MEYCO ME3 Concrete Spraying Mobile for medium sized tunnels
VERSATILE CONCRETE SPRAYING APPLICATION EXPERTISE UNIFIED FOR HIGH QUALITY, ECONOMICAL AND SAFE APPLICATION OF SPRAYED CONCRETE. MAIN BENEFITS Optimal sprayed concrete quality by providing a homogeneous mixture of concrete, accelerator and compressed air Supreme productivity thanks to improved pumping efficiency and accurate boom operation High Safety standard by prevention of under dosage of accelerator and fail safe conveying system Container for liquid accelerator Meyco Mezza sturdy telescopic boom with play free slide system Large diameter concrete conveying system Low pulsation dosing system optimized for alkali free liquid accelerators Control panel and Radio Remote control 2
Large onboard compressor for high compaction of sprayed concrete. Single point control panel for all functions and operation overview. Robust nozzle system with built in safety feature and easy cleaning. Water hose reel for scaling Spraying head Electric cable reel Suprema wet spraying pump with S-tube Sturdy carrier with single-wheel drive including crabwalk Diesel engine Large onboard compressor 3
MEYCO ME3 PLUG AND SPRAY MINIMIZED START UP TIME FOR HIGH PRODUCTIVE CONCRETE SPRAYING. + CONCRETE QUALITY Highly accurate dosing system for liquid accelerators with constant adjustment of volume including flow meter and rotor/stator-pump. Suprema double piston pump with superfast switch-over for minimum pulsation and air compressor with optimized capacity. The recipe for high quality sprayed concrete. + PRODUCTIVITY Data logging of production data and system messages, selectable user profiles for machine parameter settings. Integrated diagnostics, redundant control panel, intuitive operator interface and functions, easy wear parts access and live adjustment of accelerator dosage - the requirement for supreme productivity. + SAFETY Automatic pressure relieve of blocked concrete lines, prevention of under dosage, hopper screen activated emergency stop and safe operator environment for tramming. Because we care about people. ATLAS COPCO SERVICE - IT S NOT JUST ABOUT OUR PROMISES, IT S + WORLD CLASS SERVICE ABOUT DELIVERY FlexiROC T35 and FlexiROC T40 are flexible and versatile tophammer drill rigs, developed and designed for high performance in demanding construction applications. Meyco They ME3 are design also a is very based efficient on common alternative wear for The parts small of and existing medi um MEYCO size quarrying concrete spraying jobs. Even in tough machines terrain conditions, for reduced utilization stock requirements. of the rig is high, thanks to the long reach of the boom, FlexiROC T35 and FlexiROC T40 are flexible and versatile tophammer drill rigs, developed and designed for high performance in demanding 4
TECHNICAL SPECIFICATIONS = STANDARD = OPTION CONCRETE SPRAYING PUMP Meyco SE20 double piston pump with superfast switch-over system 20 m 3 /h at 50 bar Automatic reverse function for pressure relief Manual central lubrication for pump unit Feeding hopper 250 l at 1300 mm height Low profile feeding hopper 180l at 1160 mm height Pump cylinder diameter 150 mm with 600 mm stroke BOOM SYSTEM Mezza telescopic boom with slide system and proportional hydr. valves Manual central lubrication for boom Automatic central lubrication system for boom and pump Spraying head movement 120/360 Nozzle nutation (rotation) 8 Max height 9.5 m (incl. 1.5 m spraying distance) Max width 16 m (8 m each side incl. 1.5 m spraying distance) Working lights LED 24 V, 4x 50 W DOSING SYSTEM Flow meter (system accuracy ± 2%) Rotor/stator-pump max 24 l/min at 10 bar Auto-stop for accelerator under dosage and dry run protection SPRAYING SYSTEM Conveying and nozzle system diameter 100/65 mm CONTROL SYSTEM PLC control system with touch screen User profile machine parameter management and integrated diagnostics Data logging for production data and system messages Radio remote control with back-up cable Control box stainless steel Heater for control box and user panel Sensor for concrete temperature in hopper ELECTRICAL SYSTEM Voltage 3x 400/460 V Frequency 50 or 60 Hz Total installed power without compressor 40 kw Total installed power with compressor 115 kw Conversion Kit 1000 V / 50 Hz Electric motor 37 kw Cable size without compressor 3x 70/35 mm 2 Cable size with compressor 3x 95/50 mm 2 Cable length 80 m Cable reel with hydraulic drive WATER SYSTEM Water tank 160 l Dual water pump 15 l/min at 12/200 bar for cleaning Water hose reel with 15 m high pressure hose and spraying pistol High pressure water pump 150 l/min at 90 bar for low impact scaling Hydraulic driven water hose reel with 100 m 1 1/4 hose AIR SYSTEM Rotary vane compressor 75 kw, 7 bar, 10.5 m 3 /min at 6 bar HYDRAULIC SYSTEM Hydraulic tank 200 l Direct single-wheel drive and steering ±25, including crab,front,4wd, ABS and TCS Diesel engine Deutz 4 cylinder, TD3.6, US EPA Tier 4, EU stage IV Power rating 55.4 kw at 2600 rpm Torque 330 Nm at 1600 rpm Hydrostatic power steering and transmission Central joint oscillation ±15 Open drivers cabin with protective roof, FOPS and ROPS, seat 90 sideways Portable fire extinguisher Fire suppression system Ansul/Fogmaker Hydraulic front stabilizers 2x Hydraulic rear stabilizers 2x 2 Circuit service brakes and SAHR emergency and parking brakes Fuel tank 80 l Electric system 24 V Batteries 2x 12 V, 70 Ah Brake lights Horn and reverse alarm Rearview camera Exhaust catalytic converter Lifting kit Accelerator tank 650 l Heater and insulation for accelerator tank Concrete release agent hand sprayer 5 l Working lights LED 24 V, 2x 50 W Connection for external air supply Toolbox TRAMMING Tramming speed on incline 1:8 7.8 km/h Gradability at max load on good ground 30% WEIGHT Total weight without compressor Total weight DIMENSIONS Width Height Length CARRIER Rims/Tires 13.00/16.00 R20 Spare wheel Tramming lights 4x 70 W Lifting hooks on wheel hubs MISCELLANEOUS Tramming speed on flat ground (rolling resistance 0.05) Ground clearance (with standard tires) 18 km/h 10200 kg 11500 kg 2200 mm 2600 mm 7820 mm 350 mm 5
TECHNICAL SPECIFICATIONS BOOM WORKING RANGE 0 m 4 m 5 m 6 m 7 m 8 m 9 m 10 m 9 m 8 m 7 m R 7 000 6 m 5 m 60 3 000 4 m 25 0 m 0 m 4 m 5 m 6 m 7 m 8 m 9 m Boom working range side view Spraying distance 1 500 0 m 90 R 7 000 4 m 5 m 6 m 7 m 8 m 9 m 0 m 4 m 5 m 6 m 7 m 8 m 9 m Boom working range top view 6
TECHNICAL SPECIFICATIONS 20 18 2 600 DIMENSIONS 3 920 7 800 Transport dimensions and gradability 1 300 30 % Front View Side inclination driving 2 200 Rear View R 68 R 3 50 0 00 Top view turning radius. 7
9851 3463 01 2015-05 Örebro, Sweden. Legal Notice Copyright 2013, Atlas Copco Rock Drills AB, Örebro, Sweden. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information. COMMITTED TO SUSTAINABLE PRODUCTIVITY We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call Sustainable Productivity. www.atlascopco.com