LowViscosity Housing Filter LVH-F

Similar documents
LowViscosity Housing- Coalescer Diesel LVH-CD

MultiRheo Filter MRF 1/2/3/4/5/6/7

MultiRheo Filter MRF 1/2/3/4/5/6/7

Mobile Filter Unit MFU-15

Process Inline Filter Medium / High Pressure PFM / PFH

Process screen basket filter PRFS

Change-Over Inline Filter AFLD to API 614

Process Multi-Rheo Filter PMRF

Change-Over Pressure Filter DFDK

Pressure Filter DF...K P, DF...M P, Flange Mounted

Process Inline Filter Protective filter PLF2-9HF

Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX

Process Inline Filter PLF1

Return Line Filter RF

Inline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron

Inline filters NF NF 1350 NF 330 NF 750 NF 500 NF FILTER SPECIFICATIONS Nominal pressure

Suction Filters S8-455 SE56-560

Change-Over Inline Filter RFLD Welded Version

Pressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 500 l/min Pressure range up to 315 bar Material: SG Iron/ADI, Steel

Return Line Filter RFM with 4-Hole Mounting

Inline Filter RFL. Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar

Return Line Filter RF

Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF

Return Line Filter HF4R up to 450 l/min, up to 10 bar

HYDAC LowViscosity Housings: Highest diesel quality on the whole transport route

Inline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar

Inline Filter RFLD. Change-Over. Cast Version Flow Rates up to 1300 l/min* Pressure Range 25/40/64 bar With Ball Change-Over Valve E /01.

Return Line Filter RFM with 4-Hole Mounting

Inline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04

EN / Modern Duplex Filters for Large Engines

Conditioning Module Reservoir Extraction CM-RE

Suction Filter SF/SFM/SFF and Suction Filter Elements S/S..

MRF D3 MultiRheo Filter

HYDAC Fluidtechnik: Industrial Valves FLOW CNTROL VALVE COMPENSATED PRESSURE VP-SR X.XXX.0/01.09 E / D E /08.

Return line and Suction Boost Filter RKM

Feed Pumps VP / VPB / VPBM

Return Line Filter RFM with 2-Hole Mounting

Backflushing Filter AutoFilt RF3

Automatic back-flushing filter AutoFilt RF4

Change-Over Inline Filter RFLD Weld Version

Spare Parts List Filter NFD Change-Over Version

Backflushing Filter AutoFilt RF4

Suction Filter SF/SFM/SFF and Suction Filter Elements S and S..

Industrial Valves Flow Control Valve ZW SDR - Modular

High-pressure inline filter, flangeable

Court of Registration: Saarbrücken, HRB Haering

HIGH PRESSURE FILTERS

Spare parts list Inline filter FLND switchable

High Pressure Filter Pi 4230

Series RFLD Duplex In-Line Filter

Duplex Filter Pi Features. Nominal pressure 25 bar (360 psi), nominal size 800 and 1400

2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design)

Mobile Filter Units Pi 8100

LVU-CD-40 LowViscosity Unit CoalescerDiesel

5.2 MEDIUM HEAVY DUTY SERIES SIZE 3

Duplex Filter Pi Features. Nominal pressure 40 bar (570 psi), nominal size 800 and 1100

Oil Filter Module Pi 8300

Block mounting filter, lateral flange-mounting possible

Oil Filter Module Pi 8300

HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm

Spare Parts List Return line filter RF

Industrial Valves Check Valve ZW RV / ZW RP - Modular

Automatic Back-Flushing Filter for Process Technology AutoFilt RF3.

High Pressure Filter Pi 4230

Line filter. Features. RE 51400/01.09 Replaces: Types 40/100 LEN 0040 to 0400; 40/100 LE 0003, 0015, 0018

Inline filter. Features RE 51401/ Types 40 FLEN 0160 to 1000; 40 FLE 0045, 0055, 0120 to 0270

Series RFL In-Line Filter

Inline Filter DMG DMG 080 DMG 045 DMG FILTER SPECIFICATIONS. Temperature range -10 C to +100 C Material of filter housing

HD 790 HD 990 In-line mounting Operating pressure up to 630 bar Nominal flow rate up to l/min

Filter Elements. for use in HYDAC filters* Pressure filter. Pressure filter. filter element (DIN 24550) elements. long seam weld

Line filter Pi Features. Nominal pressure 16 bar (230 psi), nominal size 400 up to 6000

Filtromat OF5LxxPxMxB

Innovative Element Technology for installation in HYDAC filters E / Quick Selection -

Spare parts list Return line filter RFM with 2-hole attachment

HD 790 HD 990 In-line mounting Operating pressure up to 630 bar / 9137 psi Nominal flow rate up to l/min / gpm

FMM-P-L. FluidMonitoring Module. Installation and Maintenance Instructions. English (translation of original instructions) Document No.

LS 025 LS 035 In-line mounting Connection up to G¾ / -12 SAE Nominal flow rate up to 33 l/min / 8.7 gpm

MEDIUM PRESSURE FILTERS

LVU-CD-10 LowViscosity Unit CoaleserDiesel

Replacement cartridge filter

HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm

Spin-on elements. Type 80, 81 and 82. Contents. Features. RE Edition:

5.1 MEDIUM HEAVY DUTY SERIES SIZE 2

LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 224 gpm

LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm

ES 134 ES 144 Tank top mounting Connection up to SAE 1½ Nominal flow rate up to 130 l/min

Spare Parts List Tank-Top Return Line Filter RFN with Elements to DIN up to 630 l/min, up to 10 bar

High Pressure Filters HD 044 HD 064. Flangeable Operating pressure up to 500 bar Nominal flow rate up to 105 l/min e

Spare Parts List Return Line Filter RFM with 4-hole attachment

3/2 Way Ball Valves KHB3K

Air Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11

AutoFilt RF3 Automatic Self-Cleaning Filter

FILTER ELEMENTS. Overview of Elements PN# / / FIL

Duplex Filter Pi Features. Nominal pressure 40 bar (580 psi), nominal size up to 300

High Pressure Filter Pi 4000

FN 060 FN 300 In-line mounting Operating pressure up to 12 bar / 174 psi Nominal flow rate up to 650 l/min / 172 gpm

LMP series

Low Pressure Filter Pi 2300

HIGH PRESSURE FILTERS

HPK04 Max Flow: 120 gpm (454 lpm)

Transcription:

LowViscosity Housing Filter LVH-F Description The LowViscosity-Housing Filter LVH-F is mainly used to filter low-viscosity fluids. It is especially suitable for applications with large amounts of dirt that need to be removed in just a single pass. The Optimicron filter elements used here ensure that both the required cleanliness and a long service life are achieved. Available in various sizes, the filters can be optimally integrated into new or existing systems. The filters are designed according to the AD2000 German rules and regulations for pressure vessels or according to ASME. Applications Diesel filtration for high flow rates Water filtration (e.g. in reverse osmosis applications) The advantages to you Excellent filtration performance in a single pass High contamination retention capacity and low losses in pressure thanks to Helios pleated geometry Easy to service thanks to intelligent element design Easy to upgrade with coalescing and separation housings in order to remove water from diesel fuel Technical data General data 110 120 Sizes 115 130 140 340 440 540 840 Material housing Aluminum Aluminum Stainless steel or carbon steel Connection inlet/outlet G 1" SAE DN 50 DN 50 300 SAE DN 80 Maximum operating pressure 10 bar 10 bar 10 bar Maximum operating 70 C 70 C 70 C temperature Maximum ambient 50 C 50 C 50 C temperature Seal material FKM (FPM, Viton ) FKM (FPM, Viton ) FKM (FPM, Viton ) Filter elements Filter elements used Optimicron Diesel Filter calculation Optimicron Diesel Optimicron Diesel Filter Size Maximum flow rate Filter element type Empty weight Housing volume LVH-F-1 10 40 l/min N10ON-DF-xxxFA41F 5 kg 3 liters LVH-F-1 20 80 l/min N16ON-DF-xxxFA42F 6 kg 6 liters LVH-F-1 15 270 l/min N20ON-DF-xxxFA41F 25 kg 13 liters LVH-F-1 30 500 l/min N32ON-DF-xxxFA42F 37 kg 25 liters LVH-F-1 40 800 l/min N42ON-DF-xxxFA40F 90 kg 55 liter LVH-F-3 40 1200 l/min N42ON-DF-xxxFA40F 205 kg 210 liter LVH-F-4 40 1800 l/min N42ON-DF-xxxFA40F 255 kg 276 liter LVH-F-5 40 2400 l/min N42ON-DF-xxxFA40F 340 kg 300 liter LVH-F-8 40 3600 l/min N42ON-DF-xxxFA40F 410 kg 540 liter E 76580 LVH-F en 2015-09-11.doc E 7.658.0 1 / 11

Model Code LVH F 3 40 E V C V F D13 /-ZA Type LVH = LowViscosity Housing Function F = Filter Filter Size 1 = 1 Filter element 3 = 3 Filter elements 4 = 4 Filter elements 5 = 5 Filter elements 8 = 8 Filter elements Filter element length 10 = 10 (for 1 Filter element, only) 15 = 15 (for 1 Filter element, only) 20 = 20 (for 1 Filter element, only) 30 = 30 (for 1 Filter element, only) 40 = 40 Housing material A = Aluminum (only sizes 115, 120, 130) E = Stainless steel (only sizes 140 to 840) C = Carbon steel (only sizes 140 to 840) Version V = vertical H = horizontal (only sizes 140 to 840) Pressure range B = 10 bar X = others (on request) Hydraulic connection (AD2000) 110 115 120 130 140 340 440 540 840 D = G1 X X - - - - - - L = SAE DN 50 - X - X - - - - - L = DIN DN 50 - - - - X X X X X N = SAE DN 80 - X - X - - - - - T = DIN DN 100 - - - - X X X X X V = DIN DN 150 - - - - X X X X X W = DIN DN 200 - - - - X X X X X Y = DIN DN 300 - - - - X X X X X Hydraulic connection (ASME) 110 115 120 130 140 340 440 540 840 3 = 2 - - - - X X X X X 4 = 3 - - - - X X X X X 5 = 4 - - - - X X X X X 8 = 6 - - - - X X X X X Material of sealings F = FKM (FPM, Viton ) Clogging indicator for housing material A and C C = Differential pressure indicator, electrical (VM2C.0) D3 = Differential pressure indicator, visual/electrical (VM2D.0/-220) D4 = Differential pressure indicator, visual/electrical (VM2D.0/-L24) D24 = Differential pressure indicator, visual/electrical (VL2GW.0/-V-113) D43 = Differential pressure gauge, visual D44 = Differential pressure indicator, visual/electrical Z = without Clogging Indicator Clogging indicator for housing material E C12 = Differential pressure indicator, electrical D17 = Differential pressure indicator, visual/electrical (230V) D18 = Differential pressure indicator, visual/electrical (24V) D32 = Differential pressure indicator, visual/electrical (PVL2GW.0/-V-113) D43 = Differential pressure gauge, visual D44 = Differential pressure indicator, visual/electrical Z = Without clogging indicator Supplementary details Z = Manufacturer certificate M to DIN 55350 Part 18 Test certificate 3.1 to EN 10204 (material certificate) ZA = Manufacturer certificate M to DIN 55350 Part 18 Test certificate 3.1 to DIN EN 10204 (material certificate) and calculation according ASME 150 = 150 lbs (flange pressure level, for ASME housing design) Scope of Delivery LVH-F (without filter elements) Installation and Maintenance Instructions Filter elements must be ordered separately and installed before initial operation on site. Filter elements Description xxx = Filter element 10" N10ON-DFxxx-FA41F Filter element 15" N16ON-DFxxx-FA42F Filter element 20" N20ON-DFxxx-FA41F Filter element 30" N32ON-DFxxx-FA42F Filter element 40" N42ON-DFxxx-FA40F *) available on request Hydraulic diagram filtration rating 003 = 3 µm 005 = 5 µm 010 = 10 µm 020 = 20 µm 600 Clogging indicator 804 Drain, contaminated side (DRAIN) E 76580 LVH-F en 2015-09-11.doc E 7.658.0 2 / 11

Dimensions LVH-F-1 10- - xxx - xv - LVH-F-1 20- - xxx - xv - 600 clogging indicator (optional) 804 Drain 810 Air bleed E 76580 LVH-F en 2015-09-11.doc E 7.658.0 3 / 11

Dimensions LVH-F-1 15- -xxx - xv - 600 clogging indicator (optional) 804 Drain (DRAIN) 810 Air bleed E 76580 LVH-F en 2015-09-11.doc E 7.658.0 4 / 11

Dimensions LVH-F-1 30- -xxx - xv - 600 clogging indicator (optional) 804 Drain (DRAIN) 810 Air bleed E 76580 LVH-F en 2015-09-11.doc E 7.658.0 5 / 11

Dimensions LVH-F-1 40- -xxx - xv - graphs (Housing- p) Pressure drop curve LVH-F-1 600 clogging indicator (optional) E 76580 LVH-F en 2015-09-11.doc E 7.658.0 6 / 11

Dimensions LVH-F-3 40 xxx - xv - graphs (Housing- p) Pressure drop curve LVH-F-3 600 Clogging indicator (optional) 805 Cover lifting device 806 Eyelets for transportation / Lifting eyes E 76580 LVH-F en 2015-09-11.doc E 7.658.0 7 / 11

Dimensions LVH-F-4 40 xxx - xv - graphs (Housing- p) Pressure drop curve LVH-F-4 600 Clogging indicator (optional) 805 Cover lifting device 806 Eyelets for transportation / Lifting eyes E 76580 LVH-F en 2015-09-11.doc E 7.658.0 8 / 11

Dimensions LVH-F-5 40 xxx - xv - graphs (housing p) Pressure drop curve LVH-F-5 600 Clogging indicator (optional) 805 Cover lifting device 806 Eyelets for transportation / Lifting eyes E 76580 LVH-F en 2015-09-11.doc E 7.658.0 9 / 11

Dimensions LVH-F-8 40 xxx - xv - graphs (Housing- p) Pressure drop curve LVH-F-8 600 Clogging indicator (optional) 805 Cover lifting device 806 Eyelets for transportation / Lifting eyes E 76580 LVH-F en 2015-09-11.doc E 7.658.0 10 / 11

Dimensions LVH-F-8 40 xxx - xh - graphs (Housing- p) Pressure drop curve LVH-F-8 600 Clogging indicator (optional) 805 Cover lifting device 806 Eyelets for transportation / Lifting eyes 817 Air bleed at inlet (IN) 818 Air bleed at outlet (OUT) Note: The information in this brochure relates to the operating conditions and applications described. In the event of deviating applications and/or operating conditions, please contact the respective HYDAC department concerned. Subject to technical modifications. HYDAC FILTER SYSTEMS GMBH Industriestrasse 66280 Sulzbach / Saar Germany Telephone: +49 (0)6897 / 509-01 Fax: +49 (0)6897 / 509-9046 Internet: www.hydac.com E-mail: filtersystems@hydac.com E 76580 LVH-F en 2015-09-11.doc E 7.658.0 11 / 11