Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: RDO Equipment Company Jesse Miller 12500 Dupont Avenue South Burnsville, Minnesota 55337 612.202.6906 800.950.3298 952.890.7046 jmiller@rdoequipment.com www.rdoequipment.com Version of Excel used: 2010 Furnish separate price quote for: 1.0 Articulating Wheel Loader Make & Model Horse Power/Engine Information Operating Weight Full Turn Static Tipping Load Recommended Bucket Type & Size (Stuck/Heaped) (SAE) Is bucket included with base unit? Break Out Force, bucket (SAE) Hinge Pin Height Articulation Angle Brake Type Transmission Type, Describe features Differential type, Front & Rear Seat type Battery CCA Tires Hydraulics Bucket Controls Alternator Size John Deere 644K Net Peak Power at 1,700 rpm 173 kw (232 hp) / John Deere PowerTech PVX 6090 / EPA Interim Tier 4/EU Stage IIIB 18 333 kg (40,417 lb.) 12 879 kg (28,393 lb.) General-Purpose with Bolt-on Edge / Heaped 3.2 m3 (4.25 cu. yd.) / Struck 2.8 m3 (3.7 cu. yd.) No 15 378 kg (33,903 lb.) 4.12 m (13 ft. 6 in.) 80-deg. arc (40-deg. each direction) Service Brakes Hydraulically actuated, inboard sun-shaft mounted, oil cooled, self-adjusting, single disc Parking Brake Automatic spring applied, hydraulically released, driveline mounted, oil cooled, multi disc Countershaft-type PowerShift / Torque Converter Single stage, single phase Shift Control Electronically modulated, adaptive, load and speed dependent Operator Interface Steeringcolumn or joystick-mounted F-N-R and gear-select lever; kick-down button on hydraulic lever Shift Modes Manual/auto (1st D or 2nd D); quickshift button with 2 selectable modes: kick-down or kick-up/down; and 3 adjustable clutch-cutoff settings Shift Modes Manual/auto (1st D or 2nd D); quick-shift Hydraulic locking front with conventional rear Seat with backrest extension, deep foam, vinyl cover, and adjustable air suspension 2 12 volt) 950 CCA (each) 23.5R25 L3 1 Star XHA Michelin Radial Tires w/3 pc Rims Maximum Rated Flow at 6895 kpa (1,000 psi) and 2,350 rpm 310 L/m (82 gpm) 2-function valve, joystick control or fingertip controls, hydraulic-function enable/disable, optional 3rd- and 4th-function valve with auxiliary lever 24 volt with 100-amp Starting Aid Road & Work Lights Ether start aid & engine block heater Halogen driving lights with guards (2) / Front (4) and rear (2) cab work lights 1 Year parts and labor Warranty Details: Months, Years, Hours, etc. 1.01 BASE MACHINE PRICE $ 174,983 1.02 0810 644K Standard Gathering In Base
1.03 1025 644K Standard Waste Handler w/ Hi-Lift Boom * Requires codes: 0810 (1.02) 644K Standard Gathering Group 0914 (3.01) IT4 Engine 1110 (3.03) 4-Speed transmission without Lockup Torque Converter 1520 (3.09) Automatic Reversing Hydraulic Fan 1430 (3.07) Air Intake System with Centrifugal Precleaner 2020 (1.08) High Lift Loader Boom with Grease Pin Joints 3120 (3.14) Manual Axle Differential Lock 5560 (5.15) Less Front Fenders & Rear Platform with Close Mounted Steps 7120 (4.05) Heavy Duty LED Turn Signal & Marker Lights 8422 (2.10) Cab with Air Conditioning * Cannot order code 9125 (4.06) Beacon Bracket $ (5,910) 1.04 1045 644K Standard Waste Handler w/ Hi-Lift Boom 0810 (1.02) 644K Standard Gathering Group 0914 (3.01) IT4 Engine 1110 (3.03)4-Speed transmission without Lockup Torque Converter 1520 (3.09) Automatic Reversing Hydraulic Fan 1430 (3.07) Air Intake System with Centrifugal Precleaner 2010 (1.06) Standard Z-Bar Boom with Grease Pin Joints 3120 (3.14) Manual Axle Differential Lock 5560 (5.15) Less Front Fenders & Rear Platform with Close Mounted Steps 7120 (4.05) Heavy Duty LED Turn Signal & Marker Lights 8422 (2.10) Cab with Air Conditioning * Cannot order code 9125 (4.06) Beacon Bracket $ (4,137) 1.05 1080 Powerllel Forestry Application Package. 2030 (1.10) or 2040 (1.11) Powerllel Linkage 2510 (2.07) Ride Control 5241 (5.08) 750/65R25 L3 Low Profile 1 Star XLD Michelin Radial Tires with 5 pc. Rims 9061 (3.18) or 9063 (3.19) Axle Coolers 9140 (2.16) Fire Extinguisher 9410 (8.02) Transmission Access/Bottom Guards $ 431 1.06 2010 Z-Bar with Standard Greased Pin joints In Base 1.07 2015 Z-Bar with NeverGrease Pin joints. Requires code 1915 (8.08) $ 2,996 1.08 2020 High Lift Loader Boom with Z-Bar (Adds 14.88 inches height to bucket hinge pin fully raided. *Rated tipping load, breakout and lift capacity will be lower than unit equipped with the standard boom.) $ 3,141 1.09 2025 High Lift Loader Boom with Z-Bar and NeverGrease Pin Joints (Adds 14.88 inches height to bucket hinge pin fully raided. *Rated tipping load, breakout and lift capacity will be lower than unit equipped with the standard boom.) $ 6,136 1.10 2030 Powerllel Ordered w/front Attachments. MUST BE ORDERED with code 8556 (7.02) Hi-Vis Coupler. $ 3,052 1.11 2040 Powerllel Ordered w/o Front Attachments. CAN NOT be ordered with code 8556 (7.02) Hi-Vis Coupler or front attachments. $ 3,256 OPERATOR STATION
2.0 Use this section to offer operator station options, number the items starting with 2.1, 2.2, 2.3, etc., until you have listed all operator station options. Use as many numbers as you need. 2.01 2110 Joystick Steering (Provides 2 steering systems with steering wheel and joystick. * Includes code 2210 (2.03) Seat. $ 2,595 2.02 2120 Steering Wheel Only (Requires code 2220 (2.04) or 2230 (2.05) Seat. In Base 2.03 2210 Premium Heated, Leather/Fabric, High-Wide Back with Head Rest Extension, Air Suspension Seat with Left Hand Joystick Steering No Charge 2.04 2220 Air Suspension Seat In Base 2.05 2230 Premium Heated, Leather/Fabric, High-Wide Back with Head Rest Extension, Air Suspension Seat with Conventional Left Arm Rest $ 428 2.06 2240 Standard Vinyl, Back Rest Extension, Air Suspension Seat No Charge 2.07 2510 Ride Control $ 2,505 2.08 2520 Less Ride Control Included 2.09 8419 ROPS Quiet Cab w/ Heater Included 2.1 8422 ROPS Quiet Cab w/ Heater, Air Conditioning $ 3,187 2.11 9105 AM/FM/WB Radio Includes speakers and antenna. (Requires Code 9225 (4.08) Converter. $ 164 2.12 9110 AM/FM/WB Radio w/ CD Player Includes speakers and antenna. (Requires Code 9225 (4.08) Converter. $ 194 2.13 9115 Powered Cab Air Pre-Cleaner $ 489 2.14 8320 Heated Outside Mirrors $ 356 2.15 9130 Rear Camera and Radar Object Detection System. Display shows view behind the machine and provides audible alert. Rear view is displayed in standard LCD color monitor. (Requires Option Code 9225 (4.08). $ 2,352 2.16 9140 5 Lb multi purpose (ABC) Dry Chemical Fire Extinguisher $ 68 2.17 9135 Embedded Payload Scale (Includes calibrations) Can not be used with codes 2050, 2060 or 2030 (1.10), 2040 (1.11) linkages. $ 4,157 2.18 9305 Secondary Steering $ 1,432 ENGINE/POWER TRAIN 3.0 options, number these items starting with 3.01 0914 John Deere power Tech PVX 9.0L Interim Tier 4 Engine In Base 3.02 1120 5-Speed Transmission with Lock-up Torque Converter (Requires code 9050 (3.17) Spin Control) In Base 3.03 1110 4-Speed Transmission $ (1,648) 3.04 1310 Engine Muffler w/flat Black Exhaust Stack In Base 3.05 1330 Engine Muffler w/chrome Exhaust Stack $ 174 3.06 1410 Air Intake System w/o Precleaner Engine In Base 3.07 1430 Air Intake System w/precleaner Engine $ 322 3.08 1510 Standard Fan Drive In Base 3.09 1520 Reverse Fan Drive (Requires 1430 (3.07) $ 721 3.1 1610 Standard Fuel Tank and Line In Base 3.11 3046 Front Hydraulically Locking Differential & Rear Conventional Differential Axles In Base 3.12 3049 High Traction Front & Rear Hydraulically Locking Differential Axles $ 1,166 3.13 3110 Automatic Axle Differential Lock Requires Transmission & Bottom guard code 9410 (8.02). $ 717 3.14 3120 Manual Axle Differential Lock In Base 3.15 9015 Engine Block Heater Included 3.16 9045 Quick Fluid Service w/environmental Drains and Sampling ports. (Coupling system for engine oil, transmission fluid, hydraulic fluid and engine coolant.) $ 234 3.17 9050 Wheel Spin Control System (1st Gear Only) $ 379 3.18 9061 Axle Coolers w/filtration Used w/secondary Steering (Requires code 9305 (2.18) Secondary Steering. $ 1,086 3.19 9063 Axle Coolers w/filtration Used w/o Secondary Steering. Not for use with code 9305 (2.18)Secondary Steering. $ 1,086
ELECTRICAL/LIGHTS 4.0 number these items starting with 4.1, 4.2, 4.3, etc. 4.01 1210 100 Amp Alternator In Base 4.02 1215 130 Amp Alternator for IT4 $ 33 4.03 1700 JDLink Ultimate In Base 4.04 7110 Turn Signal and Marker Lights Included 4.05 7120 Heavy Duty L.E.D. Turn Signal and Marker Lights $ 132 4.06 9125 Beacon Bracket $ 94 4.07 9210 Electrical Corrosion Prevention Level 1 Package (Preventive Corrosion treatment for all electrical & electronic connections) $ 1,096 4.08 9225 24 Volt to 12 Volt-10 Amp Converter $ 108 4.09 AT301703 Amber Strobe Light (Cab roof mounted, gel filled & double flash) $ 611 5.0 TIRES/RIMS Use this section to offer tire/rim options, number these items starting with 5.1, 5.2, 5.3, etc. 5.01 4000 Less Wheels & Tires w/ 9 Degree Axle Stops $ (12,502) 5.02 4010 23.5x25 3 pc. Rims Less Tires $ (9,674) 5.03 4012 750/65R25 5 pc. Rims Less Tires $ (8,579) 5.04 4523 23.5-25 20PR L3 Titan Bias Tires w/3 pc. Rims $ (3,147) 5.05 4621 23.5R25 L3 1 Star XHA Michelin Radial Tires w/3 pc. Rims In Base 5.06 4622 23.5R25 L3 1 Star VMT Bridgestone Radial Tires w/3 pc. Rims $ (1,312) 5.07 4624 23.5R25 L3 1 Star Goodyear Radial Tires with 3 pc. Rims $ (164) 5.08 5241 750/65R25 L3 Low Profile 1 Star XLD Michelin Radial Tires w/5 pc. Rims $ 4,822 5.09 5113 725/70-25 L4 16PR Titan LS150 Logger Tread on 5pc Rims $ 38 5.1 5310 Tire Pressure Monitoring System. Not for use with codes 4000 (5.01), 4010 (5.02), 4011, 4012 (5.03) and 4015. $ 876 5.11 5320 Less Tire Pressure Monitoring System In Base 5.12 5530 Front Fenders In Base 5.13 5540 Full Coverage Front Fenders $ 364 5.14 5550 Full Front and Rear Fenders for Muddy Applications $ 1,734 5.15 5560 Close Mounted Steps w/no Front Fenders or Rear Platform No Charge HYDRAULICS 6.0 Use this section to offer hydraulic options, number these items starting with 6.1, 6.2, 6.3, etc. 6.01 2422 Two Function Joystick w/ FNR Control. Requires code 2120 (2.02) Conventional Steering. In Base 6.02 2424Two Function Joystick w/ Steering Column FNR No Charge 6.03 2426 Two Function 2-Lever Fingertip Control & Steering Column FNR $ 82 6.04 2432 Three Function Joystick w/ FNR & Auxiliary Control Lever for Third Function Includes auxiliary hydraulic lines to boom cross tube. (Requires code 2120 (2.02) Conventional Steering. $ 1,384 6.05 2434 Three Function Joystick w/ Steering Column FNR & Auxiliary Control Lever for Third Function Includes auxiliary hydraulic lines to boom cross tube. $ 1,384 6.06 2436 Three Function 3-Lever Fingertip Control with Steering Column FNR & Auxiliary Control Lever for Third Function Includes auxiliary hydraulic lines to boom cross tube. $ 1,527 6.07 2444 4 Function--4 Lever Finger Tip controls and Steering Column FNR. (1 lever controls boom, 1 lever controls bucket, 2 single levers control 2 additional auxiliary functions. Includes auxiliary hydraulic lines to boom cross tube. $ 2,251 6.08 AT337443 Detent Kit for 3rd Function $ 554 6.09 9310 Hydraulic Control system for Attachment Coupler locking pins(use with Field Kit) $ 729 BUCKET/ATTACHMENTS 7.0 number these items starting with 7.1, 7.2, 7.3, etc. 7.01 8550 Less Bucket w/ Bucket Pins In Base 7.02 8556 Hi-Vis Powerllel Hydraulic Attachment Coupler $ 4,215 7.03 8561 Hi-Vis Z-Bar and High Lift Coupler $ 4,215 7.04 8586 Hi-vis 60" Coupler fork Frame Carriage w/60" Tines. Requires code 8556 (7.02) or 8561(7.03) $ 4,552 7.05 8588 Hi-vis 90" Coupler fork Frame Carriage w/72" Tines. Requires code 8556 (7.02) or 8561(7.03) $ 4,828 7.06 8760 Pin On 4.25 Cu Yd GP Bucket w/ Bolt-On Cutting Edge $ 5,336 7.07 8765 Pin On 4.25 Cu Yd GP Bucket w/ Teeth and Cutting Edge Segments $ 6,032 7.08 8857 4.00 Cu Yd General Purpose Coupler Bucket with Bolt-on Edge $ 5,121 7.09 8859 4.00 Cu Yd General Purpose Coupler Bucket with Teeth and Cutting Edge Segments $ 5,803
OTHER LOADER OPTIONS 8.0 number these items starting with 8.1, 8.2, 8.3, etc. 8.01 Manuals & Filters Included 8.02 9410 Transmission and Bottom Guards with Level 2 Sound Package Included $ 1,214 8.03 9510 Lift Eyes. * Not for use with Code 9305 (2.18), Secondary Steering $ 221 8.04 9520 License Plate Bracket & Light $ 88 8.05 9525 Slow Moving Vehicle Emblem $ 81 8.06 AT398399 644K Waste Handler Package Installed. Includes Rear Access Platforms w/flexible Steps, Hand Holds, and Tie Downs, Axle Seal Guards, Boom Cylinder Hydraulic Line & Cavity Guards, Bucket Cylinder Hydraulic Line/Rod/Sensor Guard, Articulation Joint Guards, Extreme service Flex Cab Entry Step, Extreme Service Transmission Side Guards, Extreme Service Loader Frame Front Cover, Extreme Service Guards for Loader Drive, work, and Turn Lights, Full Frontal Cab Window Guard, Rear Loader Frame Cover, 4th Gear disabled, Lockable Master Electrical disconnect Switch in Cab Floor, Strobe Light Right Rear Cab Roof Mounted, and Lower Boom and Bucket Grease Fitting Guards. $ 22,843 8.07 1910 Steering Cylinder Greased In Base 8.08 1915 NeverGrease Steering Cylinder Joints In Base *Attachment Prices Valid with Purchase of Base Machine. Attachments Ordered Individually Subject to Freight and Installation Charges. ACS Couplers and Attachments 8.09 Pro2000 Series 60 Automatic Male Master - Installed $ 7,589 8.10 Pro1000Series 60 Automatic Male Master - Installed $ 8,100 8.11 Pro2000 Blank Female Adapter Pro-Series 60 for Attachments, Brooms, and Plows (Customer Responsible for Installation) $ 1,943 8.12 Pro1000 Blank Female Adapter Pro-Series 60 for Attachments, Brooms, and Plows (Customer Responsible for Installation) $ 1,986 8.13 4.0 Cu Yd Quick Coupler GP Bucket w/ BOE $ 8,569 8.14 4.0 Cu Yd 4-in-1 Bucket, w/boe (Requires Auxiliary Hydraulics) $ 19,974 8.15 Quick Coupler Standard Construction Duty Forks (Size 60), 18,000 Lbs Capacity, 3"x7"x72" Tines $ 13,359 8.16 Combo Coupler Fee - No Warranty $ 1,190 Falls Attachments & Valve Assemblies - Installed at Little Falls Machine, Inc. 8.18 Transportation of Machine to Little Falls Machine for Installation of Product $ 1,000 Falls Loader-Mounted Snow Wings *Note: Snow Wings with manual elevating push bar require two (2) double acting control valves. *Note: Snow Wings with optional hydraulic elevating push bar extension require one (1) additional double acting control valve. *Note: Falls can provide two different styles for the outer wing lift - specify when ordering. 8.19 LDL-8 8' Front or Rear Loader Mounted Snow Wing - Does Not Include Hydraulics $ 13,130 8.20 LDL-9 9' Front or Rear Loader Mounted Snow Wing - Does Not Include Hydraulics $ 13,301 8.21 LDL-10 10' Front or Rear Loader Mounted Snow Wing - Does Not Include Hydraulics $ 13,552 8.22 LDL-11 11' Front or Rear Loader Mounted Snow Wing - Does Not Include Hydraulics $ 13,772 8.23 LDL-12 12' Front or Rear Loader Mounted Snow Wing - Does Not Include Hydraulics $ 14,019 Options for Loader Mounted Snow Wings 8.24 Trip Edge Option $ 1,158 8.25 Trip Moldboard Option $ 2,002 8.26 Hydraulic Push Bar Assembly w/nitrogen Cushioned Cylinder $ 2,150 8.27 Deduct w/o Factory Installation $ 2,731 Falls Loader-Mounted Power Reversible Snow Plows *Note: All Front-Mount Power Reversible Snow Plows require one (1) double acting control valve. 8.28 PR1143 Power Reversible Trip Blade Snowplow - (11' cutting edge, 43" high, includes pin-on loader arm adapter.) $ 6,617 8.29 PR1243 Power Reversible Trip Blade Snowplow - (12' cutting edge, 43" high, includes pin-on loader arm adapter.) $ 6,917 8.30 PR1155/PR1255 Raise Moldboard Height to 55" (add to respective plow) $ 871 8.31 TER-11 Power Reversible Trip Blade Snowplow -(11' trip cutting edge, 42" high, includes pin-on loader arm adapter.) $ 6,612 8.32 TER12 Power Reversible Trip Blade Snowplow - (12' trip cutting edge, 42" high, includes pin-on loader arm adapter.) $ 6,783 Options for Power Reversible Snow Plows 8.33 Carbide Cutting Edge Per Foot $ 112 8.34 Rubber Belt Snow Deflector (3/8" x 12") $ 283 8.35 Steel Caster Wheel Assemblies $ 1,333 8.36 Pneumatic Caster Wheel Assemblies $ 1,333 8.37 Curb Shoe (Cylindrical) Price Each $ 108 8.38 Curb Shoe (Wrap Around) Price Each $ 135 8.39 Snow-Wheel System (In lieu of standard shoes) $ 2,689 8.40 JRB Adaptable Hooks (Per pair blanks) Installed $ 1,248 8.41 Trip Edge Assembly $ 1,064
Falls Loader-Mounted Heavy Duty Power Reversible Snow Plows *Note: All Front-Mount HD Power Reversible Snow Plows require one (1) double acting control valve. 8.42 HDR-11 Heavy Duty Power Reversible Snow Plow - (11' cutting edge, 48" high, includes pin-on loader arm adapter.) $ 8,457 8.43 HDR12 Heavy Duty Power Reversible Snow - (12' cutting edge, 48" high, includes pin-on loader arm adapter.) $ 8,825 Options for HD Power Reversible Snow Plows 8.44 Carbide Cutting Edge Per Foot $ 112 8.45 Rubber Belt Snow Deflector (3/8" x 12") $ 283 8.46 Moldboard Shoe (Included w/ standard equipment. *Note: Not available w/ trip edge assembly.) No Charge 8.47 Screw-Adjustable Mushroom Shoes (Set of Two (2)) $ 539 8.48 Trip Edge Assembly (One-piece construction.) $ 1,683 8.49 JRB Adaptable Hooks (Per pair blanks) Installed $ 1,248 Falls Loader-Mounted One Way Plow 8.50 411H One Way Snow Plow (12' cutting edge, 36" nose, 66" discharge, includes pin-on loader arm adapter.) $ 6,141 Options for One Way Plow 8.51 Carbide Cutting Edge Per Foot $ 112 8.52 Rubber Belt Snow Deflector (3/8" x 12") $ 283 8.83 Heavy Duty Spring Trip Tilting Bar Assemblies $ 691 8.54 Hydraulic Moldboard Tilt (* Requires additional hydraulic control.) $ 705 8.55 Steel Caster Wheel Assemblies $ 1,333 8.56 Pneumatic Caster Wheel Assemblies $ 1,333 8.57 Left Hand Discharge $ 691 8.58 Snow-Wheel System (In lieu of standard shoes) $ 1,993 8.59 JRB Adaptable Hooks (Per pair blanks) Installed $ 1,248 Falls Loader-Mounted V-Type Snow Plows 8.60 V-890 V-Type Snow Plow (116" cut, 53" nose, 72" discharge, includes pin-on loader arm adapter.) $ 6,648 8.61 V-90 V-Type Snow Plow (116" cut, 60" nose, 84" discharge, includes pin-on loader arm adapter.) $ 6,805 8.62 V-100 V-Type Snow Plow (124" cut, 64" nose, 92" discharge, includes pin-on loader arm adapter.) $ 8,219 Options for V-Type Plows 8.63 Spring-Loaded Steel Snow Deflectors (Std on Falls V-890) $ 431 8.64 Rubber Belt Snow Deflector (3/8" x 12") $ 283 8.65 Snow-Wheel System (In lieu of standard shoes.) $ 4,166 8.66 JRB Adaptable Hooks (Per pair blanks) Installed $ 1,248 Falls Hydraulic Valve Assemblies Purchase third & fourth function joystick controls provided by John Deere on the wheel loader. 8.67 1SGL One Electronic Joystick Control w/one Diverter Valve $ 2,770 8.68 2SGL One Electronic Joystick Control w/two Diverter Valves $ 4,987 8.69 3SGL One Electronic Joystick Control w/three Diverter Valves $ 7,191 Henke Manufacturing Corporation Attachments Henke REL - Heavy Duty Reversible End Loader Snow Plow 8.70 REL10 10' Length, 41" Tall, Tripping, Reversing Blade (*Requires coupler & third function hydraulics) $ 12,979 8.71 REL12 12' Length, 41" Tall, Tripping, Reversing Blade (*Requires coupler & third function hydraulics) $ 13,619 8.72 REL14 14' Length, 41" Tall, Tripping, Reversing Blade (*Requires coupler & third function hydraulics) $ 14,476 8.73 REL16 16' Length, 41" Tall, Tripping, Reversing Blade (*Requires coupler & third function hydraulics) $ 15,725 Options for REL - Heavy Duty Reversible Snow Plow 8.74 Hydraulic Hi-Gate for REL (Includes diverter Kit) $ 6,966 8.75 Install Customer Supplied Coupler (Installation Only) $ 589 8.76 ACS Coupler - Supplied and Installed by Henke Mfg Corp. $ 1,908 8.77 Mushroom Shoes - Pair $ 1,055 8.78 Trip Lockout Option $ 168 Henke SDDB - Severe Duty Dozer Blade 8.79 SDDB10 10' Width, 48" Tall, Non-Tripping, Reversing Dozer Blade (*Requires coupler & third function hydraulics) $ 13,064 8.80 SDDB12 12' Width, 48" Tall, Non-Tripping, Reversing Dozer Blade (*Requires coupler & third function hydraulics) $ 13,343 8.81 SDDB14 14' Width, 48" Tall, Non-Tripping, Reversing Dozer Blade (*Requires coupler & third function hydraulics) $ 13,745 8.82 SDDB16 16' Width, 48" Tall, Non-Tripping, Reversing Dozer Blade (*Requires coupler & third function hydraulics) $ 14,148 Options for SDDB - Severe Duty Dozer Blade 8.83 Install Customer Supplied Coupler (Installation Only) $ 589 8.84 Mushroom Shoes - Pair $ 1,066 Henke FV - Multi-Directional Folding Vee Snowplow 8.85 FV12 12' Length, 47" Tall, Folding Vee Plow, Includes Swivel (*Requires coupler & third & fourth function hydraulics) $ 16,751 8.86 FV14 14' Length, 47" Tall, Folding Vee Plow, Includes Swivel (*Requires coupler & third & fourth function hydraulics) $ 17,954
8.87 FV16 16' Length, 47" Tall, Folding Vee Plow, Includes Swivel (*Requires coupler & third & fourth function hydraulics) $ 18,973 Henke SWL - Snow Wing for Loaders 8.88 SWL10 10' Width for Mid-Mount or Combo - Add to either REL Reversible End Loader Snowplow or FV Folding Vee Snowplow (*Requires coupler & third & fourth function hydraulics) $ 10,917 8.89 SWL12 12' Width for Mid-Mount or Combo - Add to either REL Reversible End Loader Snowplow or FV Folding Vee Snowplow (*Requires coupler & third & fourth function hydraulics) $ 11,099 Options for SWL - Snow Wing for Loaders 8.90 Hydraulic Push Beam (*Requires double acting hydraulic function) $ 1,728 8.91 Torsion Trip Edge $ 1,936 Henke Hydraulic Kits (Assumes 4-Function Loader) 8.92 5th Function Hydraulic Kit $ 3,039 8.93 5th & 6th Functions Hydraulic Kit $ 4,152 JRB Loader Couplers and Attachments 8.94 600HV Hydraulically Actuated Coupler - JRB Installed $ 5,290 8.96 600HVNG Hydraulically Actuated Coupler NeverGrease - JRB Installed $ 6,491 8.97 600HVPowerlell Hydraulically Actuated Coupler Powerlell - JRB Installed $ 5,290 8.98 QC425GPE 4.25 Cu Yd General Purpose Bucket w/boe $ 8,327 8.99 QC600CUF9672M Construction Utility Forks - Manual Tine Adjustment (96" carriage, 72" forks) $ 7,615 8.001 QC600CUF10660M Construction Utility Forks - Manual Tine Adjustment (106" carriage, 60" forks) $ 7,969 8.002 QC600CUF10672M Construction Utility Forks - Manual Tine Adjustment (106" carriage, 72" forks) $ 8,922 8.003 QC600UPF9660M Light Duty/Utility Pallet Forks - Manual Tine Adjustment (96" carriage, 60" forks. For light duty pallet use only.) $ 6,061 9.0 EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 9.1, 9.2, 9.3, etc. (Specify years, miles or hours extended term covers.) 9.01 Price: 9.02 Price: $ $
9.03 Price: 9.04 Price: $ 10.0 DELIVERY STARTING POINT City State Zipcode 10.01 Delivery starting point - City, State, Zip Burnsville, MN 55337 10.02 Delivery starting point - City, State, Zip Grand Forks, ND 58203 10.03 Delivery starting point - City, State, Zip Marshall, MN 56258 10.04 Delivery starting point - City, State, Zip Moorhead, MN 56560 10.05 Delivery starting point - City, State, Zip North Mankato, MN 56003 10.06 Delivery starting point - City, State, Zip Rochester, MN 55901 10.07 Delivery starting point - City, State, Zip Sauk Rapids, MN 56379 10.08 Price per loaded mile Price: $ 4.75 10.09 Minimum delivery charge: $ 350 $ NEW EQUIPMENT RENTAL PROGRAM 11.0 offered, with the option to purchase, list the Hourly Rental Rate: NA Weekly Rental Rate: $ 2,450 Monthly Rental Rate: $ 7,350 Percent (%) of Rental Fee applied to purchase price: 90% If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: NA VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM 12.0 See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 41.50 13.0 HOURLY SHOP RATE $ 108 PER HOUR (Installation services may be requested on an "as needed" basis)