LMB5 linkable batten A Cost effective linkable T5 mini batten
TE Bare Batten A Cost effective bare batten T8 or T5
YB Surface Bare T5 A Cost effective bare T5 fluorescent for surface mount applications
YWWD Wide Body Wire Guard A Cost Effective Wire Guard Batten This is a well-constructed Wide Body Wire Guarded fitting, Surface or Pendant Mounted, for use in various applications
YWG Wire Guard T5 A cost effective wire guarded batten suitable for numerous applications
YWD Wrap-around Diffused T5 A Cost effective wrap-around diffused T5 fluorescent for surface mount applications Advantage A cost effective wrap-around diffused T5 fluorescent for surface mount applications. Working well in multiple setting including hospitals, offices and stores Light Distribution Available in D50 (LED) emergency version on request
KL Surface Wrap Around White Powder Coated Wrap Around Diffused Fluorescent for Surface Mount Applications
KS Surface Fitting with Diffuser An aesthetically pleasing surface mounted fitting with various diffuser options
Pentagon A significantly robust and tamper proof fluorescent fitting for the more abrasive application White heavy gauge power coated housing Heavy duty polycarbonate lens Stainless steel anti-vandal tamperproof screws Approved for safe-cell, prison & police application For use in high vandal installations Require special maintenance tool Standard screws on request Some models available with deep base for through wiring SP228 SP128 SP 114 1X14W T5 SP 114-NM 1X14W T5 with non-maintained EMG SP214 2X14W T5 SP128 1X28W T5 SP128-M 1X28W T5 with maintained EMG SP 128-NM 1X28W T5 with non-maintained EMG SP228 2X28W T5 SP 228-M 2X28W T5 with maintained EMG * Available with DALI, DSI or 1-10V Dimming on request
TB5 Recessed Diffused A Cost effective diffused T5 fluorescent for surface mount applications
IK Recessed Diffuse Diffused recessed Fluorescent, T5, IP 40
YHD5 Hinged Diffused T5 A Cost effective recessed diffused T5 for T-bat or Plaster ceilings
IK IP54 Recessed Diffused Diffused recessed Fluorescent, T5, IP 54
Lock and Seal Troffer A cost effective Lock and Seal troffer for contamination free environments Advantages Applications LST128EL 1x28w T5, Electronic Ballast, Non-Dimmable LST228EL 2x28w T5, Electronic Ballast, Non-Dimmable LST328EL 3x28w T5, Electronic Ballast, Non-Dimmable LST154EL 1x54w T5, Electronic Ballast, Non-Dimmable LST254EL 2x54w T5, Electronic Ballast, Non-Dimmable Specify dimming type separately if required
I T5 Louvre Troffer A series of recessed louvre troffers ideally suited for offices And areas with high lighting requirements
Double Parabolic Perforated T5 A Cost effective T5 glare free fitting for T-bar Ceilings Fabricated from cold rolled Mild steel Powder coated white IP20 Mirror double parabolic reflectors Dimmable options For T-bar ceilings Advantage A cost effective louvered recessed T5 fluorescent for T-bar ceiling mount applications. Working well in multiple setting including office & commercial tenants
IN/IN2 Recessed Indirect Fittings A recessed fitting suitable for various applications requiring a subtle indirect light source
YID Indirect Fitting A cost effective glare free fitting for recessed plaster ceilings Fabricated from mild steel, electrostatically coated Perforated mild steel diffuser Glare free Multiple light sources available Dimmable option For recessed plaster ceilings
V3 Weatherproof An ABS or Polycarbonate body IP65 Fluorescent, T5 with polycarbonate diffuser
Vanda-Battle Vandal resistant T5/T8 fluorescent fitting, IP65, IK10
EGE Square Extrusion A made to order square extrusion system produced in Western Australia, with numerous specifications available and suitable for any application. Lamp Options The extrusion is available with fluorescent tubes, LED strips or spotlights. The light source can be mounted in specific positions, end to end or overlapping. Control Gear All relevant control gear is discretely mounted in the extrusion. Standard control gear or various dimming options ( 0-10v Dim, DSI Dim, DALI Dim ) are available. Light Distribution and Finishes Available with reeded microsphere frosted acrylic diffusers or low brightness louvers, with up lighting slots as an option also. The extrusion can be finished in pearl white, black or raw material. Mounting and Joining The square extrusion system is designed to be surface mounted, recessed or suspended with stainless steel wire systems. Made to a maximum length of 4.5m, where longer runs are required three point joining and electrical plug in systems are supplied. SQ110-C-128L SQ110-S-128L SQ110-R-128L 1x28W Louvered, surface mount 1x28W Louvered, suspension 1x28W Louvered, recessed SQ110-C-228L SQ110-S-228L SQ110-R-228L 2x28W Louvered, surface mount 2x28W Louvered, suspension 2x28W Louvered, recessed SQ110-C-128D SQ110-S-128D SQ110-R-128D 1x28W Diffused, surface mount 1x28W Diffused, suspension 1x28W Diffused, recessed Recess Trim Recess Trim SQ110-C-228D SQ110-S-228D SQ110-R-228D 2x28W Diffused, surface mount 2x28W Diffused, suspension 2x28W Diffused, recessed
EGE Oval Extrusion A made to order oval extrusion system produced in Western Australia, With numerous specifications available and suitable for any application. Designed, manufactured and assembled in WA Energy efficient Maintenance free Easy installation Emergency and dimmable options available Made specifically to order and delivered to suit Project schedules For use in schools, hospitals, retail environments, Office and property developments Lamp Options The extrusion is available with fluorescent tubes, LED strips or spotlights. The light source can be mounted in specific positions, end to end or overlapping. Control Gear All relevant control gear is discretely mounted in the extrusion. Standard control gear or various dimming options ( 0-10v Dim, DSI Dim, DALI Dim ) are available. Light Distribution and Finishes Available with reeded microsphere frosted acrylic diffuser or low brightness louvers, with up lighting slots as an option also. The extrusion can be finished in pearl white, black or raw material. Mounting and Joining The oval extrusion system is designed to be surface mounted, recessed or suspended with stainless steel wire systems. Made to a maximum length of 4.5m, where longer runs are required three point joining and electrical plug systems are supplied. OV70-128L OV70-228L OV70-154L 1X28W louvered oval Extrusion 2x28W louvered oval Extrusion 1x54W louvered oval Extrusion OV70-128D 1X28W diffused oval Extrusion OV70-228D 2x28W diffused oval Extrusion OV70-154D 1x54W diffused oval Extrusion Add: -DALI / DSI / 1-10V for dimming options Add: -D25 / D40 for emergency to be included