PRODUCT CATALOG PLUG-IT PRODUCTS. - A Different Kind of Plug Company -

PRODUCT CATALOG PLUG-IT PRODUCTS - A Different Kind of Plug Company -

ALL PIPE PLUGS ARE NOT CREATED EQUAL! Some Facts to Compare When Selecting a Pipe Plug Inflation Pressure - A higher inflation pressure gives a better safety margin against back pressure. We feature some of the highest inflation pressures in the industry. Compare and see for yourself! Reinforcement - Some plugs are molded and have no reinforcement, but they are cheaper to buy. We use several materials for reinforcement such as polyester cord and DuPont Kevlar. While Kevlar does not make our bladders bullet-proof, we can use fewer layers of reinforcement with Kevlar as compared to polyester cord. This saves labor cost while constructing the bladder! Safety Relief Valves - Plug-It Products has featured Safety Relief Valves in some of our products for over 12 years Our Valves automatically reset to the proper pressure if the plug is over-inflated, so the contractor can continue using the plug The pressure relief valves help protect the plug from damage caused from over-inflation. Look for dealers who rent plugs with Safety Relief Valves! Don t buy a rental plug that fails because of the previous user! Versatility - Our 400 Series Multi-Size Flow Diverters with flanged ends offer many different options; diverting flow, for pumping, or bypassing inside of a structure Our 900, 910, 925, & 950 Series can be used as Joint Testers or Grout Packers Our Multi-Size Joint Testers give the most wall clearance between the bladder and pipe wall. Our Joint Testers will clear allowable deflection and most bends in pipe, ending the need to disassemble the tester inside the pipe Our 925 Series Collapsible Joint Testers can test a larger diameter pipe while slipping through a 24 manhole opening, so the cone does not have to be pulled Shop & Compare, the lowest price is not always the best deal! We want you to inflate our plugs, not blow them up! Safety Manual, Video, & CD Rom are available by contacting any of our locations on the back cover, or at www.plugitproducts.com

Table of Contents Custom Fabrication 3-4 Testing 900 Series: Multi-Size Joint Testers / Grout Packers - High Pressure 5 910 Series: Multi-Size Joint Testers / Grout Packers - Low Pressure 6 950 Series: Single-Size Joint Testers / Grout Packers - High Pressure 7 925 Series: Multi-Size Collapsible Joint Testers / Grout Packers - Low Pressure 8 1000 Series: Vacuum Test Equipment 9-10 Air Test Equipment 11 Flow Diversion 400 Series: Multi-Size Flow Diverters 12-14 250 Series: Single-Size High-Flow Diverters 15-16 280 Series: Single-Size High-Flow / No-Flow Diverters 17 Rehabilitation AV Series: Root Control Applicators 18 140 Series: Nozzle Carriers 18 CLA Series: Lateral Carriers 18 CA Series: Carriers 19-20 450 & 460 Series: Steam Process Plugs 21 402 Series: Double Bladder Multi-Size Flow Diverters 22 Pneumatic Plugs 600/650 Series: Multi-Size Back Plugs / Leak Locators 23-26 605/655 Series: Multi-Size Back Plugs / Leak Locators with Larger Bypass 27 500 Series: Multi-Size Plugs with Seal Ribs 28 601 & 401 Series: Protective Sleeves for Large Plugs 29 700 Series: Multi-Size Washballs 30 800/825/850 Series: High-Pressure Plugs 31-32 100 & 200 Series: Pneumatic Single-Size Plugs 33 300 & 310 Series: Disc Plugs 34 WE Series: Cleanout & Lateral Plugs 35 Mechanical Plugs NP Series: Non-Pressure Plugs 36 HT Series: Plastic Mechanical Pipe Plugs 37 ME Series: Aluminum Mechanical Pipe Plugs 38 Related Underground Equipment Gas Monitors 39 Ventilation Blowers 40 Confined Space Entry 41 Lasers 42 Magnetic Locators 43 Saw Blades 43 Pipe Creepers & Mud Carts 44 Deflection Gauges Deflection Gauges & Proving Rings 45 Ropes, Hoses & Accessories Inflation Ropes/Hoses 46 Parts & Accessories 47 Notice to Employers, Contractors & Users 48 & Conversions 49

Custom Fabrication Just a few of the custom products Plug-It Products has designed & fabricated over the years! Custom 96 300 Series Disc Plug in use, braced for back pressure Standard 900 Series Multi-Size Joint Tester with Custom Hobas Deflection Gauge attached to front Custom 400 Series with 90 elbow & 3 Threaded Nipples Custom Slip Lining Packer 2) 66 Hydraulically Actuated Telescopic Flow Diverters used to dry up a structure in Denver, CO. Diverters are steered into place remotely with included hydraulic control panel 3

Custom Fabrication Give us a call for your custom design and fabrication needs! Telescopic Flow Diverters - 2) 250-30 s with Hydraulic Rams & Pump Cans. Shown in retracted position. Expands 36 Custom flexible, inflatable 24 Rubber Duct Custom 78 1000 Series Vacuum Plate with window 30 High Pressure Mechanical plug Designed to fit through a 24 Manhole Custom Vacuum Joint Tester. Uses vacuum to test welds on steel, mortar lined pipe Custom 310 Series Bulkhead with 3 inflatable sides. Shown with bracing 4

900 Series: Multi-Size Joint Testers / Grout Packers - High Pressure Example: 900-4854 Doubles as a Grout Packer Comes with Test Panel 24 Wide Bladder Heavy Duty, Adjustable Wheels All Steel Construction Patented Telescopic Ports DuPont Kevlar Reinforced Bladder Available in Higher Operating Pressures Successfully Tests T-Lock Pipe Several Inches of Clearance Between Bladder & Pipe Wall, Allowing Joint Tester to Negotiate bends in the Pipe & Clear Allowable Deflection Patent # 5066208 Available for Rent or Sale! Testing 900 Series: Multi-Size Joint Testers / Grout Packers - High Pressure MAX SIZE RANGE DIAMETER WIDTH PRESSURE MAX ALLOWABLE TEST PRESSURE 900-2430 600 mm-800 mm 533 mm 610 mm 10.3 bar 6.9 bar 2-30.0 21.0 2 100 psi 900-3036 750 mm-950 mm 686 mm 610 mm 10.3 bar 6.9 bar 30.0-3 27.0 2 100 psi 900-3642 900 mm-1100 mm 838 mm 610 mm 10.3 bar 6.9 bar 3-42.0 33.0 2 100 psi 900-4248 1050 mm-1250 mm 991 mm 610 mm 10.3 bar 6.9 bar 42.0-48.0 39.0 2 100 psi 900-4854 1200 mm-1400 mm 1143 mm 610 mm 10.3 bar 6.9 bar 48.0-5 45.0 2 100 psi 900-5460 1350 mm-1550 mm 1295 mm 610 mm 10.3 bar 6.9 bar 5-60.0 51.0 2 100 psi 900-6066 1500 mm-1700 mm 1448 mm 610 mm 10.3 bar 6.9 bar 60.0-6 57.0 2 100 psi 900-6672 1650 mm-1850 mm 1600 mm 610 mm 10.3 bar 6.9 bar 6-72.0 63.0 2 100 psi 900-7278 1800 mm-2000 mm 1753 mm 610 mm 10.3 bar 6.9 bar 72.0-78.0 69.0 2 100 psi 900-7884 1950 mm-2150 mm 1905 mm 610 mm 10.3 bar 6.9 bar 78.0-8 75.0 2 100 psi 900-8490 2100 mm-2300 mm 2057 mm 610 mm 10.3 bar 6.9 bar 8-90.0 81.0 2 100 psi 900-9096 2250 mm-2450 mm 2210 mm 610 mm 10.3 bar 6.9 bar 90.0-9 87.0 2 100 psi 900-96102 2400 mm-2600 mm 2362 mm 610 mm 10.3 bar 6.9 bar 9-102.0 93.0 2 100 psi 900-102108 102.0-108.0 2550 mm-2750 mm 99.0 2515 mm 2 610 mm 10.3 bar 100 psi 6.9 bar Custom Sizes Available! Call 800.575.8448 Water or Air Test Panel Part # 900-001 5

910 Series: Multi-Size Joint Testers / Grout Packers - Low Pressure Available for Rent or Sale! Example: 910-5460 Doubles as a Grout Packer Comes with Test Panel 24 Wide Bladder Heavy Duty, Adjustable Wheels Patented Telescopic Ports DuPont Kevlar Reinforced Bladder Successfully Tests T-Lock Pipe Several Inches of Clearance Between Bladder & Pipe Wall, Allowing Joint Tester to Negotiate bends in the Pipe & Clear Allowable Deflection Our 910A Series Aluminum Joint Testers include all of the above features, plus: Lighter Weight No Rust - Easier to Clean Up Perfect for Rental Example: 910A-4854 910 Series: Steel Multi-Size Joint Testers / Grout Packers - Low Pressure MAX SIZE RANGE DIAMETER WIDTH PRESSURE MAX ALLOWABLE TEST PRESSURE 910-2430 600 mm-800 mm 533 mm 610 mm 5.2 bar 1.7 bar 2-30.0 21.0 2 75 psi 910-3036 750 mm-950 mm 686 mm 610 mm 5.2 bar 1.7 bar 30.0-3 27.0 2 75 psi 910-3642 900 mm-1100 mm 838 mm 610 mm 5.2 bar 1.7 bar 3-42.0 33.0 2 75 psi 910-4248 1050 mm-1250 mm 991 mm 610 mm 5.2 bar 1.7 bar 42.0-48.0 39.0 2 75 psi 910-4854 1200 mm-1400 mm 1143 mm 610 mm 5.2 bar 1.7 bar 48.0-5 45.0 2 75 psi 910-5460 1350 mm-1550 mm 1295 mm 610 mm 5.2 bar 1.7 bar 5-60.0 51.0 2 75 psi 910-6066 1500 mm-1700 mm 1448 mm 610 mm 5.2 bar 1.7 bar 60.0-6 57.0 2 75 psi 910-6672 1650 mm-1850 mm 1600 mm 610 mm 5.2 bar 1.7 bar 6-72.0 63.0 2 75 psi 910-7278 1800 mm-2000 mm 1753 mm 610 mm 5.2 bar 1.7 bar 72.0-78.0 69.0 2 75 psi 910-7884 1950 mm-2150 mm 1905 mm 610 mm 5.2 bar 1.7 bar 78.0-8 75.0 2 75 psi 910-8490 2100 mm-2300 mm 2057 mm 610 mm 5.2 bar 1.7 bar 8-90.0 81.0 2 75 psi 910-9096 2250 mm-2450 mm 2210 mm 610 mm 5.2 bar 1.7 bar 90.0-9 87.0 2 75 psi 910-96102 2400 mm-2600 mm 2362 mm 610 mm 5.2 bar 1.7 bar 9-102.0 93.0 2 75 psi 910-102108 102.0-108.0 2550 mm-2750 mm 99.0 2515 mm 2 610 mm 75 psi 5.2 bar 1.7 bar Custom Sizes Available! Call 800.575.8448 910A Series: Aluminum Multi-Size Joint Testers / Grout Packers - Low Pressure MAX SIZE RANGE DIAMETER WIDTH PRESSURE MAX ALLOWABLE TEST PRESSURE 910A-2430 600 mm-800 mm 533 mm 610 mm 5.2 bar 1.7 bar 2-30.0 21.0 2 75 psi 910A-3036 750 mm-950 mm 686 mm 610 mm 5.2 bar 1.7 bar 30.0-3 27.0 2 75 psi 910A-3642 900 mm-1100 mm 838 mm 610 mm 5.2 bar 1.7 bar 3-42.0 33.0 2 75 psi 910A-4248 1050 mm-1250 mm 991 mm 610 mm 5.2 bar 1.7 bar 42.0-48.0 39.0 2 75 psi 910A-4854 1200 mm-1400 mm 1143 mm 610 mm 5.2 bar 1.7 bar 48.0-5 45.0 2 75 psi 910A-5460 1350 mm-1550 mm 1295 mm 610 mm 5.2 bar 1.7 bar 5-60.0 51.0 2 75 psi 910A-6066 1500 mm-1700 mm 1448 mm 610 mm 5.2 bar 1.7 bar 60.0-6 57.0 2 75 psi 910A-6672 1650 mm-1850 mm 1600 mm 610 mm 5.2 bar 1.7 bar 6-72.0 63.0 2 75 psi 910A-7278 1800 mm-2000 mm 1753 mm 610 mm 5.2 bar 1.7 bar 72.0-78.0 69.0 2 75 psi 910A-7884 1950 mm-2150 mm 1905 mm 610 mm 5.2 bar 1.7 bar 78.0-8 75.0 2 75 psi 910A-8490 2100 mm-2300 mm 2057 mm 610 mm 5.2 bar 1.7 bar 8-90.0 81.0 2 75 psi 910A-9096 2250 mm-2450 mm 2210 mm 610 mm 5.2 bar 1.7 bar 90.0-9 87.0 2 75 psi 910A-96102 2400 mm-2600 mm 2362 mm 610 mm 5.2 bar 1.7 bar 9-102.0 93.0 2 75 psi 910A-102108 102.0-108.0 2550 mm-2750 mm 99.0 2515 mm 2 610 mm 75 psi 5.2 bar 1.7 bar Custom Sizes Available! Call 800.575.8448 Patent # 5066208 Testing Water or Air Test Panel Part # 900-001 6

950 Series: Single-Size Joint Testers / Grout Packers - High Pressure Example: 950-54 Doubles as a Grout Packer Comes with Test Panel 18 Wide Bladder Heavy Duty, Adjustable Wheels All Steel Construction Patented Telescopic Ports DuPont Kevlar Reinforced Bladder Available in Higher Operating Pressures Several Inches of Clearance Between Bladder & Pipe Wall, Allowing Joint Tester to Negotiate bends in the Pipe & Clear Allowable Deflection Successfully Tests T-Lock Pipe Patent # 5066208 Available for Rent or Sale! Testing 950 Series: Single-Size Joint Testers / Grout Packers - High Pressure MAX SIZE RANGE DIAMETER WIDTH PRESSURE MAX ALLOWABLE TEST PRESSURE 900-24 600 mm 533 mm 457 mm 10.3 bar 6.9 bar 2 21.0 100 psi 900-27 700 mm 610 mm 457 mm 10.3 bar 6.9 bar 27.0 2 100 psi 900-30 750 mm 686 mm 457 mm 10.3 bar 6.9 bar 30.0 27.0 100 psi 900-33 850 mm 762 mm 457 mm 10.3 bar 6.9 bar 33.0 30.0 100 psi 900-36 900 mm 838 mm 457 mm 10.3 bar 6.9 bar 3 33.0 100 psi 900-39 1000 mm 914 mm 457 mm 10.3 bar 6.9 bar 39.0 3 100 psi 900-42 1050 mm 991 mm 457 mm 10.3 bar 6.9 bar 42.0 39.0 100 psi 900-45 1150 mm 1067 mm 457 mm 10.3 bar 6.9 bar 45.0 42.0 100 psi 900-48 1200 mm 1143 mm 457 mm 10.3 bar 6.9 bar 48.0 45.0 100 psi 900-54 1350 mm 1295 mm 457 mm 10.3 bar 6.9 bar 5 51.0 100 psi 900-60 1500 mm 1448 mm 457 mm 10.3 bar 6.9 bar 60.0 57.0 100 psi 900-66 1650 mm 1600 mm 457 mm 10.3 bar 6.9 bar 6 63.0 100 psi 900-72 1800 mm 1753 mm 457 mm 10.3 bar 6.9 bar 72.0 69.0 100 psi 900-78 1950 mm 1905 mm 457 mm 10.3 bar 6.9 bar 78.0 75.0 100 psi 900-84 2100 mm 2057 mm 457 mm 10.3 bar 6.9 bar 8 81.0 100 psi 900-90 2250 mm 2210 mm 457 mm 10.3 bar 6.9 bar 90.0 87.0 100 psi 900-96 9 2400 mm 93.0 2362 mm 457 mm 10.3 bar 100 psi 6.9 bar Custom Sizes Available! Call 800.575.8448 Water or Air Test Panel Part # 900-001 7

925 Series: Multi-Size Collapsible Joint Testers / Grout Packers - Low Pressure Example: 925-3642 (collapsed) 30 Thru 60 Pipe Compatible with Today s Non-Standard Pipe I.D. s Aluminum Construction Heavy Duty, Adjustable Wheels Comes with Air/Water Test Panel Patented Telescopic Ports Removable DuPont Kevlar Reinforced Bladder No Grout Band to Remove Successfully Tests T-Lock Pipe 0-25 PSI Test Pressure Patent # 5066208 Available for Rent or Sale! The 18 wide bladder width and collapsibility allow for insertion down a 24 manhole. Simply remove wheels & pull 2 pins to collapse Testing Example: 925-3642 925 Series: Multi-Size Collapsible Joint Testers / Grout Packers - Low Pressure MAX SIZE RANGE DIAMETER WIDTH PRESSURE MAX ALLOWABLE TEST PRESSURE 925-3036 750 mm-950 mm 686 mm 457 mm 3.5 bar 1.7 bar 30.0-3 27.0 50 psi 925-3642 900 mm-1100 mm 838 mm 457 mm 3.5 bar 1.7 bar 3-42.0 33.0 50 psi 925-4248 1050 mm-1250 mm 991 mm 457 mm 3.5 bar 1.7 bar 42.0-48.0 39.0 50 psi 925-4854 1200 mm-1400 mm 1143 mm 457 mm 3.5 bar 1.7 bar 48.0-5 45.0 50 psi 925-5460 5-60.0 1350 mm-1550 mm 51.0 1295 mm 457 mm 50 psi 3.5 bar 1.7 bar Custom Sizes Available! Call 800.575.8448 Water or Air Test Panel Part # 900-001 8

1000 Series: Vacuum Test Systems Lightweight All Aluminum Construction (not cast) Easy to Use Available with Optional Window Replaceable Foam Example: 1000-36 1000 Series: Vacuum Test Plate WITH WINDOW DIAMETER WEIGHT 1 10 lbs 1000-12 356 mm 4.5 kg 2 25 lbs 1000-24 1000-24W 660 mm 11.3 kg 38.0 42 lbs 1000-36 1000-36W 965 mm 19.1 kg 4 55 lbs 1000-42 1000-42W 1118 mm 24.9 kg Custom Sizes Available! Call 800.575.8448 Testing Example of our 1000-36 Vacuum Test Plate and our 1000-80 Venturi Vacuum Pump in use Example: 1000-2030 1000 Series: Vacuum Test Plugs WITH WINDOW 1000-1824 1000-1824W 1000-2030 1000-2030W 1000-2430 1000-2430W 1000-3036 1000-3036W SIZE RANGE 17.0-24.5 425 mm-650 mm 19.0-30.5 475 mm-800 mm 22.5-30.5 575 mm-800mm 28.5-36.5 725 mm-950 mm BLADDER HEIGHT 12.0 305 mm 457 mm 12.0 305 mm 12.0 305 mm REQUIRED PRESSURE Available for Rent or Sale! 9

1000 Series: Vacuum Test Systems Our Venturi Vacuum Pumps are lightweight and easy to use. They do not need oil, gas, or belts, and are very low maintenance. They feature more power, which means faster testing time. Test in seconds, not minutes! Example: 1000-80 Example: 1000-80L 1000 Series: Venturi Vacuum Pumps DESCRIPTION 1000-80 40 CFM 1000-80L 27 CFM 1000-80L-VH 27 CFM with 20 of 3/4 vacuum hose Example: 1000-80L-VH Testing Honda 5.5 HP OHV Motor No Belts - Motor to Pump 2-1 Reduction 1000 Series: Motorized Vacuum Pumps Wet Clutch Recoil Start 1000-500 CUBIC FEET PER MINUTE 25 CFM @ 15 in.hg. 1000-500-50 50 CFM @ 15 in.hg. Available for Rent or Sale! 10

Air Test Equipment Leak Location Reel 1100-300 Simple, Single Gauge & Valve Operation One Hose, Not Three. Air is Dumped in Front of Plugs, Not Run Back to the Panel, Making for Fast Deflation of Plugs & Space Plugs & Space Automatically Inflated with One Turn of the Control Knob, Making Operation Very Simple! Simple Operation Means Safer, Time Saving Leak Location Air Motor Driven Reel to Help Roll Out & Recover Hose Neatly Space Hose LENGTH 126-22 22 6.7 m Testing 3/8 Compressor Hose LENGTH 120-20 20 6.1 m 120-30 30 9.1 m 120-40 40 Custom Lengths Available! 3/4 Compressor Hose LENGTH 121-20 20 6.1 m 121-30 30 9.1 m 121-40 40 Custom Lengths Available! 1/4 Read Back Hose LENGTH 124-20 20 6.1 m 124-30 30 9.1 m 124-40 40 Custom Lengths Available! Ported PVC Test Caps SIZE 1100-2 2.0 51 mm 1100-3 3.0 76 mm 1100-4 102 mm 1100-6 152 mm Regulated Air Acceptance Test Panel 1100-150 Example: 1100-145-50 50 Triple Hose for Use with 1100-150 HOSES LENGTH 1100-145-25 3/8 x 3/8 x 1/4 25 7.6 m 1100-145-50 3/8 x 3/8 x 1/4 50 15.2 m 1100-150-25 3/4 x 3/8 x 1/4 25 7.6 m 1100-150-50 3/4 x 3/8 x 1/4 50 15.2 m Available for Rent or Sale! 11

400 Series: Multi-Size Flow Diverters Example: 400-812-4 Example: 400-1218-4 SIZE RANGE DIAMETER LENGTH -8.0 3.8 22.0 400-48-2 100 mm-200mm 97 mm 559 mm 400-610-3 400-812-3 400-812-4 400-1016-3 400-1016-4 400-1016-6 400-1218-4 400-1218-6 400-1218-8 400-1521-4 400-1521-6 400-1521-8 400-1521-10 400-1824-4 400-1824-6 400-1824-8 400-1824-10 5.5-10.5 150 mm-275 mm 7.0-12.5 175 mm-325 mm 9.0-1 225 mm-400 mm 10.5-275 mm-450 mm 1-21.0 350 mm-550 mm 16.5-2 425 mm-625 mm 5.5 140 mm 6.5 165 mm 8.5 216 mm 10.0 254 mm 13.5 343 mm 1 406 mm Durable, Rugged, Aluminum Construction Pump/Rental Industry Approved All Aluminum Body Inflation Port not in Rubber 2 Ply Polyester Reinforced Male NPT Threads PVC Cap Provided Through 6 Bypass Heavy Duty Bladder 40 PSI Inflation Pressure 1 Piece Forged Steel Eyelets Factory Repairable/Replaceable Bladder Offset Bypass 400 Series: Multi-Size Flow Diverters 22.0 559 mm 22.0 559 mm 22.0 559 mm 22.0 559 mm 2 610 mm 24.5 622 mm BYPASS SIZE 2.0 51 mm 3.0 76 mm 3.0 76 mm 102 mm 3.0 76 mm 102 mm 152 mm 102 mm 152 mm 8.0 203 mm 102 mm 152 mm 8.0 203 mm 10.0 254 mm 102 mm 152 mm 8.0 203 mm 10.0 254 mm WEIGHT 7.0 lbs 3.2 kg 13.0 lbs 5.9 kg 18.0 lbs 8.2 kg 26.0 lbs 11.8 kg 34.0 lbs 15.4 kg 46.0 lbs 20.9 kg 60.0 lbs 27.2 kg REQUIRED PRESSURE PIPE SIZE 100 mm 150 mm 8.0 200 mm 150 mm 8.0 200 mm 10.0 250 mm 8.0 200 mm 10.0 250 mm 12.0 300 mm 10.0 250 mm 12.0 300 mm 1 400 mm 12.0 300 mm 15.0 375 mm 450 mm 15.0 375 mm 450 mm 21.0 525 mm 450 mm 21.0 525 mm 2 600 mm 125 Series Safety Inflation Rope/Hose Page 46 MAX ALLOWABLE BACK PRESSURE AIR 10 psi 0.7 bar 10 psi 0.7 bar 10 psi 0.7 bar 10 psi 0.7 bar 10 psi 0.7 bar WATER 45 ft 13.7 m 45 ft 13.7 m 45 ft 13.7 m 45 ft 13.7 m 45 ft 13.7 m 30 ft 9.1 m 30 ft 9.1 m 30 ft 9.1 m Flow Diversion Available for Rent or Sale! 12

400 Series: Multi-Size Flow Diverters Example: 400-2436-F Available for Rent or Sale! Durable, Rugged Construction Pump/Rental Industry Approved All Aluminum Body 2 Ply Polyester Reinforced Heavy Duty Bladder 40 PSI Inflation Pressure Factory Repairable/Replaceable Bladder Flanged End Allows Easy Changing of Plates for Different Bypass Sizes or Setups Buy 1 Plug - Use Several Different Ways Flow Diversion 400 Series: Multi-Size Flow Diverters SIZE RANGE DIAMETER LENGTH WEIGHT 16.5-2 1 24.5 60.0 lbs 400-1824-F 425 mm-625mm 406 mm 622 mm 27.2 kg 400-1830-F 400-2436-F 400-3648-F 400-4860-F 16.5-30.0 425 mm-775 mm 22.0-3 550 mm-950 mm 3-48.0 850 mm-1250 mm 4-60.0 1150 mm-1550 mm 1 406 mm 21.5 546 mm 33.0 838 mm 45.0 1143 mm 41.0 1041 mm 41.0 1041 mm 41.0 1041 mm 41.0 1041 mm 95.0 lbs 43.1 kg 130.0 lbs 58.9 kg 215.0 lbs 97.5 kg 325.0 lbs 147.3 kg REQUIRED PRESSURE PIPE SIZE 450 mm 21.0 525 mm 2 600 mm 450 mm 2 600 mm 30.0 750 mm 2 600 mm 30.0 750 mm 3 900 mm 3 900 mm 42.0 1050 mm 48.0 1200 mm 48.0 1200 mm 5 1350 mm 60.0 1500 mm MAX ALLOWABLE BACK PRESSURE AIR 10 psi 0.7 bar 10 psi 0.7 bar 10 psi 0.7 bar 10 psi 0.7 bar 8 psi 0.6 bar 5 psi 0.3 bar 8 psi 0.6 bar 8 psi 0.6 bar 5 psi 0.3 bar WATER 30 ft 9.1 m 30 ft 9.1 m 30 ft 9.1 m 25 ft 7.6 m 25 ft 7.6 m 20 ft 6.1 m 20 ft 6.1 m 20 ft 6.1 m 15 ft 4.6 m 125 Series Safety Inflation Rope/Hose Page 46 13

400 Series: Multi-Size Flow Diverters 400 Series: Interchangeable Bolt-On Bypass Adapters/Plates BYPASS FOR USE WITH: SIZE THREADED SLIP FLANGED 102 mm 400-1830-4-1 400-1830-4-1S 400-1830-4-1F 400-1824-F or 152 mm 400-1830-6-1 400-1830-6-1S 400-1830-6-1F 400-1830-F 8.0 203 mm 400-1830-8-1 400-1830-8-1S 400-1830-8-1F 10.0 254 mm 400-1830-10-1 400-1830-10-1S 400-1830-10-1F 102 mm 400-2436-4-1 400-2436-4-1S 400-2436-4-1F 152 mm 400-2436-6-1 400-2436-6-1S 400-2436-6-1F 8.0 203 mm 400-2436-8-1 400-2436-8-1S 400-2436-8-1F 400-2436-F 10.0 254 mm 400-2436-10-1 400-2436-10-1S 400-2436-10-1F 12.0 305 mm 400-2436-12-1S 400-2436-12-1F 1 356 mm 400-2436-14-1S 400-2436-14-1F 1 406 mm 400-2436-16-1S 400-2436-16-1F 102 mm 400-3648-4-1 400-3648-4-1S 400-3648-4-1F 152 mm 400-3648-6-1 400-3648-6-1S 400-3648-6-1F 8.0 203 mm 400-3648-8-1 400-3648-8-1S 400-3648-8-1F 10.0 254 mm 400-3648-10-1 400-3648-10-1S 400-3648-10-1F 400-3648-F 12.0 305 mm 400-3648-12-1S 400-3648-12-1F 1 356 mm 400-3648-14-1S 400-3648-14-1F 406 mm 1 400-3648-16-1S 400-3648-16-1F 457 mm 400-3648-18-1S 400-3648-18-1F 20.0 508 mm 400-3648-20-1S 400-3648-20-1F 2 610 mm 400-3648-24-1S 400-3648-24-1F 102 mm 400-4860-4-1 400-4860-4-1S 400-4860-4-1F 152 mm 400-4860-6-1 400-4860-6-1S 400-4860-6-1F 8.0 203 mm 400-4860-8-1 400-4860-8-1S 400-4860-8-1F 10.0 254 mm 400-4860-10-1 400-4860-10-1S 400-4860-10-1F 12.0 305 mm 400-4860-12-1S 400-4860-12-1F 400-4860-F 1 356 mm 400-4860-14-1S 400-4860-14-1F 1 406 mm 400-4860-16-1S 400-4860-16-1F 457 mm 400-4860-18-1S 400-4860-18-1F 20.0 508 mm 400-4860-20-1S 400-4860-20-1F 2 610 mm 400-4860-24-1S 400-4860-24-1F 30.0 762 mm 400-4860-30-1S 400-4860-30-1F 3 914 mm 400-4860-36-1S 400-4860-36-1F Durable, Rugged, Aluminum Construction Threaded Available up to 10 Male NPT Threads Male BSP Threads Available Upon Request PVC Cap Provided Thru 6 Offset Bypass Example: 400-2436-6-1 Example: 400-2436-6-1S Example: 400-1830-10-1F Example: Custom Plate with No-Flow Bladder Flow Diversion Available for Rent or Sale! 14

250 Series: Single-Size High-Flow Diverters Example: 250-8 250 Series: Single-Size High-Flow Diverters Use for Tie-In s to Structures Largest Bypass Available Eliminate Pumping Around When Working in Manholes or Structures All Aluminum Construction User Friendly - Easy to Work With For Manhole Rehab or Modifications Makes Ventilation Easier for Confined Space Entry Sold Individually Available for Rent or Sale! 2-250-8 s with 6 Flexible Bypass Hose Flow Diversion 250-4 250-6 250-8 250-10 250-12 250-15 250-18 250-21 250-24 250-27 250-30 250 Series: Single-Size High-Flow Diverters 255 Series: Flexible Bypass Hose REQUIRED USES SIZE BYPASS HOSE RANGE DIAMETER LENGTH PRESSURE SIZE SIZE DIAMETER LENGTH 3.0 12.0 2.0 2.0 5-25 255-2 100 mm 76 mm 305 mm 1.7 bar 51 mm 51 mm 1.5 m-7.6 m 5.0 12.0 5-25 255-4 150 mm 127 mm 305 mm 1.7 bar 102 mm 102 mm 1.5 m-7.6 m 8.0 7.0 12.0 5-25 255-6 200 mm 178 mm 305 mm 1.7 bar 152 mm 152 mm 1.5 m-7.6 m 10.0 9.0 15.0 8.0 8.0 5-25 255-8 250 mm 229 mm 381 mm 1.7 bar 203 mm 203 mm 1.5 m-7.6 m 12.0 10.0 17.0 10.0 10.0 5-25 255-10 300 mm 254 mm 432 mm 1.7 bar 254 mm 254 mm 1.5 m-7.6 m 15.0 13.5 12.0 12.0 5-25 255-12 375 mm 343 mm 457 mm 1.7 bar 305 mm 305 mm 1.5 m-7.6 m 1 1 1 5-25 255-14 450 mm 406 mm 457 mm 1.7 bar 356 mm 356 mm 1.5 m-7.6 m 21.0 19.5 5-25 255-18 525 mm 495 mm 457 mm 1.7 bar 457 mm 457 mm 1.5 m-7.6 m 2 22.5 20.0 20.0 5-25 255-20 600 mm 572 mm 457 mm 1.7 bar 508 mm 508 mm 1.5 m-7.6 m 27.0 25.5 2 675 mm 648 mm 457 mm 1.7 bar 610 mm 2 5-25 255-24 30.0 28.5 2 610 mm 1.5 m-7.6 m 750 mm 724 mm 457 mm 1.7 bar 610 mm Larger Sizes Available! Call 800.575.8448 255 Series: Flexible Bypass Hose Sold in 5 ft. Increments Lightweight Rubber Wire Reinforced 2-24 I.D. Larger Sizes Available Upon Request 125 Series Safety Inflation Rope/Hose Page 46 Pole & Attachment for Remote Placement Page 47 15

250 Series: Single-Size High-Flow Diverters Custom 250 Series High-Flow setup with 8, 12, 18, & 24 bypass. Used in Santa Barbara, California to contain flow while 12 manholes were built. No pumping around was required! 2-250-48 with 42 bypass picking up an 8 drop inlet with a 250-8 and a custom 90 elbow Flow Diversion 250-48 with a 42 bypass at a 22 angle Example of 2 High-Flows & Duct installed, resulting in a dry manhole. Flexible duct can be lifted up to work in channel 125 Series Safety Inflation Rope/Hose Page 46 Pole & Attachment for Remote Placement Page 47 16

280 Series: Single-Size High-Flow / No-Flow Diverters No Confined Space Entry Necessary to Control Flow or Place Plug Great for T.V. Van Applications Open or Close Interior Bladder Remotely Use in Rehab, Re-Lining, & New Construction Pole Attachment Available Seals 98% of Flow NOT FOR AIR TESTING Example: 280-8 Available for Rent or Sale! Flow Diversion Inside Bladder Uninflated Inside Bladder Partially Inflated Inside Bladder Inflated & Closed 280 Series: Single-Size High-Flow / No-Flow Diverters REQUIRED MAX MAX ALLOWABLE PRESSURE INSIDE OUTSIDE INSIDE BACK PRESSURE SIZE RANGE DIAMETER LENGTH DIAMETER BLADDER BLADDER AIR WATER 280-6 5.0 12.0 3.0 0-10 psi 15 ft 150 mm 127 mm 305 mm 76 mm 1.7 bar 0-0.69 bar - 4.6 m 280-8 200 mm 178 mm 305 mm 127 mm 1.7 bar 0-0.69 bar 4.6 m 8.0 7.0 12.0 5.0 0-10 psi - 15 ft 280-10 250 mm 229 mm 381 mm 178 mm 1.7 bar 0-0.69 bar 4.6 m 10.0 9.0 15.0 7.0 0-10 psi - 15 ft 280-12 300 mm 254 mm 457 mm 229 mm 1.7 bar 0-0.69 bar 4.6 m 12.0 10.0 9.0 0-10 psi - 15 ft 280-15 15.0 13.5 11.0 0-10 psi - 15 ft 375 mm 343 mm 457 mm 279 mm 1.7 bar 0-0.69 bar 4.6 m Larger Sizes Available! Call 800.575.8448 MUST USE FOR WARRANTY 275 Series Safety Inflation Rope/Hose Page 46 Pole & Attachment for Remote Placement Page 47 17

AV Series / Nozzle Carriers / Lateral Carriers Example: AV-10-4 AV Series: Root Control Foam Applicator Molded Rubber Ends Inflation Hose Inside of 1 Hose Aluminum Camlock Connection Flexible - Will Bend Through Cleanout AV Series: Root Control Foam Applicator Cleanout Access REQUIRED SIZE RANGE LENGTH PRESSURE AV-10-4 100 mm 3.0 m 1.4 bar 10.0 20 psi AV-12-4 100 mm 3.7 m 1.4 bar 12.0 20 psi AV-10-6 150 mm 3.0 m 1.4 bar 10.0 20 psi AV-12-6 150 mm 12.0 3.7 m 20 psi 1.4 bar Custom Lengths Available! Call 800.575.8448 AV Series: Root Control Foam Applicator Tee Access REQUIRED SIZE RANGE LENGTH PRESSURE AV-10-4T 100 mm 3.0 m 1.4 bar 10.0 20 psi AV-12-4T 100 mm 3.7 m 1.4 bar 12.0 20 psi AV-10-6T 150 mm 3.0 m 1.4 bar 10.0 20 psi AV-12-6T 150 mm 12.0 3.7 m 20 psi 1.4 bar Custom Lengths Available! Call 800.575.8448 Keeps Jetter Centered in Pipe Tapered Rubber to Reduce Interference with Jetting Action Available in 3/4 & 1 Male NPT Threads 140 Series: Nozzle Carriers DIAMETER OF RUBBER HOSE SIZE 140-1 90 mm 25 mm 3.5 1.0 140-2 3.5 0.75 90 mm 19 mm Rehabilitation Point Repair for Laterals Exceeds Industry Standards Push Rod Kit Available for Placement & Inflation of Lateral Carrier Push Rod Kit: 3 Pieces - Total Length = 20 Ft. Example: CLA-46 CLA Series: Lateral Point Repair Carriers Ambient Cure REQUIRED SIZE RANGE DIAMETER LENGTH PRESSURE CLA-34 75 mm-100 mm 44 mm 1.1 m 1.7 bar 3.0-1.75 45.0 CLA-46 100 mm-150 mm 70 mm 1.1 m 1.7 bar - 2.75 45.0 CLA-68-8.0 4.63 45.0 150 mm-200 mm 118 mm 1.1 m 1.7 bar CLA-PRK Push Rod Kit - 20 (6.1 m) 18

Carriers Largest Bypass Available Exceeds Industry Standards Available with Cage Kit or Wheel Kit - No Tools Needed - Sold in Pairs Example: CA-812-60 Rehabilitation SIZE RANGE DIAMETER CA-46-60 CA-46-96 CA-46-120 CA-46-144 CA-46-180 CA-610-60 CA-610-96 CA-610-120 CA-610-144 CA-610-180 CA-812-60 CA-812-96 CA-812-120 CA-812-144 CA-812-180 Example: CCK-610-100 mm-150 mm -10.0 150 mm-250 mm 8.0-12.0 200 mm-300 mm 2.5 64 mm 4.25 108 mm 5.25 133 mm Example: CWK-610 CA Series: Point Repair Carriers - Ambient Cure REQUIRED BYPASS PRESSURE SIZE LENGTH APPROXIMATE CONTACT AREA DIAMETER OF PIPE 100 mm 150 mm 60.0 50.0 50.0 1500 mm 1270 mm 1270 mm 9 85.0 85.0 2400 mm 2159 mm 2159 mm 1.0 120.0 109.0 109.0 1.7 bar 25 mm 3050 mm 2769 mm 2769 mm 14 133.0 133.0 3650 mm 3378 mm 3378 mm 180.0 179.0 179.0 4550 mm 4547 mm 4547 mm DIAMETER OF PIPE 8.0 10.0 150 mm 200 mm 250 mm 60.0 50.0 50.0 47.0 1500 mm 1270 mm 1270 mm 1194 mm 9 85.0 85.0 83.0 2400 mm 2159 mm 2159 mm 2108 mm 2.5 120.0 109.0 109.0 107.0 1.7 bar 64 mm 3050 mm 2769 mm 2769 mm 2718 mm 14 133.0 133.0 131.0 3650 mm 3378 mm 3378 mm 3327 mm 180.0 179.0 179.0 177.0 4550 mm 4547 mm 4547 mm 4596 mm DIAMETER OF PIPE 8.0 10.0 12.0 200 mm 250 mm 300 mm 60.0 48.0 4 45.0 1500 mm 1219 mm 1168 mm 1143 mm 9 8 82.0 81.0 2400 mm 2134 mm 2083 mm 2057 mm 3.0 120.0 108.0 10 105.0 1.7 bar 76 mm 3050 mm 2743 mm 2692 mm 2667 mm 14 132.0 130.0 129.0 3650 mm 3353 mm 3302 mm 3277 mm 180.0 168.0 16 163.0 4550 mm 4267 mm 4166 mm 4140 mm Chart Continued on Next Page... OPTIONAL WHEEL KIT CWK-610 CWK-812 OPTIONAL CAGE KIT CCK-46 CCK-610 CCK-812 19

Carriers SIZE RANGE DIAMETER CA-1015-60 CA-1015-96 CA-1015-120 CA-1015-144 CA-1015-180 CA-1218-60 CA-1218-96 CA-1218-120 CA-1218-144 CA-1218-180 CA-1521-60 CA-1521-96 CA-1521-120 CA-1521-144 CA-1521-180 CA-1824-60 CA-1824-96 CA-1824-120 CA-1824-144 CA-1824-180 CA-2130-60 CA-2130-96 CA-2130-120 CA-2130-144 CA-2130-180 CA-2436-60 CA-2436-96 CA-2436-120 CA-2436-144 CA-2436-180 10.0-15.0 250 mm-375 mm 12.0-300 mm-450 mm 15.0-21.0 375 mm-550 mm -2 450 mm-600 mm 21.0-30.0 525 mm-775 mm 2-3 600 mm-900 mm 7.25 184 mm 8.75 222 mm 12.0 305 mm 14.75 375 mm 15.0 381 mm 457 mm CA Series: Point Repair Carriers - Ambient Cure REQUIRED BYPASS PRESSURE SIZE LENGTH APPROXIMATE CONTACT AREA DIAMETER OF PIPE 10.0 12.0 15.0 250 mm 300 mm 375 mm 60.0 48.0 4 45.0 1500 mm 1219 mm 1168 mm 1143 mm 9 8 82.0 81.0 2400 mm 2134 mm 2083 mm 2057 mm 120.0 108.0 10 105.0 1.7 bar 102 mm 3050 mm 2743 mm 2692 mm 2667 mm 14 132.0 130.0 129.0 3650 mm 3353 mm 3302 mm 3277 mm 180.0 168.0 16 163.0 4550 mm 4267 mm 4166 mm 4140 mm DIAMETER OF PIPE 12.0 15.0 300 mm 375 mm 450 mm 60.0 49.0 4 43.0 1500 mm 1245 mm 1118 mm 1092 mm 9 85.0 80.0 79.0 2400 mm 2159 mm 2032 mm 2007 mm 120.0 109.0 10 103.0 1.7 bar 152 mm 3050 mm 2769 mm 2642 mm 2616 mm 14 133.0 128.0 127.0 3650 mm 3378 mm 3251 mm 3226 mm 180.0 169.0 16 163.0 4550 mm 4293 mm 4166 mm 4140 mm DIAMETER OF PIPE 15.0 21.0 375 mm 450 mm 550 mm 60.0 49.0 4 43.0 1500 mm 1245 mm 1118 mm 1092 mm 9 85.0 80.0 79.0 2400 mm 2159 mm 2032 mm 2007 mm 20 psi 120.0 109.0 10 103.0 1.4 bar 152 mm 3050 mm 2769 mm 2642 mm 2616 mm 14 133.0 128.0 127.0 3650 mm 3378 mm 3251 mm 3226 mm 180.0 169.0 16 163.0 4550 mm 4293 mm 4166 mm 4140 mm DIAMETER OF PIPE 21.0 2 450 mm 550 mm 600 mm 60.0 47.0 4 42.0 1500 mm 1194 mm 1118 mm 1067 mm 9 83.0 80.0 78.0 2400 mm 2108 mm 2032 mm 1981 mm 20 psi 120.0 107.0 10 102.0 1.4 bar 152 mm 3050 mm 2718 mm 2642 mm 2591 mm 14 131.0 128.0 12 3650 mm 3327 mm 3251 mm 3200 mm 180.0 167.0 16 162.0 4550 mm 4242 mm 4166 mm 4115 mm DIAMETER OF PIPE 21.0 2 30.0 550 mm 600 mm 750 mm 60.0 45.0 42.0 39.0 1500 mm 1143 mm 1067 mm 991 mm 9 81.0 7 71.0 2400 mm 2057 mm 1930 mm 1803 mm 20 psi 120.0 105.0 100.0 95.0 1.4 bar 152 mm 3050 mm 2667 mm 2540 mm 2413 mm 14 129.0 12 119.0 3650 mm 3277 mm 3150 mm 3023 mm 180.0 165.0 160.0 155.0 4550 mm 4191 mm 4064 mm 3937 mm DIAMETER OF PIPE 2 30.0 3 600 mm 750 mm 900 mm 60.0 45.0 40.0 35.0 1500 mm 1143 mm 1016 mm 889 mm 9 81.0 7 71.0 2400 mm 2057 mm 1930 mm 1803 mm 20 psi 120.0 105.0 100.0 95.0 1.4 bar 152 mm 3050 mm 2667 mm 2540 mm 2413 mm 14 129.0 12 119.0 3650 mm 3277 mm 3150 mm 3023 mm 180.0 165.0 160.0 155.0 4550 mm 4191 mm 4064 mm 3937 mm OPTIONAL WHEEL KIT CWK-1015 CWK-1218 CWK-1521 CWK-1824 CWK-2130 CWK-2436 OPTIONAL CAGE KIT CCK-1015 CCK-1218 CCK-1521 CCK-1824 CCK-2130 CCK-2436 Rehabilitation 20

450 & 460 Series: Steam Process Plugs All Aluminum Construction Field Tested & Approved by CIPP Contractors DuPont Kevlar Reinforced Long Lasting - Buy Fewer Plugs - More Cycles Per Plug! Factory Replaceable Bladder All with 2 MIP Bypass Basket Available with Larger Sizes Sturdy Aluminum Inflation Port. Port Not In Bladder! Rehabilitation Example: 450-48-2 Example: 460-6 450 Series: Multi-Size Steam Process - Kevlar Reinforced REQUIRED SIZE RANGE DIAMETER LENGTH BYPASS SIZE PRESSURE 450-48-2 100 mm-200 mm 97 mm 559 mm 51 mm -8.0 3.8 22.0 2.0 450-610-2 150 mm-250 mm 135 mm 559 mm 51 mm -10.0 5.3 22.0 2.0 450-812-2 200 mm-300 mm 165 mm 559 mm 51 mm 8.0-12 6.5 22.0 2.0 450-1015-2 250 mm-400 mm 216 mm 559 mm 51 mm 10.0-15.0 8.5 22.0 2.0 450-1218-2 300 mm-450 mm 254 mm 559 mm 51 mm 12.0-10.0 22.0 2.0 450-1521-2 375 mm-550 mm 343 mm 610 mm 51 mm 15.0-21.0 13.5 2 2.0 450-1824-2-2 450 mm-625 mm 1 406 mm 24.5 622 mm 2.0 51 mm Larger Sizes Available! Call 800.575.8448 460 Series: Single-Size Steam Process - Kevlar Reinforced REQUIRED SIZE RANGE DIAMETER LENGTH BYPASS SIZE PRESSURE 460-4 100 mm 64 mm 305 mm 25 mm 2.5 12.0 1.0 460-6 150 mm 97 mm 305 mm 51 mm 3.8 12.0 2.0 460-8 200 mm 135 mm 305 mm 51 mm 8.0 5.3 12.0 2.0 460-10 250 mm 165 mm 305 mm 51 mm 10.0 6.5 12.0 2.0 460-12 300 mm 216 mm 305 mm 51 mm 12.0 8.5 12.0 2.0 460-15 375 mm 254 mm 305 mm 51 mm 15.0 10.0 12.0 2.0 460-18 450 mm 343 mm 381 mm 51 mm 13.5 15.0 2.0 460-21 525 mm 406 mm 381 mm 51 mm 21.0 1 15.0 2.0 460-24 2 600 mm 19.0 483 mm 15.0 381 mm 2.0 51 mm Larger Sizes Available! Call 800.575.8448 21

402 Series: Double Bladder Multi-Size Flow Diverters Example: 402-810-4 402 Series: Double Bladder Multi-Size Flow Diverters REQUIRED SIZE RANGE DIAMETER LENGTH BYPASS SIZE WEIGHT PRESSURE 402-46-2-3.8 22.0 2.0 7.0 lbs 100 mm-150 mm 97 mm 559 mm 51 mm 3.2 kg 402-68-3 402-810-4 402-1012-6 402-1215-6 402-1518-6 402-1821-6 402-1830-F 402-2436-F 402-3648-F 402-4860-F 5.5-8.5 150 mm-225 mm 7.0-10.5 175 mm-275 mm 9.0-12.0 225 mm-300 mm 10.5-15.0 275 mm-375 mm 1-350 mm-450 mm 16.5-21.0 425 mm-550 mm 16.5-30.0 425 mm-775 mm 22.0-3 550 mm-950 mm 3-48.0 850 mm-1250 mm 4-60.0 1150 mm-1550 mm Example: 402-4860-F 5.3 135 mm 6.5 165 mm 8.5 216 mm 10.0 254 mm 13.5 343 mm 1 406 mm 1 406 mm 21.5 546 mm 33.0 838 mm 45.0 1143 mm 22.0 559 mm 22.0 559 mm 22.0 559 mm 22.0 559 mm 2 610 mm 24.5 622 mm 82.0 2083 mm 82.0 2083 mm 82.0 2083 mm 82.0 2083 mm 3.0 76 mm 102 mm 152 mm 152 mm 152 mm 152 mm Up to 10.0 (254 mm) Up to 1 (406 mm) Up to 2 (610 mm) Up to 3 (914 mm) 13.0 lbs 5.9 kg 18.0 lbs 8.2 kg 26.0 lbs 11.8 kg 34.0 lbs 15.4 kg 46.0 lbs 20.9 kg 60.0 lbs 27.2 kg 190.0 lbs 86.1 kg 260.0 lbs 117.8 kg 430.0 lbs 194.8 kg 650.0 lbs 294.5 kg Durable, Rugged, Aluminum Construction Pump/Rental Industry Approved All Aluminum Body Separate Inflation Ports for Each Bladder Inflation Port not in Rubber 2 Ply Polyester Reinforced PVC Cap Provided Through 6 Bypass Heavy Duty Bladder 40 PSI Inflation Pressure Factory Repairable/Replaceable Bladder 1830 & Larger Are a Modified 400 Series That Bolt Together & Have a Flanged End Which Allows Easy Changing of Plates for Different Bypass Sizes or Setups Buy 1 Plug - Use Several Different Ways PIPE SIZE 100 mm 150 mm 150 mm 8.0 200 mm 8.0 200 mm 10.0 250 mm 10.0 250 mm 12.0 300 mm 12.0 300 mm 15.0 375 mm 15.0 375 mm 450 mm 450 mm 21.0 525 mm 450 mm 2 600 mm 30.0 750 mm 2 600 mm 30.0 750 mm 3 900 mm 3 900 mm 42.0 1050 mm 48.0 1200 mm 48.0 1200 mm 5 1350 mm 60.0 1500 mm MAX ALLOWABLE BACK PRESSURE AIR WATER 45 ft 13.7 m 45 ft 13.7 m 45 ft 13.7 m 45 ft 13.7 m 45 ft 13.7 m 10 psi 30 ft 0.7 bar 9.1 m 10 psi 30 ft 0.7 bar 9.1 m 10 psi 30 ft 0.7 bar 9.1 m 8 psi 30 ft 0.6 bar 9.1 m 5 psi 30 ft 0.3 bar 9.1 m 8 psi 30 ft 0.6 bar 9.1 m 8 psi 30 ft 0.6 bar 9.1 m 5 psi 30 ft 0.3 bar 9.1 m Rehabilitation 22

600/650 Series: Multi-Size Back Plugs / Leak Locators DuPont Kevlar Reinforced Ozone Protected Rubber Surface Sturdy Steel Internal End Plates with Inflation & Test-Thru Ports Wrapped Finish Surface Extra 1/4 Thickness - No Oversleeve Necessary Factory Repairable - No Patches - Vulcanized Higher Inflation Pressure for Increased Safety Margin Protected with Pressure Relief Valve to Help Prevent Over Inflation Pneumatic Plugs Example: 600-610 Example: 650-610 Available for Rent or Sale! Example: 600-1824 Example: 650-1824 125 Series Safety Inflation Rope/Hose Page 46 23

600/650 Series: Multi-Size Back Plugs / Leak Locators 600/650 Series: Multi-Size Back Plugs / Leak Locators SIZE RANGE DIAMETER LENGTH WEIGHT 3.8-3.5 13.0 2.5 lbs 600-46 100 mm-150 mm 89 mm 330 mm 1.1 kg 650-46 600-610 650-610 600-812 650-812 600-1016 650-1016 600-1218 650-1218 600-1224 650-1224 600-1521 650-1521 600-1530 650-1530 600-1824 650-1824 600-1830 650-1830 5.5-10.0 150 mm-250 mm 7.5-12.0 200 mm-300 mm 9.0-1 225 mm-400 mm 11.0-275 mm-450 mm 11.0-2 275 mm-625 mm 13.5-21.0 350 mm-550 mm 13.5-30.0 350 mm-775 mm 1-2 400 mm-625 mm 16.5-30.0 425 mm-775 mm 5.0 127 mm 7.0 178 mm 8.8 224 mm 10.5 267 mm 10.5 267 mm 13.0 330 mm 13.0 330 mm 15.5 394 mm 1 406 mm 22.0 559 mm 22.5 572 mm 25.0 635 mm 28.0 711 mm 47.0 1194 mm 31.5 800 mm 57.0 1548 mm 35.5 902 mm 47.0 1194 mm 7.2 lbs 3.3 kg 10.0 lbs 4.5 kg 16.0 lbs 7.3 kg 21.5 lbs 9.7 kg 30.0 lbs 13.6 kg 30.0 lbs 13.6 kg 55.0 lbs 24.9 kg 38.5 lbs 17.5 kg 68.0 lbs 30.8 kg REQUIRED PRESSURE 35 psi 2.4 bar 35 psi 2.4 bar 35 psi 2.4 bar 35 psi 2.4 bar 35 psi 2.4 bar 1.7 bar 35 psi 2.4 bar 1.7 bar 35 psi 2.4 bar 1.7 bar PIPE SIZE 100 mm 150 mm 150 mm 8.0 200 mm 10.0 250 mm 8.0 200 mm 10.0 250 mm 12.0 300 mm 10.0 250 mm 12.0 300 mm 15.0 375 mm 12.0 300 mm 15.0 375 mm 450 mm 12.0 300 mm 450 mm 2 600 mm 15.0 375 mm 450 mm 21.0 525 mm 15.0 375 mm 21.0 525 mm 30.0 775 mm 450 mm 21.0 525 mm 2 600 mm 450 mm 21.0 525 mm 2 600 mm 30.0 775 mm MAX ALLOWABLE BACK PRESSURE AIR 10 psi 0.7 bar 10 psi 0.7 bar 13 psi 0.9 bar 10 psi 0.7 bar 10 psi 0.7 bar 13 psi 0.9 bar 10 psi 0.7 bar 10 psi 0.7 bar 10 psi 0.7 bar 10 psi 0.7 bar WATER 25 ft 7.6 m 25 ft 7.6 m 30 ft 9.1 m 25 ft 7.6 m 30 ft 9.1 m 30 ft 9.1 m 25 ft 7.6 m 30 ft 9.1 m 30 ft 9.1 m Pneumatic Plugs 125 Series Safety Inflation Rope/Hose Page 46 24

600/650 Series: Multi-Size Back Plugs / Leak Locators Example: 600-2448 Deflated Pneumatic Plugs Available for Rent or Sale! DuPont Kevlar Reinforced Ozone Protected Rubber Surface Sturdy Steel Internal End Plates with Inflation & Test-Thru Ports Wrapped Finish Surface Extra 1/4 Thickness - No Oversleeve Necessary Factory Repairable - No Patches - Vulcanized Higher Inflation Pressure for Increased Safety Margin Protected with Pressure Relief Valve to Help Prevent Over Inflation 3/4 Bypass Port Example: 600-2448 Inflated 119 Series Safety Inflation Rope/Hose Page 46 25

600/650 Series: Multi-Size Back Plugs / Leak Locators 600/650 Series: Multi-Size Back Plugs / Leak Locators REQUIRED SIZE RANGE DIAMETER LENGTH WEIGHT PRESSURE PIPE SIZE 18.5-3 65.0 95.0 lbs 20.0 600-2036 475 mm-950 mm 457 mm 1651 mm 43.0 kg 1.7 bar 500 mm 2 650-2036 600 mm 30.0 775 mm 3 900 mm 22.5-48.0 21.5 90.0 145.0 lbs 2 600-2448 575 mm-1250 mm 546 mm 2286 mm 65.7 kg 1.7 bar 600 mm 30.0 650-2448 775 mm 3 900 mm 42.0 1050 mm 48.0 1200 mm 35.0-60.0 3 90.0 235.0 lbs 20 psi 3 600-3660 900 mm-1550 mm 864 mm 2286 mm 106.5 kg 1.4 bar 900 mm 42.0 650-3660 1050 mm 48.0 1200 mm 5 1350 mm 60.0 1500 mm 41.0-78.0 40.0 102.0 300.0 lbs 42.0 600-4278 1050 mm-2000 mm 1016 mm 2591 mm 135.9 kg 1050 mm 5 650-4278 1350 mm 6 1700 mm 78.0 2000 mm 47.0-72.0 4 90.0 325.0 lbs 20 psi 48.0 600-4872 1200 mm-1850 mm 1168 mm 2286 mm 147.2 kg 1.4 bar 1200 mm 5 650-4872 1350 mm 60.0 1500 mm 6 1700 mm 72.0 1800 mm 59.0-9 58.0 110.0 550.0 lbs 12 psi 60.0 600-6096 1500 mm-2450 mm 1473 mm 2794 mm 249.2 kg 0.8 bar 1500 mm 72.0 650-6096 1850 mm 8 2150 mm 9 2450 mm MAX ALLOWABLE BACK PRESSURE AIR WATER 10 psi 0.7 bar 10 psi 30 ft 0.7 bar 9.1 m 10 psi 30 ft 0.7 bar 9.1 m 10 psi 25 ft 0.7 bar 7.6 m 13 psi 30 ft 0.9 bar 9.1 m 10 psi 25 ft 0.7 bar 7.6 m 8 psi 20 ft 0.6 bar 6.1 m 6 psi 14 ft 0.4 bar 4.3 m 6 psi 14 ft 0.4 bar 4.3 m 6 psi 14 ft 0.4 bar 4.3 m 6 psi 14 ft 0.4 bar 4.3 m 13 psi 30 ft 0.9 bar 9.1 m 10 psi 25 ft 0.7 bar 7.6 m 8 psi 20 ft 0.6 bar 6.1 m 8 psi 18 ft 0.6 bar 5.5 m 6 psi 14 ft 0.4 bar 4.3 m 6 psi 14 ft 0.4 bar 4.3 m 6 psi 14 ft 0.4 bar 4.3 m 6 psi 14 ft 0.4 bar 4.3 m Pneumatic Plugs 675 Series: Multi-Size Leak Locators with Large Bypass REQUIRED SIZE RANGE DIAMETER LENGTH WEIGHT PRESSURE BYPASS SIZE 675-2448-4 22.5-48.0 21.5 90.0 175.0 lbs 20 psi 575 mm-1250 mm 546 mm 2286 mm 79.3 kg 1.4 bar 102 mm 675-2448-6 152 mm Available with 4 or 6 Bypass PIPE SIZE 2 600 mm 30.0 775 mm 3 900 mm 42.0 1050 mm 48.0 1200 mm MAX ALLOWABLE BACK PRESSURE AIR WATER 10 psi 30 ft 0.7 bar 9.1 m 10 psi 25 ft 0.7 bar 7.6 m 26

605/655 Series: Multi-Size Back Plugs / Leak Locators with Larger Bypass DuPont Kevlar Reinforced Ozone Protected Rubber Surface Sturdy Steel Internal End Plates with Inflation & Test-Thru Ports Molded Patented Texture with Seal Ribs Made from Soft, Durable, All Natural Rubber Competitive Pricing Protected with Pressure Relief Valve to Help Prevent Over Inflation Pneumatic Plugs Example: 655-812 600/650 Series: Multi-Size Back Plugs / Leak Locators SIZE RANGE DIAMETER LENGTH WEIGHT 3.8-3.5 12.0 2.5 lbs 605-46 100 mm-150 mm 89 mm 305 mm 1.1 kg 655-46 605-610 655-610 605-812 655-812 605-1016 655-1016 5.5-10.0 150 mm-250 mm 7.5-12.0 200 mm-300 mm 9.0-1 225 mm-400 mm 5.0 127 mm 7.0 178 mm 8.8 224 mm 17.5 445 mm 19.0 483 mm 21.5 546 mm 7.0 lbs 3.2 kg 10.0 lbs 4.5 kg 16.0 lbs 7.3 kg REQUIRED PRESSURE 35 psi 2.4 bar 35 psi 2.4 bar 35 psi 2.4 bar 35 psi 2.4 bar Test-Thru Port Size 1/4 6.4 mm 3/4 19.1 mm 3/4 19.1 mm 3/4 19.1 mm Available for Rent or Sale! PIPE SIZE 100 mm 150 mm 150 mm 8.0 200 mm 10.0 250 mm 8.0 200 mm 10.0 250 mm 12.0 300 mm 10.0 250 mm 12.0 300 mm 15.0 375 mm MAX ALLOWABLE BACK PRESSURE AIR 10 psi 0.7 bar 10 psi 0.7 bar WATER 25 ft 7.6 m 25 ft 7.6 m 125 Series Safety Inflation Rope/Hose Page 46 27

500 Series: Multi-Size Plugs with Seal Ribs Made with DuPont Kevlar Safety Pressure Relief Valve 1 Piece Forged Zinc Plated Eyelets Field Replaceable Inflation Fitting Positive Seal Ribs Manufactured From Extra Thick, All Natural, Soft, Durable Rubber Pole Attachment Available Example: 500-812 500 Series: Multi-Size Plugs with Seal Ribs REQUIRED MAX ALLOWABLE BACK PRESSURE SIZE RANGE DIAMETER LENGTH WEIGHT PRESSURE PIPE SIZE AIR WATER 100 mm 500-48 3.8-8.0 100 mm-200 mm 3.5 89 mm 20.0 508 mm 3.5 lbs 1.6 kg 150 mm 200 mm 8.0 0.69 bar 10 psi 9.1 m 30 ft 150 mm 500-610 5.0-10.0 125 mm-250 mm 4.9 124 mm 21.0 533 mm 6.0 lbs 2.7 kg 35 psi 2.4 bar 8.0 200 mm 250 mm 10.0 0.69 bar 10 psi 8.0 200 mm 500-812 7.5-12.0 200 mm-300 mm 7.0 178 mm 22.0 559 mm 10.0 lbs 4.5 kg 35 psi 2.4 bar 10.0 250 mm 300 mm 12.0 0.7 bar 10 psi 10.0 250 mm 12.0 500-1016 9.5-1 9.0 23.0 15.0 lbs 35 psi 300 mm 250 mm-400 mm 229 mm 584 mm 6.8 kg 2.4 bar 1 10 psi 350 mm 0.69 bar 1 400 mm 10 psi 0.69 bar 30 ft 9.1 m 12.0 300 mm 500-1218 11.5-300 mm-450 mm 11.0 279 mm 25.0 635 mm 19.0 lbs 8.6 kg 35 psi 2.4 bar 15.0 375 mm 450 mm 0.7 bar 10 psi 15.0 375 mm 500-1521 1-21.0 350 mm-550 mm 13.3 338 mm 28.0 711 mm 26.0 lbs 11.8 kg 35 psi 2.4 bar 450 mm 525 mm 21.0 0.7 bar 10 psi Pneumatic Plugs 125 Series Safety Inflation Rope/Hose Page 46 Pole & Attachment for Remote Placement Page 47 28

601 & 401 Series: Protective Sleeves for Large Plugs Example: 601-2036 Example: 401-1824 Pneumatic Plugs 601 Series: Protective Sleeves FOR USE WITH... THICKNESS 601-1824 600/650-1824 1/4 6.4 mm 601-1830 600/650-1830 1/4 6.4 mm 601-2036 600/650-2036 1/4 6.4 mm 601-2448 600/650-2448 1/4 6.4 mm 601-3660 600/650-3660 1/4 6.4 mm 601-4278 600/650-4278 1/4 6.4 mm 601-4872 600/650-4872 1/4 6.4 mm 601-6096 600/650-6096 1/4 6.4 mm 401 Series: Protective Sleeves FOR USE WITH... THICKNESS 401-1824 400-1824 1/4 6.4 mm 401-1830 400-1830 1/4 6.4 mm 401-2436 400-2436 1/4 6.4 mm 401-3648 400-3648 1/4 6.4 mm 401-4860 400-4860 1/4 6.4 mm If you truly feel added protection is necessary due too old, deteriorated lines, these protective sleeves can help! Protects the plugs surface. Helps to Eliminate Cuts on Plug Surface Perfect for the Rental Industry & Frequent Users Extends the Life of the Plugs Made from Soft, Durable, All Natural Rubber Flexible 29

700 Series: Multi-Size Washballs Polyester Reinforced 5/8 Thick Rubber Multi-Size Steel, Zinc-Plated Swivel Field Replaceable Inflation Fitting Lasts Longer, Saves Money Example: 700-1218 700 Series: Multi-Size Washballs SIZE RANGE DIAMETER LENGTH WEIGHT 700-4 90 mm-125 mm 76 mm 152 mm 1.4 kg 3.5-4.5 3.0 3.0 lbs 700-68 125 mm-200 mm 114 mm 356 mm 2.7 kg 5.0-8.0 4.5 1 6.0 lbs 700-812 200 mm-300 mm 165 mm 559 mm 3.6 kg 7.0-12.0 6.5 22.0 8.0 lbs 700-1015 250 mm-375 mm 229 mm 572 mm 5.4 kg 9.0-15.0 8.5 22.5 12.0 lbs 700-1218 300 mm-450 mm 279 mm 635 mm 8.6 kg 11.0-10.5 25.0 19.0 lbs 700-1521 350 mm-550 mm 343 mm 711 mm 11.3 kg 1-21.0 13.5 28.0 25.0 lbs 700-1824 425 mm-600 mm 419 mm 800 mm 15.9 kg 17.0-2 16.5 31.5 35.0 lbs 700-2030 475 mm-775 mm 470 mm 902 mm 22.7 kg 19.0-30.0 18.5 35.5 50.0 lbs 700-2033 475 mm-850 mm 470 mm 1219 mm 34.0 kg 19.0-33.0 18.5 48.0 75.0 lbs 700-2436 600 mm-950 mm 521 mm 1651 mm 45.3 kg 2-3 20.5 65.0 100.0 lbs 700-3048 750 mm-1250 mm 572 mm 2286 mm 79.3 kg 30.0-48.0 22.5 90.0 175.0 lbs 700-4860 48.0-60.0 35.0 92.0 295.0 lbs 1200 mm-1550 mm 889 mm 2337 mm 133.7 kg Pneumatic Plugs 30

800 / 825 / 850 Series: High Pressure Plugs DuPont Kevlar Reinforced Read Back Pressure Port 4 Thru 12 - All Aluminum Construction 14 & Larger - All Steel Construction 14 & Larger - 2 Bypass Larger & Custom Sizes Available Higher Test Pressures Available Available for Rent or Sale! Example: 800-10 Example: 800-46 Pneumatic Plugs 800-4 800-6 800-8 800-10 800-12 800-15 800-18 800-21 800-24 800-27 800-30 800-33 800-36 800-39 800-42 800-45 800-48 800-54 800-60 800-66 800-72 800-78 800-84 800-90 800-96 REQUIRED PRESSURE 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 13.8 bar 800 Series: High Pressure Plugs - 150 PSI TEST MAX ALLOWABLE BACK PRESSURE SIZE RANGE DIAMETER LENGTH 3.8-4.5 3.5 10.3 bar 100 mm-125 mm 89 mm 457 mm 5.5-6.5 5.0 10.3 bar 150 mm-175 mm 127 mm 457 mm 7.0-8.5 6.5 10.3 bar 175 mm-225 mm 165 mm 457 mm 9.0-10.5 8.0 10.3 bar 225 mm-275 mm 203 mm 457 mm 11.0-12.5 10.0 10.3 bar 275 mm-325 mm 254 mm 457 mm 1-15.5 13.0 10.3 bar 350 mm-400 mm 330 mm 457 mm 17.0-18.5 1 10.3 bar 425 mm-475 mm 406 mm 457 mm 20.0-21.5 19.0 10.3 bar 500 mm-550 mm 483 mm 457 mm 23.0-24.5 22.0 10.3 bar 575 mm-625 mm 559 mm 457 mm 2-27.5 25.0 10.3 bar 650 mm-700 mm 635 mm 457 mm 29.0-30.5 28.0 10.3 bar 750 mm-800 mm 711 mm 457 mm 32.0-33.5 31.0 10.3 bar 800 mm-850 mm 787 mm 457 mm 35.0-36.5 3 10.3 bar 900 mm-950 mm 864 mm 457 mm 38.0-39.5 37.0 10.3 bar 950 mm-1000 mm 940 mm 457 mm 41.0-42.5 40.0 10.3 bar 1050 mm-1100 mm 1016 mm 457 mm 4-45.5 43.0 10.3 bar 1100 mm-1150 mm 1092 mm 457 mm 47.0-48.5 4 10.3 bar 1200 mm-1250 mm 1168 mm 457 mm 53.0-54.5 52.0 10.3 bar 1350 mm-1400 mm 1321 mm 457 mm 59.0-60.5 58.0 10.3 bar 1500 mm-1550 mm 1473 mm 457 mm 65.0-66.5 6 10.3 bar 1650 mm-1700 mm 1626 mm 457 mm 71.0-72.5 70.0 10.3 bar 1800 mm-1850 mm 1778 mm 457 mm 77.0-78.5 7 10.3 bar 1950 mm-2000 mm 1930 mm 457 mm 83.0-84.5 82.0 10.3 bar 2100 mm-2150 mm 2083 mm 457 mm 89.0-90.5 88.0 10.3 bar 2250 mm-2300 mm 2235 mm 457 mm 95.0-96.5 9 10.3 bar 2400 mm-2450 mm 2388 mm 457 mm Custom Sizes Available! Call 800.575.8448 31

800 / 825 / 850 Series: High Pressure Plugs 825-4 825-6 825-8 825-10 825-12 825-15 825-18 825-21 825-24 825-27 825-30 825-33 825-36 825-39 825-42 825-45 825-48 850-4 850-6 850-8 850-10 850-12 850-15 850-18 850-21 850-24 850-27 850-30 850-33 850-36 850-39 850-42 825 Series: High Pressure Plugs - 200 PSI TEST REQUIRED PRESSURE 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar 17.2 bar MAX ALLOWABLE BACK PRESSURE SIZE RANGE DIAMETER LENGTH 3.8-4.5 3.5 13.8 bar 100 mm-125 mm 89 mm 457 mm 5.5-6.5 5.0 13.8 bar 150 mm-175 mm 127 mm 457 mm 7.0-8.5 6.5 13.8 bar 175 mm-225 mm 165 mm 457 mm 9.0-10.5 8.0 13.8 bar 225 mm-275 mm 203 mm 457 mm 11.0-12.5 10.0 13.8 bar 275 mm-325 mm 254 mm 457 mm 1-15.5 13.0 13.8 bar 350 mm-400 mm 330 mm 457 mm 17.0-18.5 1 13.8 bar 425 mm-475 mm 406 mm 457 mm 20.0-21.5 19.0 13.8 bar 500 mm-550 mm 483 mm 457 mm 23.0-24.5 22.0 13.8 bar 575 mm-625 mm 559 mm 457 mm 2-27.5 25.0 13.8 bar 650 mm-700 mm 635 mm 457 mm 29.0-30.5 28.0 13.8 bar 750 mm-800 mm 711 mm 457 mm 32.0-33.5 31.0 13.8 bar 800 mm-850 mm 787 mm 457 mm 35.0-36.5 3 13.8 bar 900 mm-950 mm 864 mm 457 mm 38.0-39.5 37.0 13.8 bar 950 mm-1000 mm 940 mm 457 mm 41.0-42.5 40.0 13.8 bar 1050 mm-1100 mm 1016 mm 457 mm 4-45.5 43.0 13.8 bar 1100 mm-1150 mm 1092 mm 457 mm 47.0-48.5 4 13.8 bar 1200 mm-1250 mm 1168 mm 457 mm 850 Series: High Pressure Plugs - 250 PSI TEST REQUIRED PRESSURE 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar 300 psi 20.7 bar Available for Rent or Sale! MAX ALLOWABLE BACK PRESSURE SIZE RANGE DIAMETER LENGTH 3.8-4.5 3.5 17.2 bar 100 mm-125 mm 89 mm 457 mm 5.5-6.5 5.0 17.2 bar 150 mm-175 mm 127 mm 457 mm 7.0-8.5 6.5 17.2 bar 175 mm-225 mm 165 mm 457 mm 9.0-10.5 8.0 17.2 bar 225 mm-275 mm 203 mm 457 mm 11.0-12.5 10.0 17.2 bar 275 mm-325 mm 254 mm 457 mm 1-15.5 13.0 17.2 bar 350 mm-400 mm 330 mm 457 mm 17.0-18.5 1 17.2 bar 425 mm-475 mm 406 mm 457 mm 20.0-21.5 19.0 17.2 bar 500 mm-550 mm 483 mm 457 mm 23.0-24.5 22.0 17.2 bar 575 mm-625 mm 559 mm 457 mm 2-27.5 25.0 17.2 bar 650 mm-700 mm 635 mm 457 mm 29.0-30.5 28.0 17.2 bar 750 mm-800 mm 711 mm 457 mm 32.0-33.5 31.0 17.2 bar 800 mm-850 mm 787 mm 457 mm 35.0-36.5 3 17.2 bar 900 mm-950 mm 864 mm 457 mm 38.0-39.5 37.0 17.2 bar 950 mm-1000 mm 940 mm 457 mm 41.0-42.5 40.0 17.2 bar 1050 mm-1100 mm 1016 mm 457 mm Hydrostatic Test Pumps GALLONS PER MINUTE PRESSURE DPH-3B 42 liters/min Up to 37.9 bar 11 gallons/min Up to 550 psi DPH-8 121 liters/min Up to 20.7 bar 32 gallons/min Up to 300 psi DPH-56/250 56 gallons/min Up to 212 liters/min Up to 17.2 bar 123HP Series Safety Inflation Rope/Hose Page 46 Pneumatic Plugs 32

100 & 200 Series: Pneumatic Single-Size User Friendly Exceeds Industry Standards Economical 1 Piece Forged Zinc Plated Eyelets Field Replaceable Inflation Fitting Positive Seal Ribs Manufactured From All Natural, Soft, Durable Rubber Pole Attachment Available Example: 100-12 Example: 200-8-2 Pneumatic Plugs 100 Series: Pneumatic Single-Size REQUIRED PART # SIZE RANGE DIAMETER LENGTH WEIGHT PRESSURE 100-4 90 mm-125 mm 90 mm 140 mm 0.67 kg 1.7 bar 3.5-4.5 3.5 5.5 1.5 lbs 100-6 125 mm-175 mm 125 mm 152 mm 1.4 kg 1.7 bar 5.0-6.5 5.0 3.0 lbs 100-8 175 mm-225 mm 175 mm 191 mm 2.3 kg 1.7 bar 7.0-8.5 7.0 7.5 5.0 lbs 100-10 225 mm-275 mm 225 mm 254 mm 3.8 kg 1.4 bar 9.0-10.5 9.0 10.0 8.5 lbs 20 psi 100-12 275 mm-325 mm 275 mm 305 mm 5.6 kg 1.4 bar 11.0-12.5 11.0 12.0 12.5 lbs 20 psi 100-15 350 mm-400 mm 350 mm 381 mm 10.9 kg 1.7 bar 13.5-15.5 13.5 15.0 24.0 lbs 100-18 425 mm-470 mm 425 mm 457 mm 15.5 kg 1.7 bar 16.5-18.5 16.5 33.5 lbs 100-21 18.5-21.5 18.5 21.0 42.0 lbs 20 psi 475 mm-550 mm 475 mm 533 mm 19.1 kg 1.4 bar 200 Series: Pneumatic Single-Size with Bypass REQUIRED SIZE RANGE DIAMETER LENGTH WEIGHT BYPASS SIZE PRESSURE 200-4-1 90 mm-125 mm 90 mm 203 mm 0.67 kg 25.4 mm 1.7 bar 3.5-4.5 3.5 8.0 1.5 lbs 1 200-6-1 125 mm-175 mm 125 mm 203 mm 1.4 kg 25.4 mm 1.7 bar 5.0-6.5 5.0 8.0 3.0 lbs 1 200-8-2 175 mm-225 mm 175 mm 254 mm 2.7 kg 50.8 mm 1.7 bar 7.0-8.5 7.0 10.0 6.0 lbs 2 200-10-3 225 mm-275 mm 225 mm 330 mm 4.8 kg 76.2 mm 1.4 bar 9.0-10.5 9.0 13.0 10.5 lbs 3 20 psi 200-12-4 275 mm-325 mm 275 mm 381 mm 7.0 kg 101.6 mm 1.4 bar 11.0-12.5 11.0 15.0 15.5 lbs 4 20 psi 200-15-4 350 mm-400 mm 350 mm 483 mm 14.5 kg 101.6 mm 1.7 bar 13.5-15.5 13.5 19.0 27.5 lbs 4 200-18-4 425 mm-470 mm 425 mm 533 mm 18.4 kg 101.6 mm 1.7 bar 16.5-18.5 16.5 21.0 40.5 lbs 4 200-21-4 18.5-21.5 18.5 2 48.5 lbs 4 20 psi 475 mm-550 mm 475 mm 610 mm 22.0 kg 101.6 mm 1.4 bar MAX ALLOWABLE BACK PRESSURE AIR WATER 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 8 psi 20 ft 0.55 bar 6.1 m MAX ALLOWABLE BACK PRESSURE AIR WATER 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 10 psi 25 ft 0.69 bar 7.6 m 8 psi 20 ft 0.55 bar 6.1 m 125 Series Safety Inflation Rope/Hose Page 46 Pole & Attachment for Remote Placement Page 47 33

300 & 310 Series: Disc Plugs All Steel Construction Extra Heavy Duty Rubber Bladder Excellent in Confined Areas Can be Sectioned to Fit Through Manholes Custom Fabrication Available upon Request Example: 300-54 300 Series: Disc Plugs REQUIRED MAX ALLOWABLE BACK PRESSURE DIAMETER WIDTH PRESSURE AIR WATER 300-24 584 mm 102 mm 4.5 bar 0.34 bar 3.0 m 23.0 65 psi 5 psi 10 ft 300-27 660 mm 102 mm 4.5 bar 0.34 bar 3.0 m 2 65 psi 5 psi 10 ft 300-30 737 mm 102 mm 4.5 bar 0.34 bar 3.0 m 29.0 65 psi 5 psi 10 ft 300-33 813 mm 102 mm 4.5 bar 0.34 bar 3.0 m 32.0 65 psi 5 psi 10 ft 300-36 889 mm 102 mm 4.5 bar 0.34 bar 3.0 m 35.0 65 psi 5 psi 10 ft 300-39 965 mm 102 mm 4.5 bar 0.34 bar 3.0 m 38.0 65 psi 5 psi 10 ft 300-42 1041 mm 102 mm 4.5 bar 0.34 bar 3.0 m 41.0 65 psi 5 psi 10 ft 300-45 1118 mm 102 mm 4.5 bar 0.34 bar 3.0 m 4 65 psi 5 psi 10 ft 300-48 1194 mm 102 mm 4.5 bar 0.34 bar 3.0 m 47.0 65 psi 5 psi 10 ft 300-54 1346 mm 102 mm 4.5 bar 0.34 bar 3.0 m 53.0 65 psi 5 psi 10 ft 300-60 1499 mm 102 mm 4.5 bar 0.34 bar 3.0 m 59.0 65 psi 5 psi 10 ft 300-66 1676 mm 102 mm 4.5 bar 0.34 bar 3.0 m 65.0 65 psi 5 psi 10 ft 300-72 1803 mm 102 mm 4.5 bar 0.34 bar 3.0 m 71.0 65 psi 5 psi 10 ft 300-78 1956 mm 102 mm 4.5 bar 0.34 bar 3.0 m 77.0 65 psi 5 psi 10 ft 300-84 2108 mm 102 mm 4.5 bar 0.34 bar 3.0 m 83.0 65 psi 5 psi 10 ft 300-90 2261 mm 102 mm 4.5 bar 0.34 bar 3.0 m 89.0 65 psi 5 psi 10 ft 300-96 95.0 2413 mm 102 mm 65 psi 4.5 bar 5 psi 0.34 bar 10 ft 3.0 m Custom Sizes Available! Call 800.575.8448 Examples: 310 Series Pneumatic Plugs 34

WE Series: Cleanout & Lateral Plugs Pneumatic Plugs WE-15S WE-2S WE-3S WE-4S WE Series: Short REQUIRED PIPE SIZE PRESSURE 1.25-1.5 30 mm-40 mm 2.0 50 mm 3.0 32 psi 75 mm 2.2 bar 32 psi 100 mm 2.2 bar MAX ALLOWABLE BACK PRESSURE AIR WATER 13 psi 30 ft 0.9 bar 9.1 m 13 psi 30 ft 0.9 bar 9.1 m 13 psi 30 ft 0.9 bar 9.1 m 13 psi 30 ft 0.9 bar 9.1 m WE-2 WE-3 WE-4 WE Series: Long REQUIRED PIPE SIZE PRESSURE 2.0 50 mm 3.0 32 psi 75 mm 2.2 bar 32 psi 100 mm 2.2 bar MAX ALLOWABLE BACK PRESSURE AIR WATER 13 psi 30 ft 0.9 bar 9.1 m 13 psi 30 ft 0.9 bar 9.1 m 13 psi 30 ft 0.9 bar 9.1 m WE-46 WE Series: Multi-Size REQUIRED MAX ALLOWABLE BACK PRESSURE PIPE SIZE PRESSURE AIR WATER - 13 psi 30 ft 100 mm-150 mm 0.9 bar 9.1 m 35

NP Series: Non-Pressure Plugs Available from 6 to 60 Polyethylene Construction with Rubber Gasket for Watertight Seal Keep Out Water, Sand, Mud, Animals, Children, or Just About Anything Else Saves Clean Out Costs Use for Temporary or Permanent Cover NP Series: Non-Pressure Plugs BELL END DUCTILE IRON SDR 21 (CL 200) ULTRA STEEL VYLON & SIZE & C-900 POLYETHYLENE CONCRETE SDR 35 SDR 26 & 26 (CL 160) RIB GAS PRO 21 301-106 302-106 303-106 304-106 305-106 306-106 308-106 8.0 301-108 302-108 303-108 304-108 305-108 306-108 307-108 308-108 10.0 301-110 302-110 303-110 304-110 305-110 306-110 307-110 12.0 301-112 302-112 303-112 304-112 305-112 306-112 307-112 308-112 1 301-114 15.0 302-115 303-115 304-115 305-115 307-115 308-115 1 301-116 301-118 302-118 303-118 304-118 305-118 307-118 308-118 20.0 301-120 21.0 304-121 305-121 307-121 309-121 2 301-124 302-124 303-124 304-124 305-124 307-124 308-124 309-124 27.0 307-127 309-127 30.0 301-130 302-130 303-130 307-130 308-130 309-130 33.0 309-133 3 301-136 302-136 303-136 308-136 309-136 42.0 301-142 302-142 303-142 309-142 48.0 301-148 302-148 303-148 309-148 5 301-154 302-154 303-154 309-154 60.0 301-160 302-160 303-160 309-160 Mechanical Plugs NP Series: Non-Pressure Plugs SPIGOT END DUCTILE IRON SDR 21 (CL 200) ULTRA STEEL VYLON & SIZE & C-900 POLYETHYLENE CONCRETE SDR 35 SDR 26 & 26 (CL 160) RIB GAS PRO 21 301-206 302-206 303-206 304-206 305-206 306-206 308-206 8.0 301-208 302-208 303-208 304-208 305-208 306-208 307-208 308-208 10.0 301-210 302-210 303-210 304-210 305-210 306-210 307-210 12.0 301-212 302-212 303-212 304-212 305-212 306-212 307-212 308-212 1 301-214 15.0 302-215 303-215 304-215 305-215 307-215 308-215 1 301-216 301-218 302-218 303-218 304-218 305-218 307-218 308-218 20.0 301-220 21.0 307-221 2 301-224 302-224 303-224 304-224 305-224 307-224 308-224 309-224 27.0 307-227 309-227 30.0 301-230 302-230 303-230 307-230 308-230 309-230 33.0 309-233 3 301-236 302-236 303-236 308-236 309-236 42.0 301-242 302-242 303-242 309-242 48.0 301-248 302-248 303-248 309-248 5 301-254 302-254 303-254 309-254 60.0 301-260 302-260 303-260 309-260 36

HT Series: Plastic Mechanical Pipe Plugs User Friendly Economical Optional Bypass Port Mechanical Plugs Plug Openings in Sewer Lines Rubber Expansion Rings Will Fit Irregular Concrete Openings Seal Both Ends of PVC Pipe HT-4 HT-4B HT-5 HT-5B HT-6 HT-6B HT-8 HT-8B HT-10B HT-12B HT-15B HT-18B HT Series: Plastic Mechanical Pipe Plugs BYPASS & MAX ALLOWABLE PIPE SIZE READ BACK BACK PRESSURE (I.D) PORT WEIGHT AIR WATER 1.0lbs 5 psi 10 ft - 100 mm 0.45kgs 0.34 bar 3.0 m 1/2 1.0 lbs 5 psi 10 ft 100 mm 12.7 mm 0.45 kgs 0.34 bar 3.0 m 5.0 1.0 lbs 5 psi 10 ft - 125 mm 0.45 kgs 0.34 bar 3.0 m 5.0 1/2 1.0 lbs 5 psi 10 ft 125 mm 12.7 mm 0.45 kgs 0.34 bar 3.0 m 1.5 lbs 5 psi 10 ft - 150 mm 0.68 kgs 0.34 bar 3.0 m 1/2 1.5 lbs 5 psi 10 ft 150 mm 12.7 mm 0.68 kgs 0.34 bar 3.0 m 8.0 2.5 lbs 5 psi 10 ft - 200 mm 1.1 kgs 0.34 bar 3.0 m 8.0 1/2 2.5 lbs 5 psi 10 ft 200 mm 12.7 mm 1.1 kgs 0.34 bar 3.0 m 10.0 1/2 5.5 lbs 5 psi 10 ft 250 mm 12.7 mm 2.5 kgs 0.34 bar 3.0 m 12.0 1/2 6.5 lbs 5 psi 10 ft 300 mm 12.7 mm 2.9 kgs 0.34 bar 3.0 m 15.0 1/2 11.5 lbs 5 psi 10 ft 375 mm 12.7 mm 5.2 kgs 0.34 bar 3.0 m 1/2 16.5 lbs 5 psi 10 ft 450 mm 12.7 mm 7.5 kgs 0.34 bar 3.0 m Seals Most Types of Sewer & Water Pipes Seal Drains in Flood Prone Basements Plain End Pipe Bell & Spigot End Pipe 37

ME Series: Aluminum Mechanical Pipe Plugs User Friendly Exceeds Industry Standards Fits Up Inside Pipe Long Extension T-Handle Large Test-Thru Port with Separate Read Back Port Example: ME-12 Example: ME-12B ME-6 ME-6B ME-8 ME-8B ME-10 ME-10B ME-12 ME-12B ME-15 ME-15B ME-18 ME-18B ME Series: Aluminum Mechanical Pipe Plugs MAX ALLOWABLE PIPE SIZE BYPASS & READ BACK PRESSURE (I.D) BACK PORT WEIGHT AIR WATER 4.0 lbs 5 psi - 150 mm 1.8 kgs 0.34 bar 1/4 & 1/4 4.0 lbs 5 psi 150 mm 6.4 mm & 6.4 mm 1.8 kgs 0.34 bar 8.0 6.0 lbs 5 psi - 200 mm 2.7 kgs 0.34 bar 8.0 1/4 & 3/4 6.0 lbs 5 psi 200 mm 6.4 mm & 19.1 mm 2.7 kgs 0.34 bar 10.0 8.0 lbs 5 psi - 250 mm 3.6 kgs 0.34 bar 10.0 1/4 & 3/4 8.0 lbs 5 psi 250 mm 6.4 mm & 19.1 mm 3.6 kgs 0.34 bar 12.0 10.0 lbs 5 psi 30 ft - 300 mm 4.5 kgs 0.34 bar 9.1 m 12.0 1/4 & 3/4 10.0 lbs 5 psi 30 ft 300 mm 6.4 mm & 19.1 mm 4.5 kgs 0.34 bar 9.1 m 15.0 15.0 lbs 5 psi 25 ft - 375 mm 6.8 kgs 0.34 bar 7.6 m 15.0 1/4 & 3/4 15.0 lbs 5 psi 25 ft 375 mm 6.4 mm & 19.1 mm 6.8 kgs 0.34 bar 7.6 m 18.0 lbs 5 psi 20 ft - 450 mm 8.2 kgs 0.34 bar 6.1 m 1/4 & 3/4 18.0 lbs 5 psi 20 ft 450 mm 6.4 mm & 19.1 mm 8.2 kgs 0.34 bar 6.1 m Larger Sizes Available! Call 800.575.8448 Mechanical Plugs 38

Gas Monitors Related Underground Other Equipment GasAlert MicroClip Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g) Simple one-button operation Standard datalogger (16 hours) and eventlogger (10 events) Durable, stainless steel alligator clip Integral concussion-proof boot for the most rugged environments Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane) Powered by a lithium polymer battery (run-time typically 12 hours;recharge in less than 3 hours) Provides 95 db alarm tone and bright wide-angled alarm bars Equipped with internal vibrating alarm for high noise areas Backlight: in alarm (auto) and on demand reactivation Four alarm levels: Instant Low and High Alarm for all gases;twa (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm) Simple automatic calibration procedure Fully compatible with BW s MicroDock II automatic test and calibration system Records TWA, STEL and maximum exposures to gas and displays readings on command User selectable options include: confidence beep, latching alarm, calibration due date, bump due date, SAFE display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions GasAlert Max XT The NEW GasAlertMax XT portable and multi-gas detector simultaneously monitors and displays up to four gases including hydrogen sulfide (H2S) carbon monoxide (CO), oxygen (O2) and combustibles (%LEL). The compact and field tough GasAlertMax XT features a non-intrusive integrated sampling pump designed for performance, reliability and ease-of-use. SmartSample pump technology improves remote sampling result accuracy and ensures a consistent, uniform flow. One-button operation guarantees ease of use even while wearing gloves. Tamper-proof, user adjustable options enable the instrument to be customized to suit your specific application. Features Integrated sampling pump SmartSample technology and powerful diaphragm pump provide reliable block detection and consistent, uniform flow Easy-to-read, multi-language LCD displays all four gas concentrations (H2S, CO, O2 and combustibles) simultaneously Visual, vibrating and audible alarm indicators Low, High, TWA (time weighted average) and STEL (short-term exposure limit) alarms LCD icons help with fast and easy notification of detector operation Built-in concussion-proof boot Simple auto-calibration procedure Rechargeable batteries provide enough power for a 13-hour shift Best in class block detection with semi-conductor pressure sensor Easy, one-button interface for simple operation Flexible user options minimize training Tamper-proof field operation Multi-language support in English, French, German, Spanish and Portuguese Compatible with MicroDock II automated test and calibration system Available for Rent or Sale! Our Calibration Center 39

Ventilation Blowers Centrifugal Blowers Available for Rent or Sale! Perfect for remote locations where electricity is unavailable, this gasoline-powered, 3 1/2 hp blower offers high flow rates. The 8 ports and steel guards provide safety and the polyethylene housing with builtin handle offers durability and convenience. It is designed with a sturdy metal base that minimize blower rocking and offers greater stability. Two quarts of gasoline will power 2-3 hours of running time. Blower includes 5 foot exhaust hose extension. Axial Blowers This versatile system features the 8 COM-PAX-IAL blower with canister and your choice of 15 or 25 ducting. This lightweight unit is designed with the quick-connect clipping system which allows workers to attach the canister, tools-free, to the input side for powerful extraction or output side for ventilation. The 15 or 25 ducting stores conveniently within the canister. Special design features include blower and canister built-in carry handles, built-in On/Off switch and Safety orange coloration. Saddle Vents Taking up a minimum amount of space, the Saddle Vent allows workers easy access in and out of confined spaces. Ducting can be attached to the top and bottom of the Saddle Vent which comes in a tank version or manhole style. Saddle Vent is a registered trademark of Air Systems International, Inc.: Saddle Vent device is protected under U.S.Patent Nos. 4,974,956, 4,982,653 and foreign patents. Related Underground Equipment Blower Ducting 4 different diameters: 8, 12, 16 and 20. The 8 ducting is available in 6, 15 and 25 lengths. The 12, 16 and 20 are available in 15 and 25 lengths. Lightweight and retractable, this ducting is designed for maximum air handling capabilities and built for dual direction flow with minimum friction loss. Vinyl and polyester materials with PVC coating make this single ply duct stand up to any rugged environment. The noncollapsible design and yellow with black weather strip for visibility on the job, also meets ASTM 227 specs. 40

Confined Space Entry Available for Rent or Sale! Confined Space Entry Kit Contains tripod, 60 winch and mounting bracket. Also includes tripod bag and equipment bag for storage and transport. Tripod is adjustable from 6 to 11 in height, is constructed with rugged, lightweight aluminum and features an integral stainless steel pulley. 60 winch features 3/16 galvanized steel cable, a double-locking swivel snap hook and is fully rated for personnel and equipment. Equipment bags are constructed with reinforced nylon fabric and are highly resistant to weather, tears and abrasion. Meets the requirements of OSHA 1926 and ANSI Z359. Related underground Equipment Journeyman Harness Journeyman vest-style, industrial-grade full body harness with back and shoulder D-rings for fall arrest and retrieval. Built with extra heavy-duty webbing and rated for individuals up to 400 lbs. Three D-rings (back and shoulder) 5-point adjustability 9-position, heavy-duty tongue buckle leg straps 10 StayPut shoulder pads Heavy-duty BackStrap 2 Lanyard Keepers 7,000 lb. heavy-duty polyester webbing 60 3-Way Recovery SRL 60 DuraTech 3-way recovery unit is a fully featured SRL that includes an integral winch for use in confined space applications. It can be used for rescue and retrieval and can also be used to assist in lowering personnel to their work position. Features galvanized steel cable and cast and CNC machined aluminum housing and drum. The internal brake is constructed with a hard-wearing bronze ratchet center and pawls with an alloy steel pressure plate. The integral recovery mechanism utilizes an aluminum winch gear and arm with a steel handle. Also features the DuoTech load-indicating snap hook for attachment to the back D-ring of your full body harness. 3/16 Galvanized steel cable has a tensile strength of 4,000 lbs. Aluminum housing and drum are durable, lightweight and resistant to corrosion. Housing features built-in carry handle. High-strength aluminum-alloy main shaft for lighter weight. Spring and ball buffer assembly prevents lock-up from free-wheeling. Winch mechanism is rated for personnel only. Includes free tag line to prevent free-wheeling. Fully serviceable, re-certification required every two years. Reduces arrest forces to less than 900 lbs. Weighs only 37 lbs. Meets the requirements of OSHA 1926 and ANSI Z359. 41

Lasers Available for Rent or Sale! Vertex Slope Laser The VERTEX Slope Laser System is a high performance rotating laser that is designed for all general construction and agricultural leveling tasks. It is ideal for slope applications such as excavating, pipe laying, septic systems, sloped pads and fields, embankments, and drainage. As a flat laser, it can be used for checking grade, elevation setting, foundations, footings, and concrete forms. The system allows an operator to take accurate, self-leveled elevation measurements up to 1250 feet away with a laser detector. Grades of up to 25% can be set into the laser in increments of.01%. An optional compound grade adapter can be added for use in dual slope applications. The tripod mounted laser sends a 360 plane of laser light over the entire work area. The laser light is picked-up by the CYCLONE hand held or rod mounted laser detector which allows elevation control to be a one man operation. Multiple detectors may be used simultaneously from the same laser set-up. Additional Features Include: Electronic Self-leveling - eliminates turning leveling screws. Selectable Speed - 600 RPM for general use and 1200 RPM for use with BULLSEYE precision machine control systems. Height of Instrument (HI) Alert - prevents errors if the laser is bumped. Full 36 month Warranty - the industry s best. Arrow 2 Pipe Laser The ARROW 2 pipe laser provides the utility contractor with a rugged, reliable tool that stands up to the demands of tough jobsite conditions and has the features required to lay pipe fast and accurately. Related Underground Equipment High Power - the most power allowed by law, near 5 milliwatts, produces a bright red spot. Accurate - On grade to ±1/16 inch at 100 ft. Rugged - All metal construction, heavy-duty cables & accessories. Remote Line Control - Set line from either end of the pipe. Totally Waterproof - Purged with nitrogen. 24 Hour Use on 4 Hour Charge - Quick charging keeps you up and running. 12-volt power cable is included just in case. Self-leveling throughout the entire grade range - does not require help to get to the higher grade settings. 42

Magnetic Locators & Saw Blades Magnetic Locators Available for Rent or Sale! DML2000 Magnetic Locators Related Underground Equipment The state-of-the-art, DML2000 Magnetic Locator packs all of its sophisticated electronics in an incredibly light 1.6-lb package. Experienced MAG users will appreciate the LOW battery indicator; no more wondering if the batteries are low and you re missing targets. In side-by-side comparison tests with other magnetic locators, the DML2000 outperformed all the competition. Using the DML2000 is the fastest, and easiest way to pinpoint buried survey markers, septic tanks, iron water and gas pipes, water valves, water meters and any other ferrous object buried under dirt, asphalt, water, snow or ice. Saw Blades Saw Blades for Asphalt, Concrete, or General Purpose Handheld High Speed Saw Blades Low, Medium & High Powered Walk Behind Saw Blades 12 & 14 Diameters Long Life 43

Pipe Creeper & Mud Cart Pipe Creeper Move Easier through Small Pipe More Comfortable - Foam Covered Holes in Each End for Rope or Tether Heavy Duty 4 Wheels Mud Cart Available for Rent or Sale! Used to Remove Mud & Debris from Pipe without Worker having to Travel Back & Forth Use to Transfer Morter from Joint to Joint Heavy Duty 6 Wheels Related Underground Equipment 44

Deflection Gauges & Proving Rings Example: SDR-3550-8 Deflection Gauges Lightweight T6061 Aluminum Construction Available in Steel High Clearance to Avoid Getting Stuck on Debris Permanently Marked with Size & Deflection - Won t Scrape Off - Letters Cut into Fins One Piece Forged Eyebolts Snap-Lock Fins No Tools Needed - No Bolts, Nuts, or Pins! Fits down 24 Manholes Example: PR-2650-8 SDR 26 PIPE 5% DEFLECTION 7.5% DEFLECTION DEFLECTION GAUGE PROVING RING FINISHED DIAMETER DEFLECTION GAUGE PROVING RING FINISHED DIAMETER SDR-2650-6 PR-2650-6 5.33 5.19 SDR-2675-6 PR-2675-6 135.4 mm 131.8 mm SDR-2650-8 PR-2650-8 7.11 6.93 SDR-2675-8 PR-2675-8 180.6 mm 176.0 mm SDR-2650-10 PR-2650-10 8.87 8.64 SDR-2675-10 PR-2675-10 225.3 mm 219.5 mm SDR-2650-12 PR-2650-12 10.55 10.27 SDR-2675-12 PR-2675-12 268.0 mm 260.9 mm SDR-2650-15 PR-2650-15 12.90 12.56 SDR-2675-15 PR-2675-15 327.7 mm 319.0 mm SDR-2650-18 PR-2650-18 15.76 15.34 SDR-2675-18 PR-2675-18 400.3 mm 389.6 mm SDR-2650-21 PR-2650-21 18.57 18.08 SDR-2675-21 PR-2675-21 471.7 mm 459.2 mm SDR-2650-24 PR-2650-24 21.36 20.80 SDR-2675-24 PR-2675-24 542.5 mm 528.3 mm SDR-2650-27 PR-2650-27 23.51 22.89 SDR-2675-27 PR-2675-27 597.2 mm 581.4 mm SDR-2650-30 PR-2650-30 27.32 26.61 SDR-2675-30 PR-2675-30 693.9 mm 675.9 mm Any size not on this chart is custom & will be made to customer specifications SDR 35 PIPE 5% DEFLECTION 7.5% DEFLECTION DEFLECTION GAUGE PROVING RING FINISHED DIAMETER DEFLECTION GAUGE PROVING RING FINISHED DIAMETER SDR-3550-4 PR-3550-4 3.70 3.60 SDR-3575-4 PR-3575-4 94.0 mm 91.4 mm SDR-3550-6 PR-3550-6 5.46 5.31 SDR-3575-6 PR-3575-6 138.7 mm 134.9 mm SDR-3550-8 PR-3550-8 7.28 7.09 SDR-3575-8 PR-3575-8 184.9 mm 180.1 mm SDR-3550-10 PR-3550-10 9.08 8.84 SDR-3575-10 PR-3575-10 230.6 mm 224.5 mm SDR-3550-12 PR-3550-12 10.79 10.51 SDR-3575-12 PR-3575-12 274.1 mm 267.0 mm SDR-3550-15 PR-3550-15 13.20 12.86 SDR-3575-15 PR-3575-15 335.3 mm 326.6 mm SDR-3550-18 PR-3550-18 16.13 15.70 SDR-3575-18 PR-3575-18 409.7 mm 398.8 mm SDR-3550-21 PR-3550-21 19.00 18.50 SDR-3575-21 PR-3575-21 482.6 mm 469.9 mm SDR-3550-24 PR-3550-24 20.87 20.32 SDR-3575-24 PR-3575-24 530.1 mm 516.1 mm SDR-3550-27 PR-3550-27 24.06 23.43 SDR-3575-27 PR-3575-27 611.1 mm 595.1 mm Any size not on this chart is custom & will be made to customer specifications Proving Rings Available for All Sizes Size & Deflection Cut into Ring - Will not Scrape Off Custom Sizes & Specs Always Available on Deflection Gauges & Proving Rings! Available for Rent or Sale! 45

Inflation Ropes/Hoses 123 Series LENGTH 123-10 10.0 3.1 m 123-20 20.0 6.1 m 123-30 30.0 9.1 m 123-40 40.0 Longer Lengths Available 1/4 ID Inflation Hose Inside of Poly-Rope 60 psi Gauge Comes Standard with 1/4 Male Threads on Plug End 123HP Series LENGTH 123-10HP 10.0 3.1 m 123-20HP 20.0 6.1 m 123-30HP 30.0 9.1 m 123-40HP 40.0 Longer Lengths Available For Use with 800/825/850 Series High Pressure Plugs 1/4 ID Inflation Hose Inside of Poly-Rope 300 psi Gauge Comes Standard with 1/4 Male Threads on Plug End Available for Rent or Sale! 125 Series LENGTH 125-10 10.0 3.1 m 125-20 20.0 6.1 m 125-30 30.0 9.1 m 125-40 40.0 Longer Lengths Available 1/4 ID Inflation Hose Inside of Poly-Rope 60 psi Gauge Quick Dump Ball Valve Comes Standard with 1/4 Male Threads on Plug End Ropes / Hoses / Accessories 119 Series LENGTH 119-10 10.0 3.1 m 119-20 20.0 6.1 m 119-30 30.0 9.1 m 119-40 40.0 Longer Lengths Available For Use with 600/650-2036 & Above 3/4 ID Inflation Hose with 1/4 ID Read Back Hose Inside of Poly-Rope 60 psi Gauge Comes Standard with 3/4 & 1/4 Female Swivels on Plug End 275 Series LENGTH 275-10 10.0 3.1 m 275-20 20.0 6.1 m 275-30 30.0 9.1 m 275-40 40.0 Longer Lengths Available For Use with 280 Series High-Flow/ No-Flow - Must Use for Warranty 60 psi Gauge for Outer Bladder 30 psi Gauge for Inner Bladder Pressure Relief Valve to Protect Inner Bladder from Over Inflation 46

Parts & Accessories DESCRIPTION DESCRIPTION Gauge Block Assemblies Quick Couplers 123-1 Gauge Block Assembly 0-60 psi 135-04F 1/4 F x 1/4 FIP 135-04FM 1/4 F x 1/4 MIP 125-1 Gauge Block Assembly with Ball Valve 0-60 psi 135-04M 1/4 M x 1/4 MIP Gauges Ropes / Hoses / Accessories 129-30CB 129-30L 129-15 129-60 0-30 in.hg Vacuum Center Back Connection 0-30 in.hg Vacuum Lower Connection 0- with Rubber Protector 0-60 psi with Rubber Protector 135-0406M 1/4 M x 3/8 MIP 135-12F 135-12M 3/4 Female Dixon 3/4 Male Dixon Safety Pressure Relief Valves 138-25 1/4 138-35 1/4 35 psi 139-12 1/2 12 psi 139-20 1/2 20 psi 130-1 130-2 130-6 Remote Placement Pole & Attachments 1/2 Pole Attachment 5/8 Pole Attachment Remote Placement Telescopic Aluminum Pole (Attachments Sold Seperately) 139-25 1/2 137-1 Inflation Fittings 1/4 M Inflation Fitting 47

Notice to Employers, Contractors & Users All personnel who use or work in close proximity to Plug-It Products pneumatic plugs must be instructed and become familiar with proper installation, handling, and removal procedures. YOUR LIFE MAY DEPEND ON IT! Plug-It Products pneumatic plugs are designed and manufactured with a firm commitment to quality and safety. We have strived to produce and provide the best quality product available. However, we cannot control or predict the unlimited workplace variables that can affect safety conditions. General safety conditions are overwhelmingly the result of workers adhering to and utilizing proper safety practices. Natural rubber plugs are NOT for use in oil, gas, or petroleum applications. UNDERSTAND THAT EVERY JOB IS DIFFERENT and must be carefully examined to insure the safest procedure possible for each circumstance encountered. The safest plug on earth will not save you if it is handled improperly or if safety practices are ignored. Our Safety Manuals are provided as a general guideline only. It is the user s responsibility to comply with any Local, State, and/or Federal Safety Regulation as it pertains to your geographical location or job situation. CAUTION DO NOT STAND DIRECTLY IN FRONT OF A PIPE OR REMAIN IN A MANHOLE WHILE PNEUMATIC PIPE PLUGS ARE IN USE. IF THE PLUG SHOULD FAIL, THE POSSIBILITY OF BODILY INJURY EXISTS. SEE SAFETY MANUAL ABOUT DANGER ZONE! WARRANTY Plug-It Products warrants all of it s plugs against defects of material and workmanship for two (2) years from the purchase date of invoice (all other products carry a one (1) year warranty). Any product having a manufacturer defect in material or workmanship should be returned to Plug-It Products for evaluation. If the item is found to be defective, as stated above, Plug- It Products will repair or replace the product at it s option. Plug-It Products will not accept responsibility for incidental or consequential damages caused by the use or misuse of our products, and it s liability shall in all instances be limited to your actual purchase price of the defective product. There are no warranties (written or oral) which extend beyond the limited warranty set forth herein and all implied warranties of merchantability of fitness are excluded. Plug-It Products has representatives that are willing to serve you in over 40 countries. For your nearest representative call 800-575-8448 or go to www.plugitproducts.com and click on Distributor Locator. 48

& Conversions Please refer to the Plug-It Products Safety Manual for detailed instructions. The Safety Manual can be downloaded from www.plugitproducts.com or call 800-575-8448 to have one mailed.»» Never use a plug in pipe diameters other than what the plug is designed for.»» If a plug fails, it could result in DEATH, BODILY INJURY, AND/OR PROPERTY DAMAGE!»» Read and understand the Plug-It Products Safety Manual before using a plug, even if you have been using plugs for 25 years!!»» Use the correct Safety Inflation Rope/Hose assembly to operate the plug outside of the DANGER ZONE.»» Know the correct inflation pressure before placing the plug in the pipe.»» PSI air is the same as PSI water, the forces are the same. However, air is compressible, making air pressure more dangerous.»» Always use blocking to restrain the plug, keeping the plug in place.»» Never deflate or remove a plug when there is pressure behind the plug.»» Never use a plug that shows cuts, cracks, tears or holes in the plug s surface.»» Always double plug, never rely on just one single plug.»» The gauge on the Safety Inflation Rope/Hose is to monitor the pressure in the plug while in use, not just for inflation of the plug. Check the gauge to monitor the inflation pressure every 4 hours. Calculating Thrust in a Pipe 1) Determine inside diameter of pipeline in inches (divide by 2 for Radius) 2) Determine maximum back pressure 3) Calculate thrust pressure (Radius x Radius x π x PSI) Conversions FROM: TO: MULTIPLY BY: Example: Pipe Size = 30 Radius = 15 π = 3.14 Back Pressure = 10 psi 15 x 15 x 3.14 x 10 psi = 7,065 Pounds of Thrust Pounds per Square Inch (psi) Feet of Water (Head) Bars 0.069 Pounds per Square Inch (psi) 0.4335 Feet of Water (Head) Inches of Mercury 0.8825 Inches Millimeters 25.4 Feet Meters 0.3048 Pounds Kilograms 0.4536 Radius X Radius X π X Psi = Pounds of Thrust 49

Plug-It Products has gone Green! Our environment is important to Plug-It Products. By installing a 64 Kilowatt Photovoltaic Solar System, which produces 100% of our electric needs, we feel that we are doing our share to help protect the environment and reduce emissions on a daily basis. MISSION STATEMENT Plug-It Products strives to be the number one pipe and sewer plug manufacturer in the world by setting new standards in design, durability, and quality of our products, with an impeccable reputation built on honesty, good value, and a safe environment in which our craftsman can improve their quality of life. 50

PLUG-IT PRODUCTS - A Different Kind of Plug Company - (800) 575-8448 940 East Pine Street Lodi, CA 95240 Fax: (209) 334-1671 www.plugitproducts.com Lodi, CA Newark, DE Lake Elsinore, CA Humble, TX Southern California Warehouse (951) 471-8280 18540 Pasadena St. Lake Elsinore, CA 92530 Texas Warehouse (281) 540-5785 1920 Treble Drive, Unit B1 Humble, TX 77338 CATALOG #9 Delaware Warehouse (302) 266-7900 20 Shea Way, Suite 203 Newark, DE 19713