ELECTROTECHNOLOGY - CERT III ELECTRICIAN Natinal cde: UEE30811 Training package: UEE11 TAFE Digital Applicatin Frm fr Certificate III UEE30811 Electrtechnlgy Electrician OFFICE USE ONLY Date received: Apprved: Assessed by: Rejected: Awaiting: Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 1 f 17
Instructins Yur respnsibility as an applicant is t prvide sufficient evidence t TAFE Digital Engineering Services that yu are currently engaged in sufficient and apprpriate full-time wrk in the Electrtechnlgy industry. Yu are required t prvide t TAFE Digital Engineering Services a statutry declaratin (included in this applicatin) cmpleted by yur current emplyer with details f the supervisr/s engaged in yur training alng with their cntact details and electrical license number/s. Yur emplyer is respnsible fr prviding yu with what is knwn as n the jb training in every unit f cmpetency. If nt, they will need t be able t prvide an alternative and explain t TAFE Digital Engineering Services hw this will ccur. This training shuld prvide yu will ALL f the wrkplace evidence that yu will need t recrd and cllect thrughut the duratin f yur curse. If a secndary emplyer is needed t get all the training their details will need t be added in the areas prvided. T btain yur Certificate f Prficiency, the ttal f all wrk experience must nt be less than the apprenticeship cntract time. Fr nn-apprentices, the wrk experience time is t be nt less than 4 years. Within this perid f time, yu will be expected t cmplete yur TAFE studies (nrmally this is cmpleted in 3 years). Enclsed in this applicatin are details f the wrkplace evidence required and specific tasks that will be required fr yur emplyer t sign ff n. All applicatins are assessed n merit. Please cmplete: 1. Applicant Details sectin 2. Emplyer Details sectin 3. Supervisr Details sectin 4. Table f wrkplace training 5. Statement f Training Declaratins Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 2 f 17
All parties shuld cmplete their details clearly and sign in the apprpriate places. This applicatin frm shuld be returned in ONE dcument plus scanned signatures by email t: ten.engineering@tafensw.edu.au Evidence f cmpetency as required in units (f cmpetency) that has been achieved thrugh n-the-jb training must be cllected and recrded. COLLECTED: hard r sft cpy evidence must include a variety f different types and may include but nt be limited t phts, third-party reprts, supervisr reprts, wrk recrds, etc. Cmpetency must be clearly demnstrable. The ability t judge the accuracy and hnesty f evidence relies n a well-rganised variety f evidence. RECORDED: yu must use an electrnic system such as SkillsTracker r eprfiling t recrd and track wrkplace evidence. A student submits a wrk recrd and their supervisr cnfirms the legitimacy f the recrd and cmpetency achieved pertaining t the task. Any csts are brne by the student r their emplyer. The nus is n the emplyer representative t arrange and prvide all necessary wrkplace training. The nus is n each electrical supervisr t train t a cmpetent level, supervise the student in all necessary tasks, and reprt and apprve training recrds. The nus is n the student t cllect and recrd evidence f their cmpetency achieved thrugh wrkplace training. If yu have any questins, please direct them t TAFE Digital engineering ten.engineering@tafensw.edu.au r 02 9715 8469. Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 3 f 17
Hw t cmplete this applicatin Read the instructins and general infrmatin carefully. Cnsider the requirements t d this curse: full-time paid emplyment in an electrical trade; and able t gain all the necessary n-thejb training. Cmplete this frm electrnically using Adbe Reader. The applicant cmpletes sectin 1 The emplyer representative cmpletes sectin 2 Each electrical supervisr cmpletes sectin 3. The emplyer representative and each electrical supervisr cmpletes sectin 4 All parties cmplete sectin 5 Print sectin 5. Statement f Training Declaratins, sign, and scan. Email the cmpleted frm, the scanned sectin declaratins, and any ther relevant dcuments t: ten.engineering@tafensw.edu.au. Each dcument must be in MS Wrd r pdf frmat, nt zipped, and f high quality. D nt send multiple image files. Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 4 f 17
General Infrmatin The skills and knwledge required by a cmpetent wrker are described in terms f Cmpetency Standard Units. Fr the electrical industry, these units are laid dwn in the Natinal Electrtechnlgy Cmpetency Standards. T be assessed as cmpetent against Natinal Electrtechnlgy Cmpetency Standards, individuals need t demnstrate they have acquired specified essential knwledge and assciated skills (EKAS) and undertaken related wrkplace functins The assessment f specified essential knwledge and assciated skills is carried ut during the ff-the-jb cmpnent f an individuals training, nrmally thrugh the assessment f Essential Knwledge and Assciated Skills Learning Specificatins whilst undertaking the qualificatin at a Cllege/Skill Centre. Wrk experience recrds prvide evidence that the applicant has, ver a perid f time, carried ut relevant wrkplace activities (e.g. install ) including each element (plan, carry ut, cmplete) acrss the range f equipment r prcedures autnmusly and t specified requirements, and n multiple ccasins. That is, these recrds can be used t make judgments abut the applicant s n-the-jb perfrmance. The purpse f this dcument is t prvide a mechanism the emplyer can use t ensure that the apprentice/applicant has expsure t all f the experience required by the training package t be deemed cmpetent. This dcument will be attached t the apprentice/applicants training cntract and the students prgress will be mnitred by the RTO n a six mnthly basis. The emplyer shuld arrange fr the student t have adequate study time t enable them t cmplete their studies. The student must attend all skills assessment sessins required. These are currently held quarterly at Mt Druitt Cllege, Sydney. Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 5 f 17
1. Applicant Details Please cmplete the details belw. Applicant Name: Address: Mbile: Other Phne: Apprenticeship I am an apprentice (Y / N): Number: Start Date: End Date: Previus Study Have yu started this curse already? (Y, give details / N): Applying fr Recgnitin f Prir Learning (Y / N): Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 6 f 17
Previus Study (cntinued) Please prvide a brief utline f yur prir learning, where this was btained, and the evidence yu have t supprt yur claim. Supprting evidence such as transcripts must be certified by a Justice f the Peace as true cpies and attached as separate dcuments.: Details f wrkplace evidence cllected (ie methds, units) and recrded (ie SkillsTracker, eprfiling): Ntes anything else we shuld knw?: Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 7 f 17
2. Emplyer Details sectin A. Primary Emplyer Please cmplete the details belw. Cmpany Name: ABN: Address: Mailing Address: Phne: Other Phne: Emplyer Representative Name: Rle in Cmpany: Mbile: Other Phne: Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 8 f 17
B. Secndary Emplyer Please cmplete the details belw. Cmpany Name: ABN: Address: Mailing Address: Phne: Other Phne: Emplyer Representative Name: Rle in Cmpany: Mbile: Other Phne: Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 9 f 17
3. Supervisr Details Please list details f ne r mre electrical supervisrs. Primary Emplyer Electrical Supervisr 1 Name: Electrical License Number & Issuing State: Mbile: Cmpany Name: Address: Phne: Primary Emplyer Electrical Supervisr 2 Name: Electrical License Number & Issuing State: Mbile: Cmpany Name: Address: Phne: Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 10 f 17
Secndary Emplyer Electrical Supervisr 3 Name: Electrical License Number & Issuing State: Mbile: Cmpany Name: Address: Phne: Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 11 f 17
4. Table f Wrkplace Training 4.1. Primary Emplyer Tables A, B, C, D Must be cmpleted T be cmpleted by the Primary emplyer representative and Electrical Supervisr 1. Please cmplete the table. Yu are stating that yu as emplyer / electrical supervisr can prvide the necessary training fr each f the required units in the curse. On-the-jb experience t be prvided t the learner [Training Plan Wrkplace Evaluatin - UEE30811] Please tick the bxes belw t indicate the range f wrk yu will prvide fr the learner. A. Installatin f lw vltage wiring and accessries Wiring Systems Cable Types Circuit Purpse All f these Minimum f fur (4) required All f these Metallic cnduit Nn-metallic cnduit Trunking Cable tray/ladder Undergrund Plus ne f belw Duct Catenary Psts/ples/struts Thermplastic insulated cable (TPI) Flat thermplastic sheathed (TPS) Circular thermplastic sheathed (TPS) Steel wire armured (SWA) Fire rated cable ( HT r HF r MIMS) Flexible cables Aerial cable Cnsumers mains (incl. 3 phase) Submains Lighting Scket utlets (1 and 3 phase) Single phase fixed appliance Plus ne f belw Single phase mtr Three phase mtr Cntrl Alternative supply B. Installatin f appliances, switchgear and assciated accessries fr lw vltage electrical installatins Cmpulsry Items ALL f fllwing are required. If yu can t prvide the experience thrugh yur cmpany, please leave the bx blank. Installing main switchbards (and custm switchbards), cnnecting main switches, prtective devices and links n a main switchbard and preparing the switchbard fr the installatin f metering (must include bth single and three phase switchbards). This must include all earthing and MEN system cnnectins Scket-utlets (1 and 3 phase) Lighting equipment and accessries Smke and fire detectrs Additinal Items All f these plus any 2 f these Cking appliances Water heaters and cntrls Transfrmers Three phase mtr starter and cntrl switches Fixed electric heating system (rm heaters) Fixed electric cling systems (fans r A/C) Appliances prducing ht water r steam Electric heating cables fr flrs and ceilings Trace heating Duct heaters Batteries Capacitrs Electricity cnverters Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 12 f 17
C. Trublesht and repair faults in lw vltage electrical apparatus and circuits Equipment and assciated circuits Machines and assciated cntrl circuits All f these required All f these required Switchbards Single phase mtrs and cntrls Prtective devices Three phase mtrs and cntrls Lighting Transfrmers and auxiliary cmpnents Heating Plus (desirable but nt essential) Scket-utlets Synchrnus machines Cntrl devices DC machines and cntrls D. Verify cmpliance and functinality f lw vltage general electrical installatins ALL f the fllwing are required Minimum f tw (2) required Visual inspectin Lad current f appliance/apparatus Earth cntinuity Leakage current Insulatin resistance Appliance/apparatus calibratin Shrt circuit Appliance/apparatus perfrmance Plarity characteristics Circuit cnnectins Fault lp impedance Nte: If yu as the primary emplyer cannt supply all the experience required, yu will need t arrange fr secndment f yur apprentice/trainee t anther emplyer fr the remaining elements. The secndary emplyer will need t cmplete Sectin 4.2 Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 13 f 17
4.2 Secndary Emplyer Tables A2, B2, C2, D2- t be cmpleted if there are any requirements nt met in tables A, B, C r D T be cmpleted by Secndary Emplyer and Electrical Supervisr 3. Please cmplete the table. Yu are stating that yu as electrical supervisr can prvide the necessary additinal training fr each f the required units in the curse nt available at the primary emplyer. On-the-jb experience t be prvided t the learner [Training Plan Wrkplace Evaluatin - UEE30811] Please tick the bxes belw t indicate the range f wrk yu will prvide fr the learner. A2. Installatin f lw vltage wiring and accessries Wiring Systems Cable Types Nt cvered in Sectin 4.1 Nt cvered in Sectin 4.1 Metallic cnduit Nn-metallic cnduit Trunking Cable tray/ladder Undergrund Plus ne f belw Duct Catenary Psts/ples/struts Thermplastic insulated cable (TPI) Flat thermplastic sheathed (TPS) Circular thermplastic sheathed (TPS) Steel wire armured (SWA) Fire rated cable ( HT r HF r MIMS) Flexible cables Aerial cable Circuit Purpse Nt cvered in Sectin 4.1 Cnsumers mains (incl. 3 phase) Submains Lighting Scket utlets (1 and 3 phase) Single phase fixed appliance Plus ne f belw Single phase mtr Three phase mtr Cntrl Alternative supply B2. Installatin f appliances, switchgear and assciated accessries fr lw vltage electrical installatins Cmpulsry Items Nt cvered in Sectin 4.1 Installing main switchbards (and custm switchbards), cnnecting main switches, prtective devices and links n a main switchbard and preparing the switchbard fr the installatin f metering (must include bth single and three phase switchbards). This must include all earthing and MEN system cnnectins Scket-utlets (1 and 3 phase) Lighting equipment and accessries Smke and fire detectrs Additinal Items Nt cvered in Sectin 4.1 Cking appliances Water heaters and cntrls Transfrmers Three phase mtr starter and cntrl switches Fixed electric heating system (rm heaters) Fixed electric cling systems (fans r A/C) Appliances prducing ht water r steam Electric heating cables fr flrs and ceilings Trace heating Duct heaters Batteries Capacitrs Electricity cnverters Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 14 f 17
C2. Trublesht and repair faults in lw vltage electrical apparatus and circuits Equipment and assciated circuits Machines and assciated cntrl circuits Nt cvered in Sectin 4.1 Nt cvered in Sectin 4.1 Switchbards Prtective devices Lighting Heating Scket-utlets Cntrl devices Single phase mtrs and cntrls Three phase mtrs and cntrls Transfrmers and auxiliary cmpnents Plus (desirable but nt essential) Synchrnus machines DC machines and cntrls D2. Verify cmpliance and functinality f lw vltage general electrical installatins ALL f the fllwing are required Minimum f tw (2) required Visual inspectin Lad current f appliance/apparatus Earth cntinuity Leakage current Insulatin resistance Appliance/apparatus calibratin Shrt circuit Appliance/apparatus perfrmance Plarity characteristics Circuit cnnectins Fault lp impedance Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 15 f 17
CORE Unit ID Cde UEENEEC020B UEENEEE101A UEENEEE102A UEENEEE104A UEENEEE105A UEENEEE107A UEENEEE137A UEENEEG006A UEENEEG033A UEENEEG063A UEENEEG101A UEENEEG102A UEENEEG103A UEENEEG104A UEENEEG105A UEENEEG106A UEENEEG107A UEENEEG108A UEENEEG109A UEENEEK142A List f Units f Cmpetency Unit Wrk Descriptin (nt unit title) Gather, recrd and mnitr wrk place evidence Apply safe wrk practices and participate in risk cntrl measures Safe use f hand & pwer tls. Basic fabricatin using metals and plastics. Design, install and fault find basic circuits. Selectin & use f basic meters. Wrk at heights. Drill & fix int timber, steel and cncrete Interpret industry related drawings and specificatins Identify, assess, dcument, cntrl and review WHS hazards in the wrkplace Design parameters cnnectin and fault determinatin f single and three phase machines. Installatin f cable supprt systems. Installatin, preparatin, terminatin, husing & testing f special use cables. (eg MIMS, SWA etc) Crrect arrangement f electrical installatins and prtective devices Design, cnnect and cntrl magnetic devices and machines. Design, install and fault find single and three phase a.c circuits. Selectin & use f test devices. Crrect arrangement f electrical wiring and accessries Design, install and fault find heating, lighting and accessries. Switchbard installatin, wiring and earthing Test and verificatin f cabling systems and appliances Crrect installatin and terminatin practices f crds & cables perating at vltages between 50V and 1000Va.c Crrect selectin f electrical installatins and prtective devices Trublesht and fault determinatin f single and three phase circuits and apparatus. Cnnect, test and cntrl single and three phase appliances and machines. Identify, assess, dcument, cntrl and review envirnmental & sustainable hazards in the wrkplace ELECTIVE UEENEEC001B UEENEED101A UEENEEH102A UEENEEI150A Recrd keeping Using a cmputer effectively Repairing and replacing cmpnents using sldering Develp, enter and verify prgrams fr Prgrammable Lgic Cntrllers Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 16 f 17
5. Statement f Training Declaratins This is t state that the infrmatin recrded here is a true and accurate recrd f the training that will be available t the applicant. I will advise TAFE Digital engineering services in writing within ne mnth f emplyment r supervisin changes that affect the applicants training. Primary Emplyer................ (Emplyer representative Please PRINT NAME) (Signature) (Date)................ (Electrical Supervisr 1 Please PRINT NAME) (Signature) (Date)................ (Electrical Supervisr 2 Please PRINT NAME) (Signature) (Date) Secndary Emplyer................ (Emplyer representative Please PRINT NAME) (Signature) (Date)................ (Electrical Supervisr 3) Please PRINT NAME) (Signature) (Date) Applicant................ (Applicant Please PRINT NAME) (Signature) (Date) Created: 16/02/2018, Mdified: 16/02/2018 Versin: 3.0 Page 17 f 17