Pneumatic Connectors, Tubing & Cylinder Control Accessories

Similar documents
Prestolok 2. Push-in fitting. Catalogue UK

Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options

Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...

Pneufit Push-in Tube Fittings Metric

LF 3600 Push-In Fittings Range

connection solutions in stainless steel

Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings.

A Complete Range of Adaptors

Compression Fittings 36 Series Metric

atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision

LF 3600 Push-In Fittings

Pneufit C composite and Pneufit M fittings Inch

Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:

Group 16. Fittings Brass - Galvanized, AISI Pneumatics

FIT-2. Inch. Ø Â" to Ë" O/D tube

Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings

Applicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications

ONE TOUCH FITTINGS Series WP2

Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings

Brass Compression Fitting Range

Tubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated

83 series Brass compression fittings Ø 1/ nominal pipe size, NPT thread

Light Coupling Series

Stainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut

82 series Brass compression fittings

Minimal Fitting Series

Composite Push-In Fittings BSP/Metric Series 7000

83 series Brass compression fittings

Main Block Series. Concentrated Branching Joint for Assembly. Assembling Manifold Blocks for Concentrated Branching

Tube Applicable for nylon, soft nylon and polyurethane tubing.

Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5

Function Fittings, Flow Controls, and Accessory Valves

LF 3800/LF 3900 Push-In Fittings Range

Miniature Fittings Series M

Schrader Range. Pneumatic. Quick Acting Pneumatic Couplings Schrader original range InterCheck range Mini range Euro range. Catalogue 2167GB-ca

Fittings Metal Push-To- Connect Fittings. We make things MOVE

Hi-Duty Flareless Tube Fittings

Valve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck

EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI

Flow Controls & Accessories

Brass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.

Digital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK

for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint

82 Series Fittings Table of Contents

Pneumatics CONTENT

FITTINGS, CONTROLS AND ACCESSORIES

TrueSeal Thermoplastic Push-In Fittings

Tubing & Hose Metric. Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel

Brass Compression Fitting Range

Rapid push-in fittings for plastic tubes Series 1000

Insert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly

Series 10-M. RoHS. Miniature Fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap Nut. Gasket. Body. Gasket.

Flow Controls & Accessories

Compression Style Transportation

Tubing & Fittings G97. Catalog 9EM-TK-190-5

INOX PrOgram made by eisele

Tube Fitting EG Series

LIQUIfit Push-In Fittings with Metal Adaptors

Pneumatic Connectors handbook. Catalogue 0093-UK January 2002

Hose, Tubes & Ducting. Hose, Tubes & Ducting

PRODUCT DIRECTORY OUR GENIUS IS FITTINGS. Issue 1. Nickel Plated Brass BSP Fittings. Compression Fittings

Pneumatic Fittings & Tubing

Tube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications

2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6

Local solutions for individual customers worldwide PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES STAUFF UK. Super Air Service!

Cartridges and Customised Products

Products Recommended for Steam Service

Series 870 Sleeve coupling for repairs Sizes Ø 25, Ø 32, Ø 40, Ø 50

Messing. screw-in connectors

pneumatic function fittings

LIQUIfit Push-In Fittings

BASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.

Cartridges & Manifolds

Hose, Tubes & Ducting. Hose, Tubes & Ducting

Cartridges & Manifolds

Tube Fitting Stainless SUS316 Series

COUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories

Tubing Cutter for 1/16" Stainless Steel Tubing

Tube Fitting PP Series

Flow Controls & Accessories

Tube Fitting Brass Series

HelaGuard. Non-Metallic Conduit & Fittings

Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR

Lincoln installation components, accessories and lubrication fittings

Male - Swivel B-168. Female - Swivel. Female - Swivel B-170. Standpipe. Female - Swivel 90 Elbow - Long 3D082 B-172.

H/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications

Power distribution components

Pneumatic Tubing. Nylon. Nylon Fractional Inch Tubing. Nylon Metric Tubing. Capillary Tubing

ABS Pipe metric system Plain PN10

Seal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED)

37 flare couplings to ISO

FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:

Applicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material

Pipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads

Series 10-M. Miniature fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap nut. Gasket. Body. Gasket Low tightening torque Tight seal

Cable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings

IDF / ISS Hygienic Union BS 4825 Part 4

BRASS FITTINGS and Related Products

Transcription:

Pneumatic Pneumatic onnectors, Tubing & ylinder ontrol ccessories 290 G-ca

Index Page No Push-in Fittings Overview.3 -.7 Push-in Fittings.8 -.22 Push-in Fitting Dimensions.23 -.47 ylinder ontrol ccessories 2. - 2.27 Flexible Pneumatic Tubing Overview 3. - 3.3 Nylon Tubing 3.4-3.6 Polyurethane Tubing 3.7-3.9 Tubing ccessories 3.0 Exhaust Silencers Overview 4. - 4.3 Exhaust Silencers 4.4-4.9 Pneumatic.2

Prestolok Fittings Prestolok icro Prestolok 2 Prestolok For tube Ø mm 3-6 4-4 4-4 Refer to page Threads etric 3x0,5-5x0,8 5x0,8 5x0,8 SPP /8, /4 /8-/2 /8-/2 SPT /8, /4 /8-/2 /8-/2 aterial, body - Plastic - rass (nickel plated) Stud fittings 8-9 Threaded 90 Elbows 0 - Threaded Tee's 2-3 Threaded Y-connectors 4-5 Threaded ultiple Fittings 4-5 Tube to Tube Straight Unions 6 Tube to Tube 90 O Elbows 6 Tube to Tube Tee's 6 Tube to Tube Y-connectors 7 Tube to Tube ultiple Tee's 7 Reducers 8 Expanders 8 Plugs 8 Unions 8 Indicators 8 Plug-in 90 O Elbow 9 Plug-in Tee's 9 Plug-in Y-connectors 9 ulkhead Fittings 20 anifolds 20 anjo's 2 Protective aps 22 Pneumatic.3

Prestolok Fittings Prestolok icro High resistance polyamide body Stud fittings brass nickle plated iniature Fittings with full flow capacity Teflon coated SPT threads Face seal with SPP threads Positive hold with stainless steel grab ring Push button tube release For nylon or polyurethane tube Prestolok 2 High resistance polyamide body Stud fittings brass nickle plated Protective cap Ready-to-use fitting Posititive hold by a flexible grab ring Positive O-ring sealing Plastic push button Prestolok rass nickel plated body Use with plastic or metal tubing Positive hold by a flexible stainless steel grab ring Ready-to-use fitting Plastic push button Straight male connectors with internal hexagon For detailed information see technical leaflet Operating information Prestolok icro Prestolok 2 Prestolok Working pressure 0,0 to 6 bar 0,0 to 25 bar 0,0 to 25 bar Working temperature -25 to +80-25 to +70-25 to +00 Ordering information Prestolok fittings are sold in packs. The package quantities are indicated adjacent to the part numbers. When ordering, order by the quantity required. For example : to obtain 20 Prestolok 2 Equal Union 4mm Tees, purchase order should state:- Qty 20 JPK4 Note Orders received for Prestolok fittings in quantities other than pack quantity multiples will be rounded up to the nearest multiple Pneumatic.4

Prestolok icro Fittings dvantages Wide product range suitable for all applications. Full flow capacity. Perfect miniaturisation. The Prestolok icro concept offers : an ergonomic shape with small dimensions but allowing for excellent handling and manipulation of the fitting, compact dimensions allow efficient utilisation in applications where space is a decisive factor, reduced size and weight which, are very important when used with unsupported pipe runs, excellent flow characteristics give minimal pressure drop. multi-functional push-button. the new push button design encapsulates the fitting body to prevent contamination of the connection system, the profile of the push button enables simple and efficient disconnection of the tube, the marking of the tube diameter and the optional choice of colour on the push button enable simple identification of circuits, it ensures a uniform distribution of the pushing force for easy disconnection. the one piece design makes the push button unlosable. Ready to use fitting the Prestolok icro range of fittings is manufactured ready to use, saving time and reducing assembly costs, taper threads are treated with a special Parker Teflon oating (PT). This factory applied treatment enables the fitting to be connected and disconnected up to five times without additional treatment, fittings with parallel threads are supplied with a pre-assembled fully retained O-ring ensuring a perfect seal. Positive retention with a flexible grab rin this system, invented, developed and perfected by Parker, guarantees excellent tube retention, the special radial shape of the teeth of the grab ring do not damage the tube or affect the sealing, the elasticity of the grab ring absorbs all vibration and impulsing, the design of the grab ring allows the tube to rotate freely even under pressure. High resistance polyamide body. The use of high resistance polyamide offers : Excellent mechanical characteristics (robustness), High corrosion resistance, UV resistant polymers gurarantee a long service life. ounting holes on shaped fittings. On request, union connectors can be supplied equipped with mounting holes. This option permits : ounting in banks for compact installations and simplified pipework, Facility for mounting on frames or panels, Greater flexibility and additional space savin Pneumatic.5

Prestolok 2 Fittings dvantages Ready-to-use compact fitting Wide product range covering all applications Full flow capability Protective cap The design of the Prestolok 2 thermoplastic range permits the use of a protective cap for the following functions : protection : prevents the ingress of dirt into the connection system, safety : eliminates the risk of accidental disconnection, as the push-button is made inaccessible, identification : colour coding allows identification of fluid lines, tube sizes are marked on the protective cap. High resistance polyamide body The use of UV-resistant reinforced polyamide provides : weight saving, excellent mechanical performance, compact design. The three grooves facilitate handling and positioning of elbows and tees. long service life is ensured by the corrosion free body material. Ready-to-use fitting The Prestolok thermoplastic range is manufactured with brass nickel plated male threads ready for use : parallel threads are supplied with a pre-assembled, fully retained O-ring seal, taper threads are treated with a special Parker Teflon oating (PT) for self sealing on assembly, reusable up to five times without additional sealing material. Positive hold by a flexible grab ring The special shape of the radial teeth grab ring prevents longi-tudinal scratch marks on the tube. The elasticity of the grab ring absorbs vibration and pulsating pressure. twist-free assembly, the tube can rotate freely even under pressure. Positive O-ring sealing The smooth unmarked tube is in direct contact with the nitrile O-ring, giving a positive seal. unique back-up washer retains the O-ring in the optimum sealing position, protects it from the grab ring, and prevents extrusion under pressure. Plastic push button Simple manual pressure on the userfriendly push button allows instant disconnection of the tube. Tube sizes are marked on the push button for easy identification. How to use ssembly ut the tube square Insert the tube into the fitting until it bottoms Disassembly Simply press on the push button and withdraw the tube Pneumatic.6

Prestolok Fittings dvantages ompact ready-to-use fitting Wide product range covering all applications Full flow capability rass nickel plated body rass is a raw material providing : robustness, excellent shock resistance, good temperature capability, excellent spark resistance. Nickel plating gives improved corrosion resistance and a bright appearance which does not deteriorate. Use with plastic or metal tubing Prestolok is a high performance push-in fittin Designed for use with most types of plastic tubing (polyamide, polyurethane, polyethylene, Pebax, Teflon...), this high performance fitting can also be used with copper tubing* conforming to DIN 786, NF5-20, S 287 Part 2 (tolerance +0.05 mm). For steel, stainless steel tubing or other raw material, please contact your Parker sales engineer. * Tube must be cut square and correctly deburred. Positive hold by a flexible stainless steel grab ring The special shape of the radial teeth of the grab ring prevents longitudinal scratch marks on the tube. The elasticity of the grab ring absorbs vibration and pulsating pressure. twist-free assembly, the tube can rotate freely even under pressure. Ready-to-use fitting The Prestolok range is manufactured with brass nickel plated male threads ready for use : parallel threads are supplied with a preassembled, fully retained O-Ring seal, taper threads are treated with a special Parker Teflon oating (PT) for self sealing on assembly, re-usable up to five times without additional sealing material. How to use Straight male connectors with internal hexagon The internal hexagon allows vertical mounting with the use of an llen key. ecause the internal hexagon does not go completely through the fitting, the fitting cannot slip down the llen key during assembly. The lack of external hexagon gives a significant reduction in the overall dimensions enabling close mounting of these fittings to give very compact installations. Plastic push button Simple manual pressure on the userfriendly push button allows instant disconnection of the tube. Tube sizes are marked on the push button for easy identification. ssembly ut the tube square (and correctly deburred for copper) Insert the tube into the fitting until it bottoms Disassembly Simply press on the push button and withdraw the tube Pneumatic.7

SPP and etric Stud Fittings ale connector - metric straight thread Tube Thread Pack etal Ø Qty Order code 3 3x0,5 0 F8P33 3 5x,0,8 0 F8P35 4 3x,0,5 0 F8P43 4 5x,0,8 0 F8P45 6 5x,0,8 0 F8P65 ale connector - metric straight thread Tube Thread Pack etal Ø Qty Order code 3 3x0,5 0 F28P33 3 5x,0,8 0 F28P35 4 3x,0,5 5 F28P43 4 5x,0,8 0 F28P45 6 5x,0,8 0 F28P65 ale connector - SPP Tube Thread Pack etal Ø Qty Order code 4 /8 0 F4P4-/8 4 /4 0 F4P4-/4 6 /8 0 F4P6-/8 6 /4 0 F4P6-/4 8 /8 0 F4P8-/8 8 /4 0 F4P8-/4 8 3/8 0 F4P8-3/8 0 /4 0 F4P0-/4 0 3/8 0 F4P0-3/8 0 /2 0 F4P0-/2 2 /4 0 F4P2-/4 2 3/8 0 F4P2-3/8 2 /2 0 F4P2-/2 4 3/8 0 F4P4-3/8 4 /2 0 F4P4-/2 Female - metric Tube Thread Pack etal Ø Qty Order code 3 3x0,5 0 G8P33 3 5x0,8 0 G8P35 4 3x0,5 0 G8P43 4 5x0,8 0 G8P45 Female connector - SPP Tube Thread Pack etal Ø Qty Order code 4 /8 0 G4P4-/8 4 /4 0 G4P4-/4 6 /8 0 G4P6-/8 6 /4 0 G4P6-/4 8 /8 0 G4P8-/8 8 /4 0 G4P8-/4 For dimensions see page Prestolok icro page 23 to 30 Prestolok 2 page 3 to 39 Prestolok page 40-47 Pneumatic.8

SPT Stud Fittings ale connector - SPT Tube Thread Pack etal Ø Qty Order code 3 /8 0 F23P3-/8 4 /8 0 F23P4-/8 6 /8 0 F23P6-/8 6 /4 0 F23P6-/4 8 /8 0 F23P8-/8 8 /4 0 F23P8-/4 ale connector - SPT Tube Thread Pack etal Ø Qty Order code 4 /8 0 F3P4-/8 4 /4 0 F3P4-/4 6 /8 0 F3P6-/8 6 /4 0 F3P6-/4 8 /8 0 F3P8-/8 8 /4 0 F3P8-/4 8 3/8 0 F3P8-3/4 0 /4 0 F3P0-/4 0 3/8 0 F3P0-3/8 0 /2 0 F3P0-/2 2 /4 0 F3P2-/4 2 3/8 0 F3P2-3/8 2 /2 0 F3P2-/2 4 3/8 0 F3P4-3/8 4 /2 0 F3P4-/2 For dimensions see page Prestolok icro page 23 to 30 Prestolok 2 page 3 to 39 Prestolok page 40-47 Pneumatic.9

SPP and etric Elbows djustable male elbow - metric straight thread Tube Thread Pack Plastic etal Ø Qty Order code Order code 3 3x0,5 0 68PK33 3 5x0,8 0 68PK35 4 3x0,5 0 68PK43 4 5x0,8 0 68PK45 68P45 6 5x0,8 0 68PK65 68P65 djustable male elbow - SPP Tube Thread Pack Plastic etal Ø Qty Order code Order code 4 /8 0 64PK4-/8 64P4-/8 4 /4 0 64PK4-/4 64P4-/4 6 /8 0 64PK6-/8 64P6-/8 6 /4 0 64PK6-/4 64P6-/4 8 /8 0 64PK8-/8 64P8-/8 8 /4 0 64PK8-/4 64P8-/4 8 3/8 0 64PK8-3/8 64P8-3/8 0 /4 0 64PK0-/4 64P0-/4 0 3/8 0 64PK0-3/8 64P0-3/8 2 /4 0 64PK2-/4 64P2-/4 2 3/8 0 64PK2-3/8 64P2-3/8 4 3/8 0 64PK4-3/8 64P4-3/8 4 /2 0 64PK4-/2 64P4-/2 ompact adjustable male elbow - metric straight thread Tube Thread Pack Plastic etal Ø Qty Order code Order code 4 5x0,8 0 68SPK45 68SP45 ompact adjustable male elbow - SPP Tube Thread Pack Plastic etal Ø Qty Order code Order code 4 /8 0 64SPK4-/8 64SP4-/8 4 /4 0 64SPK4-/4 6 /8 0 64SPK6-/8 64SP6-/8 6 /4 0 64SPK6-/4 64SP6-/4 8 /8 0 64SPK8-/8 64SP8-/8 8 /4 0 64SPK8-/4 64SP8-/4 8 3/8 0 64SPK8-3/8 64SP8-3/8 0 /4 0 64SP0-/4 0 3/8 0 64SP0-3/8 2 /4 0 64SP2-/4 2 3/8 0 64SP2-3/8 2 /2 0 64SP2-/2 djustable extended male elbow - SPP Tube Thread Pack Plastic Ø Qty Order code 4 /8 0 64PK4-/8 4 /4 0 64PK4-/4 6 /8 0 64PK6-/8 6 /4 0 64PK6-/4 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.0

SPT Elbows ompact elbow - SPT Tube Thread Pack etal Ø Qty Order code 4 /8 0 3P4-/8 6 /8 0 3P6-/8 6 /4 0 3P6-/4 8 /8 0 3P8-/8 8 /4 0 3P8-/4 0 /4 0 3P0-/4 0 3/8 0 3P0-3/8 2 3/8 0 3P2-3/8 2 /2 0 3P2-/2 4 3/8 0 3P4-3/8 4 /2 0 3P4-/2 djustable male elbow - SPT ompact adjustable male elbow - SPT djustable extended male elbow - SPT Tube Thread Pack Plastic etal Ø Qty Order code Order code 3 /8 0 63PK3-/8 4 /8 0 63PK4-/8 63P4-/8 4 /4 0 63PK4-/4 63P4-/4 6 /8 0 63PK6-/8 63P6-/8 6 /4 0 63PK6-/4 63P6-/4 8 /8 0 63PK8-/8 63P8-/8 8 /4 0 63PK8-/4 63P8-/4 8 3/8 0 63PK8-3/8 63P8-3/8 0 /4 0 63PK0-/4 63P0-/4 0 3/8 0 63PK0-3/8 63P0-3/8 0 /2 0 63PK0-/2 2 /4 0 63PK2-/4 63P2-/4 2 3/8 0 63PK2-3/8 63P2-3/8 2 /2 0 63PK2-/2 63P2-/2 4 3/8 0 63PK4-3/8 63P4-3/8 4 /2 0 63PK4-/2 63P4-/2 Tube Thread Pack Plastic Ø Qty Order code 4 /8 0 63SPK4-/8 4 /4 0 63SPK4-/4 6 /8 0 63SPK6-/8 6 /4 0 63SPK6-/4 8 /8 0 63SPK8-/8 8 /4 0 63SPK8-/4 8 3/8 0 63SPK8-3/8 0 /4 5 63SPK0-/4 0 3/8 5 63SPK0-3/8 0 /2 5 63SPK0-/2 N Tube Thread Pack Plastic etal Ø Qty Order code Order code 4 /8 0 63PK4-/8 63P4-/8 4 /4 0 63PK4-/4 63P4-/4 6 /8 0 63PK6-/8 63P6-/8 6 /4 0 63PK6-/4 63P6-/4 8 /8 0 63PK8-/8 63P8-/8 8 /4 0 63PK8-/4 63P8-/4 4 P PT Threads are treated with Parker Teflon oating (PT) sealing material For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.

SPP and etric Tee Fittings djustable male run tee - metric straight thread Tube Thread Pack Plastic etal Ø Qty Order code Order code 3 3x0,5 0 R68PK33 3 5x0,8 0 R68PK35 3 3x0,5 0 R68PK43 4 5x0,8 0 R68PK45 R68P45 6 5x0,8 0 R68PK65 R68P65 djustable male run tee - SPP Tube Thread Pack Plastic etal Ø Qty Order code Order code 4 /8 0 R64PK4-/8 R64P4-/8 4 /4 0 R64PK4-/4 R64P4-/4 6 /8 0 R64PK6-/8 R64P6-/8 6 /4 0 R64PK6-/4 R64P6-/4 8 /8 0 R64PK8-/8 R64P8-/8 8 /4 0 R64PK8-/4 R64P8-/4 8 3/8 0 R64PK8-3/8 R64P8-3/8 0 /4 0 R64PK0-/4 R64P0-/4 0 3/8 0 R64PK0-3/8 R64P0-3/8 2 /4 0 R64PK2-/4 R64P2-/4 2 3/8 0 R64PK2-3/8 R64P2-3/8 4 3/8 5 R64PK4-3/8 R64P4-3/8 4 /2 5 R64PK4-/2 R64P4-/2 djustable male branch tee - metric straight thread Tube Thread Pack Plastic etal Ø Qty Order code Order code 3 3x0,5 0 S68PK33 3 5x0,8 0 S68PK35 4 3x0,5 0 S68PK43 4 5x0,8 0 S68PK45 S68P45 6 5x0,8 0 S68PK65 S68P65 djustable male branch tee - SPP Tube Thread Pack Plastic etal Ø Qty Order code Order code For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 4 /8 0 S64PK4-/8 S64P4-/8 4 /4 0 S64PK4-/4 S64P4-/4 6 /8 0 S64PK6-/8 S64P6-/8 6 /4 0 S64PK6-/4 S64P6-/4 8 /8 0 S64PK8-/8 S64P8-/8 8 /4 0 S64PK8-/4 S64P8-/4 8 3/8 0 S64PK8-3/8 S64P8-3/8 0 /4 0 S64PK0-/4 S64P0-/4 0 3/8 0 S64PK0-3/8 S64P0-3/8 2 /4 5 S64PK2-/4 S64P2-/4 2 3/8 0 S64PK2-3/8 S64P2-3/8 4 3/8 5 S64PK4-3/8 S64P4-3/8 4 /2 5 S64PK4-/2 S64P4-/2 Pneumatic.2

SPT Tee Fittings djustable male run tee - SPT Tube Thread Pack Plastic etal Ø Qty Order code Order code 3 /8 0 R63PK3-/8 4 /8 0 R63PK4-/8 R63P4-/8 4 /4 0 R63PK4-/4 R63P4-/4 6 /8 0 R63PK6-/8 R63P6-/8 6 /4 0 R63PK6-/4 R63P6-/4 8 /8 0 R63PK8-/8 R63P8-/8 8 /4 0 R63PK8-/4 R63P8-/4 8 3/8 0 R63PK8-3/8 R63P8-3/8 0 /4 0 R63PK0-/4 R63P0-/4 0 3/8 0 R63PK0-3/8 R63P0-3/8 2 /4 0 R63PK2-/4 R63P2-/4 2 3/8 0 R63PK2-3/8 R63P2-3/8 2 /2 5 R63PK2-/2 R63P2-/2 4 3/8 5 R63PK4-3/8 R63P4-3/8 4 /2 5 R63PK4-/2 R63P4-/2 djustable male branch tee - SPT Tube Thread Pack Plastic etal Ø Qty Order code Order code 3 /8 0 S63PK3-/8 4 /8 0 S63PK4-/8 S63P4-/8 4 /4 0 S63PK4-/4 S63P4-/4 6 /8 0 S63PK6-/8 S63P6-/8 6 /4 0 S63PK6-/4 S63P6-/4 8 /8 0 S63PK8-/8 S63P8-/8 8 /4 0 S63PK8-/4 S63P8-/4 8 3/8 0 S63PK8-3/8 S63P8-3/8 0 /4 0 S63PK0-/4 S63P0-/4 0 3/8 0 S63PK0-3/8 S63P0-3/8 2 /4 0 S63PK2-/4 S63P2-/4 2 3/8 0 S63PK2-3/8 S63P2-3/8 2 /2 5 S63PK2-/2 S63P2-/2 4 3/8 5 S63PK4-3/8 S63P4-3/8 4 /2 5 S63PK4-/2 S63P4-/2 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.3

SPP and etric Y and ultiple Fittings djustable male Y connector - metric straight thread Tube Thread Pack Plastic Ø Qty Order code 3 3x0,5 0 YJ68PK33 4 5x0,8 0 YJ68PK45 6 5x0,8 0 YJ68PK65 djustable male Y connector - SPP Tube Thread Pack Plastic Ø Qty Order code 4 /8 0 YJ64PK4-/8 4 /4 0 YJ64PK4-/4 6 /8 0 YJ64PK6-/8 6 /4 0 YJ64PK6-/4 8 /8 0 YJ64PK8-/8 8 /4 0 YJ64PK8-/4 djustable double male Y connector - SPP Tube Thread Pack Plastic Ø Qty Order code 4 /8 0 YJ564PK4-/8 4 /4 0 YJ564PK4-/4 djustable male multiple tee - SPP Tube Tube Thread Pack Plastic Ø Ø2 Qty Order code 2 2 2 2 6 4 /8 5 J664PK6-4-/8 6 4 /4 5 J664PK6-4-/4 8 4 /8 5 J664PK8-4-/8 8 4 /4 5 J664PK8-4-/4 8 4 3/8 5 J664PK8-4-3/8 8 6 /8 5 J664PK8-6-/8 8 6 /4 5 J664PK8-6-/4 8 6 3/8 5 J664PK8-6-3/8 0 6 /4 5 J664PK0-6-/4 0 6 3/8 5 J664PK0-6-3/8 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.4

SPT Y and ultiple Fittings djustable male Y connector - SPT Tube Thread Pack Plastic Ø Qty Order code 3 /8 0 YJ63PK3-/8 4 /8 0 YJ63PK4-/8 6 /8 0 YJ63PK6-/8 4 /4 0 YJ63PK4-/4 6 /4 0 YJ63PK6-/4 8 /8 0 YJ63PK8-/8 8 /4 0 YJ63PK8-/4 djustable double male Y connector - SPT Tube Thread Pack Plastic Ø Qty Order code 4 /8 5 YJ563PK4-/8 4 /4 5 YJ563PK4-/4 djustable male multiple tee - SPT Tube Tube Thread Pack Plastic Ø Ø2 Qty Order code 2 2 2 2 6 4 /8 5 J663PK6-4-/8 6 4 /4 5 J663PK6-4-/4 8 4 /8 5 J663PK8-4-/8 8 4 /4 5 J663PK8-4-/4 8 4 3/8 5 J663PK8-4-3/8 8 6 /8 5 J663PK8-6-/8 8 6 /4 5 J663PK8-6-/4 8 6 3/8 5 J663PK8-6-3/8 0 6 /4 5 J663PK0-6-/4 0 6 3/8 5 J663PK0-6-3/8 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.5

Tube to Tube Fittings Equal union Ø Pack Plastic etal Qty Order code Order code 3 0 HPK3-4 0 HPK4 HP4 6 0 HPK6 HP6 8 0 HPK8 HP8 0 0 HPK0 HP0 2 0 HPK2 HP2 4 0 HPK4 HP4 Unequal union 2 Tube Tube Pack Plastic Ø Ø2 Qty Order code 4 3 0 HPK4-3 6 4 0 HPK6-4 8 4 0 HPK8-4 8 6 0 HPK8-6 0 6 0 HPK0-6 0 8 0 HPK0-8 2 0 0 HPK2-0 Equal union elbow Tube Pack Plastic etal Ø Qty Order code Order code 3 0 EPK3 4 0 EPK4 EP4 6 0 EPK6 EP6 8 0 EPK8 EP8 0 0 EPK0 EP0 2 0 EPK2 EP2 4 0 EPK4 EP4 Equal union tee Tube Pack Plastic etal Ø Qty Order code Order code 3 0 JPK3 4 0 JPK4 JP4 6 0 JPK6 JP6 8 0 JPK8 JP8 0 0 JPK0 JP0 2 0 JPK2 JP2 4 5 JPK4 JP4 Unequal union tee 2 Tube Tube Pack Plastic Ø Ø2 Qty Order code 6 4 0 JPK6-6-4 8 6 0 JPK8-8-6 0 8 0 JPK0-0-8 2 0 0 JPK2-2-0 4 6 0 JPK4-4-6 6 8 0 JPK6-6-8 8 0 0 JPK8-8-0 0 2 0 JPK0-0-2 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.6

Tube to Tube Fittings Equal union Y connector Tube Pack Plastic Ø Qty Order code 3 0 YJPK3 4 0 YJPK4 6 0 YJPK6 8 0 YJPK8 0 0 YJPK0 Unequal union Y connector 2 Tube Tube Pack Plastic Ø Ø2 Qty Order code 4 3 0 YJPK4-3 6 3 0 YJPK6-3 6 4 0 YJPK6-4 6 8 0 YJPK6-6-8 8 0 0 YJPK8-8-0 Union double Y connector 2 2 Tube Tube Pack Plastic Ø Ø2 Qty Order code 4 4 0 YJ5PK4 6 4 0 YJ5PK6-4 ultiple tee - 5 connections Tube Tube Pack Plastic Ø Ø2 Qty Order code 6 4 5 J5PK6-4 8 4 5 J5PK8-4 8 6 5 J5PK8-6 0 6 5 J5PK0-6 2 2 2 ultiple tee - 6 connections 2 2 2 2 Tube Tube Pack Plastic Ø Ø2 Qty Order code 6 4 5 J6PK6-4 8 4 5 J6PK8-4 8 6 5 J6PK8-6 0 6 5 J6PK0-6 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.7

Plug in Fittings Tube end expander Tube Tube Pack Plastic etal Ø Ø2 Qty Order code Order code 2 4 6 0 TE2PK4-6 TEP4-6 Tube end reducer 2 Tube Tube Pack Plastic etal Ø Ø2 Qty Order code Order code 4 3 0 TR2PK4-3 6 4 0 TR2PK6-4 TRP6-4 8 4 0 TR2PK8-4 TRP8-4 8 6 0 TR2PK8-6 TRP8-6 0 4 0 TR2PK0-4 TRP0-4 0 6 0 TR2PK0-6 TRP0-6 0 8 0 TR2PK0-8 TRP0-8 2 6 0 TR2PK2-6 TRP2-6 2 8 0 TR2PK2-8 TRP2-8 2 0 0 TR2PK2-0 TRP2-0 4 8 0 TR2PK4-8 TRP4-8 4 0 0 TR2PK4-0 TRP4-0 4 2 0 TR2PK4-2 TRP4-2 Plug Tube Pack Plastic etal Ø Qty Order code Order code 3 0 FNPK3 4 0 FNPK4 FNP4 6 0 FNPK6 FNP6 8 0 FNPK8 FNP8 0 0 FNPK0 FNP0 2 0 FNPK2 FNP2 4 0 FNPK4 FNP4 Double male union Tube Pack Plastic Ø Qty Order code 4 0 PK4 6 0 PK6 8 0 PK8 0 0 PK0 2 0 PK2 4 0 PK4 Pressure indicator Tube Pack Plastic Ø Qty Order code 4 0 TS2PK4 6 0 TS2PK6 8 0 TS2PK8 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.8

Plug in Fittings ompact plug-in elbow Plug-in run tee 2 Tube Tube Pack Plastic Ø Ø2 Qty Order code 3 3 0 T2ESPK3 3 4 0 T2ESPK3-4 4 4 0 T2ESPK4 6 6 0 T2ESPK6 4 6 0 T2ESPK4-6 8 8 0 T2ESPK8 2 Tube Tube Pack Plastic Ø Ø2 Qty Order code 4 4 0 T2JJPK4 6 6 0 T2JJPK6 8 8 0 T2JJPK8 Plug in branch tee Tube Tube Pack Plastic Ø Ø2 Qty Order code 4 4 0 T2JPK4 6 6 0 T2JPK6 8 8 0 T2JPK8 2 Equal plug in Y connector Tube Pack Plastic Ø Qty Order code 3 0 YJ2PK3 4 0 YJ2PK4 6 0 YJ2PK6 8 0 YJ2PK8 Unequal plug in Y connector 2 Tube Tube Pack Plastic Ø Ø2 Qty Order code 4 3 0 YJ2PK4-3 6 4 0 YJ2PK6-4 Plug in double Y connector 2 2 Tube Tube Pack Plastic Ø Ø2 Qty Order code 6 4 5 YJ52PK6-4 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.9

ulkhead and anifold Fittings ulkhead equal union Tube Pack Plastic etal Ø Qty Order code Order code 3 0 WP3 4 0 WP4 WP4 6 0 WP6 WP6 8 0 WP8 0 0 WP0 2 0 WP2 4 0 WP4 90 adjustable bulkhead union elbow Tube Pack Plastic etal Ø Qty Order code Order code W 4 0 WE6PK4 WE6P4 6 0 WE6PK6 WE6P6 8 0 WE6PK8 WE6P8 0 0 WE6PK0 WE6P0 2 0 WE6PK2 WE6P2 4 djustable male bulkhead Y connector Tube Pack Plastic Ø Qty Order code 4 0 WYJ6PK4 6 0 WYJ6PK6 8 0 WYJ6PK8 anifold for 2 tubes and pressure indicator Tube Pack Plastic Ø Qty Order code 4 0 HS3PK4 6 0 HS3PK6 8 0 HS3PK8 anifold for 3 tubes Tube Pack Plastic Ø Qty Order code 4 0 J3PK4 6 0 J3PK6 8 0 J3PK8 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.20

anjo's Single banjo - assembled Tube Thread Pack Plastic etal Ø Qty Order code Order code 3 3x0,5 0 OR8P33 3 5x0,8 0 OR8P35 4 5x0,8 0 OR8P45 4 /8 0 OR4P4-/8 6 /8 0 OR4P6-/8 6 /4 0 OR4P6-/4 8 /8 0 OR4P8-/8 8 /4 0 OR4P8-/4 0 3/8 0 OR4P0-3/8 Double banjo - assembled Tube Thread Pack etal Ø Qty Order code 4 5x0,8 0 OR8P4D5 4 /8 0 OR4P4D/8 6 /8 0 OR4P6D/8 6 /4 0 OR4P6D/4 8 /8 0 OR4P8D/8 anjo components (all Prestolok) Tube Thread Single ody Double ody Single olt Stacking olt Ø Order code Order code Order code Order code 4 5x0,8 ORP4-5 ORP4D5 S8U5-4 S8UD5-4 4 /8 ORP4-0 ORP4D0 S4U/8-4 S4UD/8-4 6 /8 ORP6-0 ORP6D0 S4U/8-4 S4UD/8-4 6 /4 ORP6-3 ORP6D3 S4U/4-6 S4UD/4-6 8 /8 ORP8-0 ORP8D0 S4U/8-4 S4UD/8-4 8 /4 ORP8-3 S4U/4-6 S4UD/4-6 0 3/8 ORP0-7 S4U3/8-0 S4UD3/8-0 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.2

Protective aps Protective cap Tube olour Pack Plastic Ø Qty Order code 4 White 0 4W 4 lue 0 4U 4 Green 0 4G 4 Red 0 4R 4 Yellow 0 4Y 4 lack 0 4 6 White 0 6W 6 lue 0 6U 6 Green 0 6G 6 Red 0 6R 6 Yellow 0 6Y 6 lack 0 6 8 White 0 8W 8 lue 0 8U 8 Green 0 8G 8 Red 0 8R 8 Yellow 0 8Y 8 lack 0 8 0 White 0 0W 0 lue 0 0U 0 Green 0 0G 0 Red 0 0R 0 Yellow 0 0Y 0 lack 0 0 2 White 0 2W 2 lue 0 2U 2 Green 0 2G 2 Red 0 2R 2 lack 0 2 4 White 0 4W 4 lue 0 4U 4 Green 0 4G 4 Red 0 4R 4 Yellow 0 4Y 4 lack 0 4 For dimensions see page Prestolok icro (Plastic) page 23 to 30 Prestolok 2 (Plastic) page 3 to 39 Prestolok (etal) page 40-47 Pneumatic.22

Prestolok icro - Dimensions ale - metric straight thread N J Part number E J N Weight E 3 3x0.5 F8P33 7 6.5 3.25.45 5 3 5x0.8 F8P35 7 6.5 3.50.20 5 4 3x0.5 F8P43 8 7.9 3.25.95 5 4 5x0.8 F8P45 8 7.9 3.50.80 7 6 5x0.8 F8P65 0.5 3.50 4.80 7 ale connector - metric straight thread E N J Part number E J N *Int. H Weight 3 3x0.5 F28P33 7.0 3.25 3.65.5 5 3 5x0.8 F28P35 6.5 3.50 9.80 2.0 5 4 3x0.5 F28P43 7.9 3.25 4.5.5 6 4 5x0.8 F28P45 7.9 3.50.70 2.0 6 6 5x0.8 F28P65 0.5 3.50 4.80 2.0 7 *This fitting has been designed for use where space is at a premium. It is assembled using the internal hexagon and an llen key. ale connector - SPP N J Part number E J N Weight E 4 G /8 F4P4-/8 3 7.9 5.0 7.9 8 4 G /4 F4P4-/4 6 7.9 5.5 7.9 2 6 G /8 F4P6-/8 3 0.5 5.0 2.3 0 6 G /4 F4P6-/4 6 0.5 5.5 8.8 4 Female - metric E J Part number E J Weight 3 3x0.5 G8P33 7 6.5 4.25 4.05 5 3 5x0.8 G8P35 7 6.5 6.60 7.90 5 4 3x0.5 G8P43 8 7.9 4.25 4.55 5 4 5x0.8 G8P45 8 7.9 6.60 8.40 5 Female - SPP E J Part number E J Weight 4 Rp /8 G4P4-/8 3 7.9 8 9.9 9 4 Rp /4 G4P4-/4 6 7.9 0 2.9 5 6 Rp /8 G4P6-/8 3 0.5 8 22.8 0 6 Rp /4 G4P6-/4 6 0.5 0 24.8 5 Pneumatic.23

Prestolok icro - Dimensions ale connector - SPT E PT R P internal hex Part number E P R Int. H Weight 3 R /8 F23P3-/8 6.5 6.5 0.2 2.0 4 4 R /8 F23P4-/8 7.9 6.5.4 2.5 5 6 R /8 F23P6-/8 0.5 6.5 4. 3.0 7 This fitting has been designed for use where space is at a premium. It is assembled using the internal hexagon and an llen key. Threads are treated with Parker Teflon oating (PT) sealing material. ale connector - SPT E R PT Part number P R Weight 4 R /8 F3P4-/8 0 6.5.4 7 4 R /4 F3P4-/4 4 0.0 3.4 6 R /8 F3P6-/8 6.5 4.8 0 6 R /4 F3P6-/4 4 0.0 3.8 6 P Threads are treated with Parker Teflon oating (PT) sealing material. djustable male elbow - metric straight thread E N J Part number E J N Weight 3 3x0.5 68PK33 7 7.3 3.25.25 9.2 6 3 5x0.8 68PK35 7 7.3 3.50.25 9.2 6 4 3x0.5 68PK43 8 8.5 3.25 2.65 9.8 6 4 5x0.8 68PK45 8 8.5 3.50 2.65 9.8 6 6 5x0.8 68PK65.5 3.50 6.70.7 7 djustable extended male elbow - metric straight thread Part number E J N Weight E N 3 3x0.5 68PK33 6 7.3 3.25.25 7.0 7 3 5x0.8 68PK35 8 7.3 3.50.25 7.0 8 4 3x0.5 68PK43 8 8.5 3.25 2.65 8.8 8 4 5x0.8 68PK45 8 8.5 3.50 2.65 8.8 8 6 5x0.8 68PK65 0.5 3.50 6.70 23.7 9 J Pneumatic.24

djustable extended male elbow - SPP Prestolok icro - Dimensions E N Part number E J N Weight 4 G /8 64PK4-/8 3 8.5 5.0 2.65 7.2 0 4 G /4 64PK4-/4 6 8.5 5.5 2.65 7.2 3 6 G /8 64PK6-/8 3.5 5.0 6.70 23.7 2 6 G /4 64PK6-/4 6.5 5.5 6.70 2.7 2 J djustable male elbow - SPT E P R Part number E P R Weight 3 R /8 63PK3-/8 0 7.3.25 6.5.6 6 4 R /8 63PK4-/8 0 8.5 2.65 6.5 2.2 6 4 R /4 63PK4-/4 4 8.5 2.65 0.0 4.2 6 6 R /8 63PK6-/8.5 6.70 6.5 3.7 7 6 R /4 63PK6-/4 4.5 6.70 0.0 5.7 7 PT Threads are treated with Parker Teflon oating (PT) sealing material. djustable male run tee - metric straight thread N J Part number E J N Weight 3 3x0.5 R68PK33 7 7.3 3.25.25 9.2 6 3 5x0.8 R68PK35 7 7.3 3.50.25 9.2 6 4 3x0.5 R68PK43 8 8.5 3.25 2.65 9.8 7 4 5x0.8 R68PK45 8 8.5 3.50 2.65 9.8 7 6 5x0.8 R68PK65.5 3.50 6.70.7 8 E djustable male run tee - SPP N J Part number E J N Weight 4 G /8 R64PK4-/8 3 8.5 5.0 2.65 8.2 7 4 G /4 R64PK4-/4 6 8.5 5.5 2.65 8.2 7 6 G /8 R64PK6-/8 3.5 5.0 6.70.7 8 6 G /4 R64PK6-/4 6.5 5.5 6.70 9.7 9 E Pneumatic.25

Prestolok icro - Dimensions djustable male branch tee - metric straight thread E N J Part number E J N Weight 3 3x0.5 S68PK33 7 7.3 3.25.25 9.2 6 3 5x0.8 S68PK35 7 7.3 3.50.25 9.2 6 4 3x0.5 S68PK43 8 8.5 3.25 2.65 9.8 7 4 5x0.8 S68PK45 8 8.5 3.50 2.65 9.8 7 6 5x0.8 S68PK65.5 3.50 6.70.7 8 djustable male branch tee - SPP Part number E J N Weight E N 4 G /8 S64PK4-/8 3 8.5 5.0 2.65 8.2 7 4 G /4 S64PK4-/4 6 8.5 5.5 2.65 8.2 7 6 G /8 S64PK6-/8 3.5 5.0 6.70.7 8 6 G /4 S64PK6-/4 6.5 5.5 6.70 9.7 9 J djustable male run tee - SPT R P PT Part number E P R Weight 3 R /8 R63PK3-/8 0 7.3.25 6.5.6 7 4 R /8 R63PK4-/8 0 8.5 2.65 6.5 2.2 7 4 R /4 R63PK4-/4 4 8.5 2.65 0.0 4.2 7 6 R /8 R63PK6-/8.5 6.70 6.5 3.7 8 6 R /4 R63PK6-/4 4.5 6.70 0.0 5.7 8 E Threads are treated with Parker Teflon oating (PT) sealing material. djustable male branch tee - SPT E P R Part number E P R Weight 3 R /8 S63PK3-/8 0 7.3.25 6.5.6 7 4 R /8 S63PK4-/8 0 8.5 2.65 6.5 2.2 7 4 R /4 S63PK4-/4 4 8.5 2.65 0.0 4.2 7 6 R /8 S63PK6-/8.5 6.70 6.5 3.7 8 6 R /4 S63PK6-/4 4.5 6.70 0.0 5.7 8 PT Threads are treated with Parker Teflon oating (PT) sealing material. Pneumatic.26

djustable male Y connector - metric straight thread Prestolok icro - Dimensions 2 N J Part number J 2 N Weight 3 3x0.5 YJ68PK33 8 3.25 4.0 6.7 24.2 7 4 5x0.8 YJ68PK45 9 3.50 6.6 8. 26.2 7 6 5x0.8 YJ68PK65 2 3.50 22.3 0.8 34. 8 djustable male Y connector - SPT Part number 2 P R Weight 2 R PT 3 R /8 YJ63PK3-/8 0 4.0 6.7 6.5 27.2 7 4 R /8 YJ63PK4-/8 0 6.6 8. 6.5 29.4 7 6 R /8 YJ63PK6-/8 22.3 0.8 6.5 36.4 9 P Threads are treated with Parker Teflon oating (PT) sealing material. Equal union E 2 2 Part number E Weight 3 3 HPK3 7.3 9.8 2 4 4 HPK4 8.5 2.8 3 6 6 HPK6.5 27.8 3 Unequal union 2 Part number E Weight 4 3 HPK4-3 8.5 2.2 2 6 4 HPK6-4.5 27.8 3 E 2 Equal elbow Part number E Weight 3 EPK3 7.3.25 2 4 EPK4 8.5 2.65 3 6 EPK6.5 6.70 3 E Pneumatic.27

Prestolok icro - Dimensions Equal tee Part number E Weight 3 JPK3 7.3 22.5.25 3 4 JPK4 8.5 25.3 2.65 3 6 JPK6.5 33.4 6.70 4 E Equal Y union 2 2 2 Part number 2 Weight 3 3 YJPK3 22.0 3.9 6.7 3 4 4 YJPK4 24.8 6.4 8. 4 6 6 YJPK6 3.8 22.2 0.8 5 Unequal Y union 2 2 2 Part number 2 Weight 4 3 YJPK4-3 24.2 6.4 8. 3 6 3 YJPK6-3 3.2 22.2 0.8 4 6 4 YJPK6-4 3.8 22.2 0.8 4 Tube end expander 2 Part number Weight 6 4 TE2PK4-6 3.7 2 2 Tube end reducer 2 Part number Weight 3 4 TR2PK4-3 26.4 2 2 Pneumatic.28

Prestolok icro - Dimensions Plug Part number Weight 3 FNPK3 22 ompact plug-in elbow 2 Part number E H Weight E H 3 3 T2ESPK3 7.3 6.25 2 3 4 T2ESPK3-4 7.3 6.25 2 4 4 T2ESPK4 8.5 6 2.65 2 4 6 T2ESPK4-6 8.5 7 2.65 2 6 6 T2ESPK6.5 7 6.70 3 2 Equal plug-in Y union H 2 2 2 Part number H 2 Weight 3 3 YJ2PK3 6 35.7 3.9 6.7 3 4 4 YJ2PK4 6 37.9 6.4 8. 3 6 6 YJ2PK6 7 45.9 22.2 0.8 3 Unequal plug-in Y union H 2 Part number H 2 Weight 4 3 YJ2PK4-3 6 37.9 6.4 8. 3 6 4 YJ2PK6-4 6 44.9 22.2 0.8 4 2 2 Pneumatic.29

Prestolok icro - Dimensions ulkhead equal union W Part number W maxi. Weight 3 8x WP3 2 20.5 5 0 4 0x WP4 4 2.5 5 6 2x WP6 6 26.00 8 3 anjo - metric straight thread E J K 4 T N Part number 4 E J K N T Weight 3 3x0.5 OR8P33 6 6.5 3.25 0.5 2.5 0 4 5 3 5x0.8 OR8P35 8 6.5 4.50 0.5 3.5 0 4 5 Pneumatic.30

Prestolok 2 - Dimensions djustable male elbow - SPP 3 Part number 4 J N O Width Weight dia. Q O ø 3xQ 4 J N 8 4.2 /8 64PK8-/8 4 6 22.5 29.0 7 9.0 22 8 4.2 /4 64PK8-/4 9 9 22.5 34.0 7 9.0 35 8 4.2 3/8 64PK8-3/8 22 9 22.5 35.0 7 9.0 49 0 4.2 /4 64PK0-/4 9 9 28.5 39.0 2 23.5 45 0 4.2 3/8 64PK0-3/8 22 9 28.5 40.0 2 23.5 60 2 4.2 /4 64PK2-/4 9 9 30.0 40.5 23 25.5 56 2 4.2 3/8 64PK2-3/8 22 9 30.0 4.5 23 25.5 60 4 4.2 3/8 64PK4-3/8 22 9 33.5 45.0 25 27.5 74 4 4.2 /2 64PK4-/2 27 2 33.5 49.5 25 27.5 03 ompact adjustable male elbow - metric straight thread Part number 4 H J O Weight O H 4 5x0.8 68SPK45 0 5.5 5 20.5 3 6 4 J Our fittings are supplied without cap. ap must be ordered separately djustable male elbow - SPT O ø 3xQ 4 PT Threads are treated with Parker Teflon oating (PT) sealing material P N 3 Part number 4 N O P Width Weight dia. Q 8 4.2 /8 63PK8-/8 4 22.5 29.5 7 7.5 9.0 20 8 4.2 /4 63PK8-/4 4 22.5 32.5 7.0 9.0 27 8 4.2 3/8 63PK8-3/8 7 22.5 34.0 7.5 9.0 38 0 4.2 /4 63PK0-/4 7 28.5 40.0 2.0 23.5 37 0 4.2 3/8 63PK0-3/8 7 28.5 39.0 2.5 23.5 43 0 4.2 /2 63PK0-/2 22 28.5 42.0 2 5.0 23.5 63 2 4.2 /4 63PK2-/4 9 30.0 4.5 23.0 25.5 55 2 4.2 3/8 63PK2-3/8 9 30.0 4.0 23.5 25.5 59 2 4.2 /2 63PK2-/2 22 30.0 44.5 23 5.0 25.5 68 4 4.2 3/8 63PK4-3/8 22 33.5 45.5 25.5 27.5 68 4 4.2 /2 63PK4-/2 22 33.5 48.0 25 5.0 27.5 78 djustable extended male elbow - SPT 3 Part number 4 N O P Width Weight dia. Q O ø 3xQ N 4 3.2 /8 63PK4-/8 0 8.0 4.0 3 7.5 5 22 4 3.2 /4 63PK4-/4 4 8.0 45.0 3.0 5 46 6 4.2 /8 63PK6-/8 20.5 45.0 5 7.5 7 28 6 4.2 /4 63PK6-/4 4 20.5 49.0 5.0 7 48 8 4.2 /8 63PK8-/8 4 22.5 49.5 7 7.5 9 46 8 4.2 /4 63PK8-/4 4 22.5 52.0 7.0 9 5 4 PT P Threads are treated with Parker Teflon oating (PT) sealing material Pneumatic.3

Prestolok 2 - Dimensions ompact adjustable male elbow - SPT O H 4 PT Threads are treated with Parker Teflon oating (PT) sealing material P Part number 4 H O P Weight 4 /8 63SPK4-/8 0 4.5 20.5 3 6.5 9 4 /4 63SPK4-/4 4 4.5 20.5 3 0.0 8 6 /8 63SPK6-/8 6.5 23.0 5 6.5 4 6 /4 63SPK6-/4 4 6.0 23.0 5 0.0 2 8 /8 63SPK8-/8 4 9.5 25.0 7 6.5 5 8 /4 63SPK8-/4 4 8.5 25.0 7 0.0 25 8 3/8 63SPK8-3/8 7 8.5 25.0 7 0.0 28 0 /4 63SPK0-/4 7 23.0 3.0 2 0.0 30 0 3/8 63SPK0-3/8 7 22.5 3.0 2 0.0 36 0 /2 63SPK0-/2 22 24.0 3.0 2 2.5 45 djustable male run tee - SPP O N J 4 ø 3xQ 3 Part number 4 J N O Width Weight dia. Q 8 4.2 /8 R64PK8-/8 4 6 22.5 29.0 7 9.0 26 8 4.2 /4 R64PK8-/4 9 9 22.5 34.0 7 9.0 38 8 4.2 3/8 R64PK8-3/8 22 9 22.5 35.0 7 9.0 53 0 4.2 /4 R64PK0-/4 9 9 28.5 39.0 2 23.5 52 0 4.2 3/8 R64PK0-3/8 22 9 28.5 40.0 2 23.5 68 2 4.2 /4 R64PK2-/4 9 9 30.0 40.5 23 25.5 66 2 4.2 3/8 R64PK2-3/8 22 9 30.0 4.5 23 25.5 70 4 4.2 3/8 R64PK4-3/8 22 9 33.5 45.0 25 27.5 88 4 4.2 /2 R64PK4-/2 27 2 33.5 49.5 25 27.5 7 djustable male branch tee - SPP 3 Part number 4 J N O Width Weight dia. Q N J ø 3xQ 4 O 8 4.2 /8 S64PK8-/8 4 6 22.5 29.0 7 9.0 26 8 4.2 /4 S64PK8-/4 9 9 22.5 34.0 7 9.0 38 8 4.2 3/8 S64PK8-3/8 22 9 22.5 35.0 7 9.0 53 0 4.2 /4 S64PK0-/4 9 9 28.5 39.0 2 23.5 52 0 4.2 3/8 S64PK0-3/8 22 9 28.5 40.0 2 23.5 68 2 4.2 /4 S64PK2-/4 9 9 30.0 40.5 23 25.5 66 2 4.2 3/8 S64PK2-3/8 22 9 30.0 4.5 23 25.5 70 4 4.2 3/8 S64PK4-3/8 22 9 33.5 45.0 25 27.5 88 4 4.2 /2 S64PK4-/2 27 2 33.5 49.5 25 27.5 7 djustable male run tee - SPT O N P 4 ø 3xQ Threads are treated with Parker Teflon oating (PT) sealing material PT 3 Part number 4 N O P Width Weight dia. Q 8 4.2 /8 R63PK8-/8 4 22.5 29.5 7 7.5 9.0 24 8 4.2 /4 R63PK8-/4 4 22.5 32.5 7.0 9.0 3 8 4.2 3/8 R63PK8-3/8 7 22.5 34.0 7.5 9.0 42 0 4.2 /4 R63PK0-/4 7 28.5 40.0 2.0 23.5 44 0 4.2 3/8 R63PK0-3/8 7 28.5 39.0 2.5 23.5 5 2 4.2 /4 R63PK2-/4 9 30.0 4.5 23.0 25.5 65 2 4.2 3/8 R63PK2-3/8 9 30.0 4.0 23.5 25.5 69 2 4.2 /2 R63PK2-/2 22 30.0 44.5 23 5.0 25.5 78 4 4.2 3/8 R63PK4-3/8 22 33.5 45.5 25.5 27.5 82 4 4.2 /2 R63PK4-/2 22 33.5 48.0 25 5.0 27.5 92 Pneumatic.32

Prestolok 2 - Dimensions djustable male branch tee - SPT 3 Part number 4 N O P Width Weight dia. Q O ø 3xQ 4 PT Threads are treated with Parker Teflon oating (PT) sealing material P N 8 4.2 /8 S63PK8-/8 4 22.5 29.5 7 7.5 9.0 24 8 4.2 /4 S63PK8-/4 4 22.5 32.5 7.0 9.0 3 8 4.2 3/8 S63PK8-3/8 7 22.5 34.0 7.5 9.0 42 0 4.2 /4 S63PK0-/4 7 28.5 40.0 2.0 23.5 44 0 4.2 3/8 S63PK0-3/8 7 28.5 39.0 2.5 23.5 5 2 4.2 /4 S63PK2-/4 9 30.0 4.5 23.0 25.5 65 2 4.2 3/8 S63PK2-3/8 9 30.0 4.0 23.5 25.5 69 2 4.2 /2 S63PK2-/2 22 30.0 44.5 23 5.0 25.5 78 4 4.2 3/8 S63PK4-3/8 22 33.5 45.5 25.5 27.5 82 4 4.2 /2 S63PK4-/2 22 33.5 48.0 25 5.0 27.5 92 djustable male Y connector - SPP U J 4 Ø3xQ 2 3 Part number 4 J 2 Width U Weight dia Q 4 /8 3.2 YJ64PK4-/8 4 6 38.5 22.0 5 4.4 22 4 /4 3.2 YJ64PK4-/4 9 9 43.5 22.0 5 4.4 37 6 /8 4.2 YJ64PK6-/8 4 6 46.5 30 3.5 7 7.0 26 6 /4 4.2 YJ64PK6-/4 9 9 5.5 30 3.5 7 7.0 37 8 /8 4.2 YJ64PK8-/8 4 6 46.5 30 3.5 9 8.4 36 8 /4 4.2 YJ64PK8-/4 9 9 5.5 30 3.5 9 8.4 48 Union double Y connector adjustable male - SPP U J 2 3 Part number 4 J 2 Width U Weight dia. Q 4 /8 3.2 YJ564PK4-/8 4 6 42.5 22.5 9.5 24.5 4.4 27 4 /4 3.2 YJ564PK4-/4 9 9 47.5 22.5 9.5 24.5 4.4 43 4 Ø3xQ djustable male multiple tee - SPP H 2 2 2 2 N N N J ø 3xQ 4 2 3 Part number 4 H J N Width Weight dia. Q 6 4 4.4 /8 J664PK6-4-/8 0 27 7.5 03.0 70 8 5 35 6 4 4.4 /4 J664PK6-4-/4 4 27.0 08.0 70 8 5 46 8 4 4.4 /8 J664PK8-4-/8 4 28.0 08.0 70 8 7 53 8 4 4.4 3/8 J664PK8-4-/4 7 28.5 09.0 70 8 7 68 8 4 4.4 3/8 J664PK8-4-3/8 7 28.5 09.0 70 8 7 68 8 6 4.4 /8 J664PK8-6-/8 0 30 7.5 03.0 70 8 7 42 8 6 4.4 /4 J664PK8-6-/4 4 30.0 08.0 70 8 7 54 8 6 4.4 3/8 J664PK8-6-3/8 7 30.5 09.0 70 8 7 67 0 6 4.4 /4 J664PK0-6-/4 4 33.0 7.9 70 8 2 69 0 6 4.4 3/8 J664PK0-6-3/8 7 33.5 8.9 70 8 2 84 Pneumatic.33

Prestolok 2 - Dimensions djustable male Y connector - SPT U PT P 4 Ø3xQ 2 3 Part number 4 2 P Width U Weight dia. Q 4 /4 3.2 YJ63PK4-/4 4 42.0 22.0.0 5 4.4 26 6 /4 4.2 YJ63PK6-/4 4 50.0 30 3.5.0 7 7.0 3 8 /8 4.2 YJ63PK8-/8 4 47.0 30 3.5 7.5 9 8.4 34 8 /4 4.2 YJ63PK8-/4 4 50.0 30 3.5.0 9 8.4 4 Threads are treated with Parker Teflon oating (PT) sealing material Union double Y connector adjustable male - SPT U P 2 3 Part number 4 2 P Width U Weight dia. Q 4 3.2 /8 YJ563PK4-/8 0 42.5 22.5 9.5 7.5 24.5 4.4 24 4 3.2 /4 YJ563PK4-/4 4 46.0 22.5 9.5.0 24.5 4.4 33 PT 4 Ø3xQ Threads are treated with Parker Teflon oating (PT) sealing material djustable male multiple tee - SPT 2 3 Part number 4 H N P Width Weight H 4 P Ø3xQ PT dia. Q 6 4 4.4 /8 J663PK6-4-/8 0 27 03.0 70 8 7.5 5 3 6 4 4.4 /4 J663PK6-4-/4 4 27 06.5 70 8.0 5 40 8 4 4.4 /8 J663PK8-4-/8 0 28 03.0 70 8 7.5 7 39 8 4 4.4 /4 J663PK8-4-/4 4 28 06.5 70 8.0 7 45 8 4 4.4 3/8 J663PK8-4-3/8 7 28 08.0 70 8.5 7 57 2 2 2 2 N N N Threads are treated with Parker Teflon oating (PT) sealing material 8 6 4.4 /8 J663PK8-6-/8 0 30 03.0 70 8 7.5 7 40 8 6 4.4 /4 J663PK8-6-/4 4 30 06.5 70 8.0 7 46 8 6 4.4 3/8 J663PK8-6-3/8 7 30 08.0 70 8.5 7 58 0 6 4.4 /4 J663PK0-6-/4 4 33 6.4 70 8.0 2 60 0 6 4.4 3/8 J663PK0-6-3/8 7 33 7.9 70 8.5 2 67 Equal union Part number O Weight O 8 HPK8 39.0 7 0 0 HPK0 48.0 2 5 2 HPK2 49.0 23 2 4 HPK4 54.0 25 30 Pneumatic.34

Prestolok 2 - Dimensions Unequal union 2 Part number O Weight 2 O 8 4 HPK8-4 38.0 7 4 8 6 HPK8-6 39.0 7 2 0 6 HPK0-6 47.0 2 2 0 8 HPK0-8 47.0 2 9 2 0 HPK2-0 49.5 23 26 Equal union elbow 3 Part number O Width Weight dia. Q O ø 3xQ 8 4.2 EPK8 22.5 7 9.0 0 0 4.2 EPK0 28.5 2 23.5 7 2 4.2 EPK2 30.0 23 25.5 23 4 4.2 EPK4 33.5 25 27.5 3 Equal union tee 3 Part number O Width Weight dia. Q O ø 3xQ 8 4.2 JPK8 45 22.5 7 9.0 4 0 4.2 JPK0 57 28.5 2 23.5 24 2 4.2 JPK2 60 30.0 23 25.5 33 4 4.2 JPK4 67 33.5 25 27.5 45 Unequal union tee O ø 3xQ 2 3 Part number O Width Weight dia. Q 6 4 4.2 JPK6-6-4 4 2.5 5 7.0 2 8 6 4.2 JPK8-8-6 45 22.5 7 9.0 8 0 8 4.2 JPK0-0-857 28.5 2 23.5 29 2 0 4.2 JPK2-2-0 60 30.0 23 25.5 38 4 6 4.2 JPK4-4-6 43 20.5 5 7.0 7 6 8 4.2 JPK6-6-8 45 22.5 7 9.0 8 8 0 4.2 JPK8-8-0 57 28.5 2 23.5 34 0 2 4.2 JPK0-0-2 6 30.5 23 25.5 43 2 Pneumatic.35

Prestolok 2 - Dimensions Union Y connector 3 Part number 2 Width U Weight dia. Q 8 4.2 YJPK8 40 30 3.5 9 8.4 24 0 4.2 YJPK0 52 39 8.0 24 9.3 35 U 2 Ø3xQ Unequal union Y connector 2 3 Part number 2 Width U Weight dia. Q 6 8 4.2 YJPK6-6-8 40 30 3.5 9 7.0 32 8 0 4.2 YJPK8-8-0 40 3 3.6 9 8.4 43 U 2 2 Ø3xQ Union double Y connector 2 3 Part number 2 Width U Weight dia. Q U 2 2 4 4 3.2 YJ5PK4 35 22.5 9.5 24.5 4.4 20 6 4 4.2 YJ5PK6-4 38 22.5 9.5 24.5 7.0 22 2 Ø3xQ ultiple tee 2 3 Part number H N Width Weight dia. Q H ø 3xQ 6 4 4.4 J5PK6-4 27 78 52 8 5 6 8 4 4.4 J5PK8-4 28 80 52 8 7 2 8 6 4.4 J5PK8-6 30 80 52 8 7 9 0 6 4.4 J5PK0-6 33 90 52 8 2 24 2 2 2 N N ultiple tee 2 3 Part number H N Width Weight dia. Q H ø 3xQ 6 4 4.4 J6PK6-4 27 96 70 8 5 20 8 4 4.4 J6PK8-4 28 98 70 8 7 25 8 6 4.4 J6PK8-6 30 98 70 8 7 24 0 6 4.4 J6PK0-6 33 08 70 8 2 28 2 2 2 2 N N N Pneumatic.36

Prestolok 2 - Dimensions Tube end reducer 2 Part number Weight 2 4 6 TR2PK6-4 38 4 4 8 TR2PK8-4 36 6 6 8 TR2PK8-6 39 4 4 0 TR2PK0-4 4 6 6 0 TR2PK0-6 43 3 8 0 TR2PK0-8 47 4 6 2 TR2PK2-6 36 3 8 2 TR2PK2-8 38 7 0 2 TR2PK2-0 48 4 8 4 TR2PK4-8 39 8 0 4 TR2PK4-0 42 5 2 4 TR2PK4-2 5 4 Plug Double male union G Part number G Weight 4 FNPK4 34.5 6 FNPK6 35.0 8 FNPK8 35.0 2 0 FNPK0 42.0 9 2 FNPK2 4.0 0 4 FNPK4 40.0 0 Pressure indicator Part number Weight 4 PK4 38 6 PK6 4 8 PK8 4 0 PK0 5 2 2 PK2 54 2 4 PK4 55 2 Part number Weight 4 TS2PK4 36 5 6 TS2PK6 37 6 8 TS2PK8 36 8 ompact plug-in elbow 2 Part number H H H2 O Weight O 2 H 8 8 T2ESPK8 38.0 22 25.0 7 8 H H2 Pneumatic.37

Prestolok 2 - Dimensions Plug-in run tee N H 2 3 Part number H N O Width Weight dia. Q O ø 3xQ 2 4 4 3.2 T2JJPK4 9.5 8.0 33.5 3 5 7 6 6 4.2 T2JJPK6 2.0 20.5 36.5 5 7 9 8 8 4.2 T2JJPK8 22.0 22.5 39.5 7 9 3 Plug-in branch tee 2 3 Part number H N O Width Weight dia. Q O 4 4 3.2 T2JPK4 9.5 8.0 33.5 3 5 7 6 6 4.2 T2JPK6 2.0 20.5 36.5 5 7 9 8 8 4.2 T2JPK8 22.0 22.5 39.5 7 9 3 ø 3xQ N H 2 Plug-in Y connector 3 3 Part number 2 3 Width U Weight dia. Q 8 4.2 YJ2PK8 57.0 30 3.5 35 9 8.4 24 U 2 Ø3xQ Plug-in double Y connector 2 3 Part number 2 Width U Weight dia. Q 6 4 3.2 YJ52PK6-4 52 22.5 9.5 3 24.5 4.4 23 2 U 2 2 Ø3xQ Pneumatic.38

Prestolok 2 - Dimensions 90 adjustable bulkhead union elbow 3 Part number 4 O Width W Weight dia. Q ax. ø 3xQ W 4 4 3.2 x0.75 WE6P4 4 6 37 8.0 8.0.5 5.0 6 22 6 4.2 3x WE6P6 7 7 39 9.5 20.5 3.5 7.0 6 38 8 4.2 5x.25 WE6P8 9 9 43 2.5 22.5 5.5 9.0 6 52 0 4.2 8x WE6P0 22 22 54 29.0 28.5 8.5 23.5 8 07 2 4.2 23x.5 WE6P2 27 27 59 30.0 30.0 23.5 25.5 0 39 4 3.2 x0.75 WE6PK4 4 6 37 8.0 8.0.5 5.0 6 22 6 4.2 3x WE6PK6 7 7 39 9.5 20.5 3.5 7.0 6 38 8 4.2 5x.25 WE6PK8 9 9 43 2.5 22.5 5.5 9.0 6 52 0 4.2 8x WE6PK0 22 22 54 29.0 28.5 8.5 23.5 8 07 2 4.2 23x.5 WE6PK2 27 27 59 30.0 30.0 23.5 25.5 0 39 O djustable male bulkhead Y connector W 3 Part number 4 2 Width U W Weight dia. Q axi U Ø3xQ 2 4 x0.75 3.2 WYJ6PK4 4 6 46 22.0 27 5 4.4 6 38 6 3x 4.2 WYJ6PK6 7 7 54 30 3.5 35 7 7.0 6 2 8 5x.25 4.2 WYJ6PK8 9 9 64 30 3.5 35 9 8.4 6 50 4 anifold for 2 tubes and pressure indicator Part number X Weight 4 HS3PK4 4 6 2 2 6 HS3PK6 5 8 4 5 8 HS3PK8 5 29 4 3 X anifold for 3 tubes Part number X Weight 4 J3PK4 4 6 2 0 6 J3PK6 5 8 4 2 8 J3PK8 5 29 6 35 X Pneumatic.39

Prestolok - Dimensions ale connector - SPP 4 J Part number 4 J H Weight Int. 8 /8 F4P8-/8 9 9 25.0 4 4 8 /4 F4P8-/4 9 9 27.5 4 29 8 3/8 F4P8-3/8 22 9 27.5 4 59 0 /4 F4P0-/4 9 9 35.5 6 50 0 3/8 F4P0-3/8 22 9 30.5 8 39 0 3/8 F4P0-/2 27 2 29.0 8 60 2 /4 F4P2-/4 22 9 35.0 6 49 2 3/8 F4P2-3/8 22 9 35.0 0 49 2 3/8 F4P2-/2 27 2 33.0 0 72 4 3/8 F4P4-3/8 24 9 38.5 0 66 4 /2 F4P4-/2 27 2 37.0 8 Female connector - SPP 4 J Part number 4 J Weight 4 /8 G4P4-/8 4 9.5 26.0 22 6 /8 G4P6-/8 4 9.5 27.5 2 6 /4 G4P6-/4 7 4.0 33.0 22 8 /8 G4P8-/8 7 9.5 29.0 44 8 /4 G4P8-/4 7 4.0 33.0 29 ale connector - SPT 0 Threads are treated with Parker Teflon oating (PT) sealing material P PT Part number O P H. Weight Int. 4 /8 F23P4-/8 2 0 6.5 3 7 6 /8 F23P6-/8 24 2 6.5 4 0 6 /4 F23P6-/4 28 4 9.7 4 22 8 /8 F23P8-/8 28 4 6.5 6 9 8 /4 F23P8-/4 28 4 9.7 6 25 This fitting has been designed for use where space is at a premium. It is assembled using the internal hexagon and an llen key. ale connector - SPT 4 P PT Threads are treated with Parker Teflon oating (PT) sealing material Part number 4 P H. Weight Int. 4 /8 F3P4-/8 2 20.5 7.5 3 4 4 /4 F3P4-/4 4 23.0.0 3 2 5 /8 F3P5-/8 22.5 7.5 4 3 5 /4 F3P5-/4 4 24.0.0 4 7 6 /8 F3P6-/8 4 24.0 7.5 4 9 6 /4 F3P6-/4 4 24.0.0 4 22 8 /8 F3P8-/8 7 28.0 7.5 4 3 8 /4 F3P8-/4 7 28.5.0 4 3 8 3/8 F3P8-3/8 7 26.5.5 6 28 0 /4 F3P0-/4 9 35.5.0 6 45 0 3/8 F3P0-3/8 9 33.0.5 8 48 0 /2 F3P0-/2 22 3.0 5.0 8 47 2 /4 F3P2-/4 22 36.5.0 6 68 2 3/8 F3P2-3/8 22 36.0.5 0 48 2 /2 F3P2-/2 22 36.0 5.0 0 56 4 3/8 F3P4-3/8 24 39.0.5 0 9 4 /2 F3P4-/2 24 37.0 5.0 83 Pneumatic.40

Prestolok - Dimensions djustable male elbow - metric straight thread Part number 4 J N Weight N 4 3x0.5 68P43 0 0 3.25 8 23.0 5 4 5x0.8 68P45 0 0 5.00 8 24.5 6 6 5x0.8 68P65 2 5.00 20 25.5 24 4 J djustable male elbow - SPP 4 J N Part number 4 J N Weight 4 /8 64P4-/8 0 4 6 8 26.5 22 4 /4 64P4-/4 0 9 9 8 3.5 37 6 /8 64P6-/8 2 4 6 20 30.0 30 6 /4 64P6-/4 2 9 9 20 33.0 4 8 /8 64P8-/8 4 4 6 22 30.0 35 8 /4 64P8-/4 4 9 9 22 35.0 47 8 3/8 64P8-3/8 4 22 9 22 36.0 62 0 /4 64P0-/4 7 9 9 28 39.0 66 0 3/8 64P0-3/8 7 22 9 28 40.0 82 2 /4 64P2-/4 22 9 9 30 4.0 06 2 3/8 64P2-3/8 22 22 9 30 42.0 0 4 3/8 64P4-3/8 25 22 9 34 46.0 58 4 /2 64P4-/2 25 27 2 34 50.5 88 ompact adjustable male elbow - metric straight thread Part number ø 4 J N Weight 4 5x0.8 68SPK45 0 2.5 5 7 8 6 ø 4 J N ompact adjustable male elbow - SPP Part number ø 4 J N Weight ø 4 J N 4 /8 64SP4-/8 3 6 8 8.5 9 6 /8 64SP6-/8 3 3 6 24 9.5 25 6 /4 64SP6-/4 3 6 9 24 23.0 30 8 /8 64SP8-/8 5 3 6 26 2.0 38 8 /4 64SP8-/4 5 6 9 26 24.0 43 8 3/8 64SP8-3/8 5 9 9 26 24.0 48 0 /4 64SP0-/4 8 6 9 32 26.0 55 0 3/8 64SP0-3/8 8 9 9 32 26.0 60 2 /4 64SP2-/4 2 6 9 32 25.5 67 2 3/8 64SP2-3/8 2 9 9 32 25.5 75 2 /2 64SP2-/2 2 24 2 32 30.5 84 Pneumatic.4

Prestolok - Dimensions ompact elbow - SPT PT Threads are treated with Parker Teflon oating (PT) sealing material P N Part number N P Weight 4 /8 3P4-/8 4 8 2 7.5 23 6 /8 3P6-/8 4 20 2 7.5 24 6 /4 3P6-/4 4 20 2.0 25 8 /8 3P8-/8 4 22 23 7.5 24 8 /4 3P8-/4 4 22 23.0 25 0 /4 3P0-/4 7 28 26.0 67 0 3/8 3P0-3/8 7 28 26.5 89 2 3/8 3P2-3/8 7 30 27.5 69 2 /2 3P2-/2 7 30 3 5.0 72 4 3/8 3P4-3/8 20 34 30.5 97 4 /2 3P4-/2 20 34 33 5.0 97 djustable male elbow - SPT 4 PT Threads are treated with Parker Teflon oating (PT) sealing material P N Part number 4 N P Weight 4 /8 63P4-/8 0 0 8 26.5 7.5 9 4 /4 63P4-/4 0 4 8 30.0.0 27 6 /8 63P6-/8 2 20 28.0 7.5 25 6 /4 63P6-/4 2 4 20 3.0.0 35 8 /8 63P8-/8 4 4 22 30.0 7.5 33 8 /4 63P8-/4 4 4 22 33.0.0 40 8 3/8 63P8-3/8 4 7 22 34.5.5 5 0 /4 63P0-/4 7 7 28 40.0.0 59 0 3/8 63P0-3/8 7 7 28 39.0.5 65 2 /4 63P2-/4 22 9 30 42.0.0 05 2 3/8 63P2-3/8 22 9 30 4.0.5 09 2 /2 63P2-/2 22 22 30 44.5 5.0 8 4 3/8 63P4-3/8 25 22 34 46.0.5 52 4 /2 63P4-/2 25 22 34 48.5 5.0 62 djustable extended male elbow - SPT Part number 4 N P Weight 4 P N 4 /8 63P4-/8 0 0 8 42.0 7.5 28 4 /4 63P4-/4 0 4 8 46.0.0 52 6 /8 63P6-/8 2 20 45.5 7.5 40 6 /4 63P6-/4 2 4 20 49.5.0 60 8 /8 63P8-/8 4 4 22 50.0 7.5 59 8 /4 63P8-/4 4 4 22 52.5.0 64 PT Threads are treated with Parker Teflon oating (PT) sealing material Pneumatic.42

Prestolok - Dimensions djustable male run tee - SPP N J 4 Part number 4 J N Weight 4 /8 R64P4-/8 0 4 6 44.5 8 26.5 26 4 /4 R64P4-/4 0 9 9 49.5 8 3.5 4 6 /8 R64P6-/8 2 4 6 50.0 20 30.0 33 6 /4 R64P6-/4 2 9 9 53.0 20 33.0 44 8 /8 R64P8-/8 4 4 6 52.0 22 30.0 42 8 /4 R64P8-/4 4 9 9 57.0 22 35.0 54 8 3/8 R64P8-3/8 4 22 9 58.0 22 36.0 69 0 /4 R64P0-/4 7 9 9 67.0 28 39.0 85 0 3/8 R64P0-3/8 7 22 9 68.0 28 40.0 0 2 /4 R64P2-/4 22 9 9 7.0 30 4.0 33 2 3/8 R64P2-3/8 22 22 9 72.0 30 42.0 36 4 3/8 R64P4-3/8 25 22 9 80.0 34 46.0 203 4 /2 R64P4-/2 25 27 2 84.5 34 50.5 232 djustable male run tee - metric straight thread N J Part number 4 J N Weight 4 5x0.8 R68P45 0 0 5.00 42.5 8 24.5 20 6 5x0.8 R68P65 2 5.00 45.5 20 25.5 27 4 djustable male branch tee - metric straight thread Part number 4 J N Weight N 4 5x0.8 S68P45 0 0 5.00 36 8 24.5 20 6 5x0.8 S68P65 2 5.00 40 20 25.5 27 J 4 djustable male branch tee - SPP N J 4 Part number 4 J N Weight 4 /8 S64P4-/8 0 4 6 36 8 26.5 26 4 /4 S64P4-/4 0 9 9 36 8 3.5 4 6 /8 S64P6-/8 2 4 6 40 20 30.0 33 6 /4 S64P6-/4 2 9 9 40 20 33.0 44 8 /8 S64P8-/8 4 4 6 44 22 30.0 42 8 /4 S64P8-/4 4 9 9 44 22 35.0 54 8 3/8 S64P8-3/8 4 22 9 44 22 36.0 69 0 /4 S64P0-/4 7 9 9 56 28 39.0 85 0 3/8 S64P0-3/8 7 22 9 56 28 40.0 0 2 /4 S64P2-/4 22 9 9 60 30 4.0 33 2 3/8 S64P2-3/8 22 22 9 60 30 42.0 36 4 3/8 S64P4-3/8 25 22 9 68 34 46.0 203 4 /2 S64P4-/2 25 27 2 68 34 50.5 232 Pneumatic.43

Prestolok - Dimensions djustable male run tee - SPT N P 4 Threads are treated with Parker Teflon oating (PT) sealing material PT Part number 4 N P Weight 4 /8 R63P4-/8 0 0 44.5 8 26.5 7.5 23 4 /4 R63P4-/4 0 4 48.0 8 30.0.0 3 6 /8 R63P6-/8 2 48.0 20 28.0 7.5 28 6 /4 R63P6-/4 2 4 5.0 20 3.0.0 38 8 /8 R63P8-/8 4 4 52.0 22 30.0 7.5 40 8 /4 R63P8-/4 4 4 55.0 22 33.0.0 46 8 3/8 R63P8-3/8 4 7 56.5 22 34.5.5 58 0 /4 R63P0-/4 7 7 68.0 28 40.0.0 77 0 3/8 R63P0-3/8 7 7 67.0 28 39.0.5 84 2 /4 R63P2-/4 22 9 72.0 30 42.0.0 32 2 3/8 R63P2-3/8 22 9 7.0 30 4.0.5 35 2 /2 R63P2-/2 22 22 74.5 30 44.5 5.0 44 4 3/8 R63P4-3/8 25 22 80.0 34 46.0.5 97 4 /2 R63P4-/2 25 22 82.5 34 48.5 5.0 207 djustable male branch tee - SPT 4 PT Threads are treated with Parker Teflon oating (PT) sealing material P N Part number 4 N P Weight 4 /8 S63P4-/8 0 0 36 8 26.5 7.5 23 4 /4 S63P4-/4 0 4 36 8 30.0.0 3 6 /8 S63P6-/8 2 40 20 28.0 7.5 28 6 /4 S63P6-/4 2 4 40 20 3.0.0 38 8 /8 S63P8-/8 4 4 44 22 30.0 7.5 40 8 /4 S63P8-/4 4 4 44 22 33.0.0 46 8 3/8 S63P8-3/8 4 7 44 22 34.5.5 58 0 /4 S63P0-/4 7 7 56 28 40.0.0 77 0 3/8 S63P0-3/8 7 7 56 28 39.0.5 84 2 /4 S63P2-/4 22 9 60 30 42.0.0 32 2 3/8 S63P2-3/8 22 9 60 30 4.0.5 35 2 /2 S63P2-/2 22 22 60 30 44.5 5.0 44 4 3/8 S63P4-3/8 25 22 68 34 46.0.5 97 4 /2 S63P4-/2 25 22 68 34 48.5 5.0 207 Equal union Part number irclips* O Weight O 4 HP4 IR4 33.0 0 5 HP5 IR5 34.5 5 6 HP6 IR6 36.0 2 3 8 HP8 IR8 38.0 4 6 0 HP0 IR0 48.0 7 27 2 HP2 IR2 48.0 2 58 4 HP4 IR4 54.0 22 7 * Unions can be used as bulkhead unions. Simply mount two circlips in the machined grooves provided. Three grooves are provided to allow for a range of wall thickness :.5, 2 and 5 mm. Equal union elbow Part number Weight 4 EP4 0 8.0 2 6 EP6 2 20.0 9 8 EP8 4 22.0 22 0 EP0 7 28.0 38 2 EP2 22 30.0 73 4 EP4 25 34.0 6 Pneumatic.44

Prestolok - Dimensions Equal union tee Part number Weight 4 JP4 0 36 8.0 6 5 JP5 2 4 20.5 28 6 JP6 2 40 20.0 22 8 JP8 4 44 22.0 29 0 JP0 7 56 28.0 57 2 JP2 22 60 30.0 00 4 JP4 25 68 34.0 60 Tube end expander 2 Part number Weight 4 6 TEP4-6 39 9 7 2 Tube end reducer 2 Part number Weight 2 6 4 TRP6-4 40.0 22 8 8 4 TRP8-4 39.5 22 0 8 6 TRP8-6 4.5 22 0 0 4 TRP0-4 37.0 27 27 0 6 TRP0-6 43.0 27 5 0 8 TRP0-8 47.5 27 6 2 6 TRP2-6 38.0 27 23 2 8 TRP2-8 44.0 27 7 2 0 TRP2-0 52.0 27 20 4 8 TRP4-8 4.0 30 3 4 0 TRP4-0 5.0 30 23 4 2 TRP4-2 55.0 30 36 Plug Part number Weight 4 6 FNP4 FNP6 27 27 2 5 8 FNP8 30 2 0 FNP0 30 23 2 FNP2 35 35 4 FNP4 36 46 Pneumatic.45

Prestolok - Dimensions ulkhead equal union W 4 4 O Part number 4 O W Weight ax. 4 x0.75 WP4 6 33.5 6 8 6 3x WP6 9 35 3.5 6 22 8 6x.25 WP8 22 36 6.5 6 27 0 8x WP0 22 43 8.5 8 55 2 23x.5 WP2 27 46 23.5 0 09 4 24x.5 WP4 30 52 24.5 0 9 90 O adjustable bulkhead union elbow Part number 4 O W Weight ax. W 4 x0.75 WE6P4 4 6 37 8.0 8.0.5 6 28 6 3x WE6P6 7 7 39 9.5 20.5 3.5 6 50 8 6x.25 WE6P8 9 9 43 2.5 22.5 5.5 6 65 0 8x WE6P0 22 22 54 29.0 28.5 8.5 8 28 2 23x.5 WE6P2 27 27 59 30.0 30.0 23.5 0 89 4 O Single banjo - assembled Part number D J K N O Y Weight Y D N K O J 4 5x0.8 OR8P45 8 8.2 4.5.0 24.0 9.0 3.5 6.0 0 8 4 /8 OR4P4-/8 4 4.4 6.0.5 29.5 22.5 9.5 8.5 4 3 6 /8 OR4P6-/8 4 4.4 6.0.5 30.0 23.0 9.5 8.5 4 32 6 /4 OR4P6-/4 7 8.4 9.0 2.0 33.0 24.5 2.0 9.0 7 48 8 /8 OR4P8-/8 4 4.4 6.0.5 3.0 34.0 9.5 8.5 4 58 8 /4 OR4P8-/4 7 8.4 9.0 2.0 34.0 25.5 2.0 9.0 7 86 0 3/8 OR4P0-3/8 22 2.6 9.0 2.5 43.0 32.0 25.5.0 22 22 These parts are delivered complete with sealing washer. Double banjo - assembled Part number D J K N O Y Weight Y N K O J 4 5x0.8 OR8P4D5 8 8.2 4.5.0 38 9.0 3.5 6.0 0 23 4 /8 OR4P4D/8 4 4.4 6.0.5 45 22.5 9.5 8.5 4 37 6 /8 OR4P6D/8 4 4.4 6.0.5 46 23.0 9.5 8.5 4 38 6 /4 OR4P6D/4 7 8.4 9.0 2.0 49 24.5 2.0 9.0 7 75 8 /8 OR4P8D/8 4 4.4 6.0.5 48 24.0 9.5 8.5 4 76 D These parts are delivered complete with sealing washer. Pneumatic.46

Prestolok - Dimensions Single banjo body only Part number Part No. Part No. X Y Weight single bolt stacking bolt Y X 4 ORP4-5 S8U5-4 S8UD5-4 9.0 0 0 8 4 ORP4-0 S4U/8-4 S4UD/8-4 22.5 4 4 6 6 ORP6-0 S4U/8-4 S4UD/8-4 23.0 4 4 7 6 ORP6-3 S4U/4-6 S4UD/4-6 24.5 4 7 2 8 ORP8-0 S4U/8-4 S4UD/8-4 24.0 4 4 44 8 ORP8-3 S4U/4-6 S4UD/4-6 25.5 4 7 59 0 ORP0-7 S4U3/8-0 S4UD3/8-0 32.0 7 22 27 Double banjo body only X Y Part number Part No. Part No. X Y Weight single bolt stacking bolt 4 ORP4D5 S8U5-4 S8UD5-4 38 9.0 0 0 3 4 ORP4D0 S4U/8-4 S4UD/8-4 45 22.5 4 4 22 6 ORP6D0 S4U/8-4 S4UD/8-4 46 23.0 4 4 23 6 ORP6D3 S4U/4-6 S4UD/4-6 49 24.5 4 7 47 8 ORP8D0 S4U/8-4 S4UD/8-4 48 24.0 4 4 6 Single banjo bolt with seals Part number D J K Weight K J 5x0.8 S8U5-4 8 8.2 4.5.0 8.5 0 /8 S4U/8-4 4 4.4 6.0.5 25.5 5 /4 S4U/4-6 7 8.4 9.0 2.0 30.0 27 3/8 S4U3/8-0 22 2.6 9.0 2.5 34.5 24 D Stacking banjo bolt with seals Part number D J K Weight 5x0.8 S8UD5-4 8 8.2 4.5.0 29.5 6 /8 S4UD/8-4 4 4.4 6.0.5 4.0 9 /4 S4UD/4-6 7 8.4 9.0 2.0 46.0 28 K J D Pneumatic.47

Pneumatic.48

Pneumatic ylinder ontrol ccessories

ylinder ontrol ccessories Speed/flow controllers lockers PWR- PWR-H PWR- PWR-E PWR- 33 3250 VQ PW Symbol ody material: etal Thermoplastic ounting: On cylinder In line Panel On valve djustment: y tool y hand icrometer adjustment Sizes 3/4 2 mm /2 0 mm 3/8 8 mm /4 6 mm /8 4 mm 5 Refer to page 2.4 2.5 2.6 2.7 2.8 2.9 2.0-2. 2.2-2.3 2.4-2.5 Pneumatic 2.2

ylinder ontrol ccessories Unloaders PWE Shuttle valves Sensors PWS Optimisers Soft Start Non return valves PWR-H PWE PWR-HE P4Q 5 PWS PWP PWD 3047 V PW & 8 mm 6 mm 4 mm 2.4-2.5 2.6-2.7 2.6-2.7 2.8 2.9 2.20-2.2 2.22 2.23 2.24 2.25 2.26 Pneumatic 2.3

Speed/Flow ontrol PWR- For direct mounting on to cylinder llen key adjustment with lock nut Threaded ports or push-in connection Wide range of sizes Operating and additional information Operating pressure: Permissible fluids: Flow: Operating temperature: Storage temperature: Vibration resistance: aximum connecting torque: ody material: onnection thread: djustment mode: djustment locking: to 0 bar ir or neutral gas 50micron or filtration, lubricated or not See table below -5 O to +60 O -40 O to +70 O onforming to section 9-2 of ureau Veritas regulations /8 = 8 Nm ; /4 = 2Nm; 3/8 = 30Nm; /2 = 35Nm Zinc alloy rass y allen key y hexagonal lock nut ain data for Speed ontrols, PWR- Series With push-in connection llen key adjustment and locknut With threaded connection llen key adjustment and locknut Symbol Symbol Thread Port Number of Qmax input Weight Order code thread turns at 6 bar, l/min* Kg G/8 4 0 350 0,06 PWR-448 G/8 6 0 450 0,06 PWR-468 G/8 8 4 650 0,0 PWR-488 G/4 6 4 750 0,0 PWR-469 G/4 8 4 900 0,09 PWR-489 G/4 0 4 850 0,4 PWR-499 G3/8 8 4 750 0,4 PWR-483 G3/8 0 4 2050 0,3 PWR-493 G/8 2 20 2750 0,52 PWR-42 G/8 4 20 2750 0,53 PWR-422 Thread Port Number of Qmax input Weight Order code thread turns at 6 bar, l/min* Kg G/8 G/8 0 450 0,07 PWR-888 G/4 G/4 4 900 0, PWR-889 G3/8 G3/8 4 950 0,5 PWR-833 G/2 G/2 20 2750 0,55 PWR-822 * Screw closed H D 4 /2 Ø K H D 4 /2 2 Ø K D Order code Ø D H K 2 PWR-448 7 8 4 45 7 32 PWR-468 7 8 4 45 7 32 PWR-888 7 8 4 45 7 36,5 PWR-488 22 2 4 55 2 39 PWR-489 22 2 7 55 2 39 PWR-469 22 2 7 55 2 39 PWR-899 22 2 7 55 2 43,5 PWR-499 27 28 7 60 26 50 PWR-483 27 28 24 60 26 50 PWR-493 27 28 24 60 26 50 PWR-833 27 28 24 60 26 55,5 PWR-42 3 33 27 77 35 66 PWR-422 3 33 27 77 35 66 PWR-822 3 33 27 77 35 63,0 Pneumatic 2.4

Speed/Flow ontrol PWR-H For direct mounting on to cylinder anual barrel adjustment with lock nut Push-in connection Wide range of sizes Operating and additional information Operating pressure: Permissible fluids: Flow: Operating temperature: Storage temperature: Vibration resistance: aximum connecting torque: ody material: onnection thread: djustment mode: djustment locking: to 0 bar ir or neutral gas 50micron or filtration, lubricated or not See table below -5 O to +60 O -40 O to +70 O onforming to section 9-2 of ureau Veritas regulations /8 = 8 Nm ; /4 = 2Nm; 3/8 = 30Nm Thermo plastic rass Rotating barrel Knurled lock nut ain data for Speed ontrols, PWR-H Series With push-in connection barrel adjustment and locknut Symbol Thread Push-in djustment Qmax input Weight Order code connection angle at 6 bar, l/min* Kg G/8 4 285 O 370 0,06 PWR-H448 G/8 6 285 O 660 0,06 PWR-H468 G/4 6 285 O 830 0,06 PWR-H469 G/4 8 285 O 200 0,06 PWR-H489 G3/8 8 285 O 2000 0,2 PWR-H483 G3/8 0 285 O 2000 0,2 PWR-H493 * Screw closed P Order code Ø D H K P H D K Ø PWR-H448 22,5 2 9 35,0 20,7 47,0 2,7 PWR-H468 22,5 2 9 35,0 20,7 47,0 2,7 PWR-H469 22,5 2 9 75,0 20,7 47,0 2,7 PWR-H489 22,5 2 9 35,0 20,7 47,0 2,7 PWR-H483 29,0 28 27 42,5 25,0 60,0 5,0 PWR-H493 29,0 28 27 42,5 25,0 60,0 5,0 Pneumatic 2.5

Speed/Flow ontrol PWR- For direct mounting on to valve For direct mounting on to single acting cylinders djustment by knob (PWR-E adjusted by screw driver) Wide range of sizes Operating and additional information Operating pressure: Permissible fluids: Flow: Operating temperature: Storage temperature: Vibration resistance: aximum connecting torque: ody material: onnection thread: djustment mode: djustment locking: to 0 bar ir or neutral gas 50micron or filtration, lubricated or not See table below -5 O to +60 O -40 O to +70 O onforming to section 9-2 of ureau Veritas regulations 5 = Nm; /8 = 8 Nm ; /4 = 2Nm Zinc alloy rass Knurled knob Hexagonal lock nut ain data for Speed ontrols, PWR- Series With push-in connection knob adjustment and locknut Symbol Thread Push-in djustment Qmax input Weight Order code connection angle at 6 bar, l/min* Kg 5** 4 2 50 0,02 PWR-E45 G/8 4 7 350 0,06 PWR-48 G/8 6 7 620 0,06 PWR-68 G/4 6 0 430 0,08 PWR-69 G/4 8 0 50 0,08 PWR-89 ** Flow rate adjustment carried out using a screw driver, no locknut - ody in plastic * Screw closed Ø Order code Ø H+ H- K H /2 K PWR-E45 8 7 7 7,2 2,0 PWR-48 4 8 46 40 0,0 25,0 PWR-68 4 8 46 40 0,0 25,0 PWR-69 6 2 49 42,0 28,5 PWR-89 6 2 49 42,0 28,5 Pneumatic 2.6

Speed/Flow ontrol PWR-E For direct mounting on to cylinder llen key adjustment with friction locking Protective cap Wide range of sizes Operating and additional information Operating pressure: Permissible fluids: Flow: Operating temperature: Storage temperature: Vibration resistance: aximum connecting torque: ody material: onnection thread: djustment mode: djustment locking: to 0 bar ir or neutral gas 50micron or filtration, lubricated or not See table below -5 O to +60 O -40 O to +70 O onforming to section 9-2 of ureau Veritas regulations 5 = Nm; /8 = 8 Nm ; /4 = 2Nm; 3/8 = 30Nm Thermo plastic rass llen key Friction cap ain data for Speed ontrols, PWR-E Series Symbol Thread Push-in Number Qmax input Weight Order code connection of turns at 6 bar, l/min* Kg With push-in connection llen key adjustment friction locking 5** 4 2 50 0,02 PWR-E445 G/8 4 4 290 0,04 PWR-E448 G/8 6 4 650 0,04 PWR-E468 G/4 6 8 650 0,05 PWR-E469 G/4 8 8 200 0,05 PWR-E489 G3/8 8 8 350 0,07 PWR-E483 G3/8 0 8 200 0,08 PWR-E493 * Screw closed ** Flow rate adjustment carried out using a screw driver. Order code Ø D E H K D PWR-E445 4,0 8 7 7,2 2 K H E D K H * ** 3 mm () 4 mm (2) * PWR-E448 8,0 4 6,5 45 23,8 24 * PWR-E468 8,0 4 6,5 45 23,8 24 ** PWR-E469 6 0,5 7 2,0 49,3 26,5 27 ** PWR-E489 6 0,5 7 2,0 49,3 26,5 27 ** PWR-E483 20,5 22 23,0 56,8 29,8 33 ** PWR-E493 20,5 22 23,0 56,8 29,8 33 Pneumatic 2.7

Speed/Flow ontrol PWR- For inline or surface mounting anual adjustment by knob with lock nut Instant push-in fitting High flow Wide range of sizes Operating and additional information Operating pressure: Permissible fluids: Flow: Operating temperature: Storage temperature: Vibration resistance: ody material: djustment mode: djustment locking: to 0 bar ir or neutral gas 50micron or filtration, lubricated or not See table below -5 O to +70 O -20 O to +70 O onforming to section 9-2 of ureau Veritas regulations Thermo plastic Knurled knob Hexagonal lock nut ain data for Speed ontrols, PWR- Series With push-in connection knob adjustment and locknut Symbol Push-in djustment Qmax input Weight Order code connection angle at 6 bar, l/min* Kg 4 3 200 0,02 PWR-444 6 2 400 0,04 PWR-466 8 5 720 0,06 PWR-488 0 8 360 0,3 PWR-499 2 20 950 0,5 PWR-4 * Screw closed F Type F F e H+ H- H Q F H H e PWR-444 2,0 4 * 6 25,5 2,5 6,5 39,0 0,5 PWR-466 7,0 9 * 7 32,5 27,5 7,5 54,0 7,0 PWR-488 8,5 24 7 34,5 28,5 9,0 60,5 9,0 PWR-499 24,0 30 4 7 38,5 29,5,5 76,0 25,0 PWR-4 28,0 32 4 8 42,0 32,0 2,5 86,0 28,0 Pneumatic 2.8

icrometer Flow ontrols 33** icrometer type adjustment Fine control Integral mounting hole Non-return and needle valves For detailed information see technical leaflet 240 Operating and additional information Operating pressure: Flow: Operating temperature: ody material: ontrol knob: djustment mode: 0 to 7 bar See curve below -40 O to +80 O rass luminium Knurled knob Flow ontrol with y-pass Symbol Thread Number Qmax input Weight Order code of turns at 6 bar, l/min Kg G/8 5 300 0,076 337 G/4 6 780 0,34 337 Flow ontrol with y-directional ontrol Symbol Thread Number Qmax input Weight Order code of turns at 6 bar, l/min Kg G/8 5 300 0,078 338 G/4 6 780 0,32 338 icrometer Flow ontrol Valves - Dimensions 6 G/4 5 Number of turns 4 3 2 G/8 H G J E F 0 9 Order Port D D2 E F G H J code size open closed D2 D 2 3 4 5 6 7 8 9 0 2 3 itres/s 337 G/8 4,5 4,5 9 5 46 40 2 - - - 337 G/4 7,5 8,0 9 58 5 50 2 4,8 9 0 338 G/8 4,5 4,5 9 5 46 40 2 - - - 338 G/4 7,5 8,0 9 58 5 50 2 4,8 9 0 Pneumatic 2.9

Heavy Duty Inline Flow Regulator 3250 Screw driver or hand adjustment Rugged brass bodies Panel mounted versions High flow rate High flow by-pass Wide range of sizes Operating and additional information Operating pressure: Operating temperature: ody material: ontrol knob: djustment mode: 0 to 28 bar for air - 0 to 55 bar oil or water -0 O to +80 O rass rass Knurled knob or screw driver adjustment Standard Type Symbol Thread Number Qmax input Weight Order code of turns at 6 bar, l/min* Kg G/8 6 320 0,4 3250X G/4 5 2880 0,224 3250 G3/8 5 6300 0,378 3250 G/2 5 7680 0,792 3250 G3/4 4,5 0680,300 3250D Panel ounting Type Symbol Thread Number Qmax input Weight Order code of turns at 6 bar, l/min* Kg G/8 6 320 0,20 3250XP G/4 5 2880 0,226 3250P Panel ounted Hand djustment Type Symbol Thread Number Qmax input Weight Order code of turns at 6 bar, l/min* Kg G/8 6 320 0,28 3250HX G/4 5 2880 0,238 3250H Pneumatic 2.0

Heavy Duty Inline Flow Regulator 3250 Dimensions, Flow ontrol Valves, 3250 Series Flow ontrol Valves, Panel ounted Hand djustment Type Order code Port D size D 3250HX G/8 44 57 2 20 3250H G/4 57 70 32 25 Flow ontrol Valves, Standard Type Order code Port size 3250X G/8 44 40 2 3250 G/4 57 5 28 3250 G3/8 68 64 35 3250 G/2 79 78 4 3250D G3/4 90 92 5 Flow ontrol Valves, Panel ounted Type Order code Port D size D 3250XP G/8 44 40 2 20 3250P G/4 57 5 32 25 Pneumatic 2.

Speed Flow ontrol Valves VQ Integral mounting holes Screw driver adjustable Panel mounting option Roller for mechanical actuation available For detailed information see technical leaflet 927 0035-02 Operating information Working pressure ax 0 bar Working temperature -20 to +70 Flow ontrol Valves with y-pass Symbol Thread Number Qmax input Weight Order code of turns at 6 bar, l/min* Kg Flow ontrol Valves with y-directional ontrol Symbol Roller Operated, Flow ontrol Valves with y-pass G/8 3 72 0,03 VQ2-Q-0X-5* G/8 3 240 0,03 VQ2-Q-0-5 G/4 3 320 0,07 VQ22-Q-0-5 G/2 3 3600 0,27 VQ42-Q-0-5 Thread Number Qmax input Weight Order code of turns at 6 bar, l/min* Kg G/8 3 72 0,03 VQ2-0X-5* G/8 3 240 0,03 VQ2-0-5 G/4 3 320 0,07 VQ22-0-5 G/2 3 3600 0,26 VQ42-0-5 * Extra fine adjustment Symbol. Thread Qmax input Weight Order code at 6 bar, l/min* Kg G/4 320 0, VQ22-Q-0WG-5 G/2 3600 0,27 VQ42-Q-0WG-5 knob and nut for Panel ounting To Suit Weight Order code Kg VQ2 0,008 928 772-2 VQ22 0,04 928 772-22 VQ42 0,037 928 772-42 Pneumatic 2.2

Speed Flow ontrol Valves VQ Dimensions, Flow ontrol Valves, VQ Series Flow ontrol Valves - Dimensions Order D E F G H I code I K VQ2-Q-OX-5 49 42 22 5 6,5 G/8 5,8 24 2x VQ2-Q-O-5 49 42 22 5 6,5 G/8 5,8 24 2x VQ22-Q-O-5 64 53 30 2 8,5 G/4 7,0 32 6x VQ42-Q-O-5 99 85 50 36 6,5 G/2 7,0 50 24x,5 O P T D R H S G F E Order K O P R S T code VQ2-Q-OX-5,2 32 5 - - - 3,5 8,8 VQ2-Q-O-5,2 32 5 - - - 3,5 8,8 VQ22-Q-O-5,2 42 20 6,0 4 7 6,0 0,0 VQ42-Q-O-5,8 62 30 9,5 4 7 20,5 5,2 Roller operated, Flow ontrol Valves - Dimensions Order D E F G H code H J K VQ22-Q-OWG-5 64,5 42 20 68 55 30 2 8,5 VQ42-Q-OWG-5 64,5 62 30 88 75 50 36 5,0 Order J K O S X code D E X VQ22-Q-OWG-5 6 6 8,5 32 7 G/4 VQ42-Q-OWG-5 6 6 6,5 50 7 G/2 F S G O Pneumatic 2.3

locker and locker/flow regulator PW/PWR-H For direct cylinder mounting locker only or multifunction options Threaded or push-in ports locker/flow Regulator device adjustable with manual barrel Wide range of sizes Operating information Operating pressure: Permissible fluids: Flow: Operating temperature: Storage temperature: No. of operations with dry air at 6 bar 20 O Hz: aximum operating freqency: Vibration resistance: aximum connecting torque: ody material (locker): ody material (lcoker/flow Regulator): onnection thread: djustment mode (locker/flow Regulator): djustment locking (locker/flow Regulator): to 0 bar ir or neutral gas 50micron or filtration, lubricated or not See table opposite -5 O to +60 O -40 O to +70 O 0 million 0Hz onforming to section 9-2 of ureau Veritas regulations /8 = 8Nm ; /4 = 2Nm; 3/8 = 30Nm; /2 = 35Nm Zinc alloy Thermo plastic rass Rotating barrel Knurled lock nut With Push-in onnection Symbol onnection Thread onnection for Qmax input Weight Order for pilot port tube,ømm at 6 bar, l/min* kg code Push-in Ø4mm G/8 6 500 0,5 PW-468 G/4 6 650 0,5 PW-469 G/4 8 650 0,5 PW-489 G3/8 8 300 0,8 PW-483 G3/8 0 300 0,8 PW-493 G/2 2 2300 0,50 PW-42 With Threaded onnection Symbol onnection Thread onnection for Qmax input Weight Order for pilot port tube,ømm at 6 bar, l/min* kg code Push-in Ø4mm G/8 G/4 500 0,8 PW-898 G/4 G/4 650 0,8 PW-899 5* G3/8 G3/8 300 0,9 PW-833 G/2 G/2 2300 0,48 PW-822 * vailable with Ø4mm push-in connection, add4 to the end of the Order code; example: PW-8994 With Push-in onnection, arrel djustment and ocknut Symbol onnection Thread onnection for Qmax input Weight Order for pilot port tube,ømm at 6 bar, l/min* kg code Ø4mm G/8 4 330 0,3 PWR-H448 G/8 6 40 0,3 PWR-H468 G/4 6 420 0,3 PWR-H469 G/4 8 420 0,3 PWR-H489 G3/8 8 50 0,8 PWR-H483 G3/8 0 50 0,8 PWR-H493 Pneumatic 2.4

locker and locker/flow regulator PW/PWR-H lockers Pilot Depilot operating pressure operating pressure 2bar 4bar 6bar 8bar 2bar 4bar 6bar 8bar PW-898 2,3 2,7 3,05 3,4,5,8 2,5 2,4 PW-899 2,3 2,7 3,05 3,4,5,8 2,5 2,4 PW-833 2,45 2,75 3,05 3,4,4,7 2,,0 2,35 PW-822 3,05 3,4 3,7 4,05,75 2, 2,4 2,8 ombined speed controllers & blockers Pilot operating pressure Depilot operating pressure 2bar 4bar 6bar 8bar 2bar 4bar 6bar 8bar PWR-H448 2,3 2,7 3,05 3,4,5,8 2,5 2,4 PWR-H468 2,3 2,7 3,05 3,4,5,8 2,5 2,4 PWR-H469 2,3 2,7 3,05 3,4,5,8 2,5 2,4 PWR-H489 2,3 2,7 3,05 3,4,5,8 2,5 2,4 PWR-H483 2,45 2,75 3,05 3,4,4,7 2,0 2,35 PWR-H493 2,45 2,75 3,05 3,4,4,7 2,0 2,35 locker with push-in connection - dimensions H Ø D K Order Ø D H K code PW-468 22 2 24 59 9,5 39 PW-469 22 2 24 53 3,5 39 PW-489 22 2 24 53 3,5 39 PW-483 27 28 24 53 4,0 50 PW-493 27 28 24 53 4,0 50 PW-42 3 33 30 66 24,0 66 locker with threaded connection - dimenesions H D Ø K D Order Ø D H K code PW-898 22 2 24 59 9,5 43,5 PW-899 22 2 24 53 3,5 43,5 PW-833 27 28 24 53 4,0 55,5 PW-822 3 33 30 66 24,0 63,0 locker/flow regulator - dimensions Order Ø D H K P code H P K Ø PWR-H448 22,5 2 24 59 9,5 47,0 2,5 PWR-H468 22,5 2 24 59 9,5 47,0 2,5 PWR-H469 22,5 2 24 53 3,5 47,0 2,5 PWR-H489 22,5 2 24 53 3,5 47,5 2,5 PWR-H483 29,0 28 24 53 5,5 60,0 5,0 PWR-H493 29,0 28 24 53 5,5 60,0 5,0 D Pneumatic 2.5

Unloader and Unloader/Flow Regulator PWE/PWR-HE For direct cylinder mounting Unloader only or multifunction options Threaded or push-in ports Unloader/Flow Regulator device adjustable with manual barrel Wide range of sizes Operating information Operating pressure: Permissible fluids: Flow: Operating temperature: Storage temperature: No. of operations with dry air at 6 bar 20 O Hz: aximum operating freqency: Vibration resistance: aximum connecting torque: ody material (Unloader): ody material (Unloader/Flow Regulator): onnection thread: djustment mode (Unloader/Flow Regulator): djustment locking (Unloader/Flow Regulator): to 0 bar ir or neutral gas 50micron or filtration, lubricated or not See table below -5 O to +60 O -40 O to +70 O million Hz onforming to section 9-2 of ureau Veritas regulations /8 = 8Nm ; /4 = 2Nm; 3/8 = 30Nm; /2 = 35Nm Zinc alloy Thermo plastic rass Rotating barrel Knurled lock nut Unloader with Push-in onnection Symbol onnection Thread onnection for Qmax input Weight Order for pilot port tube,ømm at 6 bar, l/min* kg code Push-in Ø4mm G/8 6 450 0,3 PWE-468 G/4 8 2800 0,5 PWE-489 G3/8 0 3950 0,8 PWE-493 G/2 2 4750 0,50 PWE-42 Unloader with Threaded onnection Symbol onnection Thread onnection for Qmax input Weight Order for pilot port tube,ømm at 6 bar, l/min* kg code Push-in Ø4mm G/8 G/4 450 0,3 PWE-898 G/4 G/4 2800 0,6 PWE-899 G3/8 G3/8 3950 0,9 PWE-833 G/2 G/2 4750 0,48 PWE-822 ombined Unloader/Flow ontrol with Push-in onnection Symbol arrel adjustment and locknut onnection Thread onnection for Qmax input Weight Order for pilot port tube,ømm at 6 bar, l/min* kg code Push-in Ø4mm G/8 4 450 0,0 PWR-HE448 G/8 6 450 0,0 PWR-HE468 G/4 6 2800 0,0 PWR-HE469 G/4 8 2800 0,0 PWR-HE489 G3/8 8 3950 0,8 PWR-HE483 G3/8 0 3950 0,8 PWR-HE493 Pneumatic 2.6

Unloader and Unloader/Flow Regulator PWE/PWR-HE Unloaders Pilot Depilot operating pressure operating pressure 3bar 6bar 8bar 3bar 6bar 8bar PWE-468/898,75 3,35 4,5 0,95 2,05 2,75 PWE-489/899 2,35 4,3 5,9 0,95 2,05 2,75 PWE-493/833 2,0 4, 4,8 0,90 2,0 3,0 PWE-42/822,4 3,35 5,0 0,90 2,2 3,5 ombined speed controllers & unloaders Pilot operating pressure Depilot operating pressure 3bar 6bar 8bar 3bar 6bar 8bar PWR-HE448,75 3,35 4,5 0,95 2,05 2,75 PWR-HE468,75 3,35 4,5 0,95 2,05 2,75 PWR-HE469 2,35 4,3 5,9 0,95 2,05 2,75 PWR-HE489 2,35 4,3 5,9 0,95 2,05 2,75 PWR-HE483 2,0 4, 4,8 0,90 2,0 3,0 PWR-HE493 2,0 4, 4,8 0,90 2,0 3,0 Unloaders - Dimensions D Ø Push-in onnection H K Order Ø D H K code PWE-468 22 2 24 54 3 39 PWE-489 22 2 24 54 3 39 PWE-493 27 28 24 62 6 50 PWE-42 3 33 30 73 24 66 H Ø D K D Threaded onnection Order Ø D H K 2 code 2 PWE-898 22 2 24 54 3 43 PWE-899 22 2 24 54 3 43 PWE-833 27 28 24 62 6 55 PWE-822 3 33 30 73 24 63 Unloaders/Flow Regulators - Dimensions Order Ø D H K P code H P K Ø PWR-HE448 22,5 2 24 59 9,5 47,0 2,5 PWR-HE468 22,5 2 24 59 9,5 47,0 2,5 PWR-HE469 22,5 2 24 53 3,5 47,0 2,5 PWR-HE489 22,5 2 24 53 3,5 47,5 2,5 PWR-HE483 29,0 28 24 53 5,5 60,0 5,0 PWR-HE493 29,0 28 24 53 5,5 60,0 5,0 D Pneumatic 2.7

Quick exhaust valves P4Q Increases piston speeds, super sensitive diaphragm Extremely low operating differential Virtually stiction free ay be used as differential shuttle valve High temperature option Operating information Operating pressure: 0,2 to 0 bar Operating temperature (Standard): -0 O to +80 O Operating temperature (High): -0 O to +80 O ody material: luminium Diaphragm material (Standard): Nitrile Diaphragm material (High): Viton Symbol Standard version Port v Weight Order Size Rating kg ode G/4 2,3 0,20 P4Q-2 G3/8 3,6 0,8 P4Q-3 G/2 6,6 0,50 P4Q-4 G3/4 7,3 0,44 P4Q-6 High temperature version Port v Weight Order Size Rating kg ode G/4 2,3 0,20 P4Q-V2 G3/8 3,6 0,8 P4Q-V3 G/2 6,6 0,50 P4Q-V4 G3/4 7,3 0,44 P4Q-V6 Quick Exhaust Valves - Dimensions Order Port code Size P4Q-*2 G/4 52 25 62 P4Q-*3 G3/8 52 25 62 P4Q-*4 G/2 73 38 86 P4Q-*6 G3/4 73 38 86 Pneumatic 2.8

Shuttle Valves llows two separate signals to be applied to the air pilot 0,6 bar differential, Viton seals as standard Operating information Operating pressure: Flow: Operating temperature: ody material 5 and G/8: ody material G/4 Shuttle ball material:,3 to 7 bar See table below -0 O to +60 O luminium Zinc Plastic Symbol Port Qmax input Weight Order Size at 6 bar, l/min* kg ode 5 36 0,040 33005 G/8 509 0,00 43005 G/4 076 0,72 53005 Shuttle Valves - Dimensions Order Port D E F G H code Size P D 33005 5 27,5 24 5 6,0 5 6 6,3 3,2 43005 G/8 44,0 24 5 6,0 25 6 9,5 4,5 53005 G/4 52,0 30 22 20,5 35 0 8,5 5,5 G E H Pneumatic 2.9

ack Pressure Sensor - odular PWS Detects stoppage of a cylinder due to a pressure drop in the exhaust chamber For direct mounting to cylinders hoice of pneumatic, electrical or electronic output Wide range of sizes Operating information Operating pressure: 0 to 0 bar Permissible fluids: ir or neutral gas 50micron or filtration, lubricated or not Operating temperature: -5 O to +60 O Storage temperature: -40 O to +70 O No. of operations with dry air at 6 bar 20 O Hz: 0 million aximum operating frequency: 0 Hz Output characteristics: Pneumatic: Flow @ 6 bar 90l/m Electrical: /contact 2,5/250V, 5W 48V D Electronic: PNP N/ or N/O 0 to 30V 75 m D aximum connecting torque: 5 = Nm; /8 = 8Nm; /4 = 2Nm; 3/8 = 30Nm; /2 = 35Nm ody material: Thermo plastic Dimensions and piloting onnection thread: rass pressures opposite page ssembly onnection ll back pressure sensors are a combination of two distinct parts: a banjo socket + a plug-in sensor. llen screw anjo socket Plug-in sensor Output signal connection K U N Pneumatic output sensor: Ø4 mm push-in ocking clip Ø4 mm push-in connection lack (K) lue (U) rown (N) lack (K) rown (N) lue (U) Electric output sensor Solid state output sensor - load 2K + -3 U + N anjo Sockets Thread Size for Female Tool Required Weight Order code ylinder Port Thread Kg 5 5 8mm flat spanner 0,04 PWS-55 G/8 G/8 5mm llen key 0,04 PWS-88 G/4 G/4 8mm llen key 0,05 PWS-99 G3/8 G3/8 0mm llen key 0,07 PWS-33 G/2 G/2 2mm llen key 0, PWS-22 Plug-in Sensors Sensing Output Output Output Weight Order function function onnection characteristics kg code Exhaust back Pneumatic Push-in NO valve flow rate 0,09 PWS-P pressure decay Ø4mm at 6 bar,5 l/s Electrical 3 wires O contact 0,08 PWS-02 ~Ve = 3 0,5mm 2 2 to 230V ~ / 0V* length 2m 2 to 48 VD/5W* Solid state 3 wires PNP type N 0,07 PWS-E0 0,mm 2 0/30VD** length 2m 75 m, NO 0,07 PWS-E * Suitable for low currents : 250 V ~ / 4 m ; 24 VD / 0 m ** Including ripple Pneumatic 2.20

ack Pressure Sensor - ono block PWS Detects stoppage of a cylinder due to a pressure drop in the exhaust chamber Single unit design For direct mounting to cylinders Pneumatic output Wide range of sizes Operating information Operating pressure: Permissible fluids: Operating temperature: Storage temperature: No. of operations with dry air at 6 bar 20 O Hz: aximum operating frequency: Output characteristics: aximum connecting torque: ody material: onnection thread: 0 to 0 bar ir or neutral gas 50micron or filtration, lubricated or not -5 O to +70 O -20 O to +70 O 0 million Hz Flow @ 6 bar 90l/m 5 = Nm; /8 = 8Nm; /4 = 2Nm; 3/8 = 30Nm; /2 = 35Nm Zinc alloy / Thermo plastic rass ack Pressure Sensor for ylinder ounting Symbol & Thread Thread ore Weight Order code ylinder Port Supply Port Ømm Kg 5 5 2 0,0 PWS-545 G/8 G/8 5 0, PWS-548 G/4 G/4 7 0,0 PWS-549 G3/8 G3/8 0 0,7 PWS-543 G/2 G/2 4 0,5 PWS-542 ack Pressure Sensors - ono block - Dimensions Ø Order Ø H code H /2 Ø4 PWS-S45 9,0 6,0 42 PWS-S48 22 6,5 29,0 40 PWS-S49 22 23,5 26,0 43 PWS-S43 22 23,5 36,5 43 PWS-S42 22 32,0 29,5 48 Plug-in & onoblock back pressure sensors Pilot operating pressure ack Pressure Sensors - odular - Dimensions Depilot operating pressure 6bar 6bar PWS-P 4,4 0,4 PWS-02,0 0,6 PWS-E0 & E 0,7 0,5 PWS-,6 ±0,2 0,3 H /2 K 24,5 8,5 32 2m Ø6 22 20 32 8 X 4 2m Order H K code PWS-55 8 6,5 0 7 PWS-88 5 6 20,0 0 20 PWS-99 8 2 20,0 0 22 PWS-33 0 28 22,0 2 25 PWS-22 2 33 26,0 4 26 Pneumatic 2.2

Optimisers PWP djusts the actuating force developed by a cylinder For direct mounting to power valve Threaded or push-in ports djustment by allen key or knurled knob Wide range of sizes Operating information Operating pressure: Permissible fluids: Flow: Operating temperature: Storage temperature: aximum connecting torque: ody material: onnection thread: djustment mode: to 8 bar ir or neutral gas 50micron or filtration, lubricated or not See table below -5 O to +70 O -20 O to +70 O /8 = 8Nm ; /4 = 2Nm; 3/8 = 30Nm Zinc alloy rass llen key With Push-in onnection Symbol With setting indicator* With Threaded onnection Thread size for Push-in Qmax input Weight Order cylinder port onnection, Ømm at 6 bar, l/min* kg code G/8 6 570 0,30 PWP-268 G/4 6 530 0,30 PWP-269 G/4 8 870 0,30 PWP-289 G/4 0 400 0,54 PWP-299 G3/8 0 530 0,55 PWP-293 * djustment is carried out using a 6mm llen key or a knurled knob. Symbol With setting indicator* Thread size for Push-in Qmax input Weight Order cylinder port onnection, Ømm at 6 bar, l/min* kg code G/8 G/8 570 0,34 PWP-888 G/4 G/4 870 0,34 PWP-899 G3/8 G3/8 3200 0,62 PWP-833 * djustment is carried out using a 6mm llen key or a knurled knob. lip-in knurled adjustment knob for optimisers Weight kg Order code 0,03 PWP-Z3 Dimensions H 6 /2 D Ø K H 6 /2 D 2 Ø K D Order Ø D H K 2 code PWP-268 22 2 9 58,0 3,5 39 PWP-269 22 2 9 58,0 3,5 39 PWP-289 22 2 9 58,0 3,5 39 PWP-299 27 28 9 65,5 6,5 50 PWP-293 27 28 27 65,5 6,5 50 PWP-888 22 2 9 58,0 3,5 43 PWP-899 22 2 9 58,0 3,5 43 PWP-833 27 28 27 65,5 6,5 55 Pneumatic 2.22

Soft Start PWD Enables a gradual increase in pressure For direct mounting to power valve Instant push-in connections djustment by allen key Operating information Operating pressure: Permissible fluids: Flow: Operating temperature: Storage temperature: No. of operations with dry air at 6 bar 20 O Hz: aximum operating frequency: aximum connecting torque: ody material: onnection thread: djustment mode: 3 to 0 bar ir or neutral gas 50micron or filtration, lubricated or not See table below -5 O to +70 O -20 O to +70 O /4 : 0 million; 3/8 : 5 million Hz /4 = 2Nm; 3/8 = 30Nm Thermo plastic rass llen key With Push-in onnection Symbol Thread Push-in Flow rate at Weight Order onnection, Ømm 6 bar, l/min kg code G/4 8 500 0,07 PWD-P2489 G/4 8 2000 0,2 PWD-P2499 G3/8 0 2000 0,3 PWD-P2493 Dimensions Ø D Order Ø Ø D H K code maxi H K PWD-P2489 5,0 20 G/4 7 6 8,5 27,5 PWD-P2499 9,5 25 G/4 22 62,8 4,0 PWD-P2493 9,5 25 G3/8 22 62,8 4,0 /2 Operation Soft starter provides a progressive increase in pressure, in a section of a pneumatic system. When pressure reaches half the supply pressure, full pressure is applied automatically. Supply pressure P ~ 0,5 P djustment llen key adjustment of flow rate for slow pressure increase. llen key Flat spanner Supply pressure ounting These compact devices with push-in tube connection are fitted to the N port of the power valve. Soft Starter With Soft Starter Operating pressure djustable T Time Pneumatic 2.23

Non return valve - ale thread 3047 Rugged brass body design Standard or high temperature options ow 0, bar operating pressure Full flow in one direction only ompact design Operating information Operating pressure: Flow: Operating temperature: ody material: Seal material 0, to 7 bar Qmax at 6 bar, l/min* /8 = 200/m; /4-350 /m Standard: -26 O to +85 O High: -26 O to +230 O rass Standard: Nitrile High: Viton Standard version Symbol Thread size Weight Order kg code G/8 0,68 3047X G/4 0,72 3047 High temperature version Symbol Thread size Weight Order kg code G/8 0,68 3047XV G/4 0,72 3047V Dimensions Order Port code Size 3047X/XV G/8 5 2 3047/V G/4 49 2 Pneumatic 2.24

Non return valve - Female V luminium bodies ong life ow opening pressure Full flow in one direction only Operating information Operating pressure: Operating temperature: ody material: Seal material 0, to 0 bar -20 O to +70 O nodised aluminium Nitrile V - luminium Symbol Port size Weight Order kg code G/8 0,0 V2-Q-NQ-5 G/4 0,0 V22-Q-NQ-5 G/2 0,05 V42-Q-NQ-5 Dimensions N F Order F N code V2-Q-NQ-5 G/8 3 4 VQ22-Q-NQ-5 G/4 40 7 V42-Q-NQ-5 G/2 59 27 Pneumatic 2.25

Non Return Valve - Push-in PW ow 0, bar operating pressure Full flow in one direction only ompact design Instant push-in connections Operating information Operating pressure: Flow: Operating temperature: Storage temperature ody material: 0,2 to 0 bar See below -5 O to +70 O -20 O to +70 O Thermo plastic ine ounted Non-return Valves Sold in lots of 0 Symbol Push-in Flow Rate at Weight Order code onnection Ømm 6 bar, l/s Kg 4 200 0,0 PW-444 6 660 0,02 PW-446 8 600 0,02 PW-448 Dimensions ØH Order ØH code PW-444,0 43,0 PW-466 3,0 49,5 PW-488 3,5 55,0 Pneumatic 2.26

Terminal lock Sub-bases PZ- For the remote mounting of cylinder control accessories Suitable for use with - Flow regulators - lockers - Unloaders - ombined devices - Optimisers - Soft start Operating information Operating pressure: Flow: Operating temperature: Storage temperature ody material: 0,2 to 0 bar See below -5 O to +70 O -20 O to +70 O Thermo plastic Terminal lock Subbases for ylinder ontrols* For ounting Other Push-in ore Weight Order code ylinder ontrols onnection Ømm Ømm Kg G/8 6 4 0,05 PZ-2268 G/4 8 6 0,05 PZ-2289 * For remote mounting of all cylinder controls, when mounting on power valves or cylinders is impractical. The subbase is designed for mounting two components side by side. Dimensions = 3 = Test point 5,5 3 9 9 8,5 48 = = 60 8,5 27 35,5 Pneumatic 2.27

Pneumatic 2.28

Pneumatic Flexible Tubing

Thermoplastic Single Tubes and Pneumo-Tube undles Index Page Thermoplastic Single Tubes and Pneumo-Tube undles 3.3 Polyamide tubing 3.4-3.6 Polyurethane tubing 3.7-3.9 ccessories 3.0 Pneumatic 3.2

Thermoplastic Single Tubes and Pneumo-Tube undles Principle ll Parker tubes are manufactured to International standards and are fully compatible with Parker's wide range of push-in, compression and screw type tube fittings, for example Parflex thermoplastic fittings such as Fast & Tite, True Seal T, Par-ard and ini-arb as well as components from the Parker Pneumatics anual. Standard packaging of all Parker single tube products is polyethylene bags. Dispensing cardboard boxes (K) are available on request. pplications Pneumatics Paint Systems ubrication Systems utomation Systems Process ontrol ines edical pplications Instrumentation and ontrol Food and everage pplications Robotics Systems Fluid pplications Pressurised ir Tools Pneumatic 3.3

Nylon Tube Parker calibrated nylon tubing Parker calibrated nylon tubing is extruded in polyamide (P/2) for use with pneumatic fittings. This is manufactured within the limits of DIN 73378, S 5409 PT and ETOP RP54 P recommendations, and is ideal for pneumatic applications. For continuous use at high temperature we recommend tube which is protected against heat and light. dvantages - Good vibration/damping properties, - High abrasion resistance - Tubing available in several colours for easy - ow pressure drop, identification - No thermal expansion Technical Features Working pressure (bar) O -40-20 0 20 30 40 50 60 70 80 90 00 Tube size 3 x 0.60 27 27 27 27 23 20 8 6 4 3 2 4 x 0.65 2 2 2 2 8 5 4 2 0 9 8 4 x 39 39 39 39 32 28 25 22 20 8 7 5 x 29 29 29 29 24 2 9 7 5 4 3 0 6 x 24 24 24 24 20 7 5 3 2 0 8 8 x 7 7 7 7 4 2 0 9 8 8 6 0 x 3 3 3 3 0 9 8 7 6 6 5 0 x.25 8 8 8 8 5 3 0 9 8 8 6 0 x.5 22 22 22 22 8 6 4 3 0 0 8 2 x 9 8 7 6 6 5 5 4 4 x.5 5 5 5 5 2 0 9 9 7 7 5 6 x.5 3 3 3 3 9 8 7 7 6 6 5 urst pressure (bar) O -40-20 0 20 30 40 50 60 70 80 90 00 Tube size 3 x 0.60 8 8 8 8 69 60 54 48 42 39 36 33 4 x 0.65 64 64 64 64 53 46 4 37 33 30 28 23 4 x 6 6 6 6 96 83 74 66 60 5 5 42 5 x 87 87 87 87 72 63 56 50 45 4 38 3 6 x 7 7 7 7 59 5 45 40 37 33 3 25 8 x 52 52 52 52 43 37 33 29 27 24 23 9 0 x 40 40 40 40 33 29 26 23 2 9 8 5 0 x.25 53 53 53 53 44 38 34 30 27 25 23 9 2 x 33 33 33 33 27 24 2 9 7 6 5 2 4 x.5 45 45 45 46 37 32 29 26 23 2 20 6 6 x.5 39 39 39 39 32 28 25 22 20 8 7 4 Working pressure of nylon tubing is dependant on the operating temperature. Working pressures shown are based on a design factor of 3: Pneumatic 3.4

Nylon Tube Parker calibrated nylon tubing Tube bend radius To ensure the correct functioning of both tube fitting and pneumatic system it is important not to exceed the minimum bend radius of the tube. Tube outside diameter tolerances Tube size inimum bend radius (mm) Tube OD Tolerance (mm) 3 x 0.60 5 4 x 0.65 20 4 x 20 5 x 35 6 x 35 8 x 45 0 x.25 60 0 x 60 2 x 70 4 x.50 85 6 x.50 95 3 to 5mm + 0.05-0.08 6 to 6mm +0.05-0.0 hemical compatibility Parker nylon tubing is suitable for use with a wide variety of fluids. The table below shows typical fluids used with nylon tubin Fluid Working temperature -20 O +20 O +60 O utting oil utting fluids Water Hydraulic oils ineral oils / greases arbon dioxide cetone Gasoline Trichloroethylene - = excellent, = medium, = poor For other fluids please contact us Pneumatic 3.5

Nylon Tube Nylon tubes, 25m and 00m Tube Outside Wall olour Order code Order code Size Ømm Thickness 25 m length 00 m length 3x,7 3 0,6 lear P6T-NW03060-025 P6T-NW03060-00 3x,7 3 0,6 lue P6T-N03060-025 P6T-N03060-00 3x,7 3 0,6 lack P6T-N03060-025 P6T-N03060-00 3x,7 3 0,6 Yellow P6T-NY03060-025 P6T-NY03060-00 3x,7 3 0,6 Red P6T-NR03060-025 P6T-NR03060-00 3x,7 3 0,6 Green P6T-NG03060-025 P6T-NG03060-00 4x2 4,00 lear P6T-NW0400-025 P6T-NW0400-00 4x2 4,00 lue P6T-N0400-025 P6T-N0400-00 4x2 4,00 lack P6T-N0400-025 P6T-N0400-00 4x2 4,00 Yellow P6T-NY0400-025 P6T-NY0400-00 4x2 4,00 Red P6T-NR0400-025 P6T-NR0400-00 4x2 4,00 Green P6T-NG0400-025 P6T-NG0400-00 4x2,7 4 0,65 lear P6T-NW04065-025 P6T-NW04065-00 4x2,7 4 0,65 lue P6T-N04065-025 P6T-N04065-00 4x2,7 4 0,65 lack P6T-N04065-025 P6T-N04065-00 4x2,7 4 0,65 Yellow P6T-NY04065-025 P6T-NY04065-00 4x2,7 4 0,65 Red P6T-NR04065-025 P6T-NR04065-00 4x2,7 4 0,65 Green P6T-NG04065-025 P6T-NG04065-00 5x3 5,00 lue P6T-N0500-025 P6T-N0500-00 6x4 6,00 lear P6T-NW0600-025 P6T-NW0600-00 6x4 6,00 lue P6T-N0600-025 P6T-N0600-00 6x4 6,00 lack P6T-N0600-025 P6T-N0600-00 6x4 6,00 Yellow P6T-NY0600-025 P6T-NY0600-00 6x4 6,00 Red P6T-NR0600-025 P6T-NR0600-00 6x4 6,00 Green P6T-NG0600-025 P6T-NG0600-00 8x6 8,00 lear P6T-NW0800-025 P6T-NW0800-00 8x6 8,00 lue P6T-N0800-025 P6T-N0800-00 8x6 8,00 lack P6T-N0800-025 P6T-N0800-00 8x6 8,00 Yellow P6T-NY0800-025 P6T-NY0800-00 8x6 8,00 Red P6T-NR0800-025 P6T-NR0800-00 8x6 8,00 Green P6T-NG0800-025 P6T-NG0800-00 0x8 0,00 lear P6T-NW000-025 P6T-NW000-00 0x8 0,00 lue P6T-N000-025 P6T-N000-00 0x8 0,00 lack P6T-N000-025 P6T-N000-00 0x8 0,00 Yellow P6T-NY000-025 P6T-NY000-00 0x8 0,00 Red P6T-NR000-025 P6T-NR000-00 0x8 0,00 Green P6T-NG000-025 P6T-NG000-00 0x8 0,00 Grey P6T-ND000-025 P6T-ND000-00 2x0 2,00 lear P6T-NW200-025 P6T-NW200-00 2x0 2,00 lue P6T-N200-025 P6T-N200-00 2x0 2,00 lack P6T-N200-025 P6T-N200-00 2x0 2,00 Yellow P6T-NY200-025 P6T-NY200-00 2x0 2,00 Red P6T-NR200-025 P6T-NR200-00 2x0 2,00 Green P6T-NG200-025 P6T-NG200-00 4x 4,50 lear P6T-NW450-025 P6T-NW450-00 4x 4,50 lue P6T-N450-025 P6T-N450-00 4x 4,50 lack P6T-N450-025 P6T-N450-00 ultitube - nylon tube - PV sheath, 25m and 00m Number of Tube Sheath in bend Order code tubes Size colour radii 20 00 m length 3 4x2,7 lack P6T-04N03-00 5 4x2,7 lack P6T-04N05-00 7 4x2,7 lack P6T-04N07-00 2 4x2,7 lack P6T-04N2-00 9 4x2,7 lack P6T-04N9-00 3 6x4 lack 40 P6T-06N03-00 5 6x4 lack 05 P6T-06N05-00 7 6x4 lack 5 P6T-06N07-00 2 6x4 lack 50 P6T-06N2-00 9 6x4 lack 60 P6T-06N9-00 Pneumatic 3.6

Polyurethane Tube Parker calibrated polyurethane tubing Parker calibrated polyurethane tubing is obtained by extrusion. The material hardness is 95 Shore (slightly higher than 40 Shore D). Its very high flexibility allows a small minimum bend radius for compact installations. dimensional inspection system based on advanced laser technology maintains a tight tolerance on the outside tube diameter. dvantages - Extreme flexibility with bend radii up to three times - Good vibration resistance, better than polyamide tubing allows compact installations - ight weight, - Tube available in several colours for line identification. - Reduced fitting time. Technical Features Working pressure (bar) O -40-20 0 20 30 40 50 60 70 80 Tube size 3 x 0.5 0 0 0 0 8 7 6 6 5 5 4 x 0.75 9 8 7 6 6 5 5 x 2 2 2 2 0 9 8 7 6 6 6 x 0 0 0 0 8 7 6 6 5 5 8 x.25 9 9 9 9 8 7 6 6 5 5 0 x.5 9 9 9 9 7 6 6 5 5 4 2 x 2 0 0 0 0 8 7 6 6 5 5 urst pressure (bar) O -40-20 0 20 30 40 50 60 70 80 Tube size 3 x 0.5 30 30 30 30 24 22 9 7 5 4 4 x 0.75 33 33 33 33 27 24 2 9 7 5 5 x 37 37 37 37 30 26 23 2 9 7 6 x 30 30 30 30 24 2 9 7 5 4 8 x.25 28 28 28 28 23 20 8 6 4 3 0 x.5 26 26 26 26 22 9 7 5 4 2 2 x 2 30 30 30 30 25 22 9 7 6 4 Working pressure of polyurethane tubing is dependant on the operating temperature. Working pressures shown are based on a design factor of 3: Pneumatic 3.7

Polyurethane Tube Parker calibrated polyurethane tubing Tube bend radius To ensure the correct functioning of both tube fitting and pneumatic system it is important not to exceed the minimum bend radius of the tube. Polyurethane tubing outside diameter tolerances Tube size inimum bend radius (mm) Tube OD Tolerance (mm) 3 x 0.5 3 4 x 0.75 7 5 x 22 6 x 27 8 x.25 37 0 x.50 54 2 x 2 62 3 to 8mm ±0. 0 to 2mm ±0.5 hemical compatibility Parker polyurethane tubing is suitable for use with a wide variety of fluids. The table below shows typical fluids used with polyurethane tubin Fluid Working temperature -20 O +20 O +60 O utting oil utting fluids Water Hydraulic oils ineral oils / greases arbon dioxide Gasoline Trichloroethylene - cetone - = excellent, = medium, = poor For other fluids please contact us Pneumatic 3.8

Polyurethane Tube ain data for Polyurethane tubes, 25m and 00m Tube Outside Wall olour Order code Order code Size Ømm Thickness 25 m length 00 m length 3x2 3 0,5 lear P6T-PW0305-025 P6T-PW0305-00 3x2 3 0,5 lue P6T-P0305-025 P6T-P0305-00 3x2 3 0,5 lack P6T-P0305-025 P6T-P0305-00 4x2,5 4 0,75 lear P6T-PW04075-025 P6T-PW04075-00 4x2,5 4 0,75 lue P6T-P04075-025 P6T-P04075-00 4x2,5 4 0,75 lack P6T-P04075-025 P6T-P04075-00 6x4,0 6,00 lear P6T-PW0600-025 P6T-PW0600-00 6x4,0 6,00 lue P6T-P0600-025 P6T-P0600-00 6x4,0 6,00 lack P6T-P0600-025 P6T-P0600-00 8x5,5 8,25 lear P6T-PW0825-025 P6T-PW0825-00 8x5,5 8,25 lue P6T-P0825-025 P6T-P0825-00 8x5,5 8,25 lack P6T-P0825-025 P6T-P0825-00 0x7,0 0,50 lear P6T-PW050-025 P6T-PW050-00 0x7,0 0,50 lue P6T-P050-025 P6T-P050-00 0x7,0 0,50 lack P6T-P050-025 P6T-P050-00 2x8,0 2 2,00 lear P6T-PW2200-025 P6T-PW2200-00 2x8,0 2 2,00 lue P6T-P2200-025 P6T-P2200-00 2x8,0 2 2,00 lack P6T-P2200-025 P6T-P2200-00 4x9,5 4 2,25 lear P6T-PW4225-025 P6T-PW4225-00 4x9,5 4 2,25 lue P6T-P4225-025 P6T-P4225-00 4x9,5 4 2,25 lack P6T-P4225-025 P6T-P4225-00 Pneumatic 3.9

ccessories Tube cutter Weight Order code Kg 0,030 P6T- ain data for Spiral conduit for tube bundles Sold in rolls of 25m in ax length olour Weight Order code bundle bundle m Kg 0 mm 40 mm 25 Grey,000 PZT-X05 9 mm 00 mm 25 Grey,000 PZT-X20 Pneumatic 3.0

Pneumatic Exhaust Silencers

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback