E TREME ABRASIVES CUT - GRIND - FINISH CATALOGUE 2017R
ABOUT EXTREME ABRASIVES ABOUT EXTREME ABRASIVES Based in Ontario, Canada, Extreme Abrasives was founded in 2004 with a commitment to providing quality and cost-effective solutions for metal finishing. Since then we have expanded our manufacturing and established strategics partnership with other companies in abrasive industry. Today we offer a variety of products to satisfy any and all abrasive needs from constriction to metal and wood finishing. We are proud of our expertise in the abrasives industry. Our experienced and knowledgeable staff catters the needs of every customer by offering our impressive selection of products, competitive prices and unmatched technical support. In addition, our products are manufactured using only the highest-quality components from around the world. We are a customer-oriented company that is always ready to provide you with products that are: Tailored to meet your specific requirements Of the highest quality and standards Competitively-priced and affordable OUR MISSION It is our mission to help our customers maintain manufacturing in North America by focusing on the following goals: Maintain a diverse product selection Manufacture as many products as possible at our factory in Canada Use the top quality components and the efficient manufacturing process Provide dependable service to all customers Provide a fulfilling environment to our employees It is our commitment to these goals that makes working with us an enjoyable experience from start to finish. We look forward to helping you achieve success in your endeavors. OUR COMPANY VALUES AND GOALS WORKPLACE SAFETY AND EMPLOYEE COMMITMENT - We care about providing our employees with a safe work environment and fair pay. PRODUCT QUALITY - We care about meeting or exceeding product quality standards. CUSTOMER SERVICE - We care about delivering quality products on time. PRODUCTIVITY - We care about having up-to-date production equipment to boost our competitive edge. PROFITABILITY - We care about our future by running a profitable company. EASY WAYS TO PLACE AN ORDER PHONE: 905 282 1313 FAX: 905 282 1313 E-MAIL: sales@extremeabrasives.com OVER THE WEB: (coming soon) We accept credit card payment. OUR PARTNERS: abc 2
TABLE OF CONTENTS ABOUT EXTREME ABRASIVES...2 GENERAL SAFETY PRINCIPLES...4 CUTTING AND GRINDING CUT-OFF WHEELS - DIE GRINDERS...5 CUT-OFF WHEELS - HAND-HELD GRINDERS...5 CUT-OFF WHEELS - CHOP SAW...6 CUT-OFF WHEELS - STATIONARY SAW...6 CUT-OFF WHEELS - HIGH SPEED SAWS...6 CUTTING AND GRINDING WHEELS...7 GRINDING WHEELS...7 BLENDING FLAP DISCS...8 RESIN FIBRE DISCS... 11 QUICK-CHANGE MINI DISCS...12 TRIM KUT DISCS...13 SPIRAL-RIBBED DISCS...13 CUP WHEELS...13 STRIP AND CLEAN...14 SANDING DISCS...14 ABRASIVE BELTS...14 ABRASIVE SHEETS...15 ABRASIVE SHOP ROLLS...15 FINISHING QUICK-CHANGE SURFACE CONDITIONING DISCS...16 HAND PADS...16 CONVOLUTED DISCS...17 UNITIZED WHEELS...18 CARBIDE TOOLS FLOOR GRINDING DISC...18 FLOOR GRINDING BLOCKS...19 FLOOR GRINDING RING...19 SANDING DISC...19 SOLID GRINDING DISC...19 SANDING TRIANGLE...20 SANDING DISCS/PADS FOR ORBITAL SANDERS...20 SANDING PADS/PLATES FOR HAND TOOLS...21 FILES...21 SANDING TROWEL, TROWEL RASP AND TROWEL RASP SAW...21 CARBIDE RECIPROCATING SAW BLADES...22 BRICK AND BLOCK CARBIDE HAND SAWS...23 TUCK POINTING CARBIDE ROUTER BITS...23 CARBIDE TRIMMING DISCS...23 SAW BLADES...23 WIRE BRUSHES DIY EXTREME BRANDED WIRE BRUSHES...24 INDUSTRIAL WIRE BRUSHES...25 DIAMOND PRODUCTS SMALL DIAMETER DIAMOND BLADES...26 DIAMOND CUP WHEELS...27 DIAMOND BLADES...28 ACCESSORIES...29 HIRETECH FLOOR SANDERS AND FLOOR SANDING PRODUCTS FLOOR SANDERS AND STEAM WALLPAPER STRIPPERS...30 FLOOR SANDING PRODUCTS...31 HIRETECH PARTS LIST...32 TERMS & CONDITIONS...34 PRODUCT WARRANTY...35 TABLE OF CONTENTS 3
SAFETY All machines that use coated products can be dangerous and cause serious injury if they are not properly used and if safety procedures are not followed. Although maximum speeds are provided for each product, it is highly recommended that you use speeds recommended by the power tool manufacturer. Do not use sizes other than those for which the power tool is designed for! Abrasives deliver best performance when used in normal room temperature and humidity. Excessive temperature and humidity can cause abrasives to fail. Use extra caution when grinding in extremely cold or hot conditions. SAFETY INSTRUCTIONS Eye protection must be worn by all operators and other personnel in the grinding area Wear a dust and fumes mask Do not exceed maximum operating speeds Store abrasives under the manufacturer s recommendation conditions Make sure that you are using proper abrasive tools for your application Never modify abrasive tools from its original form Keep all safety guards in place Read all instructions provided by the manufacturer before operating Observe and follow safety instructions for the intended work area Safe use of abrasives requires strict adherence to the guidelines set in ANSI standard Z87.1 Occupational Eye and Face Protection MANDATORY PICTOGRAMS GENERAL SAFETY PRINCIPLES Use for face grinding Wear ear protection complying with EN 352 recommended for all applications where the workpiece or machine is hand-held, irrespective of the noise level. Wear gloves. Minimum protection level of EN 388 Category 2 recommended. PROHIBITION PICTOGRAMS Not suitable for wet grinding Not permitted for hand-held and manually guided grinding Only permitted with back-up pad Wear a dust mask complying with EN149 recommended for dry grinding processes even if extraction systems are provided Use face shield Not permitted for face grinding Wear eye protection. Minimum protection level of EN 166 Grade B recommended. Read the instructions Wear an apron Do not use if damaged OPERATING INSTRUCTIONS Read safety instructions before using abrasives Allow tools to reach operating speed before you start grinding For best results, grind at an angle recommended for the type of disc that you are using More grinding pressure results in aggressive grinding while less pressure produces a smoother finish ; in other words, do not use excessive pressure when grinding. Do not use excessive pressure when grinding Using grinding angles greater than which is recommended and/or grinding corners can cause premature and uneven wear When grinding keep the power tool in motion for best results MAXIMUM OPERATING SPEEDS All the abrasive discs are supposed to be used at the maximum speed shown on the labels and packaging. The color of the central stripe changes according to the maximum peripheral speed allowed. Blue (50 m/s), Yellow (63 m/s), Red (80 m/s), Green (100 m/s). The maximum speed is shown both in rpm and m/s. Never exceed the speed shown on the label. OUTSIDE DIAMETER (inch) MAX. RPM at 50 (m/s) MAX. RPM at 63 (m/s) MAX. RPM at 80 (m/s) MAX. RPM at 100 (m/s) 2" 18,950 23,650 30,000 37,500 3" 12,000 15,100 19,100 23,900 4" 9,400 11,800 15,000 18,800 4 1/2" 8,350 10,500 13,300 16,650 5" 7,650 9,650 12,250 15,300 6" 6,400 8,050 10,200 12,700 7" 5,350 6,700 8,500 10,650 8" 4,700 5,900 7,500 9,400 9" 4,200 5,250 6,650 8,350 12" 3,200 4,050 5,100 6,400 14" 2,750 3,450 4,400 5,500 16" 2,400 3,050 3,850 4,800 20" 1,950 2,450 3,100 3,850 4
CUT-OFF WHEELS - DIE GRINDERS CUT-OFF WHEEL METAL / SS Designed and manufactured to provide the great cutting performances on all metals. Wheels specifically made for air operated portable grinders. CUTTING WHEEL FLAT T1 2" X 1/32" X 3/8" DRPEEX2103M 3" X 1/32" X 3/8" DRPEEX3103M 3" X 1/16" X 3/8" DRPEEX3163M 4" X 1/32" X 3/8" DRPEEX4103M CUT-OFF WHEELS - HAND-HELD GRINDERS ENERGY CUT-OFF WHEEL METAL / SS ENERGY CUT-OFF WHEEL METAL / SS Reinforced flat T1 cutting wheels made with top quality aluminum oxide grain. Excellent performance at a competitive price. Contaminate free. Long life. XFORCE CUT-OFF WHEEL SS / METAL CUTTING WHEEL FLAT T1 CUTTING WHEEL FLAT T1 4" X 1/16" X 5/8" DRPEEX4165M 4 1/2" X.045" X 7/8" DRPEMT2127M 4 1/2" X 1/16" X 7/8" DRPEMT2167M 5" X.045" X 7/8" DRPEMT5127M 6" X.045" X 7/8" DRPEMT6127M 7" X 1/16" X 7/8" DRPEMT7167M Reinforced flat T1 cutting wheels. Self-sharpening grain for high performance cutting on stainless steel and steel. 4 1/2" X.045" X 7/8" DRPXMT2167M 5" X.045" X 7/8" DRPXMT5167M 6" X.045" X 7/8" DRPXMT6167M 7" X 1/16" X 7/8" DRPXMT7167M REVOLUTION CUT-OFF WHEEL SS / METAL / SOFT METAL Reinforced flat T1 cutting wheels. Proprietary new abrasive spherically shaped. Self-sharpening grain is bonded using latest technology. Reinforced depressed centre T27 cutting wheels made with top quality aluminum oxide grain. Excellent performance at a competitive price. Contaminate free. Long life. XFORCE CUT-OFF WHEEL SS / METAL CUTTING WHEEL DEPRESSED CENTRE T27 CUTTING WHEEL DEPRESSED CENTRE T27 4" X 1/16" X 5/8" DRDEEX4165M 4 1/2" X.045" X 7/8" DRDEMT2127M 5" X.045" X 7/8" DRDEMT5127M 6" X.045" X 7/8" DRDEMT6127M 7" X 1/16" X 7/8" DRDEMT7167M Reinforced depressed centre T27 cutting wheels. Self-sharpening grain for high performance cutting on stainless steel and steel. 4 1/2" X.045 X 7/8" DRDXMT2167M 5" X.045 X 7/8" DRDXMT5167M 6" X.045 X 7/8" DRDXMT6167M 7" X 1/16" X 7/8" DRDXMT7167M REVOLUTION CUT-OFF WHEEL SS / METAL / SOFT METAL Reinforced depressed centre T27 cutting wheels. Proprietary new abrasive spherically shaped. Self-sharpening grain is bonded using latest technology. CUTTING AND GRINDING CUTTING WHEEL FLAT T1 CUTTING WHEEL DEPRESSED CENTRE T27 4 1/2" X.045 X 7/8" DRPRMT2127M 5" X.045" X 7/8" DRPRMT5127M 6" X.045" X 7/8" DRPRMT6127M 7" X 1/16" X 7/8" DRPRMT7167M 4 1/2" X.045 X 7/8" DRDRMT2127M 5" X.045" X 7/8" DRDRMT5127M 6" X.045" X 7/8" DRDRMT6127M 7" X 1/16" X 7/8" DRDRMT7167M Other sizes and thickness available. Please contact Customer Service 5
CUT-OFF WHEELS - HAND-HELD GRINDERS ENERGY CUT-OFF WHEEL METAL / SS CUT-OFF WHEEL METAL / SS CUTTING WHEEL DEPRESSED CENTRE T27 9 X 1/8 X 7/8 DRDEMT9307M CUTTING WHEEL DEPRESSED CENTRE T27 5 X 3/32 X 7/8 DRDEEX5247M CUTTING WHEEL FLAT T1 7 X 1/8 X 5/8 DRPEEX7305M CUT-OFF WHEEL FOR SOFT METAL CUTTING WHEEL DEPRESSED CENTRE T27 4 1/2 X.045 X 7/8 DRDPEX2127H 5 X.045 X 7/8 DRDPEX5127H CUT-OFF WHEELS CUTTING WHEEL FLAT T1 4 1/2 X.045 X 7/8 DRPPEX2127H 5 X.045 X 7/8 DRPPEX5127H Reinforced flat T1 cutting wheels specifically made for stationary machines. For precise and contorted cutting. Available for metal and masonry cutting. CUTTING AND GRINDING CHOP SAW CUTTING WHEEL FLAT T1 USAGE 12" X 3/32" X 1" DRCPEX2251M METAL GENERAL USE 14" X 3/32" X 1" DRCPEX4271M METAL GENERAL USE STATIONARY SAW CUTTING WHEEL FLAT T1 USAGE 16 X 5/32 X 1 DRCSEX6401G3 CONCRETE 3 REIN 18" X 3/16" X 1 DRCSEX8451K3 METAL 3 REIN 20 X 3/16 X 1 DRXSEX0451K METAL 3 REIN 20 X 3/16 X 1 DRXSEX0451GY3 CONCRETE/DUCTLE 3 REIN 20 X 3/16 X 1 DRXSEX0451G3 MASONRY 3 REIN CUT-OFF WHEELS - HIGH SPEED SAWS Triple reinforced for maximum safety. Wheels specifically made for high speed machines. General purpose fast cutting. CUTTING WHEEL FLAT T1 USAGE 12" X 1/8" X 1" DRXSEX2301K3 METAL A24R 3 REIN 12" X 1/8" X 20mm DRXSEX2302K3 METAL A24R 3 REIN 12" X 1/8" X 1 DRXSEX2301GY3 CONCRETE AC24R 3 REIN 12" X 1/8" X 20mm DRXSEX2302GY3 CONCRETE AC24R 3 REIN 14" X 1/8" X 1" DRXSEX4301K3 METAL A24R 3 REIN 14" X 1/8" X 20mm DRXSEX4302K3 METAL A24R 3 REIN 14" X 1/8" X 1 DRXSEX4301GY3 CONCRETE AC24R 3 REIN 14" X 1/8" X 20mm DRXSEX4302GY3 CONCRETE AC24R 3 REIN 16" X 5/32" X 1 DRXSEX6401K3 METAL A24R 3 REIN 16" X 5/32" X 20mm DRXSEX6402K3 METAL A24R 3 REIN 16 X 5/32 X 1 DRXSEX6401G3 CONCRETE AC24R 3 REIN CUTTING WHEEL FLAT T1 USAGE 14" X 5/32" X 1" DRXPMM4381R RAIL CUTTING + STANLESS 6
CUTTING AND LIGHT-GRINDING WHEELS (Triple Fiberglass Reinforcement) ENERGY CUTTING AND LIGHT-GRINDING WHEEL Depressed centre T27 cutting and grinding wheel made with top quality aluminum oxide. Triple reinforced for maximum safety. CUTTING AND GRINDING WHEEL DEPRESSED CENTRE T27 METAL / SS 4 1/2" X 5/32" X 7/8" DRDEMT2407K 4 1/2" X 5/32" X 5/8-11 DRDEMT2407K5811 5" X 5/32" X 7/8" DRDEMT5407K 5" X 5/32" X 5/8-11 DRDEMT5407K5811 CUTTING AND GRINDING WHEEL DEPRESSED CENTRE T27 GRINDING WHEELS SS / METAL 4 1/2" X 5/32" X 7/8" DRDEMT2407I 4 1/2 X 5/32 X 5/8-11 DRDEMT2407I5811 5 X 5/32 X 7/8 DRDEMT5407I 5 X 5/32 X 5/8-11 DRDEMT5407I5811 ENERGY GRINDING WHEEL Reinforced depressed centre T27 grinding wheels made with top quality aluminum oxide. GRINDING WHEEL DEPRESSED CENTRE T27 METAL / SS 4 1/2 X 1/4 X 7/8 DRDEMT2607K 4 1/2 X 1/4 X 5/8-11 DRDEMT2607K5811 5 x 1/4 x 7/8 DRDEMT5607K 5 x 1/4 x 5/8-11 DRDEMT5607K5811 6 x 1/4 x 7/8 DRDEMT6607K 6 X 1/4 X 5/8-11 DRDEMT6607K5811 7 X 1/4 X 7/8 DRDEMT7607K 7 X 1/4 X 5/8-11 DRDEMT7607K5811 GRINDING WHEEL DEPRESSED CENTRE T27 SS / METAL 4 1/2" X 1/4" X 7/8" DRDEMT2607I 4 1/2 X 1/4 X 5/8-11 DRDEMT2607I5811 5 X 1/4 X 7/8 DRDEMT5607I 5 X 1/4 X 5/8-11 DRDEMT5607I5811 6 X 1/4 X 7/8 DRDEMT6607I 6 X 1/4 X 5/8-11 DRDEMT6607I5811 CUTTING AND GRINDING XFORCE GRINDING WHEEL SS / METAL Reinforced depressed centre T27 grinding wheels. GRINDING WHEEL DEPRESSED CENTRE T27 GRINDING WHEEL FOR ALUMINUM Reinforced depressed centre T27 grinding wheels. GRINDING WHEEL DEPRESSED CENTRE T27 4 1/2 X 1/4 X 7/8 DRDXMT8607M 5 X 1/4 X 7/8 DRDXMT5607M 4 1/2" X 1/4" X 7/8" DRDPEX2607H 5" X 1/4" X 7/8" DRDPEX5607H 7
ZirCUT FLAP DISCS Premium zirconia abrasive material made with poly-cotton cloth for best performance on all angle grinders. Fibreglass backing. ZirCUT Flap Discs are manufactured using the highest quality self-sharpening zirconia alumina abrasive material. Suitable for the following materials: carbon steel, stainless steel, heat-treated steels, high speed and tool steels, alloyed steels, sheet metal, cast iron, non-ferrous metals. Available with SAFE LOC quick-change hub. FLAP DISCS T27 FLAT SAFE LOC FLAP DISCS T29 CONICAL SAFE LOC PATENTED PATENTED 24 36 40 4 x 5/8 Z5040027 Z5040037 Z5040047 4 1/2 x 7/8 Z5045027 Z5045037 Z5045047 5 x 7/8 Z5050027 Z5050037 Z5050047 6 x 7/8 Z5060027 Z5060037 Z5060047 7 x 7/8 Z5070027 Z5070037 Z5070047 60 80 120 4 x 5/8 Z5040067 Z5040087 Z5040127 4 1/2 x 7/8 Z5045067 Z5045087 Z5045127 5 x 7/8 Z5050067 Z5050087 Z5050127 6 x 7/8 Z5060067 Z5060087 Z5060127 7 x 7/8 Z5070067 Z5070087 Z5070127 24 36 40 4 x 5/8 Z5040029 Z5040039 Z5040049 4 1/2 x 7/8 Z5045029 Z5045039 Z5045049 5 x 7/8 Z5050029 Z5050039 Z5050049 6 x 7/8 Z5060029 Z5060039 Z5060049 7 x 7/8 Z5070027 Z5070037 Z5070047 60 80 120 4 x 5/8 Z5040069 Z5040089 Z5040129 4 1/2 x 7/8 Z5045069 Z5045089 Z5045129 5 x 7/8 Z5050069 Z5050089 Z5050129 6 x 7/8 Z5060069 Z5060089 Z5060129 7 x 7/8 Z5070069 Z5070089 Z5070129 ZirCUT HD (JUMBO) FLAP DISCS Premium zirconia abrasive material made with poly-cotton cloth for best performance on all angle grinders. Fibreglass backing. Also known as JUMBO flap discs. Long life and excellent for blending and finishing. Available with SAFE LOC quick-change hub. BLENDING SAFE LOC FLAP DISCS T27 FLAT PATENTED 24 36 40 4 x 5/8 Z5240037 Z5240047 4 1/2 x 7/8 Z5245027 Z5245037 Z5245047 5 x 7/8 Z5250027 Z5250037 Z5250047 7 x 7/8 Z5270037 Z5270047 60 80 120 4 x 5/8 Z5240067 Z5240087 Z5240127 4 1/2 x 7/8 Z5245067 Z5245087 Z5245127 5 x 7/8 Z5250067 Z5250087 Z5250127 7 x 7/8 Z5270067 Z5270087 Z5270127 FLAP DISCS SAFE LOC T29 CONICAL PATENTED 24 36 40 4 x 5/8 Z5240039 Z5240049 4 1/2 x 7/8 Z5245029 Z5245039 Z5245049 5 x 7/8 Z5250029 Z5250039 Z5250049 7 x 7/8 Z5270039 Z5270049 60 80 120 4 x 5/8 Z5240069 Z5240089 Z5240129 4 1/2 x 7/8 Z5245069 Z5245089 Z5245129 5 x 7/8 Z5250069 Z5250089 Z5250129 7 x 7/8 Z5270069 Z5270089 Z5270129 ZeeCUT FLAP DISCS Premium zirconia abrasive material made with poly-cotton cloth for best performance on all angle grinders. Fibreglass backing. Available with SAFE LOC quick-change hub. FLAP DISCS T27 FLAT SAFE LOC FLAP DISCS T29 CONICAL SAFE LOC PATENTED PATENTED 36 40 60 4 x 5/8 Z4040037 Z4040047 Z4040067 4 1/2 x 7/8 Z4045037 Z4045047 Z4045067 5 x 7/8 Z4050037 Z4050047 Z4050067 6 x 7/8 Z4060037 Z4060047 Z4060067 7 x 7/8 Z4070037 Z4070047 Z4070067 80 120 4 x 5/8 Z4040087 Z4040127 4 1/2 x 7/8 Z4045087 Z4045127 5 x 7/8 Z4050087 Z4050127 6 x 7/8 Z4060087 Z4060127 7 x 7/8 Z4070087 Z4070127 36 40 60 4 x 5/8 Z4040039 Z4040049 Z4040069 4 1/2 x 7/8 Z4045039 Z4045049 Z4045069 5 x 7/8 Z4050039 Z4050049 Z4050069 6 x 7/8 Z4060039 Z4060049 Z4060069 7 x 7/8 Z4070039 Z4070049 Z4070069 80 120 4 x 5/8 Z4040089 Z4040129 4 1/2 x 7/8 Z4045089 Z4045129 5 x 7/8 Z4050089 Z4050129 6 x 7/8 Z4060089 Z4060129 7 x 7/8 Z4070089 Z4070129 8 Other sizes, grits and materials available. Please contact Customer Service
ZeeCUT P FLAP DISCS Premium zirconia abrasive material made with poly-cotton cloth for best performance on all angle grinders. Plastic backing for effortless grinding. Available with SAFE LOC quick-change hub. FLAP DISCS T27 FLAT SAFE LOC FLAP DISCS T29 CONICAL SAFE LOC PATENTED 36 40 60 4 1/2 x 7/8 Z4345037 Z4345047 Z4345067 5 x 7/8 Z4350037 Z4350047 Z4350067 80 120 4 1/2 x 7/8 Z4345087 Z4345127 5 x 7/8 Z4350087 Z4350127 PATENTED 36 40 60 4 1/2 x 7/8 Z4345039 Z4345049 Z4345069 5 x 7/8 Z4350039 Z4350049 Z4350069 80 120 4 1/2 x 7/8 Z4345089 Z4345129 5 x 7/8 Z4350089 Z4350129 EZCUT FLAP DISCS Premium zirconia abrasive material made with poly-cotton cloth for best performance on all angle grinders. Fiberglass backing. More open flaps structure for more aggressive grinding. Excellent performance with lower initial price. Available with SAFE LOC quick-change hub. FLAP DISCS T27 FLAT SAFE LOC FLAP DISCS T29 CONICAL SAFE LOC PATENTED PATENTED RED FURY FLAP DISCS 36 40 60 4 x 5/8 Z3040037 Z3040047 Z3040067 4 1/2 x 7/8 Z3045037 Z3045047 Z3045067 5 x 7/8 Z3050037 Z3050047 Z3050067 7 x 7/8 Z3070037 Z3070047 Z3070067 80 120 4 x 5/8 Z3040087 Z3040127 4 1/2 x 7/8 Z3045087 Z3045127 5 x 7/8 Z3050087 Z3050127 7 x 7/8 Z3070087 Z3070127 Premium ceramic top-size abrasive material for best performance on high power angle grinders. Hi-tech self-sharpening ceramic grit. Fibreglass backing. Extremely tough and long-lasting in coarse grit. Use for heavy grinding, weld blending and chamfering on all steels and hard-to-grind materials. Cool and fast cutting with no loading. Available with SAFE LOC quick-change hub. FLAP DISCS T27 FLAT SAFE LOC PATENTED 36 40 60 4 x 5/8 Z3040039 Z3040049 Z3040069 4 1/2 x 7/8 Z3045039 Z3045049 Z3045069 5 x 7/8 Z3050039 Z3050049 Z3050069 7 x 7/8 Z3070039 Z3070049 Z3070069 80 120 4 x 5/8 Z3040089 Z3040129 4 1/2 x 7/8 Z3045089 Z3045129 5 x 7/8 Z3050089 Z3050129 7 x 7/8 Z3070089 Z3070129 FLAP DISCS T29 CONICAL SAFE LOC PATENTED BLENDING RED FURY HD FLAP DISCS 24 36 40 4 x 5/8 C5540037 C5540047 4 1/2 x 7/8 C5545027 C5545037 C5545047 5 x 7/8 C5550027 C5550037 C5550047 6 x 7/8 C5560037 C5560047 7 x 7/8 C5570037 C5570047 60 80 120 4 x 5/8 C5540067 C5540087 C5540127 4 1/2 x 7/8 C5545067 C5545087 C5545127 5 x 7/8 C5550067 C5550087 C5550127 6 x 7/8 C5560067 C5560087 C5560127 7 x 7/8 C5570067 C5570087 C5570127 Available with SAFE LOC quick-change hub. 24 36 40 4 x 5/8 C5540039 C5540049 4 1/2 x 7/8 C5545029 C5545039 C5545049 5 x 7/8 C5550029 C5550039 C5550049 6 x 7/8 C5560039 C5560049 7 x 7/8 C5570039 C5570049 60 80 120 4 x 5/8 C5540069 C5540089 C5540129 4 1/2 x 7/8 C5545069 C5545089 C5545129 5 x 7/8 C5550069 C5550089 C5550129 6 x 7/8 C5560069 C5560089 C5560129 7 x 7/8 C5570069 C5570089 C5570129 FLAP DISCS T27 FLAT SAFE LOC PATENTED FLAP DISCS T29 CONICAL SAFE LOC PATENTED 36 40 60 4 1/2 x 7/8 C5845037 C5845047 C5845067 5 x 7/8 C5850037 C5850047 C5850067 80 120 4 1/2 x 7/8 C5845087 C5845127 5 x 7/8 C5850087 C5850127 36 40 60 4 1/2 x 7/8 C5845039 C5845049 C5845069 5 x 7/8 C5850039 C5850049 C5850069 80 120 4 1/2 x 7/8 C5845089 C5845129 5 x 7/8 C5850089 C5850129 Other sizes, grits and materials available. Please contact Customer Service 9
TrimCEE FLAP DISCS Premium ceramic top-size abrasive material with polyester cloth for best performance on high power angle grinders. Hi-tech self-sharpening ceramic grit. Trimmable plastic backing for maximum abrasive usage. Extremely tough and long-lasting in coarse grit. Use for heavy grinding, weld blending and chamfering on all steels and hard-to-grind materials. Cool and fast cutting with no loading. Available with SAFE LOC quick-change hub. FLAP DISCS T27 FLAT SAFE LOC PATENTED 36 40 60 80 120 4 1/2 x 7/8 C5T45037 C5T45047 C5T45067 C5T45087 C5T45127 5 x 7/8 C5T50037 C5T50047 C5T50067 C5T50087 C5T50127 6 x 7/8 C5T60037 C5T60047 C5T60067 C5T60087 C5T60127 TrimZEE FLAP DISCS Premium zirconia abrasive material made with poly-cotton cloth for best performance on all angle grinders. Trimmable plastic backing for maximum abrasive usage. Available with SAFE LOC quick-change hub. FLAP DISCS T27 FLAT SAFE LOC PATENTED BLENDING FinishCUT FLAP DISCS 36 40 60 80 120 4 1/2 x 7/8 Z5T45037 Z5T45047 Z5T45067 Z5T45087 Z5T45127 5 x 7/8 Z5T50037 Z5T50047 Z5T50067 Z5T50087 Z5T50127 6 x 7/8 Z5T60037 Z5T60047 Z5T60067 Z5T60087 Z5T60127 Premium surface conditioning material. Use on all angle grinders. Fiberglass backing. Excellent for cleaning and finishing on all material. Available with SAFE LOC quickchange hub. FLAP DISCS T27 FLAT SAFE LOC PATENTED COARSE MEDIUM FINE 4 1/2 x 7/8 F5045C07 F5045M07 F5045F07 5 x 7/8 F5050C07 F5050M07 F5050F07 FLAP DISCS T29 CONICAL SAFE LOC PATENTED COARSE MEDIUM FINE 4 1/2 x 7/8 F5045C09 F5045M09 F5045F09 5 x 7/8 F5050C09 F5050M09 F5050F09 ZirCUT MINI FLAP DISCS Premium quality zirconia mini flap disc. Made with hi-tech zirconia abrasive material for best performance on all materials. Quick-change type R Plastic backing. MINI FLAP DISCS T27 FLAT 36 40 60 80 120 2 x R Z502003R Z502004R Z502006R Z502008R Z502012R 3 x R Z503003R Z503004R Z503006R Z503008R Z503012R 10 Other sizes, grits and materials available. Please contact Customer Service
A CUT RESIN FIBRE DISCS Aluminum oxide abrasive. General purpose fibre disc. Use on all angle grinders. Do not use without BACK-UP pad. Z CUT RESIN FIBRE DISCS 16 24 36 40 60 80 100 120 4 1/2 x 7/8 2A714501 2A714502 2A714503 2A714505 2A714506 2A714508 2A714510 2A714512 4 1/2 x 5/8-11 A714501L A714502L A714503L A714505L A714506L A714508L A714510L A714512L 5 x 7/8 2A715001 2A715002 2A715003 2A715005 2A715006 2A715008 2A715010 2A715012 5 x 5/8-11 A715001L A715002L A715003L A715005L A715006L A715008L A715010L A715012L 7 x 7/8 2A717001 2A717002 2A717003 2A717005 2A717006 2A717008 2A717010 2A717012 7 x 5/8-11 A717001L A717002L A717003L A717005L A717006L A717008L A717010L A717012L Zirconia alumina abrasive. High performance fibre disc. Use on all angle grinders. Do not use without BACK-UP pad. 16 24 36 40 60 80 100 120 4 1/2 x 7/8 2Z714501 2Z714502 2Z714503 2Z714505 2Z714506 2Z714508 2Z714510 2Z714512 4 1/2 x 5/8-11 Z714501L Z714502L Z714503L Z714505L Z714506L Z714508L Z714510L Z714512L 5 x 7/8 2Z715001 2Z715002 2Z715003 2Z715005 2Z715006 2Z715008 2Z715010 2Z715012 5 x 5/8-11 Z715001L Z715002L Z715003L Z715005L Z715006L Z715008L Z715010L Z715012L 7 x 7/8 2Z717001 2Z717002 2Z717003 2Z717005 2Z717006 2Z717008 2Z717010 2Z717012 7 x 5/8-11 Z717001L Z717002L Z717003L Z717005L Z717006L Z717008L Z717010L Z717012L C CUT RESIN FIBRE DISCS Ceramic alumina abrasive. Extreme performance fibre disc. Use on all angle grinders. Do not use without BACK-UP pad. 24 36 40 60 80 100 120 4 1/2 x 7/8 2C714502 2C714503 2C714505 2C714506 2C714508 2C714510 2C714512 4 1/2 x 5/8-11 C714502L C714503L C714505L C714506L C714508L A714510L C714512L 5 x 7/8 2C715002 2C715003 2C715005 2C715006 2C715008 2C715010 2C715012 5 x 5/8-11 C715002L C715003L C715005L C715006L C715008L C715010L C715012L 7 x 7/8 2C717002 2C717003 2C717005 2C717006 2C717008 2C717010 2C717012 7 x 5/8-11 C717002L C717003L C717005L C717006L C717008L C717010L C717012L A/O MINI RESIN FIBRE DISCS Aluminum oxide abrasive. General purpose mini fibre disc. Use on all die grinders. Quick-change type R. Do not use without BACK-UP pad. BLENDING 24 36 40 60 80 100 120 2 2A712002 2A712003 2A712005 2A712006 2A712008 2A712010 2A712012 3 2A713002 2A713003 2A713005 2A713006 2A713008 2A713010 2A713012 Z/A MINI RESIN FIBRE DISCS Zirconia alumina abrasive. High performance mini fibre disc. Use on all die grinders. Quick-change type R. Do not use without BACK-UP pad. 24 36 40 60 80 100 120 2 2Z712002 2Z712003 2Z712005 2Z712006 2Z712008 2Z712010 2Z712012 3 2Z713002 2Z713003 2Z713005 2Z713006 2Z713008 2Z713010 2Z713012 Other sizes and grits available. Please contact Customer Service 11
AloCUT QUICK-CHANGE MINI DISCS Premium aluminum oxide grain, R Style (3M, Plastic) or S Style (Norton, Metal). TYPE 24 36 40 50 60 80+ 1 1/2 R A601502R A601503R A601504R A601505R A601506R A6015--R* 2 R A602002R A602003R A602004R A602005R A602006R A6020-- R* 3 R A603002R A603003R A603004R A603005R A603006R A6030-- R* TYPE 24 36 40 50 60 80+ 1 1/2 S A601502S A601503S A601504S A601505S A601506S A6015- - S * 2 S A602002S A602003S A602004S A602005S A602006S A 6 0 2 0- - S * 3 S A603002S A603003S A603004S A603005S A603006S A 6 0 3 0- - S * * For above item numbers with and for grits not listed replace with: 08 for 80G, 12 for120g, 18 for 180G, 24 for 240G, 32 for 320G and 40 for 400G OctoCUT QUICK-CHANGE MINI DISCS Premium aluminum oxide grain, R Style (3M, Plastic). BLENDING TYPE 60 120 1 1/2 R A611506RO A611512RO 2 R A612006RO A612012RO 3 R A613006RO A613012RO ZeeCUT QUICK-CHANGE MINI DISCS Premium self-sharpening zirconia alumina abrasive. High performance, R Style (3M, Plastic) or S Style (Norton, Metal). TYPE 24 36 40 50 60 80+ 1 1/2 R Z601502R Z601503R Z601504R Z601505R Z601506R Z6015- - R * 2 R Z602002R Z602003R Z602004R Z602005R Z602006R Z 6 0 2 0- - R * 3 R Z603002R Z603003R Z603004R Z603005R Z603006R Z 6 0 3 0- - R * TYPE 24 36 40 50 60 80+ 1 1/2 S Z601502S Z601503S Z601504S Z601505S Z601506S Z6015- - S * 2 S Z602002S Z602003S Z602004S Z602005S Z602006S Z 6 0 2 0 - -S * 3 S Z603002S Z603003S Z603004S Z603005S Z603006S Z 6 0 3 0 - -S * * For above item numbers with and for grits not listed replace with: 08 for 80G and 12 for120g RED FURY QUICK-CHANGE MINI DISCS Hi-tech self-sharpening ceramic grain for ultimate performance. TOP- coat for cool cutting, load resisting and long life. R Style (3M, Plastic) or S Style (Norton, Metal). Firm holder and high pressure recommended. TYPE 24 36 40 50 60 80+ 1 1/2 R C651502R C651503R C651504R C651505R C651506R C6515--R* 2 R C652002R C652003R C652004R C652005R C652006R C6520 --R* 3 R C653002R C653003R C653004R C653005R C653006R C6530 --R* TYPE 24 36 40 50 60 80+ 1 1/2 S C651502S C651503S C651504S C651505S C651506S C6515- - S * 2 S C652002S C652003S C652004S C652005S C652006S C 6 5 2 0- - S * 3 S C653002S C653003S C653004S C653005S C653006S C 6 5 3 0- - S * * For above item numbers with and for grits not listed replace with: 08 for 80G and 12 for120g 12
A/O TRIM KUT DISCS Original trimmable disc for maximum abrasive usage. Premium aluminum oxide grain. Do not require back-up pad. 24 36 50 60 80 100 120 3 X 5/16-18 2ATK3002 2ATK3003 2ATK3005 2ATK3006 2ATK3008 2ATK3010 2ATK3012 4 1/2 x 7/8 2ATK4502 2ATK4503 2ATK4505 2ATK4506 2ATK4508 2ATK4510 2ATK4512 5 x 5/16-18 2ATK5002 2ATK5003 2ATK5005 2ATK5006 2ATK5008 2ATK5010 2ATK5012 Z/A TRIM KUT DISCS Original trimmable disc for maximum abrasive usage. Premium zirconia alumina grain. Do not require back-up pad. 24 36 50 60 80 100 120 3 X 5/16-18 2ZTK3002 2ZTK3003 2ZTK3005 2ZTK3006 2ZTK3008 2ZTK3010 2ZTK3012 4 1/2 x 7/8 2ZTK4502 2ZTK4503 2ZTK4505 2ZTK4506 2ZTK4508 2ZTK4510 2ZTK4512 5 x 5/16-18 2ZTK5002 2ZTK5003 2ZTK5005 2ZTK5006 2ZTK5008 2ZTK5010 2ZTK5012 SEMI-FLEXIBLE SPIRAL-RIBBED DISCS Reqire backup pad 294500HD, 295000HD or 297000HD. SILICON CARBIDE Suitable to work on marble, stones, building materials, very hard materials and glass. Made in ITALY 16 24 36 60 80 120 4 1/2 X 7/8 SSD45010 SSD45020 SSD45030 SSD45060 SSD45080 SSD45120 5 X 7/8 SSD50010 SSD50020 7 X 7/8 SSD70010 SSD70020 SSD70030 FIBERGLASS-BACKED SPIRAL-RIBBED DISCS Do not require back-up pad. SILICON CARBIDE Suitable to work on marble, stones, building materials, very hard materials and glass. Made in ITALY BLENDING 8 16 24 36 4 1/2 X 7/8 SSS45008 SSS45010 SSS45020 SSS45030 5 X 7/8 SSS50008 SSS50010 SSS50020 SSS50030 7 X 7/8 SSS70008 SSS70010 SSS70020 SSS70030 CUP WHEELS Long-lasting for heavy grinding. Sold as box of 10. FOR METAL ITEM # GRIT ABRASIVE TYPE CWA425 4 X 5/8-11 16 A/O CWA525 5 X 5/8-11 16 A/O CWA625 6 X 5/8-11 16 A/O FOR CONCRETE ITEM # GRIT ABRASIVE TYPE CWC425 4 X 5/8-11 16 S/C CWC525 5 X 5/8-11 16 S/C CWC625 6 X 5/8-11 16 S/C 13
BLACK STRIP AND CLEAN Flexible, general purpose Strip and clean for most jobs ITEM # FASTENER SC20BLKR 2 R SC30BLKR 3 R SC4012BLK 4 x 1/2 x 1/4 A/H SC4025BLK 4 x 1 x 1/4 A/H ITEM # FASTENER SC45DCBLK 4 1/2 x 7/8 27F SC45DCBLKS 4 1/2 x 5/8-11 27F SC50DCBLK 5 x 7/8 27F SC50DCBLKS 5 x 5/8-11 27F PURPLE STRIP AND CLEAN Less flexible, more durable, aggressive and faster cutting Strip and clean for tough jobs. ITEM # FASTENER SC20PURR 2 R SC30PURR 3 R SC4012PUR 4 x 1/2 x 1/4 A/H SC4025PUR 4 x 1 x 1/4 A/H ITEM # FASTENER SC45DCPUR 4 1/2 x 7/8 27F SC45DCPURS 4 1/2 x 5/8-11 27F SC50DCPUR 5 x 7/8 27F SC50DCPURS 5 x 5/8-11 27F FLAP WHEELS Ideal for hard-to-get-to surfaces and areas. Premium aluminum oxide abrasive material. MOUNTED FLAP WHEEL, 1/4 SHANK BLENDING SANDING DISCS 40 60 80 120 1 x 5/8 x 1/4 FWA1011 FWA1012 FWA1013 1 x 1 x 1/4 FWA1021 FWA1022 FWA1023 FWA1024 1 1/2 x 1/2 x 1/4 FWA1501 FWA1502 FWA1503 FWA1504 1 1/2 x 1 x 1/4 FWA1511 FWA1512 FWA1513 FWA1514 2 x 1/2 x 1/4 FWA2001 FWA2002 FWA2003 FWA2004 2 x 1 x 1/4 FWA2011 FWA2012 FWA2013 FWA2014 2 1/2 x 1 x 1/4 FWA2501 FWA2502 FWA2503 FWA2504 3 x 1 x 1/4 FWA3001 FWA3002 FWA3003 FWA3004 3 x 2 x 1/4 FWA3011 FWA3012 FWA3013 FWA3014 Velcro sanding discs for all materials. BACK-UP pad required. See Accessories. ABRASIVE BELTS 40 60 80 120 150 180 220 5x0H 2VEL5004 2VEL5006 2VEL5008 2VEL5012 2VEL5015 2VEL5018 2VEL5022 5x5H 2VEL5504 2VEL5506 2VEL5508 2VEL5512 2VEL5515 2VEL5518 2VEL5522 5x8H 2VEL5804 2VEL5806 2VEL5808 2VEL5812 2VEL5815 2VEL5818 2VEL5822 6x0H 2VEL6004 2VEL6006 2VEL6008 2VEL6012 2VEL6015 2VEL6018 2VEL6022 6x6H 2VEL6604 2VEL6606 2VEL6608 2VEL6612 2VEL6615 2VEL6618 2VEL6622 A/O, general use abrasive belts. HAND-HELD SANDERS 24 36 40 60 80 120 3 x 21 2BA32102 2BA32103 2BA32104 2BA32106 2BA32108 2BA32112 3 x 24 2BA32402 2BA32403 2BA32404 2BA32406 2BA32408 2BA32412 4 x 24 2BA42402 2BA42403 2BA42404 2BA42406 2BA42408 2BA42412 BENCH AND PEDESTIAL SANDERS 24 36 40 60 80 120 6x48 2BA64803 2BA64804 2BA64806 2BA64808 2BA64812 14
ABRASIVE SHEETS - PAPER 40 60 80 120 150 9" x 11" 2PDA91104 2PDA91106 2PDA91108 2PDA91112 2PDA91115 180 240 320 400 9 x 11 2PDA91118 2PDA91124 2PDA91132 2PDA91140 ABRASIVE SHEETS - WATERPOOF PAPER 60 80 120 150 180 9" x 11" 2PWS91106 2PWS91108 2PWS91112 2PWS91115 2PWS91118 240 320 400 600 800 9 x 11 2PWS91124 2PWS91132 2PWS91140 2PWS91160 2PWS91180 1200 1500 2000 9 x 11 2PWS911120 2PWS911150 2PWS911200 ABRASIVE SHEETS - CLOTH SHEET ABRASIVE SHOP ROLLS 40 60 80 120 9" x 11" 2CDA91104 2CDA91106 2CDA91108 2CDA91112 150 180 220 280 9 x 11 2CDA91115 2CDA91118 2CDA91122 2CDA91128 BLENDING 40 60 80 120 150 1" x 55 YRDS 2SRA1004 2SRA1006 2SRA1008 2SRA1012 2SRA1015 1-1/2" x 55 YRDS 2SRA1506 2SRA1508 2SRA1512 2SRA1515 2" x 55 YRDS 2SRA2004 2SRA2006 2SRA2008 2SRA2012 2SRA2015 180 240 320 400 1" x 55 YRDS 2SRA1018 2SRA1024 2SRA1032 2SRA1040 1-1/2" x 55 YRDS 2SRA1518 2SRA1524 2SRA1532 2SRA1540 2" x 55 YRDS 2SRA2018 2SRA2024 2SRA2032 15
QUICK-CHANGE SURFACE CONDITIONING DISCS (SCD) Finish CUT SCD Mini Discs - Premium surface conditioning material, R Style (3M) BY GRADE X CRS CRS MED V FINE DARK BROWN BROWN MAROON BLUE 1 1/2 F8015XCR F8015C0R F8015M0R F8015VFR 2 F8020XCR F8020C0R F8020M0R F8020VFR 3 F8030XCR F8030C0R F8030M0R F8030VFR Finish CUT SCD Mini Discs - Premium surface conditioning material, S Style (Norton) BY GRADE X CRS CRS MED V FINE 1 1/2 F8015XCS F8015C0S F8015M0S F8015VFS 2 F8020XCS F8020C0S F8020M0S F8020VFS 3 F8030XCS F8030C0S F8030M0S F8030VFS FINISHING HAND PADS Finish CUT Velcro Discs - Premium surface conditioning material, V Style (Velcro) BY GRADE X CRS CRS MED V FINE 1 1/2 F8015XCV F8015C0V F8015M0V F8015VFV 2 F8020XCV F8020C0V F8020M0V F8020VFV 3 F8030XCV F8030C0V F8030M0V F8030VFV 4 F8040XCV F8040C0V F8040M0V F8040VFV 4 1/2 F8045XCV F8045C0V F8045M0V F8045VFV 5 F8050XCV F8050C0V F8050M0V F8050VFV 6 F8060XCV F8060C0V F8060M0V F8060VFV 7 F8070XCV F8070C0V F8070M0V F8070VFV 8 F8080XCV F8080C0V F8080M0V F8080VFV Finish CUT SCD Mini Discs - Premium surface conditioning material, R Style (3M) BY GRADE GEN PURPOSE VERY FINE ULTRA FINE EXTRA CUT CLEANING GREEN MAROON GRAY TAN White 6" x 9" 2FHP6X9GN 2FHP6X9MN 2FHP6X9GY 2FHP6X9TN 2FHP6X9WT 16
CONVOLUTE WHEELS CLEAN EDGE DEBURRING WHEELS ITEM # GRADE DENSITY CW602525B7SF 6 X 1 X 1 AGGRESSIVE SOFT 7 CW602525B9SF 6 X 1 X 1 AGGRESSIVE HARD 9 CW602525C7AF 6 X 1 X 1 MEDIUM AGGRESSIVE SOFT 7 CW602525C8SF 6 X 1 X 1 MEDIUM AGGRESSIVE MEDIUM 8 CW602525D7SF 6 X 1 X 1 LOW AGGRESSIVE SOFT 7 CW602525E7SF 6 X 1 X 1 NON AGGRESSIVE SOFT 7 MIRROR CUT SMALL DIAMETER UNITIZED WHEELS High density unitized wheels are a combination of several layers of non-woven abrasive material compressed and impregnated with resin. Other grades, diameters and thicknesses are available. These wheels have been developed for cleaning and finishing operations and they are highly conformable while maintaining durability. They will not contaminate work surface. They can be installed on normal portable electro-tools or with an extension arm in order to reach the most difficult areas. UNITIZED DISCS ITEM # GRADE DENSITY UWA2006MMDA 2 X 1/4 X 1/4 A-MEDIUM MEDIUM UWA2010MMDA 2 X 3/8 X 1/4 A-MEDIUM MEDIUM UWA2006CMDA 2 X 1/4 X 1/4 A-COARSE MEDIUM UWS2006FMDA 2 X 1/4 X 1/4 S-FINE MEDIUM UWS2010FMDA 2 X 3/8 X 1/4 S-FINE MEDIUM UWA3006MMDA 3 X 1/4 X 1/4 A-MEDIUM MEDIUM UWA3006CMDA 3 X 1/4 X 1/4 A-COARSE MEDIUM UWS3006FMDA 3 X 1/4 X 1/4 S-FINE MEDIUM High density unitized discs are a combination of several layers of non-woven abrasive material compressed and impregnated with resin. Other grades, diameters and thicknesses are available. These discs have been developed for cleaning and finishing operations and they are highly conformable while maintaining durability. They do not contaminate work surfaces. They can be installed on electro-tools and pneumatic tools with the appropriate adapter. MIRROR CUT UNITIZED MINI DISCS - R Style Fastener ITEM # GRADE DENSITY UDA2006MMDR 2 X 1/4 A-MEDIUM MEDIUM UDA2010MMDR 2 X 3/8 A-MEDIUM MEDIUM UDA2006CMDR 2 X 1/4 A-COARSE MEDIUM UDS2006FMDR 2 X 1/4 S-FINE MEDIUM UDS2010FMDR 2 X 3/8 S-FINE MEDIUM UDA3006MMDR 3 X 1/4 A-MEDIUM MEDIUM UDA3006CMDR 3 X 1/4 A-COARSE MEDIUM UDS3006FMDR 3 X 1/4 S-FINE MEDIUM FINISHING MIRROR CUT UNITIZED DC DISCS - T27F Shape ITEM # GRADE DENSITY UDA4514MSD 4 1/2 X 9/16 X 7/8 A-MEDIUM STANDARD UDA4514MMD 4 1/2 X 9/16 X 7/8 A-MEDIUM MEDIUM UDA4514CMD 4 1/2 X 9/16 X 7/8 A-COARSE MEDIUM UDA4514CHD 4 1/2 X 9/16 X 7/8 A-COARSE HIGH UDS4514FSD 4 1/2 X 9/16 X 7/8 S-FINE STANDARD UDS4514FMD 4 1/2 X 9/16 X 7/8 S-FINE MEDIUM UDS4514MMD 4 1/2 X 9/16 X 7/8 S-MEDIUM MEDIUM UDS4514MHD 4 1/2 X 9/16 X 7/8 S-MEDIUM HIGH 17
FLOOR GRINDING DISC - 4 SLOTS 10 14 24 16 X 1 1001.400.001.010 15 X 1 1004.375.001.010 1004.375.001.014 1004.375.001.024 16 X 1 1004.400.001.010 1004.400.001.014 1004.400.001.024 17 X 1 1004.430.001.010 1004.430.001.014 1004.430.001.024 18 X 1 1004.450.001.010 1004.450.001.014 1004.450.001.024 36 60 80 16 X 1 15 X 1 1004.375.001.036 16 X 1 1004.400.001.036 1004.400.001.060 1004.400.001.080 17 X 1 1004.430.001.036 18 X 1 1004.450.001.036 FLOOR GRINDING DISC - VELCRO, NO HOLE CARBIDE TOOLS FLOOR GRINDING DISCS - 16 SLASHES FLOOR GRINDING DISCS - 8 SLASHES 3 6 10 14 24 16 1010.400.V01.003 1010.400.V01.006 1010.400.V01.010 1010.400.V01.014 1010.400.V01.024 3 6 10 16 X 4 1016.400.105.014 1016.400.105.024 1016.400.105.036 6 10 14 24 15 X 1 1008.375.001.010 1008.375.001.014 1008.375.001.024 16 X 1 1008.400.001.010 1008.400.001.014 1008.400.001.024 17 X 1 1008.430.001.006 1008.430.001.010 1008.430.001.014 1008.430.001.024 18 X 1 1008.450.001.010 1008.450.001.014 1008.450.001.024 1008.450.001.036 20 X 1 1008.500.001.010 1008.500.001.014 1008.500.001.024 36 60 80 15 X 1 1008.375.001.036 16 X 1 1008.400.001.036 17 X 1 1008.430.001.036 1008.430.001.060 1008.430.001.080 18 X 1 1008.450.001.060 1008.450.001.080 20 X 1 1008.500.001.036 1008.500.001.060 18
FLOOR GRINDING BLOCKS Grinding rings and grinding discs are for heavy-duty grinding. 3 6 10 14 24 5" X 10-11mm 1101.127.001.003 1101.127.001.006 1101.127.001.010 1101.127.001.014 5" X 10mm/M14 1114.127.001.003 1114.127.001.006 1114.127.001.010 1114.127.001.014 1114.127.001.024 FLOOR GRINDING RING Grinding rings and grinding discs are for heavy-duty grinding. 3 6 10 14 24 16 X 12 X 10-11mm 1140.400.001.003 1140.400.001.006 1140.400.001.010 1140.400.001.014 1140.400.001.024 17 X 13 X 9mm/M10 1144.440.001.006 1144.440.001.010 1144.440.001.014 FLOOR GRINDING SEGMENT SANDING DISC, VELCRO Grinding rings and grinding discs are for heavy-duty grinding. Carbide tools give a powerful true grit performance on both wet and dry applications. The highly wear-resistant abrasive lasts up to 100 times longer than sandpaper, and is far more effective and time-saving than traditional sanding methods. 10 2 3/8 X 2 1100.060.050.010 14 24 30 36 60 7 2001.180.001.014 2001.180.001.024 2001.180.001.036 2001.180.001.060 8 2001.200.001.014 2001.200.001.024 2001.200.001.030 2001.200.001.036 2001.200.001.060 9 2001.225.001.014 2001.225.001.024 2001.225.001.036 2001.225.001.060 9 X 9H 2005.225.001.014 2005.225.001.024 2005.225.001.036 2005.225.001.060 9 X 10H 2006.225.001.014 2006.225.001.024 2006.225.001.036 2006.225.001.060 80 120 180 240 7 2001.180.001.080 2001.180.001.120 2001.180.001.180 2001.180.001.240 8 2001.200.001.080 2001.200.001.120 2001.200.001.180 2001.200.001.240 9 2001.225.001.080 2001.225.001.120 2001.225.001.180 2001.225.001.240 9 X 9H 2005.225.001.080 2005.225.001.120 2005.225.001.180 2005.225.001.240 9 X 10H 2006.225.001.080 2006.225.001.120 2006.225.001.180 2006.225.001.240 CARBIDE TOOLS SANDING DISC Carbide tools give a powerful true grit performance. The highly wear-resistant abrasive lasts up to 100 times longer than sanding discs, and is far more effective and time-saving than traditional sanding methods. 14 24 36 60 4 1/2 X 1 3010.125.001.014 3010.125.001.024 3010.125.001.036 3010.125.001.060 6 X 1 3010.150.001.014 3010.150.001.024 3010.150.001.036 3010.150.001.060 7 X 1 3010.180.001.014 3010.180.001.024 3010.180.001.036 3010.180.001.060 19
SOLID GRINDING DISC Carbide tools give a powerful true grit performance. The highly wear-resistant abrasive lasts up to 100 times longer than conventional grinding discs, and is far more effective and time-saving than traditional grinding methods. 14 24 36 50 60 4 1/2 X 7/8 3001.115.001.014 3001.115.001.024 3001.115.001.036 5 X 7/8 3001.125.001.014 3001.125.001.024 3001.125.001.036 3001.125.001.050 3001.125.001.060 7 X 7/8 3001.180.001.014 3001.180.001.024 3001.180.001.036 5 X 7/8 3002.125.001.014 3002.125.001.024 3002.125.001.036 7 X 7/8 3002.180.001.014 3002.180.001.024 3002.180.001.036 SANDING TRIANGLE Carbide tools give a powerful true grit performance. The highly wear-resistant abrasive lasts up to 100 times longer than sandpaper, and is far more effective and time-saving than traditional sanding methods. CARBIDE TOOLS DESCRIPTION 24 36 60 80 3 X 3 1/8 FEIN 3023.080.002.024 3023.080.002.036 3023.080.002.060 3023.080.002.080 3 X 3 1/2 BOSH, B&D, MAKITA 3023.090.002.024 3023.090.002.036 3023.090.002.060 3023.090.002.080 3 X 3 3/4 FESTOOL 3023.095.002.024 3023.095.002.036 3023.095.002.060 3023.095.002.080 3 3/4 X 4, 7H FESTOOL DTS 400 3027.147.002.024 3027.147.002.036 3027.147.002.060 3027.147.002.080 120 180 240 3 X 3 1/8 FEIN 3023.080.002.120 3023.080.002.180 3023.080.002.240 3 X 3 1/2 BOSH, B&D, MAKITA 3023.090.002.120 3023.090.002.180 3023.090.002.240 3 X 3 3/4 FESTOOL 3023.095.002.120 3023.095.002.180 3023.095.002.240 3 3/4 X 4, 7H FESTOOL DTS 400 3027.147.002.120 3027.147.002.180 3027.147.002.240 SANDING DISCS FOR ORBITAL SANDERS Carbide tools give a powerful true grit performance on both wet and dry applications. The highly wear-resistant abrasive lasts up to 100 times longer than sandpaper discs, and is far more effective and time-saving than traditional sanding methods. DESCRIPTION 24 36 60 80 3 1/2 X 7H FESTOOL RO 90 DX 4 IN 1 3027.090.002.024 3027.090.002.036 3027.090.002.060 3027.090.002.080 6 X 6H BOSH, B&D, MAKITA 3026.150.002.024 3026.150.002.036 3026.150.002.060 3026.150.002.080 5 X 8H BOSH, B&D, MAKITA 3028.125.002.024 3028.125.002.036 3028.125.002.060 3028.125.002.080 5 X 9H FESTOOL 3029.125.002.024 3029.125.002.036 3029.125.002.060 3029.125.002.080 6 X 9H FESTOOL 3029.150.002.024 3029.150.002.036 3029.150.002.060 3029.150.002.080 5 X 0H BOSH, B&D, MAKITA 3020.125.002.024 3020.125.002.036 3020.125.002.060 3020.125.002.080 6 X 0H LAGLER 3020.150.002.024 3020.150.002.036 3020.150.002.060 3020.150.002.080 120 180 240 3 1/2 X 7H FESTOOL RO 90 DX 4 IN 1 3027.090.002.120 3027.090.002.180 3027.090.002.240 6 X 6H BOSH, B&D, MAKITA 3026.150.002.120 3026.150.002.180 3026.150.002.240 5 X 8H BOSH, B&D, MAKITA 3028.125.002.120 3028.125.002.180 3028.125.002.240 5 X 9H FESTOOL 3029.125.002.120 3029.125.002.180 3029.125.002.240 6 X 9H FESTOOL 3029.150.002.120 3029.150.002.180 3029.150.002.240 5 X 0H BOSH, B&D, MAKITA 3020.125.002.120 6 X 0H LAGLER 3020.150.002.120 SANDING PADS FOR ORBITAL SANDERS Carbide tools give a powerful true grit performance. The highly wear-resistant abrasive lasts up to 100 times longer than sandpaper, and is far more effective and time-saving than traditional sanding methods. DESCRIPTION 24 36 60 80 5 1/4 X 3 1/8 FESTOOL 3100.133.002.024 3100.133.002.036 3100.133.002.060 3100.133.002.080 7 1/4 X 3 5/8 MAKITA 3100.180.002.024 3100.180.002.036 3100.180.002.060 3100.180.002.080 120 180 240 5 1/4 X 3 1/8 FESTOOL 3100.133.002.120 3100.133.002.180 3100.133.002.240 7 1/4 X 3 5/8 MAKITA 3100.180.002.120 3100.180.002.180 3100.180.002.240 20
SANDING PADS FOR HAND TOOLS Carbide hand-tools are ergonomicly designed and fit perfectly in a craftsman s hand with or without gloves. DESCRIPTION 4 x 2 3/8 LION FOOT SANDING BLOCK ERGONOMIC GRIP 5301.100.001.000 DESCRIPTION 24 36 60 80 4 x 2 3/8 LION FOOT SANDING BLOCK 5301.100.001.024 5301.100.001.036 5301.100.001.060 5301.100.001.080 120 180 240 4 x 2 3/8 LION FOOT SANDING BLOCK 5301.100.001.120 5301.100.001.180 5301.100.001.240 SANDING PLATES FOR HAND FLOATS Carbide hand-tools are ergonomicly designed and fit perfectly in a craftsman s hand with or without gloves. DESCRIPTION 8 X 4 HANDY FLOAT WITH MAGNETS 5402.200.001.000 DESCRIPTION 14 24 36 60 8 X 4 SANDING PLATE 5402.200.001.014 5402.200.001.024 5402.200.001.036 5402.200.001.060 80 120 180 8 X 4 SANDING PLATE 5402.200.001.080 5402.200.001.120 5402.200.001.180 FILES SANDING TROWEL 90 DEG. DESCRIPTION 11 X 5 1/2 PROFESSIONAL FLOAT WITH MAGNETS 5400.280.001.000 20 X 5 PROFESSIONAL FLOAT WITH MAGNETS 5400.500.001.000 DESCRIPTION 14 24 36 11 X 5 1/2 SANDING PLATE 5401.280.001.014 5401.280.001.024 5401.280.001.036 20 X 5 SANDING PLATE 5401.500.001.014 5401.500.001.024 5401.500.001.036 Carbide hand-tools are ergonomicly designed and fit perfectly in a craftsman s hand with or without gloves. DESCRIPTION 14 24 36 6 FLAT FILE 5501.150.001.030 8 FLAT FILE 5501.200.001.030 12 FLAT FILE 5501.300.001.024 5501.300.001.030 5501.300.001.036 12 HALF ROUND FILE 5502.300.001.024 5502.300.001.030 5502.300.001.036 12 X Ø12mm ROUND FILE 5503.300.001.024 5503.300.001.030 5503.300.001.036 12 X Ø8mm ROUND FILE 5504.300.001.024 5504.300.001.030 5504.300.001.036 Carbide hand-tools are ergonomicly designed and fit perfectly in a craftsman s hand with or without gloves. CARBIDE TOOLS 14 24 36 8 X 4 X 1 6501.200.001.014 6501.200.001.024 6501.200.001.036 60 80 120 8 X 4 X 1 6501.200.001.060 6501.200.001.080 6501.200.001.120 DESCRIPTION TURNING PART AND EXTENSION FOR FLOATS AND TROWEL 90 DEG. 6600.000.001.000 TROWEL RASP AND TROWEL RASP SAW TROWEL RASP AND TROWEL RASP SAW FOR POLYSTYRENE INSULATION TROWEL RASP 24 14 X 4 6551.350.100.024 14 X 6 6551.350.150.024 14 X 8 6551.350.200.024 TROWEL RASP SAW 24 14 X 4 6552.350.100.024 14 X 6 6552.350.150.024 14 X 8 6552.350.200.024 21
CARBIDE RECIPROCATING SAW BLADES CARBIDE TOOLS Brick N Block - BLACK LABEL A reciprocating saw blade designed for cutting in light concrete or autoclaved aerated concrete blocks. 1 3/8 TPI Brick N Block - BLUE LABEL 9 1/4 X 3/4 DT136 12 X 3/4 DT137 12 X 2 DT138 15 3/4 X 3/4 DT139 17 3/4 X 2 DT140 The first (and still only) reciprocating saw blade for bricks and blocks that will also cut any embedded screws/nails (e.g around window or door frames). Brick N Block - PINK LABEL 3 1/4 TPI 6 X 3/4 DT101 9 1/4 X 3/4 DT102 12 X 3/4 DT103 15 3/4 X 3/4 DT104 12 X 2 DT105 17 3/4 X 2 DT106 The first self-sharpening reciprocating saw blade and a good standard blade for bricks and blocks. 2 TPI Brick N Block - GRAY LABEL 6 X 3/4 DT129 9 1/4 X 3/4 DT130 12 X 3/4 DT131 15 3/4 X 3/4 DT133 12 X 2 DT132 17 3/4 X 2 DT134 Reciprocating saw blade with a self-sharpening carbide tooth design. For cutting bricks, blocks and mortar joints. Brick N Block - RED LABEL HD 4 1/4 TPI 6 X 3/4 DT115 9 1/4 X 3/4 DT116 12 X 3/4 DT117 15 3/4 X 3/4 DT119 12 X 2 DT118 17 3/4 X 2 DT120 A self-sharpening reciprocating saw blade good for bricks and blocks. This is one of our EXTRA strong and rigid saw blades. Brick N Block - YELLOW LABEL HD 2 TPI 9 1/4 X 1 2/3 DT250 12 X 1 2/3 DT251 17 3/4 X 1 2/3 DT252 A reciprocating saw blade for bricks and blocks that will also cut any embedded screws/nails (e.g around window or door frames). This is one of our EXTRA strong and rigid saw blades. 4 1/4 TPI 9 1/4 X 1 2/3 DT280 12 X 1 2/3 DT281 17 3/4 X 1 2/3 DT282 Brick N Block - WHITE LABEL HD Reciprocating saw blade with a self-sharpening carbide tooth design. For cutting bricks, blocks and mortar joints. This is one of our EXTRA strong and rigid saw blades. All Wood - LIGHT GREEN LABEL 4 1/4 TPI 9 1/4 X 1 2/3 DT290 12 X 1 2/3 DT291 17 3/4 X 1 2/3 DT292 A special reciprocating saw blade with teeth in a mix of tungsten carbide and steel. This new tooth design is similar to that of a SHARK tooth and will cut in both directions. It cuts all types of wood as well as plaster and fiber boards. All Wood - GREEN LABEL 6 1/3 TPI 6 x 55/64 DT294 9-1/4 X 55/64 DT295 12 X 55/64 DT296 A special reciprocating saw blade with a mix of teeth of tungsten carbide and steel. For cutting in most types of wood, plaster and plastic and ideal for garden work. All Wood - DARK GREEN LABEL 5 TPI 6 X 3/4 DT109 9 1/4 X 3/4 DT110 12 X 3/4 DT111 12 X 2 DT112 A true DEMOLITION blade. Designed for cutting in all types of wood and will also cut not only nails but also screws, making it perfect for cutting out windows that have been fixed with frame screws or anchor screws. Metal Cutting - LIGHT BLUE LABEL Fiber & Heat - DARK GRAY LABEL 7 1/4 TPI 4 X 3/4 DT221 6 X 3/4 DT192 9 1/4 X 3/4 DT193 12 X 3/4 DT194 Having a special tooth configuration this blade works well in steel and metal. It is a unique blade and a true FIRE & RESCUE blade due to its strength and versatility. 7 1/4 TPI 4 X 3/4 DT122 6 X 3/4 DT123 9 1/4 X 3/4 DT124 12 X 3/4 DT125 This FIBER & HEAT reciprocating saw blade is developed for cutting in fiber reinforced materials as well as heat sensitive materials. 7 1/4 TPI 4 X 3/4 DT213 6 X 3/4 DT214 9 1/4 X 3/4 DT215 12 X 3/4 DT216 22
BRICK AND BLOCK CARBIDE HAND SAWS Brick N Block - HAND SAW BLACK LABEL 2 & 1 1/3 TPI 15 3/4 DT200 19 4/5 DT201 24 DT202 Brick N Block - HAND SAW PINK LABEL 2 TPI 15 3/4 DT196 19 4/5 DT197 24 DT198 Brick N Block - HAND SAW GRAY LABEL 4 1/4 TPI 15 3/4 DT188 19 4/5 DT189 24 DT190 Brick N Block - HAND SAW WHITE LABEL 4 1/4 TPI 27 1/2 (HALF TOOTH) DT260 27 1/2 (FULL TOOTH) DT261 TUCK POINTING CARBIDE ROUTER BITS Tuck Pointing Carbide Router Bits - BLACK LABEL GRAY LABEL REPLACEMENT TIP 1/4 DT176 Tuck Pointing Carbide Router Bits - BLUE LABEL 0.3125 DT145 0.375 DT149 0.46875 DT146 Tuck Pointing Carbide Router Bits - GRAY LABEL 5/16 DT165 3/8 DT166 GRAY LABEL + EXTRA TIP 5/16 DT168 3/8 DT169 CARBIDE TRIMMING DISCS BLACK LABEL SAFETY SHIELD USAGE GRAY LABEL BIT AND SAFETY SHIELD BLUE LABEL GROUT RAKE FOR SMALL ANGLE GRINDERS 5/16-1 TIP DT171 3/8-1 TIP DT173 5/16-2 TIPS DT172 3/8-2 TIPS DT174 DT178 5/16 DT183 3/8 DT184 1/8 DT151 5/16 DT152 CARBIDE TOOLS Carbide Trimming Discs - GREEN LABEL 3 CONICAL DT210 4 CONICAL DT211 5 CONICAL DT212 4 FLAT DT157 5 FLAT DT158 Carbide Trimming Discs - BLACK LABEL 3 CONICAL DT218 4 CONICAL DT219 5 CONICAL DT220 4 FLAT DT159 5 FLAT DT160 SAW BLADES Hand Saw Blades - BLACK LABEL 12 DT300 14 DT301 16 DT302 18 DT303 20 DT304 22 DT305 23 DT306 24 DT307 26 DT308 28 DT309 Circular Saw Blade - BLUE LABEL 3 1/4 TPI 6 X 3/4 DT310 23
DIY EXTREME BRANDED WIRE BRUSHES TUBE WIRE BRUSH CRIMPED CARBON STEEL 9/16 x 2 3/4 EXTB916 STRINGER BEAD KNOTTED WIRE WHEEL BRUSH, CARBON STEEL 4" x 5/8"-11 EXYF445AP 5" x 5/8"-11 EXYF545AP 6" x 1/4" x 5/8"-11 EXYF635A KNOTTED WIRE BANDED CUP BRUSH, CARBON STEEL KNOTTED WIRE CUP BRUSH, CARBON STEEL 2-3/4"x5/8"-11 4"x5/8"-11 5"x5/8"-11 EXY315AP EXY415AP EXY515AP 3" x 5/8"-11, S0.35 EXYG315AP 4"x5/8"-11 EXYG415AP WIRE BRUSHES CIRCULAR CRIMPED WIRE WHEEL BRUSH, CARBON STEEL 6 x1 x5/8 EXYB668AP CRIMPED WIRE SAUCER(BEVEL) CUP BRUSH, CARBON STEEL 4"x5/8"-11 EXYC415AP 4 1/2" x 5/8-11 EXYC215AP KNOTTED WIRE CUP BRUSH, STAINLESS STEEL 2-3/4 x5/8-11, S0.20 EXYG315SP CRIMPED WIRE CUP BRUSH, CARBON STEEL 4" x 5/8"-11, S0.50 EXYH305AP 4-1/2x5/8"-11 EXYH405AP KNOTTED WHEEL WIRE BRUSH, CARBON STEEL 4" x 5/8"-11 EXYE435AP 6" x 3/8" x 5/8"-11 EXYE635AP KNOTTED WIRE SAUCER(BEVEL)-CUP BRUSH, CARBON STEEL 4"x5/8"-11 EXYT415AP 4" x 5/8"-11,S0.35 EXYT215AP 24
INDUSTRIAL WIRE BRUSHES KNOTTED WHEEL WIRE BRUSH CARBON STEEL WIRE 0.020 4" x 5/8"-11 EXYE435A 6" x 3/8" x 5/8"-11 EXYE635A STRINGER BEAD KNOTTED WIRE WHEEL BRUSH, CARBON STEEL WIRE 0.020 4" x 5/8"-11 EXYF445A 6 1/2" x 1/4" x 5/8"-11 EXYF645A STRINGER BEAD KNOTTED WIRE WHEEL BRUSH STAINLESS WIRE 0.020 4 x 5/8-11 EXYF445S CRIMPED WIRE CUP BRUSH, CARBON STEEL KNOTTED WIRE CUP BRUSH, CARBON STEEL END WIRE BRUSH A B C WIRE 0.014 WIRE 0.020 3" x 5/8"-11 EXYH305A 2-3/4"x5/8"-11 EXYG315A 4" x 5/8"-11 EXYH405A 4"x5/8"-11 EXYG415A DESCRIPTION WIRE 3/4"x1/4" EXYK001A END WIRE BRUSH WITH 1/4" SHAFT TYPE A CARBON STEEL CRIMPED, 0.020" 1-1/8"x1/4" EXYK002A END WIRE BRUSH WITH 1/4" SHAFT TYPE B CARBON STEEL KNOTTED, 0.020" 2-1/2"x1/4" EXYK003A END WIRE BRUSH WITH 1/4" SHAFT TYPE C CARBON STEEL CRIMPED FLAT, 0.020" 1"x1/4" EXYK004A END WIRE BRUSH WITH 1/4" SHAFT TYPE A CARBON STEEL CRIMPED, 0.020" 3/4"x1/4" EXYK005A END WIRE BRUSH WITH 1/4" SHAFT TYPE B CARBON STEEL KNOTTED, 0.020" 2"x1/4" EXYK006A END WIRE BRUSH WITH 1/4" SHAFT TYPE C CARBON STEEL CRIMPED FLAT, 0.014" 3"x1/4" EXYK007A END WIRE BRUSH WITH 1/4" SHAFT TYPE C CARBON STEEL CRIMPED FLAT, 0.014" 2-1/2"x1/4" EXYK008A END WIRE BRUSH WITH 1/4" SHAFT TYPE D CARBON STEEL CRIMPED CUP, 0.014" 3"x1/4" EXYK013A END WIRE BRUSH WITH 1/4" SHAFT TYPE E CARBON STEEL KNOTTED FLAT, 0.020" 4"x1/4" EXYK014A END WIRE BRUSH WITH 1/4" SHAFT TYPE E CARBON STEEL KNOTTED FLAT, 0.020" 3"x1/2" EXYK015A END WIRE BRUSH WITH 1/4 SHAFT TYPE E CARBON STEEL KNOTTED FLAT, 0.020" WIRE BRUSHES D E 25
SMALL DIAMETER DIAMOND BLADES HIGH PERFORMANCE GENERAL PURPOSE SEGMENTED BLADES Dry cutting blades for concrete, concrete blocks, paving stones and brick. Can also cut asphalt. PREMIUM GENERAL PURPOSE SEGMENTED BLADES Dry cutting blades for concrete, concrete blocks, paving stones and brick. Can also cut asphalt. 4 X.080 X 7/8, 5/8 DB0101 4-1/2 X.080 X 7/8,5/8 DB0102 5 X.080 X 7/8, 5/8 DB0103 7 X.090 X 7/8, 5/8 DB0104 8 X.090 X 7/8, 5/8 DB0105 4X.080X7/8, 5/8 DB0201 4-1/2X.080X7/8, 5/8 DB0202 5 X.080 X 7/8, 5/8 DB0203 7 X.090 X 7/8, 5/8 DB0204 8 X.090 X 7/8, 5/8 DB0205 HIGH PERFORMANCE GENERAL PURPOSE TURBO BLADES Continous rim cuts faster. For dry or wet cutting of concrete, concrete blocks, paving stones and brick. Can also cut asphalt. PREMIUM GENERAL PURPOSE TURBO BLADES Continous rim cuts faster. For dry or wet cutting of concrete, concrete blocks, paving stones and brick. Can also cut asphalt. DIAMOND PRODUCTS 4 X.080 X 7/8, 5/8 DB0301 4-1/2 X.080 X 7/8, 5/8 DB0302 5 X.080 X 7/8, 5/8 DB0303 6 X.080 X 7/8, 5/8 DB0304 7 X.090 X 7/8, 5/8 DB0305 HIGH PERFORMANCE TURBO BLADES FOR HARD MATERIALS Continous rim for dry or wet cutting of hard materials like granite, marble and other very hard stones as well. 4 X.080 X 7/8, 5/8 DB0501 4-1/2 X.080 X 7/8, 5/8 DB0502 5 X.080 X 7/8, 5/8 DB0503 7 X.090 X 7/8, 5/8 DB0504 HIGH PERFORMANCE TUCK POINTING BLADES Maximum performance on mortar joints. Wet or dry. 4-1/2 X.250 X 7/8, 5/8 DB0701 5 X.250 X 7/8, 5/8 DB0702 4X.085X7/8, 5/8 DB0401 4-1/2 X.085 X 7/8, 5/8 DB0402 5 X.085 X 7/8, 5/8 DB0403 6 X.090 X 7/8, 5/8 DB0404 7X.090X7/8, 5/8 DB0405 PREMIUM CONTINUOUS RIM For dry or wet cutting of tiles, ceramic and porcelane. 4-1/2 X.060 X 7/8, 5/8 DB0601 5 X.060 X 7/8, 5/8 DB0602 7 X.060 X 7/8, 5/8 DB0603 8 X.060 X 7/8, 5/8 DB0604 10 X.065 X 5/8 DB0605 12 X.080 X 1 DB0606 PREMIUM TUCK POINTING BLADES Maximum performance on mortar joints cleaning. Wet or dry. 4 X.250 X 7/8, 5/8 DB0801 4-1/2 X.250 X 7/8, 5/8 DB0802 5 X.250 X 7/8, 5/8 DB0803 7 X.250 X 7/8, 5/8 DB0804 PREMIUM TUCK POINTING SANDWICH TYPE BLADES Maximum performance on mortar joints cleaning. Wet or dry. Work faster than a regular tuck point blade. PREMIUM V-SHAPED CRACK CHASER BLADES For mortar joints cleaning. Wet or dry. Other sizes available. 4 X.250 X 7/8, 5/8 DB0901 4-1/2 X.250 X 7/8, 5/8 DB0902 5 X.250 X 7/8, 5/8 DB0903 4-1/2 X.375 X 7/8 DB1001 7 X.375 X 7/8 DB1002 26
DIAMOND CUP WHEELS HIGH PERFORMANCE SINGLE ROW DIAMOND CUP WHEELS Use on concrete, brick, block, stone and masonry surfaces. HIGH PERFORMANCE DOUBLE ROW DIAMOND CUP WHEELS Use on concrete, brick, block, stone and masonry surfaces. 4 X 7/8, 5/8,20mm DCW101 4 X 5/8-11 DCW102 4.5 X 7/8 DCW103 4.5 X 5/8-11 DCW104 5 X 7/8 DCW105 5 X 5/8-11 DCW106 7 X 7/8 DCW107 7 X 5/8-11 DCW108 4 X 7/8 DCW201 4 X 5/8-11 DCW202 4.5 X 7/8 DCW203 4.5 X 5/8-11 DCW204 5 X 7/8 DCW205 5 X 5/8-11 DCW206 7 X 7/8 DCW207 7 X 5/8-11 DCW208 PREMIUM DOUBLE ROW DIAMOND CUP WHEELS Use on concrete, brick, block, stone and masonry surfaces. 4 X 7/8 DCW301 4 X 5/8-11 DCW302 4.5 X 7/8 DCW303 4.5 X 5/8-11 DCW304 5 X 7/8 DCW305 5 X 5/8-11 DCW306 7 X 7/8 DCW307 7 X 5/8-11 DCW308 HIGH PERFORMANCE SEGMENTED DIAMOND CUP WHEELS Use on concrete, brick, block, stone and masonry surfaces. Grind facter but also wear faster. 4 X 7/8, 9 SEGS DCW401 4 X 5/8-11, 9 SEGS DCW402 4 X 7/8, 15 SEGS DCW403 4 X 5/8-11, 15 SEGS DCW404 4 X 7/8, 18 SEGS DCW405 4 X 5/8-11, 18 SEGS DCW406 4.5 X 7/8, 9 SEGS DCW407 4.5 X 5/8-11, 9 SEGS DCW408 4.5 X 7/8, 10 SEGS DCW409 4.5 X 5/8-11, 10 SEGS DCW410 4.5 X 7/8, 15 SEGS DCW411 4.5 X 5/8-11, 15 SEGS DCW412 4.5 X 7/8, 18 SEGS DCW413 4.5 X 5/8-11, 18 SEGS DCW414 5 X 5/8-11, 18 SEGS DCW415 7 X 7/8, 12 SEGS DCW416 7 X 5/8-11, 12 SEGS DCW417 7 X 7/8, 24 SEGS DCW418 7 X 5/8-11, 24 SEGS DCW419 DIAMOND PRODUCTS 27
DIAMOND BLADES ECONOMY SEGMENTED DIAMOND BLADES Economically-priced high speed wheels for use on concrete, paving stones, etc. Great for small jobs. HIGH PERFORMANCE GENERAL PURPOSE BLADES High speed diamond wheels for cutting concrete, paving stones, blocks and brick. 12 X.110 X 1, 20mm DB1101 12 X.110 X 20mm DB1102 14 X.125 X 1, 20mm DB1103 14 X.125 X 20mm DB1104 12 X.125 X1, 20mm DB1201 12 X.125 X 20mm DB1202 14 X.125 X 1, 20mm DB1203 14 X.125 X 20mm DB1204 16 X.125 X 1 DB1205 18 X.142 X 1 DB1206 HIGH PERFORMANCE GENERAL PURPOSE BLADES High speed for wet or dry cutting of asphalt and abrasive types of concrete blocks. HIGH PERFORMANCE Dry or wet asphalt and concrete blocks cutting with high speed or walk behind low powered saws.these blades have a drop down wear protection segments for longer life. Never cut the maximum depth. DIAMOND PRODUCTS HIGH PERFORMANCE HIGH SPEED 12 X.125 X 1, 20mm DB1301 14 X.125 X 1, 20mm DB1302 Dual segmented diamond blades for cutting concrete or asphalt and hard materials like stone. 12 X.125 X 1, 20mm DB1501 12 X.125 X 20mm DB1506 14 X.125 X 1, 20mm DB1502 14 X.125 X 20mm DB1507 16 X.125 X 1, 20mm DB1503 18 X.142 X 1, 20mm DB1504 20 X.142 X 1, 20mm DB1505 12 X.125 X 1, 20mm DB1401 12 X.125 X 20mm DB1402 14 X.125 X 1, 20mm DB1403 14 X.125 X 20mm DB1404 16 X.125 X1, 20mm DB1405 18 X.142 X 1, 20mm DB1406 20 X.155 X1, 20mm DB1407 HIGH PERFORMANCE HIGH SPEED FOR DUCTILE IRON Side ptotection on both sides. 4-1/2 X.060 X 7/8, 5/8 DB0601 5 X.060 X 7/8, 5/8 DB0602 7 X.060 X 7/8, 5/8 DB0603 8 X.060 X 7/8, 5/8 DB0604 10 X.065 X 5/8 DB0605 12 X.080 X 1 DB0606 HIGH PERFORMANCE DEMOLITION BLADE Demolition blade 12 X.250 X 20mm DB0014 14 X.250 X 20mm DB0017 14 X.125 X 1, 20mm DB0013 28
HOLDER TYPE ROLL ON (TWIST ON) Heavy duty rubber pad, aluminum core with removable steel shank. For use with QCD and SCD, R Style (3M, Plastic). HOLDER TYPE SCREW ON TYPE SPEC 1" 291000R "R" Medium 1 1/2" 291500R "R" Medium 2" 292000R "R" Medium 2" 29200RS "R" Soft 2" 29200RF "R" Firm 3" 293000R "R" Medium 3" 29300RS "R" Soft 3" 29300RF "R" Firm Heavy duty rubber pad, aluminum core with removable steel shank. For use with QCD and SCD, S Style (Norton, Metal). BACKUP PADS TYPE SPEC 1" 291000S "S" Medium 1 1/2" 291500S "S" Medium 2" 292000S "S" Medium 2" 29200SS "S" Soft 2" 29200SF "S" Firm 3" 293000S "S" Medium 3" 29300SS "S" Soft 3" 29300SF "S" Firm Abrasive discs backup pads. For use with resin fibre discs and semiflexible spiral-ribbed discs. DESCRIPTION SPEC 4 1/2" X 5/8"-11 294500HD BACKUP PAD, RUBBER AIR COOLED Medium 5" X 5/8"-11 295000HD BACKUP PAD, RUBBER AIR COOLED Medium 7" X 5/8"-11 297000HD BACKUP PAD, RUBBER AIR COOLED Medium 4 1/2" X 5/8"-11 NUT 294500N BACKUP PAD, NYLON Medium 5" X 5/8"-11 NUT 295000N BACKUP PAD, NYLON Medium 4 1/2" X 5/8"-11 NUT EXK1003AP BACKUP PAD, RUBBER Soft 5" X 5/8"-11 NUT EXK1004AP BACKUP PAD, RUBBER Soft 7" X 5/8"-11 NUT EXK1006AP BACKUP PAD, RUBBER Soft NUT 11503004 NUT FOR 294500HD NUT 11503003 NUT FOR 295000HD AND 297000HD ACCESSORIES VELCRO BACKUP PADS Universal velcro pad for sanding discs. Fits any hole pattern. TYPE 5 X 44H 2BPVEL5X44 5/16-24 6 X 52H 2BPVEL6X52 5/16-24 29
FLOOR SANDERS AND STEAM WALLPAPER STRIPPERS HT8 - CLAMP BAR DRUM FLOOR SANDER The rental industry s provenworkhorse. Power & extreme durability Single or Multi-speed controls. HT8-EX - EXPANDABLE DRUM FLOOR SANDER The next generation of rental sanders. Rental friendly slide-on belts. Single or Multi-speed controls. DESCRIPTION SINGLE-SPEED 07006 MULTI-SPEED 07006MS DESCRIPTION SINGLE-SPEED MULTI-SPEED 07006EX 07006EXMS HTF - HIGH SPEED ORBITAL FLOOR SANDER Rental s highest performing orbital sander. Versatile for exterior decks & interior refinishing. Easy to break down & transport. Maximum PSI on sandpaper. HT7 - DISC EDGER HIGH SPEED FLOOR SANDER Highly durable & balanced design. Long-lasting sanding pads. Built-inwrench & cord storage. HIRETECH DESCRIPTION SAFETY SWITCHED 07009 DESCRIPTION SAFETY SWITCHED 07004 HTW - STEAM TEAM HIGH CAPACITY WALLPAPER STRIPPER The rental steam wallpaper stripper. Two-stage anti-scald system. Plug-and-strip design. DESCRIPTION SAFETY VENTED 07181 HTP - HEAVY DUTY WALLPAPER PERFORATOR Unique V shape perforating head and spiral pin pattern. 56 hardened steel pins per roller. Use on all types of wall covering. Perfect partner to the HTW Steam Team wallpaper stripper. DESCRIPTION HEAVY DUTY PERFORATOR 09060 30
PAPER NOTCHED SHEET PAPER PSA 8 X 19-1/2 GRIT 16 P52101F 24 P52102F 36 P52103E 40 P52104E 60 P52106E 80 P52108E 120 P52112E PAPER NOTCHED SHEET 8 X 20 GRIT 16 P36101F 24 P36102F 36 P36103E 40 P36104E 60 P36106E 80 P36108E 120 P36112E PAPER EDGE SANDING DISC PAPER SANDING DISC DRUM SANDER BELT 4-1/2 X 15-3/4 GRIT 24 PPSA41502F 36 PPSA41503E 40 PPSA41504E 60 PPSA41506E 80 PPSA41508E 120 PPSA41512E 15 X 2 8-SLASH GRIT 16 P1501F 24 P1502F 36 P1503E 80 P1508E ABRASIVE SCREEN SANDING DISC 15 X 0 GRIT 60 SS1506 80 SS1508 100 SS1510 120 SS1512 8 X 19 GRIT 16 BA001001 24 BS002001 36 BS003001 40 BS004001 60 BS006001 80 BS008001 120 BS012001 PAPER SANDING DISC PAPER ROLL 7 X 7/8 SLASH GRIT 16 P716F 24 P702F 36 P706E 40 P704E 60 P706E 80 P708E 120 P712E 16 X 2 8-SLASH GRIT 16 P1601F 24 P1602F 36 P1603E 60 P1606E 80 P1608E ABRASIVE SCREEN SANDING DISC 16 X 0 GRIT 80 SS1608 100 SS1610 120 SS1612 8 X 55YRDS GRIT 16 PR0801F 24 PR0802F 36 PR0803E 40 PR0804E 60 PR0806E 80 PR0808E 120 PR0812E FLOOR SANDING PRODUCTS FLOOR PADS FOR ORBITAL SANDERS BY TYPE WHITE RED TAN GREEN BLACK 15" FP15W FP15R FP15T FP15G FP15B 16" FP16W FP16R FP16T FP16G FP16B 17" FP17W FP17R FP17T FP17G FP17B 12" x 18" FP1218W FP1218R FP1218T FP1218G FP1218B 31
HIRETECH PARTS LIST HIRETECH PARTS LIST 000920 Screw Clamp Bar (Screwdriver Slot) 2pk 002104 Clip Wrench 002500 Sanding Pad SL7/B2 (Metal Back) 007507 Label Set 007609 Handle Assembly 007611 Tube Steam Plate 007612 Bracket Steam Tube, 2 pk 007613 Steam Plate Complete 007614 Rivet 4 pk 007623 Spacer Ca stor 4 pk 007624 Castor 4 pk 007626 Label Product Name 007632 Heater 110 V w/ Seal 007633 Heat Sink Compound 007635 Cable Clamp 007636 End Caps Steam Plate 2 pk 007637 Seal Heater 007640 Screw 2 pk 007642 Screw, 12 pk 007645 Screw 4 pk 007654 Tank Assembly 007655 Swivel 2 pk w/ Nut & Olive 007661 Hose Assy (Nut Olive Swivel) 007662 Lead Cut Out Heater 2 pk 007664 Rail 2 pk 007683 Castor Bracket 2 Pk 007685 Label Steam Warning 007686 Nut Swivel 007688 Spacer 2 pk 007697 Olive Swivel 007700 Cover Access 007702 Lead Connect Blk Cut Out 2 pk 007705 Connector Block 007708 Cover Tank Assembly 007710 Lead Heater Earth 007714 Lead Mains 110V 007721 Strain Relief (010080) 007873 Cut Out Double Pole 110/250v 007874 Spacer Cut Out 007876 Label Instructions 007880 Lead Connector Block Tank Earth 007881 Lead Tank Heater Earth 007884 Cap Filler and Chain 007950 Rail Steam Plate Kit 007965 Steam Plate & Rail Kit Complete 008212 Spacer Fan 010010 Screw 4 pk 010050 Cover Motor 010070 Housing Motor 010080 Strain Relief 010100 Cable Main Assembly 110V 010140 Handles 2 pk 010150 Screw Handle 4 pk 010160 Cable Switch Assembly 010170 Brush Block Assembly 010180 Brush Motor 4 pk 010190 Screw 4 pk 010200 Washer 4 pk 010210 Screw 4 pk 010220 Screw Washer 4 pk 010230 Brush Spring 4 pk 010240 Field 110 Volt HT7 010260 Washer Clamp 2 pk 010270 Washer Lock 010280 Screw 2 pk 010290 Baffle 010300 Screw 3 pk 010310 Ring Bearing 010320 Bearing 2 pk 010330 Armature 110V w/bearing,key,seal 010350 Key, 3 pk (915028) 010360 Fan Motor 010370 Gasket 010380 Plate Exhaust 010390 Fan Intake 010400 Ring Retainer 010410 Spacer Bearing 010420 Seal 010430 Ring Retainer 010440 Pinion 010450 Housing Gear 010470 Screw 4 pk 010480 Frame Bag Support 010490 Bag Dust (HT7/HTF) 010510 Clip Wrench 2 pk 010520 Screw 2 pk 010530 Castor & Nut 2 pk 010540 Spring Load 010550 Shaft Drive 010560 Bearing 2 pk 010570 Gear Drive 010580 Ring Retaining 010590 Cover Gear 010600 Spring Load 010610 Screw 3 pk 010620 Guard Disc 010630 Retainer 010640 Shim 4 pk 010660 Washer Clamp (010720) 010670 Bolt Clamp (010720) 010680 Pin Cotter 010690 Wrench HT7/Super 7R 010720 Washer Clamp Bolt Clamp Pin Cotter Kit 010750 Brush Shunt 2 pk 011170 Washer Lock 011270 Grease Edger 011570 Nut Dust Cover 011610 Switch 110 Volt (Bias Off) 011630 Switch Conversion Kit 110V 011720 Castor Adjuster Tool for HT7-2 011730 Sanding Pad/Removal Tool 011731 Service Tool - Sanding Pad Fit 011740 Pinion Fitting/Removal Tool 011840 Insert Bearing 011850 Service Tool - Extractor Gear 011860 Service Tool - Extractor Seal 012310 Sanding Pad (Metal-Backed) 020035 EZ8 Drive Washer 020045 Reversible Paper Clamp 020320 Multi-speed Conversion Kit 110V 024502 Test Lead (NA) 024510 Cover Switch MultiSpeed 024515 Key Pad Switch 024520 Switch Multi Speed 024530 Controller Switch MultiSpeed 110v 024555 Cable Main Assembly MultiSpeed 110v (NA) 024580 Cable Handle MultiSpeed (NA) 024600 Buffer Rubber 024605 Bolt 024615 Screw 6pk 024620 Screw and Washer Set 6pk 024660 Heat Sink Handle Tube 024810 Guard Wall End EX 024815 Guard Drum EX Assy. 024820 Guard Drum Side EX 024822 Guard Drum Front EX 024840 Guide Abrasive Kit 2 Pk. 024845 Spacer Guide Abrasive 5Pk. 024850 Guide Abrasive 024855 Screw Guide Abrasive Main Frame 024860 Nut Lock 024865 Screw Guide Abrasive 024870 Clamp Bearing 024875 Shaft Drum EX 024880 Pulley Drum EX 024885 Bearing Drum Shaft EX 3 Pk. 024890 Spacer Bearing 024895 Washer Drum Shaft EX 024900 Bolt Drum Shaft EX 024915 Clip Guard Drum 024995 Abrasive Guide Retainer 025120 Buffer Guard Drum EX (2pk) 030010 Housing Lower 030020 Housing Gear 030022 Housing Gear 030030 Housing Motor 030040 Frame Handle (Pre SN578) 030042 Frame Handle (Aft SN578) 030050 Pedal Foot 030060 Retainer Wheel 030070 Wheel 2pk 030080 Holder Sanding Pad 030090 Cover Motor 030100 Pin 2 pk 030110 Bush Eccentric 030120 Balance Weight 030130 Shaft Drive 030150 Belt Drive 030170 Bush Pulley 030180 Pulley Drive 030190 Pulley Driven 030200 Pin Pivot 030210 Pin Pivot 030220 Latch 030222 Latch 030230 Bearing Bush 030240 Lever Park 030250 Lever Stop 030260 Spring Latch 030270 Window Lamp 030280 Plate Lamp 030300 Support Bag (New Style) 030310 Support Bag (Old Style) 030320 Housing Eccentric 030330 Spigot Handle 030350 Bumper 030360 Brush Set 030380 Pad Finishing Assembly 030390 Clamp Abrasive 030400 Bush Sanding Pad 2 pk 030410 Plate Cover 030425 Housing Switch Assembly 030440 Cap Retaining 030450 Clamp Handle 030460 Bearing 3 pk 030470 Bearing 030480 Clip 2 pk 030490 Clip 2 pk 030500 Clip 030510 Key 030520 Spring Sanding Pad 2 pk 030530 Bush 3 pk 030550 Washer 2 pk 030580 Pin Pivot 030600 Spring Plunger 2 pk 030630 Stop Rubber 030640 Handle Lamp Neon 030660 Cable Main Assembly 110/120V 030720 Ballast Start 110/120V 030730 Holder Lamp 030740 Screw 2 pk 030750 Lamp 030760 Screw 2 pk 030770 Screw 2 pk 030780 Screw 030790 Screw 4 Pk 030820 Screw 7 pk 030830 Screw 2 pk 030840 Screw 2pk 030850 Nut 2 pk 030860 Washer 3pk 030890 Clip Handle Knob 030910 Tube Handle 030920 Screw 030930 Handle Cable 030940 Handle Cable 030950 Lead Neon 2 pk 030990 Lead Motor 031010 Bolt 4 pk 031020 Wing Nut 031040 Lead Lamp/Ballast 031050 Lead Lamp/Twistlock 031060 Lead Ballast/Twistlock 031070 Lead Ground (Earth) 031090 Screw 6 pk 031120 Screw 16 pk 031130 Nut 16 pk 031160 Screw 031170 Screw 031180 Screw 031280 Bush Insulator 031300 Plug Bearing 031310 Cap Sanding Weight 031320 Sanding Weight HTF 031330 Bearing Washer 2 pk 031370 Hook and Loop Pad 031400 Base Twist Lock 031420 Exhaust Guard 031430 Ring Retainer 031450 Screw 031490 Service Tool 031520 Spacer Pulley 031610 Service Tool - Jacking Bolts 031650 Knob Bag Support 031660 Washer Lock 031790 Pin Pivot 2 pk 031800 Bush Bearing 2 pk 031810 Screw 031820 Screw 031830 Cover Screw 031840 Spring Latch Return 031850 Screw 2 PK 031870 Grip Hand 031880 Spacer Latch Pivot 031890 Washer 031900 Bolt 031910 Nut 032000 Field 110v HTF 062003 Clamp Bearing 2 Pk 07039 Dust Bag Paper HT8/ DU8 Cs 50 07040 Dust Bag Paper HT7/ HTF Cs 50 100325 Service Tool - Clamp Drum Cover 100327 Screw, 13 pk 100337 Cable Handle 220V 101205 Strain Relief HTF 101206 Nut Lock 101219 Floor Roller Assembly 101220 Strain Relief Handle Cable 160408 Armature 110V w/ Bearings+Keys 160504 Adjuster Floor Roller 160809 Bracket Exhaust 160815 Bracket Handle 160820 Bracket Handle Kit Complete (Metal) 161108 Bush Bearing 162006 Clamp Bearing 162007 Clamp Paper (3 hole) 162019 Clamp Handle 162021 Clamp Bearing 2 pk 162312 Drum Cover Kit 162532 Drum Assembly Complete 163004 Fan Intake 163008 Fan Motor 163012 Assembly Fan Intake 163104 Field Assembly 110V 163201 Frame Main 163202 Main Frame EX 163304 Flange Pulley 3 pk 163403 Gasket Exhaust 163604 Guard Brush (DU8X) 163616 Guard Drum (Metal DU8) 163618 Key Paper Clamp (DU8) 163622 Screw 5 pk 163625 Plug Dust 163633 Castor and Lock Nut 163634 Caster Cover Nut (HT7-1) 2pk 163636 Cover Inlet 163668 Lifting Pin Assembly 163682 Bearing Armature 2 pk 163691 Strain Relief 163754 Dust Cover (Rocker Switch) 163789 Block Brush Assy 163790 Tube Exhaust 163791 Guard Belt 163792 Guard Wall End 163795 Guard Drum Assy w/ Label 163796 Bag Dust (HT8/DU8) 163802 Handle Right Hand 163803 Vent Plug 2 pk 163804 Strain Relief Handle Cable 163805 Motor Brush Cover L.H. 163806 Handle Left Hand 163807 Bag Dust (Super 7) 163813 Screw 2 Pk 163814 Screw 3 Pk 163815 Screw 163822 Drum Insert Removal Tool 163823 Retainer Bag 163826 Retainer Dust Bag Disposable (6pk) 163834 Super 7 Disposable Bag Conversion Kit 163835 Exhaust Bracket Conversion Kit-SL7 163836 Exhaust Bracket Conversion Kit-B2 163837 Bracket Switch 163838 Screw 2 pk 163839 Switch 110 Volt 163840 Cover Switch (Gasket Screws) 163843 Switch Conversion Kit 110V 163844 Handle Assy Complete 163849 Dust Cover w/ Screws 163857 Adjuster Tool 163865 Service Tool - Locking Drum 163866 Cover Motor Brush R.H. 163867 Lead Earth Base Twist Lock 163869 Belt Guard Screw 4 pk 163870 Gasket Cover Switch 163871 Screw Switch Housing 4 pk 163906 Handle Single Grip 163907 Handle Cross 164004 Holder Brush Motor 4 pk 164202 Housing Fan 164508 Hook Cable 164607 Insert Drum (press in) 3 pk 165103 Lift Hear Label 166172 Baffle Motor 166234 Plate Drum Cover (DU8X) 166906 Pulley Fan 2 Pk 166909 Pulley Motor 166916 Pulley Drum 167204 Retainer Baffle 167208 Retainer Brush Block 167210 Retainer Seal 167302 Ring Retaining 167308 Ring Retaining 167312 Ring Retaining 167404 Rod Drum Guard 167608 Seal Fan 167704 Shaft Fan 167708 Shaft Floor Roller 167716 Shaft Drum w/shear Pin 167802 Shield Pulley 167804 Shield Wall End 167902 Shoe Intake 167905 Shoe Intake EX 168104 Sleeve 168203 Spacer Fan Bearing 168206 Spacer Bearing 168209 Spacer Bearing 168212 Spacer Motor Pulley 168324 Spring Brush 4 pk 169012 Handle Tube 169015 Tube Handle MultiSpeed 169504 Weight Balance 169704 Roller Floor w/bearing 2Pk 280678 Screw (3 hole bar) 3 pk 293406 Gasket Exhaust Bracket 301102 Bushing 301307 Brush Block 302308 Cover Motor 304204 Gear Housing 304207 Housing Motor 316804 Plug Gearbox (HT7-1/S7R) 467308 Ring Retaining 4 pk 497504 Strain Relief DU8 519501 Cable Main Assembly 110V 519510 Cable Handle 902550 Bearing Drum Shaft 2 pk 902567 Bearing (fan/roller) 4 pk 903260 Belt Drum (3/4 ) 903273 Belt Fan (1/2 ) 908989 Mains Lead 110V 911045 Base Twist Lock 911046 Body Twist Lock 911216 Fuse (DU8) 2 pk 911375 Switch 120/240 (Toggle) 911629 Lead Switch 911662 Lead Motor Assembly 911954 Brush Shunt Assembly 2 pk 915028 Key 6 pk 920132 Nut 3 pk 920148 Nut 920256 Nut 925113 Pin Drum Shaft 960180 Clamp Handle Bracket 960183 Bracket Handle Cross 962003 Screw 4 pk 962084 Screw 4 pk 962103 Screw 962109 Screw 8 pk 962139 Bolt 2 Pack 962170 Screw 962188 Screw 962204 Screw 5 pk 962244 Bolt 5 pk 962264 Screw 2pk 962308 Screw 962345 Screw 10 pk 962401 Screw 2 pk 962402 Bolt w/ Nut 962404 Screw 4 pk 962409 Screw 962411 Screw 962454 Screw 2pk 962487 Screw 8 pk (HT71-S7R) 980004 Spacer 2 Pk 980196 Washer 980197 Washer 980615 Washer 2 Pk 980623 Washer 980626 Washer Lock 3 pk 980629 Washer 980648 Washer 2 Pk 980652 Washer 2 pk 990000 Insert Drum (threaded) 3 pk 32
NOTES 33
TERMS & CONDITIONS CND ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. PAYMENT TERMS 1% 10 DAYS, NET 30 CURRENCY All prices in CAD unless otherwise specified. MINIMUM ORDER $50.00 CAD (Excludes Samples). PREPAID SHIPPING Extreme Abrasives ground or best way shipping will be prepaid on all shipments within Canada valued $750.00 or more. Some restrictions apply. TERMS AND CONDITIONS TRANSPORT Unless prepaid freight is the responsibility of the purchaser. If requested shipment could be prepaid and charged. PICK UP ORDERS All pick up orders are subjected to two hours advance notice and confirmation for stock items only. SHIPMENT TO ADDRESSES DIFFERENT THAN PURCHASERS Any shipments to a destination other than the purchaser address are subject to additional charges. SAMEDAY SHIPMENTS Order for stock items placed by 12 Noon Eastern Standard Time will be shipped the same day. LEAD-TIME Regular/stock (shaded items indicates stock) items will be shipped on same or next business day. Private label items will be shipped in three business day (subject to labels availability) where as all special items will be shipped in five business day. Any variance would be highlighted on the order acknowledgement. SPECIAL ORDERS AND NON-INVENTORY ITEMS Special orders and non-inventory items will be considered complete upon shipment of ± 10% of quantity ordered. TAXES HST and GST will be charged on all orders within Canada. There are no taxes for export. ORDER CONFIRMATION All order acknowledgements will be sent via email or fax on customer request within 24 hours. Please ensure that Extreme Abrasives item numbers are used on all POs. We confirm all orders using Extreme Abrasives numbers. Missing or inaccurate numbers may delay order confirmation. STANDARD PACKAGING Standard package quantities are shown in the price list. Orders will be processed at full package quantities only. SHORTAGE AND DAMAGED GOODS Any claims for loss or damage in transit must be made against the carrier by consignee. All other shortage claims must be made within 10 working days of date of invoice. DELIVERY TIMES Stock items 24 hours or less for non-stock items 5 workdays if material available. SELLING QUANTITY All items are sold in packages. The minimum order per item is one package. Custom and retail packaging available on request. SAMPLES Available upon request and are excluded from minimum order requirement. Samples are free of charge. 34
PRODUCT WARRANTY Extreme Abrasives warrants merchandise to be free from all defects. The end user assumes all other risks, if any. Our liability for any and all claims, damages, losses and injuries arising out of relating to its performance or breach of any agreement of sales of the products and the manufacture, sales, delivery, resale repair or use of any product shall not exceed the purchase price of the product. It will be our option to either refund or replace products. In no event shall Extreme Abrasives be liable for incidental, special or consequential damages, including but not limited to loss of profits, business, goodwill, incurring of any down time, destruction or loss of any capital goods, liability for personal injury, death, property damage and any other type of damages, whether similar to or different from this listing. It is our policy to cooperate with our customers by accepting the return of Extreme Abrasives products under the following conditions: EXTREME ABRASIVE S RETURN POLICY All returns must have a Return Goods Authorization number prior to return. If Extreme abrasives incorrectly fill your order, the merchandise is returnable upon authorization, via freight collect for full credit. The merchandise must be in original package and saleable. A written request, complete product and invoice information, quantity of items being return, no later than 12 months from date of purchase. Extreme abrasives reserves right to select only saleable items for return Special items custom made for customers can not be return. Return authorization numbers are valid for 45 days from the issue date and they should be clearly marked on all paper work. CUSTOMER REQUESTED RETURNS FOR REASON OTHER THAN SUPPLIERS ERORS Return freight must be prepaid by customer. Only merchandise listed in the current price list qualifies for return. Merchandise must be in Full Package quantities and in saleable condition. No part packages are allowed. Customer invoice date for product must be within 6 months of requested return date. Non stock, specials, and private labeled products are not returnable. Returns must be offset by a new order for the equivalent amount. Credit will be subject to a 15% re-stocking charge. No returns will be accepted after 180 days from date of invoice. EXTREME ABRASIVES MAKES IT CONVENIENT TO PURCHASE QUALITY ABRASIVES Extreme Abrasives is one of the North American leaders in Coated Abrasives Conversion. Not only that we provide quality product at competitive price but also provide customized solutions for cutting, grinding and finishing needs. Most of our products are manufactured in Mississauga, Canada, with focus on servicing customers in North America. PLACING ORDERS WITH US IS EASY phone: 905 282 1313 fax: 905 282 1315 e-mail: sales@extremeabrasives.com web: (coming soon) payment: we accept cretit cards payment All orders are confirmed within 2 hours. There are many items in stock for same day shipments. No cost private labeling for qualified customers. Rush service at no extra charge if situation arise. Extreme Abrasives and its products are fully covered under insurance policy. For samples request or technical help please contact our sales team. TERMS AND CONDITIONS ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENT. ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. This catalog may be reproduced without written permission. We reserve the right to update this catalogue without prior notice. We are not responsible for any printing errors. 35
E TREMEINNOVATION Your local representative