: 7L91961002, LVS #24 1968 BROWN 32 TANDEM AXLE FLATBED TRAILER, 295/75R16 TIRES, VIN: S684611C, LVS #27 1968 BROWN 32 TANDEM AXLE FLATBED TRAILER, 295/75R16 TIRES, VIN: S684512C, LVS #28 2008 PREMIER NORTHWEST 8 X16 TANDEM AXLE GOOSENECK TRAILER W/FOLD DOWN RAMPS, 20,000 GVWR, 235/80R16 TIRES, VIN: 1P9GF25278H539795 2008 TOYOTA TACOMA XTRA CAB 4X4 PICKUP, GAS ENGINE, MANUAL TRANSMISSION, TRUCK BOX, SILVER, ODOMETER READS: 67,783 MILES, VIN: 5TEUX42N18Z535038 2008 TOYOTA TACOMA XTRA CAB 4X4 PICKUP, GAS ENGINE, MANUAL TRANSMISSION, TRUCK BOX, WHITE, ODOMETER READS: 98,761 MILES, VIN: 15TEUX42N78Z539384 2006 CHEV SILVERADO PICKUP 2001 DODGE RAM 3500 4X4 PICKUP, MAGNUM V8 GAS ENGINE, AUTO TRANSMISSION, GREEN, ODOMETER READS: 146,372 MILES, VIN: 3B7KF26Z91M254961 2001 CHEV 3500 4-SEAT PASSENGER VAN, GAS ENGINE, AUTO TRANSMISSION, WHITE, ODOMETER READS: 72,180 MILES, VIN: 1GAHG39R411224099 1992 FORD F350 4X4 SERVICE TRUCK, GAS ENGINE, AUTO TRANSMISSION, SERVICE BODY, MILLER BOBCAT 225 WELDER, HOSE REELS, ODOMETER READS: 133,725 MILES, VIN: 2FTHF36H7NCA60227 1998 GENIE 40, 4WD MANLIFT, 40 REACH, 500 LB CAPACITY, HOUR METER READS: 6,085 PLANER MILL: DAY 2 KILNS (3) 2012 SII SIDE LOAD STEAM FIRED PACKAGE KILNS, APPROX. 24 H X 50 W X 60 L ALL ALUMINUM & STAINLESS STEEL CONSTRUCTION, (12) SMITHCO 72 REVERSING FANS W/20 HP MOTORS, (6) EXHAUST FANS, 6 X6 KILN COILS, POWER ASSIST CARRIER CLAMPS, CS21 VENT-X-CHANGER AIR HANDLER/HEAT EXCHANGER W/150 HP MOTOR, 60 & 50 MANIFOLDS, 2013 SIEMENS 3000 AMP 3-SECTION MAIN, (13) ALLEN BRADLEY POWERFLEX 700 200 HP DRIVES W/VK LINE PROTECTORS, ALLEN BRADLEY LOGIX 5571 PLC, SPIRAX SARCO BFT.40-15, 500 GALLON CONDENSATE TANK W/PUMPS, EMC MISTIFYING SYSTEM, CARRIER 174,000 BTU COOLING UNIT, ON-LINE TOC-VCSH TOTAL ORGANIC CARBON ANALYZER (6) 2008 SII SIDE LOAD STEAM FIRED PACKAGE KILNS, APPROX. 24 H X 50 W X 60 L ALL ALUMINUM & STAINLESS STEEL CONSTRUCTION, (12) SMITHCO 72 REVERSING FANS W/20 HP MOTORS & (6) EXHAUST FANS, 6 X6 KILN COILS, POWER ASSIST CARRIER CLAMPS, CS21 VENT-X-CHANGER AIR HANDLER/HEAT EXCHANGER W/TOSHIBA 200 HP MOTOR, 60 & 50 MANIFOLDS, 2008 GE SPECTRA SERIES 3000 AMP 3-SECTION MAIN, (25) ALLEN BRADLEY POWERFLEX 700 200 HP DRIVES, ALLEN BRADLEY SLC 5/05 PLC, APPROX. 500 GALLON CONDENSATE TANK W/PUMPS, RUUD 150,000 BTU COOLING UNIT 3/4 X1 X 96 LAMINATED STICKERS, 4 X4 LUMBER BUNKS (15) STICKER RACKS ABRASIVE SANDER 2008 KIMWOOD (RECONDITIONED) 4-HEAD 4 WIDE RH ABRASIVE PLANER W/(4) OPPOSED SANDING & FINISHING HEADS W/12-1/2 X60 CONTACT ROLLS, (2) TOSHIBA 200 HP/1800 RPM 441T FRAME SANDING DRIVES & (2) TOSHIBA 150 HP/1800 RPM 445T FRAME FINISHING DRIVES, GOBBLER FEED CHAINS W/AIR LOADING, AUTO BELT TRACKING, PINCH & FEED ROLLS, ANTI-KICK BACK, CHROMED IN & OUT GUIDE BARS, 22 POWERED INFEED ROLLCASE W/(11) 6-1/2 X60 ROLLS, SKK 5 HP/190 RPM DRIVE, 20 POWERED OUTFEED ROLLCASE W/(10) 8-1/2 X60 ROLLS, SKK 5 HP/190 RPM DRIVES, S/N: 50248, ALLEN BRADLEY INTELLICENTER 8-SECTION MCC W/(19) SWITCHES, (2) ALLEN BRADLEY SMC FLEX 150-F251NBD 200 HP DRIVES, (3) 20 HP & (2) 7-1/2 HP POWERFLEX 700 DRIVES, ALLEN BRADLEY INTELLICENTER 7-SECTION MCC W/(19) SWITCHES, (2) ALLEN BRADLEY SMC FLEX 150-F251NBD 200 HP DRIVES, (1) 25 HP & (6) 5 HP POWERFLEX 700 DRIVES REMAN EQUIPMENT MEREEN JOHNSON 424-DC 3 AIR LOADED H-SERIES GANG RIPSAW, S/N: 5652, 75 HP ARBOR DRIVE, 3 HP FEED DRIVE, 30-150 FPM, 24 ARBOR, FEED THRU DIP CHAIN, POWER PRESS ROLLS, 8 POWERED INFEED ROLLCASE W/(5) 8-1/2 X24 ROLLS, KAMAN 8 4-STRAND 81X INFEED TRANSFER W/4 3-STRAND LOADING TRANSFER, SKK DOUBLE REDUCTION DRIVE, 7 POWERED OUTFEED ROLLCASE W/(4) 8-1/2 X24 ROLLS, HOLD DOWN ROLL, SKK 3 HP/155 RPM DRIVE, (6) MINI LASERS, ALLEN BRADLEY INTELLICENTER 7-SECTION MCC W/(27) SWITCHES W/ALLEN BRADLEY SMC FLEX 150-F34NBD DRIVE, (1) 50 HP, (3) 7-1/2 HP & (1) 5 HP ALLEN BRADLEY POWERFLEX 700 DRIVES 1994 WEINIG H22AL 6-HEAD MOULDER, 8-5/8 X4-3/4 CAPACITY, APPROX. 7-1/2 HP BOTTOM, 5 HP RIGHT & LEFT, 7-1/2 HP TOP, 15 HP TOP & 7-1/2 HP BOTTOM HEADS, 2/8 SPINDLE, ELECTRICAL CABINET & SPARE HEADS (NOT INSTALLED) WACO JONSEREDS BKL-RH 42 TWIN VERTICAL BAND RESAW W/NORDISK 15 HP/1745 RPM DRIVES, HYDRAULIC DRIVEN FEED THRU ROLLS, SPARE SAWS BREAKDOWN & TILT HOISTS - STICKER RECLAIM SYSTEM TECO/TURNER 14 5-ARM X 101 MECHANICAL SANDER BREAKDOWN HOIST W/HYDRAULIC OPERATED LOAD LEVELER SECONDARY HOIST FORKS, SKK 10 HP/20 RPM DOUBLE REDUCTION DRIVE, 35 6-STRAND INFEED TRANSFER W/LIFT ARMS, SKK 10 HP/56 RPM DRIVE, 19 6-STRAND INFEED TRANSFER W/SKK 7-1/2 HP/56 RPM DRIVE, 8-1/2 6-STRAND LUG DECLINE MOCO 96 STICKER RECLAIM SYSTEM (AT SANDER) W/12 X28 STICKER BELT TO 7 UNSCRAMBLER TO 20 2-STRAND OVERHEAD CHAINS TO STICKER ACCUMULATOR BOX W/PNEUMATIC PACKING GATE, 38 2-STRAND BUNK TRANSFER 10 3-ARM X 51 MECHANICAL RE-ENTRY TILT HOIST (TO TRIMMER) W/BALDOR 7-1/2 HP MOTOR TO SKK 56 RPM REDUCER W/20 4-STRAND H78 RE-ENTRY TRANSFER W/GEARHEAD DRIVE 6 2-ARM X 101 MECHANICAL RE-ENTRY TILT HOIST (TO RIPSAW) W/30 HP MOTOR TO HITACHI REDUCER W/18 4-STRAND H78 RE-ENTRY TRANSFER W/TECO 5 HP MOTOR TO DAVID BROWN/RADICON 71:1 REDUCER TRIMMER 2007 TECO/TURNER 14 LH INDIVIDUALLY MOTORIZED TRIMMER W/(10) 7-1/2 HP X 24 SAWS, ZERO, 2, 4, 6, 7, 8, 9, 10, 11 & 12 SAWS, 2-STAGE CLD POSITIONED FENCE W/(2) ALLEN BRADLEY ULTRA 3000 SERVO CONTROLLERS, 20 6-STRAND 81X LUGGED FEED THRU TRANSFER W/(6) 6-1/2 X80 ROLLS & (2) SETS OF LIFT ARMS, CLEANOUT CONVEYOR, ALLEN BRADLEY INTELLICENTER 6-SECTION MCC W/(2) 7-1/2 HP & (3) 5 HP POWERFLEX 700 DRIVES, ALLEN BRADLEY 5561 PLC W/(3) ETHERNET, (2) COUNTER, (2) 2-AXIS SERVOS, (3) DC INPUT & (2) AC OUTPUT MODULES LUG LOADER - GRADE MARK READERS - MOISTURE METERS 2007 PLC 200 NC604-12P LUG LOADER, S/N: 0712CHA02 W/5 5-STRAND 81X INFEED, GEARHEAD DRIVE W/ALLEN BRADLEY POWERFLEX 700 DRIVES, ALLEN BRADLEY MICROLOGIX PLC 2008 LUCIDYNE M5-200 GRADE MARK READER, S/N: 2787 2008 WAGNER APEX MOISTURE METER W/(5) SENSORS, S/N: 3183 (TRIMMER) 2011 APEX OMEGA MOISTURE METER, S/N: OMEGA136 W/(4) MODEL 21870 SIDEWAYS SENSORS, S/N: 041910005, MOISTURE TESTER POTS (NOT INSTALLED) SORTER 2007 TECO/TURNER 13 9-TRAY LH TRAY SORTER, 285 5-STRAND FEED THRU TRANSFER W/(27) 3 HP/82 RPM DRIVES, 24 5-STRAND LUGGED INFEED INCLINE TRANSFER, 27 4-STRAND 6 BELT OUTFEED TIPPLE W/SKK 7-1/2 HP/56 RPM TOWER DRIVE, SKK 5 HP/56 RPM BELT DRIVES, 22 5-STRAND LUGGED DECLINE TRANSFER (TO PULL CHAINS) W/SKK 2 HP/230 RPM DRIVE, 100 & 60 4-STRAND 81X PULL CHAINS W/GEARHEAD DRIVE, 25 2-STRAND 81X OUTFEED TRANSFER W/TOSHIBA 7-1/2 HP MOTOR TO SM CYCLO 195:1 DRIVE, ALLEN BRADLEY INTELLICENTER 9-SECTION MCC W/(41) SWITCHES W/(1) 15 HP & (1) 7-1/2 HP ALLEN BRADLEY POWERFLEX DRIVES, ALLEN BRADLEY CENTERLINE 5-SECTION MCC W/(22) SWITCHES W/(1) 15 HP, (3) 7-1/2 HP & (2) 5 HP ALLEN BRADLEY POWERFLEX DRIVES (20±) ADJUSTABLE & FIXED LENGTH LUMBER PULL CARTS

STACKER 2007 MOCO 14 LH MECHANICAL LUMBER STACKER W/(4) 48 LOWERING ARMS, SECONDARY HOIST & PULL BACK, (3) ADJUSTABLE LATH PLACERS W/PACKER GATE (1/8 X1-1/4 X44 LATH), 12 4-STRAND 81X IN- FEED TRANSFER W/(4) STATION GRADE MARKING ROLLS, 18 4-STRAND 81X INFEED TRANSFER W/MOTOR TO SM CYCLO REDUCER, 10 POW- ERED OUTFEED JUMP ROLLCASE W/(5) 8-1/2 X60 ROLLS W/MOTOR TO SM CYCLO REDUCER, 28 OUTFEED ROLLCASE W/(11) 8-1/2 X60 ROLLS W/MOTOR TO REX REDUCER, ALLEN BRADLEY CENTERLINE 4-SECTION MCC W/(17) SWITCHES W/(2) 7-1/2 HP & (1) 2 HP ALLEN BRADLEY POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(2) ETHERNET, (2) AC INPUT, (4) AC OUTPUT & (2) DC INPUT MODULES, SERVO CABINET W/(7) REX ROTH INDRA DRIVES BANDER SIGNODE Z20VC44 PLASTIC BANDER STATION W/Z20 PLASTIC BANDING HEAD, S/N: 512587, TOP & SIDE SQUEEZE, BUMP GATE, PSD 119JSC BANDING FEEDER, 40 HP HYDRAULIC UNIT, 12 HYDRAULIC POWERED INFEED & OUTFEED ROLLCASES W/(6) 8-1/2 X60 ROLLS, 30 5-STRAND H78 INFEED & OUTFEED TRANSFERS, S-DRIVE W/MOTOR TO REX DRIVE, PAINT STATION, ROLL BACK, ALLEN BRADLEY PLC W/(1) ETHERNET, (1) DC INPUT, (1) AC INPUT, (3) ANALOG OUTPUTS, PRINTER & COMPUTER, (7) ROLLS OF 5/8 X 7010 METER HOG MONTGOMERY 18FS-RZF PUNCH & DIE TYPE HAMMER HOG, S/N: 226 W/TOSHIBA APPROX. 50 HP MOTOR, HORIZONTAL INFEED, BOTTOM DISCHARGE, UP TO 5 TPH CUBER - CONVEYOR RECONDITIONED WARREN & BAERG 250W CUBER (APPROX. 1-8 TPH CAPACITY), TOSHIBA 300 HP/1800 RPM MOTOR, TWIN AUGER MIXER, 11 SINGLE AUGER MIXER CONVEYOR, ALLEN BRADLEY SMC FLEX 150-F480NBD DRIVE, TRAMCO 6 X 24 X APPROX. 100 BULK FLO CONVEYOR, S/N: BF-1579 VIBRATORY CONVEYORS VIBRA PRO LS180900FS-1/4 (MS)107F-5HP, 18 X APPROX. 107 VIBRATORY CONVEYOR, S/N: 2338 VIBRA PRO LS90600FS-1/4 (MS)60F-5HP, 12 X APPROX. 60 VIBRATORY CONVEYOR, S/N: 2347 BINS APPROX. 40-UNIT HYDRAULIC OPERATED CHIP BIN W/20 HP HYDRAULIC UNIT APPROX. 24-UNIT CHIP BIN W/TRIPLE SCREW AUGER W/MOTOR TO SHAFT MOUNTED REDUCER BAGHOUSES - GRECON SYSTEM 1996 WESTERN PNEUMATICS 386 SANDER BAGHOUSE, S/N: FLT137-9619450, 40424 AIR TO CLOTH, MODEL 2020 ROTARY AIR LOCK, BAGHOUSE SWEEP W/PURGE FAN, 2008 CLARKES CP24 ABORT GATE, 2008 TWIN CITY 929-RBR-SW FAN & BLOWER, S/N: 08248083-2-1, TECO 200 HP/1800 RPM MOTOR, SPARE BAGHOUSE, PIPING CARTER DAY CLGI144-RH-120 TRIMMER BAGHOUSE, S/N: 7471, ROTARY AIR LOCK, BAGHOUSE SWEEP W/PURGE FAN, 2008 CLARKES CP24 ABORT GATE, 2008 TWIN CITY 929-RB0-SW FAN & BLOWER, S/N: 08248083-3-1, TECO 100 HP/1800 RPM MOTOR, SPARE BAGS, PIPING GRECON CC702 SPARE DETECTION & EXTINGUISHING SYSTEM W/DELUGE TANK, S/N: 3820 PACKAGE SAW 1990 HOLTEC STIHL ES121-F/SHK MOVABLE SAW UNIT, 6 METER UNIT LENGTH, 90 TILTING GUIDE BAR, 11 KW SAW MOTOR, 1.5 KW HYDRAULIC DRIVE, APPROX. 12 X25 CLEANOUT CONVEYOR PLANER MILL ELECTRICAL 2013 SIEMENS 3000 AMP 3-SECTION MAIN 2014 GE SPECTRA SERIES 3000 AMP 3-SECTION MAIN ALLEN BRADLEY INTELLICENTER 9-SECTION MCC W/(41) SWITCHES W/(2) ALLEN BRADLEY DRIVES ALLEN BRADLEY INTELLICENTER 8-SECTION MCC W/(19) SWITCHES W/(7) ALLEN BRADLEY DRIVES ALLEN BRADLEY INTELLICENTER 7-SECTION MCC W/(29) SWITCHES W/(2) ALLEN BRADLEY DRIVES ALLEN BRADLEY INTELLICENTER 7-SECTION MCC W/(27) SWITCHES W/(6) ALLEN BRADLEY DRIVES ALLEN BRADLEY INTELLICENTER 7-SECTION MCC W/(19) SWITCHES W/(7) ALLEN BRADLEY DRIVES ALLEN BRADLEY INTELLICENTER 6-SECTION MCC W/(15) SWITCHES W/(5) ALLEN BRADLEY DRIVES ALLEN BRADLEY CENTERLINE 5-SECTION MCC W/(22) SWITCHES W/(6) ALLEN BRADLEY DRIVES ALLEN BRADLEY CENTERLINE 4-SECTION MCC W/(17) SWITCHES W/(3) ALLEN BRADLEY DRIVES (8) ALLEN BRADLEY SMC FLEX DRIVES TO 300 HP (3) 2013 ALLEN BRADLEY LOGIX 5571 PLC S ALL MCC S & PLC S ARE DEVICENET NETWORK ENABLED CONVEYORS TRAMCO 6 X 24 X APPROX. 100 BULK-FLO CONVEYOR, S/N: BF-1579 APPROX. 112 6 X11-1/2 BOX CHAIN W/FLIGHTS COVERED CONVEYOR, S-DRIVE, SKK 7-1/2 HP/68 RPM DRIVE APPROX. 100 6 X11-1/2 BOX CHAIN W/FLIGHTS CONVEYOR, S-DRIVE, SKK 10 HP/68 RPM DRIVE APPROX. 12 X18 CLEATED BELT CONVEYOR W/BALDOR MOTOR TO REDUCER NUMEROUS TRANSFERS MILL SUPPORT EQUIPMENT & SUPPLIES MILLERMATIC 252 MIG WELDER, DIALARC 250 AC/DC WELDER, OXY/ ACETYLENE SET, ROD BOX, 2009 GRIZZLY G7948 DRILL PRESS, DEWALT DW718 DOUBLE BEVEL COMPOUND MITRE SAW, RYOBI BS903 VERTICAL BANDSAW, MAKITA 2414 14 CHOP SAW, SIGNODE RECHARGEABLE STRAPPER, (4) SIGNODE BANDING CARTS, SPARE POLY BANDINGS, STIHL HT56C GAS POLE SAW, CENTRAL HYDRAULIC 2-TON PALLET JACK, PORTA POWERS, DEEP CUT BANDSAW, WORM DRIVE SAW, AIR DRIVES, SOCKETS & WRENCHES, POWER TOOLS, GANG BOXES, (3) PORTA COOL EVAP COOLERS, (10) FLOOR FANS, (10) LADDERS, (2) ROLLING WAREHOUSE LADDERS, COME-ALONGS, CHAINS & RIGGING, CLAMPS, CONDUIT BENDERS, FLOORJACKS, VISES, STEEL TABLES, WHEEL PULLERS, ELECTRIC & HOSE REELS, PORTABLE HEATERS, EYEWASH STATIONS, FLAMMABLES CABINETS, CAMERAS, INTERCOMS, MILL CHAIN, SPROCKETS, CYLINDERS, HOSE, BELTS & BELTING, FILTERS, ELECTRICAL, BINS & PART TRAYS, STEEL STOCK & RACKS PLANER MILL ROLLING STOCK 2009 DOOSAN D160S-5 FORKLIFT, 22,550 LB CAPACITY, DIESEL, 177 2-STAGE 8 FORKS, DUAL PNEUMATIC TIRES, ENCLOSED CAB, HOUR METER READS: 16,572, S/N: LQ00259 2009 DOOSAN D160S-5 FORKLIFT, 22,550 LB CAPACITY, DIESEL, 177 2-STAGE 8 FORKS, DUAL PNEUMATIC TIRES, ENCLOSED CAB, HOUR METER READS: 19,589, S/N: LQ00258 2007 DOOSAN G70S-5 FORKLIFT, 12,200 LB CAPACITY, PROPANE, 217 METER READS: 7,713, S/N: PG0019 METER READS: 10,009, S/N: PG00111 METER READS: 12,286, S/N: PG00112 METER READS: N/A, S/N: PG00113 2001 HYSTER S100XL2 FORKLIFT, 9,200 LB CAPACITY, PROPANE, 184.3 3-STAGE MAST W/SIDE SHIFT, 48 FORKS, SOLID TIRES, HOUR METER READS: 3,692, S/N: D004D10801Y CLARK C500Y FORKLIFT, 14,025 LB CAPACITY, GAS ENGINE, 173 2-STAGE MAST W/FORK POSITIONERS, SIDE SHIFT, 8 FORKS, DUAL PNEUMATIC TIRES, S/N: Y105-104-58900B FLEXCO 6 CLAMP FORKS, SPARE TIRES, DUMPSTERS AUCTIONEERS NOTE: Preview will be on Tuesday, April 11th for both locations. To schedule an early preview it is required that you contact our Portland office at 503.463.4444 or email: tifni@murphyauction.com Both locations will be sold by photo at their respective locations. Day 1 - April 12 - Sawmill 77200 POLELINE ROAD, BOARDMAN OR 9AM Auction Start Time Day 2 - April 13 - Abrasive Sander MIll 71410 E COLUMBIA AVE, BOARDMAN OR 9AM Auction Start Time Preview of equipment will be made available during the auction. TERMS AND CONDITIONS 10% BUYERS PREMIUM ON ALL ITEMS 13% BUYERS PREMIUM ON ALL ONLINE PURCHASES Due to insurance and safety reasons, children under 12 cannot be admitted PAYMENT: Full payment must be made by no later than 4 pm, April 14th. Payment must be made by CASH, CASHIERS CHECK, WIRE TRANSFERS, MASTERCARD OR VISA ONLY. Checks are accepted ONLY with Bank Letter of Guarantee. REMOVAL: No purchases may be removed during the auction unless announced by the auctioneer. Small items must be removed by 4:00 PM, Friday, April 21st. ALL EQUIPMENT MUST be removed no later than 4:00 PM, Friday, August 18th, 2017. (REMOVAL HOURS AND DEADLINES MAY BE MODIFIED BY AUCTIONEER S ANNOUNCEMENT). Removal hours: 8:00 AM 4:00 PM, Monday through Friday. NO WEEKEND OR HOLIDAY REMOVAL. Upon award of bid buyers and/or their contractors take responsibility for any environmental issues they create (e.g. spilled hydraulic oil). Dismantlers are required to provide their own materials to contain & clean up any oil spillage. Insurance: Dismantlers, contractors or buyers removing equipment are required to provide $2,000,000.00 dollar General Liability Insurance certificate showing the James G Murphy Company and Upper Columbia Mill as the additional insured parties. Insurance certificate and proof of workman s compensation compliance must be on file at sale site or with the James G Murphy Co. FIRE PROTECTION POLICY: NO CUTTING WITHOUT A PERMIT - Dismantlers required to provide their own fire hose & spray nozzles. - A signed burning permit issued to dismantlers will be displayed in cutting area - A limited number of burning permits will be issued. One burning permit per hose. - Each man using a cutting torch will have one firewatch with a hose while cutting - Firewatch to wet down before during and after cutting. - Firewatch to stay in area one hour after cutting is completed - Cutting hours will be announced at the auction Warranty Disclaimer: ALL SALES ARE FINAL. All items are being sold As Is, Where Is, With All Faults and without any warranties as to merchantability of fitness for a particular purpose. The principal, the auctioneer, the advertising coordinator, and any of their agents makes no express or implied warranties of any type. All information was obtained from sources deemed reliable. Although every precaution has been taken to ensure accuracy, the principal, the James G Murphy Co., the advertising coordinator, and all of their agents shall not be responsible for any errors or omissions therein. Announcements made by the auctioneer at the time of sale take precedence over printed matter. Auctioneer reserves the right to sell accessories parts or attachments on a separate and/or aggregate basis ABSENTEE BIDS: Absentee bids will be accepted with 25% Deposit.

1.800.426.3008 503.463.4444 425.486.1246 - murphyauction.com James G. Murphy Co. Commercial & Industrial Auctioneers P.O. Box 82160, Kenmore, WA 98028 PRESORTED FIRST CLASS MAIL U.S. POSTAGE PAID SEATTLE, WA PERMIT NO. 963 503.463.4444 425.486.1246 murphyauction.com NO MINIMUMS - NO RESERVES PUBLIC AUCTION UPPER COLUMBIA MILL DAY 1 SAWMILL 9AM - WEDNESDAY - APRIL 12 77200 POLELINE ROAD, DAY 2 ABRASIVE SANDER MILL 9AM - THURSDAY - APRIL 13 71410 E COLUMBIA AVE,