Detention Furniture Engineered to last 20 years to life.
Designed with Durability in Mind PDI s standard and custom specification detention furniture is the cost-effective solution for new construction or retrofits, and environments. Fabricated with hard wearing steel or stainless steel for long-lasting value, PDI furniture is virtually indestructible. Resistance to scratching, dents, and markup withstands years of use and abuse. Stainless steel surfaces are easier to clean and disinfect, helping reduce the spread of germs. Floor bolted or wall mounted versions with multi gauge steel for heavy-duty support ensure secure installation in any environment. Table of Contents Floor Mounted Bunk...1 Floor Mounted Double Bunk...2 Wall Mounted Bunk...3 Dayroom Table...4 Picnic Dayroom Table...5 Dayroom Table...6 Floor Mounted Stool...7 Wall Mounted Fixed Stool...8 Wall Mounted Swing Stool...9 Institutional Desk & Seat...10 Wall Mounted Desk & Seat...11 Wall/Floor Mounted Desk & Seat...12 Floor Mounted Bench...13 Wall Mounted Bench...14 Federal Bench...15 Storage Locker...16 Folding Shower Seat...17
Floor Mounted Bunk bk1000 The BK1000 floor mounted single bunk from PDI provides costeffective, long-term value, and Fabricated with hard-wearing steel for long-lasting value, the BK1000 is Coated with factory primer for finish painting or powder coat finish. Meets CDC requirements. Storage options 10 gauge steel, 2 back flange, 1 hem 2 x 2 x 3/16 steel angle turned up form part of the bunk legs Overall: 31 W x 77 L x 18 H Pan: 301/2 W x 761/2 L 7/16 diameter mounting holes in mounting pads with 3/8 anchors. Anchors not by PDI. BK1001 - Under bunk storage drawers. BK1002 - Under bunk storage shelves. 714.288.1770 sales@pdidet.com pdidet.com Page 1
Floor Mounted Double Bunk bk2000 The BK2000 floor mounted double bunk from PDI provides costeffective, long-term value, and Fabricated with hard-wearing steel for long-lasting value, the BK2000 is virtually indestructible. Resistance to scratching, dents, and markup means withstanding years of use and abuse. Optional holes for bolts or welded mounting installation. Coated with factory primer for finish painting or powder coat finish. Meets CDC requirements. Storage options 10 gauge steel, 2 back flange, 1 hem 2 x 2 x 3/16 steel angle turned up form part of the bunk legs Overall: 31 W x 77 L x 53 H Pan: 301/2 W x 761/2 L 7/16 diameter mounting holes in mounting pads with 3/8 anchors. Anchors not by PDI. BK2001 - Under bunk storage drawers. BK2002 - Under bunk storage shelves. Page 2
Wall Mounted Bunk bk3000 The BK3000 wall mounted bunk from PDI provides cost-effective, long-term value, and Fabricated with hard-wearing steel for long-lasting value, the BK3000 is virtually indestructible. Resistance to scratching, dents, and markup means withstanding years of use and abuse. Optional holes for bolts or welded mounting installation. Coated with factory primer for finish painting or powder coat finish. Meets CDC requirements. Storage options 10 gauge steel, 2 flange, with or without mounting holes Bench top supported by 21/2 schedule 40 steel pipe supports. Intermediate supports provided at 36 on center where bench exceeds 4 length. Overall: 31 W x 77 L x 10 H Pan: 31 W x 765/8 L 9/16 diameter mounting holes in flange for anchor wall mounting or no holes for welded installation. Anchors not by PDI. BK3001 - Under bunk storage drawers. BK3002 - Under bunk storage shelves. 714.288.1770 sales@pdidet.com pdidet.com Page 3
Dayroom Table dt1000 The DT1000 Dayroom table from PDI provides cost-effective, longterm value, and contributes to safer correctional and institutional environments. Fabricated with hard-wearing steel on table top and seats for long-lasting value; the DT1000 is Unified table and seating construction, with floor bolted, fully welded mounting plate to ensure secure installation and heavy-duty support. Health and safety Brushed stainless steel provides an attractive, non-porous surface for easier cleaning and reducing the spread of germs. Versatile The DT1000 is available in either 4, 6, or 8 person seating capacity, and available with optional handicap accessible configuration and has multiple finish options. Maintains healthier environment Table top Seats 12 gauge steel, 2 flange 4 x 4 x 3/16 steel tube post; 11/2 flange 30 H 4 person 5 6 x 5 6 6 person 5 6 x 7 6 8 person 5 6 x 9 6 14 gauge steel 3 x 3 x 3/16 steel tubes 12 D x 18 H Floor mounted with 1/2 anchors. Anchors not by PDI. Page 4 Capacity Finishes 4 person (DT1004). 6 person (DT1006). 8 person (DT1008). Handicap seating. Stainless steel table & seat tops. Stainless steel table top with etched game board.
Picnic Dayroom Table DT2000 The DT2000 loor mounted picnic style dayroom table from PDI provides cost-effective, long-term value, and Fabricated with hard-wearing steel long-lasting value; the DT2000 is Health and safety Brushed stainless steel provides an attractive, non-porous surface for easier cleaning and reducing the spread of germs. Maintains healthier environment Mounting 12 gauge steel table and seat surface 3/16 thick channel leg supports; seat arms are constructed from 3/16 steel channels welded to leg supports 3/8 thick base mounting plates 4 person 4 6 W x 4 L 6 person 4 6 W x 6 L 8 person 4 6 W x 8 L Floor mounted with 1/2 anchors. Anchors not by PDI. Capacity Finish 4 person (DT2004). 6 person (DT2006). 8 person (DT2008). Stainless steel table & seat tops. Stainless steel table top with etched game board. 714.288.1770 sales@pdidet.com pdidet.com Page 5
Dayroom Table DT3000 The round DT3000 Dayroom table from PDI provides costeffective, long-term value, and Fabricated with hard-wearing stainless steel on table top and seats for long-lasting value; the DT3000 is Unified table and seating construction, with floor bolted, fully welded mounting plates ensure secure installation and heavy-duty support. Health and safety Brushed stainless steel provide an attractive, non-porous surface for easier cleaning and reducing the spread of germs. The round shaped table top and seats means no sharp corners, helping prevent and lower risk of serious injuries. Versatile SEATING The DT3000 is available in both 4 or 6 person seating capacity, and available with optional handicap accessible configuration. Costs less than a traditional pedestal style detention table. Maintains healthier environment Tab le top Seats Legs Mounting 12 or 14 gauge stainless steel 10 gauge steel support plate with PEM studs 42 D x 30 H 14 gauge steel 10 gauge steel support plate with PEM studs 12 D x 18 H 14 gauge steel; vertical support with mounting plate for seat top Vertical support with seat mounting plate 21/4 interior floor anchor mounting plate 10 gauge steel seat-top mounting plate 21/2 tube Field assembly required. Seat post bolts to floor and support arm connects to the bottom of the tabletop. Seat is fastened to the seat post. Anchors not by PDI. Capacity 4 person (DT3004). 6 person (DT3006). Configuration Handicap version. Etched checkerboard game top. Page 6
Floor Mounted Stool FS1000 The FS1000 floor mounted stool from PDI provides cost-effective, long-term value, and Fabricated with stainless steel for long-lasting value; the FS1000 is Health and safety Brushed stainless steel provides a smooth, non-porous surface for easier cleaning and reducing the spread of germs. Maintains healthier environment Seat Mounting 14 gauge steel seat top with 11/2 flange 10 gauge back plate; 21/2 schedule 40 steel pipe 1/4 thick base plate with 7/16 diameter mounting holes for installation 12 diameter Floor mounted with 3/8 anchors. Anchors not by PDI. Stainless steel seat top with brushed finish. 714.288.1770 sales@pdidet.com pdidet.com Page 7
Wall Mounted Fixed Stool ws1000 The round WS1000 wall mounted fixed position stool from PDI provides cost-effective, long-term value, and Fabricated with hard-wearing steel long-lasting value; the WS1000 is Health and safety Brushed stainless steel provides an attractive, non-porous surface for easier cleaning and reducing the spread of germs. The round shaped seat means no sharp corners, helping prevent and lower the risk of serious injuries. Maintains healthier environment Seat Mounting Arm 14 gauge steel top; 10 gauge back plate 10 gauge steel 1/4 thick mounting plate 12 diameter, 11/2 flange 2 x 3 x 3/16 rectangular steel tube; 3 x 6 x 3/16 support gusset Field weld to embeds or steel wall panel. Bolt on option available with six 7/16 diameter holes for 3/8 anchors. Anchors not by PDI. Stainless steel seat top with brushed finish. Page 8
Wall Mounted Swing Stool ws2000 The round WS2000 wall mounted stool from PDI provides costeffective, long-term value, and Fabricated with hard-wearing steel for long-lasting value; the WS2000 is Health and safety Brushed stainless steel provides an attractive, non-porous surface for easier cleaning and reducing the spread of germs. The round shaped seats means no sharp corners, helping prevent and lower risk of serious injuries. Space saving Seat Mounting Arm 14 gauge steel top; 10 gauge back plate 10 gauge steel 1/4 thick mounting plate 12 diameter, 11/2 flange 4 x 3/8 thick steel plate Field weld to embeds or steel wall panel. Bolt on option available with six 7/16 diameter holes for 3/8 anchors. Anchors not by PDI. Stainless steel seat top with brushed finish. 714.288.1770 sales@pdidet.com pdidet.com Page 9
Institutional Desk & Seat ds1000 The DS1000 wall and floor mounted desk and seat from PDI provides cost-effective, long-term value, and Fabricated with hard-wearing steel on table top and seats for long-lasting value, the DS1000 is Unified desk with two open shelves, and swing seat are wall and floor bolted, with fully welded mounting plates to ensure secure installation and heavy-duty support. Space saving swing seat DESK Seat 12 gauge steel surface with 11/2 flange; 10 gauge steel sides and back panels; 10 gauge steel shelves Gussets with four anchor holes 16 D x 36 W x 30 H 10 gauge steel, 11/2 flange 21/2 diameter, 14 gauge wall steel round tube with mounting plate for seat top. Fully welded support arm is formed upward to fasten to desk top with mounting plate. 1/4 thick interior mounting plate for floor anchors. 12 diameter 3/16 mounting pads at each corner of desk. Mounting pads provided at each corner with 7/16 diameter holes for floor mounting with 3/8 anchors. Anchors not by PDI. Polished stainless steel desk and seat top. Powder coat. Page 10
Wall Mounted Desk & Seat DS2000 The DS2000 wall mounted desk and seat from PDI provides costeffective, long-term value, and Fabricated with hard-wearing steel on table top and seats for long-lasting value; the DS2000 is Coated with factory primer or powder coat for finish painting. Space saving DESK Seat 10 gauge steel, fully welded seams gussets with four anchor holes 18 W x 18 D x 6 H 14 gauge steel, 11/2 flange 12 W x 18 D x 6 H Can be field welded to steel embeds/wall panels, or anchor bolted to wall. Holes provided for anchor bolts. 714.288.1770 sales@pdidet.com pdidet.com Page 11
Wall/Floor Mounted Desk & Seat ds3000 The DS3000 wall and floor mounted desk and seat from PDI provides cost-effective, long-term value, and Fabricated with hard-wearing steel on table top and seat top for long-lasting value; the DS3000 is Unified table and seating construction, with floor bolted, fully welded mounting plate to ensure secure installation and heavy-duty support. DESK Seat 10 gauge steel, 4 back flange Gussets with four anchor holes 24 W x 18 D x 4 H 14 gauge steel, 11/2 flange 21/2 diameter, 14 gauge wall steel round tube with mounting plate for seat top. Fully welded support arm is formed upward to fasten to desk top with mounting plate. 1/4 thick interior mounting plate for floor anchors. 2 0 W x 2 9 D x 2 6 H Desk bolts to wall. Desk/seat arm bolts to floor and connects to the bottom of the desktop. Seat top is fastened to the desk/ seat arm after it is bolted to the floor. Anchors not by PDI. Finishes Stainless steel desk top. Stainless steel seat top. Page 12
Floor Mounted Bench bn1000 The BN1000 floor mounted bench from PDI provides costeffective, long-term value, and Fabricated with hard-wearing steel for long-lasting value, the BN1000 is Floor bolted, with fully welded mounting plates to ensure secure installation and multi gauge steel for heavy-duty support. Coated with factory primer for finish painting or powder coat finish. 10 gauge bench top flanged 2 all around Bench top supported by 21/2 schedule 40 steel pipe supports. Intermediate supports provided at 36 on center where bench exceeds 4 length. 12, 16, or 18 W x 8 L (maximum) Field welded to metal walls or embeds or mount with 1/2 anchors in fully grouted walls or concrete. Anchors not by PDI. Finish Stainless steel bench top. All stainless steel. 714.288.1770 sales@pdidet.com pdidet.com Page 13
Wall Mounted Bench bn2000 The BN2000 wall mounted bench from PDI provides costeffective, long-term value, and Fabricated with hard-wearing steel for long-lasting value, the BN2000 is Coated with factory primer for finish painting. 12 gauge steel surface, 11/2 flange, coated with factory primer finish. Bench supported by 3/16 thick gussets spaced at no more than 36 apart. 12, 16, or 18 W x 8 L (maximum) Gussets have 9/16 diameter holes for installation. Length Finish Up to 8 feet. Stainless steel top. All stainless steel. Page 14
Federal Bench FB1000 The FB1000 floor and wall mounted federal bench from PDI provides cost-effective, long-term value, and Fabricated from single sheet stainless steel for long-lasting value; the FB1000 is Health and safety Stainless steel seat provides a smooth, non-porous surface for easier cleaning and reducing the spread of germs. Maintains healthier environment Mounting 12 gauge steel seat top and sides; Interior: 1 thick rigid foam insulation 12 gauge steel @ 24 O.C. 1/4 thick base plate with 7/16 D mounting holes for installation 29 D x 34 H x 8 L (maximum) sections Steel mounting angles supplied for attachment to floor and wall. Stainless steel button head security screws are included for assembly. OPTION All exposed surfaces with a stainless steel brushed finish. 714.288.1770 sales@pdidet.com pdidet.com Page 15
Storage Locker SL1000 The SL1000 Storage Locker from PDI provides cost-effective, long-term value, and Fabricated with hard-wearing steel for long-lasting value, the SL1000 is Powder coat finish or factory primer for finish painting. 12 gauge steel locker with interior shelf. Front and sides perforated for ventilation. Front door includes handle and clasp for padlock (padlock not included). 1 6 W x 1 6 D x 3 1 H Locker bolts to wall with 3/8 anchors. Anchors not by PDI. Finish Stainless steel. Page 16
Folding Shower Seat SS1000 The SS1000 folding shower seat from PDI provides cost-effective, long-term value, and contributes to safer correctional and institutional environments. A versatile shower environment is created for regular or handicap occupants as needed. Fabricated with stainless steel for longlasting value; the SS1000 is virtually indestructible. Resistance to corrosion, Health and safety Brushed stainless steel provide a smooth, non-porous surface for easier cleaning and reducing the spread of germs. Corrosion resistant Maintains healthier environment 10 gauge stainless steel seat 1 diameter x 11 gauge stainless steel round tubes; 7 gauge stainless steel folding support guide 221/2 D x 30 W Mounting plates with 7/16 diameter holes for 3/8 anchors. Anchors not by PDI. Left hand (SS1000L/H). Right hand (SS1000R/H). SS1000L/H SS1000R/H 714.288.1770 sales@pdidet.com pdidet.com Page 17
Headquarters 577 N. Batavia Orange, CA 92868 714 288 1770 714 288 1769 (fax) sales@pdidet.com pdidet.com pdifurn 0513