Meets DIN2270 or BS2795 standard Satin chrome finish, brass body, anti-magnetic Jeweled bearing, shock-proof Interchangeable carbide contact point, 0.0787 /2mm diameter ball, supplied with wrench Probe length: 0.530 /13.5mm Two holding stems: 0.156 /4mm and 0.375 /8mm Inch 0-0.03 0.0005 1.18 816170 Metric 0-0.8 0.01 30 816168 Meets DIN2270 standard Satin chrome finish, brass body, anti-magnetic Jeweled bearing, shock-proof Interchangeable carbide contact point, 0.0787 diameter ball, supplied with wrench Probe length: 0.53 Two holding stems: 0.156 and 0.375 diameter 0-0.03 0.001 1.18 282858 0-0.03 0.0005 1.48 282860 Steel contact point, 0.0787 /2mm diameter ball Probe length: 0.625 /16mm Holding stem: 0.156 /4mm Long Test Indicators Inch ±0.06 0.0005 1.51 816174 Metric ±1.6 0.01 38.4 816176 949
Test Indicators Dial Test Indicator Contact Points For dial test indicators: 282855, 282856, 282857, 282858, 282859, 282860, 282861, 282866, 816168, 816170, and 816172 Material L D A Steel 13.5 M1.6 x 0.2 1 282869 Steel 13.5 M1.6 x 0.2 2 282870 Carbide 13.5 M1.6 x 0.2 2 282871 Ruby 13.5 M1.6 x 0.2 2 282872 Steel 13.5 M1.6 x 0.2 3 282873 Set the indicator at a desired position Stem 8mm 282879 0.25 282880 Includes dovetail holder Stem Section Stem Length Clamp Hole Universal Test Indicator Holder Test Indicator Holder 9 x 9 100 4 and 8 282876 A B 1/4 5/32 282875 8mm 4mm 282874 Test Indicator Holder 950 ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
BESTEST and TESATAST Bestest Black Face BESTEST 5-Series (Black face) are furnished with a 0.080 carbidecontact point, a 0.250 diameter extension with dovetail, point wrench and a certificate of accuracy and traceability in a durable molded case. Smallest Division Dial Point Length 0.02 0-10-0 0.0005 1-1/2 1-7/16 815198 Tesatast Inch Reading TESATAST is furnished with 0.08 (2mm) carbide contact point, a 0.31 (8mm) diameter extension with dovetail, a point wrench and a certificate of accuracy and traceability in a durable molded case. Smallest Division Dial Point Length 0.03 0-15-0 0.001 1 1/2 815210 0.03 0-15-0 0.0005 1 1/2 815211 0.008 0-4-0 0.0001 1 1/2 815213 0.008 0-4-0 0.0001 1-1/2 1/2 815214 0.008 0-4-0 0.00005 1-1/2 1/2 815215 951
For measurements at 12º Revolution counter Inclined, easy to read dial One piece, solid case High rigidity Very high sensitivity, very light measuring pressure Jeweled mechanism fitted with ball bearings Fully reversible, swiveling through 210º without reversing lever Hard steel or tungsten carbide contact points Variety of mounting positions Horizontal and Vertical Dial indicator includes tungsten carbide 0.080 (metric, chrome plated 2mm) diameter ball tip contact point, in a plastic case with one contact point wrench Horizontal Style Graduation Dial Interapid Model 0.06 0-15-0 0.0005 1.0 312B-2 815221 0.06 0-4-0 0.0001 1.5 312B-3 815223 Vertical Style Graduation Dial Interapid Model 0.06 0-15-0 0.0005 1.5 312B-1V 815225 0.06 0-15-0 0.0005 1.0 312B-2V 815226 Vertical Set Indicator with Accessories 815226 815236 Dial test indicator included 952 ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
All test indicators are magnetic proof and have jeweled bearings Stainless steel stylus lever is detachable with easy screw mount Contact point is made of carbide for minimum wear Contact point can be set at any angle within 200º adjustment Compact size, light weight, durable and vibration proof Low pressure contact for measuring thin materials Miniature bearing at rotating axle ensures stable reading Auto clutch eliminates a bias lever. Point moves freely in both directions Contact point can be set within 230º adjustment Auto Clutch Type Teclock Graduation Bezel Reading 0.8mm 0.01mm 28mm 0-40-0 840331 0.03 0.0005 1-3/8 0-15-0 840333 0.03 0.001 1-3/8 0-15-0 840335 0.01 0.0001 1-3/8 0-15-0 840337 Value Graduation Bezel Reading 0.03 0.0005 1-3/8 0-15-0 840374 Dual Reading Inch/Metric Test Indicator Dial face diameter is 1.58 Outer graduations are in inch and inside graduations are in metric 282866 Large Face 953