Pneumatic Forklift Trucks

Similar documents
Pneumatic Forklift Trucks

Pneumatic Forklift Trucks. D50S / D60S / D70S-5 & D80S/ D90S-5 G50S / G60S / G70S-5 5,000kg to 9,000kg Capacity

C-G SERIES. Specifications. IC Pneumatic Tire 8,000-12,000 lbs

C-G SERIES. Specifications. IC Cushion Tire 7,000-12,000 lbs

C-G. 8,000-12,000 lb. Capacity IC Pneumatic Tire. Specifications

4 Wheels Electric Forklift Trucks

C-D. 8,000-12,000 lb. Capacity IC Pneumatic Tire. Specifications

Cushion and Pneumatic Forklift Trucks

7 Series Forklifts. Pneumatic Diesel 3.5 to 5.5 ton Series. EPA Tier-4 / Euro Stage 3B. Lifting Your Dreams

Field Proven and Endurance Tested... To Give You the Best Forklift Value on the Market.

Pneumatic Forklift Trucks

4,000-6,500Ib (2,000-3,000kg) Pneumatic Series

Pneumatic Forklift Trucks

Pneumatic Forklift Trucks

LIFT TRUCK TECHNOLOGY. Nexen Libero FGL20-25 (2.0t - 2.5t) LPG Fork Lift. Specification Sheet.

C-5 SERIES. Profile Sheet. IC Pneumatic Tire

F05Series. 5.0ton 7.0ton. at 600mm Load Center. Pneumatic Tire/Engine Powered Models

Building a better future. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 15/18/20L-7M

Electric Powered Forklift ton

Building a better future. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 15/18/20L-7M

EFG 540k S50. Electric Four-Wheel Counterbalanced Trucks (8,000 11,000 lbs.) Broad capacity range for enhanced flexibility

Electric Powered Forklift tonne

20L/25L/30L-7. Dimension. Specification. FORKLIFT TRUCKS Environmentally - Friendly PLEASE CONTACT. Some of the photos may include optional equipment.

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 25LC/30LC-7M 25GC/30GC-7M

PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 15/18/20LC-7M

CX50 Pneumatic. 8,000 thru 11,000 lbs. Capacity. Preliminary Specifications

Forklift Truck. 1.5~2.0 Ton Series Diesel/Gasoline/LPG

25LC/30LC-7A 25GC/30GC-7A

Hyster H40-70FT Lift Truck Dimensions

Pneumatic Forklift Trucks

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 25LC/30LC-7A

Diesel Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. Photo may include optional equipment

Electric Powered Forklift ton

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 60L/70L-7A

Electric Powered Forklifts

EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax

The CLARK GTS is fitted with a powerful and economical diesel engine or LPG engine.

Electric powered forklift tonqh

15LC/18LC/20LCA-7 FORKLIFT TRUCKS Environmentally - Friendly

CPC(Q)D15/18/20/25/30/35T2. T2 series t forklift. EP EQUIPMENT CO.,LTD

Electric Counterbalance Trucks HYUNDAI FORKLIFT

25L/30/33L-7M 25G/30/33G-7M

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Stage IIIB emissionised engine 50/60/70D-7A

15/18/20L(G)-7M. Specification. Dimension. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine PLEASE CONTACT. h10 I2 I e. b12.

Some of the photos may include optional equipment. HYUNDAI LPG/GASOLINE FORKLIFT TRUCKS Applied Tier 4 Engine 25/30/33L-7A

Manufacturer. Manufacturer s type designation. Drive: electric (battery or mains),diesel,petrol,fuel gas,manual

HYUNDAI HEAVY INDUSTRIES

25L/30L-7A 25G/30G-7A

Electric powered forklift ton

EFG 425 S30. Electric Four-Wheel Counterbalanced Trucks (5,000 6,500 lbs.)

25L/30L-7A 25G/30G-7A

RC 5500 SERIES. Profile Sheet Stand-Up Rider Lift Truck

Electric powered forklift tonne

FB & FTB technical specifications

Technical Data for 15/18/20BCS-9

S FT SERIES TECHNICAL GUIDE

FHB technical specifications

MOVING YOU FURTHER HYUNDAI MATERIAL HANDLING

Engine powered forklift ton

4 Wheel Electric Forklift Trucks

4,500 2,000 2,000 9,891 / 1,188 2,779 / 3, x 16 x 12pr x 12 x 12pr 1,140 2, x 150 x 1,220 1, / / 450.

50/60/70D-7A. EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax

Technical specifications

FHB technical specifications

Technical specifications

Performance Enhanced For Stage IV Engine MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. Photo may include optional equipment

Technical specifications

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Applied Tier 3 Engine 50/60/70/80D-7E

50/60/70/80D-7E. The print quality of this copy is not an accurate representation of the original.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES

Electric powered forklift ton

LARGE IC PNEUMATIC SPECIFICATIONS LBS. REACH NEW HEIGHTS CLASS 8FGU FDU60-80 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE

EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax

Specification. Dimension MOVING YOU FURTHER. Mast Specification. Load Capacity. Optional Items HYUNDAI CONSTRUCTION EQUIPMENT.

HYUNDAI HEAVY INDUSTRIES Atlantic Blvd Norcross, GA TEL (678) FAX (678) With Tier4 Final Engine installed

FORKLIFT Excellent MODEL

Some of the photos may include optional equipment. 60/70L-7A

HYUNDAI HEAVY INDUSTRIES

Engine-powered Forklift 2-3ton ( Counterbalanced Type)

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. Electric Counterbalance Trucks. *Photo may include optional equipment.

35/40/45DS-7E 50DA-7E DIESEL FORKLIFT TRUCKS Environmental - Friendly. n Photo may include optional equipment.

hyundai heavy industries

15/18/20BT-7 AC FORKLIFT TRUCKS Environmentally - Friendly

FGC35K-FGC70K 7,000 15,500 LB CAPACITY CUSHION TIRE FORKLIFT

MOVING YOU FURTHER HYUNDAI MATERIAL HANDLING. Electric Counterbalance Trucks Rev. 6 PLEASE CONTACT

FD & FGE technical specifications

1,200 / 1,916. pneumatic PR PR. x2 / Travel speed, unloaded. FOOT Some of the photos may include optional equipment. 6.

Engine powered forklift ton

682 / 1,956. pneumatic PR PR. x2 / Travel speed, unloaded 26.3 / 23.5 NA FOOT power shift 195 /

STANDARD SPECIFICATIONS MAST SPECIFICATIONS & RATED CAPACITIES: ZX-60 & ZX-70

Engine powered forklift ton

HYUNDAI 20B-7 ELECTRIC SEATED 2, ,440 3,300 4,724/576 1,513/1,787. SE 200/ x6-8 2x/ ,780

MID IC PNEUMATIC REACH NEW HEIGHTS

Electric powered forklift ton

HYUNDAI HEAVY INDUSTRIES

Pneumatic Tire Forklift. 15,500 lb capacity LP Diesel models THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS

Hyundai 20DA-7E DIESEL seated 2, ,410 3,116 4,478 / 643 1,200 / 1,916. pneumatic PR PR x2 /

15,500 lb Capacity Diesel Pneumatic Tire Lift Truck

50DF/60DF/70DF-7. Dimension. Specification. HYUNDAI DIESEL FORKLIFT TRUCKS Applied Tier 3 Engine PLEASE CONTACT

Transcription:

TECHNICAL SPECIFICATIONS Pneumatic lift Trucks CD35S / CD40S / CD45S-5 & CD50C / CD55C-5 CG35S /CG40S / CG45S-5 & CG50C / CG55C-5 CGC35S / CGC40S / CGC45S-5 & CGC50C / CGC55C-5 3,500kg to 5,500kg Capacity

3,500/4,000/4,500/5,000 /5,500kg Capacities Engine Powered lift Trucks Pneumatic Tire MAIN VEHICLE SPECIFICATIONS CHARACTERISTICS DIMENSIONS PERFORMANCE WEIGHT CHASSIS POWER TRAIN 2 Model 3 Load Capacity at rated load center kg 4 Load centre 5 Power Elec, Diesel, LPG, Gasoline 6 Operator 7 Tire P:Pnu, E:Solid Soft, C: Cush 8 Wheels (x=driven) Front / Rear 9 Max. with 2-stage mast 10 12 Carriage ISO Class 13 s Length x Width x Thickness Spacing(Min x Max) 14 Tilt of Forward / Backward deg 15 Length to Face 16 Overall Width 17 Overall Dimensions 18 Extended 19 Overhead Guard 20 Seat 21 Turning Radius Minimum outside 22 Load Moment centre 23 Aisle 90 degree stacking(add load length & clearance) 24 Travel Speed Loaded / Unloaded km/h 25 Lifting Speed Loaded / Unloaded /s 26 Lowering Speed Loaded / Unloaded /s 28 Max. drawbar pull Loaded at 1.0 mph (1.6km / h) kg 30 Max. gradeability Loaded at 1.0 mph (1.7km / h) % 32 Total Service Weight, Unloaded kg 33 Loaded, Front / Rear kg Axle Load 34 Unloaded, Front / Rear kg 35 Number of wheels(f / R) 36 Tyres Size, Front 37 Size, Rear 38 Wheel Base Distance 39 Tread Width Front / Rear 40 Loaded at the lowest point Ground Clearance 41 Loaded at centre of wheelbase 42 Service Brakes 43 Parking 45 Battery Voltage / Ampere V/AH 49 Model 50 Engine Rated Power(DIN) HP/rpm kw/rpm 51 Torque kgm/rpm 52 Cylinders / Displacements CC 55 Transmission 57 Hydraulic Pressure Type Number of Speed (Fwd / Rev) System Attachment Note: Specification values quoted in this specification sheet has been rounded. Performance may vary due to operation conditions. Products and specifications are subject to improvement and change without prior notices. bar bar CD35S-5 CD40S-5 CD45S-5 CD50C-5 CD55C-5 3,500 4,000 4,500 5,000 5,500 600 600 600 600 600 Diesel Diesel Diesel Diesel Diesel Driver-seated Driver-seated Driver-seated Driver-seated Driver-seated P P P P P x 2 / 2 x 2 / 2 x 2 / 2 x 2 / 2 x 2 / 2 3,000 3,000 3,000 3,050 3,050 170 170 III III IV IV IV 1,050x150x50 1,050x150x50 1,200x150x50 1,200x150x60 1,200x150x60 310 x 1,182 310 x 1,182 340 x 1,290 340 x 1,290 340 x 1,290 8 / 10 8 / 10 8 / 10 8 / 10 8 / 10 3,100 3,151 3,265 3,300 3,350 1,372 1,451 1,451 1,451 1,451 2,225 2,230 2,230 2,380 2,380 4,265 4,270 4,420 4,470 4,470 2,225 2,230 2,230 2,230 2,230 1,248 1,255 1,255 1,255 1,255 2,770 2,820 2,865 2,930 2,990 561 561 561 571 571 3,331 3,381 3,426 3,501 3,561 24 / 25 24 / 25 24 / 25 24 / 25 24 / 25 520 / 540 520 / 540 520 / 540 470 / 540 470 / 540 480 / 450 480 / 450 480 / 450 490 / 450 490 / 450 3,300 3,300 3,400 3,500 3,600 38 35 32 30 28 5,790 6,180 6,550 7,050 7,390 8,215 / 1,075 8,980 / 1,200 9,800 / 1,250 10,680 / 1,370 11,370 / 1,520 2,685 / 3,105 2,660 / 3,520 2,810 / 3,740 2,890 / 4, 2,800 / 4,590 8.25x15-14 300x15-18 300x15-18 300x15-18 300x15-18 7.00x12-12 7.00x12-12 7.00x12-12 7.00x12-14 7.00x12-14 2,000 2,000 2,100 2,100 2,100 1,138 / 1,115 1,153 / 1,115 1,153 / 1,115 1,153 / 1,115 1,153 / 1,115 205 205 205 205 205 shoe / disc shoe / disc shoe / disc shoe / disc shoe / disc ratchet ratchet ratchet ratchet ratchet 24 / 75 24 / 75 24 / 75 24 / 75 24 / 75 DB58S DB58S DB58S DB58S DB58S 91/ 2,200 91 / 2,200 91 / 2,200 91 / 2,200 91 / 2,200 68 / 2,200 68 / 2,200 68 / 2,200 68 / 2,200 68 / 2,200 33 / 1,600 33 / 1,600 33 / 1,600 33 / 1,600 33 / 1,600 6 / 5,785 6 / 5,785 6 / 5,785 6 / 5,785 6 / 5,785 powershift powershift powershift powershift powershift 190 190 210 210 230 140 140 140 140 140

3,500/4,000/4,500/5,000/5,500 kg Capacities Engine Powered lift Trucks Pneumatic & Cushion Tire CG35S-5 CG40S-5 CG45S-5 CG50C-5 CG55C-5 3,500 4,000 4,500 5,000 5,500 600 600 600 600 600 LPG LPG LPG LPG LPG Driver-seated Driver-seated Driver-seated Driver-seated Driver-seated p p p p P x 2 / 2 x 2 / 2 x 2 / 2 x 2 / 2 x 2 / 2 3,000 3,000 3,000 3,050 3,050 170 170 III III IV IV IV 1,050x150x50 1,050x150x50 1,200x150x50 1,200x150x60 1,200x150x60 310 x 1,182 310 x 1,182 340 x 1,290 340 x 1,290 340 x 1,290 8 / 10 8 / 10 8 / 10 8 / 10 8 / 10 3,100 3,150 3,265 3,300 3,350 1,372 1,451 1,451 1,451 1,451 2,225 2,230 2,230 2,380 2,380 4,265 4,270 4,420 4,470 4,470 2,225 2,230 2,230 2,230 2,230 1,248 1,255 1,255 1,255 1,255 2,770 2,820 2,865 2,930 2,990 561 561 561 571 571 3,331 3,381 3,426 3,501 3,561 20 / 21 19.5 / 20.5 19.5 / 20.5 19.5 / 20.5 19.5 / 20.5 500 / 540 500 / 540 500 / 540 490 / 540 470 / 540 480 / 450 480 / 450 480 / 450 490 / 450 490 / 450 3,355 3,430 3,410 3,410 3,600 36 33.5 30.7 30.7 28 5,790 6,180 6,550 7,050 7,390 8,215 / 1,075 8,980 / 1,200 9,800 / 1,250 10,680 / 1,370 11,370 / 1,520 2,685 / 3,105 2,660 / 3,520 2,810 / 3,740 2,890 / 4, 2,800 / 4,590 8.25x15-14 300x15-18 300x15-18 300x15-18 300x15-18 7.00x12-12 7.00x12-12 7.00x12-12 7.00x12-14 7.00x12-14 2,000 2,000 2,100 2,100 2,100 1,138 / 1,115 1,153 / 1,115 1,153 / 1,115 1,153 / 1,115 1,153 / 1,115 205 205 205 205 205 shoe / disc shoe / disc shoe / disc shoe / disc shoe / disc ratchet ratchet ratchet ratchet ratchet 12 / 75 12 / 75 12 / 75 12 / 75 12 / 75 G643(E) G643(E) G643(E) G643(E) G643(E) 93 / 2,450 93 / 2,450 93 / 2,450 93 / 2,450 93 / 2,450 69 / 2,450 69 / 2,450 69 / 2,450 69 / 2,450 69 / 2,450 31/ 1,400 31/ 1,400 31/ 1,400 31/ 1,400 31/ 1,400 6 / 4,294 6 / 4,294 6 / 4,294 6 / 4,294 6 / 4,294 powershift powershift powershift powershift powershift 190 190 210 210 230 140 140 140 140 140

3,500/4,000/4,500/5,000/5,500 kg Capacities Engine Powered lift Trucks Pneumatic & Cushion Tire CGC35S-5 CGC40S-5 CGC45S-5 CGC50C-5 3,500 4,000 4,500 5,000 500 500 600 600 LPG LPG LPG LPG Driver-seated Driver-seated Driver-seated Driver-seated C C C C x 2 / 2 x 2 / 2 x 2 / 2 x 2 / 2 2,880 2,880 2,880 2,630 III III IV IV 1,220x150x50 1,220x150x50 1,220x150x50 1,220x150x50 310 x 1,082 310 x 1,082 340 x 1,290 340 x 1,290 5 / 6 5 / 6 5 / 6 5 / 6 2,682 2,686 2,828 2,878 1,270 1,270 1,420 1,420 2,135 2,135 2,185 2,185 4,115 4,115 4,315 4,065 2,155 2,155 2,155 2,155 1,125 1,125 1,125 1,125 2,360 2,400 2,530 2,580 505 505 505 515 2,865 2,905 3,035 3,095 18 / 19 18 / 19 21 / 22 21 / 22 500 / 550 480 / 550 480 / 550 450 / 500 530 / 450 500 / 450 500 / 440 480 / 440 2,422 2,346 2,530 2,638 27 24 23 22 5,470 5,850 6,500 6,990 7,970 / 1,000 8,690 / 1, 9,775 / 1,225 10,630 / 1,360 2,230 / 3,240 2,130 / 3,720 2,495 / 4,005 2,520 / 4,470 2 / 2 2 / 2 2 / 2 2 / 2 22x9x16 22x9x16 22x12x16 22x12x16 8x6x12-1 / 8 18x7x12-1 / 8 18x8x12.1 18x8x12.1 1,630 1,630 1,790 1,790 1,042 / 1,044 1,042 / 1,044 1,116 / 1,044 1,116 / 1,044 130 130 130 130 130 130 130 130 foot / hyd foot / hyd foot / hyd foot / hyd hand / mech hand / mech hand / mech hand / mech 12 / 75 12 / 75 12 / 75 12 / 75 G643E G643E G643E G643E 93 / 2,450 93 / 2,450 93 / 2,450 93 / 2,450 69 / 2,450 69 / 2,450 69 / 2,450 69 / 2,450 31/ 1,400 31/ 1,400 31/ 1,400 31/ 1,400 6 / 4,294 6 / 4,294 6 / 4,294 6 / 4,294 powershift powershift powershift powershift 2 / 2 2 / 2 2 / 2 2 / 2 190 210 210 210 140 140 140 140 CGC55C-5 5,500 600 LPG Driver-seated C x 2 / 2 2,630 IV 1,220x150x50 340 x 1,290 5 / 6 3,010 1,420 2,185 4,065 2,155 1,125 2,630 515 3,145 21 / 22 450 / 500 480 / 440 2,696 21 7,340 11,330 / 1,510 2,400 / 4,940 2 / 2 22x12x16 18x8x12.1 1,790 1,116 / 1,044 130 130 foot / hyd hand / mech 12 / G643E 93 / 2,450 69 / 2,450 31 / 1,400 6 / 4,294 powershift 2 / 2 230 140

DIMENSIONAL DRAWING 14 16 37 13 19 18 9 17 21 4 20 23 10 13 22 38 15 MAST SPECIFICATIONS and RATED CAPACITIES CD/CG35S-5 CD,CG35S-5 FWD BWD FWD BWD LC600 LC600 2225 4265 3300 2375 4565 3650 2550 2875 4915 5265 5515 4850 3450 6115 8 8 8 10 3520 3545 2205 1005 8 10 8 10 3660 3660 2090 5265 890 8 8 8 8 3645 3670 2175 5530 975 8 8 8 8 3575 3625 T 4700 5150 2325 2475 5980 6430 1125 1275 8 8 8 8 3465 3485 8 5 8 8 3350 3370 5600 2625 6880 1425 8 3 8 8 3235 3255 6050 2775 7330 1575 8 3 8 5 2820 3165 CD/CG40S-5 CD,CG40S-5 FWD BWD FWD BWD LC600 LC600 2230 4270 3300 2380 4570 3650 2555 2880 4920 5270 3005 5520 4850 3455 6120 8 8 8 10 4025 4045 2210 4255 1010 2090 5270 890 8 8 8 8 4125 4125 2180 5535 980 8 8 8 8 4105 4125 T 4700 5150 2330 2480 5985 6435 1130 1280 8 8 8 8 3965 3990 8 5 8 5 3830 3875 5600 2630 6885 1430 8 3 8 3 3715 3740 6050 2780 7335 1580 8 3 8 3 3485 3440

CD/CG45S-5 CD,CG45S-5 FWD BWD FWD BWD LC600 LC600 2230 4420 3300 2380 4720 3650 2555 2880 5070 5420 3005 5670 4850 3455 6270 8 5 8 10 4480 4295 2210 4400 860 8 10 8 10 4575 4575 2090 5415 740 8 8 8 8 4585 4585 2180 5680 830 8 8 8 8 4565 4585 T 4700 5150 2330 2480 6130 6580 980 1130 8 8 8 8 4400 4450 8 3 8 8 4265 4150 5600 2630 7030 1280 8 3 8 5 4125 3785 6050 2780 7480 1430 8 3 8 3 3280 3280 CD/CG50C-5(COMPACT) T T 2750 2230 4170 170 3050 2380 4470 170 3400 2555 4820 170 3750 2880 5170 170 3005 5420 170 4600 3455 6020 170 2875 2210 4275 870 3875 2090 5290 750 4125 2180 5555 840 4575 2330 6005 990 5025 2480 6455 1140 5475 2630 6905 1290 5925 2780 7355 1440 CD/CG55C-5 (COMPACT) 2750 2230 4170 170 3050 2380 4470 170 3400 2555 4820 170 3750 2880 5170 170 3005 5420 170 4600 3455 6020 170 2875 2210 4275 870 3875 2090 5290 750 4125 2180 5555 840 4575 2330 6005 990 5025 2480 6455 1140 5475 2630 6905 1290 5925 2780 7355 1440 CD,CG50C-5(COMPACT) FWD BWD FWD BWD LC600 LC600 8 8 8 10 5030 4690 8 10 8 10 5035 5035 8 8 8 8 5050 5050 8 8 8 8 5050 5050 8 8 8 8 4935 4980 8 5 8 8 4775 4220 8 3 8 5 4270 3855 8 3 8 5 3330 3005 CD,CG55C-5 (COMPACT) FWD BWD FWD BWD LC600 LC600 8 8 8 10 5400 4900 8 8 8 8 5500 5500 8 8 8 8 5500 5500 8 8 8 8 5500 5500 8 5 8 8 5150 4425 8 3 8 5 4500 4050 8 3 8 5 3500 3125 Crown Equipment Pty Ltd Australia Head office : Corner Long Cooper Streets Smithfield NSW 2164 Australia Tel : +61 2 8788 0000 Fax : +61 2 9609 1702 www.crown.com Copyright 2006 Crown Equipment Corporation Ref : ASF0038 Printed in Australia.