TMS0E product guide features or ton ( or mt) Capacity 36 ft.-1 ft. (11-33.5 m) 4 section, full power sequenced synchronized boom 33 ft.-56 ft. (.1-17 m) offsettable bi-fold lattice swingaway extension Optional 33 ft. (.1 m) lattice swingaway extension Optional 20 ft. (6.1 m) or ft. (12.2 m) swingaway extension inserts Grove MEGAFORM boom Up to 16,0 lbs. (7,484 kg) hydraulically installed and removed counterweight 4 HP (336 kw) Cummins diesel engine contents Features 2 Specifications 3 Dimensions 5 Travel Proposal 6 Working Range 7 Main Boom and Swingaway Charts 8 Working Range w/inserts 16 Swingaway Charts w/one 20' insert 17 Swingaway Charts w/two 20' inserts 18 Load Handling 19 Truck Mounted Hydraulic Crane
features 2 Optional 20 ft. (6.1 m) or ft. (12.2 m) swingaway extension inserts offer excellent capacities with an unprecedented tip height of up to 212 ft. Standard front & rear air ride suspension provides comfortable ride at max speed of mph (5 Km/h) Cummins ISM 4 diesel carrier engine delivers horsepower and torque needed to negotiate tough jobsites and achieve highway travel speeds 36-1 ft. (11-33.5 m) four section full power sequenced synchronized MEGAFORM boom designed for maximum vertical and lateral strength
specifications Superstructure Boom 36 ft. - 1 ft. (11 m - 33.5 m) four section, full power sequenced synchronized boom. Maximum Tip Height: 118 ft. (.9 m). Folding Lattice Extension 33 ft. - 56 ft. (.1 m - 17.1 m) folding lattice swingaway extension offsettable at 0, 25 or. Stows alongside base boom section. Maximum Tip Height: 172.5 ft. (52.6 m) *Optional Lattice Extension 33 ft. (.1 m) lattice swingaway extension, offsettable at 0, 25 or. Stows alongside base boom section. Maximum Tip Height: 148 ft. (.1 m). *Optional 20 ft. (6.1 m) or ft. (12.2 m) Swingaway Extension Inserts Installs between boom nose and extension, non-stowable. Maximum Tip Height: 192 ft. (58.5 m) - 20 ft. (6.1 m) insert 212 ft. (64.6 m) - ft. (12.2 m) insert Boom Nose Quick reeving type boom nose with 3 nylatron sheaves (4 for ton rating) mounted on heavy duty tapered roller bearings with removable pin-type rope guards. Removable auxiliary boom nose with removable pin type rope guard. Boom Elevation One double acting hydraulic cylinder with integral holding valve provides elevation from -3 to 78. Load Moment & Anti-Two Block System Standard Graphics Display load moment and anti-two block system with audio-visual warning and control lever lockout. These systems provide electronic display of boom angle, boom length, radius, tip height, relative load moment, maximum permissible load, load indication and warning of impending twoblock condition. The standard Work Area Definition System allows the operator to pre-select and define safe working areas. If the crane approaches the pre-set limits, audio-visual warnings aid the operator in avoiding job-site obstructions. Swing Planetary swing with foot applied multi-disc wet brake. Spring applied, hydraulically released parking brake. Two position plunger type and 3 mechanical house locks operated from cab. Maximum speed: 2.0 RPM. Counterweight 11,000 lbs. (4 9 kg) consisting of (2) 5,0 lb. (2 4 kg) sections. *Optional Heavy Lift package consisting of (1) additional 5,0 lb. (2 4 kg) section, for a total of 16,0 lb. (7 484 kg). Hydraulic installation/removal. Hydraulic System Four main gear pumps with a combined capacity of 1.4 GPM (513 L/m). Individual post pressure compensated valve banks. Maximum operating pressure: 00 psi (27.6 Mpa). Return line type filter with full flow by-pass protection and service indicator. Replaceable cartridge with beta rating of 5/12/16. 1 gallons (643 L) reservoir. Remote mounted oil cooler with thermostatically controlled electric motor driven fan. Hoist Specifications Main and Auxiliary Hoists-Model HO3OG-16G Planetary reduction with integral automatic brake, electronic hoist drum rotation indicator, and hoist drum cable follower. Grooved drum. Single Line Pull: Maximum Single Line Speed: Maximum Permissible Line Pull: Rope Diameter: 1st Layer: 18,134 lb. (8 226 kg) 3rd Layer: 15,420 lb. (6 9 kg) 5th Layer: 13,413 lb. (6 084 kg) 5 FPM (177 m/min) 16,0 lb. (7 620kg) w/standard 6 x 37 class rope 16,0 lb. (7 620 kg) w/optional x 7 class rope 3/4 in. (19 mm) 3 Cab High visibility, all steel cab with acoustical lining and tinted safety glass throughout. Deluxe seat with armrest mounted hydraulic single axis controls. Dash panel incorporates gauges for all engine functions. Other standard features include: sliding side and rear windows, hot water heat, electric windshield wash/wipe, circulating air fan, sliding skylight with sunscreen and electric skylight wiper, fire extinguisher, cup holder. Rope Length: 0 ft. (152 m) Rope Type: 6 x 36 WS non-rotation resistant Optional x 7 rotation resistant Maximum Rope Stowage: 6 ft. (212 m) *Denotes optional equipment TMS0E
specifications 4 Carrier Chassis Triple box section, four-axle carrier, fabricated from highstrength, low alloy steel with towing and tie-down lugs. Outrigger System Four hydraulic telescoping, single stage, double box beam outriggers with inverted jack and integral holding valves. Quick release type steel outrigger floats 24 in. (6 mm) diameter. Three position setting with fully extended, intermediate (%) extended and fully retracted capacities. Outrigger Controls Located in the superstructure cab and on the left side (umbilical design), requires two hand operation. Crane level indicator (sight bubble) on right side console. *Optional controls in lighted boxes, mounted on both sides of chassis. Engine Cummins ISM 4 diesel, six cylinders, after cooled, 661 cu. in. (.8 L), 4 bhp (336 kw) @ RPM. Maximum torque 1,4 ft. lb. (1966 Nm) @ 1200 RPM. Equipped with engine brake, engine block heater, cold start aid (less canister) and audiovisual engine distress system. Fuel Tank Capacity gallons (379 L). *Optional Tires Front: 4/R 22.5 Bridgestone M844F, tubeless. 4/R 22.5 Michelin XZY (WB), tubeless. Rear: 315/R 22.5 Bridgestone M843, tubeless. 315/R 22.5 Michelin XZY-2 tubeless. Lights Full lighting package including turn indicators, head, tail, brake, and hazard warning lights. Cab One man design, all steel fabricated with acoustical lining and tinted safety glass throughout. Deluxe fabric covered, fully adjustable air ride seat. Complete driving controls and engine instrumentation including tilt telescope steering wheel, tachometer, speedometer, voltmeter, water temp., oil pressure, fuel level, air pressure gauge with A/V warning and engine high temp./low oil pressure A/V warning. Other standard items include hot water heater/defroster, electric windshield wash/wipe, fire extinguisher, seat belt and door lock. Electrical System Two 12V, 21 CCA maintenance free batteries. 12V lighting/starting. Battery disconnect standard equipment. Maximum Speed MPH (4 kph) Transmission Roadranger 11 speeds forward, 3 reverse. % Gradeability (Theoretical) TMS0E Drive Drive 8 x 4 x 4. Steering Front axle, single circuit, mechanical steering with hydraulic assist. Axles Front: (2) beam-type steering axles, 83.3 in. (2.1 m) track. Rear: (2) single reduction drive axles,.1 in. (1.9 m) track. Inter-axle differential lock. Brakes Dual air, split system operating on all wheels. S-cam brakes on the front and wedge brakes on the rear. Spring-applied, air released parking brake acting on rear axles. Air dryer. Suspension Front: Walking beam with air bags and shock absorbers. Rear: Walking beam with air bags and shock absorbers. Tires Front: 4/R 22.5 Goodyear G286, tubeless, mounted on aluminum disc wheels. Rear: 315/R 22.5 Goodyear G286, tubeless, mounted on aluminum disc wheels. Miscellaneous Standard Equipment Aluminum fenders with rear storage compartments; dual rear view mirrors; electronic back-up alarm; pump disconnect; tire inflation kit; air cleaner restriction indicator; block and ball stowage; and chrome package which includes aluminum wheels. *Optional Equipment *Flashing Light Package includes amber strobe for both cabs *Trailing Boom Package includes trailer air and electrical disconnects and trailing boom kit with no spin differential (less dolly) *Hookblocks *Air conditioning *Rear pintle hook *Aluminum outrigger pads *Cross axle differential locks *LMI calibration for on-rubber *LMI light bar *LMI data logger *Air horn *Denotes optional equipment
dimensions 8' 6.00" (2591 mm) ' 1.00" (13741) STEERING RADIUS 13' 5." (42 mm) TAILSWING 6' 2." (1891 mm) REAR TRACK 20' 00" (96 mm) FULLY EXTENDED 13' 11.78" (4262 mm) MID EXTENDED 7' 11.62" (2429 mm) FULLY RETRACTED 5 6' 9.84" (2079 mm) FRONT TRACK 44' 5." (137 mm) ' 11" (9 mm) RETRACTED 1' 0" (3 mm) EXTENDED C L ROTATION 13' 5." (42 mm) 11' 9.18" (86 mm) 5' 9.25" (19 mm) 1' 7.52" (496 mm) 6'.92" (26 mm) 19 DEGREES 1' 9.83" (5 mm) 11.87 (1 mm) 15 DEGREES 11' 5.12" (3483 mm) 2' 1.00" (6 mm) 13' 2.00 (13 mm) 36' 6.87" (11147 mm) 5' 00" (1524 mm) 18' 6.00" (5639 mm) 8' 2.00" (2489 mm) 5' 0.00" (1524 mm) ' 2.00" (99 mm) 1' 9" (533 mm).00" (254 mm) 1. 5,0 lb. 2. 5,0 lb. 3. 5,0 lb. Counterweight Configuration Zero 5,0 lb. (2 4 kg) 11,000 lb. (4 9 kg) 16,0 lb. (7 4 kg) 1 2 3 Main Boom 33 ft. Swingaway 56 ft. Swingaway 76 ft. Boom extension (56 ft. + 20 ft. insert) 96 ft. Boom extension (56 ft. + ft. insert) Load Chart Configuration 3 o 16,0 lb. 11,000 lb. 5,0 lb. 0 lb. TMS0E Outrigger Span 20 ft. = 14 ft. = 8 ft. = Rubber P&C =
travel proposals Sub title Boom over front 6 18.5' (5639) 5' 5' (1 524) (1 524) Unit Configuration lb. (kg) Gross Basic machine including 1 ft. (33.5 m) main boom, main and auxiliary hoists with cable, driver and no counterweight. Additions: 5,0 lb. (2 4 kg.) counterweight pinned on superstructure 11,000 lb. (4 9 kg.) counterweight pinned on superstructure 16,0 lb. (7 4 kg.) counterweight pinned on superstructure 5,0 lb. (2 4 kg.) counterweight stowed on carrier deck 11,000 lb. (4 9 kg.) counterweight stowed on carrier deck Swingaway carrier brackets 33 ft. (.1 m) swingaway 33-56 ft. (.1-17.1 m) swingaway Auxiliary boom nose ton ( mt) hookblock stowed in trough ton ( mt) hookblock stowed in trough ton ( mt) hookblock stowed in trough 8.3 ton (7.5 mt) headache ball stowed in trough Air conditioning superstructure cab Air conditioning chassis cab Front Rear 74,712 (33 889) 37,097 (16 827) 37,615 (17 062) 5,0 11,000 16,0 5,0 11,000 3 1,7 2,4 1 0 1,000 1,2 371 2 88 (2 4) -2,214 (1 004) 7,714 (3 499) (4 9) -4,428 (2 009) 15,428 (6 998) (7 484) -6,642 (3 013) 23,142 ( 497) (2 4) 4,692 (2 128) 8 (367) (4 9) 9,384 (4 257) 1,616 (733) (1) 282 (128) 48 (22) (7) 1,972 (8) -242 (-1) (1 125) 2,2 (1 1) -22 (-) 251 (114) -121 (-) (363) 1,142 (518) -342 (-1) (4) 1,428 (648) -428 (-194) (567) 1,7 (8) -5 (-243) (168) 5 (2) -159 (-72) (129) (5) 2 (125) 115 (52) -27 (-12) Trailing boom dolly 57.6' (17 6) 18.5' TMS0E (5639) 5' 5' 13' 4.5' (1524) (1524) (3962) (1372) Unit Configuration lb. (kg.) Basic machine including 1 ft. (33.5 m) main boom, main and auxiliary hoists with cable, driver, no counterweight and 6,000 lb. (2 722 kg.) tandem axle dolly. Additions: 5,0 lb. (2 4 kg.) counterweight stowed on carrier deck. 11,000 lb. (4 9 kg.) counterweight stowed on carrier deck. 33 ft. (.1 m) swingaway with brackets. 33-56 ft. (.1-17.1 m) swingaway with brackets. Auxiliary boom nose. ton ( mt) hookblock hanging at boom nose. ton ( mt) hookblock hanging at boom nose. ton ( mt) hookblock hanging at boom nose. 8.3 ton (7.5 mt) headache ball hanging at boom nose. Gross Front Rear Dolly,737 (36 622) 33,479 (15 186) 29,2 (13 279) 17,983 (8 157) (2 4) 4,692 (2 128) 8 (367) 0 (0) 11,000 (4 9) 2,0 (934) 2,8 (1 2) 1 0 (363) 1,000 (4) 1,2 (567) 371 (168) 5,0 9,384 281 384-24 -126-157 -197-58 (4 257) (128) (174) (-11) (-57) (-71) (-89) (-26) 1,616 239 326-20 -7-134 -167 - (733) (8) (148) (-9) (-49) (-61) (-76) (-23) 0 1,5 2, 174 1,033 1,291 1,614 479 (0) (699) (3) (79) (469) (586) (732) (217)
working range 36-1' main boom + 33-56' lattice extension (BOOM DEFLECTION NOT SHOWN) 7 1 56' EXT 1 1 33' EXT 1 1 1 120 o 1 1 o HEIGHT FROM GROUND IN FEET 20 o o o o 36 BOOM LENGTH AND EXTENSION IN FEET 20 o 78 o MAX. BOOM ANGLE 0 o 0 1 1 1 1 120 1 20 0 AXIS OF ROTATION OPERATING RADIUS IN FEET FROM AXIS OF ROTATION 8'-2-3/4" 8'-6-3/4" Dimensions are for largest Grove furnished hook block and headache ball, with anti-two block activated. TMS0E
load charts 8 36-1 ft. 16,0 lbs. % 3º Feet ** 1 120,000 84,0,200 *62,0 12,000 84,0,200 62,0 *36,0 15 87,0 82,0,200 61,000 36,0 *36,0 *31,000 () (76.5) 20 68,2,000 64,0,6 36,0 36,0 31,000 *29, *24,000 (49) () 25 54,0 53, 52,000 41,0 36,0 34,000,000 27,000 24,000 (36) 39,3 38,0 37,8 33,0 29,000 25,0 24,200 22,000 (57.5) (.5) 29,0 28,0 28,0 25,000 22,200 21,7 20,000 (51.5) 23,0 22, 22,7 22,000 20,200 19,000 18,0 (28) (53) 17,5 18,2 18,0 17,0 17,0 17,0 (37) (47.5) (54.5) 14,0 14,8 15,0 16,000 16,000 16,000 (26.5) (41) (49.5) (.5) 12,200 12,9 13,6 14, 14, (33.5),0,8 11,0 12,000 12,200 (24) (38.5) (47) (57) 9,1 9,0,2,0 (42) 7,6 8,4 8,820 9,000 (22.5) (36.5) () 7,2 () 7,5 7,0 (46.5) 6,1 6,4 6,0 (21.5) (34.5) 5,5 5,0 (28.5) (38) 4,7 (20.5) 5,000 (33) 4,2 (27.5) 3,0 (19.5) Minimum boom angle (deg.) for indicated length (no load) 0 Maximum boom length (ft.) at 0 degree boom angle (no load) 1 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Angle ** 1 0 o 29,0 24,4 17,0 11,0 8,5 6,6 5,3 4,120 3,1 (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (4.2) NOTE: ( ) Reference radii in feet. A6-829-1318 ** ft. boom length is with inner-mid extended and outer-mid & fly retracted. #0001 TMS0E 36-1 ft. 16,0 lbs. % Over Rear #0001 Feet ** 1 120,000 84,0,200 *62,0 12,000 84,0,200 62,0 *36,0 15 87,0 82,0,200 61,000 36,0 *36,0 *31,000 () (76.5) 20 68,2,000 64,0,6 36,0 36,0 31,000 *29, *24,000 (49) () 25,6 53, 52,000 41,0 36,0 34,000,000 27,000 24,000 (36) 44, 39,0 38,000 33,0 29,000 25,0 24,200 22,000 (57.5) (.5) 32,0 29,7 28,0 25,000 22,200 21,7 20,000 (51.5) 26,0 25,0 23,0 22,000 20,200 19,000 18,0 (28) (53) 20,000 19,0 18,0 17,0 17,0 17,0 (37) (47.5) (54.5) 17,8 16,0 16,0 16,000 16,000 16,000 (26.5) (41) (49.5) (.5) 14,0 14,6 14, 14, 14, (33.5) 13,0 12,0 12,200 12,200 12,200 (24) (38.5) (47) (57) 11,4,0,0,0 (42), 9,4 9,000 9,000 (22.5) (36.5) () 8,2 () 7,0 7,0 (46.5) 7,1 6,0 6,0 (21.5) (34.5) 5,0 5,0 (28.5) (38) 5,000 (20.5) 5,000 (33) 4,4 (27.5) 3,8 (19.5) Minimum boom angle (deg.) for indicated length (no load) 0 Maximum boom length (ft.) at 0 degree boom angle (no load) 1 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Angle ** 1 0 o 29,0 24,4 17,0 11,9 9,6 7,8 6,3 4,7 3,3 (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (4.2) NOTE: ( ) Reference radii in feet. A6-829-1319 ** ft. boom length is with inner-mid extended and outer-mid & fly retracted.
load charts 36-1 ft. 33-56 ft. 16,0 lbs. % Pounds 3º 33 ft. LENGTH 56 ft. LENGTH #0021 #0022 #0023 #0041 #0042 #0043 Feet 0 o o 0 o o 12,0 12,0 *8,3 12,0 *,8 8,3 12,0,4 *7,4 8,3 12, (),000 (74.5) 7,200 8,3 (74.5) 11, 9,220 6,9 8,2 (73) *5,0, (66) 8,5 (.5) 6,0 7,5 5,1 9,1 7,9 6,6 (.5) 7,1 5, *3,8 8,4 (61.5) 7,3 6,4 6,820 (67.5) 5, (73) 3,7 7,8 6,0 6,3 6,0 4,0 3,6 7,2 6,4 (.5) 6,1 (62.5) 5,8 4,5 3,5 (73) 6,4 6,0 5,7 5,3 4,4 3,4 (54) (61.5) (67.5) 5,6 5,720 5,4 4,9 4,3 3,4 (.5) (57) 4,9 5,0 5,200 4,6 4,0 3,0 (54) (57) 4,3 4,8 4,9 4,320 3,8 3,2 (.5) (49.5) () (61) (64) 5 3,7 4,2 4,4 4,0 3,620 3,220 (46.5) (47.5) (58.5) (62) 1 3,2 3,6 3,7 3,4 3,1 (39.5) (43) (.5) (56) 115 2,8 3,1 3,2 3,2 3,0 (36) (39.5) (48) 120 2,420 2,6 2,8 3,0 2,9 (32) () (.5) 125 2,0 2,2 2,4 2,8 2,0 (27.5) (.5) (.5) 1 1,0 2,120 2,5 (22) (39.5) (.5) 1 1,7 2,200 (36.5) 1 1,4 1,8 (33) (38.5) 1 1,200 1,0 (29.5) (34.5) No Load Stability Data Min. boom angle for indicated length 21 o o 28 o 28 o o Max. boom length at 0 o boom angle ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-1337 *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension. 2. 33 ft. and 56 ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 9 TMS0E
load charts 36-1 ft. 11,000 lbs. % 3º Feet ** 1 120,000 84,0,200 *62,0 12,000 84,0,200 62,0 *36,0 15 87,0 82,0,200 61,000 36,0 *36,0 *31,000 () (76.5) 20 68,2,000 64,0,6 36,0 36,0 31,000 *29, *24,000 (49) () 25 48,5 48,3 47,6 41,0 36,0 34,000,000 27,000 24,000 (36) 34,0 33,6 32,0 (57.5) 33,0 29,000 25,0 (.5) 24,200 22,000 25,2 24,3 25,000 25,000 22,200 21,7 20,000 (51.5) 19,0 18,0 19,3 20,0 20,200 19,000 18,0 (28) (53) 14,6 15,3 16,0 16,7 17,0 17,0 (37) (47.5) (54.5) 11,5 12,3 13,0 13,7 14,0 14,8 (26.5) (41) (49.5) (.5) 9,9 (33.5),0 11,4 11,0 12,0 8,0 8,8 9,5,000,0 (24) (38.5) (47) (57) 7,2 8,0 8,4 8,8 (42) 5,9 6,7 7,1 7,4 (22.5) (36.5) () 5,6 6,020 6,3 () (46.5) 4,7 5,0 5,3 (21.5) (34.5) 4,200 4,5 (28.5) (38) 3,4 (20.5) 3,7 (33) 3,0 (27.5) 2,4 (19.5) Minimum boom angle (deg.) for indicated length (no load) 0 Maximum boom length (ft.) at 0 degree boom angle (no load) 1 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Angle ** 1 0 o 29,0 24,4 16,000 9,3 6,7 5,0 4,020 2,920 2,0 (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (4.2) NOTE: ( ) Reference radii in feet. A6-829-1320 ** ft. boom length is with inner-mid extended and outer-mid & fly retracted. #01 TMS0E 36-1 ft. 11,000 lbs. % Over Rear #01 Feet ** 1 120,000 84,0,200 *62,0 12,000 84,0,200 62,0 *36,0 15 87,0 82,0,200 61,000 36,0 *36,0 *31,000 () (76.5) 20 68,2,000 64,0,6 36,0 36,0 31,000 *29, *24,000 (49) () 25 52,0 52,0 52,000 41,0 36,0 34,000,000 27,000 24,000 (36) 41,7 39,0 38,000 (57.5) 33,0 29,000 25,0 (.5) 24,200 22,000 32,0 29,7 28,0 25,000 22,200 21,7 20,000 (51.5) 26,0 25,0 23,0 22,000 20,200 19,000 18,0 (28) (53) 20,000 19,0 18,0 17,0 17,0 17,0 (37) (47.5) (54.5) 16,6 16,0 16,0 16,000 16,000 16,000 (26.5) (41) (49.5) (.5) 14,0 (33.5) 14,6 14, 14, 14, 12, 12,0 12,200 12,200 12,200 (24) (38.5) (47) (57),9,0,0,0 (42) 9,2 9,4 9,000 9,000 (22.5) (36.5) () 8,2 7,0 7,0 () (46.5) 7,1 6,0 6,0 (21.5) (34.5) 5,0 5,0 (28.5) (38) 5,000 (20.5) 5,000 (33) 4,4 (27.5) 3,8 (19.5) Minimum boom angle (deg.) for indicated length (no load) 0 Maximum boom length (ft.) at 0 degree boom angle (no load) 1 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Angle ** 1 0 o 29,0 24,4 17,0 11,9 9,6 7,8 6,3 4,7 3,3 (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (4.2) NOTE: ( ) Reference radii in feet. A6-829-1321 ** ft. boom length is with inner-mid extended and outer-mid & fly retracted.
load charts 36-1 ft. 33-56 ft. 11,000 lbs. % Pounds 3º 33 ft. LENGTH 56 ft. LENGTH #0121 #0122 #0123 #0141 #0142 #0143 Feet 0 o o 0 o o 12,0 12,0 *8,3 12,0 *,8 8,3 12,0,4 *7,4 8,3 12, (),000 (74.5) 7,200 8,3 (74.5) 11, 9,220 6,9 8,2 (73) *5,0, (66) 8,5 (.5) 6,0 7,5 5,1 9,1 7,9 6,6 (.5) 7,1 5, *3,8 7,9 (61.5) 7,3 6,4 6,820 (67.5) 5, (73) 3,7 6,8 6,0 6,3 6,0 4,0 3,6 5,9 6,4 (.5) 6,1 (62.5) 5,8 4,5 3,5 (73) 5,120 (54) 5,8 5,7 5,3 (61.5) 4,4 (67.5) 3,4 4,4 5,0 (.5) 5,4 (57) 4,9 4,3 3,4 3,7 4,3 4,6 (54) 4,3 (57) 4,0 3,0 3,2 (.5) 3,7 (49.5) 4,0 3,7 () 3,8 (61) 3,2 (64) 5 2,7 3,1 3,4 3,2 3,620 3,220 (46.5) (47.5) (58.5) (62) 1 2,2 (39.5) 2,6 (43) 2,7 (.5) 3,4 (56) 3,1 115 1,8 (36) 2,1 (39.5) 2,3 (48) 3,020 3,0 120 1,0 (32) 1,7 () 1,9 (.5) 2,5 2,0 125 1,1 (27.5) 1,3 (.5) 1,5 2,1 2,3 (.5) 1 1,2 (39.5) 1,7 (.5) 1 1,3 1 1,0 (38.5) No Load Stability Data Min. boom angle for indicated length o 33 o 36 o o Max. boom length at 0 o boom angle ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-1338 *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension. 2. 33 ft. and 56 ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 11 TMS0E
load charts 12 36-1 ft. 5,0 lbs. % 3 o Feet ** 1 118,0 84,0,200 *62,0 12,000 84,0,200 62,0 *36,0 15 87,0 82,0,200 61,000 36,0 *36,0 *31,000 () (76.5) 20 66,000 (49),000 () 64,0,6 36,0 36,0 31,000 *29, *24,000 25 41, 41,000,0,1 36,0 34,000,000 27,000 24,000 (36) 28,0 28,1 27,7 28,4 29,000 25,0 24,200 22,000 (57.5) (.5) 20,0 20,0 21,000 21,7 22,200 21,7 20,000 (51.5) 15,0 15,3 16,0 16,7 17,0 17,0 18,0 (28) (53) 11,7 (37) 12,0 (47.5) 13,200 (54.5) 13,9 14,0 14,0 9,0 9,8,5 11,2 11,6 12,000 (26.5) (41) (49.5) (.5) 7,720 8,0 9,2 9,5 9,9 (33.5) 6,0 6,8 7,5 7,0 8,2 (24) (38.5) (47) (57) 5,4 6,1 6,5 6,8 (42) 4,2 5,020 5,0 5,7 (22.5) (36.5) () 4,0 4,420 4,7 () (46.5) 3,1 3,5 3,9 (21.5) (34.5) 2,8 3,200 (28.5) (38) 2,1 2,5 (20.5) (33) 1,9 (27.5) 1,4 (19.5) Minimum boom angle (deg.) for indicated length (no load) 0 Maximum boom length (ft.) at 0 degree boom angle (no load) 1 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Angle ** 1 0 o 28,8 21,0 12,0 7,0 4,8 3,4 2,5 1,7 1,0 (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (4.2) NOTE: ( ) Reference radii in feet. A6-829-1322 ** ft. boom length is with inner-mid extended and outer-mid & fly retracted. #0201 TMS0E 36-1 ft. 5,0 lbs. % Over Rear #0201 Feet ** 1 120,000 84,0,200 *62,0 12,000 84,0,200 62,0 *36,0 15 87,0 82,0,200 61,000 36,0 *36,0 *31,000 () (76.5) 20 66,000,000 64,0,6 36,0 36,0 31,000 *29, *24,000 (49) () 25,0 49,8 49,0 41,0 36,0 34,000,000 27,000 24,000 (36) 38, 38,200 38,000 (57.5) 33,0 29,000 25,0 (.5) 24,200 22,000 28,0 28,0 28,0 25,000 22,200 21,7 20,000 (51.5) 22,200 22,200 23,000 22,000 20,200 19,000 18,0 (28) (53) 17,0 18,0 18,0 17,0 17,0 17,0 (37) (47.5) (54.5) 14, 14,9 15,7 16,000 16,000 16,000 (26.5) (41) (49.5) (.5) 12,2 (33.5) 13,0 13,0 14, 14,,0,0 11,6 12,000 12,200 (24) (38.5) (47) (57) 9, 9,8,200,5 (42) 7,5 8,3 8,7 9,000 (22.5) (36.5) () 7, 7,4 7,0 () (46.5) 5,9 6,3 6,0 (21.5) (34.5) 5,4 5,7 (28.5) (38) 4,5 (20.5) 4,920 (33) 4,1 (27.5) 3,520 (19.5) Minimum boom angle (deg.) for indicated length (no load) 0 Maximum boom length (ft.) at 0 degree boom angle (no load) 1 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Angle ** 1 0 o 29,0 24,4 17,0 11,0 8,5 6,520 5,1 3,9 3,020 (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (4.2) NOTE: ( ) Reference radii in feet. A6-829-1323 ** ft. boom length is with inner-mid extended and outer-mid & fly retracted.
load charts 36-1 ft. 33-56 ft. 5,0 lbs. % 3º Pounds 33 ft. LENGTH 56 ft. LENGTH #0221 #0222 #0223 #0241 #0242 #0243 Feet 0 o o 0 o o 12,0 12,0 *8,3 12,0 *,8 8,3 12,0,4 *7,4 8,3 12, (),000 (74.5) 7,200 8,3 (74.5),4 9,220 6,9 8,2 (73) *5,0 8,7 (66) 8,5 (.5) 6,0 7,5 5,1 7,420 7,9 6,6 (.5) 7,1 5, *3,8 6,2 (61.5) 7,2 6,4 6,820 (67.5) 5, (73) 3,7 5,3 6,1 6,3 6,0 4,0 3,6 4,4 5,2 5,8 5,1 4,5 3,5 (.5) (62.5) (73) 3,7 4,4 4,9 4,0 4,4 3,4 (54) (61.5) (67.5) 3,1 3,7 4,1 3,7 4,3 3,4 (.5) (57) 2,5 3,1 3,4 3,1 4,0 3,0 (54) (57) 2, 2,5 2,8 2,620 3,5 3,2 (.5) (49.5) () (61) (64) 5 1,6 2,0 2,3 2,1 3,0 3,220 (46.5) (47.5) (58.5) (62) 1 1,2 1,6 1,7 2,520 2,8 (39.5) (43) (.5) (56) 115 1,2 1,3 2,0 2,3 (39.5) (48) 120 1,0 1,6 1,8 (.5) 125 1,2 1,4 (.5) No Load Stability Data Min. boom angle for indicated length 37 o 37 o o o 46 o 48 o Max. boom length at 0 o boom angle ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-1339 *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension. 2. 33 ft. and 56 ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 13 TMS0E
load charts 14 36-1 ft. 0 lbs. % 3º Feet ** 1 117,0 84,0,200 *62,0 12,000 84,0,200 62,0 *36,0 15 87,0 82,0,200 () 61,000 36,0 (76.5) *36,0 *31,000 20 56,000,7,0,6 36,0 36,0 31,000 *29, *24,000 (49) () 25 34,3 34,0 33,8 33,0 34, 34,000,000 27,000 24,000 (36) 23,3 23, 22,0 (57.5) 23,0 24,1 24,8 (.5) 24,200 22,000 16,6 16,2 16,9 17,0 18,0 18,8 19,0 (51.5) 12,2 (28) 12,000 12,6 (53) 13,0 14, 14,5 14,9 8,8 9,620,0 11,0 11,4 11,0 (37) (47.5) (54.5) 6,5 7,3 8,0 8,7 9,1 9,5 (26.5) (41) (49.5) (.5) 5,4 (33.5) 6,2 6,9 7,320 7,6 3,9 4,7 5,5 5,8 6,2 (24) (38.5) (47) (57) 3,5 4,3 4,0 5,0 (42) 2,5 (22.5) 3,3 (36.5) 3,7 4,0 () 2,4 2,8 3,220 () (46.5) 1,7 (21.5) 2,1 (34.5) 2,0 1,4 1,8 (28.5) (38) 1,2 (33) Minimum boom angle (deg.) for indicated length (no load) 14 26 Maximum boom length (ft.) at 0 degree boom angle (no load) NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Angle ** 0 23,0 17,6 9,5 4,8 2,9 1,8 1,2 (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) NOTE: ( ) Reference radii in feet. A6-829-1324 ** ft. boom length is with inner-mid extended and outer-mid & fly retracted. #01 TMS0E 36-1 ft. 0 lbs. % Over Rear #01 Feet ** 1 120,000 84,0,200 *62,0 12,000 84,0,200 62,0 *36,0 15 87,0 82,0,200 61,000 36,0 *36,0 *31,000 () (76.5) 20 62,0 62,200 61,0,6 36,0 36,0 31,000 *29, *24,000 (49) () 25 47,2 47,0 46,0 41,0 36,0 34,000,000 27,000 24,000 (36) 32,9 33, 33,0 33,0 29,000 25,0 24,200 22,000 (57.5) (.5) 24,0 24,0 25,3 25,000 22,200 21,7 20,000 (51.5) 18,0 18,7 19,0 20,4 20,200 19,000 18,0 (28) (53) 14,6 15,0 16,0 17, 17,0 17,0 (37) (47.5) (54.5) 11,5 12,0 13,200 14,000 14,3 14,7 (26.5) (41) (49.5) (.5) 9,9,0 11,5 11,0 12,0 (33.5) 8,020 8,8 9,620 9,9,0 (24) (38.5) (47) (57) 7,2 8,0 8,3 8,720 (42) 5,8 6,6 7,0 7,3 (22.5) (36.5) () 5,520 () 5,9 6,2 (46.5) 4,5 4,9 5,2 (21.5) (34.5) 4,0 4,4 (28.5) (38) 3,0 (20.5) 3,6 (33) 2,9 (27.5) 2,3 (19.5) Minimum boom angle (deg.) for indicated length (no load) 0 Maximum boom length (ft.) at 0 degree boom angle (no load) 1 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Angle ** 1 0 o 29,0 24,4 15,2 9,320 6,6 4,9 3,820 2,7 1,9 (29.8) (34.2) (44.2) (54.6) (64.2) (74.2) (84.2) (94.2) (4.2) NOTE: ( ) Reference radii in feet. A6-829-1325 ** ft. boom length is with inner-mid extended and outer-mid & fly retracted.
load charts 36-1 ft. 33-56 ft. 0 lbs. % Feet 5 1 115 Pounds 3º 33 ft. LENGTH 56 ft. LENGTH #0821 #0822 #0823 #0841 #0842 #0843 0 o o 0 o o 12,0 12,0 *8,3 12,0 *,8 8,3 12,0,4 *7,4 8,3,3,000 7,200 8,3 () (74.5) (74.5) 8,5 9,220 6,9 8,2 *5,0 (73) 7,000 8,3 6,0 7,5 5,1 (66) (.5) 5,7 6,9 6,6 6,420 5, *3,8 (.5) 4,7 5,7 6,3 5,3 5, 3,7 (61.5) (67.5) (73) 3,8 4,7 5,3 4,4 4,0 3,6 3,1 3,920 4,3 3,7 4,5 3,5 (.5) (62.5) (73) 2,4 3,1 3,6 3,0 4,1 3,4 (54) (61.5) (67.5) 1,920 2,5 2,9 2,4 3,4 3,4 (.5) (57) 1,420 1,9 2,3 1,9 2,8 3,0 (54) (57) 1,4 1,7 1,0 2,3 2,9 (49.5) () (61) (64) 1,020 (46.5) 1,2 (47.5) 1,0 1,8 (58.5) 1,4 (56) 1,0 2,3 (62) 1,8 1,0 No Load Stability Data Min. boom angle for indicated 46 o o o 48 o 51 o 51 o length Max. boom length at 0 o boom angle ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-13 *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension. 2. 33 ft. and 56 ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 15 TMS0E
working range 16 36-1' main boom + 33-56' lattice extension + 20' or ' insert (BOOM DEFLECTION NOT SHOWN) 220 0 o 2 56' EXT. 200 1 o 33' EXT. 1 1 1 1 1 HEIGHT FROM GROUND IN FEET 1 120 1 o o o o o 1 BOOM LENGTH AND EXTENSION IN FEET 20 o 0 o 20 o 36 78 MAX. BOOM ANGLE 0 200 1 1 1 1 1 1 1 120 1 20 0 OPERATING RADIUS IN FEET FROM AXIS OF ROTATION AXIS OF ROTATION TMS0E 8' 3-3/4" 8'-6-3/4" Dimensions are for largest Grove furnished hook block and headache ball, with anti-two block activated.
load charts 36-1 ft. 33-56 ft. 20 ft. 16,0 lb. % 3º Pounds 33 ft. LENGTH 56 ft. LENGTH #0064 #00 #0066 #0084 #00 #0086 Feet 0 o o 0 o o *9,3 9,3 *6,0 8,4 *7,4 6,0 7,6 7,0 6,000 6,9 6,4 5,8 5,9 (.5) 6,3 () 5,9 5,4 (76.5) 5,9 *4,8 5,8 5,5 5,0 (74.5) 5,5 4,8 5,3 5,0 (.5) 4,7 5,0 (.5) 4,4 (76.5) 4,9 (64.5) 4,7 4,4 (.5) 4,5 4,0 *3,7 4,6 4,0 4,1 4,1 3,8 3,4 (62.5) (66) (73) 4,0 4,1 (64) 3,8 (66) 3,820 () 3,5 (71.5) 3,2 4,000 3,8 (62) 3,6 3,520 3,320 2,9 (73) 3,7 (56) 3,6 3,0 (61.5) 3,220 (61.5) 3,0 (67.5) 2,7 3,5 3,4 (57.5) 3,0 2,9 2,8 (66) 2,5 5 3,2 3,2 () 3, 2,7 2,6 (64) 2,4 1 3,0 3,020 2,9 (54) 2,5 (56) 2,4 (62) 2,3 () 115 2,8 (46) 2,8 () 2,7 2,3 (54) 2,2 2,200 120 2,5 (43.5) 2,7 (47) 2,1 (52) 2,1 (57.5) 2,0 (.5) 125 2,1 (.5) 2,0 (44) 2,000 (49.5) 1,9 (.5) 1,9 1 1,820 (37.5) 2, (41) 1,8 (47.5) 1,8 (53) 1,8 (.5) 1 1,0 1,7 1,720 1,7 1,6 (34.5) (37.5) (53) 1 1,2 (.5) 1,3 (33.5) 1,4 1,6 1 1,520 (.5) 1 1,3 (43) No Load Stability Data Min. boom angle at 1' boom length 22 o 29 o o 38 o o o Max. boom length at 0 o boom angle ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-1484 *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2. 33 ft. and 56 ft. folding boom extension lengths may be used for single line lifting service only. 3. For main boom lengths less than 1 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 17 TMS0E
load charts 18 36-1 ft. 33-56 ft. ft. 16,0 lb. % Feet 5 1 115 120 125 1 1 1 1 Pounds 3º 33 ft. LENGTH 56 ft. LENGTH #0064 #00 #0066 #0084 #00 #0086 0 o 6,5 5,9 5,3 (74.5) 4,8 (73) 4,3 3,9 3,6 (67.5) 3,2 (66) 2,9 (64) 2,7 (62.5) 2,4 (.5) 2,2 (58.5) 2,0 1,0 (54.5) 1,0 1,0 (.5) 1,4 (48) 1,3 (46) 1,120 (43.5) 1,0 (41) o 0 o 4,5 5,8 4,2 5,2 *5,1 3,9 (76.5) 4,8 4,6 3,7 (74.5) 4,3 4,2 3,4 (73) (.5) (73) 4,0 3,9 3,220 (71.5) (71.5) 3,6 3,6 2,820 () 3,3 3,3 2,520 () 3,0 3,0 2,320 (66) 2,8 2,8 2,0 (64) (66) () 2,5 2,6 1,8 (62) (64) 2,3 2,3 1,6 (62) (62) 2,1 2,200 1,4 2,000 2, 1,2 (56) (58.5) 1,0 1,9 1,1 (54) (.5) (57) 1,0 1,7 (51.5) (53) 1,5 1,520 (49.5) (.5) 1,420 1,420 (47) (48) 1,220 1,0 (41.5) No Load Stability Data *3,7 3,420 3,120 2,820 (74.5) 2,620 2,3 2,1 1,9 1,7 (66) 1,5 (64.5) 1,3 (62.5) 1,2 (61) 1,0 o 2,7 2,5 2,3 (74.5) 2,1 1,9 1,7 1,5 1,4 () 1,2 1,1 (61.5) Min. boom angle at 1' boom length o o 47 o 56 o 58 o o Max. boom length at 0 o boom angle ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-1494 *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2. 33 ft. and 56 ft. folding boom extension lengths may be used for single line lifting service only. 3. For main boom lengths less than 1 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. TMS0E
load handling Weight Reductions for Load Handling Devices 33 ft.-56 ft. Folding Boom Extension *33 ft. Extension (Erected) 4,3 lb. *56 ft. Extension (Erected) 9,4 lb. Folding Ext. with 20 ft. Insert *33 ft. Extension (Erected) 9,4 lb. *56 ft. Extension (Erected) 16,0 lb. Folding Ext. with ft. Insert *33 ft. Extension (Erected) 16,2 lb. *56 ft. Extension (Erected) 24,3 lb. *Reduction of main boom capacities (no deduct required for stowed boom extension) When lifting over swingaway and/or jib combinations, deduct total weight of all load handling devices reeved over main boom nose directly from swingaway or jib capacity. Line Pulls and Reeving Information Permissible Nominal Hoists Cable Specs. Line Pulls Cable Length 3/4" (19 mm) 6x37 Class, Main EIPS, IWRC Special Flexible 16,0 lb. 0 ft. Min. Breaking Strength 58,0 lb. 3/4" (19 mm) Flex-X Main & Aux. Rotation Resistant (Non-rotating) 16,0 lb. 0 ft. Min. Breaking Strength,0 lb. The approximate weight of 3/4" wire rope is 1.5 lb./ft. 19 Auxiliary Boom Nose 137 lb. Hoist Performance Hookblocks and Headache Balls: Ton, 5 Sheave 1,125 lb. + Ton, 5 Sheave 1,0 lb. + Ton, 5 Sheave 7 lb. + 8.3 Ton Headache Ball (non-swivel) 3 lb. + 8.3 Ton Headache Ball (swivel) 3 lb. + + Refer to rating plate for actual weight. NOTE: All load handling devices and boom attachments are considered part of the load and suitable allowances MUST BE MADE for their combined weights. Weights are for Grove furnished equipment. Wire Hoist Line Pulls Drum Rope Rope Two Speed Hoist Capacity (ft.) Layer Low High Available lb.* Available lb.* Layer Total 1 18,134 9,067 78 78 2 16,668 8,334 164 3 15,420 7,7 92 256 4 14,347 7,174 99 6 5 13,413 6,7 6 462 6 12,594 6,297 113 5 *Max. lifting capacity: 6x37 or x7 class = 16,0 lb. Working Area Diagram Bold lines determine the limiting position of any load for operation within working areas indicated. TMS0E
Manitowoc Crane Group - Americas Manitowoc, Wisconsin Facility Tel: [Int + 001] 920 684 6621 Fax: [Int + 001] 920 683 6277 Shady Grove, Pennsylvania Facility Tel: [Int + 001] 717 597 8121 Fax: [Int + 001] 717 597 62 Manitowoc Crane Group - EMEA Europe Middle East & Africa Tel: [Int + 33] (0) 191 5 6281 Fax: [Int + 33] (0) 4 72 18 20 20 Manitowoc Crane Group - UK Europe Middle East & Africa Tel: [Int + 44] (0) 191 5 6281 Fax: [Int + 44] (0) 191 564 0442 Manitowoc Crane Group - Germany (Sales, Parts & Service) Tel: [Int + 49](0) 2173 89 0 Fax: [Int + 49] (0) 2173 89- Manitowoc Crane Group - France France & Africa (Sales, Parts & Service) Tel: [Int + 33] (0) 1 3 131 Fax: [Int + 33] (0) 1 3 8 Manitowoc Crane Group - Netherlands (Sales, Parts & Service) Tel: [Int + 31] (0) 76 578 39 99 Fax: [Int + 31] (0) 76 578 39 78 Manitowoc Crane Group - Italy Italy & Southern Europe (Sales, Parts & Service) Tel: [Int + 39] (0) 331 49 33 11 Fax: [Int + 39] (0) 331 49 33 Manitowoc Crane Group - Portugal Portugal & Spain (Sales, Parts & Service) Tel: [Int + 1] (0) 22 968 08 89 Fax: [Int + 1] (0) 22 968 08 97 Manitowoc Crane Group - Singapore Asia/Pacific excl China (Sales, Parts & Service) Tel: [Int + ] 6861 1733 Fax: [Int + ] 6862 / 4142 Manitowoc Crane Group - Shanghai China (Sales, Parts & Service) Tel: [Int + 86] (0) 21 64 Fax: [Int + 86] (0) 21642038 Manitowoc Crane Group - Beijing China (Sales, Parts & Service) Tel: [Int + 86] (0) 646 716 Fax: [Int + 86] (0) 646 71691 Manitowoc Crane Group - Middle East (Sales) Tel: [Int + 971] (0) 4 348 4478 Fax: [Int + 971] (0) 4 348 4478 (Parts & Service) Tel: [Int + 973] (0) 9 6 899 Fax: [Int + 973] (0) 2 7 7 Distributed By: Constant improvement and engineering progress make it necessary that we reserve the right to make speicfication, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories, and may not include all standard equipment. www.manitowoccranegroup.com 04-1M Printed in USA Form No. TMS0E PG Part No. 00-024 Manitowoc Crane Group 2004