ILD plus 3,,, Column gate PARTS BREAK DOWN Interlift Inc. a member of MBB Palfinger TEL. ()-77- FAX. (2)--31 72 Whitehead Road, Trenton, NJ 01 TEL.(0)-7-200 FAX.(0)-7-201 DATE: /2/20 REVISION: 1.
ILD plus INDEX ILD plus - Column gate Important gate information: On the column of the driver side No. Description Page 1 LIFTING GEAR 3 2 STEEL PLATFORM with aluminum ramp 3 STEEL PLATFORM with fixed ramp ALUMINUM PLATFORM with aluminum ramp ALUMINUM PLATFORM with fixed ramp 7 CONTROL SYSTEM 7 CYLINDER CYLINDER COMPONENTS - open close cylinder 10 POWER PACK - overview 10 POWER PACK - SINGLE MOTOR POWER PACK - DOUBLE MOTOR HYDRAULIC PIPE 1 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 2 / 1 Tel: () 77- Fax: (2) -31
ILD plus LIFTING GEAR 1 1 1 17 1 2 1 3 21 7 23 20 1 1 Lifting gear on request 2 Column - curb side PD-02-0-100 3 Column - driver side PD-02-0-200 Runner - curb side PD-03-0-200 Runner - driver side PD-03-0-100 Traverse 102" wide PD-0-0-100 Traverse " wide PD-0-0-200 7 Light cover box PD-02-0-10 Bumper pad PD-000221 Bumper PD-02-0-103 Lower slide pad with hardware 0--2 Nut plate PD--0-101 Slide latch with bolt PD-02-0-303A 1 Top cover with hardware PD--0-301A 1 Upper slide pad with hardware PD-00021 1 Cylinder top bracket with hardware PD--0-200A 17 Pin bearing P-201 0 1 Lock nut P-72 0 1 Power pack box lid PD-00000 20 Power pack box P-2017 21 Travel latch - curb side P-201 22 Travel latch kit - curb side - incl. slide latch and bolt PD-02-0-302A 23 Travel latch - driver side PD-02-0-301 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 3 / 1 Tel: () 77- Fax: (2) -31
ILD plus PLATFORM Steel platform with aluminum ramp 27 1 1 3 2 1 20 7 1 1 1 10 1 17 10 27 7 20 1 Platform - specific length and width size on request 2 Platform main section - specific length and width size on request 3 Platform tip section - specific length and width size on request Aluminum ramp plate - specific length size on request Chain incl. U-bolt and shackle PD-000101A U-bolt, incl Nuts PD--0-101A 7 Pin platform, column P-201 0 Pin, Hinge Platform (new style) - one side --1A Bushing main section platform P-10 333 10 Bushing main section platform P-100 002 Shackle PD-13 102 Chain arm - driver side (72" and ") Chain arm - curb side (72" and ") PD-20-0-0 PD-20-0-0 Chain arm - driver side (0" and 1") Chain arm - curb side (0" and 1") PD-20-0-10 PD-20-0-10 1 U-bent link PD-20-0- 1 Ramp hinge - curb side with hardware PD-23-0-100A 1 Ramp hinge - driver side with hardware PD-23-0-200A 17 Ramp retainer plate, incl. bolt PD-23-0-A 1 Grease Zerk P-0 337 1 Rubber snubber pad P-710 23A 20 Platform shim P-1 7 27 Sleeve (both sides) PD-11 7 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 / 1 Tel: () 77- Fax: (2) -31
ILD plus PLATFORM Steel platform with fixed ramp 1 3 2 1 7 1 1 1 10 10 7 1 27 20 21 1 Platform - specific length and width size on request 2 Platform main section - specific length and width size on request 3 Platform tip section - specific length and width size on request Chain incl. U-bolt and shackle PD-00 0101A U- bolt with nuts PD--0-101A 7 Pin platform, column P-201 0 Pin, Hinge Platform (new style) - one side --1A Bushing main section platform P-10 333 10 Bushing main section platform P-100 002 Shackle PD-13 102 Chain arm - driver side (72" and ") Chain arm - curb side (72" and ") PD-20-0-0 PD-20-0-0 Chain arm - driver side (0" and 1") Chain arm - curb side (0" and 1") PD-20-0-10 PD-20-0-10 1 U-bent link PD-20-0- 1 Grease Zerk P-0 337 1 Washer P-1 7 20 Cart Stop kit - steet side 20-0-00 21 Cart stop kit - curb side PD-20-0-10 27 Sleeve (both sides) PD-11 7 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 / 1 Tel: () 77- Fax: (2) -31
ILD plus PLATFORM Aluminum platform with alu ramp 27 1 1 2 3 2 1 2 7 1 1 23 1 10 7 2 22 30 23 20 10 Planks just one length 17 2 21 1 21 2 2 2 2 31 1 Platform - specific length and width size on request 2 Platform main section - specific length and width size on request 3 Platform tip section - specific length and width size on request Aluminum ramp plate - specific length size on request Chain incl. U-bolt and shackle PD-00 0101A U- bolt with nuts PD--0-101A 7 Pin platform, column P-201 0 Pin, Hinge Platform (new style) - one side --1A Bushing main section platform P-10 333 10 Bushing main section platform P-100 002 PD-000221 PD-13 102 Chain arm - driver side (72" and ") Chain arm - curb side (72" and ") PD-20-0-0 PD-20-0-0 Chain arm - driver side (0" and 1") Chain arm - curb side (0" and 1") PD-20-0-10 PD-20-0-10 1 U-bent link PD-20-0- 1 Ramp hinge - curb side with hardware PD-23-0-100A 1 Ramp hinge - driver side with hardware PD-23-0-200A 17 Ramp retainer plate with hardware PD-23-0-A 1 Grease zerk P-0 337 1 Bumper P-710 23A 20 Side profile - tip section, driver side on request 21 Side profile - tip section, curb side on request 22 Sidebar on request 23 Sidebar on request Extrusion ", Center 20-700-102-2 Plank base - " - cut to required length 20-700-101-2 Plank hinge - " - cut to required length 20-700-103-27 Sleeve (both sides) PD-11 7 2 Platform shim P-37 2 Bolt M10-1. x 0mm 103010 30 Bolt M10-1. x 0mm, 10301 31 Bolt 7/1-1 x 2-1/ 1030 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 / 1 Tel: () 77- Fax: (2) -31
ILD plus PLATFORM Aluminum platform 1 3 2 2 7 1 1 1 10 27 22 23 20 10 21 30 31 7 2 Planks just one length 2 2 2 1 Platform - specific length and width size on request 2 Platform main section - specific length and width size on request 3 Platform tip section - specific length and width size on request Chain PD-00 0101A U- bolt PD--0-101A 7 Pin platform, column P-201 0 Pin, Hinge Platform (new style) - one side --1A Bushing main section platform P-10 333 10 Bushing main section platform P-100 002 Shackle PD-13 102 Chain arm - driver side (72" and ") Chain arm - curb side (72" and ") PD-20-0-0 PD-20-0-0 Chain arm - driver side (0" and 1") Chain arm - curb side (0" and 1") PD-20-0-10 PD-20-0-10 1 U-bent link 20-0- 1 Grease zerk P-0 337 20 Side profile - tip section, driver side on request 21 Side profile - tip section, curb side on request 22 Side profile - main section, driver side on request 23 Side profile - main section, curb side on request Plank center - " - cut to required length 20-700-102-2 Plank base - " - cut to required length 20-700-101-2 Extrusion " PF Hinge 20-700-103-27 Sleeve, 3'' lenght, PD-11 7 2 Washer P-1 7 2 Plank tip - with cartstops on request 30 Cart stop - driver side on request 31 Cart stop - curb side on request 2 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 7 / 1 Tel: () 77- Fax: (2) -31
START ILD plus CONTROL SYSTEM 1 2 3 VOLTS STOP 7 20 21 1 1 1 17 1 1 No. Description Part No. 1 PC-board K plus P-200 7 2 Jumper P-202 002 3 Fuse holder P-201 02 Voltage gauge PD-70-0-201 Control switch P-202 03 Toggle switch P-200 7 Hand control with coil P-03 30 WSP Wire harness for circuit board power and power pack P-202 000 Cable for solenoid valve P-202 001 Circuit breaker manual resetting 10A 3-1010 Circuit breaker automatic resetting 10A 3-1010A Connection cable for motors P-202 00 1 Holster for hand control PD-000221 Battery cable - " PD-17 317 Battery cable - " PD-17 31 1 Battery cable - 3" PD-17 31 Battery cable - 0" PD-17 31 Battery cable - 0' PD-17 31 1 Master disconnect switch PD-17 31 17 Battery hold down kit incl. bolts, washer and nuts PD-0-0-200A 1 Hex head bolt 3/"-1 x " PD-103 02 1 Light with grommet 3-3- Light kit, lights incl. harness and grommet PD-172 11 20 Radio control transmitter, way P-2017 21 Radio control receiver, way P-2017 22 Radio control kit - transmitter and receiver P-201 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 / 1 Tel: () 77- Fax: (2) -31
ILD plus CYLINDER 10 7 7 10 Driver side Curb side 1 2 3 Measure No. Description ILD plus 3, ILD plus, Outer tube diameter- curb side cylinder mm (2 ½'') 73 mm (2 ⅞'') Outer tube diameter- driver side cylinder 73 mm (2 ⅞'') 0 mm (3 ⅛'') 1 Curb side cylinder P-202 07 P-201 2 Driver side cylinder P-201 P-201 3 Open- Close cylinder P-202 21 P-202 21 Pin upper open-close cylinder P- 22 P- 22 Pin lower open-close cylinder P-202 0 P-202 0 Pin lower lift cylinder P-3 277 P-3 277 7 Pin upper lift cylinder P-200 33 P-200 33 Cylinder top bracket with hardware PD--0-200A PD--0-200A Pin bearing P-201 0 P-201 0 10 Lock nut P-72 0 P-72 0 Bolt, pin lock P-200 2 P-200 2 Adjusting head P-201 1 P-2011 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 / 1 Tel: () 77- Fax: (2) -31
ILD plus CYLINDER COMPONENTS Open close cylinder 2 7 3 1 Open close cylinder incl. adjusting head P-202 21 2 Piston rod P-201 1 3 Guide bushing P-200 310 Restrictor P-202 00 Rebuild kit P-10 73 0 fitting P-202 0332 7 Adjusting head P-2011 Nut P-727 17 Bushing P-10 33 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 10 / 1 Tel: () 77- Fax: (2) -31
ILD plus POWER PACK Overview Single motor - page Dual motor - page 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 / 1 Tel: () 77- Fax: (2) -31
ILD plus POWER PACK Single Motor Power Pack 3 23 1 1 20 21 22 1 10 17 7 2 2 27 1 1 Power Pack- single motor P-20102A 2 Second motor - just dual power pack N/A 3 Power pack box PD-000000 Power pack box lid PD-00000 Motor P-2020 Carbon brushes kit P-110330 7 Motor solenoid P-10303 Terminal block P-3 Seal ring P-20073 10 Coupler P-202017 Pump incl. coupler, pipe, filter P-20201 Two way release valve P-2022A Single locking release valve P-7223 1 PD-000221 P-202 1 Pressure control valve P-202 17 Return pipe P-202 1 Pilot operated check valve P-202 1 Pump filter P-20 20 Clamp for oil reservoir P-20073 21 Breather cap P-2021 22 Oil reservoir P-2023 23 Plug P-2027 Adaptor (male ¼ BSPP; male ¼ JIC) PD-317 2 Fitting (male ¼ BSPP; female ¼ JIC) PD-31 2 Fitting (male ¼ BSPP; female ⅜ JIC) PD-31 27 Adaptor (male ¼ BSPP; male ⅜ JIC) PD-310 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 / 1 Tel: () 77- Fax: (2) -31
ILD plus POWER PACK Dual Power Pack 2 2 30 31 10 32 3 37 3 7 0 33 2 3 1 Parts for this power pack see page 3 3 1 Dual power pack - incl. hoses and fittings P-201 0A 2 Pump and motor secondary P-201 0 3 Power pack box PD-000000 Power pack box lid PD-00000 Motor P-202 0 Carbon brushes kit P-11 0330 7 Motor solenoid P-10 303 Terminal block P-3 Seal ring P-200 73 10 Coupler P-202 12 PD-000221 P-202 01 2 Port plug P-202 2 Plug P-202 7 30 Plug P-202 10 31 Check valve P-202 11 32 Plastic plug P-02 1000 33 Rubber plate P-202 13 3 Pressure sensing valve P-202 3 Adaptor (male ⅜ JIC; male ⅜ BSPP) PD-3 37 Hose - second pump to oil reservoir PD-3 2 3 0 fitting (male ⅜ JIC; female ⅜ JIC) PD-3 1 3 Fitting - filter included PD-3 2 0 Hose - hydraulic PD-3 21 1 Adaptor (male ¼ BSPP; male ⅜ JIC) PD-3 10 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 / 1 Tel: () 77- Fax: (2) -31
ILD plus HYDRAULIC PIPE 10 3 Driver side cylinder Curb side cylinder Open close cylinder 2 1 10 1 1 Hydraulic hose (3/" x 10") - curb side cylinder; connection hose PD-3 22 2 Hydraulic hose (3/" x 22") - curb side cylinder; driver side cylinder PD-3 3 Hydraulic hose (3/" x 20") - driver side cylinder; connection hose PD-3 1 Hydraulic hose (1/" x ") - open-close-cylinder; connection hose PD-3 Connection hydraulic hose (1/" x ") - to open-close- cylinder PD-3 23 Connection hydraulic hose (3/" x 10") - to lift cylinders PD-3 22 7 PD-000221 PD-3 21 Bulkhead fitting PD-3 0 fitting (male ⅜ JIC; female ⅜ JIC) PD-3 1 10 Adaptor (male ¼ BSPP; male ⅜ JIC) PD-3 10 Fitting (female ¼ JIC; female ¼ JIC) PD-3 20 Adaptor (male ¼ BSPP; male ¼ JIC) PD-3 17 Fitting (male ¼ BSPP; female ¼ JIC) PD-3 1 1 0 fitting (male ¼ JIC; female ¼ JIC) PD-3 1 1 Fitting (male ¼ BSPP; female ⅜ JIC) PD-3 1 72 Whitehead Road, Trenton, NJ 01 Tel: (0) 7-200 Fax: (0) 7-201 1 / 1 Tel: () 77- Fax: (2) -31