Conveyor Rollers Selection and Usage Guide Four Brands One Source
Off-The-Shelf and On 1.90" BF (Distance Between Frames) BF - 1/4" Dimensions for all standard rollers unless otherwise noted 1/8" nominal 13/16" on rollers with shafts Steel or PVC Rollers Popular Replacement Sizes Readily Available Inventory Easy Ordering and Re-ordering Roller Type Part Number Distance Between Conveyor Frames Part Number Distance Between Conveyor Frames APS12-7.8 7.75 APS12-.3.25 APS12-13 13 APS12-16 16 APS12-18 18 APS12-22 22 PVC Roller with Sleeve Bearings and Round Thru Shaft keeps roller centered on the 1/2 in. round shaft. Sleeve bearing material is long lasting Nyla-Ride. A APS-3.5 3.50 APS-4.8 4.75 APS-7.8 7.75 APS-.3.25 APS-13 13 APS-16 16 APS-18 18 APS-22 22 PVC Roller with Sleeve Bearings Roller body diameter is 1.9 inches. Sleeve bearing material is long lasting Nyla-Ride, designed to be used on 1/2 in. round through shafts. APS7-7.8 7.75 APS7-.3.25 APS7-13 13 APS7-16 16 APS7-18 18 APS7-22 22 PVC Roller with Sleeve Bearings and Hex Thru Shaft keeps roller centered on the 7/16 in. hex shaft. Sleeve bearing material is long lasting Nyla-Ride. B BPS12-3.5 3.50 BPS12-4.8 4.75 BPS12-7.8 7.75 BPS12-.3.25 BPS12-13 13 BPS12-16 16 BPS12-18 18 BPS12-22 22 PVC Roller with Sleeve Bearings Roller body diameter is 1.9 inches. Blind hole sleeve bearing material is long lasting Nyla-Ride and will accommodate Ø1/2 in. stub shafts. D DPL7-7.8 7.75 DPL7-.3.25 DPL7-13 13 DPL7-16 16 DPL7-18 18 DPL7-22 22 PVC Roller with Ball Bearings and Hex Thru Shaft keeps roller centered on the 7/16 in. hex shaft. Ball bearing material is acetal plastic with 420 stainless steel balls. I ICD7-.3.3 ICD7-13 13 ICD7-16 16 ICD7-18 18 ICG7-.3.3 ICG7-13 13 ICG7-16 16 ICG7-18 18 ICD7-22 22 ICD7-24 24 ICD7-28 28 ICG7-22 22 ICG7-24 24 ICG7-28 28 Steel Roller for Driven Systems with Ball Bearings and Hex Thru Shaft keeps roller centered on the 7/16 in. hex shaft. Ball bearing is labyrinth sealed plastic with sealed shielded bearing insert and stainless steel balls. Steel Roller for Gravity Systems with Ball Bearings and Hex Thru Shaft keeps roller centered on the 7/16 in. hex shaft. Ball bearing is labyrinth sealed plastic with a caged bearing insert and stainless steel balls.
-Their Way! These rollers represent our standard product offering. The rollers within each category are the same except for the roller width, which is determined by the distance between the conveyor frames. Highly Suitable Marginally Suitable Not Suitable Call today for your FREE Solus Catalog featuring additional custom rollers and our full line of conveyor components! Chain Width Gravity Conveyors Powered Conveyors Washdown Environments Corrosive Environments Abrasive Environments High Loads General purpose roller with patented Nyla- Ride material sleeve bearing. Excellent for general industrial, belt driven and some inclined gravity applications. Standard sizes for table top conveyor returns. 3.25 4.5 General purpose roller with patented Nyla- Ride material sleeve bearing. Excellent for general industrial, belt driven and some inclined gravity applications. Standard sizes for table top conveyor returns. General purpose roller with patented Nyla- Ride material sleeve bearing. Excellent for general industrial, belt driven and some inclined gravity applications. 3.25 4.5 All plastic, blind bore roller is designed primarily for lighter load, belt driven conveyors and some inclined gravity applications. Uses patented Nyla-Ride material sleeve bearing. General purpose roller with plastic ball bearing, which is designed primarily for gravity conveyors in lighter load applications. Steel rollers sized to replace standard industrial conveyor rollers and are designed for providing optimum performance in harsh manufacturing environments. Steel rollers sized to replace standard industrial conveyor rollers and are designed for providing optimum performance in high load gravity conveyor systems.
The Roller Advantage! Off-The-Shelf Availability Solus maintains a significant inventory of a wide range of roller types and sizes. This inventory is based on the most common sizes of replacement rollers for the most popular, standard industrial roller conveyors from manufacturers such as Hytrol, Rapistan and others. These replacement rollers will likely be smoother running, quieter and longer lasting than the originals. Additionally, other Solus rollers are designed for use as new or replacements for typical conveyor roller returns. They are sized to fit Flexon-System Plast and other conveyor chains and belts. Material Selection The cost effective standard plastic rollers manufactured by Solus are made of a special, proprietary PVC that is sized to exacting standards that ensure uniform thickness, rigidity and strength. The end bearings can be made from a variety of materials and in several configurations. Roller end bearing options include: Sleeve bearings or ball bearings Through hole or blind bore Hex or round shafts Nyla-Ride, Nolu-S, Acetal, or UHMW Labyrinth, sealed, high speed, shielded Other roller materials include: Stainless, Carbon or Galvanized Steel PVC Covered Carbon Steel UHMW Covered Aluminum Urethane Covered Carbon or Stainless Steel Special Applications Because of the wide variety of roller materials as well as the roller end bearing materials and configurations, Solus rollers can be configured to perform in a wide variety of applications. These capabilities include: Reduced Noise. Plastic ball bearings are significantly quieter than steel, and when multiplied by a hundred, or a thousand rollers, can make a significant improvement in working conditions by reducing the overall plant noise level. Abrasive Environments. Combining abrasion resistant plastics over metal cores provides the best of both worlds strength and wear characteristics. Sanitary Requirements. By using FDA approved materials for both the bearing and the roller in combination with a blind bore configuration, rollers can be constructed to minimize contamination areas and improve sanitation. Reduced Operation Costs Solus rollers typically will outperform and outlast regular rollers by a significant margin. This means fewer roller replacements, and less downtime on a conveyor. Down time translates into lost productivity and increased operating costs. Uptime means increased efficiency and reduced operating costs.
The Right Roller Doing The Right Job Available Right Now! Also, see the Solus complete line catalog for additional roller options such as Variations Within a Roller Type A single roller type, type A for instance, can have a variety of lengths and diameters while still using the same bearing configuration. Specialty Rollers: Solus rollers come in a wide variety of configurations. One to fit your special need is just a phone call away. Shaft Types: Choose from hex or round, 1/4 inch to 5/8" diameter, and carbon steel or stainless steel. A selection of stub shafts that bolt against a conveyor frame are also available. End Caps: Used to fill the ends of tubing so that small inexpensive flanged bearings can be used. Bearing Inserts: Typically made from Nyla-Ride material to provide an economical high performance bearing assembly. Hex Adapters: Used to slip over hex shafting so that the outside diameter of the adapter becomes a journal surface on which the bearing in the roller can rotate.
7/16 hex 5/16 hex Shape 1/2 round 5/8 round 1/4 round Shaft Other round Carbon steel Material 304 stainless 316 stainless Through (included) Stub (sold separately) Hex adapter available.81 1.06 1.19 1.31 Diameter 1.66 1.90 2.25 2.38 Roller 2.50 2.88 PVC Aluminum Material UHMW Stainless steel Carbon steel Urethane Tapered With sprocket Grooved Sleeve Type Plug with sleeve Ball Ball, sealed Plastic with metal balls Nyla-Ride Material Nolu-S UHMW Acetal UHMW 5/16 threaded stub shaft included Roller diameter depends on bearing selection 2.0 inches A B C D E F G H I J K L M N P Q S T U V Roller Type Bearing Standard and custom roller options are shown in the chart below. See the Solus catalog for complete details. 30152 Aventura Rancho Santa Margarita, California 92688 phone: (949) 589-3900 fax: (949) 858-0300 Aston, Pennsylvania Indianapolis, Indiana Sanford, North Carolina solusteam@solusii.com www.solusii.com 2003 Solus Industrial Innovations, LLC 8/06 Customer Service: toll free phone: (866) 765-8744 toll free fax: (866) 447-6587 S o l u s i i 4 4 S o l u s