60 Our most popular series. This exceptional caster has been used for over 75 years in thousands of industrial and institutional applications. All wearing parts are heat treated to last longer, even under the most demanding applications. No other caster will outlast or outperform the Darnell 60 Series. Typical applications include: Shop Carts & Equipment Wire Carts and Racks Food Equipment Medical Devices Instrument Cases Stage & Theater Sets Moving Dollies Standard finish is Zinc Plating. Available with numerous plate and stem options, as well as brakes, swivel locks, special finishes. Quality Medium Duty SWIVEL for 5/16" Bolts RIGID : 175 to lbs. Features FOUR-SIDED, DOUBLE BALL RACEWAY. Hardened steel ball bearings touch upper and lower swivel raceway on all four sides. This protects the central king pin from shock loading for free swiveling under heavy loads. HEAT-TREATED MOVING PARTS. All moving parts are hardened to a precise molecular depth and Rockwell hardness. This extends caster life under rugged conditions and shock loads. RACEWAY DUST CAP. Dust cap protects the raceway from contamination by dust, dirt, moisture, and other debris. TWO-PIECE RIGID CASTER. Rigid caster utilizes a welded top plate and yoke design instead of a one-piece stamped yoke as used on competitive brands. THREAD GUARD. Keep unwanted materials out of the wheel bearings thus increasing the life of the caster. Standard on most wheels. Options FOUR SIDED DOUBLE BALL BEARING RACEWAY 60 King Pin (Rivet) Top Plate Cart Washable Grease Seals Maintenance Free Bearings High-Temperature Wheels Conductive or Static- Dissipative Wheels Gray, Non-Marking Wheels Powder Coated Finishes.187 Dust Cap Wheel Selection Ball Bearings (ø.50 Upper Race) Ball Bearings (ø.187 Lower Race) Yoke HI-CAP NEOPRENE Retaining Washer (Reinforcing Washer) ø.500 EXTRA-SOFT NEOPRENE Upper Raceway (Top Cap) Lower Raceway (Ball Retainer) STEEL DISC
TOP PLATE STANDARD -5/8" -7/8 to " Slotted for 5/16" Bolts ALTERNATES " " for 5/16" Dia. Bolts # #1 " " 5 " " for /8" Dia. Bolts " " 1-/" -1/8" -/8" for 1/" Bolts -1/ to -5/8" So ed for /8" Dia. Bolts #0 #6 # -1/8" -/8" -/" -5/8 to " STEMS O STEM TABLE L D /"- 1-1/ LP stem BRAKES Dimension D *1/ 5/8" */" 1" Dimension L 1-1/ Stem Number O60-1-11 O60-58- O60-- O60-78- O60-1-1 Other stem sizes and dimensions available. *Special Order/Minimum Quantity /"- 1-1/ LPC stem T E STEM TABLE " D L STEM TABLE L T Dimension D ROUND SQUARE /" /" 1" 1" 1-1/16" 1-1/8" 1-1/8" 1-1/" 1-1/" 1-/8" 1-/8" 1-1/ 1-7/16" 1-5/8" 1-1/ 1-/" 1-9/16" 1-5/8" 1-/" 1-1.9" Dimension T Dimension L 1/-1 1-1/ 1/-1 5/8"-11 *5/8"-11 /"-10 1-1/ /"-10 /"-10 Stem Number L60-11-11 L60-11- L60-5811- L60-5811-1 L60-10-11 L60-10- L60-10-1 Other stem sizes and dimensions available. *Special Order/Minimum Quantity round stem square stem Subtract.187" from overall height for stem casters. 1" /" 1-/" /8" Wheel Brake (WB) Radial Brake (RB) Four Lock (SL) Lock Free Free Lock Free Lock Operates by a foot pedal lever that has a rubber brake pad to form a positive brake action when the brake lever is pressed down to engage. To restore back to the normal position, simply reverse the action to disengage the brake. Easy to operate and trouble free. Not available in. Available on Darnell-Rose s most popular Medium Duty Industrial Casters. Exceptional brake for light and medium duty applications, either industrial or institutional. Side pedal engages tread lock to restrain wheel movement. Brake kit available for field installation. Not available in, 5-1/, 6" or 8". A horizontal four position swivel lock with a spring-loaded plunger to securely hold the swivel in the slotted position desired. Plunger can be put into a neutral position for free swiveling action. HUB MOLD-ON POLYURETHANE POLYURETHANE THERMO PLASTIC RUBBER PAGE 1 & 1 PHENOLIC PAGE 1 POLYOLEFIN PAGE 16 PAGE 18
60 continued Wheel Material Bearing Part Number Rigid Part Number Approx. 0 1 1 1 8 1 8 ACETAL 6 1/-0-PDN 6 1/-0-PRDN BALL 6 1/-0-XDN 6 1/-0-XRDN ACETAL 6 1/-0-PKN 6 1/-0-PRKN BALL 6 1/-0-XKN 6 1/-0-XRKN 00 BALL 6 1/-0-XAE 6 1/-0-XRAE DELRIN 6 1/-0-DAE 6 1/-0-DRAE PLAIN 6 1/-0-BCI 6 1/-0-BRCI -1/ ACETAL 6 1/-0-PH 6 1/-0-PRH BALL 6 1/-0-XH 6 1/-0-XRH POLYURETHANE / HUB BALL 6 1/-0-XADI-M-CI 6 1/-0-XRADI-M-CI -1/ 15 EXTRA SOFT THERMO-PLASTIC RUBBER 00 THERMO-PLASTIC RUBBER 5 POLYOLEFIN 00 BALL 6 1/-0-XPD-M-PO-55 6 1/-0-XRPD-M-PO-55 DELRIN 6 1/-0-DPD-M-PO-55 6 1/-0-DRPD-M-PO-55 BALL 6 1/-0-XPD-M-PO 6 1/-0-XRPD-M-PO DELRIN 6 1/-0-DPD-M-PO 6 1/-0-DRPD-M-PO BALL 6 1/-0-XPO 6 1/-0-XRPO PLAIN 6 1/-0-BPO 6 1/-0-BRPO BALL 6 1/-0-XADI-M-PO 6 1/-0-XRADI-M-PO DELRIN 6 1/-0-DADI-M-PO 6 1/-0-DRADI-M-PO ACETAL 6-0-PEZN-RD 6-0-PREZN BALL 6-0-XEZN-RD 6-0-XREZN-RD ACETAL 6-0-PDN 6-0-PRDN BALL 6-0-XDN 6-0-XRDN ACETAL 6-0-PKN 6-0-PRKN BALL 6-0-XKN 6-0-XRKN BALL 6-0-XAE 6-0-XRAE DELRIN 6-0-DAE 6-0-DRAE BALL 6-0-XCI 6-0-XRCI PLAIN 6-0-BCI 6-0-BRCI ACETAL 6-0-PH 6-0-PRH BALL 6-0-XH 6-0-XRH PHENOLIC ROLLER 6-0-TPR 6-0-TRPR POLYURETHANE / HUB BALL 6-0-XADI-M-CI 6-0-XRADI-M-CI PLAIN 6-0-BADI-M-CI 6-0-BRADI-M-CI EXTRA SOFT BALL 6-0-XPD-M-PO-55 6-0-XRDP-M-PO-55 150 THERMO-PLASTIC RUBBER DELRIN 6-0-DPD-M-PO-55 6-0-DRPD-M-PO-55 5 THERMO-PLASTIC RUBBER BALL 6-0-XPD-M-PO 6-0-XRPD-M-PO DELRIN 6-0-DPD-M-PO 6-0-DRPD-M-PO 0 POLYOLEFIN PLAIN 6-0-BPO 6-0-BRPO POLYOLEFIN BALL 6-0-XPO 6-0-XRPO 00 BALL 6-0-XADI-M-PO 6-0-XRADI-M-PO DELRIN 6-0-DADI-M-PO 6-0-DRADI-M-PO 00 STEEL DISC NEOPRENE BALL 6 1/-0-XDN-T-SD 6 1/-0-XRDN-T-SD 50 STEEL DISC HI-CAP NEOPRENE BALL 6 1/-0-XKN-T-SD 6 1/-0-XRKN-T-SD STEEL DISC POLYURETHANE BALL 6 1/-0-XADI-T-SD 6 1/-0-XRADI-T-SD ACETAL 6 1/-0-PDN 6 1/-0-PRDN BALL 6 1/-0-XDN 6 1/-0-XRDN ACETAL 6 1/-0-PKN 6 1/-0-PRKN BALL 6 1/-0-XKN 6 1/-0-XRKN BALL 6 1/-0-XAE 6 1/-0-XRAE DELRIN 6 1/-0-DAE 6 1/-0-DRAE -1/ PLAIN 6 1/-0-BCI 6 1/-0-BRCI ACETAL 6 1/-0-PH 6 1/-0-PRH BALL 6 1/-0-XH 6 1/-0-XRH PHENOLIC ROLLER 6 1/-0-TPR 6 1/-0-TRPR POLYURETHANE / HUB BALL 6 1/-0-XADI-M-CI 6 1/-0-XRADI-M-CI -1/ PLAIN 6 1/-0-BADI-M-CI 6 1/-0-BRADI-M-CI -/ -/8-5/16 -/ -/
60 Series Wheel Material Bearing Part Number Rigid Part Number Approx. 1 1 8 5 1 8 1 8 BALL 6 1/-0-XPD-M-PO-55 6 1/-0-XRPD-M-PO-55 160 THERMO-PLASTIC RUBBER DELRIN 6 1/-0-DPD-M-PO-55 6 1/-0-DRPD-M-PO-55 BALL 6 1/-0-XPD-M-PO 6 1/-0-XRPD-M-PO 0 THERMO-PLASTIC RUBBER DELRIN 6 1/-0-DPD-M-PO 6 1/-0-DRPD-M-PO -1/ 65 POLYOLEFIN PLAIN 6 1/-0-BPO 6 1/-0-BRPO 00 POLYOLEFIN BALL 6 1/-0-XPO 6 1/-0-XRPO 60 BALL 6 1/-0-XADI-M-PO 6 1/-0-XRADI-M-PO DELRIN 6 1/-0-DADI-M-PO 6 1/-0-DRADI-M-PO -1/ 00 STEEL DISC NEOPRENE BALL 6-0-XDN-T-SD 6-0-XRDN-T-SD 50 STEEL DISC HI-CAP NEOPRENE BALL 6-0-XKN-T-SD 6-0-XRKN-T-SD -1/ STEEL DISC POLYURETHANE BALL 6-0-XADI-T-SD 6-0-XRADI-T-SD ACETAL 6-0-PEZN-RD 6-0-PREZN-RD BALL 6-0-XEZN-RD 6-0-XREZN-RD 00 ACETAL 6-0-PDN 6-0-PRDN BALL 6-0-XDN 6-0-XRDN ROUND DONUT / NEOPRENE ACETAL 6-0-PDN-RD 6-0-PRDN-RD BALL 6-0-XDN-RD 6-0-XRDN-RD -1/ ACETAL 6-0-PKN 6-0-PRKN BALL 6-0-XKN 6-0-XRKN BALL 6-0-XAE 6-0-XRAE DELRIN 6-0-DAE 6-0-DRAE BALL 6-0-XCI 6-0-XRCI PLAIN 6-0-BCI 6-0-BRCI -1/ ACETAL 6-0-PH 6-0-PRH BALL 6-0-XH 6-0-XRH -1/ PHENOLIC ROLLER 6-0-TPR 6-0-TRPR POLYURETHANE/ HUB BALL 6-0-XADI-M-CI 6-0-XRADI-M-CI BALL 6-0-XPD-M-PO-55 6-0-XRPD-M-PO-55 170 THERMO-PLASTIC RUBBER DELRIN 6-0-DPD-M-PO-55 6-0-DRPD-M-PO-55-1/ 50 THERMO-PLASTIC RUBBER BALL 6-0-XPD-M-PO 6-0-XRPD-M-PO DELRIN 6-0-DPD-M-PO 6-0-DRPD-M-PO 75 POLYOLEFIN PLAIN 6-0-BPO 6-0-BRPO POLYOLEFIN BALL 6-0-XPO 6-0-XRPO -1/ BALL 6-0-XADI-M-PO 6-0-XRADI-M-PO DELRIN 6-0-DADI-M-PO 6-0-DRADI-M-PO -1/ 00 STEEL DISC NEOPRENE BALL 65-0-XDN-T-SD 65-0-XRDN-T-SD 50 STEEL DISC HI-CAP NEOPRENE BALL 65-0-XKN-T-SD 65-0-XRKN-T-SD -1/ STEEL DISC POLYURETHANE BALL 65-0-XADI-T-SD 65-0-XRADI-T-SD ACETAL 65-0-PEZN-RD 65-0-PREZN-RD BALL 65-0-XEZN-RD 65-0-XREZN-RD ACETAL 65-0-PDN 65-0-PRDN BALL 65-0-XDN 65-0-XRDN ACETAL 65-0-PKN 65-0-PRKN BALL 65-0-XKN 65-0-XRKN BALL 65-0-XAE 65-0-XRAE DELRIN 65-0-DAE 65-0-DRAE -1/ BALL 65-0-XCI 65-0-XRCI PLAIN 65-0-BCI 65-0-BRCI ACETAL 65-0-PH 65-0-PRH BALL 65-0-XH 65-0-XRH PHENOLIC ROLLER 65-0-TPR 65-0-TRPR POLYURETHANE/ HUB BALL 65-0-XADI-M-CI 65-0-XRADI-M-CI BALL 65-0-XPD-M-PO-55 65-0-XRPD-M-PO-55 180 THERMO-PLASTIC RUBBER DELRIN 65-0-DPD-M-PO-55 65-0-DRPD-M-PO-55 BALL 65-0-XPD-M-PO 65-0-XRPD-M-PO 75 THERMO-PLASTIC RUBBER DELRIN 65-0-DPD-M-PO 65-0-DRPD-M-PO POLYOLEFIN BALL 65-0-XPO 65-0-XRPO BALL 65-0-XADI-M-PO 65-0-XRADI-M-PO -1/ -/ 5-1/ -1/ 6-1/ -1/ DELRIN 65-0-DADI-M-PO 65-0-DRADI-M-PO 0 POLYOLEFIN PLAIN 65-0-BPO 65-0-BRPO 5 1 1 1 00 EXTRA SOFT NEOPRENE BALL 65 1/-0-XEZN-RD 65 1/-0-XREZN-RD -1/ 6-7/8 -/ 1
60 Series Wheel Material Bearing Part Number Rigid Part Number Approx. 6 1 8 00 STEEL DISC NEOPRENE BALL 66-0-XDN-T-SD 66-0-XRDN-T-SD 50 STEEL DISC HI-CAP NEOPRENE BALL 66-0-XKN-T-SD 66-0-XRKN-T-SD -1/ STEEL DISC POLYURETHANE BALL 66-0-XADI-T-SD 66-0-XRADI-T-SD EXTRA SOFT NEOPRENE ACETAL 66-0-PEZN-RD 66-0-PREZN-RD -/ 00 ACETAL 66-0-PDN 66-0-PRDN BALL 66-0-XDN 66-0-XRDN 75 HI-CAP NEOPRENE ACETAL 66-0-PKN 66-0-PRKN BALL 66-0-XKN 66-0-XRKN BALL 66-0-XCI 66-0-XRCI PLAIN 66-0-BCI 66-0-BRCI ACETAL 66-0-PH 66-0-PRH BALL 66-0-XH 66-0-XRH POLYURETHANE / HUB BALL 66-0-XADI-M-CI 66-0-XRADI-M-CI -1/ 190 THERMO-PLASTIC RUBBER 00 THERMO-PLASTIC RUBBER POLYOLEFIN BALL 66-0-XPD-M-PO-55 66-0-XRPD-M-PO-55 DELRIN 66-0-DPD-M-PO-55 66-0-DRPD-M-PO-55 BALL 66-0-XPD-M-PO 66-0-XRPD-M-PO DELRIN 66-0-DPD-M-PO 66-0-DRPD-M-PO BALL 66-0-XPO 66-0-XRPO PLAIN 66-0-BPO 66-0-BRPO BALL 66-0-XADI-M-PO 66-0-XRADI-M-PO DELRIN 66-0-DADI-M-PO 66-0-DRADI-M-PO 8 1 9 16 00 EXTRA SOFT NEOPRENE BALL 68-0-XEZN-RD 68-0-XREZN-RD 5-1/ 9-7/16 6-/8 7-/8 5-1/ 60 Stainless Steel Designed to provide the ultimate CORROSION PROTECTION These casters are ideally suited for acetic, nitric and citric acid environments in addition to being will suited for organic and inorganic chemicals, dye stuffs, crude and refined oil environments. Widely accepted in the following industries: DAIRY FOOD PROCESSING HOSPITALS & MEDICAL BEVERAGE PHARMACEUTICALS ANIMAL CAGES Made with non-magnetic, 0/0 stainless steel.