THE HINO 00 DESIGNED TO KEEP YOU UCKING NO MATTER HOW LONG AND HARD THE ROAD IS AHEAD, YOU CAN REST ASSURED THAT THE HINO 00 RANGE, WITH PROVEN TECHNOGY AND RELIABILITY BEYOND QUESTION, WILL BE WITH YOU EVERY STEP OF THE WAY. The with a Gross Combination Mass (GCM) capacity of up to 5 000 kgs, powered by an engine with optimal power delivery, economical fuel consumption and efficient torque transfer is the perfect long-haul partner for you. The technological advancements of the gives the driver every advantage for a safe and successful trip by reducing driver fatigue with features such as the no clutch operation, ergonomic seats, and an easy-to-use instrumentation panel. A double sleeper cab model is available so that your driver can arrive well rested and on time. The 00 range also has a full range of active and passive safety features to protect both your driver as well as your asset. HINO 00 SERIES 81 Tipper 038 TT DSC 3. Air x 81 TT SSC Stl x 85 TT DSC Stl x 88 TT DSC Stl x 88 TT DSC Air x SINGLE AND DOUBLE SLEEPER CABS The cabs of the range are spacious and comfortable to ease the strain of long distance driving. The colours in the cab have been selected to be light and friendly, whilst remaining practical and easy to clean. AUTOMATED MANUAL ANSMISSION The 1-speed ASONIC transmission takes the guess work out of driving an extra heavy vehicle. The transmission will select and shift all gears in the full automatic model and ensure that your vehicle maintains Green- Band driving at all times. In semi-automatic mode manual gear select can be done to enhance operating efficiency. The vehicle remains fully protected against driver abuse in both operation modes. ABS (ANTI-LOCK BRAKING SYSTEM) The ABS system maximises the directional stability and steering control during emergency braking on all road surfaces. The ABS system also assists with brake force distribution during normal braking conditions. The ABS system of the is also integrated into the Hydraulic Intarder of the transmission adding further vehicle safety. FUEL TANK The Series model range is fitted with aluminium fuel tanks to provide enough fuel capacity to enable long-range driving yet maintaining low chassis weight. Tipper - 300 litres, x - 390 litres and x - 80/ litres. ENGINE The power delivery of the E13C engine has been developed to ensure that the driver can maintain Green-Band driving under all driving conditions. With a flat torque curve and high output torque from as low as 100 rpm, the engine can deliver optimum power and efficient fuel consumption resulting in optimum turnaround time. AIR SUSPENSION SYSTEM The air suspension system can be selected in operations where weight saving and ride stability is required. The system allows for ease of trailer coupling with an airbag deflation system that will lower the fifth-wheel height, this system can be operated from inside the cab. (Available on 038 TT and 88 TT)
THE HINO 00 YOUR SIMPLE, EFFICIENT AND RELIABLE SUTION FOR THE ROAD AHEAD Whilst the proven technology of the will ensure that you have a powerful, tough and highly efficient vehicle, have not forgotten the finer details of making your vehicle easy to drive, i.e. comfort. Even with great power delivery the has great fuel economy, which results in lower carbon emissions and reduced operating costs all of which make the a Greener truck. SAFE AND COMFOABLE Although safety is the ultimate goal in the design of the 00 Series cab, it also remains extremely comfortable. With safety features such as the collapsible steering wheel and a highly rigid cab reinforced main frame, the driver/passengers are protected in the event of a collision. The is made comfortable with features like air suspension, fully adjustable driver s seat, a tilt & telescopic steering column and easy to reach controls. WHATEVER THE JOB, THERE S A HINO 00 OPTIMALLY SUITED TO YOUR BUSINESS. The model range: 81 x Tipper, ideally suited as a 10cm 3 Tipper, which is perfect for the short and medium-haul tipper operation. 038 x truck tractor makes for the perfect high volume, low payload mover. Ideal for furniture removals and other van-body applications. With a 380 hp engine and a GCM of 5 500 kgs the 038 makes for the perfect medium to long- haul partner. 81, 85 and 88 X truck tractors are the ultimate medium and long-haul trucks. With GCM capacity of 5 000 kgs, engine power from 10 hp to 80 hp, double and single sleeper cabs, steel and air suspension options and a multitude of features you are sure to find the perfect partner for the long haul. 038 TT 85 TT/ 88 TT 81 TT 81 Tipper
SPECIFICATIONS Engine 81 Tipper 038 TT DSC 3. Air (AMT) 81 TT SSC 85 TT DSC 88 TT DSC 88 TT DSC Air (AMT) Category type Rear Axle Model description 81 Tipper 038 TT DSC 3. Air (AMT) 81 TT SSC 85 TT DSC 88 TT DSC 88 TT DSC Air (AMT) Model E13C - YK E13C VU E13C TN E13C TT E13C VB E13C VB Housing Type Stroke Compression Ignition Inter-Axle Diff Lock Auto non-spin Auto non-spin Make Model SH19 BBC - Rear Structure 080 090 090 090 090 090 CA - Cab to Axle 300 0 0 0 0 80 Bore X Stroke 13x1 13x1 13x1 13x1 13x1 13x1 CH - Cab Height 3030 3515 300 300 300 300 Capacity ( cc ) 1913 1913 1913 1913 1913 1913 Ratio : 1. 3. CW - Cab Width (Excl. Mirrors) 90 550 550 550 550 550 Compression Ratio : 1 1.5 1.5 1.5 1.5 1.5 1.5 Ring Gear Size (inches) 19 Type ABS FH - Frame Height Rear Axle 1085 1030 1090 1090 1090 105 Configuration - Front Overhang 130 Engine Oil Cooler FT - Front Track 035 035 035 035 035 035 Euro Emission Status Brake System : Front Service Brakes - Frame Width (Outside) 80 80 80 80 80 Firing Order Brake System : Rear H - Fifth Wheel Height 1 Governor : All speed/rld Dual Circuit Max. Homologated Body Width 00 Governor : Electric LSP Valve on Rear Axle (ABS) (ABS) (ABS) (ABS) (ABS) (ABS) Maximum Body Length 18 Injection Timing - Electronics (TICS) MGC - Minimum Ground Clearance 0 5 55 55 55 0 Injector Pump Steering Type Ratio : 1 1. 3.8 3. 5. 3. 5. 3. 5. 3. 5. 3. 5. - Overall Length 5 585 895 895 895 895 Max Eng. Speed rpm 150 000 150 150 000 000 Steering Column Tilt & Telescopic OVH - Overall Vehicle Height 3030 3510 300 3500 3500 3500 Number of Main Bearings Turning Radius Between Kerbs : (mm) 8100 00 00 00 00 300 Turning Radius Between Walls : (mm) 8800 00 8050 8050 8050 810 Type Full Synchromesh nd th Constantmesh 1st 1th 1st 1th 1st 1th 1st 1th 1st 1th - Rear Overhang 190 85 Number of Cylinders - Rear Track 1890 185 180 180 180 185 Number of Valves per Cylinder 550 50 80 80 80 535 Power (EEC/ISO NET) (kw @ rpm) 30 @ 1800 9 @ 1800 30 @ 1800 331 @ 1800 353 @ 1800 353 @ 1800 - Wheel Base (Min-Max) 310-005 380-530 3855-005 3855-005 3855-005 3855-005 Torque (Nm @ rpm) 183@00 181 @ 00 183 @ 00 15 @ 00 15 @ 00 15 @ 00 T R - Width Across Rear Wheels Mass Data (kg) OH CH Valve Configuration A - Front 9000 19900 D/T 5000 5000 5000 5000 5000 GA - Front GA - Rear 1800 500 1800 1800 1800 1000 GCM 5500 5000 5000 5000 5000 GVM 19000 Tare - Front 10 00 15 00 00 00 Tare - Rear 3990 35 50 50 50 150 Tare - Total (Incl. Spare Wheel) 800 55 8595 0 V - rating 5500 1500 5500 5500 5500 5500 First Gear Grade- (At Max. gvm) 53.3 0.1 8.8 3 3 3 0 1 131 131 1 Transmission Wheels & Tyres 1 HR HR Approx. Body + Payload Allowance Geared Speed-km/h (Max Power rpm) HF HF OH CH Performance Fuel Tank FT F T HR FT F T F T Gear Ratio : 1.30-0.595 1.10-0.8 1.10-0.8 1.10-0.8 1.10-0.8 1.10-0.8 Gearshift Operation Cable Make Model HX0 AS 30 TO AS 30 TO AS 30 TO AS 30 TO AS 30 TO Number of Forward Gears 1 1 1 1 1 PTO & Control Reverse Ratio : 1.153 13.0/10.81 13.0/10.81 13.0/10.81 13.0/10.81 13.0/10.81 Attachment 10 Stud ISO Type Load/Speed Index - Dual Wheel Load/Speed Index - Single Wheel Number of Wheels Including Spare Spare Wheel Carrier Tyre Construction Tyre Size Wheel Size Wheel Type Capacity ( cc ) 300 390 HF CH OH Type of Cylinders (Liners: Wet or Dry) A - Rear OH CH CH OH OH CH x x FT Model description Aspiration Dimensions (mm) 88 TT DSC Air (AMT) 88 TT DSC 85 TT DSC 81 TT SSC 038 TT DSC 3. Air (AMT) 81 Tipper Model description Category type Category type *Service Intervals RAS RAS RAS 0 000 kms dependent on application and operating conditions
HINO VALUE-ADDED SERVICES HOW HINO GOES THE DISTANCE FOR ITS CUSTOMERS While is renowned for its exceptional quality, durability and reliability, peace of mind is also part of s customer-focused and service heritage. Care provides comprehensive support and service from warranties to spare parts replacement to roadside assistance. TOWING ASSISTANCE Recovery towing services to the nearest dealer for repairs or to a safe location WARRANTY PERIOD 00 Series 3 months, unlimited kms (on-road) months, unlimited kms (off-road) SERVICE INTERVALS 00 Series 0 000 kms* * Dependent on application and operating conditions Speak to your dealer for more information -HOUR ROADSIDE ASSISTANCE dealer service and parts assistance s Dealer Network is more than 50 strong in Southern Africa -hour call centre 0800 88 5 (0800 UCKS) Technically-trained staff for breakdown assistance Roadside security in the event that your vehicle breaks down in an unsafe area MAINTENANCE AND SERVICE PLANS These can be tailor-made to your requirements Speak to your dealer for more information
10000001MH/ Date: 09/01 Part no. 00BL Waste Tyre Reg No. TPREG0031GAU Certain vehicle details and specifications contained in this brochure may differ from the available models. Motors limited and South Africa reserves the right to alter any details of specifications and equipment without notice. For the most current information on prices and specifications, as well as comprehensive information about products offered by, contact your dealer, or South Africa. Call 0800 139 1 or visit www.hino.co.za