> > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly on spool > > Wide range of low power solenoids Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Operation: Spool Valve, indirectly actuated Mounting: Through-holes in valve body It is recommend that valves should be mounted with the axis of the spool horizontal. Port sizes: G/8 & G/4 Operating Pressure: Maximum 0 bar. For details see overleaf. Ambient/Media temperature: Solenoid pilot actuated valves +5... + C (+4... + F) Air pilot actuated valves 0... +80 C (+... +76 F) Air supply must be dry enough to avoid ice formation at temperatures below + C (+5 F). Materials: Body: Die cast aluminium alloy End cover: Aluminium or glass filled nylon Seals: NBR Flow Characteristics Size Function l/min Cv Kv G/8 /,5/ 5 0,4 0,5 G/4 /,5/ 65 0,8 0,85 Electrical details for solenoid operators Voltage tolerance ± 0% Rating 00% continuous duty Inlet orifice,0 mm (low power),6 mm (high power) Electrical connection Industrial Standard, mm (corresponding to choosen coil) Solenoid coil mounting Four positions x 0 Manual override Push and turn to lock (plastic) Protection class IP 65 (with sealed plug) without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. 5/8 en 5..460.0
/ solenoid operated valves Symbol Port Function Actuation Operating Solenoid Solenoid Voltage Power Manual Weight Drawing Model *) size pressure pilot mounting override (bar) position (Watts) (Kg) No. G/8 / NC Solenoid - Spring... 0 Internal Side Without coil High Without M/O 0.4 4000 G/8 / NC Solenoid - Spring... 0 Internal End Without coil Low With M/O 0.6 48G000 0 G/8 / NC Solenoid - Spring... 0 Internal End 4 V DC W With M/O 0.6 48G04 G/8 / NC Solenoid - Spring... 0 Internal End Without coil High With M/O 0.6 48M000 G/8 / NC Solenoid Priority - Pilot... 0 Internal End Without coil Low Without M/O 0. 4840L000 0 G/4 / NC Solenoid - Spring... 0 Internal Side Without coil High Without M/O 0.56 4 4000 G/4 / NC Solenoid - Spring... 0 Internal Side Without coil Low With M/O 0.56 4 4G000 G/4 / NC Solenoid - Spring... 0 Internal Side Without coil Low Without M/O 0.56 4 4L000 0 G/4 / NC Solenoid - Spring... 0 Internal Side 4 V DC W Without M/O 0.56 4 4L04 G/4 / NC Solenoid - Spring... 0 Internal End Without coil High With M/O 0.5 5 4M000 G/4 / NC Solenoid - Spring... 0 Internal End 4 V DC W With M/O 0.5 5 4G04 *) Standard model numbers in Bold Seal Kit / solenoid operated valves Port Size Seal Kit 4.. G/8 X4000 4. G/4 X4000 5/ solenoid operated valves Symbol 4 4 5 4 4 5 4 4 5 Port Function Actuation Operating Solenoid Solenoid Voltage Power Manual Weight Drawing Model *) size pressure pilot mounting override (bar) position (Watts) (Kg) No. G/8 5/ Solenoid - Spring - 0 Internal Side Without coil High Without M/O 0. 6 X450000 G/8 5/ Solenoid - Spring - 0 Internal Side Without coil Low With M/O 0. 6 X45G000 G/8 5/ Solenoid - Spring - 0 Internal Side 4 V DC W With M/O 0. 6 X45G04 G/8 5/ Solenoid - Spring - 0 Internal Side Without coil Low Without M/O 0. 6 X45L000 G/8 5/ Solenoid - Spring - 0 Internal Side 0 V AC 4/.5 VA With M/O 0. 6 X4555G0 G/8 5/ Solenoid - Spring - 0 Internal Side 40 V AC /8 VA With M/O 0. 6 X4555M40 G/8 5/ Solenoid - Spring - 0 Internal End Without coil High Without M/O 0.6 7 X4850000 G/8 5/ Solenoid - Spring - 0 Internal End Without coil Low With M/O 0.6 7 X485G000 G/8 5/ Solenoid - Spring - 0 Internal End 4 V DC W With M/O 0.6 7 X485G04 G/8 5/ Solenoid - Spring - 0 Internal End Without coil High With M/O 0.6 7 X485M000 G/8 5/ Solenoid - Spring - 0 Internal End 40 V AC /8 VA With M/O 0.6 7 X48555M40 G/8 5/ Solenoid - Solenoid - 0 Internal Side Without coil High Without M/O 0.6 8 X4500000 G/8 5/ Solenoid - Solenoid - 0 Internal Side 4 V DC 6 W Without M/O 0.6 8 X450004 G/8 5/ Solenoid - Solenoid - 0 Internal Side Without coil Low Without M/O 0.6 8 X450L000 G/8 5/ Solenoid - Solenoid - 0 Internal End Without coil High Without M/O 0.56 X485800000 G/8 5/ Solenoid - Solenoid - 0 Internal End 4 V DC W With M/O 0.56 X48580G04 G/4 5/ Solenoid - Spring - 0 Internal Face Without coil High Without M/O 0.67 0 X450000 G/4 5/ Solenoid - Spring - 0 Internal Face Without coil Low With M/O 0.67 0 X45G000 G/4 5/ Solenoid - Spring - 0 Internal Face 0 V AC /8 VA Without M/O 0.67 0 X4550 G/4 5/ Solenoid - Spring - 0 Internal Side Without coil High Without M/O 0.67 X450000 G/4 5/ Solenoid - Spring - 0 Internal Side 4 V DC 6 W Without M/O 0.67 X45004 G/4 5/ Solenoid - Spring - 0 Internal Side Without coil Low With M/O 0.67 X45G000 G/4 5/ Solenoid - Spring - 0 Internal Side Without coil Low Without M/O 0.67 X45L000 G/4 5/ Solenoid - Spring - 0 Internal Side 4 V DC W Without M/O 0.67 X45L04 G/4 5/ Solenoid - Spring - 0 Internal End Without coil High Without M/O 0.67 X450000 G/4 5/ Solenoid - Spring - 0 Internal End Without coil Low With M/O 0.67 X45G000 G/4 5/ Solenoid - Spring - 0 Internal End 4 V DC W With M/O 0.67 X45G04 G/4 5/ Solenoid - Spring - 0 Internal End Without coil High With M/O 0.67 X45M000 G/4 5/ Solenoid - Spring - 0 Internal End 4 V DC 6 W With M/O 0.67 X45M04 G/4 5/ Solenoid - Spring - 0 Internal End 0 V AC /8 VA With M/O 0.67 X4555M0 *) Standard model numbers in Bold en 5..460.0 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. 5/8
5/ solenoid operated valves Symbol 4 4 5 Port Function Actuation Operating Solenoid Solenoid Voltage Power Manual Weight Drawing Model *) size pressure pilot mounting override (bar) position (Watts) (Kg) No. G/4 5/ Solenoid - Solenoid - 0 Internal Side 4 V DC 6 W With M/O 0.67 X450M04 G/4 5/ Solenoid - Solenoid - 0 Internal Side Without coil Low Without M/O 0.67 X450L000 G/4 5/ Solenoid - Solenoid - 0 Internal Side Without coil Low With M/O 0.67 X450G000 G/4 5/ Solenoid - Solenoid - 0 Internal Side Without coil High Without M/O 0.67 X4500000 G/4 5/ Solenoid - Solenoid - 0 Internal End 4 V DC 6 W With M/O 0.6 4 X4580M04 G/4 5/ Solenoid - Solenoid - 0 Internal End 4 V DC W With M/O 0.67 4 X4580G04 G/4 5/ Solenoid - Solenoid - 0 Internal End Without coil High With M/O 0.6 4 X4580M000 G/4 5/ Solenoid - Solenoid - 0 Internal End Without coil High Without M/O 0,6 4 X45800000 *) Standard model numbers in Bold Seal Kit 5/ solenoid operated valves Port Size Seal Kit X4.. G/8 X4000 X4. G/4 X4000 Spare coils and alternative voltages mm coil -,0 mm orifice (low power) for connector interface acc. to industrial standard Voltage Power Inrush/Hold Model V d.c W QM/48/J/ 4 V d.c W QM/48/J/ 4 V a.c. 4/,5 VA QM/48/4J/ 0/0 V /60 Hz 4/,5 VA QM/48/8J/ 0/40 V /60 Hz 6/5 VA QM/48/J/ mm coil -,6 mm orifice (high power) for connector interface acc. to industrial standard Connector plugs - ordered separately Industrial standard mm -pole + PE 0657868000000000 Voltage Power Inrush/Hold Model V d.c 7,5 W QM/48/8J/ 4 V d.c 6 W QM/48/8J/ 4 V a.c. /8 VA QM/48/84J/ 0/0 V /60 Hz /8 VA QM/48/88J/ 0/40 V /60 Hz /8 VA QM/48/8J/ 5/8 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. en 5..460.0
/ Air pilot actuated valves Symbol Port size Function Actuation Operating pressure (bar) Pilot pressure Weight (Kg) Drawing No. Model *) G/8 / NC Pilot - Spring -0.... 0... 0 bar 0. 5 04 0 G/8 / NC Pilot - Spring -0.... 0 4... 0 bar 0. 6 0400 + G/8 / NC Pressure or Vacuum - Spring -0.... 0 0.... or 0.4 Vac (min) 0. 7 0700-0 G/8 / NC Pilot - Pilot -0.... 0... 0 bar 0. 8 04070 0 G/8 / NC Pressure Priority - Pilot -0.... 0... 0 bar 0.5 040 0 0 G/4 / NC Pilot - Spring -0.... 0... 0 bar 0.4 0 0600 G/4 / NC Pilot - Spring -0.... 0 4... 0 bar 0.4 0 06 M4 x.5 / NC Pilot - Spring -0.... 0... 0 bar 0.4 060M 0 G/4 / NC Pilot - Pilot -0.... 0... 0 bar 0.4 06070 + G/4 / NC Pilot Priority - Pilot -0.... 0... 0 bar 0.4 060-0 *) Standard model numbers in Bold 5/ Air pilot actuated valves Symbol 4 Port size Function Actuation Operating pressure (bar) Pilot pressure Weight Drawing Model *) (Kg) No. G/8 5/ Pilot - Spring -0.... 0... 0 0. 4 X440 4 5 4 G/8 5/ Pilot - Pilot -0.... 0... 0 bar 0.5 5 X40 4 5 4+ 4-4 5 4 G/8 5/ Pressure or Vacuum - Spring -0.... 0 0.... or 0.4 Vac (min) 0.55 6 X00 G/8 5/ Pressure Priority - Pilot -0.... 0... 0 0. 7 X450 4 5 4 G/4 5/ Pilot - Spring -0.... 0... 0 0. X640 4 5 4 G/4 5/ Pilot - Pilot -0.... 0... 0 0.57 X60 4 5 4 G/4 5/ Pilot Priority - Pilot -0.... 0... 0 0.57 X650 4 5 *) Standard model numbers in Bold Seal Kit / air pilot actuated valves Port Size Seal Kit 04. G/8 040 0700 G/8 0700 06. G/4 060 Seal Kit 5/ air pilot actuated valves Port Size Seal Kit X4. G/8 040 X00 G/8 0700 06. G/4 060 en 5..460.04 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. 5/8
G/8 45 Models / Single Solenoid Valves G/8 485 Models / Single Solenoid Valve 0 7 0,45 ʻʼ ʻʼ ʻ0ʼ 0 ʻʼ 0 max. ʻʼ 5,5 5 56 45,8 5 87,5 5,7 Spool manual override only available on models with M or G G/8 484 Models / Solenoid Priority Set, Pilot Reset Valves G/4 45 Models / Single Solenoid Valves 4 7 0,5 0 ʻʼ ʻʼ ʻ0ʼ ʻʼ,5 ʻʼ,5 56 45,8 max 8,5 4 5 0 4,7 0,5 Spool manual override only available on models with M or G 5/8 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. en 5..460.05
G/4 45 Models / Single Solenoid Valve G/8 X45 Models 5/ Single Solenoid Valves 5 6 8,5 0 0 0 ʻ4ʼ ʻ4ʼ ʻʼ ʻʼ 56,5,5 ʻ5ʼ ʻʼ ʻʼ 40,8 54,5 4,5 0 max 0 0 5 5,6 0,5 Spool manual override only available on models with M or G G/8 X4855 Models 5/ Single Solenoid Valve 7 7 0 0 4 4 5 56 0 0 45,8 5 58 en 5..460.06 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. 5/8
G/8 X45 Models 5/ Double Solenoid Valves 8 7 0 0 7 4 4 5 56 45,8 5 0 0 4 G/8 X4858 Model 5/ Double Solenoid Valve 0 G/4 X455 Models 5/ Single Solenoid Valves 0 0 4,5 4 4 (X4 757) 5 54,5 0 max 0 max 0 0 4 4 5 5 84 max 4,5,5 7 Spool manual override only available on models with M or G Spool manual override only available on models with M or G 5/8 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. en 5..460.07
G/4 X45 Models 5/ Single Solenoid Valves G/4 X455 & X45 Models 5/ Single Solenoid Valve 0 0 8,5 4,5 4 4 4 4 0 max 5 0 0 5 54,5 5 56,5 40,8 G / (x4 5) 0,5 74 Spool manual override only available on models with M or G G/4 X45 Models 5/ Double Solenoid Valves,5 0 4 4 5 max,5 max Spool manual override only available on models with M or G en 5..460.08 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. 5/8
G/4 X458 Models 5/ Double Solenoid Valves 4,5 4 4 5 56,5 40,8 G/8 04 Model / Single Pilot Valve 5 G/8 0400 Model / Single Pilot Valve 6 7 6 0 6 0 0 0 4 0 0 4 8 8 5/8 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. en 5..460.0
G/8 0700 Model / Single Diaphragm Pilot Valve 7 G/8 04070 Model / Double Pilot Valve 8 7 0 6 6 0 0 0 40 0 0 4 88 Ø 70 VACUUM,5 7,5 G/8 040 Model / Pilot Priority Valve G/4 0600 & 06 Models / Single Pilot Valves 0 5 4,5 6 0 0 40 0 0 4 88,5,5 40 en 5..460.00 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. 5/8
M4 x.5 060M Model / Pilot G/4 06070 Model / Pilot Priority Valve 0 4 4.6,5.0 0 ʻʼ ʻʼ 0.5 40.0,5,5 40 holes Ø 6.5 - port M0 x.0 - ports M4 x.5 (parallel) G/4 060 Model / Double Pilot Valve G/8 X440 Model 5/ Single Pilot Valve 4 0 4,5 60,5 0 0 7,5 40 0,5 6 4 4 5 0 0 06 5/8 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. en 5..460.0
5 60,5 6 60,5 0 0 0 0 7 6 4 4 5 0 0 6,5 5 4 4 5 0 0 5,5 Super X G/8 X40 Model 5/ Double Pilot Valve G/8 X00 Model 5/ Single Diaphragm Pilot Valve 6 Ø 70 VACUUM,5 G/8 X450 Model 5/ Pilot Priority Valve G/4 X640 Model 5/ Single Pilot Valve 7 60,5 65 0 0,5 6 4 4 5 5 0 0 0,5 4 4 5,5 40 7 en 5..460.0 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. 5/8
G/4 X60 Model 5/ Double Pilot Valve G/4 X650 Model 5/ Pilot Priority Valve 65 65,5,5 4 4 4 4 5,5 40 40 6 5,5 40 40 6 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, Norgren GmbH. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 5/8 without notice, the specifications given in this document. (8-6b) 05 Norgren Ltd. en 5..460.0