Bay Senir High Schl Gym Derby Car Specificatins Cub Scuts and Siblings under 11 years ld AND the Cubmaster Challenge Length, Width and Clearance: Width Maximum verall width, including wheels and axels, shall nt exceed 2-3/4 inches. Minimum width between the wheels shall be 1-3/4 inches s the car will clear the center guide strip. Maximum length shall nt exceed 7.0 inches (be advised that sme kits cntain blcks f pine which are lnger and must be cut in advance t meet this standard). Minimum clearance between the bttm f the car and the racing surface shall be 3/8 inch t allw clearance fr the center guide strip. Maximum height shall nt exceed 2-3/4 inches. This specificatin will allw the car t pass under a timing device in an unrestricted fashin. Wheelbase (distance between the frnt and rear axels) may nt be changed frm the kit bdy distance f 4-3/8 inches. Wheels and Axles: Only wheels and axles frm the fficial Pinewd Derby kit may be used. Beveling, ruting, tapering, perfrating r any ther significant altering f the shape and perfrmance f the wheels is prhibited. The tread may nt be mdified t enhance its perfrmance and must be a cmpletely flat surface. The tread width must nt be narrwed beynd its riginal width. Axles and wheels may nly be lightly sanded and plished and still cnfrm t race specificatins. Wheel bearings, washers r bushings are prhibited. This includes wheel cvers r hubcaps which serve t keep the wheel hubs frm cntacting the car bdy and serve as a lubricatin well r tap. The car must be free-wheeling with n starting device r ther prpulsin such as adhesives, magnets, rubber bands, mtrs, jets, etc. Metal frame(s) and axle supprt(s) are prhibited. Axles must be munted directly int the wd slts prvided in the car bdy. Axles may nt be jined tgether with any device and the fur independent axels must be clearly visible in the slts prvided in the bttm f the car. *NOTE* The Grand Prix Pinewd Derby Axle Guard can be used since it is an fficially licensed prduct f the BSA. Weight and Appearance: Weight may nt exceed 5.0 unces. The readings f the fficial race scale will be cnsidered final. Five (5.0) unces will be determined by the fficial race scales n the day f the race. Every effrt will be made t assure that the digital scales are reliable and accurate. The imprtant pint is that all will race accrding t the same standard. Please keep this in mind while weighing yur vehicle n ther scales. Rev. 2-16-2009 Page 1 f 6
Bay Senir High Schl Gym The car may be carved, sculpted r sanded in rder t enhance its perfrmance and/r appearance as lng as the car cntinues t meet the size restrictins fr the race. N lse materials f any kind are permitted n r inside the car. The car bdy may have n mving parts. Additinal materials may be added t the car fr the fllwing purpse(s) nly: Weights may be added t increase the weight and/r alter the weight distributin f the car. All weight must be securely fastened t the car. Weights shall be passive, i.e. nn-mveable. Paints/decals/decratins may be added t alter the appearance and/r aerdynamics f the car. Glue may be used t adhere the axels t the car bdy. Axels cannt be active, meaning they cannt be part f any suspensin system. Wd putty, r a similar substance, may be used t repair minr damage t the car. Indented nses are prhibited. Cars shaped like the ne pictured will stage further dwn the track and thus are nt traversing the same distance as the ther cars. A mdificatin t the car will be requested during inspectin t ensure it will start the race with the nse n the starting gate. Wheels must nt extend beynd the frnt f the car bdy. Detailing must nt include any reference t alchl, smking r drugs. Lubricatin: Only dry pwdered lubricants, such as graphite r white pwder Pinewd Derby Car lubricant, may be used. Oils and silicne sprays can ful the track and are prhibited. A car may be lubricated just prir t inspectin. This is the nly time n race day that a car may be lubricated. Rev. 2-16-2009 Page 2 f 6
Bay Senir High Schl Gym Derby Car Specificatins Open Unlimited Divisin (11 years and lder) Length, Width and Clearance: Width Maximum verall width, including wheels and axels, shall nt exceed 2-3/4 inches. Minimum width f 1-3/4 inches between the wheels is recmmended s the car will clear the center guide strip. Maximum length shall nt exceed 7.0 inches. Minimum clearance f 3/8 inch is recmmended between the bttm f the car and the racing surface t allw clearance fr the center guide strip. Maximum height f 2-3/4 inches is recmmended t allw the car t pass under a timing device in an unrestricted fashin. Wheelbase (distance between the frnt and rear axels) is up t the discretin f the builder. The distance between the frnt edge f the frnt wheel and the rear edge f the rear wheel must nt exceed 7 inches. Wheels and Axles: Only wheels frm the fficial Pinewd Derby kit may be used. Beveling, ruting, tapering, perfrating r any ther significant altering f the shape and perfrmance f the wheels is allwed. The tread may be mdified t enhance its perfrmance. One piece axels may be used. Wheel bearings, washers r bushings are allwed. This includes wheel cvers r hubcaps which serve t keep the wheel hubs frm cntacting the car bdy and serve as a lubricatin well r tap. The car must be free-wheeling with n starting device r ther prpulsin such as adhesives, magnets, rubber bands, mtrs, jets, etc. Indirect prpulsin such as mving weights is allwed as lng as the car s ttal weight des nt exceed 5.0 unces. Weight and Appearance: Weight may nt exceed 5.0 unces. The readings f the fficial race scale will be cnsidered final. Five (5.0) unces will be determined by the fficial race scales n the day f the race. Every effrt will be made t assure that the digital scales are reliable and accurate. The imprtant pint is that all will race accrding t the same standard. Please keep this in mind while weighing yur vehicle n ther scales. The car may be carved, sculpted r sanded in rder t enhance its perfrmance and/r appearance as lng as the car cntinues t meet the size restrictins fr the race. Additinal materials may be added t the car fr the fllwing purpse(s) nly: Weights may be added t increase the weight and/r alter the weight distributin f the car. Weights can be active, i.e. mveable, as lng as they are attached in a manner they will nt separate frm the car. Paints/decals/decratins may be added t alter the appearance and/r aerdynamics f the car. Rev. 2-16-2009 Page 3 f 6
Bay Senir High Schl Gym Glue may be used t adhere the axels t the car bdy. Wd putty, r a similar substance, may be used t repair minr damage t the car. Indented nses are prhibited. Cars shaped like the ne pictured will stage further dwn the track and thus are nt traversing the same distance as the ther cars. A mdificatin t the car will be requested during inspectin t ensure it will start the race with the nse n the starting gate. Detailing must nt include any reference t alchl, smking r drugs. Lubricatin: Any lubricant may be used as lng as it remains n the car. Large amunts f lubricant can ful the track and are prhibited. A car may be lubricated just prir t inspectin. This is the nly time n race day that a car may be lubricated. Rev. 2-16-2009 Page 4 f 6
Bay Senir High Schl Gym Eligibility: Cars and Cntestants The 2009 Lake Sands District Champin cmpetitin is pen t all 1st, 2nd, and 3rd place Lake Sands District Pack Champins frm each den (Tiger Cubs, Wlf, Bear, Webels 1, and Webels 2). Alternates shuld be chsen in each categry at the Pack level in the event a scut is unwilling / unable t race / shw at the district level. The 2009 Lake Sands District Open Champin cmpetitin is pen t all Scuts nt cmpeting in the District Champin cmpetitin and their family members. There will be tw divisins, Cub Scut / Sibling (up thrugh 10 years ld) and Adult (11 and up). Cars in this cmpetitin must have been cnstructed fr this race seasn and must be cnstructed with parts cntained in the SA Official Grand Prix Pinewd Derby Car kit (#17006). Kits frm previus years and frm nn-fficial retailers may cntain parts that are nt sanctined and may be judged as ineligible. Registratin will take place the day f the race. The registratin fee will be $5.00 per entrant per event. If a scut wishes t race a car in multiple events, a $5.00 fee will be assessed fr each event. Scuts must be in unifrm t race. If the Scut des nt have a field unifrm ( Class A ) a utility ( Class B usually a pack t-shirt) unifrm is acceptable. Scuts will cmpete against thers in the same rank. Racing and best Design judging will ccur in five classes: Tiger (1st grade), Wlf (2nd grade), Bear (3rd grade), Webels 1 (4th grade) and Webels 2 (5th grade). In cases where the Cub Scut rank is indeterminate, enter the scut accrding t his grade in schl. It is expected that the scut be present t enter his car in the cmpetitin. In the case f illness r a valid cnflict, an absent scut may be represented by an authrized prxy defined as a sibling r a Cub Scut f similar age wh is nt already cmpeting in the same set f heats. Prxy authrizatin must be btained prir t the race by the Lake Sands District Race Chairman. Awards: Trphies will be presented t the First, Secnd, and Third place fr each rank f scut in the District Champin cmpetitin. Trphies will be presented t the First, Secnd, and Third place fr each f tw Open divisins, Sibling (up t 10 years ld) and Adult Unlimited (11 and up). A Grand Champin award will als be presented t the verall champin. A cmpetitin t determine the verall winner will be held at the cnclusin f all f the rank cmpetitins. A Traveling Award will be presented t the winner f the Cubmaster Challenge. This award will be returned at the next District Pinewd Derby t be presented t the next Cubmaster Challenge winner. Rev. 2-16-2009 Page 5 f 6
Bay Senir High Schl Gym Inspectins and Disputes: Each car must pass inspectin by the Official Inspectin Team befre it may cmpete. The Inspectin Team has the right t disqualify thse cars that d nt meet the rules. Car wners will be infrmed f the vilatins and given an pprtunity t mdify the car t meet these rules. Mdificatins must be successfully cmpleted prir t the end f the race inspectin perid. A pst race inspectin will be held t ensure the car meets the Derby Car Specificatins utlined earlier. If it is determined the car des nt meet the specificatins it will be disqualified and the final results will be mdified as needed. Ungentlemanly r un-sprtsmanlike cnduct by any participant r member f the audience will be grunds fr expulsin frm the cmpetitin and/r race area. Track fficials are respnsible fr the prper cnduct f the cmpetitin. The decisins f these Officials n questins f rule interpretatins and prcedure may be appealed t the event Chairman, but the Chairman s decisins n all matters are final. Cnduct f the Races: The racing frmat will cnsist f several heats. An equal number f races will be run n each f 2 lanes t minimize any discrepancies between the racing surfaces f each lane. Depending n the racing sftware used either; 1- the car with the lwest average time, r fastest speed, shall be declared victr, OR, 2- the duble-eliminatin frmat will be used. In the event f a tie, a tiebreaker race will be held t determine the winner. Car handling respnsibility will fall slely upn the Scut wh will be respnsible fr retrieving the car at the finish and returning the car t the pit area after the heat has been run. A scut with physical limitatins may nminate a prxy subject t the apprval f the Track Master. Grund Rules: If a car leaves a track, the heat will be run again. If the same car leaves the track a secnd time, it will autmatically lse that heat. If a car suffers a mechanical prblem and a repair can be accmplished within 5 minutes, the heat will be run again. If nt, the car will autmatically lse the heat. Rev. 2-16-2009 Page 6 f 6