MKTG 2016
Harshenvironments OUTDOOR Solutions manufacturedfrom mildsteelor aluminium alloy Single or double wall STAINLESS STEEL Modular cabinets Monobloc and compact enclosures Wall-mountingboxes Terminal boxes Monobloc control desks Suspension arm system EMC Cabinet Wall-mountingboxes Terminal boxes
Solutions for outdoor applications E VIS
E VIS solutionsfor outdoor applications Perfect protectionof the internalcomponentsby environmental factors, extreme temperatures, direct sunlight, harshenvironments, vandalismand atmospherical, chemical and mechanical agents. Natural ventilation Thermal management Special insulation on request Technical support for the choice of the most proper ventilation/conditioning unit
Wide range Monobloc structure manufactured from mild steel, aluminiumalloyor stainlesssteel(on request). Special manufacturing concept(single or double-wall) Silicone gasket Special paint finish Mild steel: epoxy-polyester resin primer and second polyester layer with anticorrosion pigments / Aluminiumalloy version: Special painting processwitha single polyester powder coating with zinc base (RAL7035 smooth for the cabinet, Pantone 2717U smooth for roof and plinth).
Manufacturing concept Single wall Double wall
Technical close-up Thanks to a new design, the side covers are assembled and secured without any screw. Double-walled frontal door + louvers on the roof + natural ventilation for an easier thermal management of the enclosure
Technical close-up Only 3 screws are needed to assemble the hinged roof to the monoblocstructure. No point of access from outside when the door is closed. Locking system with key. Big cable entry and fast assembly of the plinth frontal crosspiece for easy wiring
Stainless steel solutions
Specificmaterialand finishing for eachapplication OUTDOOR INDOOR Off-shore Harsh environment Food processing Washing/ High T Pharma Dust Industrial Dust Mild steel Stainless steel AISI316L Stainless steelaisi304l Mild steel Mild steel Double layer of special powder coating for mild steel: epoxy-polyester resin primer and second polyester layer with anticorrosion pigments (RAL7035 smooth for the cabinet, Pantone 2717U smooth for roof and plinth)
Ourplus Solutions in AISI304L or AISI316L complyingwith EN 12944, for specificenvironmentsc3 (urbanand industrial), C4 and C5 (industrial and marine), or for potentially explosive atmospheres.
Specificmanufacturing concepts SILICON SEAL Resistant to most detergents, hot water jets and easy to clean. Optimal environmentconditionsfor use: -50 < T < + 200 C DOORS WITH FORMED CORNERS Pre-satin AISI304L / AISI316L stainless steel AISI316L STAINLESS STEEL COMPONENTS Hingesand screwsin contactwith externalenvironmentsare manufacturedfrom stainlesssteel. Orthogonal joints laser-welded to E NUX cabinet structure PRE-SATIN MATERIAL PVC protective layer and special packaging
Electrical enclosures ATEX E NUX E COR
Certificationand classification 1) Evaluation of ETA technical book 2)Conformityof the technicalbook 3) Certification by TUV 1) System certificationof the processesrelatedto AtExproducts, complying with ISO 80079-34 2) CE test 3) CE certification for empty enclosures (certificate IMQ10 atex 037 U)
Stainless steelsuite cabinets E NUX
Technical features E NUX manufacturing concepts Available in AISI304L and AISI316L Orthogonal joints manufactured from AISI316L stainless steel and laser welded to the structure EUPA mounting plate, EUFX side panels, EUZX modular plinth and standard E NUX accessories Protection rating: IP55, Nema 12, IK10 On request: cabinet with single blankdoor, in stand-alone or joinedin a suite with IP>55 or Nema 4X
Wide range Standard dimensions availablewith: -single blankdoor(12 dimensions) -double blankdoor (4 dimensions) -plexidoor (12 dimensions) Further dimensions availableon request
Accessories Plexi door EUFX side panels EUZX modular plinthor with integratedcorners 180 hinges Sharedwith E NUX mildsteel: EUPA front inserted mounting plate EUPL side inserted mounting plate WE inserts for locking system Inner accessories
Stainless steel monobloc cabinets E MOX
E MOX monobloccabinets Monobloccabinet suppliedwith front inserted mouting plate Offeredin 12 standard dimensionswith single door and 3 with double door Completelycompatiblewith ETA standard accessories, thanks to the optional inner uprights Manufactured from AISI304L or AISI316L stainless steel Protectionrating: IP66 (single door), IP55 (double door) -Nema 12 -IK10.
Accessories EUPA mounting plate EUPR partial mounting plate WE locking systems EUZX plinth with integrated corners EUMI inner uprights to guarantee compatibility with ETA accessories
Stainless steel compact enclosures E COMP
E COMP compact enclosures For free-standing and wall-mounting applications Offered in 12 standard dimensions Completelycompatiblewith ETA standard accessories Manufacturedfrom AISI304L or AISI316L stainless steel Protectionrating: IP55 -Nema 12 -IK10.
Accessories E MOX lifting eyebolts E COR wall-mounting brackets WE locking systems EUZX plinth with integrated corners
Stainless steelwallmounting boxes E COR
E COR stainlesssteelwallmountingboxes Completely welded enclosure body without cable entry and supplied with mounting plate provided with slots in the corners. Door with formed corners and silicone seal, with a reduced dimension of the door angle, in order to permit the door opening in case of E COR boxes placed side by side. Wide range of accessories (wall-mounting brackets, inner door, modular chassis, DIN profiles, rain canopy, hygienic design locking system and plinth to be ordered separately). Protection rating: IP66, Nema 4X (single door) - Nema12 (double door or plexidoor), IK10.
Wide range 27 standard dimensionswith blankdoor (single or double) + 7 standard dimensions with plexi door.
ST-EEX and ECOR-EEX electrical enclosures Enclosure without cable entry, provided with: door with polyurethane gasket, mounting plate, locking system with zinc body and stainless steel lever, & welded external stud. 25 standard dimensions available with single blank door. Protection rating: IP66, Nema4 (ST) e Nema4X (ECOR), IK10 Ex II 2G Ex e IIC Gb Ex II 2GD Ex tbiiic Db
ECOR-TX solutionswith sloped roof E COR manufacturing concept Completely welded body with cable entry and mounting plate Sloped roof, specifically designed for applications in Food industry 7 standard dimensions available with blank door Protection rating: IP66, Nema 4X, IK10.
Accessories Outdoor application: Rain canopy provided with ventilation louvers Easy installationof of the components: frame for DIN guides and panels, inner door Cable glandsfor food,, outdoor or harsh environments Hygienicdesign for foodor or harsh environments: lockingsystemwith special gasket
Stainlesssteel terminal boxes, pushbuttonboxes and control desks E GRAN SHX ZBX / AEX / MEX / LEX / PEX
E GRAN terminal boxes Boxes suppliedwith screwedcover providedwith formedcorners and silicone gasket 6 standard dimensions Protection rating: IP66, Nema 4X, IK10 Innovative lockingsystemwith ¼ turn self-captive screws
E GRAN terminal boxes Boxes suppliedwith screwedcover providedwith formedcorners and silicone gasket 6 standard dimensions Protection rating: IP66, Nema 4X, IK10 Innovative lockingsystemwith ¼ turn self-captive screws
SHX push-buttonboxes Push-buttonboxes suppliedwith blankor punchedcover (for buttonsø 22,5mm), screwed to the body and supplied with formed corners and silicone corners. 4 standard dimensionswith blankcover 6 standard dimensions with punched cover Protectionrating: IP66/IP69K, Nema 4X, IK10
Monoblocand modular control desks ZBX = 4 standard dimensions D=400mm AEX = 4 standard dimensionsd=400 mm Protection rating: IP55, Nema12.
Stainless steel suspension armsystem E RAM
E RAM suspensionarmsystem Housing manufactured from AISI304L and suspension arm system for industrial applications: 4 standard dimensionsfor the housing, suppliedwith door with silicone seal 4 versionsof suspensionarm(i L -J S) Wide rangeof differentjoints(fixed/rotating) to be easily assembled by the user Protection rating (approval pending): IP66/IP69K, Nema 4X, IK10 for housing
Solutions for EMC applications E NUX ST SD
EMC testedsolutions The EC Directive on electromagnetic compatibility applies to equipment and units that can generate/ receive electromagnetic waves and liable to cause interferences, altering the correct functioning of electronic equipment installed in the cabinets. ETA EMC cabinets and boxes galvanized on both sides and painted only externally go beyond the dispositions of the Directive, but they can act as a barrier of the electromagnetic waves which propagate from the internal and external source and have been tested @ NEMKO SPA.