Data sheet: Wilo-VeroLine-IPL 65/ /2

Similar documents
Data sheet: Wilo-VeroLine-IPL 65/ /2

Data sheet: Wilo-VeroLine-IPL 100/ /4

Data sheet: Wilo-VeroTwin-DPL 50/ /4

Data sheet: Wilo-CronoLine-IL 100/250-5,5/4

Data sheet: Wilo-VeroTwin-DPL 40/ /4

Data sheet: Wilo-CronoLine-IL 40/220-1,5/4

Data sheet: Wilo-VeroTwin-DPL 65/ /2

Data sheet: Wilo-CronoTwin-DL 65/250-4/4

Data sheet: Wilo-CronoLine-IL 125/210-5,5/4

Data sheet: Wilo-CronoLine-IL 50/200-1,5/4

Data sheet: Wilo-CronoLine-IL 80/145-1,1/4

Data sheet: Wilo-CronoLine-IL 50/120-2,2/2

Data sheet: Wilo-CronoLine-IL 65/130-4/2

Data sheet: Wilo-CronoLine-IL 65/160-5,5/2

Data sheet: Wilo-VeroLine-IPH-W 65/ /4

Data sheet: Wilo-VeroLine-IP-E 40/130-2,2/2-R1

Data sheet: Wilo-CronoNorm-NL 150/315-37/4

Data sheet: Wilo-CronoLine-IL-E 100/220-5,5/4-R1

Data sheet: Wilo-CronoLine-IL-E 40/170-5,5/2

Data sheet: Wilo-CronoLine-IL-E 65/170-11/2-R1

Data sheet: Wilo-CronoLine-IL-E 100/150-15/2-R1

Data sheet: Wilo-TOP-S 40/10 (1~230 V, PN 6/10)

Data sheet: Wilo-TOP-S 40/4 (1~230 V, PN 6/10)

Data sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)

Data sheet: Wilo-Economy MHI 202 (3~400 V, EPDM)

Data sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)

Data sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)

Data sheet: Wilo-Yonos MAXO 40/0,5-16

Data sheet: Wilo-Yonos PICO 25/

Data sheet: Wilo-Stratos PICO 25/

Data sheet: Wilo-TOP-Z 50/7 (3~400 V, PN 6/10, RG)

Data sheet: Wilo-TOP-Z 30/7 (3~400 V, PN 10, RG)

Data sheet: Wilo-Stratos PICO 25/1-6

Data sheet: Wilo-Stratos-D 50/1-12

Data sheet: Wilo-Stratos-D 32/1-8

Data sheet: Wilo-TOP-Z 30/10 (1~230 V, PN 10, RG)

Data sheet: Wilo-Drain TP 65 F 109/22 (3~400 V)

Data sheet: Wilo-Stratos-Z 25/1-8

Inline Pumps. Product review. Wilo-VeroLine-IPL. Single-head pumps: Single stage inline, flanged, long coupled, mechanical sealed dry rotor pump

Series description: Wilo-Drain STS 40

Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V)

Series description: Wilo-Drain MTC

Series description: Wilo-Stratos ECO-STG

Series description: Wilo-TOP-STGD

Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017

Company name: GRUNDFOS (Singapore) Pte. Ltd. Created by: Angie Ang Phone: Date: 23/03/2017

High Pressure Centrifugal Pumps Product Overview

Series description: Wilo-DrainLift KH 32

Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017

Pressure boosting Single pumps

Heating, air-conditioning, cooling

CR10-07 A-FJ-A-E-HQQE 3x400D 50 HZ

Company name: Created by: Phone:

Company name: Created by: Phone:

CRN15-09 A-P-G-V-HQQV 3x400/ HZ

CRN15-12 A-P-G-E-HQQE 3x400/ HZ

CRI10-14 A-FGJ-I-E-HQQE 3x400D 50 HZ

SINGLE AND DOUBLE IN-LINE PUMPS Heating - Air conditioning - E.C.S.* 50 Hz

SIE BV/ED EVS. SINGLE HEAD PUMPS IN-LINE ELECTRONIC CONTROL Heating - Air conditioning S.H.W. 50 et 60 Hz. operating limits SIE BV/ED

Series description: Wilo-Drain TM/TMW/TMR 32

Series description: Wilo-TOP-S

Company name: Created by: Phone:

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps

CRN5-8 A-P-G-V-HQQV 3x230/400 50HZ

CRI1S-25 A-P-I-E-HQQE 1x220/240 50HZ

LPCD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

CRN1S-21 A-FGJ-G-E-HQQE 3x230/400 50HZ

High pressure centrifugal pumps

MUV. VERTICAL MULTI-STAGE PUMPS 2 pole - 50 Hz APPLICATIONS ADVANTAGES OPERATING RANGES. Certified

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304

CRN1S-30 A-P-G-E-HQQE 1x220/240 50HZ

Series description: Wilo-Sub TWI 6-..-B

Sewage transport Submersible pumps

NK /310A2F1AE-SBAQE

Series description: Wilo-Stratos

CRT 16-4 A-P-A-E-AUUE 4kW 3x400D 50Hz

CRN45-10 A-F-G-V-HQQV 3x400/ HZ

CRT 8-20 A-P-A-E-AUUE 11kW 3x400D 50Hz

MMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

Heating, air-conditioning, cooling

CR45-10 A-F-A-E-HQQE 3x400/ HZ

Series description: Wilo-Drain TM/TMW/TMR 32

LPC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

MTB /183 A-F-A-BQQV 400D-2 11kW

CRE10-12 AN-FJ-A-E-HQQE 3x HZ

CRN45-5 A-F-G-V-HQQV 3x400/ HZ

NB /263 AS-F2-A-BAQE

MMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305

Company name: GSI Created by: Xiao Ying Wong Phone: Date: 10/03/2017 Client: Client Number: Contact:

CR A-F-A-E-HQQE 3x400/ HZ

CR45-5 A-F-A-E-HQQE 3x400/ HZ

CR A-F-A-E-HQQE 3x400/ HZ

Series description: Wilo-MultiCargo MC

Monobloc and Norm Pumps, Axially Split Case Pumps

CR15-10 A-F-A-E-HQQE 11kW 3x400D 50Hz

CM5-11 A-R-G-E-AQQE F-A-A-N

EBARA LPC 4-POLIGA CENTRIFUGALA PUMPAR

IN-LINE NORMALIZED ELECTROPUMPS in cast iron

Data sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design

Transcription:

Data sheet: Wilo-VeroLine-IPL 65/115-1.5/2 Pump curves 2-pole, 5 Hz H[m] 16 14 12 1 8 6 4 2 1 2 3 4 5 2 4 6 8 1 12 14 16 P 2 [kw] 1,6 1,2,8,4 1 2 3 4 5 η p[%] 8 6 Qmin 4 2 1 2 3 4 5 Dimension drawing 8 386,8 II III Wilo-VeroLine-IPL 65/115 IPL 65/115-1,5/2 15 12 1 Ø116 8 6 4 2 6 Q[m³/h] Ø116 Ø116 NPSH [m] Q[l/s] 6 Q[m³/h] 6 Q[m³/h] Approved fluids (other fluids on request) Heating water (in accordance with VDI 235) Water-glycol mixtures (for 2-4 vol.% glycol and fluid temperature 4 C) Cooling and cold water Heat transfer oil Permitted field of application Standard version for operating pressure Special version for operating pressure p max p max Temperature range at max. ambient temperature +4 C Special version at additional charge 1 bar 16 bar -2...+12 C (depending on the fluid) Max. ambient temperature +4 C Installation in closed buildings Outdoor installation Pipe connections Special version at additional charge Nominal flange diameter DN 65 2 x M1 2 II 151 Ø 193 34 17 1 218 118 155 155 Flanges (according to EN 192-2) Flange with pressure-measurement connections Materials PN 1 (PN 16 on request) R 1 / 8 Pump housing EN-GJL-25 Lantern EN-GJL-25 Impeller PPO-GF3 Impeller (special version) Pump shaft Mechanical seal Other mechanical seals 1.421 [AISI42] AQEGG On request Electrical connection Mains connection 3~4 V, 5 Hz Nominal speed n 29 rpm Minimum Efficiency Index (MEI) Minimum Efficiency Index (MEI).4 Masterpumpe zur Ermittlung des MEI- Wertes tbt IPL65/115-1,5/2 Subject to change without prior notice. www.wilo.co.uk 5 Hz 215-2 1 / 8

Data sheet: Wilo-VeroLine-IPL 65/115-1.5/2 Dimension drawing, flange Ø 185 Ø 145 Ø 118 DN 65 Motor/electronics Integrated full motor protection Special version with PTC thermistor sensor (KLF) at additional charge Protection class IP 55 Insulation class F Rated current (approx.) I N 3~4 V 3.3 A 4 x Ø 19 Motor efficiency η m /η 5% m /η 75% m 1% 78.4/8.9/81.3 % Power factor cos φ.78 Nominal motor power P 2 1.5 kw Terminal diagram Motor winding up to 3 kw 23 V Δ/4 V Y, 5 Hz W2 U2 V2 U1 V1 W1 L 2 L 1 L3 PE W2 U2 V2 U1 V1 W1 L 2 L 1 L3 PE : Connection diagram delta connection Y: Connection diagram star connection Motor protection switch required on-site. Check the direction of rotation! To change the direction of rotation, exchange any two phases. P 2 3 kw P 2 4 kw 3~4 V Y 3~23 V 3~69 V Y 3~4 V Motor winding from 4 kw Installation options Pipe installation ( 15 kw motor power) Support-bracket mounting Information for order placements 4 V Δ/69 V Y, 5 Hz Weight approx. m 35 kg Make Wilo After removing the bridges, Y- start is possible. Type VeroLine-IPL 65/115-1.5/2 Art no. 28963 Observe motor name plate data Subject to change without prior notice. www.wilo.co.uk 5 Hz 215-2 2 / 8

Dimensions and dimension drawings: Wilo-VeroLine-IPL 65/115-1.5/2 Dimension drawing 8 386,8 15 II III 151 Ø 193 34 2 x M1 17 155 155 2 II 1 118 4 x Ø 19 218 DN 65 Ø 118 Ø 145 Ø 185 Note: Housing with feet for installation on a base, brackets on request; II Pressure measuring connection R1/8; III Ventilation R1/8 Subject to change without prior notice. www.wilo.co.uk 5 Hz 215-2 3 / 8

Pump curves: Wilo-VeroLine-IPL 65/115-1.5/2 Pump curves 2-pole, 5 Hz H[m] 14 12 Qmin Wilo-VeroLine-IPL 65/115 1 8 IPL 65/115-1,5/2 6 4 Ø115 2 2 4 6 NPSH [m] Q[m³/h] 16 12 8 4 P 2 [kw] 1,2,8,4 5 1 15 2Q[l/s] Ø115 2 4 6 Q[m³/h] η p [%] 6 4 Ø115 2 2 4 6 Q[m³/h] Subject to change without prior notice. www.wilo.co.uk 5 Hz 215-2 4 / 8

Ordering information: Wilo-VeroLine-IPL 65/115-1.5/2 Information for order placements Make Wilo Type VeroLine-IPL 65/115-1.5/2 Art no. 28963 EAN number 41632299741 Colour Green Minimum order quantity 1 Minimum order quantity unit PCE Weight (net) kg 35 Length (net) mm 466.8 Width (net) mm 218 Height (net) mm 34 Weight (gross) kg 35.8 Length (gross) mm 54 Width (gross) mm 38 Height (gross) mm 36 Packaging type Cardboard box Subject to change without prior notice. www.wilo.co.uk 5 Hz 215-2 5 / 8

Specification texts: Wilo-VeroLine-IPL 65/115-1.5/2 Single-stage glanded centrifugal pump with compact in-line design with directly flanged three-phase motor and one-piece shaft or with lantern and standard motor rigidly connected by coupling (N version). The IPL series is suitable for pipe installation or installation on a base. Mounting brackets are available as accessories. With forced-flow circulation, bidirectional bellows mechanical seal and cavitation-reducing plastic impeller. Flange with R 1/8 pressure measuring connections. Pump housing and lantern are cataphoretic-coated. Materials Pump housing: EN-GJL-25 Lantern: EN-GJL-25 Impeller: PPO-GF3 Pump shaft: 1.421 [AISI42] Mechanical seal: AQEGG Permitted field of application Standard version for operating pressure: 1 bar Temperature range at max. ambient temperature +4 C: -2...+12 C (depending on the fluid) Max. ambient temperature: +4 C Pipe connections Nominal flange diameter: DN 65 Flanges (according to EN 192-2): PN 1 (PN 16 on request) Flange with pressure-measurement connections: R 1 / 8 Overall length: 34 mm Minimum Efficiency Index (MEI) Minimum Efficiency Index (MEI):.4 Pump with max. impeller diameter for determining the MEI: IPL65/115-1,5/2 Motor/electronics Protection class: IP 55 Insulation class: F Rated current (approx.): 3.3 A Motor efficiency level: IE2 Motor efficiency: 78.4/8.9/81.3 % Power factor:.78 Nominal motor power: 1.5 kw Nominal speed: 29 rpm Weight Weight approx.: 35 kg Information for order placements Art no.: 28963 Type: VeroLine-IPL 65/115-1.5/2 Subject to change without prior notice. www.wilo.co.uk 5 Hz 215-2 6 / 8

Specification texts: Wilo-VeroLine-IPL 65/115-1.5/2 Make: Wilo Subject to change without prior notice. www.wilo.co.uk 5 Hz 215-2 7 / 8

Terminal diagram : Wilo-VeroLine-IPL 65/115-1.5/2 Terminal diagram W2 U2 V2 U1 V1 W1 W2 U2 V2 U1 V1 W1 : Connection diagram delta connection Y: Connection diagram star connection Motor protection switch required on-site. Check the direction of rotation! To change the direction of rotation, exchange any two phases. P 2 3 kw P 2 4 kw 3~4 V Y 3~23 V 3~69 V Y 3~4 V L 2 L 1 L3 PE L 2 L 1 L3 PE After removing the bridges, Y- start is possible. Subject to change without prior notice. www.wilo.co.uk 5 Hz 215-2 8 / 8