Premix-type Line Burners Page 00-A/P-1 Style A, B & C LINOFLAME Burners S tyle A, B & C LINOFLAME Burners with cast iron ignition rails L INOFLAME Burner Section Description straight section (Code) S tyle "A" S tyle "B" Style "C" LA-(*)-36 LA-(*)-72 LB-(*)-24 LB-(*)-36 LB-(*)-72 LB-(*)-96 LC-(*)-24 C onfigured Item [ 2] LA36 LA72 LB24 LB36 LB72 LB96 LC24 straight section with # 6" straight section 6" straight section with # 8" straight section 8" straight section with # (-3) (-6) (-8) 24110 53802 24117 53806 24135 53818 24133 53817 24132 24155 53827 24153 53826 24152 Size and number of drilled ports for all LINOFLAME Burner sections must be specified on order 24174 53834 9 " straight section (-9) 1 straight section 1 straight section 1 straight section bossed side inlet with # (1-1/ NPT) 1 straight section (1-1/ NPT) bossed side inlet with # 1 straight section bossed back inlet (1-1/ NPT) 1 straight section (1-1/ NPT) bossed back inlet with # straight section bossed back inlet (1" NPT) straight section (1" NPT) bossed back inlet with # 1 tee section side inlet 1 tee section side inlet with # 1 tee section back inlet 1 tee section back inlet with # (-) (-S) (-B) (-3B) (-TS) (-TB) 24109 53801 24116 53805 241 53803 24118 53807 24131 53815 24137 53820 24136 53819 24140 53821 24141 53822 24142 53823 24151 53824 24157 53829 24156 53828 24160 53830 24161 53831 24162 53832 24172 53833 24182 53839 24195 53843 24193 53842 24192 53841 24191 53840 24197 53845 24196 53844 24200 53846 24201 53847 24202 53848 26631 26630 53896 [1] [ 1] Style C LINOFLAME section requires 10mm spark ignitor #18110 [ 2] T o order line burner arrangements, o rder the appropriate configured item number. To order burner sections loose, order individual burner section assembly numbers. 4/11
Page 00-A/P-2 Premix-type Line Burners Style A, B & C LINOFLAME Burners S tyle A, B & C LINOFLAME Burners with cast iron ignition rails L INOFLAME Burner Section Description Bottom & Side Inlet Flange for (-TS) & (-TB) sections Inlet Flange (Code) S tyle "A" S tyle "B" Style "C" LA36 LA72 LB24 LB36 LB72 LB96 LC24 1-1/4" NPT 1-1/4" -LFC 04916 1-1/ NPT 1-1/ -LFE 03917 NPT 2 " -LFE 03433 1 cross ignition section (-TX) 3 " elbow section (-E3) 6 " elbow section (-E6) 24143 24144 24148 24163 24164 24168 24203 24204 24208 midget section L M-3-72 [ 1] 26635 1-1/ NPT L FB- 1-1/ 10519 2 " NPT L FB- 042 2-1/ NPT L FB- 2-1/ 18694 3 " NPT L FB- 00295 B to C reducing section LBC-3 Division plate (plain) plate (flame rod) plate cross ignition Universal plate support bracket (order in pairs) rod holder LEP LEP-FR LXEP LDP 24170 01860 16680 24115 03921 (1) 24170 U SB 23577 (CS) / 39940 (SS) 2LFBR 16309 rod L= 7-1/8" (with cover) 1037594 [1] Suggested drilling for LM-3-72 is #44 mains and #44 ignitors (maximum ignitor port drill size is #44) 05400 (1) 26634 Size and number of drilled ports for all LINOFLAME Burner sections must be specified on order
Premix-type Line Burners Page 00-A/P-3 Style A, B & C LINOFLAME Burners S tyle A, B & C LINOFLAME Burners with alloy ignition rails LINOFLAME Burner Description straight section Section (Code) S tyle "A" S tyle "B" Style "C" LAA-(*)-36 LAA-(*)-72 LBA-(*)-24 LBA-(*)-36 LBA-(*)-72 LBA-(*)-96 LCA-(*)-24 C onfigured Item No. [ 1] LAA36 LAA72 LBA24 LBA36 LBA72 LBA96 LCA24 straight section with # 6" straight section 6" straight section with # 8" straight section 8" straight section with # (-3) (-6) (-8) 241 53809 248 53813 24213 53852 24211 53851 24210 53850 24232 53860 24230 53859 24229 53858 24252 53868 24250 53867 9 " straight section (-9) 1 straight section 1 straight section with # 1 straight section (1-1/ NPT) bossed side inlet 1 straight section (1-1/ NPT) bossed side inlet with # 1 straight section (1-1/ NPT) bossed back inlet 1 straight section (1-1/ NPT) bossed back inlet with # straight section (1" NPT) bossed back inlet straight section (1" NPT) bossed back inlet with # 1 tee section side inlet 1 tee section side inlet with # 1 tee section back inlet 1 tee section back inlet with # (-) (-S) (-B) (-3B) (-TS) (-TB) 240 53808 247 538 243 53810 249 53814 24209 53849 24215 53853 24214 53804 24218 53854 24219 53855 24220 53856 24228 53857 24234 53862 24233 53861 24237 53863 24238 53864 24239 53865 24248 53866 24259 53873 24271 53877 24269 53876 24268 53875 24267 53874 24273 53879 24272 53878 24276 53880 24277 53881 24278 53882 [ 1] To order line burner arrangements, o rder the appropriate configured item number. To order burner sections loose, order individual burner section assembly numbers. 26633 26632 Size and number of drilled ports for all LINOFLAME Burner sections must be specified on order 4/11
Page 00-A/P-4 Premix-type Line Burners Style A, B & C LINOFLAME Burners S tyle A, B & C LINOFLAME Burners with alloy ignition rails L INOFLAME Burner Section Description Bottom & Side Inlet Flange Set for (-TS) & (-TB) sections Inlet Flange Set (Code) S tyle "A" S tyle "B" Style "C" LAA36 LAA72 LBA24 LBA36 LBA72 LBA96 LCA24 1-1/ NPT L FB- 1-1/ 10519 2 " NPT L FB- 042 2-1/ NPT L FB- 2-1/ 18694 3 " NPT L FB- 00295 1-1/4" NPT 1-1/4" -LFC 04916 1-1/ NPT 1-1/ -LFE 03917 NPT 2 " -LFE 03433 1 cross ignition section (-TX) 3 " elbow section (-E3) 6 " elbow section (-E6) Division plate (plain) plate (flame rod) plate cross ignition plate Universal support bracket (order in pairs) rod holder LEP LEP-FR LXAEP LDP 244 24130 24221 24222 24226 01860 16680 246 03921 (1) 24240 24241 24245 USB 23577 2LFBR 16309 Pilot mounting bracket 06950 (1) rod L= 7-1/8" 18117 (unsealed) or 1104615 (sealed) Size and number of drilled ports for all LINOFLAME Burner sections must be specified on order 24279 24280 24284 05400 (1) 26634
Premix-type Line Burners Page 00-A/P-5 Style A, B & C LINOFLAME Burners Spare Parts -mounted LINOPAK Pilots f or Style A, B & C LINOFLAME Burners Pilot Assembly 15214 15216 15218 15220 15215 15219 Pilot Description Inert air LINOPAK pilot Fresh air LINOPAK pilot Fresh air LINOPAK pilot (w/vane) Inert air LINOPAK pilot (w/vane) Pressure type LINOPAK pilot Pressure type LINOPAK pilot (w/vane) Pilot Assembly Includes: Pilot Mixer Gas Adjustable Orifice Cock 33107 15726 326 39294 33107 15726 11680 38579 Miscellaneous Optional Accessories Spark Ignitor 18mm spark ignitor (R) 10mm spark ignitor (R) 18110 Electrode cover for flame rod or spark ignitor (A) 18722 Side-mounted pilots f or Style A, B & C LINOFLAME Burners Pilot Assembly 05140 1115402 150 1115281 06868 06969 18886 18887 Pilot Description Fresh air type L INOFLAME pilot Fresh air type (with vane) Recirculating (with vane) type Pressure type pilot (with vane) Open port venturi pilot Pilot Assembly Includes: Pilot Mixer Gas Adjustable Orifice Cock 326 39294 33107 15726 11680 38579 457 39294 18885 39295 Spark Ignitor 18110 18110 Miscellaneous Optional Accessories S tyle B Only ( threaded flanges) 1 (1.5" NPT bossed side inlet) straight section 1 (1.5" NPT bossed side inlet) straight section w/ SI 1 (1.5" NPT bossed back inlet) straight section 1 (1.5" NPT bossed back inlet) straight section w/ SI (1" NPT bossed back inlet) straight section (1" NPT bossed back inlet) straight section w/ SI 24 36 72 96 38304 24806 34246 38304 34806 34246 38303 24805 34245 383030 24805 34245 38299 38300 38301 38302 38299 38300 38301 38302 4/11
Page 00-A/P-6 Premix-type Line Burners V F LINOFLAME Burner Sections Item Burner Sections VF LINOFLAME Burners C onfigured Item [ 1] VF H Section Descriptio n VF V FH LINOFLAME FL LINOFLAME Assembly L V Assembly 1 straight V FH- 34299 V FL- 34291 Back Inlet Feed Sections 1 x 1 back inlet cross V FH-XB 34304 (24) V FL-XB 34296 (15) (each requires an inlet flange from below) 1 back inlet straight V FH-B 34300 (17) V FL-B 34292 ANS Back Inlet Flange Options Back Inlet Flange Option Cap Sets Plate Sets ANS Inlet Flange Options Inlet Flange Options For (B) back inlet sections For (XB) back inlet cross sections For (B) back inlet sections For (XB) back inlet sections cap set-plain cap set with provision for flame #18117 flame rod closure set spark ignitor) NPT V FL-2BF 34333 (1) NPT V FH-3BF 34338 NPT V FH-3XF 34339 V FL-3XF 34334 4" NPT V FH-4XF 34340 VFL-2BF 24531 VFH-3BF 21049 VFH-3XF 21048 VFL-3XF 24532 4" VFH-4XF 21046 rod (order with spark ignitor (includes #18110 High recirculation end plate (use with end cap set or end inlet flange set) Expansion end plate set (includes end closures with necessary expansion joint fasteners) inlet flange set inlet flange set w/provision for flame rod (order #8117 flame rod flange set w/spark ignitor (includes #23739 spark ignitor) inlet flange set inlet flange set w/provision for flame rod (order #18117 flame rod inlet flange set w/spark ignitor (includes #23739 spark ignitor) V FH-EC 34335 V FL-EC 34330 V FH-EC-FR 34336 V FL-EC-FR 34331 V FH-EC-SI 23993 V FL-EC-SI 24105 VFH-HREP 25079 VFL-HREP 250 V FH-XEP 23190 V FL-XEP 24308 1-1/ NPT V FL-1-1/2-EF 34332 NPT V FH-2-EF 34377 NPT V FH-2EF-FR 24514 NPT V FH-2EF-SI 24515 straight V FH-3 34297 V FL-3 34289 6" straight V FH-6 34298 V FL-6 34290 6" elbow V FL-L 34293 1 x 6" tee V FH-5 34302 (16) V FL-T 34294 1 x 1 cross V FH-X 34303 (20) V FL-X 34295 (15) 1-1/ VFL- 1-1/2 -EF 24530 VFH-2-EF 24534 VFH-2EF-FR 44167 VFH-2EF-SI 44168 [ 1] T o order line burner arrangements, o rder the appropriate configured item number. To order loose items, order individual assembly numbers. [2] A sealed (cannot be disassembled) version of the flame rod, part number 1104615, can also be chosen.
Premix-type Line Burners Page 00-A/P-7 VF LINOFLAME Burners E nd-mounted LINOPAK Pilots for "VF" LINOFLAME Burners Available Natural Gas Pressures Low Gas Pressures (4-7" wc) High Gas Pressures (1-2 PSIG) S election Parameters: "VFH" Type of INOFLAME Pilot Mixer Venturi-type Pressure-type (requires 4-16 osi combustion air) Venturi-type Pressure-type (requires 4-16 osi combustion air) Safeguard Rod UV Scanner Rod L Burner LINOPAK Pilot 23218 VFH-LO-V-FR 23995 VFH-LO-P-UV 22737 VFH-LO-P-FR "VFL" L INOFLAME Burner LINOPAK Pilot 24102 VFL-LO-V-FR 24287 VFL-LO-P-UV 24100 VFL-LO-P-FR Pilot Mixer UV Scanner Rod UV Scanner Rod Fasteners for flanges ordered loose Configured Item Description Back inlet flange for (B) back inlet section 23219 VFH-HI-V-FR 28240 VFH-HI-P-UV 27709 VFH-HI-P-FR NPT 24101 VFL-HI-V-FR 28241 VFL-HI-P-UV 27708 VFL-HI-P-FR Part Pilot Assembly Includes: Adjustable Gas Orifice 23229 11680 38579 23230 25006 38577 VF Qty. H Part Qty. Part 18mm Spark Ignitor VF Qty. L Part NPT 40276 4 NPT 40284 6 40279 4 Qty. Back inlet flange for (XB) back inlet cross section inlet flange set NPT 40292 6 4" NPT 4" 40299 6 1-1/ NPT 1-1/ 40266 4 40019 4 NPT 40281 4 40023 4 Miscellaneous Accessories and/or Replacement Parts rod (L = 4.5") 1061849 Spark ignitor Universal Support Bracket (USB) (normally furnished in pairs) 10mm 18110 14mm 23739 18mm 23577 (CS) 39940 (SS) Rubber cover 18722 4/11
Page 00-A/P-8 Premix-type Line Burners INFRAWAVE Burners I NFRAWAVE Burner Sections Section Type 6" straight sections (I.S.O. assemblies) 1 straight sections (I.S.O. assemblies) Plain N ote: All INFRAWAV E Burner sections use standard (metric) fasteners C onfigured Item [ 1] INFRA SG Description With pilot, includes side-mounted pressure pilot #25906 which includes #11680 pilot mixer, #18110 spark ignitor, #38579 adjustable pilot gas orifice, with provision for mounting a UV scanner With SI and FR, includes side-mounted #23739 spark ignitor, opposite provision for mounting a flame rod (order #18117 flame rod, if used, With SI, of INFRA DG " SG" Single Grid "DG" Double Grid 6 S SG (16) 6 S DG (20) 6 SP SG 6 SP DG (22) 6 SSF DG (21) i ncludes side-mounted #23739 spark ignitor 6 SS SG (16) 6 SS DG (20) With FR-SCAN, includes provision for side-mounting a UV scanner or flame rod (order #18117 flame rod, if used, Plain With pilot, includes side-mounted pressure pilot #25906 which includes #11680 pilot mixer, #18110 spark ignitor, #38579 adjustable pilot gas orifice, with provision for mounting a UV scanner With SI and FR, includes side-mounted #23739 spark ignitor, opposite provision for mounting a flame rod (order #18117 flame rod, if used, With SI, of 6 SFU SG (16) 6 SFU DG (20) S SG (32) S DG (40) SP SG (30) SP DG (37) SSF SG (32) SSF DG (40) i ncludes side-mounted #23739 spark ignitor SS SG (30) SS DG (37) With FR-SCAN, includes provision for side-mounting a UV scanner or flame rod (order #18117 flame rod, if used, [ 1] T o order burner arrangements, order the appropriate configured item number. [2] A sealed (cannot be disassembled) version of the flame rod, part number 1104615, can also be chosen. SFU SG (32) SFU DG (40) Segment Choice Detail - INFRAWAVE Burner sections BAFFLE GRID Segment Name Segment Description Choice of baffle grid Segment Choices (DEFAULT is shaded) HIGH_PROF Segment Choice Description High profile grid L OW_PROF Low profile grid (standard) GRID CLAMP Choice of material for grid clamp SS STD Stainless steel clamp material Standard clamp material BODY GASKET Choice of body gasket NO YES Do not include with order Include with order MAX AIRSTREAM TEMP (F) Choice of maximum airstream temperature 450 450F max airstream temperature 600 600F max airstream temperature
Premix-type Line Burners Page 00-A/P-9 I NFRAWAVE Burner Sections Section Type 6" bottom inlet sections (I.S.O. assemblies) NOTE: Select optional inlet flange set separately from listing on following page 1 bottom inlet sections (I.S.O. assemblies) NOTE: Select optional inlet flange set separately from listing on following page 1 side inlet sections (I.S.O. assemblies) NOTE: Select optional inlet flange set separately from listing on following page Plain INFRAWAVE Burners N ote: All INFRAWAV E Burner sections use standard (metric) fasteners C onfigured Item [ 1] INFRA SG Descriptio n With pilot, includes side-mounted pressure pilot, #25906 which includes #11680 pilot mixer, #18110 spark ignitor, #38579 adjustable pilot gas orifice, with provision for mounting a UV scanner W ith SI and FR, includes side-mounted #23739 spark ignitor, opposite of provision for mounting a flame rod (order #18117 flame rod, if used, With SI, INFRA DG " SG" Single Grid "DG" Double Grid 6 BI SG (15) 6 BI DG (19) 6 BI SP SG (17) 6 BI SP DG (21) 6 BI SSF DG (19) i ncludes side-mounted #23739 spark ignitor 6 BI SS SG (15) 6 BI SS DG (19) With FR-SCAN, includes provision for side-mounting of scanner or flame rod (order #18117 flame rod, if used, Plain a UV With pilot, includes side-mounted pressure pilot, #25906 which includes #11680 pilot mixer, #18110 spark ignitor, #38579 adjustable pilot gas orifice, with provision for mounting a UV scanner W ith SI and FR, includes side-mounted #23739 spark ignitor, opposite of provision for mounting a flame rod (order #18117 flame rod, if used, With SI, 6 BI SFU SG (15) 6 BI SFU DG (19) BI SG (28) BI DG (36) BI SP SG (31) BI SP DG (38) BI SSF SG (29) BI SSF DG (37) i ncludes side-mounted #23739 spark ignitor BI SS SG (28) BI SS DG (36) With FR-SCAN, includes provision for side-mounting of a UV scanner or flame rod (order #18117 flame rod, if used, Plain With pilot, includes side-mounted pressure pilot #25906 which includes #11680 pilot mixer, #18110 spark ignitor, # 38579 adjustable pilot gas orifice, with provision for mounting a UV scanner W ith SI and FR, includes side-mounted #23739 spark ignitor, opposite of provision for mounting a flame rod (order #18117 flame rod, if used, With SI, BI SFU SG (29) BI SFU DG (36) SI SG (28) SI DG (35) SI SP SG (30) SI SP DG (38) SI SSF SG (29) SI SSF DG (36) i ncludes side-mounted #23739 spark ignitor SI SS SG (28) SI SS DG (36) With FR-SCAN, includes provision for side-mounting a UV scanner or flame rod (order #18117 flame rod, if used, SI SFU SG (29) [ 1] T o order burner arrangements, order the appropriate configured item number. [2] A sealed (cannot be disassembled) version of the flame rod, part number 1104615, can also be chosen. SI SFU DG (36) 4/11
Page 00-A/P-10 Premix-type Line Burners INFRAWAVE Burners I NFRAWAVE Burner Plate Sets, Accessory Options and Spare Parts Mounted Pilot Assembly NOTE: Select an end plate set from below to close off the end of the burner assembly Bottom & Side Inlet Flange Sets Bottom & Side Flanges Inlet Flange Inlet Sets Inlet Flanges Closure Sets Miscellaneous Accessory Options and Spare Parts Description mounted pressure pilot and mounting bracket, includes pressure pilot #24922 which includes #11680 pilot mixer, # spark ignitor, #38579 adjustable pilot gas orifice with provision to mount a flame rod (order #18117 flame rod, if used, separately) [1] INFRA SG INFRA DG " SG" single grid "DG" double grid 27405 27404 2 " NPT ( ANS) 27465 3 " NPT ( ANS) 27466 35915 + 54630 32721 + 54630 2 " NPT ( ANS) 27462 3 " NPT ( ANS) 27463 35915 + 54630 + 42534 32721 + 54630 + 40023 plate set - plate set - e nd closur e 27461 b ottom and side closur e 27464 F lame rod ( L - 7-1/8") (A/R) 18117 (unsealed) or 1104615 (sealed) S park Ignitor (R) E lectrode protective cover (A/R) for flame rod or spark ignitor U niversal support bracket (A) USB normally furnished in pairs 10mm 18110 14mm 23739 18mm zinc plated, good up to 750 F stainless steel, good up to 1600 F 18722 23577 39940 F lame rod cooling tee ( A) 27549 R efractory baffle grid (R) Manifold gasket S tandard 1058597 (Low Prof); 1056792 (High Prof) D rilled for pilot 1058598 (Low Prof); 1056793 (High Prof) D rilled for ignitor 1058599 (Low Prof); 1056794 (High Prof) ( R) for field assembly 31796 M anifold gaske t, 6" body (R) 35358 M anifold gaske t, 1 body (R) 35359 # 310SS grid clamp ( R) 28341 # 310SS deflector rail ( R) 28340 D eflector rail, cross ignition ( R) 34329 Maximum airstream temperature: 450 F (rubber boot limit); 600 F (burner limit if up-fired, 400 F if down-fired) [1] A sealed (cannot be disassembled) version of the flame rod, part number 1104615, can also be chosen.