High Equipment General Information High Equipment Company has developed an extensive line of components and systems designed to satisfy the unique requirements of elevated pressure applications. Since our founding in 54, we have been singularly focused upon this market segment and have consistently committed the resources necessary to be the industry s most reliable and economical source for quality high pressure products. This dedication to excellence within our core business has earned HiP preferred supplier status within diverse markets such as waterjet cutting and cleaning, oil and gas, chemical and petrochemical, research and development, universities, government, and general industry. Our product line includes a complete offering of valves, fittings, tubing, gauges, safety devices, pressure vessels, reactors, pumping systems, intensifiers, gas boosters and pressure generators for use at pressures through 50,000 psi. Stainless steel is the material most commonly used for our standard products, although we offer a variety of other materials to address alternative operating conditions. We maintain a significant inventory of many standard components, allowing us to provide fast response and delivery to our customers. For special requirements, our flexible structure and skilled machinists will produce a component or system designed to your individual specifications, in a timely manner. Index Page Valve Design...................2 Valve Selector Guide............. Catalog Numbering System........4 Warranty & Terms...............5 R 6/.
High Equipment Valve Design General Valve bodies through 00,000 psi are high tensile Type 6 stainless steel, 50,000 psi valve bodies are 7-4 PH stainless steel. Stem assemblies have non-rotating tips to prevent galling with valve seats. Packing is located below the stem threads to prevent contact with media (liquid or gas). Packing glands are equipped with locking devices or lock nuts. Six valve patterns (see chart on page.). Tubing connections are: /6",,,, /6",, and ". Pipe connections include:,,, /2",, and " NPT. Remote control air operators are available for most valves. Positive Guide Stem: High Equipment Company's patented Positive Guide stem assembly virtually eliminates lower stem rotation one of the most common causes of premature stem failure. The lower section stem is manufactured from hardened 7-4 PH stainless steel for exceptional wear and corrosion resistance and can be easily serviced with no special tooling required. The one-piece upper section stem eliminates the need for continual adjustment and minimizes loose handle backlash. The Positive Guide Stem is standard for all AF4, AF6, HF4, HF6, and HF valves, and 60,000 psi HF2 valves. Positive Guide Stem Rolled Style Stem: This simple two-piece design is also nonrotating and is ideal for smaller valves and for valves made from exotic materials. The standard lower section stem is manufactured from hardened 7-4 PH stainless steel. It is affixed to a one-piece upper stem requiring no periodic adjustment. The two stem components are free to rotate independently of each other, thereby minimizing rotation of the lower stem against the valve seat. The Rolled Style Stem is standard for all AF, AF2, NFA, NFB, LF4, LF6 valves, 0,000 psi HF2, XF4, and XF6 valves, as well as most valves requiring stems made from exotic materials. It is optional for any valve normally supplied with a Positive Guide Stem. Pinned Stem Design: This variation on the Rolled Style Stem is a three-piece design in which the lower stem is pinned into a freely-rotating stem guide. It has all of the advantages of the rolled style stem, with the additional benefit of a replaceable lower section stem. The Pinned Stem Design is standard for all NFC, NFD, NFF, NFH, LF, LF2, LF6, and HF6 valves. Pinned Stem Rolled Style Stem.2
Quick Selector Guide to Standard Taper Seal 0,000 psi Tubing Size O.D. I.D. Two Way Straight 0-AF4 0-AF6 Two Way Angle 0-2AF4 0-2AF6 Two Press 0-AF4 0-AF6 One Press 0-4AF4 0-4AF6 Two Stem 0-5AF4 0-5AF6 Replaceable Seat Medium 5,000 psi /6".00" /6" 7 5-AF 5-AF2 20-LF4 20-LF6 5-2AF 5-2AF2 20-2LF4 20-2LF6 5-AF 5-AF2 20-LF4 20-LF6 5-4AF 5-4AF2 20-4LF4 20-4LF6 5-5AF 5-5AF2 20-5LF4 20-5LF6 20-2LF4R 20-2LF6R 20,000 psi /6" 5 /6" 20-LF 20-2LF 20-LF 20-4LF 20-5LF 20-2LFR 20-LF2 20-2LF2 20-LF2 20-4LF2 20-5LF2 20-2LF2R High " /6".040".08" 20-LF6 0-HF2 0-HF4 20-2LF6 0-2HF2 0-2HF4 20-LF6 0-HF2 0-HF4 20-4LF6 0-4HF2 0-4HF4 20-5LF6 0-5HF2 0-5HF4 20-2LF6R 0-2HF2R 0-2HF4R 0,000 psi 0-HF6 0-2HF6 0-HF6 0-4HF6 0-5HF6 0-2HF6R /6" /6" 0-HF 0-2HF 0-HF 0-4HF 0-5HF 0-2HFR ".47" 0-HF6 0-2HF6 0-HF6 0-4HF6 0-5HF6 0-2HF6R.020" 60-HF2 60-2HF2 60-HF2 60-4HF2 60-5HF2 60-2HF2R 60,000 psi /6" 60-HF4 60-HF6 60-2HF4 60-2HF6 60-HF4 60-HF6 60-4HF4 60-4HF6 60-5HF4 60-5HF6 60-2HF4R 60-2HF6R Ultra High 00,000 psi 50,000 psi /6" /6" /6" /6" 60-HF 00-XF4 50-XF6 60-2HF 00-2XF4 50-2XF6 60-HF 00-XF4 50-XF6 60-4HF 00-4XF4 50-4XF6 60-5HF 60-2HFR 00-2XF4R 50-2XF6R High Equipment Company 255 W. 7th Street Erie, PA 6505 U.S.A. Phone: (84) 88-2028 -800-28-7447 Fax: (84) 88-6075 Website: www.high.com.
High Equipment Catalog Numbering System PRESSURE TYPE CONNECTION CONNECTION OPTIONS / ACCESSORIES (IF DIFFERENT FROM FIRST 0 - HF CONNECTION) Type of Connection(s) Options Series Components Size and Type 0 =0,000 psi 5 = 5,000 psi 20 = 20,000 psi 0 = 0,000 psi 40 = 40,000 psi 60 = 60,000 psi 00 = 00,000 psi 50 = 50,000 psi Catalog part numbers for some components (NPT fittings, special alloy parts) have been maintained for historical consideration. The referred pressure series may not reflect the actual pressure rating. Please refer to applicable catalog page for pressure rating, or consult the factory. 2 = Gland, Collar or Sleeve = Anti-Vibration Assembly 7 = Plug = 2-Way Straight Valve 2 = 2-Way Angle Valve = -Way Valve with Two Connections 4 = -Way Valve with One Connections 5 = -Way, 2-Stem Valve 6 = Ball Valve (Floating) 2 = Coupling or Adapter 22 = Elbow 2 = Tee 24 = Cross 4 = Check Valve 5 = Line Filter 6 = Safety Head (Straight) 6 = Safety Head (Tee Type) 7 = 2-Way Ball Valve * 72 = -Way Ball Valve 80 * 7 = -Way Ball Valve Diverter * 74 = 2-Way Ball Valve * 75 = -Way Ball Valve 80 * 76 = -Way Ball Valve Diverter * 77 = -Way Mini Ball Valve /4 NPT 80 = 2-Way Ball Valve * 8 = -Way Ball Valve 80 * 82 = -Way Ball Valve Diverter * * (Trunion) How to Order and Fittings Female Simply indicate catalog number and specify option or special requirement. Examples: 0-HF4 = 0,000 psi Straight Valve for / 4 " O.D. tubing 60-2HF4 = 60,000 psi Tee for / 4 " O.D. tubing 5-2AF2 = 5,000 psi Straight Coupling for / 8 " O.D. tubing, Taper Seal connections 5-2AF2NMB = 5,000 psi Adapter with one end / 8 " O.D. Female Taper Seal and opposite end Male / 4 " NPT Pipe 0-HF6-HT = 0,000 psi Straight Valve for / 8 " O.D. tubing with High Temperature Extension HIPCO 0-2NFB (N/C) = 0,000 psi Angle Valve for / 4 " NPT Pipe with Hipco Air Operator, Normally Closed HIPPO 5-A4F (N/C) = 0,000 psi Angle Valve for / 4 " Taper Seal with Hippo Piston Operator, Normally Closed 60-2HF4 (Hastelloy C-276) = 60,000 psi Straight Coupling for / 4 " O.D. tubing, made from Hastelloy C-276 material Male AF AM /6" Taper Seal AF2 AM2 Taper Seal AF4 AM4 Taper Seal AF6 AM6 Taper Seal LF4 LM4 Medium LF6 LM6 Medium LF LM /6" Medium LF2 LM2 Medium LF6 LM6 " Medium HF2 HM2 High HF4 HM4 High HF6 HM6 High HF HM /6" High HF6 HM6 " High XF4 XM4 Ultra High XF6 XM6 Ultra High NFA NMA NPT Pipe NFB NMB NPT Pipe NFC NMC NPT Pipe NFD NMD /2" NPT Pipe NFF NMF NPT Pipe NFH NMH " NPT Pipe HA /6" Hose HA2 Hose HA6 " Hose HA2 5 /6" Hose -V = Micro Control Metering Assembly (See page 6.5) -HT = High Temperature Stem Extension (Up to,000 F) (See page 6.4) -SGS = Sour Gas (H 2 S) Service -N/O = Normally Open -N/C = Normally Closed -K = With Antivibration Collars and Glands -REG = Regulating Tip -TSR8 = Ball Valve Actuator -TDA8 = Ball Valve Actuator Double Acting -W/O = Without Collars and Glands -LT = Low Temperature Stem Extension (to -20 F) -MPO-NO = Medium Duty Piston -MPO-NC = Medium Duty Piston -HPO-NO = Heavy Duty Piston -HPO-NC = Heavy Duty Piston -EHPO-NO = Extra Heavy Piston -EHPO-NC = Extra Heavy Piston.4 R5 8/04
Warranty High Equipment Company warrants the products which it manufactures to be free from defects in material and workmanship which would impair their intended usefulness. This warranty is for a period of one year after the date of shipment. Warranty is limited to the repair or replacement of any item manufactured by High Equipment Company. High Equipment Company shall not be liable for any direct or indirect consequential damage arising from a failure or malfunction of the equipment. This warranty further excludes damage, failure or malfunction which is caused by corrosion or erosion common to the material supplied. Terms: Net 0 for qualified accounts FOB: Erie, PA - USA High Equipment Company 255 W. 7th Street Erie, PA 6505 U.S.A. Phone: (84) 88-2028 -800-28-7447 Fax: (84) 88-6075 Website: www.high.com.5