Blue 2 3/8" TO 13 5/8"

Blue 2 3/8" TO 13 5/8"

TenarisHydril TenarisHydril offers outstandg premium connection design and technology worldwide With a comprehensive range of high performance products backed by an extensive global field service network and licensed threadg shops, we develop solutions to meet the needs of ever more demandg E&P environments TenarisHydril premium connections are supplied and supported by Tenaris, the leadg manufacturer and supplier of steel tubes and tegrated tubular services to the world's energy dustry For further formation please visit our website at wwwtenariscom TenarisHydril PREMIUM CONNECTIONS BLUE 3

Ma attributes size availability 2 3/8" to 13 5/8" features Designed for high performance and versatility ISO 13679 CAL IV tested and field proven Parabolic seal contact pressure profile mimizes gallg risk while improves sealg performance stability 70 ISO 13679 CAL IV tests Installed 70 countries Chosen by 200 operators 7 million feet stalled with Dopeless technology APPLICATIONS Deepwater HP/HT & Deep wells Horizontal & extended reach wells Shales Casg while drillg Thermal Applications Geothermal Surface & termediate casg Production casg, tie-backs and lers Tubg Options Dopeless technology Matched strength Special bevel Special clearance 4

Operational solutions 1 Easy make-up is developed with the rugged, coarse pitch thread and steep taper for deep stabbg 1 2 3 2 Superior compression strength obtaed by optimized torque shoulder and controlled 25 degree stab flank reduced clearance 3 % ternal and external pressure metal seal Toroidal design generates stable seal behavior for all combed-load conditions Dope pocket accommodates excess of thread compound for efficient and reliable make-up TenarisHydril PREMIUM CONNECTIONS BLUE 5

Seal design Behavior under extreme combed loads The sphere-to-cone seal geometry (toroidal surface on the p, tapered surface on the box) achieves the parabolic seal contact pressure profile This provides lower contact pressure peaks (mimizg gallg risks durg make-up) but higher average contact pressure combation with longer seal contact length When combed, these two characteristics provide a more stable sealg performance even under extreme combed loads This presents % PIPY gas-tightness and % API collapse pressure (or % PEPY gas-tightness) As achieved the thread design, and combation with taper and pitch parameters, seal configuration was optimized to ensure the best sealg performance while preservg seal tegrity Safer make-up The ma seal contact pot set apart from p end provides seal protection while runng and less sensitivity of the sealg capacity to axial displacement that could be reached under extreme loads Deep stabbg reduces slidg distance and risk of gallg Dope pocket When used with dope, the Dope pocket volume accommodates excess of thread compound, thus mimizg both thread tegrity (p) risk and weaker sealg performance due to dope entrapment The cyldrical crests of the box thread close to the dope pocket allow the surplus dope to flow from the threads to the dope pocket BOX Dope pocket Tangent pot (Sealg pot) p RADIUS 6

Stable contact pressures for all loadg conditions The TSH Blue connection's performance matches the pipe body's performance terms of tension, compression, ternal and external pressures This is clearly seen overlappg the connection service envelope (CSE) to the Von Mises Ellipse of the pipe body Connection performance validation is done accordg to the ISO 13679 CAL IV specification, over the 14 different loadg pots that are defed on the ellipse (% of the VME of the pipe body) not only for design verification, but also for customer qualification Sealg performance is evaluated each of the quadrants by plottg the seal contact pressure along the seal length for each of the loadg pots B % PB VME=CSE % CSE LOADING POINTS (LP) TEST LOAD ENVELOPE % API COLLAPSE INTERNAL PRESSURE % PIPY 4 5 3 6 50 7 2 A service envelope for Blue In each of the ISO 13679 CAL IV 14 loadg pots the tegrity and tensity of the contact pressures the metal-to-metal seal are checked, so as to ensure the sealg capacity of the connection COMPRESSION 8&9 -% PBYS MU -50 0 0 50 % APY CP 50 14 1 % PBYS TENSION 10 11 12 13 -% PEPY C EXTERNAL PRESSURE D SEAL CONTACT PRESSURE MAKE-UP LOADING POINT 1 LOADING POINT 2 LOADING POINT 3 LOADING POINT 4 LOADING POINT 5 Quadrant A Contact pressure under ternal pressure and tension PREMIUM CONNECTIONS BLUE SEAL LENGTH TenarisHydril 7

LOADING POINT 4 LOADING POINT 5 SEAL CONTACT PRESSURE SEAL LENGTH Quadrant B Contact pressure under ternal pressure and compression SEAL CONTACT PRESSURE LOADING POINT 5 LOADING POINT 6 LOADING POINT 7 LOADING POINTS 8&9 SEAL LENGTH Quadrant C Contact pressure under external pressure and compression SEAL CONTACT PRESSURE LOADING POINTS 8&9 LOADING POINT 10 LOADING POINT 11 LOADING POINT 12 SEAL LENGTH Quadrant D Contact pressure under external pressure and tension SEAL CONTACT PRESSURE MAKE-UP LOADING POINT 1 LOADING POINT 14 LOADING POINT 12 LOADING POINT 13 SEAL LENGTH 8

Thread design Improved compression and over torque capacity The proper combation of the thread configuration (reduced stabbg flank gaps and optimized stabbg flank angle) and the thicker negative torque shoulder section provides % compression ratgs as well as high over-torque capacity (normally 250% of maximum torque) Improved runng Thread parameters such as thread taper and thread pitch were also optimized order to provide the best runng response terms of simplicity and safety (deep stabbg, low cross-threadg risk, reduced turns to make-up position) This is achieved by usg two different tapers and two different thread pitches that allow to cover the whole range (from 2 3/8" to 13 5/8") Tensile capacity Optimized positive run-out load flank angle, able to equalize pipe body tensile capacity while providg better manufacturg and repairg conditions (compared to hooked thread profiles) BOX Reduced thread gap (stabbg flank) Positive load flank p BOX Negative torque shoulder PREMIUM CONNECTIONS BLUE p Thicker P nose TenarisHydril 9

Technical data table & Torque table for Blue

Technical data table 2 3/8" TO 5" Size Designation Nomal Weight lb/ft Wall Thickness Inside Pipe Body Standard Drift Special Drift Outside 2776 2776 2827 2846 2862 2913 3307 3346 3386 3437 3449 3488 3504 3937 3937 4016 4150 4150 4169 4193 4228 4441 4441 4441 4567 4610 4661 4681 4776 4921 4921 4961 5000 5047 5106 5114 5146 5189 5287 5512 5512 5630 5650 5673 5693 5756 5787 5874 Couplg Length Connection Inside Make-Up Loss Critical Section Area 2 3/8 2 7/8 3 1/2 4 4 1/2 5 460 510 5 630 660 735 640 7 860 935 9 1050 1070 770 920 1020 1270 1370 1430 1470 1550 820 950 10 1320 1485 1610 1650 18 1050 1160 1260 1350 1520 1660 1700 1770 18 2150 1300 1500 1800 2030 20 2140 2320 2410 2670 01 0218 0254 02 02 0336 0217 0276 0308 0340 0362 0392 0405 0216 0254 0289 0375 0413 0430 0449 0476 01 0226 0262 0330 03 0415 0430 0500 0224 0250 0271 02 0337 0375 03 0402 0430 0500 0253 0296 0362 0408 0422 0437 0478 0500 0562 19 1939 1867 1815 1785 1703 2441 2323 2259 21 2151 2091 2065 3068 2992 2922 2750 2674 2640 2602 2548 3620 3548 3476 3340 3240 3170 3140 3000 4052 4000 38 3920 3826 3750 3740 3696 3640 3500 4494 4408 4276 4184 4156 4126 4044 4000 3876 11 1845 1773 1721 1691 1609 2347 2229 2165 2101 2057 1997 1971 2943 2867 2797 2625 2549 2515 2477 2423 34 3423 3351 3215 3115 3045 3015 2875 3927 3875 3833 37 3701 3625 3615 3571 3515 3375 4369 4283 4151 4059 4031 4001 3919 3875 3751 3750 56 56 56 56 56 56 7205 7205 7205 7205 7205 7205 7205 8228 8228 8228 8228 8228 8228 8228 8228 87 87 87 87 87 87 87 87 9213 9213 9213 9213 9213 9213 9213 9213 9213 9213 101 101 101 101 101 101 101 101 101 1947 1915 1868 1833 1837 1797 2406 2339 2276 2228 2209 2185 2161 3016 2969 26 2799 2772 2736 2720 2720 3537 3474 3431 3356 3281 3262 3234 3093 3996 37 3917 3878 3823 3799 3791 3768 3740 3602 4421 4350 4264 4209 4193 4185 4134 4091 3969 26 26 26 26 26 26 3202 3202 3202 3202 3202 3202 3202 3616 3616 3616 3616 3616 3616 3616 3616 35 35 35 35 35 35 35 35 4012 4012 4012 4012 4012 4012 4012 4012 4012 4012 4579 4579 4579 4579 4579 4579 4579 4579 4579 sq 1304 1477 1693 1843 1928 2153 1812 2254 2483 2708 2858 3058 3143 2229 25 2916 3681 4005 4148 4304 4521 2274 26 3077 35 4321 4673 4822 5498 3009 3339 3601 3836 4408 4860 4918 5175 5498 6284 3773 4374 5275 5885 6070 6265 6791 7068 7835 Interchangeable where bracketed Small variations the connection Internal will appear Performance Data and Make-Up Torque for the connection correspond to the lighter weight (for more formation consult TenarisHydril Runng Manual) Compression efficiency for SC and MS options is the same as the standard connection For the MS option, the couplg OD is reduced to the mimum critical area capable of providg the same tensile efficiency as the standard option 12

13 PREMIUM CONNECTIONS BLUE TenarisHydril 2646 2681 2720 2752 2768 2811 3161 3236 3276 3311 3335 3370 3382 3772 3823 3870 3976 4020 4035 4059 4087 4276 4287 4335 4425 4488 4531 4547 4630 47 4815 4846 4870 4933 4992 4992 5020 5051 5138 5315 5354 5445 5508 5524 5543 5594 5622 5693 2705 2744 27 2831 2850 22 3228 3319 3366 3409 3437 3476 3492 3843 36 3961 4087 4138 4299 4362 4421 4528 4854 4898 4933 4965 5382 5453 5563 5634 5657 5677 5740 5772 5858 1114 1263 1431 1566 1634 1823 1539 1914 2116 2299 2423 2609 2672 1894 2199 2485 3140 3413 3512 3663 3838 2209 2288 2607 3230 3672 3979 40 4687 2562 2829 3067 3247 3732 4166 4193 4410 4659 5352 3377 3708 4475 5017 5154 5324 5772 6016 6645 860 970 0 1043 1182 1354 1474 1543 1722 1450 13 1986 2166 2287 2447 2515 1783 2072 2332 2945 3204 3318 3443 3617 1819 2144 2461 3044 3457 3739 3858 4398 2407 2671 2881 3069 3527 3888 3935 4140 4398 5027 3018 3499 4220 4708 4856 5012 5432 5654 6268 717 812 931 1014 1061 1184 997 1240 1366 1489 1572 1682 1729 1226 1425 1604 2025 2203 2281 2367 2487 1 1474 1692 2093 2377 2570 2652 3024 1655 1836 1980 2110 2425 2673 2705 2847 3024 3456 2075 2406 21 3237 3338 3446 3735 3887 4309 1173 1329 1523 1659 1735 1938 1631 2028 2235 2437 2572 2752 2829 2006 2331 2624 3313 3605 3733 3874 4069 2046 2412 2769 3425 3889 4206 4340 4948 2708 3005 3241 3453 3967 4374 4426 4658 4948 5655 3395 3937 4747 5297 5463 5639 6112 6361 7052 1238 1403 1608 1751 1832 2045 1721 2141 2359 2572 2715 25 2986 2117 2461 2770 3497 35 3940 4089 4295 2160 2546 2923 3615 4105 4440 4581 5223 2858 3172 3421 3644 4188 4617 4672 4917 5223 5970 3584 4155 5011 91 5766 52 6451 6715 7444 1434 1625 1862 2027 2121 2368 1993 2479 2731 2979 3144 3364 3458 2452 2849 3207 4049 4406 4563 4735 4973 2501 2948 3384 4186 4754 5141 5304 6048 3309 3673 3961 4220 4849 5346 5410 5693 6048 6912 4150 4812 52 6474 6677 6892 7470 7775 8619 1629 1846 2116 2304 2410 2691 2265 2817 3104 3385 3573 3823 3929 2786 3238 3644 4602 5007 5185 5380 5652 2842 3350 3846 4757 5402 5842 6028 6872 3761 4173 4501 4795 10 6075 6148 6469 6872 7855 4716 5468 6593 7357 7587 7831 8488 8835 9794 Compression Efficiency % Jot Yield Strength Outside Outside Critical Section Area Tensile Efficiency Special Clearance Couplg Options Matched StRENgth x 0 lb sq % ksi ksi ksi ksi ksi ksi Tensile Efficiency %

5 1/2" TO 9 5/8" 5 1/2 6 5/8 7 Size 7 5/8 7 3/4 8 5/8 9 5/8 Designation Nomal Weight lb/ft 1550 1700 2000 2300 2600 26 2840 2970 3260 2000 2320 2400 2800 3200 3500 3670 2300 2475 2600 2900 3200 3500 3800 4100 2970 3370 35 3900 42 4530 4610 4760 4860 51 5610 3600 4000 4400 4900 5200 5400 5870 3600 4000 4350 4700 5350 5840 5940 6110 64 7030 Wall Thickness 0275 0304 0361 0415 0476 0500 0530 0562 0625 0288 0330 0352 0417 0475 0525 0562 0317 0343 0362 0408 0453 0498 0540 05 0375 0430 0465 0500 0562 05 05 0625 0640 0687 0750 0400 0450 0500 07 05 0625 0687 0352 03 0435 0472 0545 05 0609 0625 0672 0734 Inside 40 4892 4778 4670 4548 4500 4440 4376 4250 6049 5965 5921 5791 5675 5575 5501 6366 6314 6276 6184 6094 6004 5920 5820 6875 6765 66 6625 6501 6435 6560 6500 6470 6376 6250 7825 7725 7625 7511 7435 7375 7251 8921 8835 87 8681 8535 8435 8407 8375 8281 8157 Pipe Body Standard Drift Outside 6063 6063 6102 6181 6307 6307 6350 6382 6469 7283 7283 7283 73 7409 7492 7539 7677 7677 7677 7677 7732 77 7870 7949 8425 8465 8465 8496 8539 8591 8740 8740 8772 8843 8937 9488 9488 9488 9626 9626 9638 9736 10626 10626 10626 10626 10626 10626 10626 10654 10728 10827 Couplg Length 10748 10748 10748 10748 10748 10748 10748 10748 10748 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 10669 10669 10669 10669 10669 10669 11496 11496 11496 11496 11496 Connection Inside 4911 4860 4789 46 4616 4589 4530 4506 4427 5973 5894 58 5749 5678 5619 5623 6287 6228 6189 6118 6063 6012 5969 58 61 6699 6659 6604 63 6561 6691 6632 6600 6506 63 7787 7709 7650 7535 7496 7437 73 8829 8781 8711 8659 8545 8494 83 8514 8435 8356 Make-Up Loss 4677 4677 4677 4677 4677 4677 4677 4677 4677 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 41 41 41 41 41 41 4968 4968 4968 4968 4968 Critical Section Area sq 4825 4767 4653 4545 4423 4375 4315 4251 4 5924 5840 5796 5666 50 5450 5376 6241 6189 6151 6059 5969 5879 57 56 6750 6640 6570 6500 6376 6310 6435 6375 6345 6251 6 7700 7600 7500 7386 7310 7250 7126 8765 8679 8599 8525 8379 8279 8251 8219 8 8001 Special Drift 4500 6250 6000 5875 6375 6500 6375 7625 8625 8500 8375 4514 4963 5828 6629 7513 7854 8275 8719 9571 5733 6526 6936 8133 9178 10061 10704 6656 7173 7549 8449 9317 10173 109 11881 8541 9720 10459 11193 12470 13141 13375 139 14296 15244 16494 10335 117 12763 14117 15010 15708 17132 102 114 12560 13572 15547 168 17250 17672 181 20502 Interchangeable where bracketed Small variations the connection Internal will appear Performance Data and Make-Up Torque for the connection correspond to the lighter weight (for more formation consult TenarisHydril Runng Manual) Compression efficiency for SC and MS options is the same as the standard connection For the MS option, the couplg OD is reduced to the mimum critical area capable of providg the same tensile efficiency as the standard option 14

15 PREMIUM CONNECTIONS BLUE TenarisHydril 5831 5874 53 6024 6102 6134 6169 6209 6283 7020 7051 7063 7157 7236 7299 7346 7409 7413 7441 7508 7567 7630 7685 7748 8075 8154 8201 8252 8335 8378 8488 8528 8547 8606 8685 9126 9181 9252 9331 9382 9421 9504 10079 10122 10165 10217 10323 10394 10409 10433 10496 10579 5925 5972 6067 6157 6220 6287 6331 7071 7146 7181 7291 7386 7465 7520 7484 7531 7563 7642 8201 82 8354 8413 8512 8563 8677 8724 8744 8819 89 9244 9331 9417 9512 9575 10165 10240 10311 10378 10504 10587 3836 4235 4965 5631 6381 6685 7026 7409 8144 5397 5746 5876 6932 7821 8541 9085 6050 60 6417 7203 72 8654 9316 100 7263 8266 8874 9534 10611 111 11383 119 12172 12969 14037 9033 9825 10852 12000 12753 13335 14564 9309 9998 10687 11506 13222 14375 14632 15018 16053 17422 940 880 910 870 910 870 3611 3970 4662 5303 6010 6283 6620 6975 7657 4587 5220 49 6506 7342 49 8563 5325 5739 6039 6759 7454 8138 8767 05 6832 7776 8368 84 9976 10513 10700 11192 11437 12195 13195 8268 9245 10210 11294 12008 66 13706 8204 9164 48 10857 12437 13504 130 14137 15121 16402 2482 2730 3205 3646 4132 4320 42 4795 5264 3153 3589 3815 4473 5048 34 5887 3661 3945 4152 4647 5124 95 6027 6534 4697 5346 5753 6156 6858 7228 7356 7695 7863 8384 71 5684 6356 7019 7765 8256 8639 9423 5640 6300 68 7465 81 9284 9487 9719 10395 11276 4062 4467 5245 5966 6762 7068 7448 7847 8614 5160 5873 6243 7320 8260 55 9634 5990 6456 6794 7604 8385 9155 9863 10693 7686 8748 9413 73 11223 11827 12037 91 12866 13720 14844 9302 10401 11486 12706 13509 14137 15419 9229 10309 11304 12215 13992 15192 125 154 17011 18452 4288 4715 37 6298 7137 7461 7862 8283 93 5447 6199 6589 7726 8719 58 10169 6323 6815 7171 27 8851 9664 10411 11287 8113 9234 9936 10633 11846 12484 12706 13291 13581 14482 15669 9819 10979 12125 13412 14260 14922 16276 9742 10882 11932 12893 14769 16036 16387 16788 176 19477 4965 5459 6411 7292 8264 8639 9103 91 10528 6307 7178 7630 8946 95 67 11775 7321 7891 8303 9294 10249 11190 12054 13069 9395 10692 11505 12312 13717 14455 14712 15389 15725 16769 18143 11369 12713 14039 129 16511 17279 18845 11280 12600 13816 14929 17101 18567 18975 19439 20791 222 5642 6204 7285 8287 9391 9817 10344 10898 11964 7167 8157 8670 10166 11472 76 13380 8320 8967 9436 10561 11646 12716 13698 14851 10676 12150 13074 13991 187 16426 16719 17488 17870 155 20617 12919 14446 153 17647 18763 19635 21415 12819 14318 15700 16965 19433 21099 21562 22089 23626 25627 Compression Efficiency % Outside Outside Critical Section Area Tensile Efficiency Special Clearance Couplg Options Matched StRENgth x 0 lb sq % Jot Yield Strength ksi ksi ksi ksi ksi ksi Tensile Efficiency %

9 7/8" TO 13 5/8" Size 9 7/8 10 3/4 11 3/4 11 7/8 13 3/8 13 1/2 13 5/8 Designation Nomal Weight lb/ft 62 66 68 7040 7210 4050 4550 5100 50 6070 6570 7110 7320 7660 7920 5400 6000 6500 7100 58 71 5450 6100 6800 7200 7700 70 0 8600 9800 8140 7910 8820 Wall Thickness 0625 0668 0700 0707 0725 0350 0400 0450 04 0545 05 0650 0672 0700 0734 0435 0489 0534 0582 0470 0582 03 0430 04 0514 00 05 0608 0625 0719 05 05 0625 Inside 8625 8539 8475 8461 8425 10050 90 9850 9760 9660 9560 9450 9406 9350 9282 108 10772 10682 10586 10935 10711 12615 12515 12415 12347 12275 12215 12159 12 11937 12340 12515 12375 Pipe Body Standard Drift Outside 10984 10984 10984 10984 11031 11575 11575 11654 11748 118 11913 11929 11929 11984 12752 12752 12752 12752 12854 12854 14173 14173 14252 14252 14299 14354 14402 14433 14598 14488 14665 14665 Couplg Length 12283 12283 13031 13031 13031 13031 13031 13031 13031 13031 13031 12992 12992 12992 Connection Inside 8691 8646 8593 8608 8573 9963 9885 96 9751 9692 9633 9570 98 9503 9452 100 10831 10753 10670 10973 10879 12520 12442 12371 12312 12261 12221 12182 12174 12150 12400 12478 12422 Make-Up Loss 5361 5361 5719 5719 5719 5719 5719 5719 5719 5719 5719 5719 5719 5719 Critical Section Area sq 8469 8383 8319 8305 8269 9894 9794 9694 9604 9504 9404 9294 9250 9194 9126 10724 10616 10526 10430 10779 105 12459 12359 12259 12191 12119 12059 12003 11969 11781 12153 12328 12188 Special Drift 8500 8375 9625 9504 10625 10625 10875 10625 12250 12000 12250 12250 18163 19322 20176 20362 20840 11436 13006 14561 15948 17473 18983 20624 21277 22101 23097 15463 17300 18815 20420 16841 20648 15514 17487 19445 20767 22160 23314 24386 25034 28587 23541 22788 25525 Interchangeable where bracketed Small variations the connection Internal will appear Performance Data and Make-Up Torque for the connection correspond to the lighter weight (for more formation consult TenarisHydril Runng Manual) Compression efficiency for SC and MS options is the same as the standard connection For the MS option, the couplg OD is reduced to the mimum critical area capable of providg the same tensile efficiency as the standard option 16

17 PREMIUM CONNECTIONS BLUE TenarisHydril 10654 10717 10756 10768 10791 11217 11256 11327 11394 11469 11539 11614 11646 11685 11728 12319 12398 12465 12531 12472 12638 13858 13898 13976 14028 14079 14122 14165 14189 14323 14283 14323 14421 10858 108 11303 11394 11484 11563 11650 11736 11827 11862 12469 12567 12646 12728 12638 12835 137 14051 14142 14205 14268 14323 14370 14402 14563 14441 14472 14634 15410 16408 17132 17332 17732 10394 11089 12346 13539 14883 16163 17524 18099 18820 19617 13175 14703 16010 17324 14288 17549 13973 14830 166 17681 18811 19770 20731 21258 24256 20003 19479 21702 910 0 14530 15457 16141 16290 16672 9149 10405 11649 12758 13979 15186 16499 17022 17681 18477 12370 13840 15052 16336 13473 16518 12411 13990 156 16614 17728 18651 109 20027 22869 18833 18231 20420 9990 10627 97 11199 11462 6290 7153 08 8771 9610 10441 11343 11702 12156 12703 8505 15 10349 11231 9262 11356 8533 9618 10695 11422 12188 12822 13412 13769 15723 12948 33 14039 16347 17389 18159 18326 18756 10292 11705 13105 14353 15726 17085 18562 19149 19891 20787 13917 170 16934 18378 15157 18583 13963 15738 17500 18690 19944 20982 21948 22531 25728 21187 20509 22973 17255 18356 19168 19344 19798 10864 12356 13833 15151 16600 134 193 20213 20996 21942 14690 16435 17875 19399 15999 19615 14738 16613 18473 19729 21052 22148 23167 23782 27157 22364 21649 24249 19979 24 22194 22399 22924 80 14307 16017 17543 19221 20881 22687 23405 24312 25406 17009 130 20697 22462 18525 22712 17065 19236 21389 22844 24376 25645 26825 27538 31445 25896 25067 278 22704 24152 25220 25453 26050 14295 16258 18201 19935 21841 23729 25780 26596 27627 28871 19329 21624 23519 225 21051 259 19392 21859 24306 259 27700 29142 30483 31293 35733 29427 28485 317 Compression Efficiency % Outside Outside Critical Section Area Tensile Efficiency Special Clearance Couplg Options Matched StRENgth x 0 lb sq % Jot Yield Strength ksi ksi ksi ksi ksi ksi Tensile Efficiency %

18 460 510 5 630 660 735 640 7 860 935 9 2 3/8 2 7/8 01 0218 0254 02 02 0336 0217 0276 0308 0340 0362 1520 16 1750 17 18 19 1700 1910 19 2030 2150 2270 2000 2260 2360 2410 2560 26 2210 2510 2630 26 28 29 2270 2560 26 2740 2920 3050 2570 2920 3060 3130 3340 3470 2300 2530 2630 26 2820 2940 28 3220 3360 3430 3630 3750 3320 3760 3940 4030 4260 4360 3740 4260 4470 45 4820 4920 30 4510 1670 1860 1930 1960 2070 21 1870 2 21 2230 2370 2500 2200 24 2600 2650 2820 2960 2430 2760 28 2960 3170 32 2500 2820 20 3010 3210 3360 2830 3210 3370 3440 3670 3820 2530 27 28 20 3 3230 31 3540 3700 3770 39 4130 3650 4140 4330 4430 46 40 4 46 4920 5040 5300 5410 4350 4960 230 250 260 270 2 300 260 2 300 300 320 340 300 340 350 360 3 400 330 3 3 400 430 450 340 3 400 410 440 460 3 440 460 470 500 520 350 3 3 400 420 440 430 4 500 510 540 560 500 560 5 600 640 650 560 640 670 6 720 740 5 6 12 1440 14 1510 1600 16 1450 1620 16 1730 1830 1930 1700 1920 2010 2050 21 22 18 2130 2240 22 2450 2540 1930 21 22 2330 24 25 21 24 2600 2660 2840 20 1960 2150 2240 22 2400 2500 2460 2740 2860 2920 30 31 2820 3200 3350 3430 3620 3710 31 3620 30 38 4 41 3360 3830 2010 2310 2440 2500 26 2870 2270 2610 2750 2820 3020 3230 2710 3 3260 3330 3570 30 3040 3460 3630 3720 3970 4230 3040 3470 3630 3720 3970 4230 3470 3930 4 4200 44 4760 29 3470 3660 3750 4040 4330 30 43 4620 4740 50 5440 4540 5220 00 5630 6040 6450 5170 5930 6230 63 6830 72 5460 6240 Torque table 2 3/8" TO 3 1/2" 1370 1520 15 1600 16 17 1530 1720 17 1830 1940 2040 10 2030 2120 2170 2300 2420 19 2260 2370 2420 25 26 2040 2300 2410 2470 2630 2750 2310 2630 2750 2820 3010 3120 2070 22 2370 2410 2540 2650 2600 20 3020 30 3270 33 29 33 30 3630 3830 3920 3370 3830 4020 4120 4340 4430 3560 4060 size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

19 PREMIUM CONNECTIONS BLUE TenarisHydril 2 7/8 3 1/2 9 1050 1070 770 920 1020 1270 1370 1430 1470 1550 0362 0392 0405 0216 0254 0289 0375 0413 0430 0449 0476 4740 4860 50 5200 4250 4860 5 5230 5470 4440 5 5370 10 5730 5860 2850 3450 35 3640 3840 3930 3360 37 30 4030 4210 4330 30 4460 4670 4770 40 50 5250 6000 6300 6430 6600 6770 5650 6500 6830 6930 7120 7320 6020 69 7340 7400 7610 7810 6250 7240 7610 76 78 6460 7440 7830 7920 5210 5350 5600 5720 46 5350 5620 5750 6020 6150 48 5620 5910 6060 6300 6450 3140 30 3940 4000 4220 4320 3700 4160 4350 4430 4630 4760 4350 4910 5140 5250 5450 5600 57 6600 6930 7070 7260 7450 6220 7150 7510 7620 7830 50 6620 76 70 8140 8370 85 68 7960 8370 8450 86 7 81 8610 8710 710 730 760 7 640 730 770 7 820 840 670 770 810 830 860 8 430 520 540 0 5 5 500 570 5 600 630 650 5 670 700 720 740 760 7 0 0 960 9 1020 850 9 1020 1040 1070 1 0 1050 1 1 1140 1170 940 10 1140 1150 11 1210 970 1120 1170 11 4030 4130 4330 4420 3610 4130 4340 4450 4650 4750 3770 4340 4560 46 4870 49 2420 2930 3040 30 3260 3340 2860 3210 3360 3430 35 36 3360 37 3970 4050 4210 4330 4460 5 5360 5470 5610 5750 40 30 5810 58 6050 6220 5120 5930 6240 62 6470 6640 5310 6150 6470 6530 6710 68 54 6320 6660 6730 60 6710 7170 7640 5840 6660 69 7140 7630 8120 6160 7010 7350 7520 30 8540 33 4070 4350 44 4910 5330 4000 4840 5170 5340 5840 6340 4720 56 60 62 6860 7440 61 7400 78 8140 8870 9600 6570 7850 8360 8620 93 10160 7020 83 8940 9220 40 10860 7240 8630 91 9470 10310 11150 73 8770 9330 9610 4270 4370 45 46 3830 4370 4600 4710 4920 5030 4000 4600 4830 4960 5160 5270 2570 3 3220 32 3460 3540 3020 3400 3560 3630 37 30 3560 4010 4200 42 4460 45 4730 5400 5670 57 5940 60 50 5850 6150 6240 6410 65 5420 62 6610 6660 6850 7030 5630 6520 6850 6910 7 72 5810 6700 7050 7130 size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

20 1550 820 950 10 1320 1485 1610 1650 18 1050 1160 3 1/2 4 4 1/2 0476 01 0226 0262 0330 03 0415 0430 0500 0224 0250 8130 8340 2810 3140 3270 3330 3530 3630 3440 3910 4 4200 4410 40 3970 45 4820 4940 5140 5310 50 58 61 6350 6560 6760 6010 7020 7430 7520 7770 10 6470 7540 7970 8340 8600 67 7960 8400 84 8760 30 8570 10260 10600 10710 30 11350 3650 4160 4370 4470 4730 40 4140 47 5030 5160 5430 5630 8940 9170 30 3450 3600 3660 38 39 37 4300 4510 4620 4850 5010 4370 5040 5300 5430 5650 5840 5600 6470 6810 69 7220 7440 6610 7720 8170 8270 80 8810 7120 82 8770 88 9170 9460 7470 8760 9240 9340 9640 9930 9430 112 11660 117 12130 124 4020 45 4810 4920 5200 53 40 5260 30 56 5970 61 1220 0 420 470 4 500 530 540 520 5 620 630 660 6 600 6 720 740 770 0 760 8 930 0 9 1010 0 1050 1 1130 1170 1200 970 1130 1200 1210 0 12 1020 11 1260 1270 1310 1350 12 1540 15 1610 1650 1700 0 620 660 670 710 740 620 720 750 770 810 840 6910 70 23 2670 27 2830 3000 30 2920 3320 34 3570 3750 3870 3370 38 4 4200 4370 4510 4330 5000 5260 5400 5750 5 5970 6320 63 6600 6810 00 6410 6770 6870 70 7310 5770 6770 7140 7220 7450 76 72 8720 10 9 93 9650 3 3540 3710 30 4020 4170 3520 4060 42 43 4620 47 10450 112 41 5030 5370 40 6050 60 5270 6330 6760 6970 7610 8250 6070 72 7770 10 8730 9460 7700 9160 9740 30 10910 117 9200 100 11570 11910 12930 13940 9760 11510 12210 60 13610 14660 10330 12160 120 13270 14370 15470 13420 15670 16570 17020 18370 19710 5710 6940 7430 7670 8400 9140 60 70 8510 87 9630 10470 7320 7510 2530 2830 2940 3000 31 3270 3 3520 36 37 3970 4 3570 4120 4340 4450 4630 47 45 52 70 5720 50 60 5410 6320 66 6770 69 7210 5820 67 7170 7270 7510 7740 6 7160 7560 7640 78 8130 7710 9230 40 9640 9930 10220 32 3740 3930 4020 4260 4410 3730 4300 4530 4640 48 5070 3 1/2" TO 5" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

21 PREMIUM CONNECTIONS BLUE TenarisHydril 4 1/2 5 1260 1350 1520 1660 1700 1770 18 2150 1300 1500 1800 0271 02 0337 0375 03 0402 0430 0500 0253 0296 0362 4610 5360 5660 5810 6070 62 50 5940 62 6460 6700 60 5960 7020 7440 75 7860 8150 6540 76 8130 82 8600 6660 7820 82 8430 8750 60 7070 8310 80 9270 9600 75 8920 9450 9930 102 20 11420 11920 12060 12470 12870 4000 43 4530 4610 47 4970 4700 5220 5430 10 5740 5970 5840 64 5070 50 6230 63 66 6920 5600 6530 6920 7 7370 7650 6560 7720 81 8340 8650 8970 71 8450 8940 9120 9460 97 7330 8600 9 9270 9630 9970 77 9140 96 9850 10200 10560 8340 9810 10400 100 10920 11310 10470 60 13 13270 13720 14160 4400 4820 49 5070 5270 5470 5170 5740 5970 6060 6310 6570 6420 7140 6 0 850 870 910 940 760 8 940 970 1010 1040 8 1050 1120 1140 11 1220 9 1150 1220 1240 12 1340 0 1170 1240 1260 1310 1360 1060 0 1320 1340 13 1440 1140 1340 1420 1440 14 1540 1430 1710 17 1810 1870 1930 600 660 6 6 720 750 710 7 810 830 860 0 8 970 3920 4560 4810 4940 5160 5350 4330 5050 5350 54 5700 5910 5070 5970 6320 6440 66 6930 60 6530 6910 7050 7310 7570 5660 6650 7040 7170 7440 7700 6010 7060 74 7610 78 8160 6440 75 30 8150 8440 8740 9710 10130 10250 10600 10940 3400 3720 3850 3920 4070 4220 4000 4440 4620 46 48 5070 4960 20 7440 10 9640 90 108 11830 8340 10770 11120 12160 13210 9710 116 12470 12870 14050 15230 10450 20 13350 13760 15000 16240 10650 12750 135 14010 15270 16530 112 134 14360 140 16120 17440 12060 14370 152 15750 17140 18520 15630 18470 19600 20170 218 235 70 00 101 10520 11540 60 11650 124 128 14130 15370 12 14600 4150 4820 50 5230 5460 5660 45 5350 5660 5810 6030 6260 5360 6320 6700 6820 7070 7340 58 6910 7320 7460 7740 10 59 7040 7450 75 78 8150 6360 74 7920 60 8340 8640 6820 30 8510 8630 8940 9250 8570 102 10730 10850 11220 115 3600 3940 40 4150 4310 4470 4230 4700 48 4960 5170 5370 5260 5840 size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

22 1800 2030 20 2140 2320 2410 2670 1550 1700 2000 2300 5 5 1/2 0362 0408 0422 0437 0478 0500 0562 0275 0304 0361 0415 6740 6830 7 73 6520 7300 7560 7660 79 8310 6750 7560 7820 7930 8260 85 60 7770 50 8160 8500 8830 7630 8540 8830 9310 96 50 40 9320 9450 9830 10220 9230 10410 10700 10850 112 11720 4730 5220 5410 10 5740 50 5270 58 6120 6220 64 6750 6260 7040 7330 7440 7770 8 7360 8340 8640 8770 7410 7510 7820 8120 7170 30 8320 8430 87 9140 7430 8320 8600 8720 9450 7650 80 8860 89 9350 9710 83 93 9710 9850 10240 10650 8860 9940 10250 10400 10810 11240 10150 11450 11770 11940 12410 128 5200 5740 50 6060 6310 60 50 6470 6730 6840 7130 7430 68 7740 60 81 80 8920 8 9170 00 9650 1010 1020 1070 1 9 1 1130 1150 1200 0 1010 1130 1170 11 1240 12 1040 1170 1210 1220 12 1320 1140 12 1320 1340 1400 1450 1210 1360 1400 1420 1470 1530 13 1560 1610 1630 16 1760 710 7 810 830 860 8 7 8 920 930 970 1010 940 1060 1 1120 1170 1220 1 0 1300 1320 5730 5810 6040 6270 40 6210 6430 6510 67 7060 5740 6430 6650 6740 7020 7300 5910 6600 6840 6940 7230 7510 64 7260 7510 7610 7910 8230 6840 76 7920 30 8360 86 7850 8850 9 9220 9960 4020 4440 4600 46 48 5060 44 5000 5200 52 10 5740 5320 59 6230 6320 6600 68 6260 70 7340 7450 15600 16 17600 19 136 16450 17560 18 19770 21430 141 17020 18160 18730 20430 22130 144 17360 18510 1 20810 22540 160 19200 20440 21070 22940 24810 17360 20670 22000 22670 24660 26650 21 24970 26520 272 29600 31920 90 12120 13000 13450 14770 16 11440 139 15020 130 17060 18600 137 16810 120 18620 20430 22250 16940 20560 22010 22730 6070 6150 6400 6640 5870 6570 60 68 71 74 60 60 7040 7140 7430 7730 6260 69 7250 7340 7650 70 6870 76 70 60 83 8710 7250 8140 83 8510 8850 9200 8310 9370 9630 9770 10150 100 4260 4700 4870 4960 5170 5360 4740 52 10 5600 5830 60 5630 6340 6600 6700 69 7300 6620 7510 77 78 5" TO 6 5/8" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

23 PREMIUM CONNECTIONS BLUE TenarisHydril 6 5/8 2300 2600 26 2840 2970 3260 2000 2320 2400 2800 3200 0415 0476 0500 0530 0562 0625 0288 0330 0352 0417 0475 9170 60 85 9740 60 10210 10660 11 8930 10150 10460 10620 11560 100 11240 11410 11910 12410 70 11460 11810 119 10 13040 11240 12770 13160 13350 13930 14510 5660 6340 6600 6700 7010 7330 6650 75 7870 10 8420 8830 7170 8220 8520 86 9140 9610 8720 10 103 10570 11140 11710 9910 11410 11860 120 12760 13430 10520 9440 10710 70 11230 11730 12220 9820 11170 11510 116 12200 12720 10540 119 12360 50 13 13650 12610 129 131 13760 14340 12360 14050 144 146 15320 15960 6230 6970 7260 7370 7710 60 7320 8340 8660 8810 9260 9710 78 40 9370 50 50 10570 10 11420 11630 12250 128 100 50 13050 132 14040 14770 13 1430 12 1460 1510 1530 1600 1670 1340 1520 1570 15 1660 1730 1440 1640 16 1710 17 1860 1510 1720 1770 10 18 1960 16 1920 1970 2000 20 21 850 0 9 1010 1050 1 0 1140 11 1200 1260 1320 10 1230 12 1300 1370 1440 1310 1500 1560 15 1670 1760 14 1710 17 1810 1910 2010 77 8130 72 82 80 86 60 9440 75 8630 88 30 9430 9830 8140 9270 50 9700 10120 100 8560 9740 40 101 10630 50 10850 111 11350 11840 12330 4810 53 5610 5700 5960 6230 5650 6440 66 6810 7160 7510 60 69 7240 73 7770 8170 7410 8510 8820 89 9470 90 8420 9700 10270 10850 11420 240 270 190 24010 25650 26470 28930 31400 20870 25150 26860 27710 30270 32840 229 27600 29450 303 33150 35930 239 28740 30650 31600 34460 37320 27 32330 34410 35460 385 41720 13 16360 17670 18320 202 22240 161 20220 21840 22640 25070 274 17750 22170 23940 24830 274 30130 22350 277 290 31040 342 370 254 31570 34000 35220 38870 42520 8250 8600 7720 8770 50 91 00 40 9140 9410 60 99 10400 8620 9810 10120 10270 10720 11170 60 10310 10630 107 11260 11740 10120 114 11840 12020 40 13060 50 5710 5940 6030 6310 6600 59 6820 70 7210 75 70 6450 7400 7670 7810 8230 8650 7850 10 9340 10 30 10540 8920 10270 10670 10870 114 120 size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

24 3500 3670 2300 2475 2600 2900 3200 3500 3800 4100 2970 6 5/8 7 7 5/8 0525 0562 0317 0343 0362 0408 0453 0498 0540 05 0375 109 12620 13 13350 140 14820 11460 13140 13640 138 14650 15400 60 7440 7750 78 82 86 72 83 8700 8860 9330 9810 70 10 9360 40 70 10600 8920 10350 107 10 11640 122 9960 11540 12030 12270 13000 13720 109 12710 13240 13500 142 15070 110 13750 14310 145 15430 16260 13200 15230 15840 16150 17070 179 10 103 120 138 14420 146 100 16300 12610 14450 15000 152 16120 16940 7210 81 8530 8670 9 50 10 9220 70 9750 10260 107 85 9910 10300 104 11660 9810 113 11860 12 120 13520 10960 126 13230 13500 14300 150 120 139 14560 14850 15710 165 130 15130 15740 16050 16970 178 14520 16750 17420 17770 187 197 9910 11420 1650 18 1970 2000 2 2220 1720 1970 2050 20 2200 2310 9 1120 1160 11 1240 1300 10 1260 1310 1330 1400 1470 1170 1350 1400 1430 1510 15 1340 10 1620 1650 1750 1840 14 1730 10 1840 10 2060 1650 1910 19 2030 2140 2260 17 2060 2150 21 2310 2440 19 22 23 2420 2560 2700 1350 1560 9340 10730 11140 11350 119 12600 9740 11170 115 11810 12450 130 70 6320 65 6700 7040 73 61 7120 7400 7530 7930 8340 6630 7660 7960 8 8560 10 75 80 9160 9350 98 10450 8470 9810 10230 10430 50 11660 9330 100 10 114 12140 12810 10120 116 12160 12400 13120 13820 11220 120 13460 13730 14510 152 7660 8820 28320 34940 375 38910 428 46850 28510 350 37720 330 429 46930 15960 20040 216 22500 240 27400 18460 23200 250 26040 288 31720 20170 25330 273 28420 31520 34620 23370 292 31650 32830 363 39930 260 325 351 364 40370 44260 28740 35750 38560 39960 44170 483 31030 384 41470 42960 47440 51910 35020 43270 46570 48210 53160 58 236 297 98 11360 110 12020 126 13340 10310 11830 122 00 131 13860 50 6700 69 70 7450 7810 60 7540 7830 7970 8400 8830 7020 8 8420 85 60 40 30 9320 9700 90 104 60 8960 103 10830 40 11700 12350 98 11440 11920 12150 12850 13560 10710 123 128 13130 138 14630 118 13710 14260 14540 15360 161 8 9340 6 5/8" TO 7 3/4" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

25 PREMIUM CONNECTIONS BLUE TenarisHydril 7 5/8 7 3/4 2970 3370 35 3900 42 4530 4610 4760 4860 51 5610 0375 0430 0465 0500 0562 05 05 0625 0640 0687 0750 107 109 11570 12150 10700 12420 12910 13150 138 14630 115 13470 14020 14300 15130 150 12610 14670 152 1 164 17410 14030 16320 17010 17360 183 19430 144 16830 17530 178 18920 19970 14960 17220 170 18230 19240 20240 15970 18420 19160 130 20630 21740 16500 140 19810 20200 21360 22520 181 200 210 22220 234 24760 20540 23560 24500 24970 11870 120 12730 13370 11770 13660 14200 14470 152 160 12740 14820 15420 15730 16640 170 13870 16140 16810 17140 18140 19150 15430 170 18710 19 20230 21370 15940 18510 192 19670 20810 21970 16460 18940 196 20050 21160 22260 17570 20260 210 214 226 23910 18150 20940 217 22220 23500 24770 20010 23050 239 24440 25840 27240 225 25920 260 27470 1620 1650 1740 1820 1610 1860 1940 1970 20 21 1740 2020 2 2150 2270 23 18 2200 22 2340 2470 2610 2 2450 20 2600 2760 2910 2170 2520 2630 26 2840 3000 2240 25 26 2730 28 3040 2400 2760 2870 2930 30 3260 24 2860 2970 3030 3200 33 2730 3140 3270 3330 3520 3710 30 3530 36 3750 9170 9330 9830 10330 9 10560 10970 111 11810 12440 9840 11450 11920 12160 12860 13560 10720 12470 129 13240 14020 140 11930 13870 14460 14760 15630 16520 12320 14310 140 15200 160 16970 12720 14640 15220 100 16350 17200 13570 15660 162 16600 17540 184 14030 161 16840 17170 18160 19140 15460 17810 18530 188 19970 21050 17460 20030 20830 21220 32240 33460 37130 400 29130 360 320 41010 45460 49920 31350 39270 42440 44020 48770 53520 34450 43050 464 48210 53370 58530 37620 46850 50540 523 57920 63450 375 46720 503 52200 576 63160 37460 46510 50130 51930 57360 627 407 50570 544 56440 62310 681 42570 52750 56820 58850 64960 71060 48260 5 64120 663 731 79970 56130 6 740 76640 9710 98 10410 10940 9630 111 11620 11840 00 13170 10420 12120 12620 12870 13620 14360 11350 13200 13750 14020 14840 15670 12630 146 15310 15620 160 174 13040 15150 157 160 17030 17970 13460 100 16 16410 17320 18220 14370 165 17240 175 18570 170 14850 17140 17830 181 19220 20270 16370 18860 19620 20000 21140 222 184 21200 22050 22470 size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

26 5610 3600 4000 4400 4900 5200 5400 5870 3600 4000 4350 7 3/4 8 5/8 9 5/8 0750 0400 0450 0500 07 05 0625 0687 0352 03 0435 263 277 11710 13440 13960 14210 149 15760 122 13840 14260 144 15 15750 15050 17450 18210 185 19720 20850 17410 20140 209 21420 226 23970 18570 21500 22440 220 24300 25700 190 22930 230 24450 25970 274 21560 24920 26000 26540 28160 297 12230 13860 14340 145 15310 16040 130 15840 16430 16730 17620 18510 156 17970 186 150 20120 21200 220 30570 128 147 15360 15630 164 17340 13510 15220 156 15930 16620 17330 16560 19200 20030 20440 216 22940 19150 22150 230 23560 24960 26370 20430 23650 246 251 26730 28270 217 25220 26350 260 28570 30240 23720 27410 28600 291 309 32760 13450 15250 15770 16050 16840 17640 152 17420 170 18400 193 20360 17250 19770 20560 20960 22130 23320 3960 4170 1760 2020 20 2130 2250 2360 1840 20 2140 2170 2270 2360 2260 2620 2730 27 2960 3130 2610 3020 3150 3210 3400 3600 27 3230 3370 3440 3650 3860 2970 3440 35 3670 30 4120 3230 3740 30 39 4220 4470 1830 20 2150 21 2300 2410 20 23 2460 2510 2640 27 2350 2700 20 2860 3020 31 22420 23620 90 11420 11870 120 12740 13400 10440 11760 12120 12310 12840 133 127 14830 154 157 16760 17720 140 17120 17840 18210 192 20370 157 182 170 19470 20660 21850 16830 194 20360 207 22070 23370 18330 211 22 22560 23940 25310 10400 117 121 12400 13010 13630 11820 13460 13970 14220 149 15730 13330 15270 158 161 17 120 84330 92020 30250 381 41360 42940 47710 52470 34940 441 470 49750 300 60850 380 487 52870 54920 61050 671 462 58360 63200 65610 72860 48830 61530 66620 69160 767 84400 52720 66350 71810 74540 82720 0 56310 706 76430 79310 87930 960 33700 428 46560 48400 53910 59420 37760 47960 52040 540 60200 66330 43450 160 59850 621 69220 76240 23740 25010 10540 12 60 127 134 141 50 12460 12830 13030 13600 141 130 15710 163 16720 17750 18770 15670 18130 188 192 20420 21570 16710 19350 20200 20610 21870 23130 17820 20640 21560 22010 23370 24740 19400 22430 23400 238 25340 260 10 12470 12910 13130 137 14440 10 14260 147 15060 15860 16660 14 16170 16820 17150 18 1 7 3/4" TO 9 7/8" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

27 PREMIUM CONNECTIONS BLUE TenarisHydril 9 5/8 9 7/8 4700 5350 5840 5940 6110 64 7030 62 66 68 7040 0472 0545 05 0609 0625 0672 0734 0625 0668 0700 0707 17170 19760 205 209 22230 23460 20270 23450 24500 25030 26610 281 220 25600 267 273 291 30970 216 25130 262 26870 28620 30360 22560 26140 27350 27960 297 315 24660 28530 29850 30510 324 34470 27140 31330 32760 334 35630 377 241 278 29140 297 31670 33570 230 29370 30710 313 333 353 27340 31560 33060 33820 36070 38330 272 31520 188 21740 22640 230 24450 25810 22300 250 260 27530 29270 31010 24300 28160 29470 30130 32 34070 23850 27640 28920 260 314 33400 24820 28750 300 30760 32760 34750 27130 313 32840 33560 35740 37920 29850 34460 36040 36830 391 41560 26610 30670 32050 32760 34840 36930 2 32310 337 34520 36720 38930 30070 34720 36370 37200 396 42160 30020 34670 25 2960 30 3150 3330 3520 3040 3520 36 3750 39 4230 3310 3840 4020 4 43 4650 3250 3770 3940 4030 42 40 33 3920 4 41 4470 4740 3700 42 44 45 4870 5170 4070 4700 4910 5020 5340 5670 3630 41 4370 4470 4750 5040 3830 4410 4610 4710 5010 5310 4 4730 4960 5070 5410 5750 40 4730 145 160 174 17840 1 19940 17230 19930 20830 212 22620 23960 187 21760 22770 232 240 26320 18430 21360 22350 22840 24330 25810 191 22220 23250 23770 25310 26850 20960 24250 25370 25930 27620 29300 23070 26630 27850 28460 302 32 20560 23700 24770 25310 26920 28530 21700 24960 26 26670 28370 300 23240 26830 28 28750 30660 325 23200 267 47710 60500 65610 68170 75840 83520 57160 72310 78370 81400 4 9 61630 77830 84300 87540 97260 106970 572 72270 78270 81260 260 99250 60560 76360 82670 85830 310 1047 67460 84840 910 270 105700 116130 74740 936 101270 105060 116430 1270 67740 856 928 96470 107240 1110 71820 710 98270 102050 1133 124720 76570 965 104600 108600 120610 132630 75350 050 15450 177 18520 188 20010 21 18240 21 22050 22530 230 25370 198 23040 24 24650 26260 27870 110 22620 23660 241 25760 27320 20300 23530 24620 25160 260 28430 221 256 26870 27460 29240 31020 24430 28200 294 30130 32070 34000 21770 250 26230 260 28500 30210 229 26430 27640 28240 30040 31850 24610 28400 29750 30440 32460 34500 24560 28370 size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

28 7040 7210 4050 4550 5100 50 6070 6570 7110 7320 7660 9 7/8 10 3/4 0707 0725 0350 0400 0450 04 0545 05 0650 0672 0700 33020 33770 36030 382 28230 320 340 34850 37160 39460 15730 16450 16450 16450 16450 16450 17920 18700 18700 18700 18700 18700 20540 21410 21410 21410 21410 21410 22560 23470 23470 23470 23470 23470 24860 25810 25810 25810 25810 25810 26300 273 273 273 273 273 29970 31020 31020 31020 31020 31020 32000 32000 32000 32000 32000 32000 322 33320 33320 33320 36320 37150 39630 42 31050 35810 37500 38340 408 43410 17300 18 18 18 18 18 19710 20570 20570 20570 20570 20570 225 230 230 230 230 230 24820 25820 25820 25820 25820 25820 27350 283 283 283 283 283 28930 30130 30130 30130 30130 30130 32970 34120 34120 34120 34120 34120 35200 35200 35200 35200 35200 35200 320 36650 36650 36650 40 5070 5400 5740 4230 48 5 5230 70 5920 2360 2470 2470 2470 2470 2470 26 2810 2810 2810 2810 2810 30 3210 3210 3210 3210 3210 33 3520 3520 3520 3520 3520 3730 3870 3870 3870 3870 3870 30 4 4 4 4 4 4500 4650 4650 4650 4650 4650 40 40 40 40 40 40 4840 5000 5000 5000 270 28700 30630 32540 24000 27670 289 29620 315 33540 13370 139 139 139 139 139 15230 150 150 150 150 150 17460 18200 18200 18200 18200 18200 191 190 190 190 190 190 21130 21940 21940 21940 21940 21940 22360 232 232 232 232 232 25470 26370 26370 26370 26370 26370 27200 27200 27200 27200 27200 27200 27450 28320 28320 28320 102920 106860 1186 130500 78670 99 1072 111360 123620 1358 40320 51820 56420 58720 65610 72510 410 61660 67120 69850 740 86220 56060 71830 78140 812 750 210 61850 7 859 89430 99770 681 86970 944 98250 1020 1200 63970 81200 88 910 1018 112230 82020 104 112930 117350 1305 143840 83600 1059 114930 119410 132830 146260 88830 110 1219 126710 29720 303 32430 34450 25410 29300 306 31370 33440 310 14160 14810 14810 14810 14810 14810 16130 16830 16830 16830 16830 16830 184 19270 19270 19270 19270 19270 20300 21120 21120 21120 21120 21120 22370 23230 23230 23230 23230 23230 23670 24650 24650 24650 24650 24650 26970 27920 27920 27920 27920 27920 280 280 280 280 280 280 260 299 299 299 9 7/8" TO 13 3/8" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

29 PREMIUM CONNECTIONS BLUE TenarisHydril 10 3/4 11 3/4 11 7/8 13 3/8 7660 7920 5400 6000 6500 7100 58 71 5450 6100 6800 0700 0734 0435 0489 0534 0582 0470 0582 03 0430 04 33320 33320 34240 352 352 352 352 352 218 22670 22670 22670 22670 22670 24720 25600 25600 25600 25600 25600 260 277 277 277 277 277 29250 30070 30070 30070 30070 30070 24450 252 252 252 252 252 28770 29610 29610 29610 29610 29610 24300 25010 25010 25010 25010 25010 27320 250 250 250 250 250 30930 31710 31710 31710 31710 31710 36650 36650 37660 38810 38810 38810 38810 38810 240 24940 24940 24940 24940 24940 271 28160 28160 28160 28160 28160 2 30560 30560 30560 30560 30560 321 330 330 330 330 330 260 27820 27820 27820 27820 27820 31650 32570 32570 32570 32570 32570 26730 27510 27510 27510 27510 27510 30050 30860 30860 30860 30860 30860 34020 348 348 348 348 348 5000 5000 5140 52 52 52 52 52 32 3400 3400 3400 3400 3400 3710 3840 3840 3840 3840 3840 4040 4170 4170 4170 4170 4170 43 4510 4510 4510 4510 4510 3670 37 37 37 37 37 4320 4440 4440 4440 4440 4440 3650 3750 3750 3750 3750 3750 4 4210 4210 4210 4210 4210 4640 4760 4760 4760 4760 4760 28320 28320 29 299 299 299 299 299 18610 19270 19270 19270 19270 19270 21010 21760 21760 21760 21760 21760 22870 23610 23610 23610 23610 23610 24860 260 260 260 260 260 207 21500 21500 21500 21500 21500 24450 25170 25170 25170 25170 25170 20660 21260 21260 21260 21260 21260 23220 23840 23840 23840 23840 23840 262 260 260 260 260 260 140920 1120 944 119460 129450 134440 149420 164410 52070 66660 724 75410 84160 92920 652 83740 91120 94810 1058 116970 743 3 1037 1079 1205 1331 84040 1076 117150 1218 136060 150250 62530 250 87340 8 101520 112150 74470 320 103660 107830 120340 132860 66840 86430 94270 981 109940 121700 784 101470 660 115250 1240 142830 89620 115610 126010 131210 146810 162410 299 299 30820 31750 31750 31750 31750 31750 19700 20400 20400 20400 20400 20400 22250 23040 23040 23040 23040 23040 24210 25000 25000 25000 25000 25000 26330 27060 27060 27060 27060 27060 22010 22760 22760 22760 22760 22760 258 26650 26650 26650 26650 26650 21870 22510 22510 22510 22510 22510 245 25250 25250 25250 25250 25250 27840 28540 28540 28540 28540 28540 size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft

30 7200 7700 70 0 8600 9800 8140 7910 8820 13 3/8 13 1/2 13 5/8 0514 00 05 0608 0625 0719 05 05 0625 33020 33740 33740 33740 33740 33740 350 36270 36270 36270 36270 36270 370 38530 38530 38530 38530 38530 39910 40650 40650 40650 40650 40650 40970 41750 41750 41750 41750 41750 46350 47360 47360 47360 47360 47360 37170 37910 37910 37910 37910 37910 33500 35270 35270 35270 35270 35270 36710 38430 38430 38430 38430 38430 36320 37 37 37 37 37 39 390 390 390 390 390 415 423 423 423 423 423 430 44720 44720 44720 44720 44720 45070 45930 45930 45930 45930 45930 509 52 52 52 52 52 408 41700 41700 41700 41700 41700 36850 380 380 380 380 380 403 42270 42270 42270 42270 42270 40 5060 5060 5060 5060 5060 5330 5440 5440 5440 5440 5440 5670 57 57 57 57 57 59 6 6 6 6 6 6150 6260 6260 6260 6260 6260 60 7 7 7 7 7 56 56 56 56 56 5030 52 52 52 52 52 10 5760 5760 5760 5760 5760 270 286 286 286 286 286 30220 30830 30830 30830 30830 30830 32130 32750 32750 32750 32750 32750 33920 340 340 340 340 340 34820 354 354 354 354 354 39400 40260 40260 40260 40260 40260 315 32220 32220 32220 32220 32220 284 299 299 299 299 299 31200 32670 32670 32670 32670 32670 98400 1268 1382 1439 161070 178170 106510 137140 1493 1520 1730 1922 112970 145240 158150 164600 183960 203320 119370 153270 166830 173610 1930 214300 121040 1270 168960 175810 196340 2168 127400 162610 1766 183740 204860 2259 106510 136320 148250 154210 172 1000 810 143070 19 162430 1817 201140 120300 1549 168850 1757 196600 217410 29720 30370 30370 30370 30370 30370 32000 32640 32640 32640 32640 32640 34020 346 346 346 346 346 35920 365 365 365 365 365 36870 375 375 375 375 375 41720 42620 42620 42620 42620 42620 33450 34120 34120 34120 34120 34120 30150 31740 31740 31740 31740 31740 33040 345 345 345 345 345 13 3/8" TO 13 5/8" size (od) Nomal weight Wall thickness SMYS of Steel Grade YIELD TORQUE Make Up torque Mimum Maximum Mimum Optimum Maximum SHOULDER Torque ksi lb/ft SMYS: Specified Mimum Yield Strength An appropriate safety factor should be applied to these yield torque values

TenarisHydril PREMIUM CONNECTIONS BLUE 31

wwwtenariscom For further formation on our connections, please visit our website and fd: Runng Manual (general guideles on handlg and care of connections and well stallation recommendations) Premium Connections Performance Data (connections performance, torque values, geometries and pipe body data) Blankg Dimensions Threadg & Repair Shops locations For technical assistance, please contact premiumconnections@tenariscom Tenaris has produced this brochure for general formation only While every effort has been made to ensure the accuracy of the formation contaed with this publication, Tenaris does not assume any responsibility or liability for any loss, damage, jury resultg from the use of formation and data here Tenaris products and services are only subject to the Company s standard terms and Conditions or otherwise to the terms resultg from the respective contracts of sale, services or license, as the case may be The formation this publication is subject to change or modification without notice For more complete formation please contact a Tenaris s representative or visit our website at wwwtenariscom This brochure supersedes TSH / PC / Version 03 / September 2012 TSH / PC / Version 04 / July 2013 Tenaris 2013 All rights reserved