OPERATOR S MANUAL MODELS #CE-760RH / CE-970RH / CE-1260RH SERIES Please read the operator s manual carefully and make sure you understand the instructions fully before using the machine. It is the owner s responsibility to make sure that any person who uses this power cutter has read this manual! CUTTERS EDGE Cutters Edge, Division of Edge Industries, Inc. 3855 23rd Street P.O. Box 846 Baker City, OR 97814 U.S./Canada - 1.800.433.3716 International - (+) 1.541.524.9999 Email - info@cuttersedge.com Web - www.cuttersedge.com EAST COAST SERVICE CENTER Eastern Fire Equipment Services 326 Pleasant View Road New Cumberland, PA 17070 U.S. Phone - 717.412.7746 Email - office@efesinc.com August 2015 Q:\ Good Documents \ Manuals & Products \ CE760/970/1260_Op_Manual IPL
Key To Symbols Edge Industries, Inc., USA 1
Contents 760/970 Model CE-760-RH, CE-970-RH and CE-1260-RH Operations Manual Keys to Symbols... 1 Contents... 2 Overview / Features... 3 Part Locations - Model CE760... 4 Part Locations - Model CE970... 5 Part Locations - Model CE1260... 6 General Safety... 7 Safety Equipment... 8 Cutting Blades... 9-10 Assembling & Adjustments... 11 Fuel Handling... 12-13 Operating... 14-16 Starting & Stopping... 17-20 General Maintenance... 21 Cleaning & Inspection... 22-23 Maintenance - Starter... 24 Maintenance - Air Filter - CE760... 25 Maintenance - Air Filter - CE970 / CE1260... 26 Technical Data - CE760 / CE970... 27 Technical Data - CE1260... 28 Federal Emissions & Warranty... 29 2
Cutters Edge product. Cutters Edge / Husqvarna products. z K&N Air Filters Waterproof with up to 60% more air flow. Cutters Edge WWW.CUTTERS EDGE.COM Reflective Labels Makes it easier to see the saw in dark, smokey conditions. Illuminating Handle (Optional) Glows in the dark. Full Wrap Handle (Optional) Better control in any cutting position. 3
Part Locations 760 Model 1 2 3 4 5 17 16 15 14 13 12 11 24 10 9 8 6 7 23 18 19 20 21 22 25 26 What is what on the CE-760 RH Series Rotary Saw? 1 Front handle 2 Water tap 3 Warning decal 4 Air filter cover 5 Cylinder cover 6 Choke 7 Throttle lockout 8 Throttle control 9 Stop switch 10 Starter handle 11 Starter 12 Muffler 13 Adjustment handle for guard 14 Guard for the blade 15 Decompression valve 16 Air purge 17 Fuel tank 18 Water connection with filter 19 Belt guard 20 Cutting arm 21 Type plate 22 Belt tensioner 23 Cutting head 24 Cutting blade 25 Combination spanner 26 Operator s manual 4
Parts Location 970 Model 15 1 2 3 4 14 16 13 11 6 7 12 10 5 24 17 9 20 8 23 26 18 19 22 21 25 What is what on the CE-970 RH Series Rotary Saw? 1 Front handle 2 Water tap 3 Warning decal 4 Air filter cover 5 Cylinder cover 6 Choke 7 Throttle lockout 8 Throttle control 9 Air purge 10 Stop switch 11 Starter handle 12 Starter 13 Decompression valve 14 Muffler 15 Adjustment handle for guard 16 Guard for the blade 17 Fuel tank 18 Water connection with filter 19 Belt guard 20 Type plate 21 Cutting arm 22 Belt tensioner 23 Cutting head 24 Cutting blade 25 Combination spanner 26 Operator s manual 5
Part Locations 1260 Model 1 2 3 4 5 16 16 15 14 13 12 11 23 10 9 8 6 7 22 17 18 19 20 21 24 25 What is what on the CE-1260 RH Series Rotary Saw? 1 Front handle 2 Water tap 3 Warning decal 4 Air filter cover 5 Cylinder cover 6 Choke 7 Throttle lockout 8 Throttle control 9 Stop switch 10 Starter handle 11 Starter 12 Muffler 13 Adjustment handle for guard 14 Guard for the blade 15 Decompression valve 16 Fuel tank 17 Water connection with filter 18 Belt guard 19 Cutting arm 20 Type plate 21 Belt tensioner 22 Cutting head 23 Cutting blade 24 Combination spanner 25 Operator s manual 6
General Safety When released, the switch should return to the on position. 7
Safety Equipment 8
Cutting Blades blades H 1 Series If you use abrasive blades 9
Cutting Blades De-glazing diamond blades or glazed De-glaze Diamond (If using abrasive blade) Cutters Edge brand diamond blades can be used to cut all materials and can be used in dry or wet cutting situations. 10
Assembling & Adjustments 11
Fuel Handling Cutters Edge 100:1 for Cutters Edge synthetic oil. 50:1 for petroleum based oils. For other brand synthetic oils, follow the manufacturer s instructions for mix ratio. 12
Fuel Handling 13
Operating 14
Operating 15
Operating 16
CE760 RH Starting & Stopping z CE760 RH 1 CE760 RH 1 17
CE970 RH Starting & Stopping z 18
CE1260 RH Starting & Stopping z CE760 RH 1 CE1260 RH 19
Starting & Stopping Push the choke control and push the decompression valve again. The saw is equipped with a momentary contact switch, it will return to the left when released so that it is always in the on position. 20
Maintenance Cutters Edge at what 21
Maintenance 0,5 mm /.020 22
Maintenance z 23
Maintenance 24
Maintenance CE760RH (See next page for CE970RH) on CE760RH NOTE: Early edition CE760RH, CE970RH and CE1260RH Series Saws were equipped with paper air filters and a yellow K&N water proof filter cover. Late 2012 and newer saws are equipped with a reusable K&N filter. At one year maintenance or as needed, replace the paper filter and yellow filter cover with the reusable K&N filter. For CE760RH order part number CE3509 For CE970RH order part number CE3510 When dirty, the reusable filter may be cleaned with warm water and dish soap. Allow filter to dry completely and re-install on saw. 25
Maintenance CE970RH and CE1260RH See previous page for CE760RH. Replacing the air filter on CE970RH NOTE: Early edition CE760RH and CE970RH Series Saws were equipped with paper air filters and a yellow K&N water proof filter cover. Late 2012 and newer saws are equipped with a reusable K&N filter. At one year maintenance or as needed, replace the paper filter and yellow filter cover with the reusable K&N filter. For CE760RH order part number CE3509 For CE970RH order part number CE3510 For CE1260RH order part number CE3510 NOTE: 970 and 1260 Use Same Air Filter When dirty, the reusable filter may be cleaned with warm water and dish soap. Allow filter to dry completely and re-install on saw. 26
CE 760 RH Technical Data CE 970 RH 16 (400 mm) 31.7/14.4 16 (400 mm) 100 4700 27
Technical Data CE 1260 RH 7.2 / 119 2.3 / 60 1.6 / 42 2700 9300 (+/- 150) 5.8 / 9000 SEM CD Champion RCJ6Y/NGK BPMR 7A 0,02/0.5 Walbro WG 9A 2.6 / 1.25 16 (400 mm) 29.9 / 13.6 31.7 / 14.4 16 (400 mm) 100 5400 4700 28
Federal Emission Control Warranty Statement YOUR WARRANTY RIGHTS AND OBLIGATIONS The EPA (The US Environmental Protection Agency), Environment Canada and Edge Industries, Inc. are pleased to explain the emissions control system warranty on your 2009 and later small non road engine. In the U.S. and Canada, new small non road engines must be designed, built and equipped to meet the federal stringent anti-smog standards. Edge Industries, Inc. must warrant the emission control system on your small non road engine for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your unit. Your emission control system includes parts such as the carburetor and the ignition system. Where a warrantable condition exists, Edge Industries, Inc. will repair your small non road engine at no cost to you. Expenses covered under warranty include diagnosis, parts and labor. MANUFACTURER S WARRANTY COVERAGE The 2009 and later small non road engines are warranted for two years. If any emission related part on your engine (as listed above) is defective, the part will be repaired or replaced by Edge Industries, Inc. OWNER S WARRANTY RESPONSIBILITIES As the small non road engine owner, you are responsible for the performance of the required maintenance listed in your Operator s Manual. Edge Industries, Inc. recommends that you retain all receipts covering maintenance on your small non road engine, but Edge Industries, Inc. cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the small non road engine owner you should however be aware that Edge Industries, Inc. may deny you warranty coverage if your small non road engine or a part of it has failed due to abuse, neglect, improper maintenance, unapproved modifications or the use of parts not made or approved by the original equipment manufacturer. You are responsible for presenting your small non road engine to a Edge Industries, Inc. authorized servicing dealer as soon as a problems occurs. The warranty repairs should be completed in a reasonable about of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Edge Industries, Inc., at 1-800-433-3716 or www.cuttersedge.com WARRANTY COMMENCEMENT DATE The warranty period begins on the date small non road engine is delivered. LENGTH OF COVERAGE Edge Industries, Inc. warrants to the initial owner and each subsequent purchaser that the engine is free from defects in materials and workmanship which cause the failure of a warranted part for a period of two years. WHAT IS COVERED Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Edge Industries, Inc. servicing dealer. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Edge Industries, Inc., 1-800-433-3716. WARRANTY PERIOD Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of repair or replace as necessary shall be warranted for 2 years. Any warranted part which is scheduled for replacement as required maintenance shall be warranted for the period of time up to the first scheduled replacement. DIAGNOSIS The owner shall not be charged for diagnostic labor which leads to the determination that a warranted part is defective, if the diagnostic work is performed at an approved Edge Industries, Inc. servicing dealer. CONSEQUENTIAL DAMAGES Edge Industries, Inc. may be liable for damages to other engine components caused by the failure of a warranted part still under warranty. WHAT IS NOT COVERED All failures caused by abuse, neglect or improper maintenance are not covered. ADD ON OR MODIFIED PARTS The use of add-on or modified parts can be grounds for disallowing a warranty claim. Edge Industries, Inc. is not liable to cover failures of warranted parts caused by the use of add-on or modified parts HOW TO FILE A CLAIM If you have any questions regarding you r warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Edge Industries, Inc., 1-800-433-3716. WHERE TO GET WARRANTY SERVICE Warranty services or repairs shall be provided at all Edge Industries, Inc. authorized servicing dealers. MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION- RELATED PARTS Any Edge Industries, Inc. approved replacement part used in the performance of any warranty maintenance or repairs on emissionrelated parts will be provided without charge to the owner if the part is under warranty. EMISSION CONTROL WARRANTY PARTS LIST Carburetor and internal parts Intake pipe, air filter holder and carburetor bolts Air filter and fuel filter covered up to maintenance schedule Ignition system Spark plug, covered up to maintenance schedule Ignition module MAINTENANCE STATEMENT The owner is responsible for the performance of all required maintenance, as defined in the operator s manual. 29
P.O. Box 846 3855 23rd Street Baker City, Oregon 97814 TOLL FREE: 800.433.3716 Telephone: 541.524.9999 Fax: 541.524.9996 Email info@cuttersedge.com East Coast Service Center Eastern Fire Equipment Services 326 Pleasant View Rd. New Cumberland, PA 17070 Tel: 717.412.7746 Email: office@efesinc.com www.cuttersedge.com