Tungsten Carbide Rotary Burrs www.procut.ie
Introduction Procut is an internationally renowned brand of high quality carbide burrs, and forms a key part of ATA Group, a privately owned organisation with over 50 years experience in the supply of metal working solutions to all major industrial sectors. We are committed to providing our customers with high performance products that maximise productivity and reduce costs. Our headquarters and global production centre based in Cavan, Ireland, is accredited to ISO9001:2008 and equipped with the latest CNC technology delivering product of unrivalled quality and consistency. Contents Cuts & Speed Guide 4 5 Standard Burr Range 6 19 A Shape 6 B Shape 7 C Shape 8 D Shape 9 E Shape 10 F Shape 11
G Shape 12 H Shape 13 J Shape 14 K Shape 15 L Shape 16 M Shape 17 N Shape 18 RIM Shape 19 Miniature Range 20 22 Micro Range 23 Long Shank Range 24 26 Coated Range 27 29 Router Range 30 Power Cut Range 31 33 Burr Sets 34 Recommendations For Use 35 www.procut.ie 3
Cut Selection Guide Standard Cut s Cut 6 Double cut for general purpose use. Improves control and reduces chips Cut 2 Standard cut for general applications Cut 3 Fast Mill cut for rapid stock removal of softer nonferrous materials including plastics Special Cut s Cut 1 Coarse cut for metal removal and finishing applications on nonferrous metal alloys Cut 4 Fine cut for improved finish on all ferrous metals Cut 5 Foundry cut for maximum stock removal, rough edges and foundry applications Cut 8 Diamond cut for hardest materials and best finishes Cut 9 Chipbreaker cut for fast stock removal. Improves control and surface finish Cut 10 Fast Mill cut with chipbreaker for rapid stock removal Cut Selection Guide Standard Cut s Special Cut s Material Cut 6 Cut 2 Cut 3 Cut 1 Cut 4 Cut 5 Cut 8 Cut 9 Cut 10 Aluminium, Plastic Brass, Copper, Cast Iron, Bronze Unhardened Steel Hardened Steels, Stainless Steels, Nimonic Alloys, Titanium Recommended Highly Recommended
Speed Guide Recommended Operating Speeds All Speeds in the table below quoted x 1,000 rpm Aluminium, Plastic Brass, Copper Cast Iron, Bronze Unhardened Steel Hardened Steel, Stainless Steel, Nimonic Alloys Burr Head Diameter Maximum Operating Speeds Speed Range Recomm. Start Point Speed Range Recomm. Start Point Speed Range Recomm. Start Point Speed Range Recomm. Start Point (1/8 ) 100 60 80 65 45 80 65 60 80 80 60 80 80 (1/4 ) 65 15 60 40 22 60 45 45 60 50 30 45 40 10mm (3/8 ) 55 10 50 25 15 40 30 30 40 30 19 30 25 12mm (1/2 ) 35 7 30 20 11 30 25 22 30 25 15 22 20 1 (5/8 ) 25 6 20 15 9 20 20 18 20 20 12 18 15 20mm (3/4 ) 20 5 17 10 8 17 12 15 17 15 10 15 10 25mm (1 ) 15 4 13 8 6 13 10 10 13 10 7 11 8 Recommended Speeds are based on standard length of 45mm / (13/4") max overhang of 10mm (3/8") Maximum recommended operating speeds for extended length s is 15,000rpm www.procut.ie 5
procut part of the ATA group Cylinder without Endcut Shape: A, ZYA, SA l1 l2 d2 Dimensions All in mm 1.5 2.0 2.5 12.0 4.7 3 3 3 3 3 37.0 4 A31.5062 A302112 A32.5122 A303142 A305122 A306052 A306122 A31.5066 A302116 A32.5126 A303146 A305126 A306056 A306126 A303143 A306123 Dimensions All in mm 1 1 1 13.5 59.0 A603122 A604132 A605162 A606182 A606252 A608202 A610142 A610202 A610252 A611252 A612202 A612252 A615252 A620252 A625252 A603126 A604136 A605166 A606186 A606256 A608206 A610146 A610206 A610256 A611256 A612206 A612256 A615256 A620256 A625256 A606183 A608203 A610203 A612253 A615253 A620253 A625253 Dimensions All in mm 1 A812252 A815252 A820252 A825252 A812256 A815256 A820256 A825256 A812253 A815253 A820253 A825253
Tungsten Carbide Rotary Burrs Cylinder with Endcut Shape: B, ZYAS, SB l1 l2 d2 Dimensions All in mm 1.5 2.0 2.5 12.0 4.7 3 3 3 3 3 37.0 4 B31.5062 B302112 B32.5122 B303142 B305122 B306052 B306122 B31.5066 B302116 B32.5126 B303146 B305126 B306056 B306126 B303143 B306123 Dimensions All in mm 1 1 1 13.5 59.0 B603122 B604132 B605162 B606182 B606252 B608202 B610142 B610202 B610252 B611252 B612202 B612252 B615252 B620252 B625252 B603126 B604136 B605166 B606186 B606256 B608206 B610146 B610206 B610256 B611256 B612206 B612256 B615256 B620256 B625256 B606183 B608203 B610203 B612253 B615253 B620253 B625253 Dimensions All in mm 1 B812252 B815252 B820252 B825252 B812256 B815256 B820256 B825256 B812253 B815253 B820253 B825253 www.procut.ie 7
procut part of the ATA group Ball Nosed Cylinder Shape: C, WRC, SC l1 l2 d2 Dimensions All in mm 2.0 2.5 3 3 3 3 4 C302112 C32.5112 C303122 C305122 C306122 C302116 C32.5116 C303126 C305126 C306126 C303123 C306123 Dimensions All in mm 12.0 1 1 1 10.0 5 C603122 C604132 C605162 C606182 C606252 C608202 C610202 C610252 C611252 C612102 C612202 C612252 C615252 C620252 C625252 C603126 C604136 C605166 C606186 C606256 C608206 C610206 C610256 C611256 C612106 C612206 C612256 C615256 C620256 C625256 C606183 C608203 C610203 C612203 C612253 C615253 C620253 Dimensions All in mm 1 C812252 C815252 C820252 C825252 C812256 C815256 C820256 C825256 C812253 C815253 C820253
Tungsten Carbide Rotary Burrs Ball Shape: D, KUD, SD l1 l2 d2 Dimensions All in mm 2.0 2.5 1.8 2.3 2.5 3.4 4.7 3 3 3 3 3 3 D302022 D32.52.52 D303032 D304042 D305052 D306062 D302026 D32.52.56 D303036 D304046 D305056 D306066 D303033 D304043 D306063 Dimensions All in mm 1 2.5 4.7 9.5 16.5 22.0 52.0 5 5 5 59.0 62.0 67.0 D603032 D604042 D605052 D606062 D608082 D610102 D611112 D612122 D615152 D620202 D625252 D603036 D604046 D605056 D606066 D608086 D610106 D611116 D612126 D615156 D620206 D625256 D606063 D608083 D610103 D612123 D615153 D620203 D625253 Dimensions All in mm 1 16.5 22.0 5 59.0 62.0 67.0 D812122 D815152 D820202 D825252 D812126 D815156 D820206 D825256 D812123 D815153 D820203 D825253 www.procut.ie 9
procut part of the ATA group Oval Shape: E, TRE, SE l1 l2 d2 Dimensions All in mm 9.5 3 3 42.0 E303062 E305082 E306102 E303066 E305086 E306106 E303063 E306103 Dimensions All in mm 1 10.0 1 1 22.0 60.0 60.0 67.0 E606102 E608152 E610152 E612202 E615252 E620252 E606106 E608156 E610156 E612206 E615256 E620256 E606103 E608153 E610153 E612203 E615253 E620253 Dimensions All in mm 1 22.0 67.0 E812202 E815252 E820252 E812206 E815256 E820256 E812203 E815253 E820253
Tungsten Carbide Rotary Burrs Ball Nosed Tree Shape: F, RBF, SF l1 l2 d2 Dimensions All in mm 3 3 3 3 4 F303062 F303082 F303122 F305122 F306122 F303066 F303086 F303126 F305126 F306126 F303123 F306123 Dimensions All in mm 1 1 1 20.0 30.0 32.0 3 6 7 77.0 8 F606182 F608202 F610202 F611252 F612202 F612252 F615252 F615302 F620252 F620322 F620382 F606186 F608206 F610206 F611256 F612206 F612256 F615256 F615306 F620256 F620326 F620386 F606183 F608203 F610203 F612253 F615253 F620253 F620323 F620383 Dimensions All in mm 1 32.0 3 77.0 8 F812252 F815252 F820252 F820322 F820382 F812256 F815256 F820256 F820326 F820386 F812253 F815253 F820253 F820323 F820383 www.procut.ie 11
procut part of the ATA group Pointed Tree Shape: G, SPG, SG l1 l2 d2 Dimensions All in mm 10.0 3 3 3 3 4 G303062 G303102 G303122 G305122 G306122 G303066 G303106 G303126 G305126 G306126 G303123 G306123 Dimensions All in mm 1 1 1 30.0 30.0 3 7 7 8 G606182 G608202 G610202 G612202 G612252 G612302 G615252 G615302 G620252 G620382 G606186 G608206 G610206 G612206 G612256 G612306 G615256 G615306 G620256 G620386 G606183 G608203 G610203 G612253 G615253 Dimensions All in mm 1 1 30.0 30.0 3 7 7 8 G812252 G812302 G815252 G815302 G820252 G820382 G812256 G812306 G815256 G815306 G820256 G820386 G812253 G815253
Tungsten Carbide Rotary Burrs Flame Shape: H, SH l1 l2 d2 Dimensions All in mm 9.5 10.0 3 3 4 H303062 H305102 H306122 H303066 H305106 H306126 Dimensions All in mm 1 32.0 3 41.0 6 77.0 81.0 8 H606142 H608202 H610202 H612322 H615352 H620422 H606146 H608206 H610206 H612326 H615356 H620426 H608203 H610203 H612323 H615353 Dimensions All in mm 1 32.0 3 41.0 77.0 81.0 8 H812322 H815352 H820422 H812326 H815356 H820426 www.procut.ie 13
procut part of the ATA group 60º Countersink Shape: J, KSJ, SJ l1 l2 d2 Dimensions All in mm 2.5 3 J303032 J303036 Dimensions All in mm 1 14.5 17.5 24.5 5 59.0 6 6 J606062 J610082 J612102 J615122 J620182 J625202 J606066 J610086 J612106 J615126 J620186 J625206 Dimensions All in mm 1 14.5 17.5 24.5 59.0 6 6 J812102 J815122 J820182 J825202 J812106 J815126 J820186 J825206
Tungsten Carbide Rotary Burrs 90º Countersink Shape: K, KSK, SK l1 l2 d2 Dimensions All in mm 1.5 3 K303032 K303036 Dimensions All in mm 1 4.7 9.5 5 5 57.0 59.0 61.0 K606032 K610042 K612062 K615082 K620122 K625122 K606036 K610046 K612066 K615086 K620126 K625126 Dimensions All in mm 1 9.5 5 57.0 59.0 61.0 K812062 K815082 K820122 K825122 K812066 K815086 K820126 K825126 www.procut.ie 15
procut part of the ATA group Ball Nose Cone Shape: L, KEL, SL l1 l2 d2 Dimensions All in mm Angle 10.0 15.8 3 3 3 4 10 º 8 º 22 º L303102 L303122 L305122 L306122 L303106 L303126 L305126 L306126 L303123 L306123 Dimensions All in mm Angle 10.0 12.0 1 1 25.4 20.0 30.0 32.0 3 41.0 6 7 77.0 7 8 L606182 L608222 L610202 L610262 L612252 L612282 L615332 L620382 L606186 L608226 L610206 L610266 L612256 L612286 L615336 L620386 L606183 L608223 L610203 L610263 L612283 L615333 Dimensions All in mm Angle 1 32.0 3 41.0 77.0 7 8 L812282 L815332 L820382 L812286 L815336 L820386 L812283 L815333
Tungsten Carbide Rotary Burrs Cone Shape: M, SKM, SM l1 l2 d2 Dimensions All in mm Angle 1 3 3 3 49.0 18 º 10 º 22 º M303082 M303112 M303152 M306122 M303086 M303116 M303156 M306126 M303113 M306123 Dimensions All in mm Angle 1 20.0 1 1 22.0 71.0 71.0 20 º 10 º 22 º 28 º 28 º 31 º M606122 M606202 M606252 M608182 M610202 M612222 M615252 M606126 M606206 M606256 M608186 M610206 M612226 M615256 M606203 M610203 M612223 Dimensions All in mm Angle 1 22.0 71.0 71.0 28 º 31 º M812222 M815252 M812226 M815256 www.procut.ie 17
procut part of the ATA group Inverted Cone Shape: N, WKN, SN l1 l2 d2 Dimensions All in mm Angle 6.4 3 3 39.0 39.0 10 º 10 º 12 º 12 º N303042 N303042E* N306062 N306062E* N303046 N303046E* N306066 N306066E* * Inverted Cone with Endcut Dimensions All in mm Angle 1 9.5 1 5 5 61.0 10 º 16 º 28 º 18 º 30 º N606062 N610102 N612122 N615202 N620152 N606066 N610106 N612126 N615206 N620156 Dimensions All in mm Angle 1 1 5 61.0 28 º 18 º 30 º N812122 N815202 N820152 N812126 N815206 N820156
Tungsten Carbide Rotary Burrs Rim Shape A Rectangle R Radius RA 90º RAR 90º+Rad Profile Shapes l1 l2 d2 Dimensions All in mm Cut 2 10.0 1.6 3 A A3101.62 Dimensions All in mm Cut 2 12 3 2.6 3.2 5.5 6.1 4 4 51.0 51.0 A RAR RA R RAR A6122.62 RAR625032 RA625052 R625062 RAR638062 Dimensions All in mm Cut 2 25 3 3.2 5.5 6.1 4 51.0 51.0 RAR RA R RAR RAR825032 RA825052 R825062 RAR838062 www.procut.ie 19
procut part of the ATA group Miniature Range Cylinder without Endcut Shape A, ZYA, SA Dimensions All in mm 1.5 2.0 2.5 12.0 4.7 3 3 3 3 3 37.0 4 A31.5062 A302112 A32.5122 A303142 A305122 A306052 A306122 A31.5066 A302116 A32.5126 A303146 A305126 A306056 A306126 A303143 A306123 Cylinder with Endcut Shape B, ZYAS, SB Dimensions All in mm 1.5 2.0 2.5 12.0 4.7 3 3 3 3 3 37.0 4 B31.5062 B302112 B32.5122 B303142 B305122 B306052 B306122 B31.5066 B302116 B32.5126 B303146 B305126 B306056 B306126 B303143 B306123 Ball Nosed Cylinder Shape C, WRC, SC Dimensions All in mm 2.0 2.5 3 3 3 3 4 C302112 C32.5112 C303122 C305122 C306122 C302116 C32.5116 C303126 C305126 C306126 C303123 C306123 Ball Shape D, KUD, SD Dimensions All in mm 2.0 2.5 1.8 2.3 2.5 3.4 4.7 3 3 3 3 3 3 D302022 D32.52.52 D303032 D304042 D305052 D306062 D302026 D32.52.56 D303036 D304046 D305056 D306066 D303033 D304043 D306063
Tungsten Carbide Rotary Burrs Oval Shape E, TRE, SE Dimensions All in mm 9.5 3 3 42.0 E303062 E305082 E306102 E303066 E305086 E306106 E303063 E306103 Ball Nosed Tree Shape F, RBF, SF Dimensions All in mm 3 3 3 3 4 F303062 F303082 F303122 F305122 F306122 F303066 F303086 F303126 F305126 F306126 F303123 F306123 Pointed Tree Shape G, SPG, SG Dimensions All in mm 10.0 3 3 3 3 4 G303062 G303102 G303122 G305122 G306122 G303066 G303106 G303126 G305126 G306126 G303123 G306123 Flame Shape H, SH Dimensions All in mm 9.5 10.0 3 3 4 H303062 H305102 H306122 H303066 H305106 H306126 60º Countersink Shape J, KSJ, SJ Dimensions All in mm 2.5 3 J303032 J303036 www.procut.ie 21
procut part of the ATA group Miniature Range 90º Countersink Shape K, KSK, SK Dimensions All in mm 1.5 3 K303032 K303036 Ball Nosed Cone Shape L, KEL, SL Dimensions All in mm Angle 10.0 15.8 3 3 3 4 10º 8º 14º 22º L303102 L303122 L305122 L306122 L303106 L303126 L305126 L306126 L303123 L306123 Cone Shape M, SKM, SM Dimensions All in mm Angle 1 3 3 3 49.0 18º 14º 10º 22º M303082 M303112 M303152 M306122 M303086 M303116 M303156 M306126 M303113 M306123 Inverted Cone Shape N, WKN, SN Dimensions All in mm Angle 6.4 6.4 3 39.0 3 39.0 10º 12º 10º 12º N303042 N306062 N303042E* N306062E* N303046 N306066 N303046E* N306066E* * Inverted cone with endcut Rim Dimensions All in mm 10.0 1.6 3 A3101.62
Tungsten Carbide Rotary Burrs Micro Range High tolerance geometry for precision applications Dimensions All in mm Cylinder without Endcut Shape A 1.0 1.5 2.0 3 3 3 Cut 2 MICRO A301042 MICRO A31.5042 MICRO A302042 MICRO Dimensions All in mm Ball Nosed Cylinder Shape C 1.0 1.5 2.0 3. 3 3 Cut 2 MICRO C301042 MICRO C31.5042 MICRO C302042 MICRO Dimensions All in mm Cut 2 MICRO Ball Shape D 1.0 1.5 2.0 0.9 1.4 1.8 3 3 3 D301012 MICRO D31.51.52 MICRO D302022 MICRO Oval Shape E Dimensions All in mm 1.5 3 Cut 2 MICRO E31.5042 MICRO Ball Nosed Tree Shape F Dimensions All in mm 1.5 3 Cut 2 MICRO F31.5042 MICRO Pointed Tree Shape G Dimensions All in mm 1.5 3 Cut 2 MICRO G31.5042 MICRO Cone Shape M Dimensions All in mm Angle 1.5 3 16 º Cut 2 MICRO M31.5042 MICRO www.procut.ie 23
procut part of the ATA group Long Shank Range Cylinder without Endcut Shape A, ZYA, SA Dimensions All in mm 50 75 100 A30314250 A30314275 A303142100 A30314650 A30314675 A303146100 1 1 100 150 172 172 178 A606182100 A606182150 A608202170 A610202170 A612252175 A606186100 A606186150 A608206170 A610206170 A612256175* Cylinder with Endcut Shape B, ZYAS, SB Dimensions All in mm 50 75 100 B30314250 B30314275 B303142100 B30314650 B30314675 B303146100 1 1 100 150 172 172 178 B606182100 B606182150 B608202170 B610202170 B612252175 B606186100 B606186150 B608206170 B610206170 B612256175* Ball Nosed Cylinder Shape C, WRC, SC Dimensions All in mm 50 75 100 C30312250 C30312275 C303122100 C30312650 C30312675 C303126100 1 1 100 150 172 172 178 C606182100 C606182150 C608202170 C610202170 C612252175 C606186100 C606186150 C608206170 C610206170 C612256175* *Also available with
Tungsten Carbide Rotary Burrs Ball Shape D, KUD, SD Dimensions All in mm 2.5 2.5 50 75 D30303250 D30303275 D30303650 D30303675 182 184 164 D608082180 D610102185 D612122162 D608086180 D610102185 D612126162* Oval Shape E, TRE, SE Dimensions All in mm 50 75 E30306250 E30306275 E30306650 E30306675 1 22.0 168 175 E610152165 E612202170 E610156165 E612206170* Ball Nosed Tree Shape F, RBF, SF Dimensions All in mm 50 75 F30312250 F30312275 F30312650 F30312675 1 150 172 178 F606182150 F610202170 F612252175 F606186150 F610206170 F612256175* *Also available with www.procut.ie 25
procut part of the ATA group Long Shank Range Pointed Tree Shape G, SPG, SG Dimensions All in mm 50 75 G30312250 G30312275 G30312650 G30312675 172 178 G610202170 G612252175 G610206170 G612255175* Flame Shape H, SH Dimensions All in mm 50 75 H30306250 H30306275 H30306650 H30306675 32.0 172 178 H608202170 H612322182 H608206170 H612326182* Ball Nosed Cone Shape L, KEL, SL Dimensions All in mm Angle 50 75 8 º 8 º L30312250 L30312275 L30312650 L30312675 Angle 30.0 30.2 183 185 L610262176 L612282182 L610266176 L612286182* *Also available with
Tungsten Carbide Rotary Burrs Coated Range TiAlN coated for extended tool life Cylinder without Endcut Shape A, ZYA, SA Dimensions All in mm Cut 6 Cut 3 3 A303146 TIALN Cut 6 Cut 3 1 A606186 TIALN A608206 TIALN A610206 TIALN A612256 TIALN A610203 TIALN A612253 TIALN Cylinder with Endcut Shape B, ZYAS, SB Dimensions All in mm Cut 6 Cut 3 3 B303146 TIALN Cut 6 Cut 3 1 B606186 TIALN B608206 TIALN B610206 TIALN B612256 TIALN B610203 TIALN B612253 TIALN Ball Nosed Cylinder Shape C, WRC, SC Dimensions All in mm Cut 6 Cut 3 3 C303126 TIALN Cut 6 Cut 3 1 C606186 TIALN C608206 TIALN C610206 TIALN C612256 TIALN C610203 TIALN C612253 TIALN www.procut.ie 27
procut part of the ATA group Coated Range Ball Shape D, KUD, SD Dimensions All in mm Cut 6 Cut 3 2.5 3 D303036 TIALN Cut 6 Cut 3 4.7 52.0 5 5 D606066 TIALN D608086 TIALN D610106 TIALN D612126 TIALN D610103 TIALN D612123 TIALN Ball Nosed Tree Shape F, RBF, SF Dimensions All in mm Cut 6 Cut 3 3 F303126 TIALN Cut 6 Cut 3 1 25 6 F606186 TIALN F610206 TIALN F612256 TIALN F610203 TIALN F612253 TIALN Pointed Tree Shape G, SPG, SG Dimensions All in mm Cut 6 Cut 3 3 G303126 TIALN Cut 6 Cut 3 1 G606186 TIALN G610206 TIALN G612256 TIALN
Tungsten Carbide Rotary Burrs Coated Range Flame Shape H, SH Dimensions All in mm Cut 6 Cut 3 32.0 77.0 H608206 TIALN H612326 TIALN Ball Nosed Cone Shape L, KEL, SL Dimensions All in mm Cut 6 Cut 3 3 L303126 TIALN Cut 2 Cut 3 32.0 77.0 L612286 TIALN L612283 TIALN www.procut.ie 29
procut part of the ATA group Diamond Cut Router Range for fibre glass and composite materials (GFK, CFK) Dimensions All in mm Cut 8 Without Endcut 10.0 12.0 1 1 30.0 10.0 12.0 4 6 6 6 7 P303138 P404168 P606198 P808258 P1010258 P1212308 Dimensions All in mm Cut 8 With Endcut 10.0 12.0 1 1 30.0 10.0 12.0 4 6 6 6 7 P303138E P404168E P606198E P808258E P1010258E P1212308E Dimensions All in mm Two Flute Endmill Endcut 10.0 12.0 1 1 30.0 10.0 12.0 4 6 6 6 7 Cut 8 P303138ME P404168ME P606198ME P808258ME P1010258ME P1212308ME Dimensions All in mm 135º Drill Point 10.0 12.0 1 1 30.0 10.0 12.0 4 6 6 6 7 Cut 8 P303138DP P404168DP P606198DP P808258DP P1010258DP P1212308DP
Tungsten Carbide Rotary Burrs Power Cut Range for heavy duty applications (Foundries / Shipyards) Cylinder without Endcut Shape A, ZYA, SA Dimensions All in mm Cut 5 1 A610205 A612255 A615255 Cut 5 A812255 Cylinder with Endcut Shape B, ZYAS, SB Dimensions All in mm Cut 5 1 B610205 B612255 B615255 Cut 5 B812255 Ball Nosed Cylinder Shape C, WRC, SC Dimensions All in mm Cut 5 1 C608205 C610205 C612255 C615255 Cut 5 C812255 www.procut.ie 31
procut part of the ATA group Power Cut Range Ball Shape D, KUD, SD Dimensions All in mm Cut 5 5 5 D610105 D612125 Oval Shape E, TRE, SE Dimensions All in mm Cut 5 1 22.0 60.0 67.0 E610155 E612205 Ball Nosed Tree Shape F, RBF, SF Dimensions All in mm Cut 5 1 25 25 F610205 F612255 F615255 Cut 5 1 25 25 F812255 F815255
Tungsten Carbide Rotary Burrs Power Cut Range Pointed Tree Shape G, SPG, SG Dimensions All in mm Cut 5 G610205 G612255 Cut 5 G812255 Flame Shape H, SH Dimensions All in mm Cut 5 32.0 77.0 H612325 Ball Nosed Cone Shape L, KEL, SL Dimensions All in mm Angle Cut 5 1 30.0 32.0 3 7 77.0 7 L608225 L610265 L612285 L615335 Angle Cut 5 32.0 77.0 L812285 Cone Shape M, SKM, SM Dimensions All in mm Angle Cut 5 22.0 7.1 28 º M612225 www.procut.ie 33
procut part of the ATA group Burr Sets Burr Set 8pc ( Shank/Cut 6) Part Number: BS2 A612256 C610206 C612256 D612126 E610156 F610206 F612256 G610206 Burr Set 5pc ( Shank/Cut 6) Part Number: BS6 B610206 C612256 F612256 G610206 L612286 Coated Burr Set 5pc ( Shank/Cut 6) Part Number: BSCB6 B610206 TIALN C612256 TIALN F612256 TIALN G610206 TIALN L612286 TIALN Power Cut Burr Set 5pc ( Shank/Cut 5) Part Number: BSPC5 B612255 C612255 F612255 G612255 L612285 Burr Set 10pc ( Shank/Cut 6) Part Number: BS1A A303146 C303126 D303036 E303066 F303126 G303126 H303066 L303126 M303116 N303046 Micro Burr Set 10pc ( Shank/Cut 2 MICRO) Part Number: BSMICRO A301042 MICRO A31.5042 MICRO C301042 MICRO C31.5042 MICRO D301012 MICRO D31.51.52 MICRO E31.5042 MICRO F31.5042 MICRO G31.5042 MICRO M31.5042 MICRO 40pc Burr Display Part Number: BS40 2 pieces of each part included B606186 B608206 B610206 B612256 C606186 C608206 C610206 C612256 F606186 F608206 F610206 F612256 G606186 G608206 G610206 G612256 L606186 L608226 L610266 L612286 Secure lockable design Dimensions: (w)165mm x (h)310mm x (l)245mm
Recommendations For Use It may be necessary to alter the running speeds from those shown in the speed chart in order to achieve optimum performance. Harder materials require slower running speeds. Smaller burrs require faster running speeds. Long burrs require slower speeds for safety reasons. Apply constant movement and light pressure when using the burr. Running below the optimum speed will cause chipping. Running above optimum speed will cause premature tooth wear. Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the. Using tools and collets which have become worn will encourage chipping. Do not sink the burr for more than one third of its periphery. Always Remember to Wear Ear Protection Face Mask Safety Glasses Protective Gloves www.procut.ie 35
t +353 49 432 6178 f +353 49 432 6298 e sales@atagroup.ie w www.atagroup.ie ATA Group IDA Business & Technology Park, Killygarry, Cavan, Co Cavan, Ireland