Original MW ccessories. Installation Instructions. Retrofit - splash guards MW 3-Series Saloon ( 90 LI) MW 3-Series Touring ( 91 LI) Retrofit kit No.: 82 16 0 444 080 Splash guard, front 90 LI/91 LI 82 16 0 444 083 Splash guard, rear 90 LI 82 16 0 444 086 Splash guard, rear 91 LI Installation time The installation time of approx. 0. hours may vary depending on the vehicle s condition and equipment. Important information These installation instructions are primarily designed for use within the MW dealership organisation and by authorised MW service companies. In any event, the target group for these installation instructions is specialist personnel trained on MW cars with the appropriate specialist knowledge. ll work must be completed using the latest MW repair manuals, circuit diagrams, servicing manuals and work instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety regulations. In the event of installation or functional problems, limit troubleshooting to 0. hours for mechanical jobs and 1.0 hours for electrical jobs. To avoid unnecessary work and costs, send a corresponding enquiry via the ftersales ssistance Portal (SP) using the technical parts support application. Please quote the following: - Vehicle identification number - Part number of retrofit kit - xact description of the problem - Work already carried out o not archive the hard copy of these installation instructions since daily updates are made by SP! ll illustrations show L vehicles; follow the same procedure on R vehicles. Installation information The installation instructions describe the procedure on the left-hand side of the vehicle only. The same procedure should be followed analogously on the right-hand side of the vehicle. lean adhesion surfaces with a suitable cleaning agent. They must be free of oil and grease. When adhering the components, the ambient temperature must be no lower than 1 and no higher than 3. The car can be driven after approx. 6 hours and driven through a carwash after 48 hours. Special tools required None MW G, Munich 01 29 2 11 302 0/2009 (V/S) 1
Pictograms enotes instructions that draw your attention to dangers. enotes instructions that draw your attention to special features. enotes the end of the instruction or other text. MW G, Munich 01 29 2 11 302 0/2009 (V/S) 2
ontents Section Page 1. Preparatory work..................................................................... 4 2. Installing front splash guards.......................................................... 3. Only for 90 LI / 91 LI without 33i / 33d - Installing rear left splash guard........... 7 4. Only for 90 LI / 91 LI without 33i / 33d - Installing rear right splash guard.......... 9. Only for 90 LI / 91 LI with 33i / 33d - Installing rear left splash guard.............. 11 6. Only for 90 LI / 91 LI with 33i / 33d - Installing rear right splash guard............ 13 7. Finishing off and coding............................................................. 1 MW G, Munich 01 29 2 11 302 0/2009 (V/S) 3
1. Preparatory work IST No. Perform quick test --- isconnect negative terminal of battery 12 00... Remove the following components Rear wheels 36 10 300 MW G, Munich 01 29 2 11 302 0/2009 (V/S) 4
2. Installing front splash guards 1 4x 12 mm 16 mm 2x 2x 2x 090 0781 V 090 0011 2 3 LNR 090 0012 090 0013 4 090 0014 090 001 6 7 Ø 4mm 090 0782 V 090 0017 MW G, Munich 01 29 2 11 302 0/2009 (V/S)
2. Installing front splash guards 8 9 kg 090 0018 090 0019 MW G, Munich 01 29 2 11 302 0/2009 (V/S) 6
3. Only for 90 LI / 91 LI without 33i / 33d - Installing rear left splash guard 1 2x F G 2x 090 076 V 090 047 V 2 3 LNR 090 0022 090 0023 4 090 048 V 090 0783 V 6 7 Ø mm 090 00 V 090 01 V MW G, Munich 01 29 2 11 302 0/2009 (V/S) 7
3. Only for 90 LI / 91 LI without 33i / 33d - Installing rear left splash guard 8 9 090 0028 090 02 V 10 11 090 087 V 090 03 V 12 kg 090 04 V MW G, Munich 01 29 2 11 302 0/2009 (V/S) 8
4. Only for 90 LI / 91 LI without 33i / 33d - Installing rear right splash guard 1 4x F G 2x 090 078 V 090 0 V 2 3 LNR 090 0034 090 061 V 4 090 078 V 090 079 V 6 7 090 080 V 090 090 V MW G, Munich 01 29 2 11 302 0/2009 (V/S) 9
4. Only for 90 LI / 91 LI without 33i / 33d - Installing rear right splash guard 8 9 2. 1. 090 07 V 090 08 V 10 11 090 088 V 090 09 V 12 kg 090 060 V MW G, Munich 01 29 2 11 302 0/2009 (V/S) 10
. Only for 90 LI / 91 LI with 33i / 33d - Installing rear left splash guard 1 4x F G 090 081 V 090 062 V 2 3 LNR 090 0022 090 082 V 4 090 063 V 090 0784 V 6 7 2. Ø mm 1. 090 06 V 090 066 V MW G, Munich 01 29 2 11 302 0/2009 (V/S) 11
. Only for 90 LI / 91 LI with 33i / 33d - Installing rear left splash guard 8 9 F G G 090 083 V 090 067 V 10 11 2. 1. 090 08 V 090 068 V 12 kg 090 069 V MW G, Munich 01 29 2 11 302 0/2009 (V/S) 12
6. Only for 90 LI / 91 LI with 33i / 33d - Installing rear right splash guard 1 4x F G 2x 090 086 V 090 0033 2 3 LNR 090 0034 090 070 V 4 090 0786 V 090 079 V 6 7 090 080 V 090 090 V MW G, Munich 01 29 2 11 302 0/2009 (V/S) 13
6. Only for 90 LI / 91 LI with 33i / 33d - Installing rear right splash guard 8 9 2. 1. 090 071 V 090 073 V 10 11 090 089 V 090 074 V 12 kg 090 07 V MW G, Munich 01 29 2 11 302 0/2009 (V/S) 14
7. Finishing off and coding The retrofit system does not require encoding. Install rear wheels in accordance with IST No. 36 10 300 Reconnect vehicle battery Perform quick test MW G, Munich 01 29 2 11 302 0/2009 (V/S) 1