MINIMUM SWING RADIUS There are times when we may change the content of the catalogue without warning There are times when printed photographs may differ from the retailer's actual specifications Photographs shown above have been taken in poses for use in this catalogue. When exiting machinery, please ensure that operational equipment is always grounded, and that every effort has been made to ensure safety There are times when the color of catalogue photographs may, as a result of the printing process, differ from the actual color Please always ensure that you have read the instruction manual before operating this vehicle A special license (Certification of the completion of a vehicle type construction machinery skilled operator's course) is required to operate construction machinery in excess of 3 tons Operation of specified cranes requires completion of a vehicle type construction machinery skilled operator's course, or completion of a small size mobile crane skilled operator's course
MADE IN JAPAN The world knows that Japanese design and manufacturing is the best especially for industrial products. The hydraulic excavator is not the exception when a total integration concept is required in design work involving key components, manufacturing engineering and product quality assurance in the factory. All SUMITOMO hydraulic excavators are engineered and assembled in SUMITOMO's its one and only factory located in Chiba City, Japan, and distributed to each country in the world. This distinctive feature is unique to SUMITOMO, giving the SUMITOMO machine users total comfort and reliance on product quality. (Note: Some of the items manufactured and sourced in other countries may be assembled in Japan.) 1 2
Minimum Swing Radius In addition to boasting top-class compact rotational capability for cramped areas, outstanding stability, and powerful digging and drive strength have been realized. On various kinds of work-sites it can always be trusted to perform and maneuver exactly as the operator intends. Clearing the Non-road Special Motor Vehicle Exhaust Emission Standard Suction Cooled water release Cooled EGR system Partial utilization Exhaust gas is re-circulated and combustion of exhaust temperature lowered by the EGR (Exhaust Gas Recirculation) engine. In addition, a water-cooled EGR system has been employed, which further efficiently reduces NOx (nitrogen oxide). Exhaust EGR cooler Cooled water intake Control unit system EGR valve Piston Connecting rod Cooled condensed air (flows to the engine) Turbo engine with intercooler Air intake efficiency is improved by the intercooler. It cools air taken in, which has been heated by the compression of the turbo charger. In addition to a great reduction of NOx and PM, high output and improved fuel consumption have been realized. External air Compressed hot air Intercooler Radiator Suction Engine Exhaust Turbo charger digging capacity Arm digging capacity 57kN 39kN Diversified operational field Rotational ABS A rotation shock-absorber device has been installed to soften jolts that occur when the vehicle halts rotation. This is particularly useful for pinpointing position, and preventing spillages during manual operation. Employment of speed assisted mechanics 19mm 23m 7m 178m Precision movement and secure operational control, front and back, with a rounded body-form that minimizes excess width 1235 mm Excess of full rear swing width 51m Road works Forest road works Demolition works Through employing an oil return system in the arm and boom, Width speed assisted operations for digging, as well as fuel consumption, have been improved. Excess cab width Track width Excess rear width 3m 3 4 Minimum front swing radius Tail swing radius
Maintenance Diverse innovations designed to reduce running costs and make maintenance easy. In terms of both cost and labor, you will really come to appreciate its efficiency the longer you use it. Ground Level Access Various parts of the excavator can now be cleaned and changed from ground level without climbing onto the body of the vehicle. Maintenance is no longer troublesome. Ease of cleaning around radiator Oil cooler Inter-cooler Radiator Engine Oil Drain Coupler The engine oil pan is provided with a drain coupler. This makes it easier to do drain work and prevents oil from spattering because of the attached drain hose. Fuel and oil filters The fuel and oil filters are installed in positions that can be accessed from ground level, so replacing them is made simple. Double element air cleaner Condenser Battery (maintenance free) Reserve tank Water separator Fuel filter Oil filter High-Performance Return Filter The hydraulic oil change interval is 5, hours, and the return filter change interval is 2, hours. One high performance return filter keeps the same level of filtering effect as a nephron. The High-Performance Return Filter is made more precisely to condense the Nephron filter function. Hydraulic oil change5, hours Life of filter2, hours The oil and filter change interval depends on the working conditions. Conventional return filter High-performance return filter EMS (Easy Maintenance System) as Standard SUMITOMO's new improved EMS keeps the pins and bushes fully lubricated at all times and prevents rattling. This system significantly extends the service life of the pins and bushes. The interval of greasing around the bucket is 25 hours, and the interval for the other sections is 1, hours, keeping the joints lubricated for a long time and extending the service life of parts by reducing abrasion and rattling. greasing interval 25 hours Greasing interval for other sections1, hours The greasing interval depends on the working conditions. EMS bushing Solid lubricant Dust seal Plated pin High-strength brass Special bushing A solid lubricant embedded in high strength brass forms a layer on the bushing surface to prevent contact between metals, maintaining an excellent lubricated state to reduce the abrasion of joints. The surface of the pin is plated to increase the surface hardness and to improve the wear resistance accordingly. Sections equipped with EMS bushing Precautionary use of EMS Grease is enclosed, however, greasing is necessary every 1 hours or six months depending on the level of dusting conditions. Greasing is also necessary after any components have been submerged underwater for prolonged periods. Greasing is also recommended after use with hydraulic breakers, crushers or other high impact attachments such as rock saws etc. pins should be cleaned thoroughly when removing or attaching new buckets. 5 6
Operator Comfort and Safety How safely, and in what level of comfort can the driver carry out daily operations? We have extended every possible care and attention to ensure that both safety and comfort are provided. Comfortable and spacious cab Spacious foot space Air conditioner installed as standard An air conditioner is fitted as standard. Front facing airflow vents and a defrosting function allow a pleasant work environment to be maintained. Employment of fluid-mount suspension to reduce fatigue Impacts and vibrations on the cab are effectively absorbed, providing a pleasant and comfortable ride, as well as reducing noise levels inside the cab. Operator fatigue is reduced. Travel pedals are optional equipment Floor design allows easy access to and from cab Slide-door windows Silicon oil AM/FM radio Stereo speakers Full operation-console slide adjustment (Reclining seat) Gate-type lock lever on the operation lever to prevent operational errors Seat slide range 1m Total slide range Operation-console slide range 1m Emergency escape hammer Reversing rear-view mirror Cab roof window Membrane switch Emergency stop switch Defroster/Cup holder 7 8
Lifting Capacity Working Range Dimensions BLADE : UP ARM : ARM SHOE : 45G BUCKET :.28BUCKET We 161* 4.7 Ws 161* 4.7 We 149 4.8 Ws 134 4.8 We 125 5.25 Ws 112 5.25 We 113 5.47 Ws 11 5.47 We 18 5.51 Ws 97 5.51 We 11 5.36 Ws 98 5.36 We 121 5.1 Ws 17 5.1 We 147 4.4 Ws 13 4.4 We 22* 3.41 Ws 196 3.41 136 122 132 118 127 113 123 19 121 17 ARM LENGTH = 1.71 (m) MAXIMUM REACH = 5.52 (m) TIPPING CAPACITY (MARK: ) = 75. (%) HYDRAULIC CAPACITY (MARK:*) = 87. (%) 167* 16* 159* 2.88 167* 16* 159* 2.88 17* 177* 181* 2.56 17* 177* 181* 2.56 19* 223* 299* 418* 1.39 179 223* 299* 418* 1.39 19 286* 426* 2.11 169 267 426* 2.11 18 284 242* 2.2 16 247 242* 2.2 173 272 249* 199* 1.78 153 236 249* 199* 1.78 169 267 391* 269* 1.11 149 232 391* 264*.98 169 268 456* 411* 1.11 149 233 456* 4*.99 255* 352* 388* 1.72 239 352* 388* 1.72 BLADE : UP ARM : LONG ARM SHOE : 45G BUCKET :.22BUCKET We 139* 4.59 Ws 139* 4.59 We 129 5.25 Ws 116 5.25 We 11 5.66 Ws 99 5.66 We 1 5.87 Ws 9 5.87 We 96 5.91 Ws 86 5.91 We 97 5.77 Ws 87 5.77 We 15 5.44 Ws 93 5.44 We 123 4.89 Ws 19 4.89 We 168 4.3 Ws 148 4.3 142 128 138 124 133 119 127 113 122 19 119 16 ARM LENGTH = 2.12 (m) MAXIMUM REACH = 5.92 (m) TIPPING CAPACITY (MARK: ) = 75. (%) HYDRAULIC CAPACITY (MARK:*) = 87. (%) 143* 135* 3.29 143* 135* 3.29 149* 147* 3.3 149* 147* 3.3 17* 192* 227* 2.8 17* 192* 227* 2.8 193 256* 392* 2.3 172 256* 392* 2.3 181 288 3* 2.13 161 251 3* 2.13 173 273 257* 19* 1.69 153 237 257* 19* 1.69 167 265 354* 229* 1.11 148 23 354* 221*.98 166 264 493* 345* 1.11 146 229 477 334*.98 169 268 47* 493* 1.11 149 233 47* 493* 1.11 Standard equipment Hydraulics system High-performance return filter One-touch idle Changeable 2-speed-travel Rotational ABS Safety equipment Rear-view mirror Gate lock lever Emergency escape hammer Seat belt Cab-top headlight Travel alarm Theft prevention dog-chain Boom holding valve Engine emergency stop switch Cab/interior equipment KAB seat Large-size rounded cab Fluid mount Air conditioner Defroster BLADE : DOWN ARM : ARM SHOE : 45G BUCKET :.28BUCKET We 161* 4.7 Ws 161* 4.7 We 156* 4.8 Ws 134 4.8 We 16* 5.25 Ws 112 5.25 We 171* 5.47 Ws 11 5.47 We 183* 5.51 Ws 97 5.51 We 192* 5.36 Ws 98 5.36 We 22* 5.1 Ws 17 5.1 We 212* 4.4 Ws 13 4.4 We 22* 3.41 Ws 196 3.41 173* 122 186* 118 199* 113 27* 19 22* 17 ARM LENGTH = 1.71 (m) MAXIMUM REACH = 5.52 (m) TIPPING CAPACITY (MARK: ) = 75. (%) HYDRAULIC CAPACITY (MARK:*) = 87. (%) 167* 16* 159* 2.88 167* 16* 159* 2.88 17* 177* 181* 2.56 17* 177* 181* 2.56 19* 223* 299* 318* 1.86 179 223* 299* 418* 1.39 219* 286* 426* 2.11 169 267 426* 2.11 246* 34* 242* 2.2 16 247 242* 2.2 263* 362* 249* 214* 1.86 153 236 249* 199* 1.78 263* 357* 391* 359* 1.86 149 232 391* 264*.98 241* 325* 456* 481* 1.86 149 233 456* 4*.99 255* 352* 37* 1.86 239 352* 388* 1.72 WE : OVER END WS : OVER SIDE WE : OVER END WS : OVER SIDE BLADE : DOWN ARM : LONG ARM SHOE : 45G BUCKET :.22BUCKET We 139* 4.59 Ws 139* 4.59 We 135* 5.25 Ws 116 5.25 We 137* 5.66 Ws 99 5.66 We 145* 5.87 Ws 9 5.87 We 159* 5.91 Ws 86 5.91 We 174* 5.77 Ws 87 5.77 We 183* 5.44 Ws 93 5.44 We 194* 4.89 Ws 19 4.89 We 24* 4.3 Ws 148 4.3 15* 128 159* 124 174* 119 19* 113 22* 19 24* 16 ARM LENGTH = 2.12 (m) MAXIMUM REACH = 5.92 (m) TIPPING CAPACITY (MARK: ) = 75. (%) HYDRAULIC CAPACITY (MARK:*) = 87. (%) 143* 135* 3.29 143* 135* 3.29 149* 147* 3.3 149* 147* 3.3 17* 192* 227* 2.8 17* 192* 227* 2.8 21* 256* 392* 2.3 172 256* 392* 2.3 233* 318* 3* 2.13 161 251 3* 2.13 255* 353* 257* 222* 1.86 153 237 257* 19* 1.69 262* 359* 354* 323* 1.86 148 23 354* 221*.98 25* 339* 493* 461* 1.86 146 229 477 334*.98 26* 288* 47* 431* 1.86 149 233 47* 493* 1.11 WE : OVER END WS : OVER SIDE WE : OVER END WS : OVER SIDE Automatic lock for front facing window Automatic point wiper connecter Intermittent wiper with washer Reclining seat Cup holder Ashtray Room lamp Hat hook AM/FM Radio Others Engine that complies with tear-3 exhaust emissions regulations EMS (Easy Maintenance System) Long life hydraulic fluid Front-face protective net for radiator Aluminum radiator Aluminum oil cooler Tool kit Grease gun Fuel filter Double-element air cleaner Optional equipment Quick change 4way (Kit) Travel pedal 9 1 Arm length Working Range A Max. digging radius B Max. digging depth C Max. digging height D Max. dumping height E Max. vertical wall cut depth F Min. front swing radius G Rear end swing radius H Max. lift above ground I Min. drop below ground Principal specifications Engine Hydraulic System Performance Others Arm length capacity (ISO heaped) Std. Operating weight Make & model Rated output Displacement Main pump Max pressure Travel motor Parking brake type Swing motor Travel speed Drawbar pull Grade ability Ground pressure Swing speed Arm Fuel tank Hydraulic fluid tank Weight & Ground pressure Model Shoe type Triple grouser shoe 1.7 6 41m 73m 52m 36m 178m 123m 41m 2m 2.1 69mm 4 76m 5 28m Specifications 1.7.28m 3 792kg ISUZU AU-4LE2X 4.kw/in -1 2179ml(cc) 2 variable displacement axial piston pumps 29.4Mpa Variable displacement axial piston motor Mechanical disc brake Fixed displacement axial piston motor 5.1/3.3km/h 59kN 7% <35> 35kPa 9.in -1 57kN 38kN 1liter 97liter Shoe width 4m 6mm Arm length Dimensions A Overall length B Length from center of machine (to arm top) C Length from center of machine (to shoe top) D Center to center of wheels E Overall track length F Overall height G Clearance height under upper structure H Shoe lug height I Cab height J Upper structure overall width K Width from center of machine (left side) L Width from center of machine (right side) M Track gauge N Overall track width with 4m 6mm O Std. Shoe width P Minimum ground clearance Q Width of blade R Height of blade Overall width 23m 247mm Model capacity (ISO/SAE/PCSA heaped).1 3 capacity (CECE heaped) type No. of tooth. 3 3 Width Weight With side cutter Without side cutter 1.7 arm 2.1 arm - 37mm 136kg 1.7 591m 449m 29mm.17m 3.1 3 3-48mm 161kg 142m 2 284m 74m m 27mm 222m 16m 116mm 187mm 23m 247mm 4m 36mm 23m 4m.2 3.19m 3 4 67m 6mm 178kg Suitable for materials with density up to 2kg/m 3 or less Standard bucket (Suitable for materials with density up to 18kg/m 3 or less) Suitable for materials with density up to 16kg/m 3 or less Suitable for materials with density up to 12kg/m 3 or less Not available Operating weight 792kg 83kg 2.1 59m 4487mm 29m.28m 3.2 3 4 8m 7m 24kg Ground pressure 35kPa 27kPa.3 3. 3 4 94m 86m 227kg