Page 1 This catalogue is meant merely as a guide. The auctioneer does not warrant the genuineness, accuracy or count of any items described herein. 1 Bally Engineered Structures 18 ft. x 32 ft. x 12 ft. High (est. interior dimension) Double Swing Door Hot/Cold Vehicle Test Chamber, with Steel Plate Insulated Floor, (2) Bohn 3-Fan Overhead Refrigeration Units, Bohn/Heatcraft Twin-Fan Remote Condenser Model BCU1030ABEX602, S/N A11F0073, Man Door, Lights, Computer Control 2 Bally Engineered Structures 18 ft. x 32 ft. x 12 ft. High (est. interior dimension) Double Swing Door Hot/Cold Vehicle Test Chamber, with Steel Plate Insulated Floor, (2) Bohn 3-Fan Overhead Refrigeration Units, Bohn/Heatcraft Twin-Fan Remote Condenser Model BCU1025ABEX602, S/N A11F0074, Adjustable Height Suspended Heat Lamp System, Man Door, Lights, Computer Control 3 Bally Engineering Structures 12 ft. x 25 ft. x 10 ft. (est. interior dimension) Cold Environmental Test Chamber, with 10Æ Double Swing Door, Refrigeration Equipment, Avon Refrigeration Controls, Friedrich Reciprocating Refrigeration Compressor, Grasso Reciprocating Refrigeration Compressor 4 Cincinnati Sub-Zero Environmental Test Chamber Model ZH-32-2-2-H/AC, S/N Z9923122, 38 in. x 38 in. x 38 in. Interior, (2) Adjustable Racks, PLC Control 5 Incomplete Transmission Test Cell #3, with BCT 48 in. x 144 in. x 14 in. Cast Iron T-Slot Transmission Test Equipment Mounting Base with Marathon 50 HP AC Motor with Drive Shaft, Assorted Mounting Brackets, Partial Controls (not including through-building exhaust fans) 6 Incomplete Engine Test Cell #7, with BCT 48 in. x 96 in. x 7 in. Cast Iron T-Slot Equipment Mounting Base, Engine Stand, Dodge Bearing Set, Water Brake, Super Flow Control & Console, Electric Chain Hoist with Monorail (not including through-building exhaust fans) 7 Incomplete Engine Test Cell #8, with Custom Fabricated Adjustable Slotted Base, Engine Stand, Water Brake, Electrics, Surge Tank, CM Lodestar 1/4 Ton Electric Chain Hoist with Monorail, Super Flow Console, Partial PLC Controls, Computer (not including through-building exhaust fans) 8 Incomplete Engine Test Cell #9, with Custom Fabricated Adjustable Slotted Base, Partial Cooling Water System, CM Lodestar 1 Ton Electric Chain Hoist with Monorail, Partial Controls (not including through-building exhaust fans) 9 Incomplete Engine Test Cell #10, with CM Lodestar 1/4 Ton Electric Chain Hoist with Monorail (not including through-building exhaust fans) 10 Incomplete Containerized Portable Test Cell, with 20Æ Shipping Container, S/N SAC1026607, Custom Fabricated Adjustable Slotted Base, Cooling Water System, Fractional HP Air Compressor, Surge Tank, (2) Main Doors, Lights, Sound Blankets, Harrington 1/2 Ton Electric Chain Hoist with Monorail, Partial Controls 11 Incomplete Containerized Portable Test Cell, with 20Æ Shipping Container, S/N SAC1026567, Custom Fabricated Adjustable Slotted Base, Cooling Water System, Fractional HP Air Compressor, Surge Tank, (2) Main Doors, Lights, Sound Blankets, Harrington 1/2 Ton Electric Chain Hoist with Monorail, Partial Controls 12 Incomplete Containerized Portable Test Cell, with 20Æ Shipping Container, S/N SAC1026554, Custom Fabricated Adjustable Slotted Base, Cooling Water System, Fractional HP Air Compressor, Surge Tank, (2) Main Doors, Lights, Sound Blankets, Harrington 1/2 Ton Electric Chain Hoist with Monorail, Partial Controls
Page 2 13 Incomplete Engine Test Cell #5, with Custom Fabricated Adjustable Slotted Base, Engine Mounting Stand, Partial Water System, No Controls (not including through-building exhaust fans) 14 Incomplete Engine Dyno/Test Cell #4, with Custom Fabricated Adjustable Slotted Base, Engine Mounting Stand, Drive Shaft, Dyno One/GE Inductor Dyno Type TH-10K, S/N DD-2-109 (500 HP, 2500-8000, 45 Min. Water Pressure, 15.756 Torque Arm), Water System, Muffler, Controls (not including through-building exhaust fans) 15 Application Engineering Glacier Series Self-Contained Chiller 16 Application Engineering Glacier Series Self-Contained Chiller 17 Application Engineering Glacier Series Self-Contained Chiller 18 Application Engineering Glacier Series Self-Contained Chiller 19 AEC Skid Mounted Cooling Water Holding Tank, with (4) Motor Driven Pumps 20 AEC Skid Mounted Cooling Water Holding Tank, with (4) Motor Driven Pumps 21 Marley Aquatower 90 Ton (est.) Cooling Tower, with Fabricated Support Tower 22 Marley Aquatower 90 Ton (est.) Cooling Tower, with Fabricated Support Tower 23 Marley Aquatower 90 Ton (est.) Cooling Tower, with Fabricated Support Tower 24 Marley Aquatower 90 Ton (est.) Cooling Tower, with Fabricated Support Tower 25 LOT: Baldor 400 HP Super E Electric Motor, with Baldor Adjustable Speed Drive, (2) Line Conditioners 26 Atlas Copco 30 HP Rotary Air Compressor Model GA22 27 Graham White Air Dryer 28 Ultra Filter Ultra Step Super Plus 30 Oil/Water Separator 29 30 in. Dia. x 10 ft. (est.) Vertical Air Receiver Tank 30 Mustang Eddy Current Dynamometer on Stand 31 LOT: Rolling Shop Cart with Eddy Current Dyno Calibration Arms 32 LOT: Pallet of (2) Superflow 901 Dynos & Parts, Water Brake 33 LOT: Pallet of Superflow 901 Water Brake, Dyno & Parts 34 Rolling Steel Shop Cart with Superflow 901 Water Brake, Dyno & Parts 35 LOT: Pallet of Superflow Throttle Control, Boxes & Actuators 36 LOT: Pallet of Pneumatic Starters & Adapters 37 LOT: Pallet of Dyno Parts 38 Klune V Custom Speed Multiplying Gear Box 39 LOT: (2) Vetronix PXA-1100 Gas Analyzers 40 LOT: (2) Superflow SF7100 Dyno Control Stations 41 Superflow SF7100 Dyno Control Station with Control Box 42 Superflow SF7100 Dyno Control Station with Wiring Harnesses 43 LOT: Superflow SF7100 Dyno Control Station with SF7400 Electrical Tower
Page 3 44 LOT: Superflow Control Station with SF-742 & SF-1853 Control Modules and PRO-ATC Control Box 45 LOT: (2) Superflow Control Boxes & Accessories 46 LOT: (2) Superflow Control Boxes & Accessories 47 Sorensen PRO-16-625T Power Supply 48 Sorensen PRO-16-625T Power Supply 49 LOT: (2) Sorensen DCR16-310T Power Supplies 50 LOT: (2) Sorensen DCR16-310T Power Supplies 51 LOT: (2) Sorensen DCR16-310T Power Supplies 52 Dodge Sleevoil Pillow Block Assembly with Dampener 53 LOT: Vetronix PXA-1100 Gas Analyzer & Parts 54 LOT: Pallet of Engine Jacks 55 Drive-All Mfg. 4-Speed Gear Reduction Box 56 LOT: U.S. Series 2000 Gear Reduction Box, Electric Motor & Pump 57 Tank Mounted Baldor Pump with Heat Exchanger 58 Tank Mounted U.S. Electric Pump 59 LOT: Contents of (2) Shelves, (3) Pallets Harrington and C&M Electric Chain Hoists - 1/2 Ton, Marathon Electric 50 HP Motor 60 LOT: Pallet of Plastic Bins - Auto Parts, Gasoline Discharge Hose with Fittings 61 LOT: Pallet of Electric Motors & Pumps 62 LOT: Pallet of Lifting Apparatus 63 Graham White Air System Model D27-2B17 64 Heat Exchanger Assembly 65 44 in. x 44 in. x 94 in. Insulated Control Building on Rolling Steel Dolly 66 LOT: (6) Cases Sta-Bil Fuel Treatment 67 LOT: (2) Rolling Steel Shop Carts with Pneumatic Devices 68 LOT: Welding Curtains & Rolling Cork Boards 69 Marley Aquatower Cooling Tower with Ducts 70 LOT: 5 ft. Forklift Forks with 46 in. I.D. Guard 71 Parker Balston Mono-Bed Nitrogen Generation System, with Absorption Tank, Coalescing Filters, Nitrogen Storage Tank, Air Surge Tank, Controls 72 Delta Rockwell 15 in. Drill Press, with Adjustable Work Table 73 Parma Mfg. 9 in. Work-A-Matic Manual Feed Vertical Band Saw, S/N 1196170, 18 in. x 29 in. Work Table 74 Parma Mfg. 9 in. Work-A-Matic Manual Feed Vertical Band Saw, S/N 59352, 18 in. x 29 in. Work Table 75 Dayton 6 in. Double End Pedestal Grinder 76 Rockwell 20 in. Vertical Band Saw, S/N 1446256, 24 in. x 24 in. Tilting Work Table 77 Carolina 60,000 lb. Heavy Duty H-Frame Manual Hydraulic Shop Press, 24 in. Between Housings 78 Jet 6 in. x 12 in. Belt/Disc Sander, Dual Tilting Work Tables
Page 4 79 17 in. Drill Press, Crank Adjustable Table 80 Rust Buster 2-Hole Reach-In Blast Cabinet 81 Colchester 18 in. x 60 in. Mascot 1600 Geared Head Engine Lathe, S/N 7/0004/03058, 20-1600 RPM, 12 in. 3-Jaw Chuck, Carriage with Cross Slide, Threading, Tailstock, Steady Rest, Pan Bed 82 Bridgeport 1 HP Vertical Mill, S/N 106847, 80-2720 RPM, 9 in. x 42 in. Work Table, DRO 83 Saw King 20 in. Variable Speed Vertical Band Saw Model KV-50, S/N V50409, 18 in. x 23.5 in. Tilting Work Table, Welder/Grinder 84 Wellsaw Horizontal Band Saw Model 58B, S/N 24226, Coolant 85 Jet 1-1/2 HP Bench Top Vertical Mill Model CVM-626, S/N 9250, 6 in. x 26 in. Work Table, with Bench 86 LOT: Cantilever Rack with Pipe Benders, Clamps & Pipe 87 LOT: 28 in. x 40 in. x 2 in. Thick Rolling Steel Table with Set-up Blocks 88 Craftsman 13-Drawer Tooling Cabinet with Contents of Threading Supplies, Drill Bits, etc. 89 LOT: (4) Hardware Bins with Large Assortment of Fasteners 90 LOT: 6 in. Jaw Kurt Vise with Swivel & 8 in. T-Slot Rotary Table 91 LOT: 6 in. Machine Vise, Drill Press Vise & 4-1/2 in. Machine Vise 92 4 ft. x 8 ft. Steel Fabrication Table with 6 in. Jaw Mechanics Vise & Chain Vise 93 H-Frame Hydraulic Press Brake 94 Toyota 6000 lb. LP Forklift Model 7FGU32, S/N 60015, Solid Tires, Overhead Guard, Side Shift, 187 in. Lift of 3-Stage Mast (seat needs repair) (delay removal) 95 Prime Mover 3000 lb. Electric Walk-Behind Stacker Lift 96 LOT: (7) Pallets of Engine & Vehicle Parts, Electrical Parts, Miscellaneous 97 LOT: Pallet of Engine Plugs & ECUs, etc. 98 LOT: (2) 42 in. x 48 in. Rolling Steel Tables with Wood Top 99 LOT: (2) Plastic Banding Carts with Tools 100 LOT: Signode Steel Banding Cart with Multiple Tools 101 LOT: (3) Tank Lifting Devices with Fork Pockets 102 Fork Truck Fork Manlift Safety Platform (Portable) 103 Push-Around Hydraulic Engine Hoist 104 Push-Around Hydraulic Engine Hoist 105 Push-Around Hydraulic Engine Hoist 106 Push-Around Hydraulic Engine Hoist 107 Push-Around Hydraulic Engine Hoist 108 LOT: Rolling Steel Table with Contents of Extruded Aluminum & Pneumatic Devices 109 Double-Door Lockable Small Parts Storage Cabinet, with Plastic Pans 110 Carbon Dioxide Fire Suppression System, with Tanks, Nozzles, Controls (disassembled) 111 LOT: (2) Steel Cabinets & Plastic Bin with Contents of Electrical Supplies, Welding Supplies & Misc.
Page 5 112 LOT: Cabinet with Contents of Electrical Components, Power Supplies, Hot Plates, etc. 113 LOT: (2) Transformers, 30 KVA & 75 KVA 114 Custom Fluid Pressure Pot 115 LOT: (2) 48 in. x 48 in. Steel Dollies 116 LOT: 48 in. x 48 in. and 36 in. x 36 in. Steel Dollies 117 47 in. x 108 in. x 4 in. Cast Iron T-Slot Layout Table, with Cast Iron Legs 118 LOT: (2) Dayton Centrifugal Pumps 119 LOT: Heat Exchanger, Sorensen Power Unit, Pneumatic Testing Device 120 Parker Hydraulic Pump 121 LOT: (2) Hydraulic Pumps 122 LOT: Steel Shelf, Plastic Bins & Totes with Large Quantity of Fittings, Fasteners, Electrical & Pneumatic Fixtures 123 LOT: Dayco Fuel Injector Hose Dispenser, Work Bench with Contents of Hardware & Electrical Supplies in Cabinets 124 Cantilever Rack 125 42 in. Drum Fan 126 42 in. Drum Fan 127 LOT: 28 in. Drum Fan & Pedestal Fan 128 LOT: (2) Fluid Transfer Stations with Extra Pumps 129 LOT: Battery Jump Start Unit with Extra Batteries 130 LOT: (1) Schumacher & (2) Dayton Battery Charger/Starters 131 LOT: Floor Jack, Jack Stands, Bottle Jacks 132 System One Model 500 Parts Washing Cabinet 133 LOT: (3) Rolling Shop Carts 134 LOT: Contents of Room including: Rolling Shop Cart, Auto Parts, Cleaning Accessories 135 Advance Electric Walk-Behind Floor Scrubber Model Convertamatic 260B/372450, S/N 0561548 136 LOT: (3) Rolling Steel Shop Carts 137 LOT: Rolling Wire Rack with Wire 138 LOT: Rolling Wire Rack with Wire 139 LOT: Greenlee 911 Wire Cart with Wire 140 LOT: Greenlee 911 Wire Cart with Wire 141 LOT: Greenlee 911 Wire Cart with Wire 142 Crated Trade Show Display 143 Miller 300 Amp Portable TIG Welder Model 330A/BP, Power Supply, Cables, Gun, Radiator, Flow Meter, Foot Treadle 144 Miller 250 Amp Portable TIG Welder Model Syncrowave 250, Power Supply, Cables, Gun, Radiator, Flow Meter, Foot Treadle 145 Miller 200 Amp Portable MIG Welder Model CP-200, Power Supply, Wire Feed, Cables, Gun, Flow Meter 146 Miller 250 Amp Portable MIG Welder Model Millermatic 250, Power Supply, Wire Feed, Cables, Gun, Flow Meter 147 LOT: Acetylene Torch Set, Cart, Torch, Hose, Gauges 148 LOT: TIG Wire & Accessories
Page 6 149 LOT: Large Assortment of Welding & C-Clamps 150 LOT: Enerpac Porta-Power & C&M 1/2 Ton Chain Hoist 151 LOT: Ridgid Tri Stand Power Chuck Model 300, with Cut-Off, Threading Heads, Reamer, Coolant, Support Stand 152 LOT: Oster Portable Power Chuck, with Threading Heads & Accessories 153 Atlas Copco Tensor S7 Programmable Torque Wrench, 1/2 in. Drive 154 Atlas Copco Tensor S7 Programmable Torque Wrench, 7/8 in. Drive 155 Atlas Copco Tensor S7 Programmable Torque Wrench, 3/8 in. Drive 156 Atlas Copco Tensor S7 Programmable Torque Wrench, 3/8 in. Drive 157 LOT: Assorted Atlas Copco Tensor 7 Controls & Cables 158 Techmotive Tool Programmable Torque Wrench, 1/2 in. Drive 159 Milwaukee 3/4 in. Magnetic Base Drill 160 LOT: Assorted Employee Lockers 161 LOT: Contents of Quality Control Room including: (2) Aeromotive Work Stations, (3) Steel Cabinets, Large Supply of Electronic & Computer Components, Ricoh Copier, etc. 162 LOT: BCT 48 in. x 96 in. x 6 in. Cast Iron T-Slot Test Equipment Mounting Base, with Assorted Torque Cells, Gear Box, Mounting Brackets 163 Flotec Portable Reverse Osmosis / Deionization Water Treatment System 164 Custom Portable Physical Testing Device 165 Portable Pneumatic Hinge Tester 166 Custom Portable Pneumatic Sill & Step Tester 167 LOT: Steel Table with Pneumatic Shock Tester 168 Custom Pneumatic Test Equipment PLC Controller 169 Custom Pneumatic Test Equipment PLC Controller 170 Custom Pneumatic Test Equipment PLC Controller 171 Custom Pneumatic Test Equipment PLC Controller 172 Computer Control Station 173 Computer Control Station 174 LOT: Rack with Contents of Building Supplies, etc. 175 LOT: Steel Cabinet with Contents of Maintenance Supplies 176 LOT: Collapsible Pallet with Contents of Plastic Bins 177 LOT: Milwaukee 1/2 in. Drill, Craftsman 3/8 in. Drill, Heat Gun 178 LOT: (3) Grinders 179 Craftsman Tool Box, with Contents 180 Craftsman Tool Box, with Contents 181 LOT: Rolling Steel Shop Cart with Contents of Pneumatic & Cordless Tools 182 LOT: Pipe Wrenches, Crescent Wrenches, Bolt Cutters, Tubing Bender & Crimpers 183 LOT: Sockets, Ratchets, Breaker Bars, Pullers, etc.
Page 7 184 LOT: (4) Torque Wrenches 185 LOT: (4) Torque Wrenches 186 LOT: Drill Doctor & Drill Indexes 187 LOT: Newport Calibration Thermometer, Fluke Digital Thermometers, Assorted Thermometers 188 LOT: Assorted Hot Plates 189 LOT: Accu-Weigh 20 lb. Digital Scale & Calibration Weights 190 LOT: Assorted Scale Weights 191 LOT: (3) Rolling Steel Racks with Large Quantity of Electrical Connectors & Components 192 ProMax RG5000 Refrigerant Recovery System 193 LOT: Yellow Jacket Gauges & DV200N Vacuum Pump 194 LOT: Snap-On EEPV509 Cylinder Leakage Tester & Compression Testers 195 General Motors Tech-2 Code Reader & Scanner 196 Actron Fuel Injection & Harness Tester 197 Hawkeye Bore Scope 198 Simpson Sound Meter 199 LOT: (3) Inficon Gas Detectors 200 IMI Model 699A02 Hand Held Shaker 201 LOT: (2) Chatillon DFGS100 Monitors 204 LOT: Omega BB703 Black Point Calibrator, Omega Hygrometer, Pro360 Digital Protractor, PTC Durometer 205 LOT: Micrometers & Parts, Gauge Blocks, Magnetic Dial Indicator Holders, Height & Depth Gauges 206 LOT: Approx. (25) Gly-Tec A2X253 Test Kits 207 60 in. x 96 in. Layout Table 208 60 in. x 96 in. Layout Table 209 Aeromotive Work Station 210 Aeromotive Work Station 211 24 in. x 36 in. x 4 in. Granite Surface Plate on Rolling Steel Stand 212 LOT: Contents of Foremans Office including: (2) Desks, (2) Shelving Units, Automotive ECUs, Wiring Harnesses, Auto Parts, Electrical Components, etc. (does not include phone system on wall) 213 LOT: Contents of Shipping Office including: Desk, Shelving Unit, Cabinet, Computer Components 214 Atlas Copco 30 HP Rotary Air Compressor Model GA22, S/N A11221507 215 Atlas Copco 30 HP Rotary Air Compressor Model GA22 216 Graham White Air Dryer 217 Ultra Filter Ultra Step Super Plus 30 Oil/Water Separator 218 30 in. Dia. x 10 ft. (est.) Vertical Air Receiver Tank 202 LOT: (3) Epsco EC-2 Volt & Amp Units 203 LOT: Thermocal Model 34, Modern Spider PW1015, Eaton 7540
Page 8 219 LOT: Contents of Maintenance Room including: Rack with Extruded Aluminum, (2) Fans & Blower, Shelving Units with Electrical Supplies & Components, Pneumatic Cylinders & Controls, Panel Boxes, Brass Hardware & Fittings, etc. 220 LOT: Contents of Storage Room including: Lockers, Shelving, (2) Steel Cabinets, Work Bench & Desk, Motors, Electric Components & Computer Components, Pneumatic Fixtures & Plastic Totes 221 LOT: (2) Pedestal Fans 234 Blueprint Cabinet 235 LOT: (3) Rolling Curtains 236 LOT: (3) Engine Run Stands 237 OPEN 238 OPEN 239 Pepsi Machine (may be removed from sale) 240 Pepsi Machine (may be removed from sale) 222 LOT: (3) Rolling Steel Dollies with Car Parts 223 LOT: (3) Operator Stands, (4) Computer Stations 224 LOT: (2) Custom Pneumatic Control Stations 225 LOT: (3) Rolling Test Devices 226 12 in. Disc Sander 227 Trinco Blast Cabinet 228 LOT: Rolling Carts, Work Bench, Tool Box, Work Supports 229 LOT: (2) Rolling Cantilever Racks with Raw Material 230 LOT: (4) Parts Bins & (4) Shelving Units with Contents of Hardware, Fittings, etc. 231 LOT: (2) Shelving Units, (2) Parts Bins, (2) Steel Cabinets, (1) Lockable Steel Cabinet with Plastic Bins, Brass Fittings, Regulators, Tubing, Electrical Supplies & Components 232 LOT: Wall Racks with Hanging Plastic Bins & Contents of Plumbing Fittings & Brass Fittings 233 LOT: Aeromotive Work Station with Contents, Lifting Rack with Contents of Fire Extinguishers