SLIMLINE BROCHURE
As a world class manufacturing company Surelock McGill maintains its market leading position by continuing to design, develop, test and achieve third party certification on it s products to meet and exceed the ever changing requirements of National, European and International standards. SLIMLINE The new Slimline is a prime example of the company's philosophy and attitude towards continual product improvement. The new design has greatly improved the overall performance of the locking system and provided additional features/benefits many of which have been driven by customer demands or ever increasing expectations of security, fire, ballistic, blast and safety standards throughout the world. SLIMLINE - WHAT S NEW Removed the solenoid bulge improving overall appearance Slimmer mm profile for mortice fitted applications Three methods of securing the cylinder guard Surface Standard Fixing Surface Bolt Through Fixing Mortice Bolt Through Fixing Cast stainless steel bolt guides to suit M8 stainless steel fixings Secure 'Plug-in connector for access control and/or monitoring applications Improved spring design reducing release force, yet stronger and smoother Bolt enhancement packs for greater security and blast resistance Modern Appearance New aluminium white RAL 9006 paint finish New SAA panic plate, push pad and brushed stainless steel lever handle Plug-in connector RANGE PERFORMANCE OVERVIEW SECURITY FIRE BLAST BALLISTICS PANIC EXIT EMERGENCY EXIT Successfully tested on a wide range of LPS 1175 Security Rating,, 4, 5 and 6 doorsets. Successfully tested on BS 476 part :1987 and EN 164 part 1 doorsets (Certifire accredited) and UL10C doorsets (UL certified). Successfully blast tested on doors in accordance with the methodology set out within ISO 169 EXV15 & EXV5, utilising the hazard rating as defined for Walls and Doors. Successfully tested on doorsets to BS EN 15:1999 FB1-FB7 inclusive and FSG. Panic Exit Independently type tested to BS EN 115: 008 and UL05, CE marked and UL certified. Emergency Exit Independently type tested to BS EN 179: 008, CE marked.
SLIMLINE PRODUCT COMPARISON CLASSIC NEW SLIMLINE Standard Fixing Standard Fixing Surface Bolt Through Fixing Mortice Bolt Through Fixing Three methods of securing the cylinder guard Removed the solenoid bulge improving overall appearance 7MM Slimmer mm profile for mortice fitted applications MM Stainless steel cast bolt guides to suit M8 stainless steel fixings Modern silver appearance Improved spring design reducing release force, yet stronger and smoother Bolt enhancement packs for greater security and blast resistance - 15mm and 5mm bolt sizes available Secure 'Plug-in connector for access control and/or monitoring applications
Assessed to ISO 9001:008 LPCB Cert No. 516-1 MANAGEMENT SYSTEMS SLIMLINE: PANIC & EMERGENCY BOLTING High Performance Multi-point bolting mechanism that provides automatic bolting upon door closure offering high security protection with ballistic and blast resistance in one product. The design of the product enables the opportunity to escape using panic panic plate/pad or lever handle operation. Optional security rated external key entry function available. The Slimline Range has been designed with a common fixing footprint, enabling other alternative modules to be retro-fitted to meet future changes in operational requirement later. OPERATIONS Exit - Slimline panic & exit devices are operated using either lever handle, emergency push pad or full width panic plate to facilitate the single handed means of escape. Upon door closure the bolts will automatically engage and fully secure. Optional Entry - External key via LEO secure locking handle (see Leo devices in Ancillary items) FEATURES Surface mounted or mortice fitted solutions Automatic bolting upon door closure Proven rack & pinion mechanism 15mm x 5mm throw stainless steel bolts Choice of exit device operators Non-handed and bi-directional Tested to over 1,000,000 cycles Suitable for doors.m high and extensions available for taller doorsets Optional Bolt Enhancement packs available for blast applications Optional bolt status monitoring available BENEFITS Automatic bolting Life safety device BSEN 179/115 and UL05 compliant Tested on specific doorsets up to LPS 1175:6 Door securely bolted when in closed position Optional remote monitoring of bolt status Engineered for longevity and trouble free service LPS 1175 SECURITY RATING (on selected doorsets) 4 5 6 Blast - For details contact our Technical Dept EN15/ FB1- FB7 & FSG EN115/EN179/UL05 BS476 PT/EN164-1/UL10C - up to 4 hours Above performance results are based on independent third party testing or assessment on selected doorsets SEISMIC TESTED TESTED TO OVER 1,000,000 CYCLES ENTRY METHODS: LEO EXIT METHODS: Panic Plate (meets EN115) Push Pad (meets EN179) Cranked Silver Lever (meets EN179)
91.5 89 15 SLIMLINE: PANIC & EMERGENCY BOLTING TECHNICAL DRAWINGS 9.5 46.75 66 146 76.5 SELF-CODING SYSTEM The Slimline (SL) modular devices have a simple ordering code that covers the chosen methods of entry and exit, followed by additional enhancements to further customise the device. The device is easy to specify: Step 1. Bolt configuration Step. Choose the required entry code Step. Choose the required exit code Step 4. Select handing and opening direction Step 5. Select enhancements to customise and suit specific requirements STEP 1 STEP STEP STEP 4 STEP 5 Number of bolts Entry Exit Handing -point securing -point securing 0 No Entry Provision 4 5 6 Panic Plate Emergency lever Emergency push pad 1st Digit 0 Surface Mounted 1 Mortice Fitted nd Digit 0 Non-handed 4 Right Hand, open out 5 Left Hand, open out 57 Right Hand, open in 8 Left Hand, open in D1 L1 W Enhancements 15mm bolts with enhanced-level guides Recessed LEO (flush fitting) Surface fixing by machine screws LEFT HAND (LH) #8 INWARD OPENING HANDING CODES Example system code: DEVICE BOLTS ENTRY EXIT HANDING ENHANCEMENTS SL 0 4-00 - W OUTWARD OPENING HANDING CODES LEFT HAND (LH) #5 RIGHT HAND (RH) RIGHT HAND (RH) # TO BE REPLACED WITH: 0 FOR SURFACE MOUNTED - 1 FOR MORTICE FITTED The code SL04-04-W specifies the Slimline point with no entry provision and panic plate exit device from inside. The enhancement codes specify surface fixing by machine screws (W). Note: The code '00' specifies surface mounted and non-handed. #4 #7 SLIMLINE: PANIC & EMERGENCY SYSTEM - POPULAR ENHANCEMENTS AVAILABLE CODE ENHANCEMENT -D1 15mm bolts with enhanced-level guides -D 5mm bolts and high-level guides (stainless steel) -L LEO - external key-entry lock with internal emergency override - surface mounted -L1 -L -L4 -O1 Cylinder - Kaba-0 (registered) -O Cylinder - Assa Twin Combi 5800 - (choice for registration) -O5 Cylinder Medeco ARX (registered) -O4 Surelock Cylinder -P4 -Q4 Resistance to bolt end-thrust attack For full list of enhancements please see page at the end of this document
Assessed to ISO 9001:008 LPCB Cert No. 516-1 MANAGEMENT SYSTEMS SLIMLINE: KEY RELEASE LOCKING High Performance Multi-point locking mechanisms providing automatic locking upon door closure offering high security protection, ballistic and blast resistance in one product. The flexible design of the product enables external key access whilst facilitating the ability to escape through the locked door in situations where panic or emergency means of escape are required. The Slimline Range has been engineered with a common fixing footprint, enabling other alternative modules to be retro-fitted to meet future changes in operational requirement later. Shown with optional cylinder guard protection OPERATIONS Entry - External mechanical key and lever handle is used to release the deadlock function and retract the bolting system. Upon door closure the bolts will automatically engage and deadlock. Exit - A single handed means of escape is provided by either lever handle, push pad or full width panic plate. A further alternative method of egress can be provided by key or thumbturn & lever handle operation. FEATURES Surface mounted or mortice fitted solutions Automatic locking upon door closure Manual locking option available Proven rack & pinion mechanism 15mm x 5mm throw stainless steel bolts Choice of exit device operators Tested to over 1,000,000 cycles Suitable for doors.m high and extensions available for taller doorsets Alternative direction & additional auxiliary bolts can be added Optional Bolt Enhancement packs available for blast applications Optional remote monitoring of lock/bolt status BENEFITS Automatic relocking as standard Tested on specific doorsets up to LPS 1175:6 Life safety device BSEN 179/115 and UL05 compliant Door securely locked when in closed position Engineered for longevity and trouble free service LPS 1175 SECURITY RATING (on selected doorsets) 4 5 6 Blast - For details contact our Technical Dept EN15/ FB1- FB7 & FSG EN115/EN179/UL05 BS476 PT/EN164-1/UL10C - up to 4 hours Above performance results are based on independent third party testing or assessment on selected doorsets SEISMIC TESTED TESTED TO OVER 1,000,000 CYCLES ENTRY METHODS: Key & Lever EXIT METHODS: Panic Plate (meets EN115) Push Pad (meets EN179) Cranked Silver Lever (meets EN179) Thumbturn & Lever Key & Lever
161 89 SLIMLINE: KEY RELEASE LOCKING TECHNICAL DRAWINGS 9.5 46.75 66 91.5 15 76.5 SELF-CODING SYSTEM The Slimline (SL) modular devices have a simple ordering code that covers the chosen methods of entry and exit, followed by additional enhancements to further customise the device. The device is easy to specify: Step 1. Bolt configuration Step. Choose the required entry code Step. Choose the required exit code Step 4. Select handing and opening direction Step 5. Select enhancements to customise and suit specific requirements STEP 1 STEP STEP STEP 4 STEP 5 Number of bolts Entry Exit Handing -point securing -point securing 1 Key and lever entry 1 4 5 6 Key and lever exit Thumbturn and lever Panic Plate Emergency lever Emergency push pad 1st Digit 0 Surface Mounted 1 Mortice Fitted nd Digit 0 Non-handed 4 Right Hand, open out 5 Left Hand, open out 57 Right Hand, open in 8 Left Hand, open in Enhancements O5 Cylinder - Medeco m-arx (registered) P5 4 Cylinder guard W Machine screws with steel dowels LEFT HAND (LH) #8 INWARD OPENING HANDING CODES Example system code: DEVICE BOLTS ENTRY EXIT HANDING ENHANCEMENTS SL 1 5-04 - O5 K OUTWARD OPENING HANDING CODES LEFT HAND (LH) #5 RIGHT HAND (RH) The code SL15-04-O5P5 specifies the Slimline point device external lock release with lever handle and lever handle emergency exit from inside. The enhancement codes specify Medeco m-arx registered cylinders (05) and 4 Cylinder guard protection (P5). Note: The code 04 specifies a surface mounted and right hand outward opening system. #4 P5 RIGHT HAND (RH) # TO BE REPLACED WITH: 0 FOR SURFACE MOUNTED - 1 FOR MORTICE FITTED #7 SLIMLINE: KEY RELEASE LOCK - POPULAR ENHANCEMENTS AVAILABLE CODE ENHANCEMENT -D1 15mm bolts with enhanced-level guides -D 5mm bolts and high-level guides (stainless steel) -H7 External pad-lockable handle (padlock not supplied) -H6 -K1 -M Monitoring of bolt and deadlock status - surface cable outlet -O Cylinder - Assa Twin Combi 5800 - (choice for registration) -O4 Surelock Cylinder -P Cylinder guard Rim latch cylinder - to suit door thickness of 4-60mm -W For full list of enhancements please see page at the end of this document
Assessed to ISO 9001:008 LPCB Cert No. 516-1 MANAGEMENT SYSTEMS SLIMLINE: ACCESS CONTROL SOLENOID LOCKING High Performance Multi-point locking device auto locking upon door closure providing high security protection, ballistic and blast resistance in one product. The flexible design of the product enables operation with all access control systems. Optional external mechanical key override available providing mechanical backup when required. Panic and emergency escape to BSEN 179/115 is available in situations where panic or emergency means of escape are required. The Slimline Range has been engineered with a common fixing footprint, enabling other alternative modules to be retro-fitted to meet changes in operational requirement later. Access control entry (supplied by others) OPERATIONS Entry - activating the access control, the device will automatically unlock allowing the user to manually retract all shoot bolts using the lever handle. Upon door closure the bolts will automatically engage and fully secure. Exit- single handed means of escape is provided by either lever handle, push pad or full width panic plate. Further alternative methods of egress can be provided by either access control and/or break dome/thumbturn & lever handle operation where access control audit trails may be required. FEATURES Surface mounted or mortice fitted solutions Automatic re-securing upon door closure Proven rack & pinion mechanism 15mm x 5mm throw stainless steel bolts Choice of exit device operators Tested to over 1,000,000 cycles Suitable for doors.m high and extensions available for taller doorsets Optional Bolt Enhancement packs available for blast applications Bolt and deadlocking status monitoring as standard 1V DC fail secure, as standard 4V DC fail secure, 1V DC or 4V DC fail safe options BENEFITS Automatic unlocking and relocking Tested on specific doorsets up to LPS 1175:6 Life safety device BSEN 179/115 and UL05 compliant Optional remote monitoring of lock/bolt status Engineered for longevity and trouble free service LPS 1175 SECURITY RATING (on selected doorsets) 4 5 6 Blast - For details contact our Technical Dept EN115/EN179/UL05 EN15/ FB1- FB7 & FSG BS476 PT/EN164-1/UL10C - up to 4 hours Above performance results are based on independent third party testing or assessment on selected doorsets SEISMIC TESTED TESTED TO OVER 1,000,000 CYCLES ENTRY METHODS: Access Control Manual Key Override EXIT METHODS: BREAK Access Control Panic Plate (meets EN115) Push Pad (meets EN179) Cranked Silver Lever (meets EN179) RTE Button Breakdome Thumbturn & Lever
161 91.5 15 89 SLIMLINE: ACCESS CONTROL SOLENOID LOCKING TECHNICAL DRAWINGS 9.5 46.75 66 76.5 SELF-CODING SYSTEM The Slimline (SL) modular devices have a simple ordering code that covers the chosen methods of entry and exit, followed by additional enhancements to further customise the device. The device is easy to specify: Step 1. Bolt configuration Step. Choose the required entry code Step. Choose the required exit code Step 4. Select handing and opening direction Step 5. Select enhancements to customise and suit specific requirements STEP 1 STEP STEP STEP 4 STEP 5 Number of bolts Entry Exit Handing -point securing -point securing 0 No Entry Provision Access Control 4 5 6 Access Control Thumbturn and lever Panic Plate Emergency lever Emergency push pad 1st Digit 0 Surface Mounted 1 Mortice Fitted nd Digit 0 Non-handed 4 Right Hand, open out 5 Left Hand, open out 57 Right Hand, open in 8 Left Hand, open in K O5 W Enhancements External key release in case of power failure Cylinder - Medeco m-arx (registered) Surface fixing by coach screws LEFT HAND (LH) #8 INWARD OPENING HANDING CODES # TO BE REPLACED WITH: 0 FOR SURFACE MOUNTED - 1 FOR MORTICE FITTED Example system code: OUTWARD OPENING HANDING CODES LEFT HAND (LH) #5 DEVICE BOLTS ENTRY EXIT HANDING ENHANCEMENTS SL - 04 - K O5 RIGHT HAND (RH) #7 RIGHT HAND (RH) #4 The code SL-04-KO5 specifies the Slimline point access control lock release with external lever handle and lever handle exit. The enhancement codes specify external key release in case of power failure (K), and Medeco m-arx registered cylinder (05). Note: The code 04 specifies a surface mounted and right hand outward opening system. SLIMLINE: ACCESS CONTROL SOLENOID LOCK - POPULAR ENHANCEMENTS AVAILABLE CODE ENHANCEMENT -H6 -K External key release in case of power failure -R1 Access control (energise to unlock) 4 volt DC solenoid -R Access control (energise to lock) 4 volt DC solenoid -R5 Access control (energise to unlock) 1 volt solenoid, with combination lock, emergency escape and lock monitoring -U Auxiliary horizontal bolt below handle position with bottom vertical bolt -U1 Auxiliary horizontal bolt above handle position with top vertical bolt -W -W For full list of enhancements please see page at the end of this document
Assessed to ISO 9001:008 LPCB Cert No. 516-1 MANAGEMENT SYSTEMS SLIMLINE: ACCESS CONTROLLED MOTORISED LOCKING Motorised multi-point locking mechanisms providing complete remote control or access control operation via card, pin or push-button whilst delivering security, ballistic and blast resistance in one product. The flexible design of the product enables the locking mechanism to be used with all access control systems. The opening and closing of the doorset can be operated remotely when used in conjunction with a motorised door actuator. Mechanical override providing panic and emergency means of escape to BSEN 179/115 is available. The Slimline Range has been engineered with a common fixing footprint, enabling other alternative modules to be retro-fitted to meet future changes in operational requirement later. OPERATIONS ENTRY - Activating the access control, the device will unlock and automatically retract all shoot bolts. Upon door closure the bolts will automatically engage and fully secure. For fully automated operation the locking system should be installed in conjunction with an ADO motorised door actuator. An external mechanical key and lever handle can be used to override the access control system and gain entry. EXIT - Activating the access control, the device will unlock and automatically retract all shoot bolts. Alternatively a single handed means of escape is provided by either a lever handle, push pad or full width panic plate. A further option using a break dome/thumbturn provides an alternative method of allowing egress. FEATURES Surface mounted fitted solutions Automatic re-securing upon door closure Proven rack & pinion mechanism 15mm x 5mm throw stainless steel bolts Choice of exit device operators Suitable for doors.m high and extensions available for taller doorsets Preprogrammed control box & power supply Optional Bolt Enhancement packs available for blast applications Supplied with bolt & deadlock status monitoring Alternative direction & additional auxiliary bolts can be added 4V DC fail safe as standard BENEFITS Remote or local operation capability Tested on specific doorsets up to LPS 1175:6 Fully automatic securing and unsecuring of locking system Fully automated opening and closing of door when fitted with an ADO actuator Life safety device BSEN 179/115 compliant Remote monitoring of lock and bolt status LPS 1175 SECURITY RATING (on selected doorsets) 4 5 6 Blast - For details contact our Technical Dept EN115/EN179/UL05 EN15/ FB1- FB7 & FSG BS476 PT/EN164-1/UL10C - up to 4 hours Above performance results are based on independent third party testing or assessment on selected doorsets SEISMIC TESTED TESTED TO OVER 1,000,000 CYCLES ENTRY METHODS: Access Control with Motorised Lock Remote Access with Motorised Lock Manual Key Override EXIT METHODS: BREAK Access Control with Motorised Lock Remote Access with Motorised Lock Panic Plate (meets EN115) Push Pad (meets EN179) Cranked Silver Lever (meets EN179) RTE Button Breakdome Thumbturn & Lever
91.5 15 45 SLIMLINE: ACCESS CONTROLLED MOTORISED LOCKING TECHNICAL DRAWINGS 60 4 66 146 76.5 SELF-CODING SYSTEM The Slimline (SL) modular devices have a simple ordering code that covers the chosen methods of entry and exit, followed by additional enhancements to further customise the device. The device is easy to specify: Step 1. Bolt configuration Step. Choose the required entry code Step. Choose the required exit code Step 4. Select handing and opening direction Step 5. Select enhancements to customise and suit specific requirements STEP 1 STEP STEP STEP 4 STEP 5 Number of bolts Entry Exit Handing -point securing -point securing 0 No Entry Provision Access Control 4 5 6 Access Control Thumbturn and lever Panic Plate Emergency lever Emergency push pad 1st Digit 0 Surface Mounted nd Digit 0 Non-handed 4 Right Hand, open out 5 Left Hand, open out 57 Right Hand, open in 8 Left Hand, open in Enhancements K External key release in case of power failure M7 Motorised bolt release* O5 Cylinder - Medeco m-arx (registered) (*must be specified for motorised lock) LEFT HAND (LH) #8 INWARD OPENING HANDING CODES # TO BE REPLACED WITH: 0 FOR SURFACE MOUNTED - 1 FOR MORTICE FITTED Example system code: OUTWARD OPENING HANDING CODES LEFT HAND (LH) #5 DEVICE BOLTS ENTRY EXIT HANDING ENHANCEMENTS RIGHT HAND (RH) #7 RIGHT HAND (RH) #4 SL 5-04 - K M7 O5 The code SL5-04-KM7O5 specifies the Slimline point device access control motorised lock release with external lever handle and lever handle emergency exit from inside. The enhancement codes specify external key release in case of power failure (K), Motorised bolt release (M7) must be specified, and Medeco m-arx registered cylinder (05). Note: The code 04 specifies a surface mounted and right hand outward opening system. SLIMLINE ACCESS CONTROLLED MOTORISED LOCK - POPULAR ENHANCEMENTS AVAILABLE CODE ENHANCEMENT -H6 -K External key release in case of power failure -R1 Access control (energise to unlock) 4 volt DC solenoid -R Access control (energise to lock) 4 volt DC solenoid -R5 Access control (energise to unlock) 1 volt solenoid, with combination lock, emergency escape and lock monitoring -T Auxiliary horizontal bolt below handle position (without bottom vertical bolt) -T1 Auxiliary horizontal bolt above handle position (without top vertical bolt) -U Auxiliary horizontal bolt below handle position with bottom vertical bolt -U1 Auxiliary horizontal bolt above handle position with top vertical bolt -W -W For full list of enhancements please see page at the end of this document
Assessed to ISO 9001:008 LPCB Cert No. 516-1 MANAGEMENT SYSTEMS SLIMLINE: COMBINATION LOCKING High Performance Multi-point locking mechanisms providing high security protection, ballistic and blast resistance in one product. The design of the product enables the use of combination locks from all major manufactures and gives the opportunity to escape through locked doors in situations where panic or emergency means of escape are required. The Slimline Range has been designed with a common fixing footprint, enabling other alternative modules to be retro-fitted to meet future changes in operational requirement. Combination lock OPERATIONS Entry - Combination lock to be used to deadlock or lock down the Slimline system. Externally unlock the combination lock and operate the lever handle to retract the shoot bolts. Exit- single handed means of escape is provided by either lever handle, push pad or full width panic plate. FEATURES Manual locking and automatic bolting Surface mounted solutions Proven rack & pinion mechanism 15mm x 5mm throw stainless steel bolts Choice of exit device operators Tested to over 1,000,000 cycles Suitable for doors.m high and extensions available for taller doorsets Alternative direction & additional auxiliary bolts can be added Optional Bolt Enhancement packs available for blast applications Optional bolt status monitoring BENEFITS Keyless mechanical or digital combination lock entry Tested on specific doorsets up to LPS 1175:6 Life safety device BSEN 179/115 and UL05 compliant Optional remote monitoring of bolt status Engineered for longevity and trouble free service LPS 1175 SECURITY RATING (on selected doorsets) 4 5 6 Blast - For details contact our Technical Dept EN115/EN179/UL05 EN15/ FB1- FB7 & FSG BS476 PT/EN164-1/UL10C - up to 4 hours Above performance results are based on independent third party testing or assessment on selected doorsets SEISMIC TESTED TESTED TO OVER 1,000,000 CYCLES ENTRY METHODS: Combination with Lever EXIT METHODS: Panic Plate (meets EN115) Push Pad (meets EN179) Cranked Silver Lever (meets EN179)
161 91.5 15 89 SLIMLINE: COMBINATION LOCKING TECHNICAL DRAWINGS.5 66 76.5 SELF-CODING SYSTEM The Slimline (SL) modular devices have a simple ordering code that covers the chosen methods of entry and exit, followed by additional enhancements to further customise the device. The device is easy to specify: Step 1. Bolt configuration Step. Choose the required entry code Step. Choose the required exit code Step 4. Select handing and opening direction Step 5. Select enhancements to customise and suit specific requirements STEP 1 STEP STEP STEP 4 STEP 5 Number of bolts Entry Exit Handing -point securing -point securing Combination lock 5 6 Access Control Emergency lever Emergency push pad 1st Digit 0 Surface Mounted nd Digit 0 Non-handed 4 Right Hand, open out 5 Left Hand, open out 57 Right Hand, open in 8 Left Hand, open in K99 M Enhancements Supplied without a combination lock Monitoring of bolt and deadlock status - surface cable outlet LEFT HAND (LH) #8 INWARD OPENING HANDING CODES # TO BE REPLACED WITH: 0 FOR SURFACE MOUNTED - 1 FOR MORTICE FITTED Example system code: DEVICE BOLTS ENTRY EXIT HANDING ENHANCEMENTS SL 5-04 - K99 OUTWARD OPENING HANDING CODES LEFT HAND (LH) #5 RIGHT HAND (RH) #7 RIGHT HAND (RH) #4 The code SL5-04-K99 specifies the Slimline point device combination lock with external lever handle and lever handle emergency exit from inside. The enhancement codes specify a combination lock (not supplied) (K99). Note: The code 04 specifies a surface mounted and right hand outward opening system. SLIMLINE: COMBINATION LOCK - POPULAR ENHANCEMENTS AVAILABLE CODE ENHANCEMENT -D1 15mm bolts with enhanced-level guides -D 5mm bolts and high-level guides (stainless steel) -H External handle addition (not lockable) -H6 -K External key release in case of power failure -K17 Kaba Mass 55 Combination Lock -K S&G 740 Combination Lock -K99 Supplied without a combination lock -M Monitoring of bolt and deadlock status - surface cable outlet -U Auxiliary hook bolt below handle position with bottom vertical bolt For full list of enhancements please see page at the end of this document
Surelock McGill have developed and manufacture a range of high performance cylinder guards designed to provide protection of the cylinder against various levels of physical attack. CYLINDER GUARDS The cylinder guards have been tested to the latest LPS 1175 standards, meeting security levels from 6. These guards are manufactured to suit doors between 40mm and 100mm thick. The design enables the guard to accept either a Euro-profile, Scandinavian oval, or round rim cylinder, it will accommodate the majority of commercially available cylinders. The cylinder guard has 6No. M8 fixings offering maximum security. FEATURES Provides security to External Cylinders for LPS 1175 Security Ratings 1,,, 4, 5 and 6* Fits wide range of Rim, Scandinavian Oval and Europrofile Cylinders Suitable for use with surface mounted and mortise fitted locks Modular design Corrosion resistance to EN 1670 Grade 5 Supplied with 5 packers (9mm) to suit any cylinder ORDER CODES Number Product of bolts Range First digits Security Rating 4th digit Cylinder Profile 5th digit Fixings 6th digit Fixing Plate 7th digit GSS = Steel cylinder guard for surface mounted locks GMS = Steel cylinder guard for mortised locks 1 = LPS 1175 1 = LPS 1175 = LPS 1175 4 = LPS 1175 4 5 = LPS 1175 5 6 = LPS 1175 6 E = for Europrofile Cylinders S = for Scandinavian Oval Cylinders R = for Rim Cylinders A = for Abloy Rim Cylinders 0 = No fixings supplied 4 = Supplied with 40mm fixings 5 = Supplied with 50mm fixings 6 = Supplied with 60mm fixings 7 = Supplied with 70mm fixings 8 = Supplied with 80mm fixings 9 = Supplied with 90mm fixings 0 = Supplied without a fixing plate 1 = Supplied with a fixing plate Order fixings over 90mm separately FIXING LENGTH STANDARD CYLINDER FIXING METHOD OPTION W15 (5MM LOAD PLATE CYLINDER GUARD FIXING) DOOR THICKNESS OPTION W14 (BOLT THROUGH CYLINDER GUARD FIXING) 40MM 40mm to 50mm 5mm to 45mm - 50MM 50mm to 60mm 45mm to 55mm - 60MM 60mm to 70mm 55mm to 65mm - 70MM 70mm to 80mm 65mm to 75mm 40mm to 50mm 80MM 80mm to 90mm 75mm to 85mm 50mm to 60mm 90MM 90mm to 100mm 85mm to 95mm 60mm to 70mm Screw length for option W14 subject to change when any packing options are introduced GSS GSS4 Standard package order codes (when ordered with a locking system) CODE GSSR51 GSSS51 GSSE51 GSSR51 GSSS51 GSSE51 GSS4R51 GSS4S51 GSS4E51 GSS5R51 GSS5S51 GSS5E51 GSS6R51 GSS6S51 GSS6E51 ENHANCEMENT Rim latch cylinder - to suit 50-60mm thick door Scandinavian oval cylinder - to suit 50-60mm thick door Rim latch cylinder - to suit 50-60mm thick door Scandinavian oval cylinder - to suit 50-60mm thick door 4 Rim latch cylinder - to suit 50-60mm thick door 4 Scandinavian oval cylinder - to suit 50-60mm thick door 5 Rim latch cylinder - to suit 50-60mm thick door 5 Scandinavian oval cylinder - to suit 50-60mm thick door 6 Rim latch cylinder - to suit 50-60mm thick door 6 Scandinavian oval to suit 50-60mm thick door GSS5 GSS6
CYLINDER GUARDS CYLINDER OPTION GUIDE Manufacturer Model GMS, GMS GMS4, GMS5 GSS, GSS GSS4, GSS5 GSA Abloy Disclock Pro CY40-DP Rim 1 Abloy Disclock Pro CY405-DP Rim 1 Abloy Disklock Pro CY01-DP Scandinavian Oval 7 Abloy Disklock Pro CY0-DP, CY04-DP, CY05-DP, CY07-DP, CY08-DP, CY09-DP, CY17-DP, CY18-DP, CY19-DP, CY1-DP, CY-DP, CY-DP, CY6-DP, CY7-DP, CY8-DP, CY1-DP, CY-DP, CY-DP, CY6-DP, CY7-DP, CY8-DP 0 Abloy Novel CY01-VL Scandinavian Oval 7 Abloy Novel CY1-VL, CY-VL, CY-VL, CY6-VL, CY7-VL, CY8-VL, CY1-VL, CY-VL, CY-VL, CY6-VL, CY7-VL, CY8-VL 0 Abloy Novel CY40-VL Rim 1 Abloy Novel CY405-VL Rim 1 Abloy Protec Cliq / Cliq Remote CY01- PT-CLIQ Scandinavian Oval 7 Abloy Protec Cliq / Cliq Remote CY0-PT-CLIQ, CY04-PT-CLIQ, CY05-PT-CLIQ, CY1-PT-CLIQ, CY-PT-CLIQ, CY-PT-CLIQ 0 Abloy Protec Cliq / Cliq Remote CY40- PT-CLIQ Rim 1 Abloy Protec CY01-PT Scandinavian Oval 7 Abloy 0 Protec CY0-PT, CY04-PT, CY05-PT, CY07-PT, CY08-PT, CY09-PT, CY17-PT, CY18-PT, CY19-PT, CY1-PT, CY-PT, CY-PT, CY6-PT, CY7-PT, CY8-PT, CY1-PT, CY-PT, CY-PT, CY6-PT, CY7-PT, CY8-PT Abloy Protec CY40-PT Rim 1 Abloy Protec CY405-PT Rim 1 Abloy Scandinavian Oval 7 Abloy Abloy Protec Cliq / Cliq Remote CY01- TT-CLIQ Protec Cliq / Cliq Remote CY1-TT- CLIQ, CY-TT- CLIQ,CY-TT-CLIQ Protec Cliq / Cliq Remote CY40- TT-CLIQ cylinder (key: thumbturn) 0 Rim 1 Abloy Protec CY01-TT Scandinavian Oval 7 Abloy 0 Protec CY1-TT, CY-TT, CY-TT, CY6-TT, CY7-TT, CY8-TT CY1-TT, CY-TT, CY-TT CY6-TT, CY7-TT, CY8-TT Abloy Protec CY40-TT Rim 1 Abloy Protec CY405-TT Rim 1 Access Tigris Omega Rim 5 Access Tigris Omega Scandinavian Oval 7 Access Tigris Omega 0 Thickness of packers (dim X) Manufacturer Model GMS, GMS GMS4, GMS5 GSS, GSS GSS4, GSS5 GSA Access Tigris Plus Scandinavian Oval 7 Access Tigris Plus 0 Access Tigris Premier Two Scandinavian Oval 7 Access Tigris Premier Two 0 Acsys High Security 0 ASSA 44, 44, 447 0 ASSA 4457 Rim 4 ASSA 4801 Scandinavian Oval 7 ASSA 4807 Scandinavian Oval 7 ASSA 48, 48, 487 0 ASSA 4857 Rim 4 ASSA 76, 76, 767 0 ASSA Scandinavian Oval 7 4401 Cliq / Cliq Remote ASSA 4401dp Scandinavian Oval 7 ASSA Scandinavian Oval 7 4407 Cliq / Cliq Remote ASSA 4407dp Scandinavian Oval 7 ASSA 44dp, 7dp 0 ASSA 0 44M, 44M, 44M7 Cliq / Cliq Remote ASSA C5801 Scandinavian Oval 7 ASSA C5807 Scandinavian Oval 7 ASSA C58, C58, C587 0 ASSA C5857 Rim 4 ASSA Twin 7601 Scandinavian Oval 7 ASSA Twin 7607 Scandinavian Oval 7 ASSA P601 Scandinavian Oval 7 ASSA P607 Scandinavian Oval 7 ASSA P6, P6, P67 0 ASSA P657 Rim 4 ASSA 7657 Rim 4 Cyberlock CL-OVLD Scandinavian Oval 7 ESLA NG 0 ESLA NG Scandinavian Oval 8 Ilco 7016 Rim 6 iloq C10S.1 Scandinavian Oval 15 Kaba expert Scandinavian Oval 6 Kaba expert 0 Kaba Gege pextra Scandinavian Oval 7 Kaba Gege pextra 0 Kaba Gege RAM Scandinavian Oval 7 Kaba Gege RAM 0 Kaba K0 Scandinavian Oval 6 Kaba Quattro PluS Scandinavian Oval 6 Kaba Quattro PluS Rim 0 Kaba Quattro PluS 0 Kaba K0 Rim 0 KESO 4000S Scandinavian Oval 7 KESO 4000S Rim KESO 4000S 0 Locken CL-PLWR Scandinavian Oval 7 Medeco M-ARX Scandinavian Oval 7 Medeco M-ARX Rim 4 Medeco M-ARX 0 Schlage 000+XT 0 Schlage 000+XT Scandinavian Oval Surelock McGill CY-ED, CY-ET, CY-ES 0 Surelock McGill CY-RM Rim 5 Surelock McGill CY-SN Scandinavian Oval 7 Union 1x1 Rim 5 Yale X5 Rim 4 Thickness of packers (dim X) Note: Union 1x1 is not suitable for LPS 1175
GUIDES AND KEEPS OUTWARD OPENING FRAME KEEPS FOR SURFACE MOUNTED SYSTEMS SC Timber Frame Centre Keep SC1 Timber Rebated Frame Top Keep With Strike SC Steel Frame Top Keep With Strike INWARD OPENING FRAME KEEPS FOR SURFACE MOUNTED SYSTEMS UNIVERSAL SURFACE MOUNTED KEEPS FOR STEEL & TIMBER FRAMES SD Timber Frame Keep For Top & Center SA Frame Keep SA1 Extended Frame Keep For Center Of Double Doors FLOOR KEEPS FIXING/LOAD PLATES SF Dust Excluding Socket SE Easy Clean Socket Fixing Plate Load Plate The Slimline System supplied with mm thick or mm thick (motorised version) fixing plate. An optional 5mm thick load plate can be supplied providing an enhanced fixing method for the Slimline lock and cylinder guard.
SLIMLINE - GLOSSARY GLOSSARY A: CENTRE MODULE D1: GUIDE BRACKET 40mm WIDE H: BASE PLATE ANTI THRUST L: TOP VERTICAL BOLT P: GUIDE PLATE TOP/BOTTOM B: GUIDE BRACKET 40mm WIDE E: RESTRAINT I: TOP TUBE M: PACKING TEMPLATE Q: PUSH PAD C: GUIDE BRACKET 5MM WIDE F: BASE PLATE 40mm WIDE J: BOTTOM TUBE/BOLT N: HANDLE PLATE R: PANIC PLATE D: GUIDE BRACKET ANTI THRUST G: BASE PLATE 5MM WIDE K: TUBE CLIP O: FORE END PLATE S: LEVER HANDLE L E L E I K C I G K A A M N N S F O S B Q K G C J H R D SURFACE MOUNTED D1 MORTICE FITTED P
FULL ENHANCEMENT LIST CODE ENHANCEMENT -A0 Manual bolting -A1 -A5 Auto- - nodding donkey -A6 Auto-bolting with umbrella restraint (inward opening) -B(n) Packing (n) number of 1mm increments -C System cover (Slimline Classic Only) -D1 15mm bolts with enhanced-level guides -D 5mm bolts and high-level guides (stainless steel) -E(n) Height increment; (n) number of 1000mm increments -H External handle addition (not lockable) -H0 Handles not included -H5 Inside green lever handle -H7 External pad-lockable handle (padlock not supplied) -H8 External pad-lockable handle with emergency override (padlock not supplied) -H9 Handles not included; with 8mm follower -H11 1M Long Panic Bar Tube -H6 -H8 Slimline round tube panic bar -H9 Slimline Push Pad green -H0 Slimline Panic Plate green -H1 Guarded lever handle - inside -H Anti-ligature lever handle - inside -H Guarded lever handle - outside -H4 Anti-ligature lever handle - outside -H5 Guarded lever handle - both sides -H6 Anti-ligature lever handle - both sides -K Key retained in unlocked position -K0 Manual lock operation -K External key release in case of power failure -K4 Break-dome over thumbturn -K6 Lockable in the retracted position only (function according to system type) -K7 Lockable in thrown and retracted position (function according to system type) -K8 Automatic ratchet locking upon bolt retraction - internal key re-set facility -K1 Euro- -latch type -K14 Manual lock-back facility, bolting only (internal Euro- -K15 Shrouded internal thumbturn release -K17 Kaba Mass 55 Combination Lock -K S&G 740 Combination Lock -K1 Scandinavian Oval cylinder in place of standard rim-latch type -K99 Supplied without a combination lock -L LEO - external key-entry lock with internal emergency override - surface mounted -L1 -L - tested to 4 protection -L Surface mounted LEO with Euro- -L4 - -L5 - -M Monitoring of bolt and deadlock status - surface cable outlet -M7 Motorised bolt release -O0 Cylinder - -O1 Cylinder - Kaba-0 (registered) -O Cylinder - Assa Twin Combi 5800 - (choice for registration) -O Cylinder - Yale -O4 Cylinder/Lock - Bramah (registered)
FULL ENHANCEMENT LIST -O5 Cylinder Medeco ARX (registered) -O6 Cylinder - Ingersoll (registered) -O9 Cylinder - Abloy Disklock Pro cylinder (registered, gold level) -O10 Cylinder - Kaba Quattro S - registered -O11 Cylinder - Kaba 0 Armoured C5 -O Cylinder - Assa Ruko Flexcore - (choice for registration) -O4 Surelock Cylinder -O91 Cylinder - Abloy Protech (registered diamond level) -P Cylinder guard Rim latch cylinder - to suit door thickness of 4-60mm -P4 -P5 Cylinder guard 4 - Rim latch cylinder to suit door thickness of 4-60mm -P6 Cylinder guard 5 - Rim latch cylinder to suit door thickness of 4-60mm -Q4 Resistance to bolt end-thrust attack -Q6 Secondary manual key operated deadlock (-man entry) -Q11 Shorter body 198mm -R1 Access control (energise to unlock) 4 volt DC solenoid -R Access control (energise to lock) 1 volt DC solenoid -R Access control (energise to lock) 4 volt DC solenoid -R5 Access control (energise to unlock) 1 volt solenoid, with combination lock, emergency escape and lock monitoring -R6 Access control (energise to unlock) 1 volt solenoid, with combination lock, internal key override and lock monitoring -S -S -T Auxiliary horizontal bolt below handle position (without bottom vertical bolt) -T1 Auxiliary horizontal bolt above handle position (without top vertical bolt) -T Auxiliary hook bolt below handle position (without bottom vertical bolt) -T Auxiliary hook bolt above handle position (without top vertical bolt) -U Auxiliary horizontal bolt below handle position with bottom vertical bolt -U1 Auxiliary horizontal bolt above handle position with top vertical bolt -U Auxiliary hook bolt below handle position with bottom vertical bolt -U Auxiliary hook bolt above handle position with top vertical bolt -V VIP (Visual Indicator Panel) -V1 VIP with electrical monitoring of visual indicator status with isolation keyswitch -V VIP with electrical monitoring of visual indicator status -W -W -W -W8 -W9 -W10 -W11 -W14 -W15 5mm load plate under centre module -Y0 Single leaf non BS EN type device -Z Double doorset active leaf BS EN 115 approved device
Surelock McGill (Head Office) 6 The Business Centre Molly Millars Lane Wokingham Berkshire RG41 QY Tel: +44 (0) 118 977 55 Fax: +44 (0) 118 977 191 Web: www.surelockmcgill.com Email: sales@surelockmcgill.com MANAGEMENT SYSTEMS Assessed to ISO 9001:008 LPCB Cert No. 516-1