Available 14 to 36 GALLONS PER MINUTE

Custom Fuel Injection Systems Custom Injection Spacers New Fuel Pumps "Gear Pumps" Blowers "New and Rebuilt" Blower Restraints Lower Engine Restraints Custom CNC Machining Computech Distributor NecksGen Distributor

Available 14 to 36 GALLONS PER MINUTE

WE OFFER A FULL SERVICE SHOP FROM SETUP TO WELD UP Fuel Injection Systems Flow test and service fuel pumps (clean up extra) $ 66.00 Flow test complete system (Parts extra) $ 461.50 Install square doors in Enderle injector $ 360.50 INJECTORS GERARDOT CASTINGS BIRDCATCHER STYLE 4.625 BORE Attention Nostalgia Racers. Only Mag Birdcatcher available on the market. Labor and material to make injector in to short opening $ 250.00 Mag. Std. length opening 13.250 bolt center Round Butterflies, throttle shaft, $ 1,319.00 levers, stops, black finish Mag. Std. length opening 13.250 bolt center Square Butterflies, throttle shaft, $ 1,646.35 levers, stops, black finish Mag. Std length opening 13.250 bolt center - Round Butterflies, Square Barrel $ 2,041.85 valve, all lines & nozzles black finish (Complete) Mag. Std length opening 13.250 bolt center - Round Butterflies, Nitro Barrel valve, $ 2,068.15 all lines & nozzles black finish (Complete) Mag. Std length opening 13.250 bolt center - Square Butterflies, Square Barrel $ 2,358.70 valve, all lines & nozzles black finish (Complete) Mag. Std. length opening 13.250 bolt center Square Butterflies, Nitro Barrel valve, $ 2,396.00 all lines & nozzles, black finish. (Complete) Mag. Long opening 15.312 bolt center Round Butterflies, throttle shaft, levers, $ 1,436.45 stops, black finish Mag. Long opening 15.312 bolt center Square Butterflies, throttle shaft, levers, $ 1,764.30 stops, black finish Mag. Long opening 15.312 bolt center Round Butterflies, Nitro Barrel valve, all $ 2,187.75 lines & nozzles, black finish. (Complete) Mag. Long opening 15.312 bolt center Square Butterflies, Nitro Barrel valve, all $ 2,516.20 lines & nozzles, black finish. (Complete) **Dow 7 Finish Add** $ 250.00

Upright Fuel Injector Upright Injector Standard length opening 13.250 bolt center - 5.250 Butterflies, $ 1,205.85 throttle shaft, levers, stops, black finish mag or polished aluminum. Upright Injector Standard length opening 13.250 bolt center - 5.250 Butterflies, $ 1,945.65 Square metering valve, all lines & nozzles, throttle shaft, levers, stops, black finish mag or polished aluminum. (Complete) Upright Injector Standard length opening 13.250 bolt center - 5.250 Butterflies, $ 2,017.75 Nitro Barrel valve, all lines & nozzles, throttle shaft, levers, stops, black finish mag or polished aluminum. (Complete) K&N Air Filter with purchase of injector / sold separately $ 257.00 / 324.50 Carbon Fiber Air Scoop for upright injector $ 746.75 Carbon Fiber Air Scoop for upright injector with tray $ 849.75 Fiberglass Air Scoop for upright injector $ 421.90 Fiberglass Air Scoop for upright injector with tray $ 524.90 **Dow 7 Finish add the following** $ 250.00 A-Fuel Injector Upright A-Fuel Injector Long opening 15.312 bolt center 4.375 Butterflies, throttle shaft, levers, stops, black finish mag. For injected fuel dragsters-barrel valve mounts available on request $ 1,333.85 10.5 Low Profile Injectors Low Profile Injector to fit 10.5 Opening Complete with nitro barrel valve (Magnesium) $ 2,232.50 Low Profile Injector to fit 10.50 Opening Throttle shaft-butterflies-stops-throttle levers - (Magnesium) $ 1,659.95 Center Divider for Low profile Injector $ 225.00 The Big "V" **Aluminum or Magnesium** Carbon Fiber Replacement with Center Divider 5.562 Diameter Butterfly Option Replacement for Carbon Fiber injector polished- throttle shaft-butterflies-center divider-aluminum $ 1,809.20 Replacement for Carbon Fiber injector polished- throttle shaft-butterflies-center divider-magnesium $ 2,074.40 Replacement for Carbon Fiber injector-no polish-empty housing-aluminum (ADD $17 180 $ 1,491.65 Replacement for Carbon Fiber injector-polished-empty housing-aluminum(add $175.00-for Mag) $ 1,646.50 Replacement for Carbon Fiber injector-polished-aluminum-complete (ADD $175.00-for-Mag) $ 2,539.40 ENDERLE FUEL INJECTORS Install square doors in Enderle injector $ 360.50 Alum. Gas Bugcatcher (Complete) (Square Barrel Valve) $ 1,467.25 Alum. Gas Bugcatcher w/ Fins (Complete) (Square Barrel Valve) $ 1,527.95 Alum. Methanol Bugcatcher (Complete) (Square Barrel Valve) $ 1,390.40 Alum. Methanol Bugcatcher w/fins (Complete) (Square Barrel Valve) $ 1,450.75 Alum. Nitro Barrel Valve Birdcatcher (Complete) $ 1,651.70 Alum. Methanol Buzzardcatcher (Complete) $ 1,829.00 Alum. Nitro Barrel Valve Buzzardcatcher (Complete) $ 1,829.00 Big and Ugly Tall Injector / Carbon Fiber Replacement Nitro Barrel Valve 5.62 bore (Complete) $ 2,502.00 Big and Ugly Tall Injector / Carbon Fiber Replacement Nitro Barrel Valve 5.00 bore (Complete) $ 2,520.90 Big and Ugly Tall Injector / Carbon Fiber Replacement Nitro Barrel Valve 4.37 bore (Complete) $ 2,520.90

TUNNEL RAM INJECTORS Tunnel ram injectors include the following parts; Injector hat, metering valve, idle & secondary check valves, bypass pills, distribution block, nozzles, and fuel lines for the intake manifold. The manifold, manifold top, fuel pump, fuel shut off, etc. must be ordered separately. Birdcatcher Tunnel Ram Injector $ 1,678.90 Buzzardcatcher Tunnel Ram Injector $ 1,789.00 Bugcatcher (aluminum) Tunnel Ram Injector $ 1,490.25 Big & Ugly Tall Tunnel Ram Injector 5.56 Butterflies $ 2,369.50 Big & Ugly Tall Tunnel Ram Injector 5.00 Butterflies $ 2,387.00 Big & Ugly Tall Tunnel Ram Injector 4.44 Butterflies $ 2,387.00 Big & Ugly Low Profile Tunnel Ram Injector 5.56 Butterflies $ 2,369.00 Upright Injector with Carbon Fiber scoop T Ram Injector $ 2,462.50 Upright Injector no scoop T Ram Injector $ 1,755.00 Top adapter for Edelbrock 7075 Big Block or 7070 small block manifold $ 179.40 Drill and tap manifold for distribution block and nozzles $ 160.00 FUEL PUMPS (All fuel pumps are coated) 80A Enderle (3002) $ 597.90 110 Enderle (3004) $ 667.15 600 Enderle (3004A) $ 667.15 760 Enderle (3004B) $ 667.15 990 Enderle (3005) $ 780.00 1100 Enderle (3006) $ 827.50 1200 Enderle (3007) $ 866.25 1270 Enderle (3008) $ 909.75 1380 Enderle (3009) 21 Gallon Nostalgia Pump $ 953.15 Hilborn 175-2 $ 829.40 Hilborn 175-4 $ 850.00 FUEL SHUT OFFS #6 2-way with fittings (85105) $ 91.40 #6 3-way with fittings (85110) $ 105.00 #6 4-way with fittings (85115) $ 118.50 #8 2-way with fittings (85205) $ 117.70 #8 3-way with fittings (85210) $ 138.15 #8 "Special Reverse" 3-way with fittings (85210B) $ 131.65 #8 4-way with fittings (85215) $ 157.75 #12 2-way with fittings (85305) $ 157.75 #12 3-way with fittings (85310) $ 181.55 #12 4-way with fittings (85315) $ 207.50 #16 2-way with fittings (85405) $ 173.15 #16 3-way with fittings (85410) $ 200.75 #16 4-way with fittings (85415) $ 228.30 Shut off Cable Bracket for 80A Pump (80ABR) $ 36.70 Shut off Cable Bracket for 110 Pump (110BR) $ 36.70 Morse Cable Bracket (36174) $ 20.10 Aluminum Bracket Only for 80A Pump (80ABRA) $ 20.60 Aluminum Bracket Only for 110 Pump (110BRA) $ 20.60 Covers and Drives Fuel Pump Extension under 4.5 inches long $ 149.15 Fuel Pump Extension over 4.5 inches long $ 154.70 Chevy Hex Drive (5005) $ 27.40 Chevy Hex Drive Jackson (5005J) $ 27.40 Chevy thrust bearings (5006) $ 18.45

Covers and Drives Chevy thrust spring (5007) $ 1.60 Chevy thrust shims (5007A) $ 0.78 Chevy Hex Drive Assy w/ bearings & shims (5008) $ 52.38 Chevy Hex Drive Assy - Jackson (5008J) $ 52.38 Chevy Hex Drive Assy w/ bearings & springs (5008A) $ 47.38 289 Ford Hex Drive (5009) $ 36.82 Chry Hex Drive (5005A) $ 27.40 Chevy Big Block front cover (5004) $ 122.57 Chevy Small Block front cover (5001) $ 122.57 Chevy Small Block front cover seal (5002) $ 16.63 289 Ford front cover (5003) $ 122.57 Chevy Big Block timing belt pump drive assy (5010) $ 294.74 Chevy Big Block mandrel style timing belt pump drive assy (5010A) $ 305.30 Chevy Small Block timing belt pump drive assy (5011) $ 315.90 Chevy Small Block mandrel style timing belt pump drive assy (5011A) $ 307.40 Ford Small Block timing belt pump drive assy (5012) $ 314.00 426-440 Chry timing belt pump drive assy (5014) $ 324.96 Timing belt pump drive for blown engine (5014A) $ 312.35 Ford Big Block timing pump drive assy (5015) $ 316.10 Belt drive pump bracket (5016) $ 96.40 Belt drive pump bracket casting (5016C) $ 46.10 28 Tooth large timing belt pulley (5017) $ 51.75 32 Tooth large timing belt pulley (5017A) $ 59.95 14 Tooth small timing belt pulley.625 Bore (5018) $ 43.78 16 Tooth small timing belt pulley.625 Bore (5018A) $ 46.15 14 Tooth small timing belt pulley 1.0 Bore (5018-1) $ 43.78 16 Tooth small timing belt pulley 1.0 Bore (5018A-1) $ 46.15 Belt drive crankshaft flange - Chevy (5019C) $ 46.15 Belt drive crankshaft flange - Chry (5019CHR) $ 46.15 Belt drive crankshaft flange - Ford (5019F) $ 46.15 Belt drive crankshaft mandrel - Small Block Chevy (5019AASB) $ 46.15 Belt drive crankshaft mandrel - Big Block Chevy (5019AABB) $ 46.15 Alum crank flange spacer - Small Block Chevy (5019BC) $ 19.26 Alum crank flange spacer - Chry (5019CHR) $ 19.26 Alum crank flange spacer - Ford (5019BF) $ 19.26 Belt drive blower crank drive assy (5019BL) $ 95.60 Chevy Small Block engine bracket (5020) $ 44.50 Chevy Big Block engine bracket (5021) $ 42.28 Timing belt (5022) $ 14.32 Pump bracket hex shaft (5023) $ 27.75 426-440 Chry engine bracket (5024) $ 53.40 Ford Small Block engine bracket (5025) $ 42.28 Ford Big Block engine bracket (5026) $ 44.55 Pump bracket bearing (5203ZZ) $ 22.56 Dual pump drive gearbox - alum (4116) $ 427.15 Magneto / pump dual drive gearbox (4116PM) $ 512.58 Gearbox mag drive assy (88-109) $ 120.76 Dual pump drive gear (4118) $ 29.56 Dual pump drive shaft - male (4119) $ 32.80 Dual pump drive shaft - female (4120) $ 32.80 Fuel Filter High Pressure $ 149.15 Fuel Filter for inlet line ( no fittings) $ 83.05

MISCELLANEOUS FUEL SYSTEM COMPONENTS Billet double end throttle levers $ 19.77 Billet single end throttle levers $ 19.15 Distribution block with (8) Nozzles $ 71.07 Distribution block with (12) Nozzles $ 81.98 Distribution block with (16) Nozzles $ 89.61 Nitro style barrel valve for methanol $ 321.36 Square style barrel valve for methanol $ 289.63 Nozzles $ 5.40 Nozzles Flowed $ 9.00 Jets $ 4.70 Jets Flowed $ 8.00 Small Jet Holders $ 24.92 Large Jet Holders $ 30.33 Nozzle Holders $ 29.61 All #6 Check Valves $ 43.72 All #8 Check Valves $ 62.36 Hat Line Sets $ 126.15 Individual Hat Lines $ 15.75 Port Line Sets $ 131.58 Individual Port Lines $ 16.43 Nozzle Bodies $ 10.90 Hose w/ (1) 90 deg. End $ 29.80 CUSTOM INJECTOR SPACERS From 2 4 inches high $ 478.69 From 4-7 inches high $ 535.45 BLOWER RESTRAINTS 14-1 Adjustable straps fits any blower 6-71 to 14-71 $ 355.19 Top Plate Only $ 107.12 Straps $ 107.12 Header Bracket & pin assembly Set $ 154.50 Header Brackets w/ pins each $ 41.20 Header Bracket Pins each $ 11.20 Heat Shield set $ 41.20 Recertification of 14.1 $ 107.12 14-2 Restraint (Complete) (includes header brackets) $ 882.00 Bag Only 14.2 $ 425.00 Plate & Straps $ 479.25 Header Bracket Set (5 piece set) $ 195.70 Rear Header Bracket Assembly $ 46.35 Recertification of 14.2,14.21, & 14.3 $ 200.00 PSI 14.21 Blower Restraint (Complete) (header brackets extra) $ 1,152.15 Bag Only 14.21 $ 625.00 Plate & Straps 14.21 $ 587.50 Nostalgia Restraint (Complete) (header brackets extra) 6-71 & 8-71 Blower $ 1,501.22 14-3 Restraint (Complete) (header brackets extra) 14-71 Blower $ 1,501.22 Top Plate only14.3 $ 650.00 Bag only 14.3 $ 650.00 Bottom Plate 14.3 $ 275.00 LOWER ENGINE RESTRAINT Flexible Bags (SFI Accepted) 7-1 spec. $ 926.75 NHRA & IHRA Accepted Flexible Bags (Step-pans add 100.00) $ 437.75

BLOWERS AND BLOWER REPAIRS We Stock All Standard Blower Belt Sizes We Also Stock All Types of Pulleys and Drives Restrip and service blower $ 312.00 Blower stripping "full round" by the foot $ 3.60 Blower stripping "half round" by the foot $ 2.90 Blower stripping "Nylatron" by the foot $ 2.00 Blower timing, cut for clearance, square top and bottom (each) $ 47.00 Weld rotors Time and Material 6061 T6 Blower Studs & Nuts (set) $ 50.35 7075 T6 Blower Studs & Nuts (set) $ 65.80 Blower Gel Lubricant Spray $ 18.50 Blower snout seal and bearing replacement (minimum cost + parts) $ 51.50 Screen Injector Gasket $ 34.50 "No Screen" Injector Gasket $ 12.85 Blower Base Gasket $ 20.35 Miscellaneous **Chrysler hemi rocker arm stands **Combination blower belt idler / MSD44 / mag support **Set back blower drives custom lengths **Set back blower drive supports integral to combination blower belt idler / mag support **Blower belt guards Computech Weather Stations RaceAir Pro Weather Station (#1000) $ 494.40 RaceAir Competition Weather Analyzer (#3000) $ 391.40 DataMaxx Data Logger Bracket Kit w/sensors (#8000) $ 1,028.00 NTPA Multi-Engine Custom Fit Gear Box Blankets Available in Ballistic Nylon or Kevlar

Custom Transmission Blankets in Kevlar LencoDrive $ 360.50 Lenco CS1 2-Speed w/ Reverser $ 257.50 Lenco CS1 3-Speed w/ Reverser $ 267.80 Lenco CS2 New Generation $ 267.80 Lenco Reverser $ 164.80 Rob Moore Reverser $ 123.60 B&J 2-Speed w/reverser 2-Piece $ 267.80 B&J 3-Speed w/reverser 2-Piece $ 308.00 Rob Moore Reverser $ 120.00