MADE IN THE USA MANUFACTURER S MANUFACTURER, INC. Since 1978 Professional Paint & Body Equipment Volume 6 www.mfgmfg.com 339 West Avenue I - Lancaster, CA 93534-800-237-6913 Fax 661-942-7753
Fender Stand Part No. 1001 Holds fenders for prepping and painting Foam pads to cushion panels Adjustable height Prevents creases or dents when assembling doors, hoods, fenders, etc. Chain load: 520 lbs. The Truck Bed Dolly Part No. 1999 Sturdy enough to hold any truck bed from Compacts to Duallys. 6 Heavy Duty Wheels Locking Wheels to keep unit in place Wheel Capacity Load: 2400 lbs. Made with Heavy Duty Steel Welded Frame (not bolted) for Maximum Strength and Stability Measurements: 30 H x 46 W x 58 L Easy Assembly! Shipping Weight: 130lbs. Made in the U.S.A.
Bodyman s Buddy Part No. 2000 Saves time, avoids loss and damage of parts. Hoods, fenders and doors can be hung from the top on hooks. Take everything to the job in one trip. Easy rolling, heavy duty casters Metal shelfs with 1 edge for those small nuts, bolts and clips Five S-Hooks included for hanging parts 24 wide, 46 long, 5 tall Shipping weight: 90 lbs.
The Painter s Pal Part No. 2001 Carries everything the painter needs to the job or spray booth. Masking work station holds paper widths of 3, 6, 12 and 18 Hooks for two gravity spray guns Holders for two DA Sanders Bottom tray for miscellaneous items Upper trays for holding bottles and spray cans Made in the USA Measurements: 17 w x 30 l x 33 h 4-Roll Mini Prep Station Part No. 2002 Complete Painters Mobile Work Station Complete Masking Work Station holds masking paper up to 36 wide and 2 rolls of plastic car covers or plastic masking material Hooks for 2 gravity feed spray guns The upper tray holds bottles, spray cans and square gallon cans - plus a 10 x 41 work table for mixing or additional storage Bottom tray for paint paddles, strainers, sand paper, masking tape, etc. Heavy Duty Construction Easy Mobility
The Mule Part No. 2003 Keep All Your Parts in One Easy to Move Location! Easy to roll storage cart for parts and accessories Large, Durable Plastic Bins 36 l x 24 w x 8 d Plastic Bins are removable! Includes Hooks to hang fenders, bumpers, etc. Great for small jobs. Removable Bins can be used to store parts inside the vehicle. 4 Heavy Duty Swivel Casters Heavy Duty Steel Construction Made in the USA Extra Bins Available (Part No. 200301)
The Bumper Rack Part No. 2005 Great Space Saving Rack Keeps Bumpers Off the Floor No more Damaged Bumpers Great for Parts Department Holds 6 Bumpers or more Welded Construction Heavy Duty Wheels Easy to Assemble Made in the USA Measurements: 80 H x 42 W x 24 D Also available without wheels; Part No. 2006 The Bumper Rack Maximize Storage Minimize Damage Part No. 2007 Part No. 2008 No more Damaged Bumpers Great for Parts Department Heavy Duty, Steel Construction Heavy Duty Wheels 1 1/4 Square Tubing, with Welded Wall Mounting Brackets 1 Square Tubing is used for the 24 long support arms Made in the USA
XL Bumper Rack Part No. 2009 Holds 12 Urethane or Metal Bumpers safely off the floor to avoid damage Double Sided Rack for Maximum Bumper Storage Great for Parts Departments No More Damaged Parts Large Base to ensure stability Constructed of heavy-duty steel Easy rolling, 4 heavy-duty casters Easy to Assemble Made in the USA Hood Handler Part No. 2016 Parts Department Use this rack to store hoods and doors Paint and Body Shop Use this rack to provide a safe storage place for Painted hoods and doors. No More Damaged Parts Constructed of heavy-duty steel Easy rolling, 4 heavy-duty casters Easy to Assemble Made in the USA
Maskers Bench or Wall Mount Unique, easy top-loading feature for changing rolls quickly. Bench Maskers Square tube steel construction for maximum durability Fully adjustable tape roll for accurate alignment of tape Replacement parts readily available 12 Bench Mount Masker............. 3612 18 Bench Mount Masker............. 3618 24 Bench Mount Masker............. 3624 36 Bench Mount Masker............. 3646 Wall Mount Maskers 18 Step Masker Part No. 3333 12 Wall Mount Masker............... 3613 18 Wall Mount Masker............... 3619 24 Wall Mount Masker............... 3625 36 Wall Mount Masker............... 3636 Holds up to 18 paper and 1 roll of tape Unit can be used as a step for masking high surfaces or a seat for lower surfaces. Heavy Duty, welded steel construction
The Bumper Stand Part No. 3401 Sand, Prep and Paint all on The Bumper Stand Tilting action allows easy access to all parts of the bumper, allows you to set your own working angle and height. Easy to use,telescoping arms adjust easily using T-bolts Telescoping Arms holds bumpers firmly in place, adjust in and out, rotates 360º Adjustable work top also holds panels, doors and hoods Made in the U.S.A.
The Tire Dolly Part No. 2050 A Must for Every Frame Rack Saves Space No Tripping Over Tires on the Floor Less Damage to Wheels While Vehicle is on the Frame Machine Save Technicians Backs and Legs 4 Heavy Duty Swivel Casters Base is made using 1 ½ Heavy Duty Square Tubing Handle is made using 1 Heavy Duty Square Tubing Easy Assembly Made in the U.S.A. Wheel Dolly Part No. 3344 4 Heavy Duty Swivel Wheels 2 Wheels with locking brakes to keep dolly in place Made with heavy duty steel Welded frame for maximum strength and stability Wheel capacity load: 1200 lbs. Made in the USA Sold as a set (2 per set)
The Door Handler Part No. 2400 Saves Time, Avoids Loss and Damaged Doors One technician can easily install a door without assistance. Hang doors while the vehicle is on the Frame Rack. The Door Handler will accommodate any size door, even 5 Rear Van Doors. The Door Handler is adjustable from as low as 7 to as high as 7½. Cranking Assembly is rated for 3500 pounds. Large Base (18 x 26 ) to ensure stability for any size door Constructed of heavy-duty 1/8 thick steel. Easy rolling, 4 heavy-duty casters
4 Roll Side Load Masker Part No. 3400 Holds up to 4 rolls of masking paper 3, 6, 12 and 18 Masking Paper can be used Easy Load Design Light weight for easy mobility Steel Construction Easy to Assemble Made in the USA 3 Roll Side Load Masker Part No. 3403 Holds up to 3 rolls of masking paper 6, 12 and 18 Masking Paper can be used Easy Load Design Light weight for easy mobility Steel Construction Easy to Assemble Made in the USA
Plastic Maskers A dispenser for rolls of 12 x 400 plastic Large or small plastic car covers can be used Easy mobility and adjusts to fit any roll length Single Roll.......3396 Double Roll...... 3397 Three paper roll bars Each bar holds multiple rolls of various papers up to 18 Multi-Roll Masker Part No. 3610 3, 6, 12, and 18 paper can be used on this masker Easy to load Rugged construction Light weight masker rolls easily around the shop
M ANUFACTURER S MANUFACTURER, I NC. 1-8 0 0-2 3 7-6 9 1 3 WWW.MFGMFG.COM
The Filling Station II Gravity Gun Holders 9991 9992 9993 9994 The Filling Station II will bolt to any vertical surface, wall or counters. Holds any gravity feed spray gun securely in place Mount on vertical surfaces in paint booth and cleaning areas Strainer holder makes it easier to strain paint while in spray booth Holds plastic or aluminum cups Sturdy, economical SaveTwice! Fewer spills; less paint loss Less Mess; save clean-up time
The Tipper Part No. 2010 The Tipper offers an easy way to dispense 5 gallon drums of thinners and reducers without spills or waste. Drum Dolly Part No. 3398 Heavy steel, all welded construction 4 swivel wheels Great for easy mobility of 55 gallon drums, also great for trash containers! The Tool Hookers Eliminates dirt and costly gouges to backing pads. No more bent shafts due to falling off work benches. Easily mounts to wall, carts or work benches. Part No. 8000 Fits all D.A. Sanders with any 6 pad attached. Part No. 8001 Holds all Buffers / Grinders with 9 disc or buffing pad attached. Part No. 8002 Holds one Buffer / Grinder and one D.A. Sander with pads of any thickness.