product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 8,4 lb. (3837 kg) heavy counterweight package Rear air suspension with shock absorbers 0 bhp (224 kw) Cummins diesel engine contents Features 2 Specifications 3 Dimensions 5 Counterweight Configurations 6 Working Range 7 Main Boom Charts 8 Telescopic Swingaway Charts 9 Standard Counterweight Charts 11 Light Counterweight Charts 15 Load Handling 19 Truck Mounted Crane
features 2 Rear air suspension over walking beams with shock absorbers makes a comfortable ride even at max speed of mph (105 Km/h) 26 ft. - ft. telescoping swingaway extension with offset up to maximizes up and over capacity. Standard aluminum rims save weight and add aesthetic value All steel fabricated superstructure cab has padded acoustical lining for sound suppression, safety glass and excellent visibility under close working conditions.
specifications Superstructure Boom 29 ft. - 95 ft. (8.8 m - 29 m) four-section, full power boom. Maximum Tip Height: 102.5 ft. (31.2 m). Telescopic Swingaway Extension 26 ft. - ft. (7.92 m - 13.7 m) telescoping offsettable swingaway extension. Offsettable at 0 and. Stows alongside base boom section. Maximum Tip Height: 146 ft. (44.5 m) Boom Nose Four nylatron sheaves mounted on heavy duty tapered roller bearings with removable pin-type rope guards. Quick reeve type boom nose. *Optional removable/stowable auxiliary boom nose with removable pin type rope guard. Boom Elevation One double-acting hydraulic cylinder with integral holding valve provides elevation from -3 to 76. Load Moment & Anti-Two Block System Standard Graphics Display load moment and anti-two block system with audio-visual warning and control lever lockout. These systems provide electronic display of boom angle, length, radius, tip height, counterweight, relative load moment, maximum permissible load, load indication and warning of impending two-block condition. The standard Work Area Definition System allows the operator to pre-select and define safe working areas. If the crane approaches the pre-set limits, audio-visual warnings aid the operator in avoiding job-site obstructions. Cab High vision, galvannealed steel fabricated with acoustical lining and tinted safety glass throughout. Deluxe seat incorporates armrest mounted hydraulic single-axis controllers. Dash panel incorporates gauges for all engine functions. Other standard features include: hot water heater, cab circulating air fan, sliding side and rear windows, sliding skylight with electric wiper, windshield wash/wipe, fire extinguisher, 12v power outlet, and seat belt. Swing Planetary swing with foot applied multi-disc brake. Spring applied, hydraulically released swing brake and plunger-type, one position, mechanical house lock operated from cab. 3 mechanical swing lock. Maximum speed: 3.0 RPM. Counterweight Standard, consisting of 2,0 lbs. (1 043 kg) on superstructure. Optional: 8,4 lbs. (3 837 kg) heavy counterweight package. Hydraulic System Two main gear pumps with a combined capacity of 127.7 GPM (483 L/m). Maximum operating pressure: PSI (26.2 MPa). Two individual valve banks. Return line type filter with full flow by-pass protection and service indicator. Replaceable cartridge with micron filtration rating of 2/20/. 96 gallon (363 L) reservoir. Oil cooler on carrier. System pressure test ports. Hoist Specifications Main and Auxiliary Hoists Model HP15B9-17G Planetary reduction with automatic spring applied multi-disc brake. Grooved drum. Electronic hoist drum rotation indicator and hoist drum cable followers. Maximum Single Line Speed: Maximum Permissible Line Pull: Rope Diameter: 429 FPM (131 m/min) 11,6 lb. (5 2kg) Standard 6 x 37 class rope 11,6 lb. (5 2kg) Optional x 7 class rope 5/8 in. (16 mm) Rope Length: 4 ft. (137 m) Rope Type: 6 x 37 class EIPS IWRC *Optional x 7 class rotation resistant Maximum Rope Stowage: 596 ft. (181 m) 3 *Denotes optional equipment
specifications 4 Carrier Chassis Box section frame fabricated from high-strength, alloy steel. Integral outrigger housings and front/rear towing and tie down lugs. Outrigger System Hydraulic single-stage, double box beam outriggers with front stabilizer and inverted jack design; equipped with integral holding valves. Three positions with fully extended, intermediate (%) extended and fully retracted settings. Steel fabricated, outrigger pads, 24 in. (610 mm) round. An aluminum, permanently stowed, front center stabilizer pad. Optional aluminum outrigger pads available in place of steel. Maximum outrigger pad load; 72,000 lbs. (32 9 kg) Outrigger Controls Located in the superstructure cab and on the left side (umbilical design), requires two hand operation. Crane level indicator (sight bubble) on right side console. Carrier mounted controls located on each side of the carrier for initial setup. Engine Cummins ISC0, six cylinder, turbocharged and after cooled diesel, 6 cu. in. (8.3L) 0 bhp (224 kw) @ 2,000 RPM. Maximum torque: 8 ft. lb. (1166 Nm) @ 1,0 RPM. Transmission Allison automatic with 6 speeds forward and 1 reverse. Fuel Tank Capacity gallons (227 L). Electrical System Two 12 V low maintenance batteries. 12 V system with 12 V headlights. Battery disconnect in battery box compartment. Drive 6 x 4 x 2. Steering Front axles, mechanical with hydraulic power assist controlled by steering wheel. Brakes S-cam, dual line air system operating on all wheels. Springapplied, air released parking brake acting on rear axles. Air dryer standard. Tires Standard Front: 425/R 22.5 radial highway treat tubeless singles. Standard Rear: 11R22.5 highway tread tube type duals. Suspension Front: Spring mounted single axle with shock absorbers. Rear: Air bag suspension with shock absorbers. Lights Full carrier lighting package including front and rear turn indicators, headlights and LED tail lights, brake and hazard warning lights. Cab One man design, galvannealed steel fabricated with acoustical lining and tinted safety glass throughout. Deluxe fabric covered, fully air adjustable seat with armrests. Complete driving controls and engine instrumentation including tilt telescope steering wheel, tachometer, speedometer, voltmeter, water temp., oil pressure, fuel level, dual air pressure gauges with A/V warning, engine high temp./low coolant A/V warning. Other standard items include: hot water heater/defroster, electric variable speed windshield washer and wiper, fire extinguisher, cab circulating fan, seat belt, door and window locks, and a 12V power outlet for cell phone or fax machine. Maximum Speed MPH (105 kph) Gradeability (Theoretical) 32% (Based on 52,000 lbs. [23 587 kg] GVW) Miscellaneous Standard Equipment Full length aluminum fenders, rear view mirrors, electronic back-up alarm, sling/tool box, electric controlled pump disconnect, auxiliary air supply, battery disconnect, air cleaner restriction indicator, block and ball stowage, aluminum front/rear wheels (outer rear only). Axles Front: (1) beam-type steering axle, 82.7 in. (2.10 m) track. Capacity: 21,000 lbs. (9 526 kg) Rear: (2) single reduction drive, 72.3 in. (1.84 m) track. Inter-axle differential lock. Capacity: 41,000 lbs. (18 598 kg) *Denotes optional equipment
dimensions STEERING RADIUS 34' 10" (10617mm) C L ROTATION 12' 0" TAILSWING (37 mm) 5 8' 4.0" (25 mm) 6' 10.69" (2100 mm) FRONT TRACK 6' 0.3" (1837 mm) REAR TRACK 7' 10" (23 mm) RETRACTED 14' (4267 mm) MID EXTEND 20' (96 mm) FULL EXTEND 36' 11.1" (11254 mm) 11' 4.3" (3462 mm) 11' 2.5" (3418 mm) 1' 6.02" (8 mm) 7' 4.4" (8 mm) 6.69" (1mm) 17 1' 8.89" 10' 10.2" (331 mm) (37 mm) 1' 9.00" (533 mm) 1' 5.19" 1' 1.18" (437 mm) (3 mm) C L FRONT AXLE 11' 11.2" (3639 mm) 2' 3.0" (686 mm) 8' 9.0" (2667 mm) 17' 8.0" (53 mm) 34' 7.5" (103 mm) C L REAR TANDEM 19 2' 3.0" (686 mm) 8' 0.0" (2438 mm) Weights Gross Front Axle Rear Axles Axle Allowable 62,000 (28 123 ) 21,000 (9 525 ) 41,000 (18 598 ) Unit Configuration lb. (kg.) Basic machine including 95 ft. main boom, main hoist with cable, Cummins/Allison drivetrain, driver and light 48,034 (21 788) 17,097 (7 5),937 (14 033) counterweight package. Additions: Standard counterweight package (includes IPO) 1,812 (822) -883 (-1) 2,695 (1 222) Heavy counterweight package (includes IPO) 7,972 (3 616) -1,0 (-4) 9,007 (4 086) 25 ton (22 mt) hookblock (front stowage) 5 (2) 5 (342) -205 (-93) 7.5 ton (6.8 mt)headache ball (front stowage) 369 (167) 8 (2) -139 (-63) 7.5 ton (6.8)headache ball (rear stowage, includes mount) 394 (178) -1 (-79) 569 (258) Swingaway carrier brackets (39) (18) (20) 26 ft. (7.9 m ) swingaway 1,0 (590) 1,006 (6) 294 (133) 26 - ft. (7.9-13.7 m ) telesco ping swingaway 1,790 (812) 1,1 (613) 439 (199) Auxiliary boom nose 114 (52) 1 () -51 (-23) Auxiliary hoist with ro pe 339 (154) -163 (-74) 2 (228) Air conditioning superstructure cab 205 (93) -47 (-21) 252 (114) Air conditioning chassis cab 81 (37) 94 (43) -13 (-6)
counterweight configurations 6 Heavy: Superstructure 00 lb. + 14 lb. Front Bumper with Aux. Hoist or in place of (IPO). Standard: Superstructure 20 lb. with Aux. Hoist or in place of (IPO). Light: Shell 12 lb. + No Front Bumper without Aux. Hoist or in place of (IPO). Counterweight Main Boom 26 ft. Swingaway 26- ft. Swingaway Load Chart Configuration Heavy Counterweight Standard Counterweight Light Counterweight Outrigger Span Rubber 20 ft. = P&C = 14 ft. = 7.8 ft. =
working range 29-95' main boom + 26-' lattice extension 1 (Boom Deflection Not Shown) 7 1 0 ' EXT. 1 1 26' EXT. 120 Height From Ground in 110 100 90 95 90 Boom Length and Extension in 20 29 20 10 76 MAX BOOM ANGLE 10 0 0 1 1 120 110 100 90 20 10 0 AXIS OF Operating Radius in From Axis of Rotation ROTATION 8' - 2" 7' - 8" Dimensions are for largest Grove furnished hook block and headache ball, with anti-two block activated.
8 8,4 lbs 100% 20' 0" 3º 8,4 lbs 100% 20' 0" Over Rear Main Boom Length in Main Boom Length in 9 10 12 15 20 25 29 90 95,000 (63),8 (61),0 46,0 32,7 (),100 (69.5) 46,9 (74.5),100 44,9 38,8 (72) (.5),0 41,0 36,000 29,4 *22,4 (68) (72.5) () 31,900 34,100 29,0 27,0 22,4 *18,5 *15,0 (52.5) (67) 24,000 25,0 24,0 23,100 19,2 16,0 15,0 (42.5) () (72.5) (74) 18,0 20,0 20,0 19,0 16,8 14,0 13,200 (29) (47) (66) (69) (.5) 15,5 15,8 16,000 14,8 12,0 11,0 (38) (49.5) (57) (.5) (67.5) 12,0 13,0 13,200 13,2 11,000 10,000 (26) (42.5) (51.5) (57.5) 10,900 10,900 10,900 9,6 9,0 (46) (53) (58) (.5) 8,990 9,020 9,0 8,7 7,990 (23.5) (39.5) (57) 7,5 7,5 7,6 7,100 (32) (43) () (53) 6,3 6,3 6,4 6,320 (22) (37) (.5) (49) 5,410 5,490 5,5 () (.5) (44.5) 4,5 4,6 4,0 (20.5) () () 3,9 4,000 (28.5) 3,3 3,0 (19.5) (28) 2,8 (19.5) Minimum boom angle ( o ) for indicated length 0 Maximum boom length (ft.) at boom angle 95 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 29 90 95 26,1 15,8 11,000 (22.8) (33.8) (43.8) NOTE: ( ) Reference radii in feet. 7,790 (53.8) 5,5 (63.8) 4,0 (73.8) 2,9 (83.8) 2,4 (89) A6-829-102810 29 90 95 9,000 (63) 10,8,100 46,9 (61) (69.5) (74.5) 12,0,100 44,9 (72) 38,8 (.5) 15 46,0,0 41,0 36,000 29,4 *22,4 (68) (72.5) () 20 32,7 () 31,900 (52.5) 34,100 29,0 (67) 27,0 22,4 *18,5 *15,0 25 24,000 25,0 24,0 23,100 19,2 16,0 15,0 (42.5) () (72.5) (74) 18,0 (29) 20,0 (47) 20,0 19,0 16,8 (66) 14,0 (69) 13,200 (.5) 15,5 15,8 16,000 14,8 12,0 11,0 (38) (49.5) (57) (.5) (67.5) 12,0 13,0 13,200 13,2 11,000 10,000 (26) (42.5) (51.5) (57.5) 10,900 11,100 (46) 11,200 (53) 9,6 (58) 9,0 (.5) 9,2 9,410 9,5 8,7 7,990 (23.5) (39.5) (57) 8,0 (32) 8,1 (43) 7,7 () 7,100 (53) 6,8 7,000 6,920 6,320 (22) (37) (.5) (49) 6,020 () 6,110 (.5) 5,6 (44.5) 5,190 5,2 5,0 (20.5) () () 4,5 (28.5) 4,5 3,9 3,9 (19.5) (28) 3,410 (19.5) Minimum boom angle ( o ) for indicated length 0 Maximum boom length (ft.) at boom angle 95 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 29 90 95 26,1 15,8 11,100 (22.8) (33.8) (43.8) NOTE: ( ) Reference radii in feet. 8,1 (53.8) 6,100 (63.8) 4,620 (73.8) 3,490 3,000 (83.8) (89) A6-829-102811
26 - ft. 8,4 lbs 100% 20' 0" 26 ft. LENGTH ft. LENGTH 3 o 9 o o * *5,2 *5,7 5,2 () 8,120 5,7 4,9 (68.5) (73) 7,3 5,3 4,5 (66) 6,3 (63.5) 4,7 (68) 4,1 (68.5) *2,7 5,6 4,290 3,890 2,7 (.5) () (74.5) 4,820 3,8 3,7 2,7 (57.5) (72) 4,200 3,5 3,0 2,5 (59) (69.5) 3,6 3,2 3,4 2,520 (51.5) (59) (67) 3,0 3,000 3,2 2,4 (48.5) (52.5) (56.5) 2,520 2,7 3,0 2,420 (49) (54) 90 2,0 (41) 2,0 2,820 (51) 2,390 (58.5) 95 1,6 2,0 2,520 2,3 (37) (.5) (.5) 100 1,3 1,6 2,1 2,310 (32.5) (.5) (52) 105 1,020 1,8 2,000 (27) (42) (48.5) 110 1,5 (38.5) 1,5 115 1,2 1,2 (.5) 120 1,000 (.5) Min. boom angle for indicated length 2 o 31 o o Max. boom length at boom angle 90 ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-101542 *This capacity based on maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension. 2. 26 ft. and ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only.
10 26 - ft. 8,4 lbs 100% 20' 0" 26 ft. LENGTH ft. LENGTH Over Rear o o * *5,2 *5,7 5,2 () 8,120 5,7 4,9 (68.5) (73) 7,3 (66) 5,3 4,5 6,3 (63.5) 4,7 (68) 4,1 (68.5) *2,7 5,6 (.5) 4,290 () 3,890 2,7 (74.5) 4,820 (57.5) 3,8 3,7 2,7 (72) 4,200 3,5 (59) 3,0 2,5 (69.5) 3,6 (51.5) 3,2 3,4 (59) 2,520 (67) 3,0 (48.5) 3,000 (52.5) 3,2 (56.5) 2,4 2,520 2,7 (49) 3,0 (54) 2,420 90 2,0 (41) 2,0 2,820 (51) 2,390 (58.5) 95 1,6 (37) 2,100 (.5) 2,520 2,3 (.5) 100 1,3 (32.5) 1,6 (.5) 2,1 2,310 (52) 105 1,020 (27) 1,8 (42) 2,000 (48.5) 110 1,5 (38.5) 1,5 115 1,2 1,2 (.5) 120 1,000 (.5) Min. boom angle for indicated length 2 o 31 o o Max. boom length at boom angle 90 ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-101564 *This capacity based on maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension. 2. 26 ft. and ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only.
2,0 lbs 100% 20' 0" 3º Main Boom Length in 29 90 95 9,000 (63) 10,8 (61),100 (69.5) 46,9 (74.5) 12 53,0,100 44,9 38,8 (72) (.5) 15,7 41,6 41,0 (68) 36,000 (72.5) 29,4 () *22,4 20 28,0 () 29,200 (52.5) 29,6 29,0 (67) 27,0 22,4 *18,5 *15,0 25 21,900 22,0 22,5 22,7 19,2 16,0 15,0 (42.5) () (72.5) (74) 17,000 (29) 17,1 (47) 17,3 17,0 16,8 (66) 14,0 (69) 13,200 (.5) 12,9 (38) 13,0 (49.5) 13,1 (57) 13,2 12,0 (.5) 11,0 (67.5) 10,1 10,200 10,0 10,3 10,0 10,000 (26) (42.5) (51.5) (57.5) 8,2 (46) 8,2 (53) 8,310 (58) 8,3 (.5) 6,6 (23.5) 6,690 (39.5) 6,710 6,7 6,7 (57) 5,490 5,490 5,5 5,5 (32) (43) () (53) 4,0 (22) 4,520 (37) 4,5 (.5) 4,5 (49) 3,720 () 3,7 (.5) 3,7 (44.5) 3,0 3,090 3,110 (20.5) () () 2,5 (28.5) 2,5 2,020 (19.5) 2,0 (28) 1,6 (19.5) Minimum boom angle ( o ) for indicated length 0 Maximum boom length (ft.) at boom angle 95 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 29 90 95 23,0 (22.8) 13,0 (33.8) 8,520 (43.8) 5,6 (53.8) 3,8 (63.8) 2,5 (73.8) 1,6 (83.8) 1,320 (89) NOTE: ( ) Reference radii in feet. A6-829-102812 11
12 2,0 lbs 100% 20' 0" Over Rear Main Boom Length in 29 90 95 9,000 (63) 10,8,100 46,9 (61) (69.5) (74.5) 12 53,0,100 44,9 38,8 (72) (.5) 15,7 41,6 41,0 36,000 29,4 *22,4 (68) (72.5) () 20 28,0 29,200 29,6 29,0 27,0 22,4 *18,5 *15,0 () (52.5) (67) 25 21,900 22,0 22,5 22,7 19,2 16,0 15,0 (42.5) () (72.5) (74) 17,0 (29) 17,4 (47) 17,0 17,900 16,8 (66) 14,0 (69) 13,200 (.5) 14,0 14,0 14,4 14,0 12,0 11,0 (38) (49.5) (57) (.5) (67.5) 11,0 (26) 11,5 (42.5) 11,0 (51.5) 11,0 (57.5) 11,000 10,000 9,3 9,4 9,5 9,6 9,0 (46) (53) (58) (.5) 7,690 (23.5) 7,8 (39.5) 7,890 8,0 7,990 (57) 6,490 6,5 6,690 6,7 (32) (43) () (53) 5,410 (22) 5,510 (37) 5,610 (.5) 5,6 (49) 4,610 4,710 4,7 () (.5) (44.5) 3,8 (20.5) 3,9 () 3,9 () 3,2 3,320 (28.5) 2,720 (19.5) 2,7 (28) 2,2 (19.5) Minimum boom angle ( o ) for indicated length 0 Maximum boom length (ft.) at boom angle 95 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 29 90 95 23,0 (22.8) 14,0 (33.8) 9,710 (43.8) 6,6 (53.8) 4,720 (63.8) 3,3 (73.8) 2,3 (83.8) 1,890 (89) NOTE: ( ) Reference radii in feet. A6-829-102813
26 - ft. 2,0 lbs 100% 20' - 0" 26 ft. LENGTH ft. LENGTH 3º 13 o o * *5,2 *5,7 5,2 () 8,120 (68.5) 5,7 4,9 (73) 6,9 5,3 4,5 (66) 5,6 (63.5) 4,7 (68) 4,1 (68.5) *2,7 4,6 (.5) 4,290 () 3,890 2,7 (74.5) 3,7 (57.5) 3,8 3,7 2,7 (72) 3,0 3,5 (59) 3,0 2,5 (69.5) 2,4 2,9 3,210 2,520 (51.5) (59) (67) 1,9 (48.5) 2,3 (52.5) 2,6 (56.5) 2,4 1,510 1,810 (49) 2,220 (54) 2,420 90 1,120 (41) 1,3 1,820 (51) 2,390 (58.5) 95 1,4 1,9 (.5) 100 1,1 1,5 (52) 105 1,210 (48.5) Min. boom angle for indicated length o 36 o o 42 o Max. boom length at boom angle ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-101543 *This capacity based on maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension. 2. 26 ft. and ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only.
14 29-95 ft. 2,0 lbs 100% 20' - 0" 26 ft. LENGTH ft. LENGTH Over Rear o o * *5,2 *5,7 5,2 () 8,120 5,7 4,9 (68.5) (73) 7,3 (66) 5,3 4,5 6,3 4,7 4,1 *2,7 (63.5) (68) (68.5) 5,6 4,290 3,890 2,7 (.5) () (74.5) 4,7 (57.5) 3,8 3,7 2,7 (72) 3,9 3,5 (59) 3,0 2,5 (69.5) 3,310 3,2 3,4 2,520 (51.5) (59) (67) 2,7 3,000 3,2 2,4 (48.5) (52.5) (56.5) 2,2 2,5 (49) 3,0 (54) 2,420 90 1,790 2,0 2,5 2,390 (41) (51) (58.5) 95 1,0 1,590 2,1 2,3 (37) (.5) (.5) 100 1,0 1,200 1,790 2,0 (32.5) (.5) (52) 105 1,4 (42) 1,8 (48.5) 110 1,1 1,0 (38.5) 115 1,1 (.5) Min. boom angle for indicated length 27 o o 34 o 34 o Max. boom length at boom angle ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-1015 *This capacity based on maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension. 2. 26 ft. and ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only.
1,2 lbs 100% 20' 0" 3 Main Boom Length in 29 90 95 9 72,4 (63) 10,8,100 46,9 (61) (69.5) (74.5) 12 51,2,100 44,9 (72) 38,8 (.5) 15 39,000,000,3 36,000 29,4 *22,4 (68) (72.5) () 20 27,000 27,900 28,0 28,0 27,0 22,4 *18,5 *15,0 () (52.5) (67) 25 20,900 (42.5) 21,0 21,5 22,0 19,2 () 16,0 (72.5) 15,0 (74) 15,1 15,200 15,2 15,5 15,8 14,0 13,200 (29) (47) (66) (69) (.5) 11,0 (38) 11,4 (49.5) 11,6 (57) 11,8 11,8 (.5) 11,0 (67.5) 9,010 8,9 9,0 9,190 9,210 9,220 (26) (42.5) (51.5) (57.5) 7,1 7,2 7,2 7,0 7,320 (46) (53) (58) (.5) 5,0 (23.5) 5,8 (39.5) 5,8 5,8 5,8 (57) 4,7 4,7 4,7 4,7 (32) (43) () (53) 3,8 (22) 3,8 (37) 3,8 (.5) 3,8 (49) 3,110 3,1 3,1 () (.5) (44.5) 2,4 2,5 2,5 (20.5) () () 2,010 (28.5) 2,0 1,5 1,590 (19.5) (28) 1,190 (19.5) Minimum boom angle ( o ) for indicated length 0 Maximum boom length (ft.) at boom angle 95 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 29 90 22,6 (22.8) 12,100 (33.8) 7,5 (43.8) 4,9 (53.8) 3,2 (63.8) 2,0 (73.8) 1,2 (83.8) NOTE: ( ) Reference radii in feet. A6-829-1015A 15
16 1,2 lbs 100% 20' 0" Over Rear Main Boom Length in 29 90 95 9 72,4 (63) 10,8,100 46,9 (61) (69.5) (74.5) 12 51,2,100 44,9 (72) 38,8 (.5) 15 39,000,000,3 36,000 29,4 *22,4 (68) (72.5) () 20 27,000 27,900 28,0 28,0 27,0 22,4 *18,5 *15,0 () (52.5) (67) 25 20,900 (42.5) 21,0 21,0 22,100 19,2 () 16,0 (72.5) 15,0 (74) 16,0 16,900 17,100 17,2 16,8 14,0 13,200 (29) (47) (66) (69) (.5) 13,100 (38) 13,1 (49.5) 13,2 (57) 13,3 12,0 (.5) 11,0 (67.5) 10,0 10,0 10,0 10,5 10,0 10,000 (26) (42.5) (51.5) (57.5) 8,390 8,0 8,5 8,7 8,8 (46) (53) (58) (.5) 6,8 (23.5) 6,9 (39.5) 7,020 7,1 7,2 (57) 5,720 5,810 5,910 5,9 (32) (43) () (53) 4,710 (22) 4,810 (37) 4,910 (.5) 4,9 (49) 3,9 4,0 4,110 () (.5) (44.5) 3,2 3,3 3,390 (20.5) () () 2,7 (28.5) 2,7 2,210 2,2 (19.5) (28) 1,7 (19.5) Minimum boom angle ( o ) for indicated length 0 Maximum boom length (ft.) at boom angle 95 NOTE: ( ) Boom angles are in degrees. *This capacity is based on maximum boom angle. Lifting Capacities at Zero Degree Boom Angle Boom Main Boom Length in Angle 29 90 95 22,6 (22.8) 13,5 (33.8) 8,690 (43.8) 5,8 (53.8) 4,0 (63.8) 2,0 (73.8) 1,8 (83.8) 1,4 (89) A6-829-101563A NOTE: ( ) Reference radii in feet.
26 - ft. 1,2 lbs 100% 20' 0" 26 ft. LENGTH ft. LENGTH 3 17 o o * *5,2 *5,7 5,2 () 7,6 (68.5) 5,7 4,9 (73) 6,110 (66) 5,3 4,5 4,910 (63.5) 4,7 (68) 4,1 (68.5) *2,7 3,9 (.5) 4,290 () 3,890 2,7 (74.5) 3,1 3,8 3,7 2,7 (57.5) (72) 2,0 3,0 (59) 3,2 2,5 (69.5) 1,9 (51.5) 2,0 2,6 (59) 2,520 (67) 1,4 (48.5) 1,8 (52.5) 2,190 (56.5) 2,4 1,0 1,3 (49) 1,7 (54) 2,420 90 1,0 (51) 2,000 (58.5) 95 1,0 1,5 (.5) 100 1,200 (52) Min. boom angle for indicated length 43 o o 46 o 49 o Max. boom length at boom angle ft. ft. NOTE: ( ) Boom angles are in degrees. A6-829-101544 *This capacity based on maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension. 2. 26 ft. and ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only.
18 26 - ft. 1,2 lbs 100% 20' 0" 26 ft. LENGTH ft. LENGTH Over Rear 90 95 100 105 110 Min. boom angle for indicated length Max. boom length at boom angle * 8,120 (68.5) 7,3 (66) 6,0 (63.5) 5,000 (.5) 4,120 (57.5) 3,390 2,7 (51.5) 2,2 (48.5) 1,7 1,3 (41) o *5,7 5,7 5,3 4,7 (68) 4,290 () 3,8 3,5 (59) 3,200 2,590 (52.5) 2,0 (49) 1,590 1,1 (.5) NOTE: ( ) Boom angles are in degrees. *This capacity based on maximum boom angle. *5,2 5,2 () 4,9 (73) 4,5 4,1 (68.5) 3,890 3,7 3,0 3,4 (59) 3,0 (56.5) 2,5 (54) 2,120 (51) 1,7 1,390 1,090 (42) o *2,7 2,7 (74.5) 2,7 (72) 2,5 (69.5) 2,520 (67) 2,4 2,420 2,390 (58.5) 2,3 (.5) 1,900 (52) 1,0 (48.5) 1,1 38 o 36 o o 43 o ft. ft. A6-829-101566 NOTES: 1. All capacities above the bold line are based on structural strength of boom extension. 2. 26 ft. and ft. boom extension lengths may be used for single line lifting service. 3. Radii listed are for a fully extended boom with the boom extension erected. For main boom lengths less than fully extended, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is configured. For boom angles not shown, use the rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only.
Weight Reductions for Load Handling Devices 26 ft. Offsettable Boom Extension *Erected 26 ft. - ft. Tele. Boom Extension 3,0 lb. *Erected (Retracted) 4,0 lb. *Erected (Extended) 6,0 lb. *Reduction of main boom capacities (no deduct required for stowed boom extension) When lifting over swingaway and/or jib combinations, deduct total weight of all load handling devices reeved over main boom nose directly from swingaway or jib capacity. load handling Line Pulls and Reeving Information Permissible Nominal Hoists Cable Specs. Line Pulls Cable Length 5/8" (16 mm) 6x37 Class, Main EIPS, IWRC Special Flexible 11,6 lb. 4 ft. Min. Breaking Strength 41,200 lb. 5/8" (16 mm) Flex-X Main & Aux. Rotation Resistant (Non-rotating) 11,6 lb. 4 ft. Min. Breaking Strength 61,200 lb. The approximate weight of 5/8" wire rope is 1.0 lb./ft. 19 Auxiliary Boom Nose Hookblocks and Headache Balls: 114 lb. Ton, 4 Sheave 7 lb. + 25 Ton, 3 Sheave 5 lb. + 15 Ton, 3 Sheave 0 lb. + 7.5 Ton Overhaul Ball 3 lb. + + Refer to rating plate for actual weight. NOTE: All load handling devices and boom attachments are considered part of the load and suitable allowances MUST BE MADE for their combined weights. Weights are for Grove furnished equipment. Hoist Performance Wire Rope Hoist Line Drum Rope Layer Pulls Capacity (ft.) Available lb.* Layer Total 1 11,6 77 77 2 10,4 162 3 9,5 94 256 4 8,7 102 8 5 8,0 111 469 6 7,490 119 588 *Max. lifting capacity: 6x37 or x7 class = 11,6 lb. Working Area Diagram CENTERLINE BOOM CENTER OF OUTRIGGER SUPPORT CG OF LOAD OVER SIDE LONGITUDINAL CENTERLINE OF CARRIER 3 OVER FRONT OVER REAR CENTER FRONT STABILIZER CYLINDER (IF EQUIPPED) OVER SIDE 6-829-005671 CENTER OF ROTATION Bold lines determine the limiting position of any load for operation within working areas indicated.
Manitowoc Crane Group - Americas Manitowoc, Wisconsin Facility Tel: [Int + 001] 920 684 6621 Fax: [Int + 001] 920 683 6277 Shady Grove, Pennsylvania Facility Tel: [Int + 001] 717 597 8121 Fax: [Int + 001] 717 597 62 Manitowoc Crane Group - EMEA Europe Middle East & Africa Tel: [Int + 33] (0) 191 5 6281 Fax: [Int + 33] (0) 4 72 18 20 20 Manitowoc Crane Group - UK Europe Middle East & Africa Tel: [Int + 44] (0) 191 5 6281 Fax: [Int + 44] (0) 191 564 0442 Manitowoc Crane Group - Germany (Sales, Parts & Service) Tel: [Int + 49](0) 2173 8909 0 Fax: [Int + 49] (0) 2173 8909- Manitowoc Crane Group - France France & Africa (Sales, Parts & Service) Tel: [Int + 33] (0) 1 3 131 Fax: [Int + 33] (0) 1 3 8 Manitowoc Crane Group - Netherlands (Sales, Parts & Service) Tel: [Int + 31] (0) 76 578 39 99 Fax: [Int + 31] (0) 76 578 39 78 Manitowoc Crane Group - Italy Italy & Southern Europe (Sales, Parts & Service) Tel: [Int + 39] (0) 331 49 33 11 Fax: [Int + 39] (0) 331 49 33 Manitowoc Crane Group - Portugal Portugal & Spain (Sales, Parts & Service) Tel: [Int + 1] (0) 22 968 08 89 Fax: [Int + 1] (0) 22 968 08 97 Manitowoc Crane Group - Singapore Asia/Pacific excl China (Sales, Parts & Service) Tel: [Int + ] 6861 1733 Fax: [Int + ] 6862 / 4142 Manitowoc Crane Group - Shanghai China (Sales, Parts & Service) Tel: [Int + 86] (0) 21 6495 Fax: [Int + 86] (0) 21642038 Manitowoc Crane Group - Beijing China (Sales, Parts & Service) Tel: [Int + 86] (0) 10 646 71690 Fax: [Int + 86] (0) 10 646 71691 Manitowoc Crane Group - Middle East (Sales) Tel: [Int + 971] (0) 4 348 4478 Fax: [Int + 971] (0) 4 348 4478 (Parts & Service) Tel: [Int + 973] (0) 9 6 899 Fax: [Int + 973] (0) 2 7 7 Distributed By: Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories, and may not include all standard equipment. www.manitowoccranegroup.com 06-2M Printed in USA Form No. PG Part No. 01-131 Manitowoc Crane Group 2006