Engine Powered Forklift Trucks 2.0 3.5 tonnes FD/FG20N FD/FG25N FD/FG30N FD/FG35N
1.1 1.2 1.3 1.4 1.5 1.6 1.8 1.9 2.1 2.2 2.3 3.1 3.2 3.3 3.5 3.6 3.7 4.1 4.2 4.3 4.4 4.5 4.7 4.8 4.12 4.19 4.20 4.21 4.22 4.23 4.24 4.31 4.32 4.33 4.34 4.35 4.36 5.1 5.2 5.3 5.5 5.7 5.9 5.10 7.1 7.2 7.3 7.4 7.5 8.1 8.2 8.3 8.4 8.5 Characteristics Manufacturer (abbreviation) Manufacturer s model designation Power source: (battery, diesel,, petrol) Operator type: pedestrian, (operator)standing, seated Load capacity Load centre distance Load distance, axle to fork face Wheelbase Weight Truck weight, without load / including battery (simplex mast, lowest lift height) Axle loading with maximum load, front/rear (simplex mast, lowest lift height) Axle loading without load, front/rear (simplex mast, lowest lift height) Wheels, Drive Train Tyres: V=solid, L=pneumatic, SE=solid pneumatic front/rear Tyre dimensions, front Tyre dimensions, rear Number of wheels, front/rear (x=driven) Track width (centre of tyres), front Track width (centre of tyres), rear Dimensions Mast tilt, forwards/backwards Height with mast lowered (see tables) Free lift (see tables) Lift height (see tables) Overall height with mast raised Height to top of overhead guard Seat height Tow coupling height Overall length Length to fork face (includes fork thickness) Overall width Fork dimensions (thickness, width, length) Fork carriage to DIN 15 1 A/B/no Fork carriage width Ground clearance under mast, with load Ground clearance at centre of wheelbase, with load (forks lowered) Working aisle width with 0 x1200 mm pallets, crosswise Working aisle width with 800 x1200 mm pallets, crosswise Turning circle radius Minimum distance between centres of rotation Performance Travel speed, with/without load Lifting speed, with/without load Lowering speed, with/without load Rated drawbar pull, with/without load Gradeability, with/without load Acceleration time (10 metres) with/without load Service brakes (mechanical/hydraulic/electric/pneumatic) IC Engine Manufacturer / Type Rated output to ISO 1585 Rated speed to DIN 70 020 Number of cylinders / cubic capacity Fuel consumption according to VDI 60 cycle Miscellaneous Type of drive control Maximum operating pressure for attachments Oil flow for attachments Noise level, value at operator s ear (EN 12053) Towing coupling design / DIN type, ref. Q c x y b10 b11 () / h1 h2 h3 h4 h6 h7 h10 l1 l2 b1/b2 s,e,l b3 m1 m2 Ast Ast Wa b13 km/h m/s m/s N % s kw rpm /cm3 l/h / /h bar l/min db(a) FD20N 2000 3420 4690 / 0 1 / 1920 7.0012 6.009 3558 2488 40 x x 1070 0 3855 3655 2196 0.64 / 0.67 17200 / 16700 34 / Hydraulic S4SDPB 38kW FD25N 2 3710 5480 / 0 1480 / 2230 7.0012 6.009 3625 2555 40 x x 1070 0 3885 3685 2233 0.64 / 0.67 0 / 16600 29 / S4SDPB 38kW FD30N 3000 6530 / 830 1780 / 2580 28x915 6.5010 3270 4330 330 35 2725 1275 / 1690 0 165 4070 3870 2380 0.51 / 0.54 0.53 / 0.50 16600 / 16600 24 / S4SDPB 38kW FD35N 3 4770 7270 / 0 1720 / 3050 25015 6.5010 2175 340 3860 20 1290 / 1690 0 150 170 4130 3930 2440 0.43 / 0.46 0.42 / 0.40 15800 / 15800 20 / S4SDPB 38kW Powershift / 1 Powershift / 1 Powershift / 1 Powershift / 1 Powershift / 1 Powershift / 1 Powershift / 1 Powershift / 1 75 75 68 68 FG20N 2000 3 4650 / 660 1460 / 1850 7.0012 6.009 3558 2488 40 x x 1070 0 3855 3655 2196 0.59 / 0.61 15200 / 10 30 / K21 LE 42 4 / 2065 FG25N 2 3610 5440 / 670 1440 / 2170 7.0012 6.009 3625 2555 40 x x 1070 0 3885 3685 2233 0.59 / 0.61 10 / 14800 26 / K21 LE 42 4 / 2065 FG30N 3000 4250 6 / 760 10 / 2520 28x915 6.5010 3270 4330 330 35 2725 1275 / 1690 0 165 4070 3870 2380 0.52 / 0.53 0.53 / 0.50 17700 / 17700 26 / K25 LE 47 4 / 2488 FG35N 3 4660 7220 / 940 1680 / 2 25015 6.5010 2175 340 3860 20 1290 / 1690 0 150 170 4130 3930 2440 0.43 / 0.44 0.42 / 0.40 16900 / 16900 22 / Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic K25 LE 47 4 / 2488
Mast Performance and Capacity Mast type Simplex Duplex Triplex FD/FG20NFD/FG25N FD/FG20N FD/FG25N h3 h1 h4 h2/h5 Q @ h2/h5 Q @ c=mm c=mm mm mm mm mm mm 3000 1995 4050 2000 2 4340 2000 2 3740 2410 4770 2000 2 4 2590 5140 2000 2 4 2800 5530 2000 2 0 3050 6050 1950 2400 5 6550 1850* 2250* 6000 3550 7050 0* 2150* 3000 1995 4050 2000 2 4340 1130 2000 1130 2 3700 2410 4750 1390 2000 1390 2 4020 2590 5080 1570 2000 1570 2 30 0 4760 780 2000 780 2 4030 1900 5060 880 2000 880 2 4300 2000 5360 1950 2 4750 2140 5800 1130 1900 1130 2400 5060 2260 6140 1250 1850 1250 2350 5 2400 6540 1390 0 1390 2200* 5990 2590 7040 1570 1750* 1570 2* 6 2850 7540 1830 1650* 1830 1750* 7000 3050 8050 2040 1250* 2040 1250* Mast Performance and Capacity Mast type Simplex Duplex Triplex FD/FG30N FD/FG35N h3 h1 h4 h2/h5 Q @ h3 h1 h4 h2/h5 Q@ c=mm c=mm mm mm mm mm mm mm mm mm 3030 2050 4090 3000 3000 2 4060 3 3270 2170 4330 3000 3 3700 2430 4760 3000 3720 2510 4780 3 4000 2610 5060 3000 4000 2770 5060 3 4 2870 5560 3000 4 3010 5560 3 0 3120 6060 2900 0 3260 6060 3 5 3370 6560 2800 5 3510 6560 3350 6000 3640 7060 6000 3760 7060 3250 3000 2050 4060 1030 3000 3010 2 4070 1170 3 3250 2170 4 0 3000 1290 3 3700 2430 4760 1420 3000 3720 2625 4780 1610 3 4010 2610 5070 3000 4000 2770 5060 1750 3 3690 1830 4750 810 3000 30 1940 40 930 3 3990 1930 5050 910 3000 4010 2060 5070 1050 3 4320 2050 5380 1030 3000 4390 2 5450 1170 3 4700 2170 5760 0 3000 4700 5760 1290 3 5060 2290 6120 1270 2900 5030 2450 6090 1430 3450 5450 2430 6510 1420 2800 5580 2630 6640 1610 5970 2610 7030 6000 2770 7060 1750 3200 6470 2870 7530 1860 2350 6510 2940 7570 1930 2350 7000 3070 8060 2060 7000 3140 8060 2120 h1 h2 h3 h4 h5 Q c Height with mast lowered Standard free lift Lift height Height with mast raised Full free lift Lifting capacity, rated load Load centre (distance) * Capacities shown require truck equipped with dual tyres. Consult your dealer for the maximum back tilt allowed, to obtain the capacities specified. The capacities are applicable for pneumatic shaped solid tyres (SE). All dimensions include load backrest. In case load backrest is not used h5 will increase by 390mm (20N, 25N), 350mm (30N), 240mm (35N), while h4 will decrease by 390mm (20N, 25N), 350mm (30N), 240mm (35N). CESM1049 (04/08) 2008 MCFE Printed in The Netherlands mitforklift@mcfe.nl www.mitforklift.com NOTE: Performance specifications may vary depending on standard manufacturing tolerances, vehicle condition, types of tyres, floor or surface conditions, applications or operating environment. Trucks may be shown with nonstandard options. Specific performance requirements and locally available configurations should be discussed with your distributor of forklift trucks. follows a policy of continual product improvement. For this reason, some materials, options and specifications could change without notice.
Main features Developed to help your driver achieve maximum productivity, the FD/FG N series from redefines the standard for IC engine counter balance forklift trucks. No other forklift has so many advanced features or offers such unbeatable value for money. Low noise levels which increase operator comfort. Fully floating powertrain ensures exceptionally low noise and vibration levels reducing driver stress. Highperformance, easytomaintain diesel engines give low exhaust emissions and low fuel consumption. Stateoftheart LPG engines with engine management system and regulated catalytic converter for high performance, low emissions and low fuel consumption. Clear instrument display monitoring all vital functions of the forklift trucks which includes neutral indicator for improved safety. Adjustable steering column with memory function helps guarantee optimum driving position, every time. Carcomfort, fully adjustable suspension seat is fitted with hip restraints, seatbelt (with indicator) and cutout switch to prevent drive and lift/lower operations unless the driver is seated. Automotive style pedal layout with selfenergising and selfadjusting drum brakes for easy operation with little effort. Attractive operator compartment with tilt cylinders, dashboard and foot area fully covered. Highvisibility mast, fork carriage and head guard ensure excellent allround vision. Long service interval hours reduces cost of ownership and increases productivity. Optional features Fingertip controls mounted on ergonomically positioned armrest. Integral sideshifter for ease of handling. A range of factoryfitted cabins. Mast levelling control for improved productivity.
Developed for outstanding performance and genuine value for money, the awardwinning* range of forklift trucks and warehouse equipment is built to a higher specification to maximize productivity and ensure utter reliability... whatever the application. It s what you d expect from one of the world s largest corporations whose companies are at the leading edge of technologies where performance, quality and dependability can never be compromised. It means that, from a single safe source, we can meet 98% of all handling requirements, supplied to you via a range of competitive finance options including outright purchase, rental or leasing. So your local dealer can advise you on precisely the right product for your application... and your budget. Moreover, because we understand how much you depend on your forklift truck, we deliver the highest levels of customer support. Through a network of carefully selected dealerships, we provide quality maintenance and customer care programmes including a choice of warranties that give complete peace of mind. Every dealership holds extensive stocks of manufacturerapproved parts, backed by a central store that holds literally millions of items constantly in stock and achieves a firstpick fulfilled rate of 97%. So your truck can be fixed first time, virtually every time. You can find your nearest dealer at www.mitforklift.com * Forklift Trucks has won four separate Fork Lift Truck Association Annual Awards for Excellence covering the areas of Ergonomics, the Environment and Innovation.