Defense Grade Low-side and Highside Drivers / Switches. RobuST

Similar documents
PROFET + Benchmark Robustness and Diagnostics in Modular Packages

SC61A05. Standalone Linear Li-Lon Battery Charger. With Thermal Regulation. Features. Description. Applications

800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display

Standalone Linear Li-Ion Battery Charger with Thermal Regulation

Smart power solutions for car body applications

Classic PROFET TM July 2017

800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery

ME4054 Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT ME4054

OIS21C. Optical smart sensor for hydraulic cylinders. General Description. Features. Applications. Pin Functions. Ordering Information

Fully integrated constant current/constant voltage Li-ion battery charger

800mA Linear Li-Ion Battery Charger

Package: RN: SOT23-5 TRN: TSOT23-5 Features: P: Standard (default, lead free) C: Customized. 1uF

Reach Beyond Traditional Powering Scenarios with New Ultralow I Q Buck-Boost Converters

800mA Lithium Ion Battery Linear Charger

VS6102 Standalone Linear Lithium Battery Charger

COTAG GENERAL DESCRIPTION

800mA Lithium Ion Battery Linear Charger

1.2A Single-chip Li-ion and Li-POL Charge

2A Switch-Mode Li-Ion Battery Charger

2 cell Li-ion Battery Charge from 3V~12V

DIO5518D 300mA,Single Li-ion Battery Charger

DIO5538B 5~100mA,Single Li-ion Battery Charger

PT1054 Lithium Ion Battery Linear Charger

Body Smart Power. Intelligent Power & Body Smart Power Division

Enhanced Diagnostic and Protection of Motor Drivers to Assist Robust System Development. Ryan Kehr Application Manager TI Motor Drive

500mA Standalone Linear Li-Ion Battery Charger. Features

1.2A Single-chip Li-ion and Li-POL Charge

FEATURES. Charging. - High Voltage Chemistry Support: up to 4.35V. Others

500mA Linear Li-Ion Battery Charger in SOT23

2.5A, 3MHz Switching Charger with Dynamic Power Path in 8-pin ESOP SYS 2.2K STAT. 2A Switching Charger with Minimum Component Count

ACE4054C. 500mA/1.5A Standalone Linear Li-Ion Battery Charge

LSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET

DT V 1A Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION

HF Series Incremental Magnetic Encoder Decade Count High Resolution Kit

CE3211 Series. Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS:

Battery Equalizers & Converters

Battery Equalizers. UNCONTROLLED DOCUMENT Updated 6/01/11. Sure Power P/N. Output Current E00 60 amps. Stock No E00 80 amps

1A is compatible with the USB interface, linear battery management chip

300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator

5A Synchronous Buck Li-ion Charger With Adapter Adaptive

ST3S01PHD BATTERY CHARGE I.C.

1A/800mA Standalone Linear Li-Ion Battery Charger. Features

CE3152 Series. Standalone Linear LiFePO4 battery charger with Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS: PIN CONFIGURATION:

Techcode. Features. General Description. Applications. Package Types DATASHEET

CONSONANCE CN3051A/CN3052A. 500mA USB-Compatible Lithium Ion Battery Charger. General Description: Features: Pin Assignment.

High Voltage Solutions in HEV/EV Part II: - DC/DC Converters and Traction Inverters. Hong Huang

SPHV-C Series 200W Discrete Bidirectional TVS Diode

Ultimate Power Perfect Control Complete automotive solutions from Infineon

A4063. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION

3.5A Synchronous Buck Li-ion Charger With Intelligent Path Management Adapter Adaptive and OTG

DT V 800mA Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION

ACT V/1.5A Backup Battery Pack Manager FEATURES APPLICATIONS GENERAL DESCRIPTION. Rev 0, 06-Nov-13 Product Brief

N4 Series Magnetic Encoder Module High Resolution Module

SM24CANB Series 500W TVS Diode Array

Rev1.0 UCT V 1A Standalone Linear Li-ion Battery Charger GENERAL DESCRIPTION FEATURES APPLICATIONS

3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor

POWER PROFET A simpler solution with integrated protection for switching high-current applications efficiently & reliably

User Manual. Wind and Solar Hybrid Charge Controller 1KW / 2KW 48VDC. HCON Series

ETA mA Fully Integrated Linear Charger for 1 Cell Li-ion Battery APPLICATIONS ORDERING INFORMATION TYPICAL APPLICATION

Lithium Battery Protection Integrated Circuit

Power Conversion Systems 2005/2006. Schaefer the Power to make it happen.

PART MAX1612EEE MAX1613EEE TOP VIEW BBATT LRI +3.3V +5V V CPU

ETA A, 3MHz Switching Charger with Dynamic Power Path Management

LSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET

FEATURES TYPICAL APPLICATIO. LTC4062 Standalone Linear Li-Ion Battery Charger with Micropower Comparator DESCRIPTIO APPLICATIO S

Panel Model Adjust Adjust Power 5Hz-1MHz 20MHz BW 5Hz-1MHz % Output Jacks Range Range (W) (mv) (mv) (ma) ( VAC) (Option)

AQHV Series 200W Discrete Unidirectional TVS Diode

25 to 30 Watt XW Single Series DC/DC Converters

REGULATORS SYNCHRONOUS STEP DOWN (BUCK) Feedback Voltage (V) Switching Freq (khz) MP Internal Internal Comp

Advanced Lithium-Ion Linear Battery Charger

FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION PIN OUT & MARKING. Max.2A Li-ion Switching Charger IC

BL8578 DESCRIPTION FEATURES APPLICATIONS PIN OUT & MARKING TYPICAL APPLICATION. Max.2A Li-ion Switching Charger IC

CE3150B Series. Standalone Linear Li-Ion Battery Charger with Thermal Regulation

LSIC1MO170E V N-channel, Enhancement-mode SiC MOSFET

BIDIRECTIONAL DC/DC CONVERTER

2A Synchronous Buck Li-ion Charger

Delphi D12S Non-Isolated Point of Load

Silvertel. Ag Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W output power

UAV EFI components In miniature sizes

Techcode. General Description. Features. Applications. Package Types DATASHEET. 1A Standalone Linear Li-lon Battery Charger with Thermal Regulation

1000 WATT 24S12.84FXM DC/DC CONVERTER

PRODUCT DATASHEET AAT3681

Emergency lighting units EM powerled

ECU1000 ELECTRONIC CONTROL UNIT

Advanced Power Electronics Corp.

1A Linear Li-Ion Battery Charger in SOP8/MSOP8

Low Power, Low Dropout, 250mA, RF - Linear Regulators

MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series

WATT MBH SERIES DC/DC CONVERTERS

General Description. Features. Component List. Component Suppliers

XA4202. The XA4202 is available in the 8-lead SO Package. Charging Docks Handheld Instruments Portable Computers.

Automotive/Transportation Heavy-Duty Transportation

CE3151 Series. Standalone Linear Li-Ion Battery Charger with Thermal Regulation

LTC4063 Standalone Linear Li-Ion Charger with Micropower Low Dropout Linear Regulator

Lithium Ion Battery Charger for Solar-Powered Systems

150 WATT HEW SINGLE SERIES DC/DC CONVERTERS

Solar Power Energy Harvesting Electrical Integration

HM5061 Max.1.6A Li-ion Switching Charger IC

Silvertel. Ag Features. Multi-Stage Charging. Battery Reversal Protection. Reduced Power Consumption. Wide DC or AC Input Voltage Range

Glass Encapsulated SMD Varistor MLV

Transcription:

Defense Grade Low-side and Highside Drivers / Switches RobuST

Candidate RobuST Product Offering 2 What is the difference between an Active RobuST device and a Candidate RobuST device? In addition to the active RobuST products listed on st.com, ST will evaluate the release of candidate RobuST devices based on your needs This guide contains both Active & Candidate RobuST devices. Candidate devices in this guide are in BOLD and will link to the commercial / industrial / automotive equivalent datasheet. Please see Candidate RobuST products listed in this document and contact ST Sales to submit a reuest form for your specific needs

What is the RobuST Product Offering? 3 What is a RobuST device? dedicated traceability and part marking production parts approval documents available adapted extended life time and obsolescence management extended product change notification (PCN) process designed and manufactured to meet sub ppm quality goals advanced mold and frame designs for superior resilience to harsh environment (acceleration, EMI, thermal, humidity) RobuST products are offered as standard as RobuST level C, extended screening to level A or B may be available on request

COTS Products COTS for A&D Product for A&D COTS What is RobuST? A&D COTS Products 4 Commercial / Industrial / Automotive Grade -40 C to +85/125 C Standard Datasheet HE : Harsh Environment RobuST ST Commercial & Industrial product Fully Available without restrictions RobuST products are intended to provide an affordable solution for volume Aerospace & Defense applications when use of standard products and processes is not possible and HIREL / Rad Hard products provided in ceramic packages may contain unnecessary features and related costs

What is RobuST? A&D Product Grade 5

RobuST Low Side Drivers/Switches

Low Side Switches 7 5V/3.3V DC 12V VIPower OmniFET III R ST VS Drain Load Protected power switching on the Low Side between the load and ground mc R R IN Status Gate Drive Protection Diagnostic Logic ICC Source Application Segments: Load Management LED and General Lighting Motor Control DC 12/24V Applications: Resistive Loads such as Heaters Inductive Loads such as Relays LED Illumination DC Motor Control PWM 12/24V Portable Electronics DC 12V/24V Resistive, Inductive, and Capacitive Loads

Fully Protected Low Side Switches 8 New OmniFET III features 5-Pin Devices DRAIN External supply pin Low current consumption from battery in OFF-state Enhanced short-circuit robustness Current and Power Limitation Separate Status Pin ON and OFF state diagnostics SUPPLY INPUT Undervoltage Logic Control Thermal Sensoring Overvoltage Clamp Current/ Power Limiter STATUS General Features 41V MIN CLAMP VOLTAGE LINEAR CURRENT LIMITATION 3V COMPATIBLE INPUT THERMAL SHUT DOWN SHORT CIRCUIT PROTECTION OVER TEMPERATURE PROTECTION INTEGRATED CLAMP DIAGNOSTIC FEEDBACK ESD PROTECTION COMPATIBLE WITH LOGIC LEVEL STANDARD POWER MOSFET (3 PIN CONFIGURATION) 3-Pin Devices Undervoltage Logic INPUT Control Thermal Sensoring Overvoltage Clamp Current/ Power Limiter SOURCE DRAIN SOT-223 SO8 Double Pad Power SSO12 Pin Compatible with Power MOS SOURCE

Low Side Drivers/Switches 9 Part Number Package Plating Technology Temp. range Tj (ºC) min max Clamp Voltage typ (V) Drain Current Limit type (A) RDS(on) max (mω) Number of Channels nominal Digital status RVNB14NV04TR D2PAK Matte Tin M0-3 -40 +150 45 18 35 1 - RVNB35N07TR D2PAK Matte Tin M0-3 -40 +150 70 35 28 1 - RVNB35NV04TR D2PAK Matte Tin M0-3 -40 +150 45 45 10 1 - RVND14NV04TR TO 252 DPAK Matte Tin M0-3 -40 +150 45 18 35 1 - RVNL5050S5TR SO-8 NiPdAu M0-5 -40 +150 46 27 50 1 RVNL5090S5TR SO-8 NiPdAu M0-5 -40 +150 46 18 90 1 RVNL5160S5TR SO-8 NiPdAu M0-5 -40 +150 46 5 160 1 RVNL5300S5TR SO-8 NiPdAu M0-5 -40 +150 46-300 - RVNLD5300TR SO-8 NiPdAu M0-5 -40 +150 46 2 300 2 RVNS1NV04PTR SO-8 NiPdAu M0-3 -40 +150 45 2.6 250 1 - RVNS3NV04DPTR SO-8 NiPdAu M0-3 -40 +150 45 5 120 2 - RVNS7NV04PTR SO-8 NiPdAu M0-3 -40 +150 45 9 65 1 -

RobuST High Side Drivers/Switches

Smart Power for High Side Switches VIPower M0-5x 11 Overview Voltage ratings ranging from 4.5V to 58V multi-channel configurations (1, 2, & 4ch) RDS(ON) values from 4 to 250mΩ analog or digital load diagnostics thermally efficient packages Use Cases Load Management Resistive Loads Inductive Loads Capacitive Loads LED Illumination DC Power Switching for Peripheral Electronics DC Motor Control Battery Management HIGH Side Switches + 5V DC 12/24V RIN INPUT Vcc SCB ICC mc RS T Status Sense ISENSE Logic + Driver GND OUT Load VSENSE RSENSE RGND DGN D SCG

VIPower M0-7 Product Family: 12 Technology Roadmap Key features and real benefits M0-1 PowerSO-10 R (on) = 50mΩ Full Production M0-3 M0-2 PowerSO-10 R (on) = 20mΩ PowerSO-10 R (on) = 10mΩ M0-5 PowerSO-10 R (on) = 6mΩ R (on) = 3.6mΩ M0-6 PowerSO-10 R (on) = 3.6mΩ Hybrid Architecture M0-7 PowerSO-10 R (on) = 4mΩ R (on) = 2.5mΩ 1992 1995 2000 2006 2010 2013 Superior Robustness & Reliability Through: Power Limitation Flexible Latch-Off Functionality Multi-sense diagnostic for Enhanced System Safety, thanks to: Temperature Monitoring Vcc Monitoring Output Current Sensing Full ON- and OFF-state Diagnostics Capability Bulb / LED mode Reverse Polarity Protection (for Hybrid Architecture) Optimized EMI Performance through Enhanced Gate Driver Concept Low Quiescent Current

Single - Single Dual - Dual M0-7 Family values 13 The best solution for interior and exterior Lighting (Full load coverage ) 4mW 7mW 10mW 16mW 20mW 30mW 40mW 50mW 140mW R ON Output Power High Power Xenon Underhood HB / LB / FOG 59W (2x27W + 5W) 47W (2x21W + 5W) 32W (27W + 5W) 27W/21W 1A - 2A LED 5W / 6W / 10W / 12W 0.2A - 1A LED with total flexibility PSSO-16: all in one package SO-8: Cost optim d OCTAPAK Hi-Power INPUT0 FaultRST 1 2 16 15 OUT0 OUT0 INPUT0 FaultRST 1 2 16 15 OUT0 OUT0 SEn GND SEL0 SEL1 MultiSense N.C. 3 4 5 6 7 8 PSSO-16 Single VCC 14 13 12 11 10 9 OUT0 OUT0 N.C. N.C. N.C. N.C. SEn GND SEL0 SEL1 MultiSense INPUT1 3 4 5 6 7 8 PSSO-16 Dual VCC 14 13 12 11 10 9 OUT0 OUT0 OUT1 OUT1 OUT1 OUT1 RVN7010AJ RVN7016AJ RVN7020AJ RVN7040AJ RVN7050AJ RVN7140AJ Single - Dual RVND7020AJ RVND7030AJ RVND7040AJ RVND7050AJ RVND7140AJ RVN7040AS RVN7050AS RVN7140AS RVN7007AH RVN7004AH

RobuST High Side Switches 14 Part Number Package Plating Technology Supply Voltage (Vdd) Temp. range Tj (ºC) min (V) max (V) min max Max onstate resistance Ron(mΩ) Drain Current limit typ (A) Absolute max supply voltage (V) Number of Channels nominal Digital status Current sense RVN5010AKTR PowerSSO24 Matte Tin M0-5 4.5 36-40 +150 10 65 41 1 - RVN5016AJTR PowerSSO12 Matte Tin M0-5 4.5 36-40 +150 16 60 41 1 - RVN5050AJTR PowerSSO12 Matte Tin M0-5 4.5 36-40 +150 50 18 41 1 - RVN5E006ASPTR PowerSO-10 Matte Tin M0-5Enhanced 4.5 28-40 +150 6 100 41 1 - RVN5E010MHTR TO-252 6L Matte Tin M0-5 Enhanced (MVers.) 4.5 28-40 +150 10 85 41 1 - RVND5004ASP30TR RVND5004ATR SO- 30MultiPower QFPN PW 24lead Matte Tin M0-5 - 36-40 +150 4 - - 2 - - Matte Tin M0-5 - 36-40 +150 4 - - 2 - - RVND5050AJTR PowerSSO12 Matte Tin M0-5 4.5 36-40 +150 50 18 41 2 - RVND5160AJTR PowerSSO12 Matte Tin M0-5 4.5 36-40 +150 160 5 41 2 - RVND5160JTR PowerSSO12 Matte Tin M0-5 4.5 36-40 +150 160 5 41 2 - RVND5E006ASPTR PowerSO16 Matte Tin M0-5 Enhanced 4.5 28-40 +150 6 100 41 2 - RVND5E008MYTR PWSSO36 Matte Tin M0-5 Enhanced (MVers.) 4.5 28-40 +150 8 85 41 2 - RVND5E012AYTR PWSSO36 Matte Tin M0-5 Enhanced 4.5 28-40 +150 12 74 41 2 - RVND5E025AKTR PowerSSO24 Matte Tin M0-5 Enhanced 4.5 28-40 +150 25 60 41 2 - RVND5E025MKTR PowerSSO24 Matte Tin M0-5 Enhanced (MVers.) 4.5 28-40 +150 25 60 41 2 -

RobuST High Side Switches 15 Part Number Package Plating Technology Supply Voltage (Vdd) min (V) max (V) Temp. range Tj (ºC) min max Max on-state resistance Ron(mΩ) Drain Current limit (Ilim) typ (A) Absolute max supply voltage (V) Number of Channels nominal Digital status Current sense RVND5E160AJTR PowerSSO12 Matte Tin M0-5 Enhanced 4.5 28-40 +150 160 10 41 2 - RVND5E160JTR PowerSSO12 Matte Tin M0-5 Enhanced 4.5 28-40 +150 160 10 41 2 - RVND5E160MJTR PowerSSO12 Matte Tin M0-5 Enhanced (MVers.) 4.5 28-40 +150 160 10 41 2 - RVNQ5027AKTR PowerSSO24 Matte Tin M0-5 4.5 36-40 +150 27 40 41 4 - RVNQ5160KTR PowerSSO24 Matte Tin M0-5 4.5 36-40 +150 160 5 41 4 - RVNQ5E050KTR PowerSSO24 Matte Tin M0-5 Enhanced 4.5 28-40 +150 50 27 41 4 - RVNQ5E160AKTR PowerSSO24 Matte Tin M0-5 Enhanced 4.5 28-40 +150 160 10 41 4 - RVNQ5E160MKTR PowerSSO24 Matte Tin M0-5 Enhanced (MVers.) 4.5 28-40 +150 160 10 41 4 - RVNQ5E250AJTR PowerSSO16 Matte Tin M0-5 Enhanced 4.5 28-40 +150 250 5 41 4 -

VIPower M05T: Product Portfolio for 24V Systems Optimized solutions covering broad range applications Key features and benefits 16 6mΩ < 100W 16mΩ 75W 35mΩ 55W 50mΩ 42W 100mΩ 21W 100mΩ( L version) 50 mω( L version) 35mΩ( L version) LED (50mA -100mA) Operating Voltage Range: 8V 36V Jump Start Voltage Capability (48V) Clamping Voltage: >58V Enhanced Energy Capability Extreme low Stand By Current Programmable Latch-off Product Portfolio Diagnostic Features Proportional Load Current Sense Off State Open Load Detection Output Short to Vcc Detection Very Low Current Sense Leakage Device Number of Channel Ron [mohm] Package RVN5T006ASP 1 6 PowerSO-10 RVN5T016AH 1 16 HPAK RVND5T016ASP 2 16 PowerSO-16 RVND5T035AK 2 35 PowerSSO-24 RVND5T035LAK (LED) 2 35 PowerSSO-24 RVND5T050AK 2 50 PowerSSO-24 RVND5T100AJ 2 100 PowerSSO-12 RVND5T100LAJ (LED) 2 100 PowerSSO-13 Protections Overload and Short to Ground (with and w/o Latch-off) Thermal Shutdown (with and w/o Latch-off) Under-voltage Shutdown Over-voltage Clamp Load Current Limitation Self-limiting of Fast Thermal Transients (Power Limitation ST IP) Protection against Loss of Ground and Loss of Vcc Reverse Battery Protection (Hybrid) Electrostatic Discharge Protection

RobuST High Side Switches 17 For 24V Applications Part Number Package Plating Technolog y Temp. range Tj (ºC) min max min (V) Supply Voltage (V cc ) Absolute max (V) max supply voltage (V) Max on-state resistance R on (mω) Drain Current limit (I lim ) typ (A) Current sense RVND5T016ASPTR PowerSSO-16 Matte Tin MO-5T -40 +150 8 36 58 16 60 RVN5T016AHTR TO-252 (HPAK) Matte Tin MO-5T -40 +150 8 36 58 16 67 RVN5T006ASPTR PowerSSO-10 Matte Tin MO-5T -40 +150 8 36 58 6 84

RobuST Configurable Drivers/Switches

RL9733 Octal driver with SPI 3 channels with direct drive 19 Highly Flexible device, allowing to set the output channels either as High Side Drive or Low Side Drive The output pins configuration may be self-configurable (depending by the load applied) or externally configurable via SPI pins Motors Relays LEDs Bulb Load Resistive Capacitive Inductive Full channel control with Pin Fully flexible channel usage (HSD/LSD)

Configurable High/Low Side Switches 20 Part Number Package Plati ng Technolog y min Temp. range Tj (ºC) max Clamping Voltage (V) Driver stages On-state resistance R on (mω) Current limitation (I lim ) typ (A) Max supply voltage V cc (V) RL9733XP/XPTR PowerSSO-28 Matte Tin BCD4-40 +150 40 8 x powermos 1000 1 16 RL99MC6TR PowerSSO-16 Matte Tin BCD4s -40 +150 700 0.6 5.5