130 130
Simple elegant designs in the Edge Lighting ceiling collection easily adapt to any decor. The fixtures with indoor/outdoor and ceiling/wall options, provide multitask lighting for various applications. ceiling 131 131
SATIN CEILING 1.15" (2.9cm) 0.6" (1.5cm) 3" (7.6cm) 1.25" (3.18cm) 3.15" (5cm) 1" (2.5cm) 3.5" (8.9cm) 6.75"ø (17.15cm) 6.3"ø (16cm) 11.75"ø (10.95cm) 10.95"ø (27.8cm) 14.75"ø (37.5cm) 13.9"ø (35cm) 17.75"ø (45cm) 16.8"ø (42.6cm) 7 Inch 12 Inch 15 Inch 18 Inch Satin series provides general light distribution through white frosted glass, which is surrounded by satin nickel trim. The 15" and 18" fluorescent versions are also available with an emergency light option (F1E). The 7" is only available in a halogen version. Diffuser White Body Finish total wattage Satin Nickel Halogen (): Included 7-75 Watt Type T3-78mm 12-200 Watt Type T3-118mm 15-250 Watt Type T3-118mm 18-300 Watt Type T3-118mm 7-75W 12-200W 15-250W 18-300W Fluorescent (F1 or F1E): Included 12F1-22 Watt Type T5 Circline/ 2GX13 base, 3500K 15F1 - (22+40) 62 Watt Type T5 Circline/2GX13 base, 3500K 18F1 - (22+40) 62 Watt Type T5 Circline/2GX13 base, 3500K 15F1E - (22+40) 62 Watt Type T5 Circline/2GX13 base, 3500K 18F1E - (22+40) 62 Watt Type T5 Circline/2GX13 base, 3500K 12F1-22W - 3500K 15F1/F1E - 62W - 3500K 18F1/F1E - 62W - 3500K Dimming information Halogen (): Incandescent Fluorescent (F1 or F1E): Not Dimmable (Electronic Ballast) satin size 7 7 7" 12 12" 15 15" 18 18" Finish SN Halogen SN Satin Nickel F1 Fluorescent F1E Fluorescent Emergency (15" or 18" only) 3 277V 60Hz VANILLA SKY SQUARE 14" (35.6cm) 14" (35.6cm) 1" (2.5cm) 1.75" (4.4cm) 9.5"ø (24cm) 17.75" (45cm) 17.75" (45cm) 1.7" (4.3cm) 9.5"ø (24cm) 24" (61cm) 23.5" (60cm) 2.5" (6.35cm) 15.5"ø (39.4cm) Vanilla Sky Square ceiling series features molded square white glass diffusers in various sizes providing general light distribution. The 14" fixture includes a halogen, while the 18" and 24" include energy saving Krypton/Xenon s. All three sizes are also available in fluorescent versions. Diffuser total wattage White Halogen (): Included 14 100 Watt Type T3-118mm 14-100W Energy Efficient Krypton/Xenon (K1): Included 18K1-180 Watt (equivalent to 250 Watt Halogen) Type T4-118mm 24K1-180 Watt (equivalent to 250 Watt Halogen) Type T4-118mm 18K1-180W = 250W 24K1-180W = 250W Fluorescent (F1): Included 14F1 2x9 Watt Type T4/2G7 base, 2700K 18F1 2x26 Watt Type T4/G24Q-3 base, 3000K 24F1 2x26 Watt Type T4/G24Q-3 base, 3000K 14F1-18W - 2700K 18F1-52W - 3000K 24F1-52W - 3000K INFORMATION Halogen (): Incandescent Krypton/Xenon (K1): Incandescent Fluorescent (F1): Not Dimmable (Electronic Ballast) VSKY Description SQ SQ Square size 14 14 14" 18 18" 24 24" Halogen (14" only) K1 Krypton/Xenon (18" or 24" only) F1 Fluorescent 3 277V 60Hz (F1 only) 132
VANILLA SKY ROUNd 0.9" (2.3cm) 13.75"ø (35cm) 9.5"ø (24cm) 1.65" (4.2cm) 17.5"ø (44.5cm) 12"ø (30cm) 1.825" (4.6cm) 2.175" (5.5cm) 23.25"ø (59cm) 15"ø (23.25cm) Vanilla Sky Round ceiling series features molded round white glass diffusers in various sizes providing general light distribution. The 14" fixture includes a halogen, while the 18" and 24" include energy saving Krypton/Xenon s. All three sizes are also available in fluorescent versions. Diffuser total wattage White Halogen (): Included 14 100 Watt Type T3-118mm 14-100W Energy Efficient Krypton/Xenon (K1): Included 18K1-180 Watt (equivalent to 250 Watt Halogen) Type T4-118mm 24K1-180 Watt (equivalent to 250 Watt Halogen) Type T4-118mm 18K1-180W = 250W 24K1-180W = 250W Fluorescent (F1): Included 14F1 2x9 Watt Type T4/2G7 base, 2700K 18F1 2x26 Watt Type T4/G24Q-3 base, 3000K 24F1 2x26 Watt Type T4/G24Q-3 base, 3000K 14F1-18W - 2700K 18F1-52W - 3000K 24F1-52W - 3000K INFORMATION Halogen (): Incandescent Krypton/Xenon (K1): Incandescent Fluorescent (F1): Not Dimmable (Electronic Ballast) VSKY Description RD RD Round size 14 14 14" 18 18" 24 24" Halogen (14" only) K1 Krypton/Xenon (18" or 24" only) F1 Fluorescent 3 277V 60Hz (F1 only) 133
Garbo ceiling/wall 12" (30.5cm) 12" (30.5cm) 3.7" (9.4cm) Garbo /Wall features opal white polycarbonate diffusers in a slim square metal frame providing general and vanity multidirectional light distribution. For additional wall versions see p. 142. ADA compliant. DIFFUSER FINISH Opal White Polycarbonate Satin Nickel or Polished Nickel Fluorescent (F1): Included 2x9 Watt Type T4/2XG7 base, 2700K Fluorescent (F2): Included 4x9 Watt Type T4/2XG7 base, 2700K total wattage F1-18W - 2700K F2-36W - 2700K INFORMATION Fluorescent (F1 or F2): Not Dimmable (Electronic Ballast) TYPE description size garbo C SQ 12 C SQ Square 12 12" F1 F1 Fluorescent F2 Fluorescent Finish sn SN Satin Nickel PN Polished Nickel 3 277V 60Hz 134
Cube-o LED Indoor/Outdoor SIDE VIEW CANOPY* 4.375" (11cm) 4" (10cm) TOP VIEW 4.375" (11cm) CANOPY*.5" (1.25cm) 3" (7.62cm) *Includes detachable canopy, which is required for outdoor/shower installation 3.5" (8.9cm) 4" (10cm) Cube-O ceiling/wall features a white frosted diffuser tube enclosed in aluminum housing for general light distribution. The detachable square canopy is required for outdoor and wet location installations. Available in a halogen or LED version, Cube-O is rated for indoor, outdoor, and wet locations. ADA compliant. All LED fixtures include 5 year warranty. Diffuser FINISH White Satin Aluminum Halogen (): 60 Watt Type JCD G9 base Bi-Pin LED (L1): 6.1 Total Watts, 12VAC LED, 2888K, 82CRI, 269 lumens, 44 lumens per watt; 70% lumen maintenance based on 50,000 hours of operation total wattage - 60W L1-6.1W INFORMATION Halogen (): Incandescent LED (L1): Not Dimmable cubeo Halogen L1 LED Finish sa SA Satin Aluminum ROCKY CEILING Indoor/Outdoor Rocky is a ceiling mount accent and general downlight, featuring high temperature silicone o-rings that create a watertight seal. Machined from marine grade 316 stainless steel or 6061 aluminum brushed to a satin finish. Rocky is available in Low Voltage () and Line Voltage (H2) halogen versions. A removable, lockable shield with fasteners retains a glass lens and a louver accessory. It is rated for indoor, outdoor, and wet locations. FINISH : Brushed Stainless Steel H2: Satin Aluminum Halogen (): Included 20 Watt MR16 GU5.3 base Halogen (H2): Included 35 Watt Line Voltage MR16 (PAR16) GU10 base total wattage - 20W - 12V H2-35W - 120V 4.5" (11.4cm) INFORMATION Halogen (): Low Voltage Electronic Halogen (H2): Incandescent 3.2" (8.1cm) roc type C C Halogen FINISH SS SS Stainless Steel 2.3" (5.8cm) roc type C C H2 H2 Halogen FINISH SA SA Satin Aluminum 135
sun3 Wet Location Recessed Downlight Indoor/Outdoor 3" (7.62cm) 3.3" (8.38cm) 3.3" (8.38cm) Description: The 3" round or square recessed SUN3 LED downlight uses a high-powered warmwhite LED; it features a 16, 23, 36 or 47 degree precise focus and tempered glass lens with marine-grade aluminum beveled edge trim. It is perfect for installation on ceilings with a low clearance (3.2" depth). SUN3C is rated for outdoor wet location, shower or indoor applications. New construction IC-Rated housing with dimmable electronic power supply (SUN3-HS) is sold separately. Fixture includes 5 year warranty. Finish: Satin Aluminum : 7 Total Watts, 12VAC LED, 2858K, 85 CRI, 322 total lumens, 46 lumens per watt; 70% lumen maintenance based on 50,000 hours of operation Dimming Information: Dimmable with low voltage electronic dimmer using SUN3-HS (sold separately). Lutron dimmers recommended: Dims to 12% with Diva #DVELV-300P and with Skylark #SELV- 300P; 20% with Maestro #MAELV-600 Recessed Housing (Cut Hole) 120V Power Supply/Driver Plaster Plate Flange Tether SUN3C Lens/ BEAM SPREAD Input volts WATTS equivalent TO 25 watt MR16* CBCP rated LIFE COLOR TEMP (K) CRI L1 = 16 Degree 12VAC 7 25W 2,029 50,000 2,812 80 L2 = 23 Degree 12VAC 7 25W 1,216 50,000 2,812 80 L3 = 36 Degree 12VAC 7 25W 570 50,000 2,812 80 L4 = 47 Degree 12VAC 7 25W 385 50,000 2,812 80 Beam Angle 16 Beam Angle 23 DIST. FC DIA 2 621 10" 3 310 11" 4 156 13" 6 77 16" 8 39 22" 10 31 26" DIST. FC DIA 2 323 11" 3 202 15" 4 82 19" 6 50 25" 8 20 33" 10 16 41" DIA. DIA. Beam Angle 36 Beam Angle 47 DIST. FC DIA 2 147 15" 3 103 19" 4 37 24" 6 23 31" 8 10 44" 10 7 51" DIST. FC DIA 2 76 22" 3 48 30" 4 19 39" 6 12 59" 8 5 78" 10 4 96" DIA. DIA. * All testing done by Energy Star Benchmark Tool: /products/lighting_tools.php 136
120V HOT (BLACK) SWITCH OR LOW VOLTAGE ELECTRONIC DIMMER SUN3C SUN3C SUN3C SUN3C 120V NEUTRAL (WHITE) 120V 120V 120V 120V 7W LED 7W LED 7W LED 7W LED Sun3 led COMPONENTs Use the SUN3 LED indoor or outdoor as a wet location, shower or recessed downlight. IC Housing Low profile (3.2") housing includes electronic low voltage dimmable power supply. New construction rated for insulated ceilings. 3 ø HOLE (7.62cm) 3.2 (8.13cm) 6.69 (17cm) 5 (12.7cm) 7.47 (19cm) Color Product HEAD/ LENS DESCRIPTION Temperature FINISH Sun3C hdl1 RD WW SUN3C Sun3 HDL1 16 Degree HDL2 23 Degree HDL3 36 Degree HDL4 47 Degree RD Round SQ Square WW Warm White SA SA Satin Aluminum Product Sun3 SUN3 Sun3 TYPE Hs HS Housing Hexcell Louver eliminates glare from the light beam. SUN3 Louver Lens Holder Louver Lens Holders secure onto front of the holding up two lenses or combination of a hexcell louver and lens. Required for securing louvers, lenses and filters in the SUN3. L016 MR16 Product Lo16 H TYPE H Hexcell PRODUCT SUN3 SUN3 Sun3 TYPE LLH LLH Louver Lens Holder 20D ND Dichroic Film lenses and filters shape beam, change color or adjust color temperatures. Louver lens holder SUN3-LLH required. 20K RD BL Product LF2 LF2 Lens Film 2" diameter TYPE 20D 20D Refracts beam 20 down 20K Dichroic 2000K Very Warm White 27K Dichroic 2000K + Color Correction Film=2700K Warm White ND Neutral Density Filter dims 50% RD Dichroic Red Film BL Dichroic Blue Film LS Linear Spread 137